diff options
Diffstat (limited to 'apps/mavlink/waypoints.c')
| -rw-r--r-- | apps/mavlink/waypoints.c | 1134 |
1 files changed, 0 insertions, 1134 deletions
diff --git a/apps/mavlink/waypoints.c b/apps/mavlink/waypoints.c deleted file mode 100644 index a131b143b..000000000 --- a/apps/mavlink/waypoints.c +++ /dev/null @@ -1,1134 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2008-2012 PX4 Development Team. All rights reserved. - * Author: @author Petri Tanskanen <petri.tanskanen@inf.ethz.ch> - * @author Lorenz Meier <lm@inf.ethz.ch> - * @author Thomas Gubler <thomasgubler@student.ethz.ch> - * @author Julian Oes <joes@student.ethz.ch> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/** - * @file waypoints.c - * MAVLink waypoint protocol implementation (BSD-relicensed). - */ - -#include <math.h> -#include <sys/prctl.h> -#include <unistd.h> -#include <stdio.h> - -#include "missionlib.h" -#include "waypoints.h" -#include "util.h" - -#ifndef FM_PI -#define FM_PI 3.1415926535897932384626433832795f -#endif - -bool debug = false; -bool verbose = false; - - -#define MAVLINK_WPM_NO_PRINTF - -uint8_t mavlink_wpm_comp_id = MAV_COMP_ID_MISSIONPLANNER; - -void mavlink_wpm_init(mavlink_wpm_storage *state) -{ - // Set all waypoints to zero - - // Set count to zero - state->size = 0; - state->max_size = MAVLINK_WPM_MAX_WP_COUNT; - state->current_state = MAVLINK_WPM_STATE_IDLE; - state->current_partner_sysid = 0; - state->current_partner_compid = 0; - state->timestamp_lastaction = 0; - state->timestamp_last_send_setpoint = 0; - state->timeout = MAVLINK_WPM_PROTOCOL_TIMEOUT_DEFAULT; - state->delay_setpoint = MAVLINK_WPM_SETPOINT_DELAY_DEFAULT; - state->idle = false; ///< indicates if the system is following the waypoints or is waiting - state->current_active_wp_id = -1; ///< id of current waypoint - state->yaw_reached = false; ///< boolean for yaw attitude reached - state->pos_reached = false; ///< boolean for position reached - state->timestamp_lastoutside_orbit = 0;///< timestamp when the MAV was last outside the orbit or had the wrong yaw value - state->timestamp_firstinside_orbit = 0;///< timestamp when the MAV was the first time after a waypoint change inside the orbit and had the correct yaw value - -} - -/* - * @brief Sends an waypoint ack message - */ -void mavlink_wpm_send_waypoint_ack(uint8_t sysid, uint8_t compid, uint8_t type) -{ - mavlink_message_t msg; - mavlink_mission_ack_t wpa; - - wpa.target_system = wpm->current_partner_sysid; - wpa.target_component = wpm->current_partner_compid; - wpa.type = type; - - mavlink_msg_mission_ack_encode(mavlink_system.sysid, mavlink_wpm_comp_id, &msg, &wpa); - mavlink_missionlib_send_message(&msg); - - // FIXME TIMING usleep(paramClient->getParamValue("PROTOCOLDELAY")); - - if (MAVLINK_WPM_TEXT_FEEDBACK) { -#ifdef MAVLINK_WPM_NO_PRINTF - mavlink_missionlib_send_gcs_string("Sent waypoint ACK"); -#else - - if (MAVLINK_WPM_VERBOSE) printf("Sent waypoint ack (%u) to ID %u\n", wpa.type, wpa.target_system); - -#endif - mavlink_missionlib_send_gcs_string("Sent waypoint ACK"); - } -} - -/* - * @brief Broadcasts the new target waypoint and directs the MAV to fly there - * - * This function broadcasts its new active waypoint sequence number and - * sends a message to the controller, advising it to fly to the coordinates - * of the waypoint with a given orientation - * - * @param seq The waypoint sequence number the MAV should fly to. - */ -void mavlink_wpm_send_waypoint_current(uint16_t seq) -{ - if (seq < wpm->size) { - mavlink_mission_item_t *cur = &(wpm->waypoints[seq]); - - mavlink_message_t msg; - mavlink_mission_current_t wpc; - - wpc.seq = cur->seq; - - mavlink_msg_mission_current_encode(mavlink_system.sysid, mavlink_wpm_comp_id, &msg, &wpc); - mavlink_missionlib_send_message(&msg); - - // FIXME TIMING usleep(paramClient->getParamValue("PROTOCOLDELAY")); - - if (MAVLINK_WPM_TEXT_FEEDBACK) mavlink_missionlib_send_gcs_string("Set current waypoint\n"); //// printf("Broadcasted new current waypoint %u\n", wpc.seq); - - } else { - if (MAVLINK_WPM_TEXT_FEEDBACK) mavlink_missionlib_send_gcs_string("ERROR: wp index out of bounds\n"); - } -} - -/* - * @brief Directs the MAV to fly to a position - * - * Sends a message to the controller, advising it to fly to the coordinates - * of the waypoint with a given orientation - * - * @param seq The waypoint sequence number the MAV should fly to. - */ -void mavlink_wpm_send_setpoint(uint16_t seq) -{ - if (seq < wpm->size) { - mavlink_mission_item_t *cur = &(wpm->waypoints[seq]); - mavlink_missionlib_current_waypoint_changed(cur->seq, cur->param1, - cur->param2, cur->param3, cur->param4, cur->x, - cur->y, cur->z, cur->frame, cur->command); - - wpm->timestamp_last_send_setpoint = mavlink_missionlib_get_system_timestamp(); - - } else { - if (MAVLINK_WPM_TEXT_FEEDBACK) mavlink_missionlib_send_gcs_string("ERROR: Waypoint index out of bounds\n"); //// if (verbose) // printf("ERROR: index out of bounds\n"); - } -} - -void mavlink_wpm_send_waypoint_count(uint8_t sysid, uint8_t compid, uint16_t count) -{ - mavlink_message_t msg; - mavlink_mission_count_t wpc; - - wpc.target_system = wpm->current_partner_sysid; - wpc.target_component = wpm->current_partner_compid; - wpc.count = count; - - mavlink_msg_mission_count_encode(mavlink_system.sysid, mavlink_wpm_comp_id, &msg, &wpc); - mavlink_missionlib_send_message(&msg); - - if (MAVLINK_WPM_TEXT_FEEDBACK) mavlink_missionlib_send_gcs_string("Sent waypoint count"); //// if (verbose) // printf("Sent waypoint count (%u) to ID %u\n", wpc.count, wpc.target_system); - - // FIXME TIMING usleep(paramClient->getParamValue("PROTOCOLDELAY")); -} - -void mavlink_wpm_send_waypoint(uint8_t sysid, uint8_t compid, uint16_t seq) -{ - if (seq < wpm->size) { - mavlink_message_t msg; - mavlink_mission_item_t *wp = &(wpm->waypoints[seq]); - wp->target_system = wpm->current_partner_sysid; - wp->target_component = wpm->current_partner_compid; - mavlink_msg_mission_item_encode(mavlink_system.sysid, mavlink_wpm_comp_id, &msg, wp); - mavlink_missionlib_send_message(&msg); - - if (MAVLINK_WPM_TEXT_FEEDBACK) mavlink_missionlib_send_gcs_string("Sent waypoint"); //// if (verbose) // printf("Sent waypoint %u to ID %u\n", wp->seq, wp->target_system); - - // FIXME TIMING usleep(paramClient->getParamValue("PROTOCOLDELAY")); - - } else { - if (MAVLINK_WPM_TEXT_FEEDBACK) mavlink_missionlib_send_gcs_string("ERROR: Waypoint index out of bounds\n"); - } -} - -void mavlink_wpm_send_waypoint_request(uint8_t sysid, uint8_t compid, uint16_t seq) -{ - if (seq < wpm->max_size) { - mavlink_message_t msg; - mavlink_mission_request_t wpr; - wpr.target_system = wpm->current_partner_sysid; - wpr.target_component = wpm->current_partner_compid; - wpr.seq = seq; - mavlink_msg_mission_request_encode(mavlink_system.sysid, mavlink_wpm_comp_id, &msg, &wpr); - mavlink_missionlib_send_message(&msg); - - if (MAVLINK_WPM_TEXT_FEEDBACK) mavlink_missionlib_send_gcs_string("Sent waypoint request"); //// if (verbose) // printf("Sent waypoint request %u to ID %u\n", wpr.seq, wpr.target_system); - - // FIXME TIMING usleep(paramClient->getParamValue("PROTOCOLDELAY")); - - } else { - if (MAVLINK_WPM_TEXT_FEEDBACK) mavlink_missionlib_send_gcs_string("ERROR: Waypoint index exceeds list capacity\n"); - } -} - -/* - * @brief emits a message that a waypoint reached - * - * This function broadcasts a message that a waypoint is reached. - * - * @param seq The waypoint sequence number the MAV has reached. - */ -void mavlink_wpm_send_waypoint_reached(uint16_t seq) -{ - mavlink_message_t msg; - mavlink_mission_item_reached_t wp_reached; - - wp_reached.seq = seq; - - mavlink_msg_mission_item_reached_encode(mavlink_system.sysid, mavlink_wpm_comp_id, &msg, &wp_reached); - mavlink_missionlib_send_message(&msg); - - if (MAVLINK_WPM_TEXT_FEEDBACK) mavlink_missionlib_send_gcs_string("Sent waypoint reached message"); //// if (verbose) // printf("Sent waypoint %u reached message\n", wp_reached.seq); - - // FIXME TIMING usleep(paramClient->getParamValue("PROTOCOLDELAY")); -} - -//float mavlink_wpm_distance_to_segment(uint16_t seq, float x, float y, float z) -//{ -// if (seq < wpm->size) -// { -// mavlink_mission_item_t *cur = waypoints->at(seq); -// -// const PxVector3 A(cur->x, cur->y, cur->z); -// const PxVector3 C(x, y, z); -// -// // seq not the second last waypoint -// if ((uint16_t)(seq+1) < wpm->size) -// { -// mavlink_mission_item_t *next = waypoints->at(seq+1); -// const PxVector3 B(next->x, next->y, next->z); -// const float r = (B-A).dot(C-A) / (B-A).lengthSquared(); -// if (r >= 0 && r <= 1) -// { -// const PxVector3 P(A + r*(B-A)); -// return (P-C).length(); -// } -// else if (r < 0.f) -// { -// return (C-A).length(); -// } -// else -// { -// return (C-B).length(); -// } -// } -// else -// { -// return (C-A).length(); -// } -// } -// else -// { -// // if (verbose) // printf("ERROR: index out of bounds\n"); -// } -// return -1.f; -//} - -/* - * Calculate distance in global frame. - * - * The distance calculation is based on the WGS84 geoid (GPS) - */ -float mavlink_wpm_distance_to_point_global_wgs84(uint16_t seq, float lat, float lon, float alt) -{ - //TODO: implement for z once altidude contoller is implemented - - static uint16_t counter; - -// if(counter % 10 == 0) printf(" x = %.10f, y = %.10f\n", x, y); - if (seq < wpm->size) { - mavlink_mission_item_t *cur = &(wpm->waypoints[seq]); - - double current_x_rad = cur->x / 180.0 * M_PI; - double current_y_rad = cur->y / 180.0 * M_PI; - double x_rad = lat / 180.0 * M_PI; - double y_rad = lon / 180.0 * M_PI; - - double d_lat = x_rad - current_x_rad; - double d_lon = y_rad - current_y_rad; - - double a = sin(d_lat / 2.0) * sin(d_lat / 2.0) + sin(d_lon / 2.0) * sin(d_lon / 2.0f) * cos(current_x_rad) * cos(x_rad); - double c = 2 * atan2(sqrt(a), sqrt(1 - a)); - - const double radius_earth = 6371000.0; - - return radius_earth * c; - - } else { - return -1.0f; - } - - counter++; - -} - -/* - * Calculate distance in local frame (NED) - */ -float mavlink_wpm_distance_to_point_local(uint16_t seq, float x, float y, float z) -{ - if (seq < wpm->size) { - mavlink_mission_item_t *cur = &(wpm->waypoints[seq]); - - float dx = (cur->x - x); - float dy = (cur->y - y); - float dz = (cur->z - z); - - return sqrt(dx * dx + dy * dy + dz * dz); - - } else { - return -1.0f; - } -} - -void check_waypoints_reached(uint64_t now, const struct vehicle_global_position_s *global_pos, struct vehicle_local_position_s *local_pos) -{ - static uint16_t counter; - - // Do not flood the precious wireless link with debug data - // if (wpm->size > 0 && counter % 10 == 0) { - // printf("Currect active waypoint id: %i\n", wpm->current_active_wp_id); - // } - - - if (wpm->current_active_wp_id < wpm->size) { - - float orbit = wpm->waypoints[wpm->current_active_wp_id].param2; - int coordinate_frame = wpm->waypoints[wpm->current_active_wp_id].frame; - float dist = -1.0f; - - if (coordinate_frame == (int)MAV_FRAME_GLOBAL) { - dist = mavlink_wpm_distance_to_point_global_wgs84(wpm->current_active_wp_id, (float)global_pos->lat * 1e-7f, (float)global_pos->lon * 1e-7f, global_pos->alt); - - } else if (coordinate_frame == (int)MAV_FRAME_GLOBAL_RELATIVE_ALT) { - dist = mavlink_wpm_distance_to_point_global_wgs84(wpm->current_active_wp_id, global_pos->lat, global_pos->lon, global_pos->relative_alt); - - } else if (coordinate_frame == (int)MAV_FRAME_LOCAL_ENU || coordinate_frame == (int)MAV_FRAME_LOCAL_NED) { - dist = mavlink_wpm_distance_to_point_local(wpm->current_active_wp_id, local_pos->x, local_pos->y, local_pos->z); - - } else if (coordinate_frame == (int)MAV_FRAME_MISSION) { - /* Check if conditions of mission item are satisfied */ - // XXX TODO - } - - if (dist >= 0.f && dist <= orbit /*&& wpm->yaw_reached*/) { //TODO implement yaw - wpm->pos_reached = true; - - if (counter % 100 == 0) - printf("Setpoint reached: %0.4f, orbit: %.4f\n", dist, orbit); - } - -// else -// { -// if(counter % 100 == 0) -// printf("Setpoint not reached yet: %0.4f, orbit: %.4f, coordinate frame: %d\n",dist, orbit, coordinate_frame); -// } - } - - //check if the current waypoint was reached - if (wpm->pos_reached /*wpm->yaw_reached &&*/ && !wpm->idle) { - if (wpm->current_active_wp_id < wpm->size) { - mavlink_mission_item_t *cur_wp = &(wpm->waypoints[wpm->current_active_wp_id]); - - if (wpm->timestamp_firstinside_orbit == 0) { - // Announce that last waypoint was reached - printf("Reached waypoint %u for the first time \n", cur_wp->seq); - mavlink_wpm_send_waypoint_reached(cur_wp->seq); - wpm->timestamp_firstinside_orbit = now; - } - - // check if the MAV was long enough inside the waypoint orbit - //if (now-timestamp_lastoutside_orbit > (cur_wp->hold_time*1000)) - if (now - wpm->timestamp_firstinside_orbit >= cur_wp->param2 * 1000) { - printf("Reached waypoint %u long enough \n", cur_wp->seq); - - if (cur_wp->autocontinue) { - cur_wp->current = 0; - - if (wpm->current_active_wp_id == wpm->size - 1 && wpm->size > 1) { - /* the last waypoint was reached, if auto continue is - * activated restart the waypoint list from the beginning - */ - wpm->current_active_wp_id = 0; - - } else { - if ((uint16_t)(wpm->current_active_wp_id + 1) < wpm->size) - wpm->current_active_wp_id++; - } - - // Fly to next waypoint - wpm->timestamp_firstinside_orbit = 0; - mavlink_wpm_send_waypoint_current(wpm->current_active_wp_id); - mavlink_wpm_send_setpoint(wpm->current_active_wp_id); - wpm->waypoints[wpm->current_active_wp_id].current = true; - wpm->pos_reached = false; - wpm->yaw_reached = false; - printf("Set new waypoint (%u)\n", wpm->current_active_wp_id); - } - } - } - - } else { - wpm->timestamp_lastoutside_orbit = now; - } - - counter++; -} - - -int mavlink_waypoint_eventloop(uint64_t now, const struct vehicle_global_position_s *global_position, struct vehicle_local_position_s *local_position) -{ - /* check for timed-out operations */ - if (now - wpm->timestamp_lastaction > wpm->timeout && wpm->current_state != MAVLINK_WPM_STATE_IDLE) { - -#ifdef MAVLINK_WPM_NO_PRINTF - mavlink_missionlib_send_gcs_string("Operation timeout switching -> IDLE"); -#else - - if (MAVLINK_WPM_VERBOSE) printf("Last operation (state=%u) timed out, changing state to MAVLINK_WPM_STATE_IDLE\n", wpm->current_state); - -#endif - wpm->current_state = MAVLINK_WPM_STATE_IDLE; - wpm->current_count = 0; - wpm->current_partner_sysid = 0; - wpm->current_partner_compid = 0; - wpm->current_wp_id = -1; - - if (wpm->size == 0) { - wpm->current_active_wp_id = -1; - } - } - - // Do NOT continously send the current WP, since we're not loosing messages - // if (now - wpm->timestamp_last_send_setpoint > wpm->delay_setpoint && wpm->current_active_wp_id < wpm->size) { - // mavlink_wpm_send_setpoint(wpm->current_active_wp_id); - // } - - check_waypoints_reached(now, global_position , local_position); - - return OK; -} - - -void mavlink_wpm_message_handler(const mavlink_message_t *msg, const struct vehicle_global_position_s *global_pos , struct vehicle_local_position_s *local_pos) -{ - uint64_t now = mavlink_missionlib_get_system_timestamp(); - - switch (msg->msgid) { -// case MAVLINK_MSG_ID_ATTITUDE: -// { -// if(msg->sysid == mavlink_system.sysid && wpm->current_active_wp_id < wpm->size) -// { -// mavlink_mission_item_t *wp = &(wpm->waypoints[wpm->current_active_wp_id]); -// if(wp->frame == MAV_FRAME_LOCAL_ENU || wp->frame == MAV_FRAME_LOCAL_NED) -// { -// mavlink_attitude_t att; -// mavlink_msg_attitude_decode(msg, &att); -// float yaw_tolerance = wpm->accept_range_yaw; -// //compare current yaw -// if (att.yaw - yaw_tolerance >= 0.0f && att.yaw + yaw_tolerance < 2.f*FM_PI) -// { -// if (att.yaw - yaw_tolerance <= wp->param4 && att.yaw + yaw_tolerance >= wp->param4) -// wpm->yaw_reached = true; -// } -// else if(att.yaw - yaw_tolerance < 0.0f) -// { -// float lowerBound = 360.0f + att.yaw - yaw_tolerance; -// if (lowerBound < wp->param4 || wp->param4 < att.yaw + yaw_tolerance) -// wpm->yaw_reached = true; -// } -// else -// { -// float upperBound = att.yaw + yaw_tolerance - 2.f*FM_PI; -// if (att.yaw - yaw_tolerance < wp->param4 || wp->param4 < upperBound) -// wpm->yaw_reached = true; -// } -// } -// } -// break; -// } -// -// case MAVLINK_MSG_ID_LOCAL_POSITION_NED: -// { -// if(msg->sysid == mavlink_system.sysid && wpm->current_active_wp_id < wpm->size) -// { -// mavlink_mission_item_t *wp = &(wpm->waypoints[wpm->current_active_wp_id]); -// -// if(wp->frame == MAV_FRAME_LOCAL_ENU || MAV_FRAME_LOCAL_NED) -// { -// mavlink_local_position_ned_t pos; -// mavlink_msg_local_position_ned_decode(msg, &pos); -// //// if (debug) // printf("Received new position: x: %f | y: %f | z: %f\n", pos.x, pos.y, pos.z); -// -// wpm->pos_reached = false; -// -// // compare current position (given in message) with current waypoint -// float orbit = wp->param1; -// -// float dist; -//// if (wp->param2 == 0) -//// { -//// // FIXME segment distance -//// //dist = mavlink_wpm_distance_to_segment(current_active_wp_id, pos.x, pos.y, pos.z); -//// } -//// else -//// { -// dist = mavlink_wpm_distance_to_point(wpm->current_active_wp_id, pos.x, pos.y, pos.z); -//// } -// -// if (dist >= 0.f && dist <= orbit && wpm->yaw_reached) -// { -// wpm->pos_reached = true; -// } -// } -// } -// break; -// } - -// case MAVLINK_MSG_ID_CMD: // special action from ground station -// { -// mavlink_cmd_t action; -// mavlink_msg_cmd_decode(msg, &action); -// if(action.target == mavlink_system.sysid) -// { -// // if (verbose) std::cerr << "Waypoint: received message with action " << action.action << std::endl; -// switch (action.action) -// { -// // case MAV_ACTION_LAUNCH: -// // // if (verbose) std::cerr << "Launch received" << std::endl; -// // current_active_wp_id = 0; -// // if (wpm->size>0) -// // { -// // setActive(waypoints[current_active_wp_id]); -// // } -// // else -// // // if (verbose) std::cerr << "No launch, waypointList empty" << std::endl; -// // break; -// -// // case MAV_ACTION_CONTINUE: -// // // if (verbose) std::c -// // err << "Continue received" << std::endl; -// // idle = false; -// // setActive(waypoints[current_active_wp_id]); -// // break; -// -// // case MAV_ACTION_HALT: -// // // if (verbose) std::cerr << "Halt received" << std::endl; -// // idle = true; -// // break; -// -// // default: -// // // if (verbose) std::cerr << "Unknown action received with id " << action.action << ", no action taken" << std::endl; -// // break; -// } -// } -// break; -// } - - case MAVLINK_MSG_ID_MISSION_ACK: { - mavlink_mission_ack_t wpa; - mavlink_msg_mission_ack_decode(msg, &wpa); - - if ((msg->sysid == wpm->current_partner_sysid && msg->compid == wpm->current_partner_compid) && (wpa.target_system == mavlink_system.sysid /*&& wpa.target_component == mavlink_wpm_comp_id*/)) { - wpm->timestamp_lastaction = now; - - if (wpm->current_state == MAVLINK_WPM_STATE_SENDLIST || wpm->current_state == MAVLINK_WPM_STATE_SENDLIST_SENDWPS) { - if (wpm->current_wp_id == wpm->size - 1) { -#ifdef MAVLINK_WPM_NO_PRINTF - mavlink_missionlib_send_gcs_string("Got last WP ACK state -> IDLE"); -#else - - if (MAVLINK_WPM_VERBOSE) printf("Received ACK after having sent last waypoint, going to state MAVLINK_WPM_STATE_IDLE\n"); - -#endif - wpm->current_state = MAVLINK_WPM_STATE_IDLE; - wpm->current_wp_id = 0; - } - } - - } else { -#ifdef MAVLINK_WPM_NO_PRINTF - mavlink_missionlib_send_gcs_string("REJ. WP CMD: curr partner id mismatch"); -#else - - if (MAVLINK_WPM_VERBOSE) printf("IGNORED WAYPOINT COMMAND BECAUSE TARGET SYSTEM AND COMPONENT OR COMM PARTNER ID MISMATCH\n"); - -#endif - } - - break; - } - - case MAVLINK_MSG_ID_MISSION_SET_CURRENT: { - mavlink_mission_set_current_t wpc; - mavlink_msg_mission_set_current_decode(msg, &wpc); - - if (wpc.target_system == mavlink_system.sysid /*&& wpc.target_component == mavlink_wpm_comp_id*/) { - wpm->timestamp_lastaction = now; - - if (wpm->current_state == MAVLINK_WPM_STATE_IDLE) { - if (wpc.seq < wpm->size) { - // if (verbose) // printf("Received MAVLINK_MSG_ID_MISSION_ITEM_SET_CURRENT\n"); - wpm->current_active_wp_id = wpc.seq; - uint32_t i; - - for (i = 0; i < wpm->size; i++) { - if (i == wpm->current_active_wp_id) { - wpm->waypoints[i].current = true; - - } else { - wpm->waypoints[i].current = false; - } - } - -#ifdef MAVLINK_WPM_NO_PRINTF - mavlink_missionlib_send_gcs_string("NEW WP SET"); -#else - - if (MAVLINK_WPM_VERBOSE) printf("New current waypoint %u\n", wpm->current_active_wp_id); - -#endif - wpm->yaw_reached = false; - wpm->pos_reached = false; - mavlink_wpm_send_waypoint_current(wpm->current_active_wp_id); - mavlink_wpm_send_setpoint(wpm->current_active_wp_id); - wpm->timestamp_firstinside_orbit = 0; - - } else { -#ifdef MAVLINK_WPM_NO_PRINTF - mavlink_missionlib_send_gcs_string("IGN WP CURR CMD: Not in list"); -#else - - if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_SET_CURRENT: Index out of bounds\n"); - -#endif - } - - } else { -#ifdef MAVLINK_WPM_NO_PRINTF - mavlink_missionlib_send_gcs_string("IGN WP CURR CMD: Busy"); -#else - - if (MAVLINK_WPM_VERBOSE) printf("IGNORED WAYPOINT COMMAND BECAUSE NOT IN IDLE STATE\n"); - -#endif - } - - } else { -#ifdef MAVLINK_WPM_NO_PRINTF - mavlink_missionlib_send_gcs_string("REJ. WP CMD: target id mismatch"); -#else - - if (MAVLINK_WPM_VERBOSE) printf("IGNORED WAYPOINT COMMAND BECAUSE TARGET SYSTEM AND COMPONENT OR COMM PARTNER ID MISMATCH\n"); - -#endif - } - - break; - } - - case MAVLINK_MSG_ID_MISSION_REQUEST_LIST: { - mavlink_mission_request_list_t wprl; - mavlink_msg_mission_request_list_decode(msg, &wprl); - - if (wprl.target_system == mavlink_system.sysid /*&& wprl.target_component == mavlink_wpm_comp_id*/) { - wpm->timestamp_lastaction = now; - - if (wpm->current_state == MAVLINK_WPM_STATE_IDLE || wpm->current_state == MAVLINK_WPM_STATE_SENDLIST) { - if (wpm->size > 0) { - //if (verbose && wpm->current_state == MAVLINK_WPM_STATE_IDLE) // printf("Got MAVLINK_MSG_ID_MISSION_ITEM_REQUEST_LIST from %u changing state to MAVLINK_WPM_STATE_SENDLIST\n", msg->sysid); -// if (verbose && wpm->current_state == MAVLINK_WPM_STATE_SENDLIST) // printf("Got MAVLINK_MSG_ID_MISSION_ITEM_REQUEST_LIST again from %u staying in state MAVLINK_WPM_STATE_SENDLIST\n", msg->sysid); - wpm->current_state = MAVLINK_WPM_STATE_SENDLIST; - wpm->current_wp_id = 0; - wpm->current_partner_sysid = msg->sysid; - wpm->current_partner_compid = msg->compid; - - } else { - // if (verbose) // printf("Got MAVLINK_MSG_ID_MISSION_ITEM_REQUEST_LIST from %u but have no waypoints, staying in \n", msg->sysid); - } - - wpm->current_count = wpm->size; - mavlink_wpm_send_waypoint_count(msg->sysid, msg->compid, wpm->current_count); - - } else { - // if (verbose) // printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_REQUEST_LIST because i'm doing something else already (state=%i).\n", wpm->current_state); - } - } else { - // if (verbose) // printf("IGNORED WAYPOINT COMMAND BECAUSE TARGET SYSTEM AND COMPONENT MISMATCH\n"); - } - - break; - } - - case MAVLINK_MSG_ID_MISSION_REQUEST: { - mavlink_mission_request_t wpr; - mavlink_msg_mission_request_decode(msg, &wpr); - - if (msg->sysid == wpm->current_partner_sysid && msg->compid == wpm->current_partner_compid && wpr.target_system == mavlink_system.sysid /*&& wpr.target_component == mavlink_wpm_comp_id*/) { - wpm->timestamp_lastaction = now; - - //ensure that we are in the correct state and that the first request has id 0 and the following requests have either the last id (re-send last waypoint) or last_id+1 (next waypoint) - if ((wpm->current_state == MAVLINK_WPM_STATE_SENDLIST && wpr.seq == 0) || (wpm->current_state == MAVLINK_WPM_STATE_SENDLIST_SENDWPS && (wpr.seq == wpm->current_wp_id || wpr.seq == wpm->current_wp_id + 1) && wpr.seq < wpm->size)) { - if (wpm->current_state == MAVLINK_WPM_STATE_SENDLIST) { -#ifdef MAVLINK_WPM_NO_PRINTF - mavlink_missionlib_send_gcs_string("GOT WP REQ, state -> SEND"); -#else - - if (MAVLINK_WPM_VERBOSE) printf("Got MAVLINK_MSG_ID_MISSION_ITEM_REQUEST of waypoint %u from %u changing state to MAVLINK_WPM_STATE_SENDLIST_SENDWPS\n", wpr.seq, msg->sysid); - -#endif - } - - if (wpm->current_state == MAVLINK_WPM_STATE_SENDLIST_SENDWPS && wpr.seq == wpm->current_wp_id + 1) { -#ifdef MAVLINK_WPM_NO_PRINTF - mavlink_missionlib_send_gcs_string("GOT 2nd WP REQ"); -#else - - if (MAVLINK_WPM_VERBOSE) printf("Got MAVLINK_MSG_ID_MISSION_ITEM_REQUEST of waypoint %u from %u staying in state MAVLINK_WPM_STATE_SENDLIST_SENDWPS\n", wpr.seq, msg->sysid); - -#endif - } - - if (wpm->current_state == MAVLINK_WPM_STATE_SENDLIST_SENDWPS && wpr.seq == wpm->current_wp_id) { -#ifdef MAVLINK_WPM_NO_PRINTF - mavlink_missionlib_send_gcs_string("GOT 2nd WP REQ"); -#else - - if (MAVLINK_WPM_VERBOSE) printf("Got MAVLINK_MSG_ID_MISSION_ITEM_REQUEST of waypoint %u (again) from %u staying in state MAVLINK_WPM_STATE_SENDLIST_SENDWPS\n", wpr.seq, msg->sysid); - -#endif - } - - wpm->current_state = MAVLINK_WPM_STATE_SENDLIST_SENDWPS; - wpm->current_wp_id = wpr.seq; - mavlink_wpm_send_waypoint(wpm->current_partner_sysid, wpm->current_partner_compid, wpr.seq); - - } else { - // if (verbose) - { - if (!(wpm->current_state == MAVLINK_WPM_STATE_SENDLIST || wpm->current_state == MAVLINK_WPM_STATE_SENDLIST_SENDWPS)) { -#ifdef MAVLINK_WPM_NO_PRINTF - mavlink_missionlib_send_gcs_string("REJ. WP CMD: Busy"); -#else - - if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_REQUEST because i'm doing something else already (state=%i).\n", wpm->current_state); - -#endif - break; - - } else if (wpm->current_state == MAVLINK_WPM_STATE_SENDLIST) { - if (wpr.seq != 0) { -#ifdef MAVLINK_WPM_NO_PRINTF - mavlink_missionlib_send_gcs_string("REJ. WP CMD: First id != 0"); -#else - - if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_REQUEST because the first requested waypoint ID (%u) was not 0.\n", wpr.seq); - -#endif - } - - } else if (wpm->current_state == MAVLINK_WPM_STATE_SENDLIST_SENDWPS) { - if (wpr.seq != wpm->current_wp_id && wpr.seq != wpm->current_wp_id + 1) { -#ifdef MAVLINK_WPM_NO_PRINTF - mavlink_missionlib_send_gcs_string("REJ. WP CMD: Req. WP was unexpected"); -#else - - if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_REQUEST because the requested waypoint ID (%u) was not the expected (%u or %u).\n", wpr.seq, wpm->current_wp_id, wpm->current_wp_id + 1); - -#endif - - } else if (wpr.seq >= wpm->size) { -#ifdef MAVLINK_WPM_NO_PRINTF - mavlink_missionlib_send_gcs_string("REJ. WP CMD: Req. WP not in list"); -#else - - if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_REQUEST because the requested waypoint ID (%u) was out of bounds.\n", wpr.seq); - -#endif - } - - } else { -#ifdef MAVLINK_WPM_NO_PRINTF - mavlink_missionlib_send_gcs_string("REJ. WP CMD: ?"); -#else - - if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_REQUEST - FIXME: missed error description\n"); - -#endif - } - } - } - - } else { - //we we're target but already communicating with someone else - if ((wpr.target_system == mavlink_system.sysid /*&& wpr.target_component == mavlink_wpm_comp_id*/) && !(msg->sysid == wpm->current_partner_sysid && msg->compid == wpm->current_partner_compid)) { -#ifdef MAVLINK_WPM_NO_PRINTF - mavlink_missionlib_send_gcs_string("REJ. WP CMD: Busy"); -#else - - if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_REQUEST from ID %u because i'm already talking to ID %u.\n", msg->sysid, wpm->current_partner_sysid); - -#endif - - } else { -#ifdef MAVLINK_WPM_NO_PRINTF - mavlink_missionlib_send_gcs_string("REJ. WP CMD: target id mismatch"); -#else - - if (MAVLINK_WPM_VERBOSE) printf("IGNORED WAYPOINT COMMAND BECAUSE TARGET SYSTEM AND COMPONENT OR COMM PARTNER ID MISMATCH\n"); - -#endif - } - - } - - break; - } - - case MAVLINK_MSG_ID_MISSION_COUNT: { - mavlink_mission_count_t wpc; - mavlink_msg_mission_count_decode(msg, &wpc); - - if (wpc.target_system == mavlink_system.sysid/* && wpc.target_component == mavlink_wpm_comp_id*/) { - wpm->timestamp_lastaction = now; - - if (wpm->current_state == MAVLINK_WPM_STATE_IDLE || (wpm->current_state == MAVLINK_WPM_STATE_GETLIST && wpm->current_wp_id == 0)) { -// printf("wpc count in: %d\n",wpc.count); -// printf("Comp id: %d\n",msg->compid); -// printf("Current partner sysid: %d\n",wpm->current_partner_sysid); - - if (wpc.count > 0) { - if (wpm->current_state == MAVLINK_WPM_STATE_IDLE) { -#ifdef MAVLINK_WPM_NO_PRINTF - mavlink_missionlib_send_gcs_string("WP CMD OK: state -> GETLIST"); -#else - - if (MAVLINK_WPM_VERBOSE) printf("Got MAVLINK_MSG_ID_MISSION_ITEM_COUNT (%u) from %u changing state to MAVLINK_WPM_STATE_GETLIST\n", wpc.count, msg->sysid); - -#endif - } - - if (wpm->current_state == MAVLINK_WPM_STATE_GETLIST) { -#ifdef MAVLINK_WPM_NO_PRINTF - mavlink_missionlib_send_gcs_string("WP CMD OK AGAIN"); -#else - - if (MAVLINK_WPM_VERBOSE) printf("Got MAVLINK_MSG_ID_MISSION_ITEM_COUNT (%u) again from %u\n", wpc.count, msg->sysid); - -#endif - } - - wpm->current_state = MAVLINK_WPM_STATE_GETLIST; - wpm->current_wp_id = 0; - wpm->current_partner_sysid = msg->sysid; - wpm->current_partner_compid = msg->compid; - wpm->current_count = wpc.count; - -#ifdef MAVLINK_WPM_NO_PRINTF - mavlink_missionlib_send_gcs_string("CLR RCV BUF: READY"); -#else - - if (MAVLINK_WPM_VERBOSE) printf("clearing receive buffer and readying for receiving waypoints\n"); - -#endif - wpm->rcv_size = 0; - //while(waypoints_receive_buffer->size() > 0) -// { -// delete waypoints_receive_buffer->back(); -// waypoints_receive_buffer->pop_back(); -// } - - mavlink_wpm_send_waypoint_request(wpm->current_partner_sysid, wpm->current_partner_compid, wpm->current_wp_id); - - } else if (wpc.count == 0) { -#ifdef MAVLINK_WPM_NO_PRINTF - mavlink_missionlib_send_gcs_string("COUNT 0"); -#else - - if (MAVLINK_WPM_VERBOSE) printf("got waypoint count of 0, clearing waypoint list and staying in state MAVLINK_WPM_STATE_IDLE\n"); - -#endif - wpm->rcv_size = 0; - //while(waypoints_receive_buffer->size() > 0) -// { -// delete waypoints->back(); -// waypoints->pop_back(); -// } - wpm->current_active_wp_id = -1; - wpm->yaw_reached = false; - wpm->pos_reached = false; - break; - - } else { -#ifdef MAVLINK_WPM_NO_PRINTF - mavlink_missionlib_send_gcs_string("IGN WP CMD"); -#else - - if (MAVLINK_WPM_VERBOSE) printf("Ignoring MAVLINK_MSG_ID_MISSION_ITEM_COUNT from %u with count of %u\n", msg->sysid, wpc.count); - -#endif - } - - } else { - if (!(wpm->current_state == MAVLINK_WPM_STATE_IDLE || wpm->current_state == MAVLINK_WPM_STATE_GETLIST)) { -#ifdef MAVLINK_WPM_NO_PRINTF - mavlink_missionlib_send_gcs_string("REJ. WP CMD: Busy"); -#else - - if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_COUNT because i'm doing something else already (state=%i).\n", wpm->current_state); - -#endif - - } else if (wpm->current_state == MAVLINK_WPM_STATE_GETLIST && wpm->current_wp_id != 0) { -#ifdef MAVLINK_WPM_NO_PRINTF - mavlink_missionlib_send_gcs_string("REJ. WP CMD: Busy"); -#else - - if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_COUNT because i'm already receiving waypoint %u.\n", wpm->current_wp_id); - -#endif - - } else { -#ifdef MAVLINK_WPM_NO_PRINTF - mavlink_missionlib_send_gcs_string("REJ. WP CMD: ?"); -#else - - if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_COUNT - FIXME: missed error description\n"); - -#endif - } - } - - } else { -#ifdef MAVLINK_WPM_NO_PRINTF - mavlink_missionlib_send_gcs_string("REJ. WP CMD: target id mismatch"); -#else - - if (MAVLINK_WPM_VERBOSE) printf("IGNORED WAYPOINT COMMAND BECAUSE TARGET SYSTEM AND COMPONENT OR COMM PARTNER ID MISMATCH\n"); - -#endif - } - - } - break; - - case MAVLINK_MSG_ID_MISSION_ITEM: { - mavlink_mission_item_t wp; - mavlink_msg_mission_item_decode(msg, &wp); - - mavlink_missionlib_send_gcs_string("GOT WP"); -// printf("sysid=%d, current_partner_sysid=%d\n", msg->sysid, wpm->current_partner_sysid); -// printf("compid=%d, current_partner_compid=%d\n", msg->compid, wpm->current_partner_compid); - -// if((msg->sysid == wpm->current_partner_sysid && msg->compid == wpm->current_partner_compid) && (wp.target_system == mavlink_system.sysid /*&& wp.target_component == mavlink_wpm_comp_id*/)) - if (wp.target_system == mavlink_system.sysid && wp.target_component == mavlink_wpm_comp_id) { - - wpm->timestamp_lastaction = now; - -// printf("wpm->current_state=%u, wp.seq = %d, wpm->current_wp_id=%d\n", wpm->current_state, wp.seq, wpm->current_wp_id); - -// wpm->current_state = MAVLINK_WPM_STATE_GETLIST;//removeme debug XXX TODO - - //ensure that we are in the correct state and that the first waypoint has id 0 and the following waypoints have the correct ids - if ((wpm->current_state == MAVLINK_WPM_STATE_GETLIST && wp.seq == 0) || (wpm->current_state == MAVLINK_WPM_STATE_GETLIST_GETWPS && wp.seq == wpm->current_wp_id && wp.seq < wpm->current_count)) { - //mavlink_missionlib_send_gcs_string("DEBUG 2"); - -// if (verbose && wpm->current_state == MAVLINK_WPM_STATE_GETLIST) // printf("Got MAVLINK_MSG_ID_MISSION_ITEM %u from %u changing state to MAVLINK_WPM_STATE_GETLIST_GETWPS\n", wp.seq, msg->sysid); -// if (verbose && wpm->current_state == MAVLINK_WPM_STATE_GETLIST_GETWPS && wp.seq == wpm->current_wp_id) // printf("Got MAVLINK_MSG_ID_MISSION_ITEM %u from %u\n", wp.seq, msg->sysid); -// if (verbose && wpm->current_state == MAVLINK_WPM_STATE_GETLIST_GETWPS && wp.seq-1 == wpm->current_wp_id) // printf("Got MAVLINK_MSG_ID_MISSION_ITEM %u (again) from %u\n", wp.seq, msg->sysid); -// - wpm->current_state = MAVLINK_WPM_STATE_GETLIST_GETWPS; - mavlink_mission_item_t *newwp = &(wpm->rcv_waypoints[wp.seq]); - memcpy(newwp, &wp, sizeof(mavlink_mission_item_t)); -// printf("WP seq: %d\n",wp.seq); - wpm->current_wp_id = wp.seq + 1; - - // if (verbose) // printf ("Added new waypoint to list. X= %f\t Y= %f\t Z= %f\t Yaw= %f\n", newwp->x, newwp->y, newwp->z, newwp->param4); -// printf ("Added new waypoint to list. X= %f\t Y= %f\t Z= %f\t Yaw= %f\n", newwp->x, newwp->y, newwp->z, newwp->param4); - -// printf ("wpm->current_wp_id =%d, wpm->current_count=%d\n\n", wpm->current_wp_id, wpm->current_count); - if (wpm->current_wp_id == wpm->current_count && wpm->current_state == MAVLINK_WPM_STATE_GETLIST_GETWPS) { - mavlink_missionlib_send_gcs_string("GOT ALL WPS"); - // if (verbose) // printf("Got all %u waypoints, changing state to MAVLINK_WPM_STATE_IDLE\n", wpm->current_count); - - mavlink_wpm_send_waypoint_ack(wpm->current_partner_sysid, wpm->current_partner_compid, 0); - - if (wpm->current_active_wp_id > wpm->rcv_size - 1) { - wpm->current_active_wp_id = wpm->rcv_size - 1; - } - - // switch the waypoints list - // FIXME CHECK!!! - uint32_t i; - - for (i = 0; i < wpm->current_count; ++i) { - wpm->waypoints[i] = wpm->rcv_waypoints[i]; - } - - wpm->size = wpm->current_count; - - //get the new current waypoint - - for (i = 0; i < wpm->size; i++) { - if (wpm->waypoints[i].current == 1) { - wpm->current_active_wp_id = i; - //// if (verbose) // printf("New current waypoint %u\n", current_active_wp_id); - wpm->yaw_reached = false; - wpm->pos_reached = false; - mavlink_wpm_send_waypoint_current(wpm->current_active_wp_id); - mavlink_wpm_send_setpoint(wpm->current_active_wp_id); - wpm->timestamp_firstinside_orbit = 0; - break; - } - } - - if (i == wpm->size) { - wpm->current_active_wp_id = -1; - wpm->yaw_reached = false; - wpm->pos_reached = false; - wpm->timestamp_firstinside_orbit = 0; - } - - wpm->current_state = MAVLINK_WPM_STATE_IDLE; - - } else { - mavlink_wpm_send_waypoint_request(wpm->current_partner_sysid, wpm->current_partner_compid, wpm->current_wp_id); - } - - } else { - if (wpm->current_state == MAVLINK_WPM_STATE_IDLE) { - //we're done receiving waypoints, answer with ack. - mavlink_wpm_send_waypoint_ack(wpm->current_partner_sysid, wpm->current_partner_compid, 0); - printf("Received MAVLINK_MSG_ID_MISSION_ITEM while state=MAVLINK_WPM_STATE_IDLE, answered with WAYPOINT_ACK.\n"); - } - - // if (verbose) - { - if (!(wpm->current_state == MAVLINK_WPM_STATE_GETLIST || wpm->current_state == MAVLINK_WPM_STATE_GETLIST_GETWPS)) { -// printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM %u because i'm doing something else already (state=%i).\n", wp.seq, wpm->current_state); - break; - - } else if (wpm->current_state == MAVLINK_WPM_STATE_GETLIST) { - if (!(wp.seq == 0)) { -// printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM because the first waypoint ID (%u) was not 0.\n", wp.seq); - } else { -// printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM %u - FIXME: missed error description\n", wp.seq); - } - } else if (wpm->current_state == MAVLINK_WPM_STATE_GETLIST_GETWPS) { - if (!(wp.seq == wpm->current_wp_id)) { -// printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM because the waypoint ID (%u) was not the expected %u.\n", wp.seq, wpm->current_wp_id); - mavlink_wpm_send_waypoint_request(wpm->current_partner_sysid, wpm->current_partner_compid, wpm->current_wp_id); - - } else if (!(wp.seq < wpm->current_count)) { -// printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM because the waypoint ID (%u) was out of bounds.\n", wp.seq); - } else { -// printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM %u - FIXME: missed error description\n", wp.seq); - } - } else { -// printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM %u - FIXME: missed error description\n", wp.seq); - } - } - } - } else { - //we we're target but already communicating with someone else - if ((wp.target_system == mavlink_system.sysid /*&& wp.target_component == mavlink_wpm_comp_id*/) && !(msg->sysid == wpm->current_partner_sysid && msg->compid == wpm->current_partner_compid) && wpm->current_state != MAVLINK_WPM_STATE_IDLE) { - // if (verbose) // printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM %u from ID %u because i'm already talking to ID %u.\n", wp.seq, msg->sysid, wpm->current_partner_sysid); - } else if (wp.target_system == mavlink_system.sysid /* && wp.target_component == mavlink_wpm_comp_id*/) { - // if (verbose) // printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM %u from ID %u because i have no idea what to do with it\n", wp.seq, msg->sysid); - } - } - - break; - } - - case MAVLINK_MSG_ID_MISSION_CLEAR_ALL: { - mavlink_mission_clear_all_t wpca; - mavlink_msg_mission_clear_all_decode(msg, &wpca); - - if (wpca.target_system == mavlink_system.sysid /*&& wpca.target_component == mavlink_wpm_comp_id */ && wpm->current_state == MAVLINK_WPM_STATE_IDLE) { - wpm->timestamp_lastaction = now; - - // if (verbose) // printf("Got MAVLINK_MSG_ID_MISSION_ITEM_CLEAR_LIST from %u deleting all waypoints\n", msg->sysid); - // Delete all waypoints - wpm->size = 0; - wpm->current_active_wp_id = -1; - wpm->yaw_reached = false; - wpm->pos_reached = false; - - } else if (wpca.target_system == mavlink_system.sysid /*&& wpca.target_component == mavlink_wpm_comp_id */ && wpm->current_state != MAVLINK_WPM_STATE_IDLE) { - // if (verbose) // printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_CLEAR_LIST from %u because i'm doing something else already (state=%i).\n", msg->sysid, wpm->current_state); - } - - break; - } - - default: { - // if (debug) // printf("Waypoint: received message of unknown type"); - break; - } - } - - check_waypoints_reached(now, global_pos, local_pos); -} |