diff options
Diffstat (limited to 'apps/systemcmds/calibration/range_cal.c')
-rwxr-xr-x | apps/systemcmds/calibration/range_cal.c | 224 |
1 files changed, 0 insertions, 224 deletions
diff --git a/apps/systemcmds/calibration/range_cal.c b/apps/systemcmds/calibration/range_cal.c deleted file mode 100755 index 159a0d06b..000000000 --- a/apps/systemcmds/calibration/range_cal.c +++ /dev/null @@ -1,224 +0,0 @@ -/**************************************************************************** - * range_cal.c - * - * Copyright (C) 2012 Nils Wenzler. All rights reserved. - * Authors: Nils Wenzler <wenzlern@ethz.ch> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/**************************************************************************** - * Included Files - ****************************************************************************/ -#include <stdio.h> -#include <stdlib.h> -#include "calibration.h" - -/**************************************************************************** - * Defines - ****************************************************************************/ - -/**************************************************************************** - * Private Data - ****************************************************************************/ -//Store the values here before writing them to global_data_rc_channels -uint16_t max_values[NR_CHANNELS]; -uint16_t min_values[NR_CHANNELS]; -uint16_t mid_values[NR_CHANNELS]; - - -/**************************************************************************** - * Private Functions - ****************************************************************************/ - -/**This sets the middle values - */ -uint8_t set_mid(void) -{ - if (0 == global_data_trylock(&global_data_rc_channels->access_conf)) { - uint8_t i; - - for (i = 0; i < NR_CHANNELS; i++) { - if (i == global_data_rc_channels->function[ROLL] || - i == global_data_rc_channels->function[YAW] || - i == global_data_rc_channels->function[PITCH]) { - - mid_values[i] = global_data_rc_channels->chan[i].raw; - - } else { - mid_values[i] = (max_values[i] + min_values[i]) / 2; - } - - } - - global_data_unlock(&global_data_rc_channels->access_conf); - return 0; - - } else - return -1; -} - -/**This gets all current values and writes them to min or max - */ -uint8_t get_value(void) -{ - if (0 == global_data_trylock(&global_data_rc_channels->access_conf)) { - uint8_t i; - - for (i = 0; i < NR_CHANNELS; i++) { - //see if the value is bigger or smaller than 1500 (roughly neutral) - //and write to the appropriate array - if (global_data_rc_channels->chan[i].raw != 0 && - global_data_rc_channels->chan[i].raw < 1500) { - min_values[i] = global_data_rc_channels->chan[i].raw; - - } else if (global_data_rc_channels->chan[i].raw != 0 && - global_data_rc_channels->chan[i].raw > 1500) { - max_values[i] = global_data_rc_channels->chan[i].raw; - - } else { - max_values[i] = 0; - min_values[i] = 0; - } - } - - global_data_unlock(&global_data_rc_channels->access_conf); - return 0; - - } else - return -1; -} - - -void write_data(void) -{ - // global_data_lock(&global_data_rc_channels->access_conf); - // uint8_t i; - // for(i=0; i < NR_CHANNELS; i++){ - // //Write the data to global_data_rc_channels (if not 0) - // if(mid_values[i]!=0 && min_values[i]!=0 && max_values[i]!=0){ - // global_data_rc_channels->chan[i].scaling_factor = - // 10000/((max_values[i] - min_values[i])/2); - // - // global_data_rc_channels->chan[i].mid = mid_values[i]; - // } - // - // printf("Channel %i\t Function %s \t\t Min %i\t\t Max %i\t\t Scaling Factor: %i\t Middle Value %i\n", - // i, - // global_data_rc_channels->function_name[global_data_rc_channels->function[i]], - // min_values[i], max_values[i], - // global_data_rc_channels->chan[i].scaling_factor, - // global_data_rc_channels->chan[i].mid); - // } - // global_data_unlock(&global_data_rc_channels->access_conf); - - //Write to the Parameter storage - - global_data_parameter_storage->pm.param_values[PARAM_RC1_MIN] = min_values[0]; - global_data_parameter_storage->pm.param_values[PARAM_RC2_MIN] = min_values[1]; - global_data_parameter_storage->pm.param_values[PARAM_RC3_MIN] = min_values[2]; - global_data_parameter_storage->pm.param_values[PARAM_RC4_MIN] = min_values[3]; - global_data_parameter_storage->pm.param_values[PARAM_RC5_MIN] = min_values[4]; - global_data_parameter_storage->pm.param_values[PARAM_RC6_MIN] = min_values[5]; - global_data_parameter_storage->pm.param_values[PARAM_RC7_MIN] = min_values[6]; - global_data_parameter_storage->pm.param_values[PARAM_RC8_MIN] = min_values[7]; - - - global_data_parameter_storage->pm.param_values[PARAM_RC1_MAX] = max_values[0]; - global_data_parameter_storage->pm.param_values[PARAM_RC2_MAX] = max_values[1]; - global_data_parameter_storage->pm.param_values[PARAM_RC3_MAX] = max_values[2]; - global_data_parameter_storage->pm.param_values[PARAM_RC4_MAX] = max_values[3]; - global_data_parameter_storage->pm.param_values[PARAM_RC5_MAX] = max_values[4]; - global_data_parameter_storage->pm.param_values[PARAM_RC6_MAX] = max_values[5]; - global_data_parameter_storage->pm.param_values[PARAM_RC7_MAX] = max_values[6]; - global_data_parameter_storage->pm.param_values[PARAM_RC8_MAX] = max_values[7]; - - - global_data_parameter_storage->pm.param_values[PARAM_RC1_TRIM] = mid_values[0]; - global_data_parameter_storage->pm.param_values[PARAM_RC2_TRIM] = mid_values[1]; - global_data_parameter_storage->pm.param_values[PARAM_RC3_TRIM] = mid_values[2]; - global_data_parameter_storage->pm.param_values[PARAM_RC4_TRIM] = mid_values[3]; - global_data_parameter_storage->pm.param_values[PARAM_RC5_TRIM] = mid_values[4]; - global_data_parameter_storage->pm.param_values[PARAM_RC6_TRIM] = mid_values[5]; - global_data_parameter_storage->pm.param_values[PARAM_RC7_TRIM] = mid_values[6]; - global_data_parameter_storage->pm.param_values[PARAM_RC8_TRIM] = mid_values[7]; - - usleep(3e6); - uint8_t i; - - for (i = 0; i < NR_CHANNELS; i++) { - printf("Channel %i:\t\t Min %i\t\t Max %i\t\t Scaling Factor: %i\t Middle Value %i\n", - i, - min_values[i], max_values[i], - global_data_rc_channels->chan[i].scaling_factor, - global_data_rc_channels->chan[i].mid); - } - - -} - -/**************************************************************************** - * Public Functions - ****************************************************************************/ -int range_cal(int argc, char *argv[]) -{ - - printf("The range calibration routine assumes you already did the channel\n"); - printf("assignment\n"); - printf("This routine chooses the minimum, maximum and middle\n"); - printf("value for each channel separatly. The ROLL, PITCH and YAW function\n"); - printf("get their middle value from the RC direct, for the rest it is\n"); - printf("calculated out of the min and max values.\n"); - press_enter(); - - printf("Hold both sticks in lower left corner and continue\n "); - press_enter(); - usleep(500000); - - while (get_value()); - - printf("Hold both sticks in upper right corner and continue\n"); - press_enter(); - usleep(500000); - - while (get_value()); - - printf("Set the trim to 0 and leave the sticks in the neutral position\n"); - press_enter(); - - //Loop until successfull - while (set_mid()); - - //write the values to global_data_rc_channels - write_data(); - - return 0; - -} - |