1 files changed, 0 insertions, 161 deletions
diff --git a/apps/drivers/boards/px4fmu/px4fmu_internal.h b/apps/drivers/boards/px4fmu/px4fmu_internal.h
deleted file mode 100644
index 6550fdf3d..000000000
--- a/apps/drivers/boards/px4fmu/px4fmu_internal.h
+++ /dev/null
@@ -1,161 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2012 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file px4fmu_internal.h
- *
- * PX4FMU internal definitions
- */
-
-#pragma once
-
-/****************************************************************************************************
- * Included Files
- ****************************************************************************************************/
-
-#include <nuttx/config.h>
-#include <nuttx/compiler.h>
-#include <stdint.h>
-
-__BEGIN_DECLS
-
-/* these headers are not C++ safe */
-#include <stm32_internal.h>
-
- 
-/****************************************************************************************************
- * Definitions
- ****************************************************************************************************/
-/* Configuration ************************************************************************************/
-
-#ifdef CONFIG_STM32_SPI2
-#  error "SPI2 is not supported on this board"
-#endif
-
-#if defined(CONFIG_STM32_CAN1)
-#  warning "CAN1 is not supported on this board"
-#endif
-
-/* PX4FMU GPIOs ***********************************************************************************/
-/* LEDs */
-
-#define GPIO_LED1		(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN15)
-#define GPIO_LED2		(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN14)
-
-/* External interrupts */
-#define GPIO_EXTI_COMPASS	(GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTB|GPIO_PIN1)
-// XXX MPU6000 DRDY?
-
-/* SPI chip selects */
-#define GPIO_SPI_CS_GYRO	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN14)
-#define GPIO_SPI_CS_ACCEL	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN15)
-#define GPIO_SPI_CS_MPU		(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN0)
-#define GPIO_SPI_CS_SDCARD	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN4)
-
-/* User GPIOs
- *
- * GPIO0-1 are the buffered high-power GPIOs.
- * GPIO2-5 are the USART2 pins.
- * GPIO6-7 are the CAN2 pins.
- */
-#define GPIO_GPIO0_INPUT	(GPIO_INPUT|GPIO_PULLUP|GPIO_PORTC|GPIO_PIN4)
-#define GPIO_GPIO1_INPUT	(GPIO_INPUT|GPIO_PULLUP|GPIO_PORTC|GPIO_PIN5)
-#define GPIO_GPIO2_INPUT	(GPIO_INPUT|GPIO_PULLUP|GPIO_PORTA|GPIO_PIN0)
-#define GPIO_GPIO3_INPUT	(GPIO_INPUT|GPIO_PULLUP|GPIO_PORTA|GPIO_PIN1)
-#define GPIO_GPIO4_INPUT	(GPIO_INPUT|GPIO_PULLUP|GPIO_PORTA|GPIO_PIN2)
-#define GPIO_GPIO5_INPUT	(GPIO_INPUT|GPIO_PULLUP|GPIO_PORTA|GPIO_PIN3)
-#define GPIO_GPIO6_INPUT	(GPIO_INPUT|GPIO_PULLUP|GPIO_PORTB|GPIO_PIN13)
-#define GPIO_GPIO7_INPUT	(GPIO_INPUT|GPIO_PULLUP|GPIO_PORTB|GPIO_PIN2)
-#define GPIO_GPIO0_OUTPUT	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN4)
-#define GPIO_GPIO1_OUTPUT	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN5)
-#define GPIO_GPIO2_OUTPUT	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN0)
-#define GPIO_GPIO3_OUTPUT	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN1)
-#define GPIO_GPIO4_OUTPUT	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN2)
-#define GPIO_GPIO5_OUTPUT	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN3)
-#define GPIO_GPIO6_OUTPUT	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN13)
-#define GPIO_GPIO7_OUTPUT	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN12)
-#define GPIO_GPIO_DIR		(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN13)
-
-/* USB OTG FS
- *
- * PA9  OTG_FS_VBUS VBUS sensing (also connected to the green LED)
- */
-#define GPIO_OTGFS_VBUS (GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_OPENDRAIN|GPIO_PORTA|GPIO_PIN9)
-
-/* PWM
- *
- * The PX4FMU has five PWM outputs, of which only the output on
- * pin PC8 is fixed assigned to this function. The other four possible
- * pwm sources are the TX, RX, RTS and CTS pins of USART2
- *
- * Alternate function mapping:
- * PC8 - BUZZER - TIM8_CH3/SDIO_D0 /TIM3_CH3/ USART6_CK / DCMI_D2
- */
-
-#ifdef CONFIG_PWM
-#  if defined(CONFIG_STM32_TIM3_PWM)
-#    define BUZZER_PWMCHANNEL 3
-#	 define BUZZER_PWMTIMER 3
-#  elif defined(CONFIG_STM32_TIM8_PWM)
-#    define BUZZER_PWMCHANNEL 3
-#    define BUZZER_PWMTIMER 8
-#  endif
-#endif
-
-/****************************************************************************************************
- * Public Types
- ****************************************************************************************************/
-
-/****************************************************************************************************
- * Public data
- ****************************************************************************************************/
-
-#ifndef __ASSEMBLY__
-
-/****************************************************************************************************
- * Public Functions
- ****************************************************************************************************/
-
-/****************************************************************************************************
- * Name: stm32_spiinitialize
- *
- * Description:
- *   Called to configure SPI chip select GPIO pins for the PX4FMU board.
- *
- ****************************************************************************************************/
-
-extern void stm32_spiinitialize(void);
-
-#endif /* __ASSEMBLY__ */
-
-__END_DECLS