diff options
Diffstat (limited to 'apps/multirotor_att_control')
-rwxr-xr-x | apps/multirotor_att_control/Makefile | 42 | ||||
-rw-r--r-- | apps/multirotor_att_control/multirotor_att_control_main.c | 485 | ||||
-rw-r--r-- | apps/multirotor_att_control/multirotor_attitude_control.c | 249 | ||||
-rw-r--r-- | apps/multirotor_att_control/multirotor_attitude_control.h | 57 | ||||
-rw-r--r-- | apps/multirotor_att_control/multirotor_rate_control.c | 230 | ||||
-rw-r--r-- | apps/multirotor_att_control/multirotor_rate_control.h | 56 |
6 files changed, 0 insertions, 1119 deletions
diff --git a/apps/multirotor_att_control/Makefile b/apps/multirotor_att_control/Makefile deleted file mode 100755 index 03cf33e43..000000000 --- a/apps/multirotor_att_control/Makefile +++ /dev/null @@ -1,42 +0,0 @@ -############################################################################ -# -# Copyright (C) 2012 PX4 Development Team. All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name PX4 nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -# -# Makefile to build uORB -# - -APPNAME = multirotor_att_control -PRIORITY = SCHED_PRIORITY_MAX - 15 -STACKSIZE = 2048 - -include $(APPDIR)/mk/app.mk diff --git a/apps/multirotor_att_control/multirotor_att_control_main.c b/apps/multirotor_att_control/multirotor_att_control_main.c deleted file mode 100644 index d94c0a69c..000000000 --- a/apps/multirotor_att_control/multirotor_att_control_main.c +++ /dev/null @@ -1,485 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * Author: Lorenz Meier <lm@inf.ethz.ch> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/** - * @file multirotor_att_control_main.c - * - * Implementation of multirotor attitude control main loop. - * - * @author Lorenz Meier <lm@inf.ethz.ch> - */ - -#include <nuttx/config.h> -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <stdbool.h> -#include <unistd.h> -#include <fcntl.h> -#include <errno.h> -#include <debug.h> -#include <getopt.h> -#include <time.h> -#include <math.h> -#include <poll.h> -#include <sys/prctl.h> -#include <drivers/drv_hrt.h> -#include <uORB/uORB.h> -#include <drivers/drv_gyro.h> -#include <uORB/topics/vehicle_status.h> -#include <uORB/topics/vehicle_attitude.h> -#include <uORB/topics/vehicle_attitude_setpoint.h> -#include <uORB/topics/manual_control_setpoint.h> -#include <uORB/topics/offboard_control_setpoint.h> -#include <uORB/topics/vehicle_rates_setpoint.h> -#include <uORB/topics/sensor_combined.h> -#include <uORB/topics/actuator_controls.h> -#include <uORB/topics/parameter_update.h> - -#include <systemlib/perf_counter.h> -#include <systemlib/systemlib.h> -#include <systemlib/param/param.h> - -#include "multirotor_attitude_control.h" -#include "multirotor_rate_control.h" - -PARAM_DEFINE_FLOAT(MC_RCLOSS_THR, 0.0f); // This defines the throttle when the RC signal is lost. - -__EXPORT int multirotor_att_control_main(int argc, char *argv[]); - -static bool thread_should_exit; -static int mc_task; -static bool motor_test_mode = false; - -static orb_advert_t actuator_pub; - -static struct vehicle_status_s state; - -static int -mc_thread_main(int argc, char *argv[]) -{ - /* declare and safely initialize all structs */ - memset(&state, 0, sizeof(state)); - struct vehicle_attitude_s att; - memset(&att, 0, sizeof(att)); - struct vehicle_attitude_setpoint_s att_sp; - memset(&att_sp, 0, sizeof(att_sp)); - struct manual_control_setpoint_s manual; - memset(&manual, 0, sizeof(manual)); - struct sensor_combined_s raw; - memset(&raw, 0, sizeof(raw)); - struct offboard_control_setpoint_s offboard_sp; - memset(&offboard_sp, 0, sizeof(offboard_sp)); - struct vehicle_rates_setpoint_s rates_sp; - memset(&rates_sp, 0, sizeof(rates_sp)); - - struct actuator_controls_s actuators; - memset(&actuators, 0, sizeof(actuators)); - - /* subscribe to attitude, motor setpoints and system state */ - int att_sub = orb_subscribe(ORB_ID(vehicle_attitude)); - int param_sub = orb_subscribe(ORB_ID(parameter_update)); - int att_setpoint_sub = orb_subscribe(ORB_ID(vehicle_attitude_setpoint)); - int setpoint_sub = orb_subscribe(ORB_ID(offboard_control_setpoint)); - int state_sub = orb_subscribe(ORB_ID(vehicle_status)); - int manual_sub = orb_subscribe(ORB_ID(manual_control_setpoint)); - int sensor_sub = orb_subscribe(ORB_ID(sensor_combined)); - - /* - * Do not rate-limit the loop to prevent aliasing - * if rate-limiting would be desired later, the line below would - * enable it. - * - * rate-limit the attitude subscription to 200Hz to pace our loop - * orb_set_interval(att_sub, 5); - */ - struct pollfd fds[2] = { - { .fd = att_sub, .events = POLLIN }, - { .fd = param_sub, .events = POLLIN } - }; - - /* publish actuator controls */ - for (unsigned i = 0; i < NUM_ACTUATOR_CONTROLS; i++) { - actuators.control[i] = 0.0f; - } - - actuator_pub = orb_advertise(ORB_ID_VEHICLE_ATTITUDE_CONTROLS, &actuators); - orb_advert_t att_sp_pub = orb_advertise(ORB_ID(vehicle_attitude_setpoint), &att_sp); - orb_advert_t rates_sp_pub = orb_advertise(ORB_ID(vehicle_rates_setpoint), &rates_sp); - int rates_sp_sub = orb_subscribe(ORB_ID(vehicle_rates_setpoint)); - - /* register the perf counter */ - perf_counter_t mc_loop_perf = perf_alloc(PC_ELAPSED, "multirotor_att_control_runtime"); - perf_counter_t mc_interval_perf = perf_alloc(PC_INTERVAL, "multirotor_att_control_interval"); - perf_counter_t mc_err_perf = perf_alloc(PC_COUNT, "multirotor_att_control_err"); - - /* welcome user */ - printf("[multirotor_att_control] starting\n"); - - /* store last control mode to detect mode switches */ - bool flag_control_manual_enabled = false; - bool flag_control_attitude_enabled = false; - bool flag_system_armed = false; - - /* store if yaw position or yaw speed has been changed */ - bool control_yaw_position = true; - - /* store if we stopped a yaw movement */ - bool first_time_after_yaw_speed_control = true; - - /* prepare the handle for the failsafe throttle */ - param_t failsafe_throttle_handle = param_find("MC_RCLOSS_THR"); - float failsafe_throttle = 0.0f; - - - while (!thread_should_exit) { - - /* wait for a sensor update, check for exit condition every 500 ms */ - int ret = poll(fds, 2, 500); - - if (ret < 0) { - /* poll error, count it in perf */ - perf_count(mc_err_perf); - - } else if (ret == 0) { - /* no return value, ignore */ - } else { - - /* only update parameters if they changed */ - if (fds[1].revents & POLLIN) { - /* read from param to clear updated flag */ - struct parameter_update_s update; - orb_copy(ORB_ID(parameter_update), param_sub, &update); - - /* update parameters */ - // XXX no params here yet - } - - /* only run controller if attitude changed */ - if (fds[0].revents & POLLIN) { - - perf_begin(mc_loop_perf); - - /* get a local copy of system state */ - bool updated; - orb_check(state_sub, &updated); - - if (updated) { - orb_copy(ORB_ID(vehicle_status), state_sub, &state); - } - - /* get a local copy of manual setpoint */ - orb_copy(ORB_ID(manual_control_setpoint), manual_sub, &manual); - /* get a local copy of attitude */ - orb_copy(ORB_ID(vehicle_attitude), att_sub, &att); - /* get a local copy of attitude setpoint */ - orb_copy(ORB_ID(vehicle_attitude_setpoint), att_setpoint_sub, &att_sp); - /* get a local copy of rates setpoint */ - orb_check(setpoint_sub, &updated); - - if (updated) { - orb_copy(ORB_ID(offboard_control_setpoint), setpoint_sub, &offboard_sp); - } - - /* get a local copy of the current sensor values */ - orb_copy(ORB_ID(sensor_combined), sensor_sub, &raw); - - - /** STEP 1: Define which input is the dominating control input */ - if (state.flag_control_offboard_enabled) { - /* offboard inputs */ - if (offboard_sp.mode == OFFBOARD_CONTROL_MODE_DIRECT_RATES) { - rates_sp.roll = offboard_sp.p1; - rates_sp.pitch = offboard_sp.p2; - rates_sp.yaw = offboard_sp.p3; - rates_sp.thrust = offboard_sp.p4; -// printf("thrust_rate=%8.4f\n",offboard_sp.p4); - rates_sp.timestamp = hrt_absolute_time(); - orb_publish(ORB_ID(vehicle_rates_setpoint), rates_sp_pub, &rates_sp); - - } else if (offboard_sp.mode == OFFBOARD_CONTROL_MODE_DIRECT_ATTITUDE) { - att_sp.roll_body = offboard_sp.p1; - att_sp.pitch_body = offboard_sp.p2; - att_sp.yaw_body = offboard_sp.p3; - att_sp.thrust = offboard_sp.p4; -// printf("thrust_att=%8.4f\n",offboard_sp.p4); - att_sp.timestamp = hrt_absolute_time(); - /* STEP 2: publish the result to the vehicle actuators */ - orb_publish(ORB_ID(vehicle_attitude_setpoint), att_sp_pub, &att_sp); - } - - - } else if (state.flag_control_manual_enabled) { - - if (state.flag_control_attitude_enabled) { - - /* initialize to current yaw if switching to manual or att control */ - if (state.flag_control_attitude_enabled != flag_control_attitude_enabled || - state.flag_control_manual_enabled != flag_control_manual_enabled || - state.flag_system_armed != flag_system_armed) { - att_sp.yaw_body = att.yaw; - } - - static bool rc_loss_first_time = true; - - /* if the RC signal is lost, try to stay level and go slowly back down to ground */ - if (state.rc_signal_lost) { - /* the failsafe throttle is stored as a parameter, as it depends on the copter and the payload */ - param_get(failsafe_throttle_handle, &failsafe_throttle); - att_sp.roll_body = 0.0f; - att_sp.pitch_body = 0.0f; - - /* - * Only go to failsafe throttle if last known throttle was - * high enough to create some lift to make hovering state likely. - * - * This is to prevent that someone landing, but not disarming his - * multicopter (throttle = 0) does not make it jump up in the air - * if shutting down his remote. - */ - if (isfinite(manual.throttle) && manual.throttle > 0.2f) { - att_sp.thrust = failsafe_throttle; - - } else { - att_sp.thrust = 0.0f; - } - - /* keep current yaw, do not attempt to go to north orientation, - * since if the pilot regains RC control, he will be lost regarding - * the current orientation. - */ - if (rc_loss_first_time) - att_sp.yaw_body = att.yaw; - - rc_loss_first_time = false; - - } else { - rc_loss_first_time = true; - - att_sp.roll_body = manual.roll; - att_sp.pitch_body = manual.pitch; - - /* set attitude if arming */ - if (!flag_control_attitude_enabled && state.flag_system_armed) { - att_sp.yaw_body = att.yaw; - } - - /* act if stabilization is active or if the (nonsense) direct pass through mode is set */ - if (state.manual_control_mode == VEHICLE_MANUAL_CONTROL_MODE_SAS || - state.manual_control_mode == VEHICLE_MANUAL_CONTROL_MODE_DIRECT) { - - if (state.manual_sas_mode == VEHICLE_MANUAL_SAS_MODE_ROLL_PITCH_ABS_YAW_RATE) { - rates_sp.yaw = manual.yaw; - control_yaw_position = false; - - } else { - /* - * This mode SHOULD be the default mode, which is: - * VEHICLE_MANUAL_SAS_MODE_ROLL_PITCH_ABS_YAW_ABS - * - * However, we fall back to this setting for all other (nonsense) - * settings as well. - */ - - /* only move setpoint if manual input is != 0 */ - if ((manual.yaw < -0.01f || 0.01f < manual.yaw) && manual.throttle > 0.3f) { - rates_sp.yaw = manual.yaw; - control_yaw_position = false; - first_time_after_yaw_speed_control = true; - - } else { - if (first_time_after_yaw_speed_control) { - att_sp.yaw_body = att.yaw; - first_time_after_yaw_speed_control = false; - } - - control_yaw_position = true; - } - } - } - - att_sp.thrust = manual.throttle; - att_sp.timestamp = hrt_absolute_time(); - } - - /* STEP 2: publish the controller output */ - orb_publish(ORB_ID(vehicle_attitude_setpoint), att_sp_pub, &att_sp); - - if (motor_test_mode) { - printf("testmode"); - att_sp.roll_body = 0.0f; - att_sp.pitch_body = 0.0f; - att_sp.yaw_body = 0.0f; - att_sp.thrust = 0.1f; - att_sp.timestamp = hrt_absolute_time(); - /* STEP 2: publish the result to the vehicle actuators */ - orb_publish(ORB_ID(vehicle_attitude_setpoint), att_sp_pub, &att_sp); - } - - } else { - /* manual rate inputs, from RC control or joystick */ - if (state.flag_control_rates_enabled && - state.manual_control_mode == VEHICLE_MANUAL_CONTROL_MODE_RATES) { - rates_sp.roll = manual.roll; - - rates_sp.pitch = manual.pitch; - rates_sp.yaw = manual.yaw; - rates_sp.thrust = manual.throttle; - rates_sp.timestamp = hrt_absolute_time(); - } - } - - } - - /** STEP 3: Identify the controller setup to run and set up the inputs correctly */ - if (state.flag_control_attitude_enabled) { - multirotor_control_attitude(&att_sp, &att, &rates_sp, control_yaw_position); - - orb_publish(ORB_ID(vehicle_rates_setpoint), rates_sp_pub, &rates_sp); - } - - /* measure in what intervals the controller runs */ - perf_count(mc_interval_perf); - - float gyro[3]; - - /* get current rate setpoint */ - bool rates_sp_valid = false; - orb_check(rates_sp_sub, &rates_sp_valid); - - if (rates_sp_valid) { - orb_copy(ORB_ID(vehicle_rates_setpoint), rates_sp_sub, &rates_sp); - } - - /* apply controller */ - gyro[0] = att.rollspeed; - gyro[1] = att.pitchspeed; - gyro[2] = att.yawspeed; - - multirotor_control_rates(&rates_sp, gyro, &actuators); - orb_publish(ORB_ID_VEHICLE_ATTITUDE_CONTROLS, actuator_pub, &actuators); - - /* update state */ - flag_control_attitude_enabled = state.flag_control_attitude_enabled; - flag_control_manual_enabled = state.flag_control_manual_enabled; - flag_system_armed = state.flag_system_armed; - - perf_end(mc_loop_perf); - } /* end of poll call for attitude updates */ - } /* end of poll return value check */ - } - - printf("[multirotor att control] stopping, disarming motors.\n"); - - /* kill all outputs */ - for (unsigned i = 0; i < NUM_ACTUATOR_CONTROLS; i++) - actuators.control[i] = 0.0f; - - orb_publish(ORB_ID_VEHICLE_ATTITUDE_CONTROLS, actuator_pub, &actuators); - - - close(att_sub); - close(state_sub); - close(manual_sub); - close(actuator_pub); - close(att_sp_pub); - - perf_print_counter(mc_loop_perf); - perf_free(mc_loop_perf); - - fflush(stdout); - exit(0); -} - -static void -usage(const char *reason) -{ - if (reason) - fprintf(stderr, "%s\n", reason); - - fprintf(stderr, "usage: multirotor_att_control [-m <mode>] [-t] {start|status|stop}\n"); - fprintf(stderr, " <mode> is 'rates' or 'attitude'\n"); - fprintf(stderr, " -t enables motor test mode with 10%% thrust\n"); - exit(1); -} - -int multirotor_att_control_main(int argc, char *argv[]) -{ - int ch; - unsigned int optioncount = 0; - - while ((ch = getopt(argc, argv, "tm:")) != EOF) { - switch (ch) { - case 't': - motor_test_mode = true; - optioncount += 1; - break; - - case ':': - usage("missing parameter"); - break; - - default: - fprintf(stderr, "option: -%c\n", ch); - usage("unrecognized option"); - break; - } - } - - argc -= optioncount; - //argv += optioncount; - - if (argc < 1) - usage("missing command"); - - if (!strcmp(argv[1 + optioncount], "start")) { - - thread_should_exit = false; - mc_task = task_spawn("multirotor_att_control", - SCHED_DEFAULT, - SCHED_PRIORITY_MAX - 15, - 2048, - mc_thread_main, - NULL); - exit(0); - } - - if (!strcmp(argv[1 + optioncount], "stop")) { - thread_should_exit = true; - exit(0); - } - - usage("unrecognized command"); - exit(1); -} diff --git a/apps/multirotor_att_control/multirotor_attitude_control.c b/apps/multirotor_att_control/multirotor_attitude_control.c deleted file mode 100644 index 76dbb36d3..000000000 --- a/apps/multirotor_att_control/multirotor_attitude_control.c +++ /dev/null @@ -1,249 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2008-2012 PX4 Development Team. All rights reserved. - * Author: @author Thomas Gubler <thomasgubler@student.ethz.ch> - * @author Julian Oes <joes@student.ethz.ch> - * @author Laurens Mackay <mackayl@student.ethz.ch> - * @author Tobias Naegeli <naegelit@student.ethz.ch> - * @author Martin Rutschmann <rutmarti@student.ethz.ch> - * @author Lorenz Meier <lm@inf.ethz.ch> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* - * @file multirotor_attitude_control.c - * Implementation of attitude controller - */ - -#include "multirotor_attitude_control.h" -#include <stdio.h> -#include <stdlib.h> -#include <stdio.h> -#include <stdint.h> -#include <stdbool.h> -#include <float.h> -#include <math.h> -#include <systemlib/pid/pid.h> -#include <systemlib/param/param.h> -#include <drivers/drv_hrt.h> - -PARAM_DEFINE_FLOAT(MC_YAWPOS_P, 0.3f); -PARAM_DEFINE_FLOAT(MC_YAWPOS_I, 0.15f); -PARAM_DEFINE_FLOAT(MC_YAWPOS_D, 0.0f); -//PARAM_DEFINE_FLOAT(MC_YAWPOS_AWU, 1.0f); -//PARAM_DEFINE_FLOAT(MC_YAWPOS_LIM, 3.0f); - -PARAM_DEFINE_FLOAT(MC_ATT_P, 0.2f); -PARAM_DEFINE_FLOAT(MC_ATT_I, 0.0f); -PARAM_DEFINE_FLOAT(MC_ATT_D, 0.05f); -//PARAM_DEFINE_FLOAT(MC_ATT_AWU, 0.05f); -//PARAM_DEFINE_FLOAT(MC_ATT_LIM, 0.4f); - -//PARAM_DEFINE_FLOAT(MC_ATT_XOFF, 0.0f); -//PARAM_DEFINE_FLOAT(MC_ATT_YOFF, 0.0f); - -struct mc_att_control_params { - float yaw_p; - float yaw_i; - float yaw_d; - //float yaw_awu; - //float yaw_lim; - - float att_p; - float att_i; - float att_d; - //float att_awu; - //float att_lim; - - //float att_xoff; - //float att_yoff; -}; - -struct mc_att_control_param_handles { - param_t yaw_p; - param_t yaw_i; - param_t yaw_d; - //param_t yaw_awu; - //param_t yaw_lim; - - param_t att_p; - param_t att_i; - param_t att_d; - //param_t att_awu; - //param_t att_lim; - - //param_t att_xoff; - //param_t att_yoff; -}; - -/** - * Initialize all parameter handles and values - * - */ -static int parameters_init(struct mc_att_control_param_handles *h); - -/** - * Update all parameters - * - */ -static int parameters_update(const struct mc_att_control_param_handles *h, struct mc_att_control_params *p); - - -static int parameters_init(struct mc_att_control_param_handles *h) -{ - /* PID parameters */ - h->yaw_p = param_find("MC_YAWPOS_P"); - h->yaw_i = param_find("MC_YAWPOS_I"); - h->yaw_d = param_find("MC_YAWPOS_D"); - //h->yaw_awu = param_find("MC_YAWPOS_AWU"); - //h->yaw_lim = param_find("MC_YAWPOS_LIM"); - - h->att_p = param_find("MC_ATT_P"); - h->att_i = param_find("MC_ATT_I"); - h->att_d = param_find("MC_ATT_D"); - //h->att_awu = param_find("MC_ATT_AWU"); - //h->att_lim = param_find("MC_ATT_LIM"); - - //h->att_xoff = param_find("MC_ATT_XOFF"); - //h->att_yoff = param_find("MC_ATT_YOFF"); - - return OK; -} - -static int parameters_update(const struct mc_att_control_param_handles *h, struct mc_att_control_params *p) -{ - param_get(h->yaw_p, &(p->yaw_p)); - param_get(h->yaw_i, &(p->yaw_i)); - param_get(h->yaw_d, &(p->yaw_d)); - //param_get(h->yaw_awu, &(p->yaw_awu)); - //param_get(h->yaw_lim, &(p->yaw_lim)); - - param_get(h->att_p, &(p->att_p)); - param_get(h->att_i, &(p->att_i)); - param_get(h->att_d, &(p->att_d)); - //param_get(h->att_awu, &(p->att_awu)); - //param_get(h->att_lim, &(p->att_lim)); - - //param_get(h->att_xoff, &(p->att_xoff)); - //param_get(h->att_yoff, &(p->att_yoff)); - - return OK; -} - -void multirotor_control_attitude(const struct vehicle_attitude_setpoint_s *att_sp, - const struct vehicle_attitude_s *att, struct vehicle_rates_setpoint_s *rates_sp, bool control_yaw_position) -{ - static uint64_t last_run = 0; - static uint64_t last_input = 0; - float deltaT = (hrt_absolute_time() - last_run) / 1000000.0f; - float dT_input = (hrt_absolute_time() - last_input) / 1000000.0f; - last_run = hrt_absolute_time(); - - if (last_input != att_sp->timestamp) { - last_input = att_sp->timestamp; - } - - static int sensor_delay; - sensor_delay = hrt_absolute_time() - att->timestamp; - - static int motor_skip_counter = 0; - - static PID_t pitch_controller; - static PID_t roll_controller; - - static struct mc_att_control_params p; - static struct mc_att_control_param_handles h; - - static bool initialized = false; - - static float yaw_error; - - /* initialize the pid controllers when the function is called for the first time */ - if (initialized == false) { - parameters_init(&h); - parameters_update(&h, &p); - - pid_init(&pitch_controller, p.att_p, p.att_i, p.att_d, 1000.0f, - 1000.0f, PID_MODE_DERIVATIV_SET); - pid_init(&roll_controller, p.att_p, p.att_i, p.att_d, 1000.0f, - 1000.0f, PID_MODE_DERIVATIV_SET); - - initialized = true; - } - - /* load new parameters with lower rate */ - if (motor_skip_counter % 500 == 0) { - /* update parameters from storage */ - parameters_update(&h, &p); - - /* apply parameters */ - pid_set_parameters(&pitch_controller, p.att_p, p.att_i, p.att_d, 1000.0f, 1000.0f); - pid_set_parameters(&roll_controller, p.att_p, p.att_i, p.att_d, 1000.0f, 1000.0f); - } - - /* reset integral if on ground */ - if (att_sp->thrust < 0.1f) { - pid_reset_integral(&pitch_controller); - pid_reset_integral(&roll_controller); - } - - - /* calculate current control outputs */ - - /* control pitch (forward) output */ - rates_sp->pitch = pid_calculate(&pitch_controller, att_sp->pitch_body , - att->pitch, att->pitchspeed, deltaT); - - /* control roll (left/right) output */ - rates_sp->roll = pid_calculate(&roll_controller, att_sp->roll_body , - att->roll, att->rollspeed, deltaT); - - if (control_yaw_position) { - /* control yaw rate */ - - /* positive error: rotate to right, negative error, rotate to left (NED frame) */ - // yaw_error = _wrap_pi(att_sp->yaw_body - att->yaw); - - yaw_error = att_sp->yaw_body - att->yaw; - - if (yaw_error > M_PI_F) { - yaw_error -= M_TWOPI_F; - - } else if (yaw_error < -M_PI_F) { - yaw_error += M_TWOPI_F; - } - - rates_sp->yaw = p.yaw_p * (yaw_error) - (p.yaw_d * att->yawspeed); - } - - rates_sp->thrust = att_sp->thrust; - - motor_skip_counter++; -} diff --git a/apps/multirotor_att_control/multirotor_attitude_control.h b/apps/multirotor_att_control/multirotor_attitude_control.h deleted file mode 100644 index 2cf83e443..000000000 --- a/apps/multirotor_att_control/multirotor_attitude_control.h +++ /dev/null @@ -1,57 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * Author: @author Thomas Gubler <thomasgubler@student.ethz.ch> - * @author Julian Oes <joes@student.ethz.ch> - * @author Laurens Mackay <mackayl@student.ethz.ch> - * @author Tobias Naegeli <naegelit@student.ethz.ch> - * @author Martin Rutschmann <rutmarti@student.ethz.ch> - * @author Lorenz Meier <lm@inf.ethz.ch> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* - * @file multirotor_attitude_control.h - * Attitude control for multi rotors. - */ - -#ifndef MULTIROTOR_ATTITUDE_CONTROL_H_ -#define MULTIROTOR_ATTITUDE_CONTROL_H_ - -#include <uORB/uORB.h> -#include <uORB/topics/vehicle_attitude.h> -#include <uORB/topics/vehicle_attitude_setpoint.h> -#include <uORB/topics/vehicle_rates_setpoint.h> -#include <uORB/topics/actuator_controls.h> - -void multirotor_control_attitude(const struct vehicle_attitude_setpoint_s *att_sp, - const struct vehicle_attitude_s *att, struct vehicle_rates_setpoint_s *rates_sp, bool control_yaw_position); - -#endif /* MULTIROTOR_ATTITUDE_CONTROL_H_ */ diff --git a/apps/multirotor_att_control/multirotor_rate_control.c b/apps/multirotor_att_control/multirotor_rate_control.c deleted file mode 100644 index deba1ac03..000000000 --- a/apps/multirotor_att_control/multirotor_rate_control.c +++ /dev/null @@ -1,230 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * Author: Tobias Naegeli <naegelit@student.ethz.ch> - * Lorenz Meier <lm@inf.ethz.ch> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/** - * @file multirotor_rate_control.c - * - * Implementation of rate controller - * - * @author Tobias Naegeli <naegelit@student.ethz.ch> - * @author Lorenz Meier <lm@inf.ethz.ch> - */ - -#include "multirotor_rate_control.h" -#include <stdio.h> -#include <stdlib.h> -#include <stdio.h> -#include <stdint.h> -#include <stdbool.h> -#include <float.h> -#include <math.h> -#include <systemlib/pid/pid.h> -#include <systemlib/param/param.h> -#include <systemlib/err.h> -#include <drivers/drv_hrt.h> - -PARAM_DEFINE_FLOAT(MC_YAWRATE_P, 0.0f); /* same on Flamewheel */ -PARAM_DEFINE_FLOAT(MC_YAWRATE_D, 0.0f); -PARAM_DEFINE_FLOAT(MC_YAWRATE_I, 0.0f); -//PARAM_DEFINE_FLOAT(MC_YAWRATE_AWU, 0.0f); -//PARAM_DEFINE_FLOAT(MC_YAWRATE_LIM, 1.0f); - -PARAM_DEFINE_FLOAT(MC_ATTRATE_P, 0.0f); /* 0.15 F405 Flamewheel */ -PARAM_DEFINE_FLOAT(MC_ATTRATE_D, 0.0f); -PARAM_DEFINE_FLOAT(MC_ATTRATE_I, 0.0f); -//PARAM_DEFINE_FLOAT(MC_ATTRATE_AWU, 0.05f); -//PARAM_DEFINE_FLOAT(MC_ATTRATE_LIM, 1.0f); /**< roughly < 500 deg/s limit */ - -struct mc_rate_control_params { - - float yawrate_p; - float yawrate_d; - float yawrate_i; - //float yawrate_awu; - //float yawrate_lim; - - float attrate_p; - float attrate_d; - float attrate_i; - //float attrate_awu; - //float attrate_lim; - - float rate_lim; -}; - -struct mc_rate_control_param_handles { - - param_t yawrate_p; - param_t yawrate_i; - param_t yawrate_d; - //param_t yawrate_awu; - //param_t yawrate_lim; - - param_t attrate_p; - param_t attrate_i; - param_t attrate_d; - //param_t attrate_awu; - //param_t attrate_lim; -}; - -/** - * Initialize all parameter handles and values - * - */ -static int parameters_init(struct mc_rate_control_param_handles *h); - -/** - * Update all parameters - * - */ -static int parameters_update(const struct mc_rate_control_param_handles *h, struct mc_rate_control_params *p); - - -static int parameters_init(struct mc_rate_control_param_handles *h) -{ - /* PID parameters */ - h->yawrate_p = param_find("MC_YAWRATE_P"); - h->yawrate_i = param_find("MC_YAWRATE_I"); - h->yawrate_d = param_find("MC_YAWRATE_D"); - //h->yawrate_awu = param_find("MC_YAWRATE_AWU"); - //h->yawrate_lim = param_find("MC_YAWRATE_LIM"); - - h->attrate_p = param_find("MC_ATTRATE_P"); - h->attrate_i = param_find("MC_ATTRATE_I"); - h->attrate_d = param_find("MC_ATTRATE_D"); - //h->attrate_awu = param_find("MC_ATTRATE_AWU"); - //h->attrate_lim = param_find("MC_ATTRATE_LIM"); - - return OK; -} - -static int parameters_update(const struct mc_rate_control_param_handles *h, struct mc_rate_control_params *p) -{ - param_get(h->yawrate_p, &(p->yawrate_p)); - param_get(h->yawrate_i, &(p->yawrate_i)); - param_get(h->yawrate_d, &(p->yawrate_d)); - //param_get(h->yawrate_awu, &(p->yawrate_awu)); - //param_get(h->yawrate_lim, &(p->yawrate_lim)); - - param_get(h->attrate_p, &(p->attrate_p)); - param_get(h->attrate_i, &(p->attrate_i)); - param_get(h->attrate_d, &(p->attrate_d)); - //param_get(h->attrate_awu, &(p->attrate_awu)); - //param_get(h->attrate_lim, &(p->attrate_lim)); - - return OK; -} - -void multirotor_control_rates(const struct vehicle_rates_setpoint_s *rate_sp, - const float rates[], struct actuator_controls_s *actuators) -{ - static float roll_control_last = 0; - static float pitch_control_last = 0; - static uint64_t last_run = 0; - const float deltaT = (hrt_absolute_time() - last_run) / 1000000.0f; - static uint64_t last_input = 0; - - float dT_input = (hrt_absolute_time() - last_input) / 1000000.0f; - - if (last_input != rate_sp->timestamp) { - last_input = rate_sp->timestamp; - } - - last_run = hrt_absolute_time(); - - static int motor_skip_counter = 0; - - static struct mc_rate_control_params p; - static struct mc_rate_control_param_handles h; - - static bool initialized = false; - - /* initialize the pid controllers when the function is called for the first time */ - if (initialized == false) { - parameters_init(&h); - parameters_update(&h, &p); - initialized = true; - } - - /* load new parameters with lower rate */ - if (motor_skip_counter % 2500 == 0) { - /* update parameters from storage */ - parameters_update(&h, &p); - // warnx("rate ctrl: p.yawrate_p: %8.4f, loop: %d Hz, input: %d Hz", - // (double)p.yawrate_p, (int)(1.0f/deltaT), (int)(1.0f/dT_input)); - } - - /* calculate current control outputs */ - - /* control pitch (forward) output */ - float pitch_control = p.attrate_p * (rate_sp->pitch - rates[1]) - (p.attrate_d * pitch_control_last); - - /* increase resilience to faulty control inputs */ - if (isfinite(pitch_control)) { - pitch_control_last = pitch_control; - - } else { - pitch_control = 0.0f; - warnx("rej. NaN ctrl pitch"); - } - - /* control roll (left/right) output */ - float roll_control = p.attrate_p * (rate_sp->roll - rates[0]) - (p.attrate_d * roll_control_last); - - /* increase resilience to faulty control inputs */ - if (isfinite(roll_control)) { - roll_control_last = roll_control; - - } else { - roll_control = 0.0f; - warnx("rej. NaN ctrl roll"); - } - - /* control yaw rate */ - float yaw_rate_control = p.yawrate_p * (rate_sp->yaw - rates[2]); - - /* increase resilience to faulty control inputs */ - if (!isfinite(yaw_rate_control)) { - yaw_rate_control = 0.0f; - warnx("rej. NaN ctrl yaw"); - } - - actuators->control[0] = roll_control; - actuators->control[1] = pitch_control; - actuators->control[2] = yaw_rate_control; - actuators->control[3] = rate_sp->thrust; - - motor_skip_counter++; -} diff --git a/apps/multirotor_att_control/multirotor_rate_control.h b/apps/multirotor_att_control/multirotor_rate_control.h deleted file mode 100644 index 03dec317a..000000000 --- a/apps/multirotor_att_control/multirotor_rate_control.h +++ /dev/null @@ -1,56 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * Author: @author Thomas Gubler <thomasgubler@student.ethz.ch> - * @author Julian Oes <joes@student.ethz.ch> - * @author Laurens Mackay <mackayl@student.ethz.ch> - * @author Tobias Naegeli <naegelit@student.ethz.ch> - * @author Martin Rutschmann <rutmarti@student.ethz.ch> - * @author Lorenz Meier <lm@inf.ethz.ch> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* - * @file multirotor_attitude_control.h - * Attitude control for multi rotors. - */ - -#ifndef MULTIROTOR_RATE_CONTROL_H_ -#define MULTIROTOR_RATE_CONTROL_H_ - -#include <uORB/uORB.h> -#include <uORB/topics/vehicle_attitude.h> -#include <uORB/topics/vehicle_rates_setpoint.h> -#include <uORB/topics/actuator_controls.h> - -void multirotor_control_rates(const struct vehicle_rates_setpoint_s *rate_sp, - const float rates[], struct actuator_controls_s *actuators); - -#endif /* MULTIROTOR_RATE_CONTROL_H_ */ |