diff options
Diffstat (limited to 'apps')
61 files changed, 7 insertions, 11836 deletions
diff --git a/apps/ardrone_interface/Makefile b/apps/ardrone_interface/Makefile deleted file mode 100644 index fea96082f..000000000 --- a/apps/ardrone_interface/Makefile +++ /dev/null @@ -1,42 +0,0 @@ -############################################################################ -# -# Copyright (C) 2012 PX4 Development Team. All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name PX4 nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -# -# Makefile to build ardrone interface -# - -APPNAME = ardrone_interface -PRIORITY = SCHED_PRIORITY_MAX - 15 -STACKSIZE = 2048 - -include $(APPDIR)/mk/app.mk diff --git a/apps/ardrone_interface/ardrone_interface.c b/apps/ardrone_interface/ardrone_interface.c deleted file mode 100644 index aeaf830de..000000000 --- a/apps/ardrone_interface/ardrone_interface.c +++ /dev/null @@ -1,398 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * Author: Lorenz Meier <lm@inf.ethz.ch> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/** - * @file ardrone_interface.c - * Implementation of AR.Drone 1.0 / 2.0 motor control interface. - */ - -#include <nuttx/config.h> -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <stdbool.h> -#include <unistd.h> -#include <math.h> -#include <fcntl.h> -#include <errno.h> -#include <debug.h> -#include <termios.h> -#include <time.h> -#include <systemlib/err.h> -#include <sys/prctl.h> -#include <drivers/drv_hrt.h> -#include <uORB/uORB.h> -#include <uORB/topics/vehicle_status.h> -#include <uORB/topics/actuator_controls.h> - -#include <systemlib/systemlib.h> - -#include "ardrone_motor_control.h" - -__EXPORT int ardrone_interface_main(int argc, char *argv[]); - - -static bool thread_should_exit = false; /**< Deamon exit flag */ -static bool thread_running = false; /**< Deamon status flag */ -static int ardrone_interface_task; /**< Handle of deamon task / thread */ -static int ardrone_write; /**< UART to write AR.Drone commands to */ - -/** - * Mainloop of ardrone_interface. - */ -int ardrone_interface_thread_main(int argc, char *argv[]); - -/** - * Open the UART connected to the motor controllers - */ -static int ardrone_open_uart(char *uart_name, struct termios *uart_config_original); - -/** - * Print the correct usage. - */ -static void usage(const char *reason); - -static void -usage(const char *reason) -{ - if (reason) - fprintf(stderr, "%s\n", reason); - fprintf(stderr, "usage: ardrone_interface {start|stop|status} [-d <UART>]\n\n"); - exit(1); -} - -/** - * The deamon app only briefly exists to start - * the background job. The stack size assigned in the - * Makefile does only apply to this management task. - * - * The actual stack size should be set in the call - * to task_create(). - */ -int ardrone_interface_main(int argc, char *argv[]) -{ - if (argc < 1) - usage("missing command"); - - if (!strcmp(argv[1], "start")) { - - if (thread_running) { - printf("ardrone_interface already running\n"); - /* this is not an error */ - exit(0); - } - - thread_should_exit = false; - ardrone_interface_task = task_spawn("ardrone_interface", - SCHED_DEFAULT, - SCHED_PRIORITY_MAX - 15, - 2048, - ardrone_interface_thread_main, - (argv) ? (const char **)&argv[2] : (const char **)NULL); - exit(0); - } - - if (!strcmp(argv[1], "stop")) { - thread_should_exit = true; - exit(0); - } - - if (!strcmp(argv[1], "status")) { - if (thread_running) { - printf("\tardrone_interface is running\n"); - } else { - printf("\tardrone_interface not started\n"); - } - exit(0); - } - - usage("unrecognized command"); - exit(1); -} - -static int ardrone_open_uart(char *uart_name, struct termios *uart_config_original) -{ - /* baud rate */ - int speed = B115200; - int uart; - - /* open uart */ - uart = open(uart_name, O_RDWR | O_NOCTTY); - - /* Try to set baud rate */ - struct termios uart_config; - int termios_state; - - /* Back up the original uart configuration to restore it after exit */ - if ((termios_state = tcgetattr(uart, uart_config_original)) < 0) { - fprintf(stderr, "[ardrone_interface] ERROR getting baudrate / termios config for %s: %d\n", uart_name, termios_state); - close(uart); - return -1; - } - - /* Fill the struct for the new configuration */ - tcgetattr(uart, &uart_config); - - /* Clear ONLCR flag (which appends a CR for every LF) */ - uart_config.c_oflag &= ~ONLCR; - - /* Set baud rate */ - if (cfsetispeed(&uart_config, speed) < 0 || cfsetospeed(&uart_config, speed) < 0) { - fprintf(stderr, "[ardrone_interface] ERROR setting baudrate / termios config for %s: %d (cfsetispeed, cfsetospeed)\n", uart_name, termios_state); - close(uart); - return -1; - } - - - if ((termios_state = tcsetattr(uart, TCSANOW, &uart_config)) < 0) { - fprintf(stderr, "[ardrone_interface] ERROR setting baudrate / termios config for %s (tcsetattr)\n", uart_name); - close(uart); - return -1; - } - - return uart; -} - -int ardrone_interface_thread_main(int argc, char *argv[]) -{ - thread_running = true; - - char *device = "/dev/ttyS1"; - - /* welcome user */ - printf("[ardrone_interface] Control started, taking over motors\n"); - - /* File descriptors */ - int gpios; - - char *commandline_usage = "\tusage: ardrone_interface start|status|stop [-t for motor test (10%% thrust)]\n"; - - bool motor_test_mode = false; - int test_motor = -1; - - /* read commandline arguments */ - for (int i = 0; i < argc && argv[i]; i++) { - if (strcmp(argv[i], "-t") == 0 || strcmp(argv[i], "--test") == 0) { - motor_test_mode = true; - } - - if (strcmp(argv[i], "-m") == 0 || strcmp(argv[i], "--motor") == 0) { - if (i+1 < argc) { - int motor = atoi(argv[i+1]); - if (motor > 0 && motor < 5) { - test_motor = motor; - } else { - thread_running = false; - errx(1, "supply a motor # between 1 and 4. Example: -m 1\n %s", commandline_usage); - } - } else { - thread_running = false; - errx(1, "missing parameter to -m 1..4\n %s", commandline_usage); - } - } - if (strcmp(argv[i], "-d") == 0 || strcmp(argv[i], "--device") == 0) { //device set - if (argc > i + 1) { - device = argv[i + 1]; - - } else { - thread_running = false; - errx(1, "missing parameter to -m 1..4\n %s", commandline_usage); - } - } - } - - struct termios uart_config_original; - - if (motor_test_mode) { - printf("[ardrone_interface] Motor test mode enabled, setting 10 %% thrust.\n"); - } - - /* Led animation */ - int counter = 0; - int led_counter = 0; - - /* declare and safely initialize all structs */ - struct vehicle_status_s state; - memset(&state, 0, sizeof(state)); - struct actuator_controls_s actuator_controls; - memset(&actuator_controls, 0, sizeof(actuator_controls)); - struct actuator_armed_s armed; - armed.armed = false; - - /* subscribe to attitude, motor setpoints and system state */ - int actuator_controls_sub = orb_subscribe(ORB_ID_VEHICLE_ATTITUDE_CONTROLS); - int state_sub = orb_subscribe(ORB_ID(vehicle_status)); - int armed_sub = orb_subscribe(ORB_ID(actuator_armed)); - - printf("[ardrone_interface] Motors initialized - ready.\n"); - fflush(stdout); - - /* enable UART, writes potentially an empty buffer, but multiplexing is disabled */ - ardrone_write = ardrone_open_uart(device, &uart_config_original); - - /* initialize multiplexing, deactivate all outputs - must happen after UART open to claim GPIOs on PX4FMU */ - gpios = ar_multiplexing_init(); - - if (ardrone_write < 0) { - fprintf(stderr, "[ardrone_interface] Failed opening AR.Drone UART, exiting.\n"); - thread_running = false; - exit(ERROR); - } - - /* initialize motors */ - if (OK != ar_init_motors(ardrone_write, gpios)) { - close(ardrone_write); - fprintf(stderr, "[ardrone_interface] Failed initializing AR.Drone motors, exiting.\n"); - thread_running = false; - exit(ERROR); - } - - ardrone_write_motor_commands(ardrone_write, 0, 0, 0, 0); - - - // XXX Re-done initialization to make sure it is accepted by the motors - // XXX should be removed after more testing, but no harm - - /* close uarts */ - close(ardrone_write); - - /* enable UART, writes potentially an empty buffer, but multiplexing is disabled */ - ardrone_write = ardrone_open_uart(device, &uart_config_original); - - /* initialize multiplexing, deactivate all outputs - must happen after UART open to claim GPIOs on PX4FMU */ - gpios = ar_multiplexing_init(); - - if (ardrone_write < 0) { - fprintf(stderr, "[ardrone_interface] Failed opening AR.Drone UART, exiting.\n"); - thread_running = false; - exit(ERROR); - } - - /* initialize motors */ - if (OK != ar_init_motors(ardrone_write, gpios)) { - close(ardrone_write); - fprintf(stderr, "[ardrone_interface] Failed initializing AR.Drone motors, exiting.\n"); - thread_running = false; - exit(ERROR); - } - - while (!thread_should_exit) { - - if (motor_test_mode) { - /* set motors to idle speed */ - if (test_motor > 0 && test_motor < 5) { - int motors[4] = {0, 0, 0, 0}; - motors[test_motor - 1] = 10; - ardrone_write_motor_commands(ardrone_write, motors[0], motors[1], motors[2], motors[3]); - } else { - ardrone_write_motor_commands(ardrone_write, 10, 10, 10, 10); - } - - } else { - /* MAIN OPERATION MODE */ - - /* get a local copy of the vehicle state */ - orb_copy(ORB_ID(vehicle_status), state_sub, &state); - /* get a local copy of the actuator controls */ - orb_copy(ORB_ID_VEHICLE_ATTITUDE_CONTROLS, actuator_controls_sub, &actuator_controls); - orb_copy(ORB_ID(actuator_armed), armed_sub, &armed); - - /* for now only spin if armed and immediately shut down - * if in failsafe - */ - if (armed.armed && !armed.lockdown) { - ardrone_mixing_and_output(ardrone_write, &actuator_controls); - - } else { - /* Silently lock down motor speeds to zero */ - ardrone_write_motor_commands(ardrone_write, 0, 0, 0, 0); - } - } - - if (counter % 24 == 0) { - if (led_counter == 0) ar_set_leds(ardrone_write, 0, 1, 0, 0, 0, 0, 0 , 0); - - if (led_counter == 1) ar_set_leds(ardrone_write, 1, 1, 0, 0, 0, 0, 0 , 0); - - if (led_counter == 2) ar_set_leds(ardrone_write, 1, 0, 0, 0, 0, 0, 0 , 0); - - if (led_counter == 3) ar_set_leds(ardrone_write, 0, 0, 0, 1, 0, 0, 0 , 0); - - if (led_counter == 4) ar_set_leds(ardrone_write, 0, 0, 1, 1, 0, 0, 0 , 0); - - if (led_counter == 5) ar_set_leds(ardrone_write, 0, 0, 1, 0, 0, 0, 0 , 0); - - if (led_counter == 6) ar_set_leds(ardrone_write, 0, 0, 0, 0, 0, 1, 0 , 0); - - if (led_counter == 7) ar_set_leds(ardrone_write, 0, 0, 0, 0, 1, 1, 0 , 0); - - if (led_counter == 8) ar_set_leds(ardrone_write, 0, 0, 0, 0, 1, 0, 0 , 0); - - if (led_counter == 9) ar_set_leds(ardrone_write, 0, 0, 0, 0, 0, 0, 0 , 1); - - if (led_counter == 10) ar_set_leds(ardrone_write, 0, 0, 0, 0, 0, 0, 1 , 1); - - if (led_counter == 11) ar_set_leds(ardrone_write, 0, 0, 0, 0, 0, 0, 1 , 0); - - led_counter++; - - if (led_counter == 12) led_counter = 0; - } - - /* run at approximately 200 Hz */ - usleep(4500); - - counter++; - } - - /* restore old UART config */ - int termios_state; - - if ((termios_state = tcsetattr(ardrone_write, TCSANOW, &uart_config_original)) < 0) { - fprintf(stderr, "[ardrone_interface] ERROR setting baudrate / termios config for (tcsetattr)\n"); - } - - printf("[ardrone_interface] Restored original UART config, exiting..\n"); - - /* close uarts */ - close(ardrone_write); - ar_multiplexing_deinit(gpios); - - fflush(stdout); - - thread_running = false; - - return OK; -} - diff --git a/apps/ardrone_interface/ardrone_motor_control.c b/apps/ardrone_interface/ardrone_motor_control.c deleted file mode 100644 index f15c74a22..000000000 --- a/apps/ardrone_interface/ardrone_motor_control.c +++ /dev/null @@ -1,492 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * Author: Lorenz Meier <lm@inf.ethz.ch> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/** - * @file ardrone_motor_control.c - * Implementation of AR.Drone 1.0 / 2.0 motor control interface - */ - -#include <nuttx/config.h> -#include <stdio.h> -#include <fcntl.h> -#include <unistd.h> -#include <drivers/drv_gpio.h> -#include <drivers/drv_hrt.h> -#include <uORB/uORB.h> -#include <uORB/topics/actuator_outputs.h> -#include <uORB/topics/actuator_controls_effective.h> -#include <systemlib/err.h> - -#include "ardrone_motor_control.h" - -static unsigned long motor_gpios = GPIO_EXT_1 | GPIO_EXT_2 | GPIO_MULTI_1 | GPIO_MULTI_2; -static unsigned long motor_gpio[4] = { GPIO_EXT_1, GPIO_EXT_2, GPIO_MULTI_1, GPIO_MULTI_2 }; - -typedef union { - uint16_t motor_value; - uint8_t bytes[2]; -} motor_union_t; - -#define UART_TRANSFER_TIME_BYTE_US (9+50) /**< 9 us per byte at 115200k plus overhead */ - -/** - * @brief Generate the 8-byte motor set packet - * - * @return the number of bytes (8) - */ -void ar_get_motor_packet(uint8_t *motor_buf, uint16_t motor1, uint16_t motor2, uint16_t motor3, uint16_t motor4) -{ - motor_buf[0] = 0x20; - motor_buf[1] = 0x00; - motor_buf[2] = 0x00; - motor_buf[3] = 0x00; - motor_buf[4] = 0x00; - /* - * {0x20, 0x00, 0x00, 0x00, 0x00}; - * 0x20 is start sign / motor command - */ - motor_union_t curr_motor; - uint16_t nineBitMask = 0x1FF; - - /* Set motor 1 */ - curr_motor.motor_value = (motor1 & nineBitMask) << 4; - motor_buf[0] |= curr_motor.bytes[1]; - motor_buf[1] |= curr_motor.bytes[0]; - - /* Set motor 2 */ - curr_motor.motor_value = (motor2 & nineBitMask) << 3; - motor_buf[1] |= curr_motor.bytes[1]; - motor_buf[2] |= curr_motor.bytes[0]; - - /* Set motor 3 */ - curr_motor.motor_value = (motor3 & nineBitMask) << 2; - motor_buf[2] |= curr_motor.bytes[1]; - motor_buf[3] |= curr_motor.bytes[0]; - - /* Set motor 4 */ - curr_motor.motor_value = (motor4 & nineBitMask) << 1; - motor_buf[3] |= curr_motor.bytes[1]; - motor_buf[4] |= curr_motor.bytes[0]; -} - -void ar_enable_broadcast(int fd) -{ - ar_select_motor(fd, 0); -} - -int ar_multiplexing_init() -{ - int fd; - - fd = open(GPIO_DEVICE_PATH, 0); - - if (fd < 0) { - warn("GPIO: open fail"); - return fd; - } - - /* deactivate all outputs */ - if (ioctl(fd, GPIO_SET, motor_gpios)) { - warn("GPIO: clearing pins fail"); - close(fd); - return -1; - } - - /* configure all motor select GPIOs as outputs */ - if (ioctl(fd, GPIO_SET_OUTPUT, motor_gpios) != 0) { - warn("GPIO: output set fail"); - close(fd); - return -1; - } - - return fd; -} - -int ar_multiplexing_deinit(int fd) -{ - if (fd < 0) { - printf("GPIO: no valid descriptor\n"); - return fd; - } - - int ret = 0; - - /* deselect motor 1-4 */ - ret += ioctl(fd, GPIO_SET, motor_gpios); - - if (ret != 0) { - printf("GPIO: clear failed %d times\n", ret); - } - - if (ioctl(fd, GPIO_SET_INPUT, motor_gpios) != 0) { - printf("GPIO: input set fail\n"); - return -1; - } - - close(fd); - - return ret; -} - -int ar_select_motor(int fd, uint8_t motor) -{ - int ret = 0; - /* - * Four GPIOS: - * GPIO_EXT1 - * GPIO_EXT2 - * GPIO_UART2_CTS - * GPIO_UART2_RTS - */ - - /* select motor 0 to enable broadcast */ - if (motor == 0) { - /* select motor 1-4 */ - ret += ioctl(fd, GPIO_CLEAR, motor_gpios); - - } else { - /* select reqested motor */ - ret += ioctl(fd, GPIO_CLEAR, motor_gpio[motor - 1]); - } - - return ret; -} - -int ar_deselect_motor(int fd, uint8_t motor) -{ - int ret = 0; - /* - * Four GPIOS: - * GPIO_EXT1 - * GPIO_EXT2 - * GPIO_UART2_CTS - * GPIO_UART2_RTS - */ - - if (motor == 0) { - /* deselect motor 1-4 */ - ret += ioctl(fd, GPIO_SET, motor_gpios); - - } else { - /* deselect reqested motor */ - ret = ioctl(fd, GPIO_SET, motor_gpio[motor - 1]); - } - - return ret; -} - -int ar_init_motors(int ardrone_uart, int gpios) -{ - /* Write ARDrone commands on UART2 */ - uint8_t initbuf[] = {0xE0, 0x91, 0xA1, 0x00, 0x40}; - uint8_t multicastbuf[] = {0xA0, 0xA0, 0xA0, 0xA0, 0xA0, 0xA0}; - - /* deselect all motors */ - ar_deselect_motor(gpios, 0); - - /* initialize all motors - * - select one motor at a time - * - configure motor - */ - int i; - int errcounter = 0; - - - /* initial setup run */ - for (i = 1; i < 5; ++i) { - /* Initialize motors 1-4 */ - errcounter += ar_select_motor(gpios, i); - usleep(200); - - /* - * write 0xE0 - request status - * receive one status byte - */ - write(ardrone_uart, &(initbuf[0]), 1); - fsync(ardrone_uart); - usleep(UART_TRANSFER_TIME_BYTE_US*1); - - /* - * write 0x91 - request checksum - * receive 120 status bytes - */ - write(ardrone_uart, &(initbuf[1]), 1); - fsync(ardrone_uart); - usleep(UART_TRANSFER_TIME_BYTE_US*120); - - /* - * write 0xA1 - set status OK - * receive one status byte - should be A0 - * to confirm status is OK - */ - write(ardrone_uart, &(initbuf[2]), 1); - fsync(ardrone_uart); - usleep(UART_TRANSFER_TIME_BYTE_US*1); - - /* - * set as motor i, where i = 1..4 - * receive nothing - */ - initbuf[3] = (uint8_t)i; - write(ardrone_uart, &(initbuf[3]), 1); - fsync(ardrone_uart); - - /* - * write 0x40 - check version - * receive 11 bytes encoding the version - */ - write(ardrone_uart, &(initbuf[4]), 1); - fsync(ardrone_uart); - usleep(UART_TRANSFER_TIME_BYTE_US*11); - - ar_deselect_motor(gpios, i); - /* sleep 200 ms */ - usleep(200000); - } - - /* start the multicast part */ - errcounter += ar_select_motor(gpios, 0); - usleep(200); - - /* - * first round - * write six times A0 - enable broadcast - * receive nothing - */ - write(ardrone_uart, multicastbuf, sizeof(multicastbuf)); - fsync(ardrone_uart); - usleep(UART_TRANSFER_TIME_BYTE_US * sizeof(multicastbuf)); - - /* - * second round - * write six times A0 - enable broadcast - * receive nothing - */ - write(ardrone_uart, multicastbuf, sizeof(multicastbuf)); - fsync(ardrone_uart); - usleep(UART_TRANSFER_TIME_BYTE_US * sizeof(multicastbuf)); - - /* set motors to zero speed (fsync is part of the write command */ - ardrone_write_motor_commands(ardrone_uart, 0, 0, 0, 0); - - if (errcounter != 0) { - fprintf(stderr, "[ardrone_interface] init sequence incomplete, failed %d times", -errcounter); - fflush(stdout); - } - return errcounter; -} - -/** - * Sets the leds on the motor controllers, 1 turns led on, 0 off. - */ -void ar_set_leds(int ardrone_uart, uint8_t led1_red, uint8_t led1_green, uint8_t led2_red, uint8_t led2_green, uint8_t led3_red, uint8_t led3_green, uint8_t led4_red, uint8_t led4_green) -{ - /* - * 2 bytes are sent. The first 3 bits describe the command: 011 means led control - * the following 4 bits are the red leds for motor 4, 3, 2, 1 - * then 4 bits with unknown function, then 4 bits for green leds for motor 4, 3, 2, 1 - * the last bit is unknown. - * - * The packet is therefore: - * 011 rrrr 0000 gggg 0 - */ - uint8_t leds[2]; - leds[0] = 0x60 | ((led4_red & 0x01) << 4) | ((led3_red & 0x01) << 3) | ((led2_red & 0x01) << 2) | ((led1_red & 0x01) << 1); - leds[1] = ((led4_green & 0x01) << 4) | ((led3_green & 0x01) << 3) | ((led2_green & 0x01) << 2) | ((led1_green & 0x01) << 1); - write(ardrone_uart, leds, 2); -} - -int ardrone_write_motor_commands(int ardrone_fd, uint16_t motor1, uint16_t motor2, uint16_t motor3, uint16_t motor4) { - const unsigned int min_motor_interval = 4900; - static uint64_t last_motor_time = 0; - - static struct actuator_outputs_s outputs; - outputs.timestamp = hrt_absolute_time(); - outputs.output[0] = motor1; - outputs.output[1] = motor2; - outputs.output[2] = motor3; - outputs.output[3] = motor4; - static orb_advert_t pub = 0; - if (pub == 0) { - pub = orb_advertise(ORB_ID_VEHICLE_CONTROLS, &outputs); - } - - if (hrt_absolute_time() - last_motor_time > min_motor_interval) { - uint8_t buf[5] = {0}; - ar_get_motor_packet(buf, motor1, motor2, motor3, motor4); - int ret; - ret = write(ardrone_fd, buf, sizeof(buf)); - fsync(ardrone_fd); - - /* publish just written values */ - orb_publish(ORB_ID_VEHICLE_CONTROLS, pub, &outputs); - - if (ret == sizeof(buf)) { - return OK; - } else { - return ret; - } - } else { - return -ERROR; - } -} - -void ardrone_mixing_and_output(int ardrone_write, const struct actuator_controls_s *actuators) { - - float roll_control = actuators->control[0]; - float pitch_control = actuators->control[1]; - float yaw_control = actuators->control[2]; - float motor_thrust = actuators->control[3]; - - //printf("AMO: Roll: %4.4f, Pitch: %4.4f, Yaw: %4.4f, Thrust: %4.4f\n",roll_control, pitch_control, yaw_control, motor_thrust); - - const float min_thrust = 0.02f; /**< 2% minimum thrust */ - const float max_thrust = 1.0f; /**< 100% max thrust */ - const float scaling = 500.0f; /**< 100% thrust equals a value of 500 which works, 512 leads to cutoff */ - const float min_gas = min_thrust * scaling; /**< value range sent to motors, minimum */ - const float max_gas = max_thrust * scaling; /**< value range sent to motors, maximum */ - - /* initialize all fields to zero */ - uint16_t motor_pwm[4] = {0}; - float motor_calc[4] = {0}; - - float output_band = 0.0f; - float band_factor = 0.75f; - const float startpoint_full_control = 0.25f; /**< start full control at 25% thrust */ - float yaw_factor = 1.0f; - - static bool initialized = false; - /* publish effective outputs */ - static struct actuator_controls_effective_s actuator_controls_effective; - static orb_advert_t actuator_controls_effective_pub; - - if (motor_thrust <= min_thrust) { - motor_thrust = min_thrust; - output_band = 0.0f; - } else if (motor_thrust < startpoint_full_control && motor_thrust > min_thrust) { - output_band = band_factor * (motor_thrust - min_thrust); - } else if (motor_thrust >= startpoint_full_control && motor_thrust < max_thrust - band_factor * startpoint_full_control) { - output_band = band_factor * startpoint_full_control; - } else if (motor_thrust >= max_thrust - band_factor * startpoint_full_control) { - output_band = band_factor * (max_thrust - motor_thrust); - } - - //add the yaw, nick and roll components to the basic thrust //TODO:this should be done by the mixer - - // FRONT (MOTOR 1) - motor_calc[0] = motor_thrust + (roll_control / 2 + pitch_control / 2 - yaw_control); - - // RIGHT (MOTOR 2) - motor_calc[1] = motor_thrust + (-roll_control / 2 + pitch_control / 2 + yaw_control); - - // BACK (MOTOR 3) - motor_calc[2] = motor_thrust + (-roll_control / 2 - pitch_control / 2 - yaw_control); - - // LEFT (MOTOR 4) - motor_calc[3] = motor_thrust + (roll_control / 2 - pitch_control / 2 + yaw_control); - - // if we are not in the output band - if (!(motor_calc[0] < motor_thrust + output_band && motor_calc[0] > motor_thrust - output_band - && motor_calc[1] < motor_thrust + output_band && motor_calc[1] > motor_thrust - output_band - && motor_calc[2] < motor_thrust + output_band && motor_calc[2] > motor_thrust - output_band - && motor_calc[3] < motor_thrust + output_band && motor_calc[3] > motor_thrust - output_band)) { - - yaw_factor = 0.5f; - yaw_control *= yaw_factor; - // FRONT (MOTOR 1) - motor_calc[0] = motor_thrust + (roll_control / 2 + pitch_control / 2 - yaw_control); - - // RIGHT (MOTOR 2) - motor_calc[1] = motor_thrust + (-roll_control / 2 + pitch_control / 2 + yaw_control); - - // BACK (MOTOR 3) - motor_calc[2] = motor_thrust + (-roll_control / 2 - pitch_control / 2 - yaw_control); - - // LEFT (MOTOR 4) - motor_calc[3] = motor_thrust + (roll_control / 2 - pitch_control / 2 + yaw_control); - } - - for (int i = 0; i < 4; i++) { - //check for limits - if (motor_calc[i] < motor_thrust - output_band) { - motor_calc[i] = motor_thrust - output_band; - } - - if (motor_calc[i] > motor_thrust + output_band) { - motor_calc[i] = motor_thrust + output_band; - } - } - - /* publish effective outputs */ - actuator_controls_effective.control_effective[0] = roll_control; - actuator_controls_effective.control_effective[1] = pitch_control; - /* yaw output after limiting */ - actuator_controls_effective.control_effective[2] = yaw_control; - /* possible motor thrust limiting */ - actuator_controls_effective.control_effective[3] = (motor_calc[0] + motor_calc[1] + motor_calc[2] + motor_calc[3]) / 4.0f; - - if (!initialized) { - /* advertise and publish */ - actuator_controls_effective_pub = orb_advertise(ORB_ID_VEHICLE_ATTITUDE_CONTROLS_EFFECTIVE, &actuator_controls_effective); - initialized = true; - } else { - /* already initialized, just publishing */ - orb_publish(ORB_ID_VEHICLE_ATTITUDE_CONTROLS_EFFECTIVE, actuator_controls_effective_pub, &actuator_controls_effective); - } - - /* set the motor values */ - - /* scale up from 0..1 to 10..512) */ - motor_pwm[0] = (uint16_t) (motor_calc[0] * ((float)max_gas - min_gas) + min_gas); - motor_pwm[1] = (uint16_t) (motor_calc[1] * ((float)max_gas - min_gas) + min_gas); - motor_pwm[2] = (uint16_t) (motor_calc[2] * ((float)max_gas - min_gas) + min_gas); - motor_pwm[3] = (uint16_t) (motor_calc[3] * ((float)max_gas - min_gas) + min_gas); - - /* Keep motors spinning while armed and prevent overflows */ - - /* Failsafe logic - should never be necessary */ - motor_pwm[0] = (motor_pwm[0] > 0) ? motor_pwm[0] : 10; - motor_pwm[1] = (motor_pwm[1] > 0) ? motor_pwm[1] : 10; - motor_pwm[2] = (motor_pwm[2] > 0) ? motor_pwm[2] : 10; - motor_pwm[3] = (motor_pwm[3] > 0) ? motor_pwm[3] : 10; - - /* Failsafe logic - should never be necessary */ - motor_pwm[0] = (motor_pwm[0] <= 512) ? motor_pwm[0] : 512; - motor_pwm[1] = (motor_pwm[1] <= 512) ? motor_pwm[1] : 512; - motor_pwm[2] = (motor_pwm[2] <= 512) ? motor_pwm[2] : 512; - motor_pwm[3] = (motor_pwm[3] <= 512) ? motor_pwm[3] : 512; - - /* send motors via UART */ - ardrone_write_motor_commands(ardrone_write, motor_pwm[0], motor_pwm[1], motor_pwm[2], motor_pwm[3]); -} diff --git a/apps/ardrone_interface/ardrone_motor_control.h b/apps/ardrone_interface/ardrone_motor_control.h deleted file mode 100644 index 78b603b63..000000000 --- a/apps/ardrone_interface/ardrone_motor_control.h +++ /dev/null @@ -1,93 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * Author: Lorenz Meier <lm@inf.ethz.ch> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/** - * @file ardrone_motor_control.h - * Definition of AR.Drone 1.0 / 2.0 motor control interface - */ - -#include <uORB/uORB.h> -#include <uORB/topics/actuator_controls.h> - -/** - * Generate the 5-byte motor set packet. - * - * @return the number of bytes (5) - */ -void ar_get_motor_packet(uint8_t *motor_buf, uint16_t motor1, uint16_t motor2, uint16_t motor3, uint16_t motor4); - -/** - * Select a motor in the multiplexing. - * - * @param fd GPIO file descriptor - * @param motor Motor number, from 1 to 4, 0 selects all - */ -int ar_select_motor(int fd, uint8_t motor); - -/** - * Deselect a motor in the multiplexing. - * - * @param fd GPIO file descriptor - * @param motor Motor number, from 1 to 4, 0 deselects all - */ -int ar_deselect_motor(int fd, uint8_t motor); - -void ar_enable_broadcast(int fd); - -int ar_multiplexing_init(void); -int ar_multiplexing_deinit(int fd); - -/** - * Write four motor commands to an already initialized port. - * - * Writing 0 stops a motor, values from 1-512 encode the full thrust range. - * on some motor controller firmware revisions a minimum value of 10 is - * required to spin the motors. - */ -int ardrone_write_motor_commands(int ardrone_fd, uint16_t motor1, uint16_t motor2, uint16_t motor3, uint16_t motor4); - -/** - * Initialize the motors. - */ -int ar_init_motors(int ardrone_uart, int gpio); - -/** - * Set LED pattern. - */ -void ar_set_leds(int ardrone_uart, uint8_t led1_red, uint8_t led1_green, uint8_t led2_red, uint8_t led2_green, uint8_t led3_red, uint8_t led3_green, uint8_t led4_red, uint8_t led4_green); - -/** - * Mix motors and output actuators - */ -void ardrone_mixing_and_output(int ardrone_write, const struct actuator_controls_s *actuators); diff --git a/apps/attitude_estimator_ekf/Makefile b/apps/attitude_estimator_ekf/Makefile deleted file mode 100755 index 46a54c660..000000000 --- a/apps/attitude_estimator_ekf/Makefile +++ /dev/null @@ -1,57 +0,0 @@ -############################################################################ -# -# Copyright (C) 2012 PX4 Development Team. All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name PX4 nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -APPNAME = attitude_estimator_ekf -PRIORITY = SCHED_PRIORITY_DEFAULT -STACKSIZE = 2048 - -CXXSRCS = attitude_estimator_ekf_main.cpp - -CSRCS = attitude_estimator_ekf_params.c \ - codegen/eye.c \ - codegen/attitudeKalmanfilter.c \ - codegen/mrdivide.c \ - codegen/rdivide.c \ - codegen/attitudeKalmanfilter_initialize.c \ - codegen/attitudeKalmanfilter_terminate.c \ - codegen/rt_nonfinite.c \ - codegen/rtGetInf.c \ - codegen/rtGetNaN.c \ - codegen/norm.c \ - codegen/cross.c - - -# XXX this is *horribly* broken -INCLUDES += $(TOPDIR)/../mavlink/include/mavlink - -include $(APPDIR)/mk/app.mk diff --git a/apps/attitude_estimator_ekf/attitude_estimator_ekf_main.cpp b/apps/attitude_estimator_ekf/attitude_estimator_ekf_main.cpp deleted file mode 100755 index 1a50dde0f..000000000 --- a/apps/attitude_estimator_ekf/attitude_estimator_ekf_main.cpp +++ /dev/null @@ -1,472 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * Author: Tobias Naegeli <naegelit@student.ethz.ch> - * Lorenz Meier <lm@inf.ethz.ch> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* - * @file attitude_estimator_ekf_main.c - * - * Extended Kalman Filter for Attitude Estimation. - */ - -#include <nuttx/config.h> -#include <unistd.h> -#include <stdlib.h> -#include <stdio.h> -#include <stdbool.h> -#include <poll.h> -#include <fcntl.h> -#include <v1.0/common/mavlink.h> -#include <float.h> -#include <nuttx/sched.h> -#include <sys/prctl.h> -#include <termios.h> -#include <errno.h> -#include <limits.h> -#include <math.h> -#include <uORB/uORB.h> -#include <uORB/topics/debug_key_value.h> -#include <uORB/topics/sensor_combined.h> -#include <uORB/topics/vehicle_attitude.h> -#include <uORB/topics/vehicle_status.h> -#include <uORB/topics/parameter_update.h> -#include <drivers/drv_hrt.h> - -#include <systemlib/systemlib.h> -#include <systemlib/perf_counter.h> -#include <systemlib/err.h> - -#ifdef __cplusplus -extern "C" { -#endif -#include "codegen/attitudeKalmanfilter_initialize.h" -#include "codegen/attitudeKalmanfilter.h" -#include "attitude_estimator_ekf_params.h" -#ifdef __cplusplus -} -#endif - -extern "C" __EXPORT int attitude_estimator_ekf_main(int argc, char *argv[]); - -static bool thread_should_exit = false; /**< Deamon exit flag */ -static bool thread_running = false; /**< Deamon status flag */ -static int attitude_estimator_ekf_task; /**< Handle of deamon task / thread */ - -/** - * Mainloop of attitude_estimator_ekf. - */ -int attitude_estimator_ekf_thread_main(int argc, char *argv[]); - -/** - * Print the correct usage. - */ -static void usage(const char *reason); - -static void -usage(const char *reason) -{ - if (reason) - fprintf(stderr, "%s\n", reason); - - fprintf(stderr, "usage: attitude_estimator_ekf {start|stop|status} [-p <additional params>]\n\n"); - exit(1); -} - -/** - * The attitude_estimator_ekf app only briefly exists to start - * the background job. The stack size assigned in the - * Makefile does only apply to this management task. - * - * The actual stack size should be set in the call - * to task_create(). - */ -int attitude_estimator_ekf_main(int argc, char *argv[]) -{ - if (argc < 1) - usage("missing command"); - - if (!strcmp(argv[1], "start")) { - - if (thread_running) { - printf("attitude_estimator_ekf already running\n"); - /* this is not an error */ - exit(0); - } - - thread_should_exit = false; - attitude_estimator_ekf_task = task_spawn("attitude_estimator_ekf", - SCHED_DEFAULT, - SCHED_PRIORITY_MAX - 5, - 12400, - attitude_estimator_ekf_thread_main, - (argv) ? (const char **)&argv[2] : (const char **)NULL); - exit(0); - } - - if (!strcmp(argv[1], "stop")) { - thread_should_exit = true; - exit(0); - } - - if (!strcmp(argv[1], "status")) { - if (thread_running) { - printf("\tattitude_estimator_ekf app is running\n"); - - } else { - printf("\tattitude_estimator_ekf app not started\n"); - } - - exit(0); - } - - usage("unrecognized command"); - exit(1); -} - -/* - * [Rot_matrix,x_aposteriori,P_aposteriori] = attitudeKalmanfilter(dt,z_k,x_aposteriori_k,P_aposteriori_k,knownConst) - */ - -/* - * EKF Attitude Estimator main function. - * - * Estimates the attitude recursively once started. - * - * @param argc number of commandline arguments (plus command name) - * @param argv strings containing the arguments - */ -int attitude_estimator_ekf_thread_main(int argc, char *argv[]) -{ - -const unsigned int loop_interval_alarm = 6500; // loop interval in microseconds - - float dt = 0.005f; -/* state vector x has the following entries [ax,ay,az||mx,my,mz||wox,woy,woz||wx,wy,wz]' */ - float z_k[9] = {0.0f, 0.0f, 0.0f, 0.0f, 0.0f, 9.81f, 0.2f, -0.2f, 0.2f}; /**< Measurement vector */ - float x_aposteriori_k[12]; /**< states */ - float P_aposteriori_k[144] = {100.f, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 100.f, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 100.f, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 100.f, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 100.f, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 100.f, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 100.f, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 100.f, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 100.f, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0.0f, 100.0f, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0.0f, 0, 100.0f, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0.0f, 0, 0, 100.0f, - }; /**< init: diagonal matrix with big values */ - - float x_aposteriori[12]; - float P_aposteriori[144]; - - /* output euler angles */ - float euler[3] = {0.0f, 0.0f, 0.0f}; - - float Rot_matrix[9] = {1.f, 0, 0, - 0, 1.f, 0, - 0, 0, 1.f - }; /**< init: identity matrix */ - - // print text - printf("Extended Kalman Filter Attitude Estimator initialized..\n\n"); - fflush(stdout); - - int overloadcounter = 19; - - /* Initialize filter */ - attitudeKalmanfilter_initialize(); - - /* store start time to guard against too slow update rates */ - uint64_t last_run = hrt_absolute_time(); - - struct sensor_combined_s raw; - memset(&raw, 0, sizeof(raw)); - struct vehicle_attitude_s att; - memset(&att, 0, sizeof(att)); - struct vehicle_status_s state; - memset(&state, 0, sizeof(state)); - - uint64_t last_data = 0; - uint64_t last_measurement = 0; - - /* subscribe to raw data */ - int sub_raw = orb_subscribe(ORB_ID(sensor_combined)); - /* rate-limit raw data updates to 200Hz */ - orb_set_interval(sub_raw, 4); - - /* subscribe to param changes */ - int sub_params = orb_subscribe(ORB_ID(parameter_update)); - - /* subscribe to system state*/ - int sub_state = orb_subscribe(ORB_ID(vehicle_status)); - - /* advertise attitude */ - orb_advert_t pub_att = orb_advertise(ORB_ID(vehicle_attitude), &att); - - - int loopcounter = 0; - int printcounter = 0; - - thread_running = true; - - /* advertise debug value */ - // struct debug_key_value_s dbg = { .key = "", .value = 0.0f }; - // orb_advert_t pub_dbg = -1; - - float sensor_update_hz[3] = {0.0f, 0.0f, 0.0f}; - // XXX write this out to perf regs - - /* keep track of sensor updates */ - uint32_t sensor_last_count[3] = {0, 0, 0}; - uint64_t sensor_last_timestamp[3] = {0, 0, 0}; - - struct attitude_estimator_ekf_params ekf_params; - - struct attitude_estimator_ekf_param_handles ekf_param_handles; - - /* initialize parameter handles */ - parameters_init(&ekf_param_handles); - - uint64_t start_time = hrt_absolute_time(); - bool initialized = false; - - float gyro_offsets[3] = { 0.0f, 0.0f, 0.0f }; - unsigned offset_count = 0; - - /* register the perf counter */ - perf_counter_t ekf_loop_perf = perf_alloc(PC_ELAPSED, "attitude_estimator_ekf"); - - /* Main loop*/ - while (!thread_should_exit) { - - struct pollfd fds[2]; - fds[0].fd = sub_raw; - fds[0].events = POLLIN; - fds[1].fd = sub_params; - fds[1].events = POLLIN; - int ret = poll(fds, 2, 1000); - - if (ret < 0) { - /* XXX this is seriously bad - should be an emergency */ - } else if (ret == 0) { - /* check if we're in HIL - not getting sensor data is fine then */ - orb_copy(ORB_ID(vehicle_status), sub_state, &state); - - if (!state.flag_hil_enabled) { - fprintf(stderr, - "[att ekf] WARNING: Not getting sensors - sensor app running?\n"); - } - - } else { - - /* only update parameters if they changed */ - if (fds[1].revents & POLLIN) { - /* read from param to clear updated flag */ - struct parameter_update_s update; - orb_copy(ORB_ID(parameter_update), sub_params, &update); - - /* update parameters */ - parameters_update(&ekf_param_handles, &ekf_params); - } - - /* only run filter if sensor values changed */ - if (fds[0].revents & POLLIN) { - - /* get latest measurements */ - orb_copy(ORB_ID(sensor_combined), sub_raw, &raw); - - if (!initialized) { - - gyro_offsets[0] += raw.gyro_rad_s[0]; - gyro_offsets[1] += raw.gyro_rad_s[1]; - gyro_offsets[2] += raw.gyro_rad_s[2]; - offset_count++; - - if (hrt_absolute_time() - start_time > 3000000LL) { - initialized = true; - gyro_offsets[0] /= offset_count; - gyro_offsets[1] /= offset_count; - gyro_offsets[2] /= offset_count; - } - - } else { - - perf_begin(ekf_loop_perf); - - /* Calculate data time difference in seconds */ - dt = (raw.timestamp - last_measurement) / 1000000.0f; - last_measurement = raw.timestamp; - uint8_t update_vect[3] = {0, 0, 0}; - - /* Fill in gyro measurements */ - if (sensor_last_count[0] != raw.gyro_counter) { - update_vect[0] = 1; - sensor_last_count[0] = raw.gyro_counter; - sensor_update_hz[0] = 1e6f / (raw.timestamp - sensor_last_timestamp[0]); - sensor_last_timestamp[0] = raw.timestamp; - } - - z_k[0] = raw.gyro_rad_s[0] - gyro_offsets[0]; - z_k[1] = raw.gyro_rad_s[1] - gyro_offsets[1]; - z_k[2] = raw.gyro_rad_s[2] - gyro_offsets[2]; - - /* update accelerometer measurements */ - if (sensor_last_count[1] != raw.accelerometer_counter) { - update_vect[1] = 1; - sensor_last_count[1] = raw.accelerometer_counter; - sensor_update_hz[1] = 1e6f / (raw.timestamp - sensor_last_timestamp[1]); - sensor_last_timestamp[1] = raw.timestamp; - } - - z_k[3] = raw.accelerometer_m_s2[0]; - z_k[4] = raw.accelerometer_m_s2[1]; - z_k[5] = raw.accelerometer_m_s2[2]; - - /* update magnetometer measurements */ - if (sensor_last_count[2] != raw.magnetometer_counter) { - update_vect[2] = 1; - sensor_last_count[2] = raw.magnetometer_counter; - sensor_update_hz[2] = 1e6f / (raw.timestamp - sensor_last_timestamp[2]); - sensor_last_timestamp[2] = raw.timestamp; - } - - z_k[6] = raw.magnetometer_ga[0]; - z_k[7] = raw.magnetometer_ga[1]; - z_k[8] = raw.magnetometer_ga[2]; - - uint64_t now = hrt_absolute_time(); - unsigned int time_elapsed = now - last_run; - last_run = now; - - if (time_elapsed > loop_interval_alarm) { - //TODO: add warning, cpu overload here - // if (overloadcounter == 20) { - // printf("CPU OVERLOAD DETECTED IN ATTITUDE ESTIMATOR EKF (%lu > %lu)\n", time_elapsed, loop_interval_alarm); - // overloadcounter = 0; - // } - - overloadcounter++; - } - - static bool const_initialized = false; - - /* initialize with good values once we have a reasonable dt estimate */ - if (!const_initialized && dt < 0.05f && dt > 0.005f) { - dt = 0.005f; - parameters_update(&ekf_param_handles, &ekf_params); - - x_aposteriori_k[0] = z_k[0]; - x_aposteriori_k[1] = z_k[1]; - x_aposteriori_k[2] = z_k[2]; - x_aposteriori_k[3] = 0.0f; - x_aposteriori_k[4] = 0.0f; - x_aposteriori_k[5] = 0.0f; - x_aposteriori_k[6] = z_k[3]; - x_aposteriori_k[7] = z_k[4]; - x_aposteriori_k[8] = z_k[5]; - x_aposteriori_k[9] = z_k[6]; - x_aposteriori_k[10] = z_k[7]; - x_aposteriori_k[11] = z_k[8]; - - const_initialized = true; - } - - /* do not execute the filter if not initialized */ - if (!const_initialized) { - continue; - } - - uint64_t timing_start = hrt_absolute_time(); - - attitudeKalmanfilter(update_vect, dt, z_k, x_aposteriori_k, P_aposteriori_k, ekf_params.q, ekf_params.r, - euler, Rot_matrix, x_aposteriori, P_aposteriori); - - /* swap values for next iteration, check for fatal inputs */ - if (isfinite(euler[0]) && isfinite(euler[1]) && isfinite(euler[2])) { - memcpy(P_aposteriori_k, P_aposteriori, sizeof(P_aposteriori_k)); - memcpy(x_aposteriori_k, x_aposteriori, sizeof(x_aposteriori_k)); - - } else { - /* due to inputs or numerical failure the output is invalid, skip it */ - continue; - } - - if (last_data > 0 && raw.timestamp - last_data > 12000) printf("[attitude estimator ekf] sensor data missed! (%llu)\n", raw.timestamp - last_data); - - last_data = raw.timestamp; - - /* send out */ - att.timestamp = raw.timestamp; - - // XXX Apply the same transformation to the rotation matrix - att.roll = euler[0] - ekf_params.roll_off; - att.pitch = euler[1] - ekf_params.pitch_off; - att.yaw = euler[2] - ekf_params.yaw_off; - - att.rollspeed = x_aposteriori[0]; - att.pitchspeed = x_aposteriori[1]; - att.yawspeed = x_aposteriori[2]; - att.rollacc = x_aposteriori[3]; - att.pitchacc = x_aposteriori[4]; - att.yawacc = x_aposteriori[5]; - - //att.yawspeed =z_k[2] ; - /* copy offsets */ - memcpy(&att.rate_offsets, &(x_aposteriori[3]), sizeof(att.rate_offsets)); - - /* copy rotation matrix */ - memcpy(&att.R, Rot_matrix, sizeof(Rot_matrix)); - att.R_valid = true; - - if (isfinite(att.roll) && isfinite(att.pitch) && isfinite(att.yaw)) { - // Broadcast - orb_publish(ORB_ID(vehicle_attitude), pub_att, &att); - - } else { - warnx("NaN in roll/pitch/yaw estimate!"); - } - - perf_end(ekf_loop_perf); - } - } - } - - loopcounter++; - } - - thread_running = false; - - return 0; -} diff --git a/apps/attitude_estimator_ekf/attitude_estimator_ekf_params.c b/apps/attitude_estimator_ekf/attitude_estimator_ekf_params.c deleted file mode 100755 index 7d3812abd..000000000 --- a/apps/attitude_estimator_ekf/attitude_estimator_ekf_params.c +++ /dev/null @@ -1,105 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * Author: Tobias Naegeli <naegelit@student.ethz.ch> - * Lorenz Meier <lm@inf.ethz.ch> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* - * @file attitude_estimator_ekf_params.c - * - * Parameters for EKF filter - */ - -#include "attitude_estimator_ekf_params.h" - -/* Extended Kalman Filter covariances */ - -/* gyro process noise */ -PARAM_DEFINE_FLOAT(EKF_ATT_V2_Q0, 1e-4f); -PARAM_DEFINE_FLOAT(EKF_ATT_V2_Q1, 0.08f); -PARAM_DEFINE_FLOAT(EKF_ATT_V2_Q2, 0.009f); -/* gyro offsets process noise */ -PARAM_DEFINE_FLOAT(EKF_ATT_V2_Q3, 0.005f); -PARAM_DEFINE_FLOAT(EKF_ATT_V2_Q4, 0.0f); - -/* gyro measurement noise */ -PARAM_DEFINE_FLOAT(EKF_ATT_V2_R0, 0.0008f); -PARAM_DEFINE_FLOAT(EKF_ATT_V2_R1, 0.8f); -PARAM_DEFINE_FLOAT(EKF_ATT_V2_R2, 1.0f); -/* accelerometer measurement noise */ -PARAM_DEFINE_FLOAT(EKF_ATT_V2_R3, 0.0f); - -/* offsets in roll, pitch and yaw of sensor plane and body */ -PARAM_DEFINE_FLOAT(ATT_ROLL_OFFS, 0.0f); -PARAM_DEFINE_FLOAT(ATT_PITCH_OFFS, 0.0f); -PARAM_DEFINE_FLOAT(ATT_YAW_OFFS, 0.0f); - -int parameters_init(struct attitude_estimator_ekf_param_handles *h) -{ - /* PID parameters */ - h->q0 = param_find("EKF_ATT_V2_Q0"); - h->q1 = param_find("EKF_ATT_V2_Q1"); - h->q2 = param_find("EKF_ATT_V2_Q2"); - h->q3 = param_find("EKF_ATT_V2_Q3"); - h->q4 = param_find("EKF_ATT_V2_Q4"); - - h->r0 = param_find("EKF_ATT_V2_R0"); - h->r1 = param_find("EKF_ATT_V2_R1"); - h->r2 = param_find("EKF_ATT_V2_R2"); - h->r3 = param_find("EKF_ATT_V2_R3"); - - h->roll_off = param_find("ATT_ROLL_OFFS"); - h->pitch_off = param_find("ATT_PITCH_OFFS"); - h->yaw_off = param_find("ATT_YAW_OFFS"); - - return OK; -} - -int parameters_update(const struct attitude_estimator_ekf_param_handles *h, struct attitude_estimator_ekf_params *p) -{ - param_get(h->q0, &(p->q[0])); - param_get(h->q1, &(p->q[1])); - param_get(h->q2, &(p->q[2])); - param_get(h->q3, &(p->q[3])); - param_get(h->q4, &(p->q[4])); - - param_get(h->r0, &(p->r[0])); - param_get(h->r1, &(p->r[1])); - param_get(h->r2, &(p->r[2])); - param_get(h->r3, &(p->r[3])); - - param_get(h->roll_off, &(p->roll_off)); - param_get(h->pitch_off, &(p->pitch_off)); - param_get(h->yaw_off, &(p->yaw_off)); - - return OK; -} diff --git a/apps/attitude_estimator_ekf/attitude_estimator_ekf_params.h b/apps/attitude_estimator_ekf/attitude_estimator_ekf_params.h deleted file mode 100755 index 09817d58e..000000000 --- a/apps/attitude_estimator_ekf/attitude_estimator_ekf_params.h +++ /dev/null @@ -1,68 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * Author: Tobias Naegeli <naegelit@student.ethz.ch> - * Lorenz Meier <lm@inf.ethz.ch> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* - * @file attitude_estimator_ekf_params.h - * - * Parameters for EKF filter - */ - -#include <systemlib/param/param.h> - -struct attitude_estimator_ekf_params { - float r[9]; - float q[12]; - float roll_off; - float pitch_off; - float yaw_off; -}; - -struct attitude_estimator_ekf_param_handles { - param_t r0, r1, r2, r3; - param_t q0, q1, q2, q3, q4; - param_t roll_off, pitch_off, yaw_off; -}; - -/** - * Initialize all parameter handles and values - * - */ -int parameters_init(struct attitude_estimator_ekf_param_handles *h); - -/** - * Update all parameters - * - */ -int parameters_update(const struct attitude_estimator_ekf_param_handles *h, struct attitude_estimator_ekf_params *p); diff --git a/apps/attitude_estimator_ekf/codegen/attitudeKalmanfilter.c b/apps/attitude_estimator_ekf/codegen/attitudeKalmanfilter.c deleted file mode 100755 index 9e97ad11a..000000000 --- a/apps/attitude_estimator_ekf/codegen/attitudeKalmanfilter.c +++ /dev/null @@ -1,1148 +0,0 @@ -/*
- * attitudeKalmanfilter.c
- *
- * Code generation for function 'attitudeKalmanfilter'
- *
- * C source code generated on: Sat Jan 19 15:25:29 2013
- *
- */
-
-/* Include files */
-#include "rt_nonfinite.h"
-#include "attitudeKalmanfilter.h"
-#include "rdivide.h"
-#include "norm.h"
-#include "cross.h"
-#include "eye.h"
-#include "mrdivide.h"
-
-/* Type Definitions */
-
-/* Named Constants */
-
-/* Variable Declarations */
-
-/* Variable Definitions */
-
-/* Function Declarations */
-static real32_T rt_atan2f_snf(real32_T u0, real32_T u1);
-
-/* Function Definitions */
-static real32_T rt_atan2f_snf(real32_T u0, real32_T u1)
-{
- real32_T y;
- int32_T b_u0;
- int32_T b_u1;
- if (rtIsNaNF(u0) || rtIsNaNF(u1)) {
- y = ((real32_T)rtNaN);
- } else if (rtIsInfF(u0) && rtIsInfF(u1)) {
- if (u0 > 0.0F) {
- b_u0 = 1;
- } else {
- b_u0 = -1;
- }
-
- if (u1 > 0.0F) {
- b_u1 = 1;
- } else {
- b_u1 = -1;
- }
-
- y = (real32_T)atan2((real32_T)b_u0, (real32_T)b_u1);
- } else if (u1 == 0.0F) {
- if (u0 > 0.0F) {
- y = RT_PIF / 2.0F;
- } else if (u0 < 0.0F) {
- y = -(RT_PIF / 2.0F);
- } else {
- y = 0.0F;
- }
- } else {
- y = (real32_T)atan2(u0, u1);
- }
-
- return y;
-}
-
-/*
- * function [eulerAngles,Rot_matrix,x_aposteriori,P_aposteriori] = attitudeKalmanfilter_wo(updateVect,dt,z,x_aposteriori_k,P_aposteriori_k,q,r)
- */
-void attitudeKalmanfilter(const uint8_T updateVect[3], real32_T dt, const
- real32_T z[9], const real32_T x_aposteriori_k[12], const real32_T
- P_aposteriori_k[144], const real32_T q[12], real32_T r[9], real32_T
- eulerAngles[3], real32_T Rot_matrix[9], real32_T x_aposteriori[12], real32_T
- P_aposteriori[144])
-{
- real32_T wak[3];
- real32_T O[9];
- real_T dv0[9];
- real32_T a[9];
- int32_T i;
- real32_T b_a[9];
- real32_T x_n_b[3];
- real32_T b_x_aposteriori_k[3];
- real32_T z_n_b[3];
- real32_T c_a[3];
- real32_T d_a[3];
- int32_T i0;
- real32_T x_apriori[12];
- real_T dv1[144];
- real32_T A_lin[144];
- static const int8_T iv0[36] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0,
- 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
-
- real32_T b_A_lin[144];
- real32_T b_q[144];
- real32_T c_A_lin[144];
- real32_T d_A_lin[144];
- real32_T e_A_lin[144];
- int32_T i1;
- real32_T P_apriori[144];
- real32_T b_P_apriori[108];
- static const int8_T iv1[108] = { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1 };
-
- real32_T K_k[108];
- real32_T fv0[81];
- static const int8_T iv2[108] = { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1 };
-
- real32_T b_r[81];
- real32_T fv1[81];
- real32_T f0;
- real32_T c_P_apriori[36];
- static const int8_T iv3[36] = { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
-
- real32_T fv2[36];
- static const int8_T iv4[36] = { 1, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
-
- real32_T c_r[9];
- real32_T b_K_k[36];
- real32_T d_P_apriori[72];
- static const int8_T iv5[72] = { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 0, 0 };
-
- real32_T c_K_k[72];
- static const int8_T iv6[72] = { 1, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0,
- 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0 };
-
- real32_T b_z[6];
- static const int8_T iv7[72] = { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1 };
-
- static const int8_T iv8[72] = { 1, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
- 0, 0, 0, 1 };
-
- real32_T fv3[6];
- real32_T c_z[6];
-
- /* Extended Attitude Kalmanfilter */
- /* */
- /* state vector x has the following entries [ax,ay,az||mx,my,mz||wox,woy,woz||wx,wy,wz]' */
- /* measurement vector z has the following entries [ax,ay,az||mx,my,mz||wmx,wmy,wmz]' */
- /* knownConst has the following entries [PrvaA,PrvarM,PrvarWO,PrvarW||MsvarA,MsvarM,MsvarW] */
- /* */
- /* [x_aposteriori,P_aposteriori] = AttKalman(dt,z_k,x_aposteriori_k,P_aposteriori_k,knownConst) */
- /* */
- /* Example.... */
- /* */
- /* $Author: Tobias Naegeli $ $Date: 2012 $ $Revision: 1 $ */
- /* coder.varsize('udpIndVect', [9,1], [1,0]) */
- /* udpIndVect=find(updVect); */
- /* process and measurement noise covariance matrix */
- /* Q = diag(q.^2*dt); */
- /* observation matrix */
- /* 'attitudeKalmanfilter:33' wx= x_aposteriori_k(1); */
- /* 'attitudeKalmanfilter:34' wy= x_aposteriori_k(2); */
- /* 'attitudeKalmanfilter:35' wz= x_aposteriori_k(3); */
- /* 'attitudeKalmanfilter:37' wax= x_aposteriori_k(4); */
- /* 'attitudeKalmanfilter:38' way= x_aposteriori_k(5); */
- /* 'attitudeKalmanfilter:39' waz= x_aposteriori_k(6); */
- /* 'attitudeKalmanfilter:41' zex= x_aposteriori_k(7); */
- /* 'attitudeKalmanfilter:42' zey= x_aposteriori_k(8); */
- /* 'attitudeKalmanfilter:43' zez= x_aposteriori_k(9); */
- /* 'attitudeKalmanfilter:45' mux= x_aposteriori_k(10); */
- /* 'attitudeKalmanfilter:46' muy= x_aposteriori_k(11); */
- /* 'attitudeKalmanfilter:47' muz= x_aposteriori_k(12); */
- /* % prediction section */
- /* body angular accelerations */
- /* 'attitudeKalmanfilter:51' wak =[wax;way;waz]; */
- wak[0] = x_aposteriori_k[3];
- wak[1] = x_aposteriori_k[4];
- wak[2] = x_aposteriori_k[5];
-
- /* body angular rates */
- /* 'attitudeKalmanfilter:54' wk =[wx; wy; wz] + dt*wak; */
- /* derivative of the prediction rotation matrix */
- /* 'attitudeKalmanfilter:57' O=[0,-wz,wy;wz,0,-wx;-wy,wx,0]'; */
- O[0] = 0.0F;
- O[1] = -x_aposteriori_k[2];
- O[2] = x_aposteriori_k[1];
- O[3] = x_aposteriori_k[2];
- O[4] = 0.0F;
- O[5] = -x_aposteriori_k[0];
- O[6] = -x_aposteriori_k[1];
- O[7] = x_aposteriori_k[0];
- O[8] = 0.0F;
-
- /* prediction of the earth z vector */
- /* 'attitudeKalmanfilter:60' zek =(eye(3)+O*dt)*[zex;zey;zez]; */
- eye(dv0);
- for (i = 0; i < 9; i++) {
- a[i] = (real32_T)dv0[i] + O[i] * dt;
- }
-
- /* prediction of the magnetic vector */
- /* 'attitudeKalmanfilter:63' muk =(eye(3)+O*dt)*[mux;muy;muz]; */
- eye(dv0);
- for (i = 0; i < 9; i++) {
- b_a[i] = (real32_T)dv0[i] + O[i] * dt;
- }
-
- /* 'attitudeKalmanfilter:65' EZ=[0,zez,-zey; */
- /* 'attitudeKalmanfilter:66' -zez,0,zex; */
- /* 'attitudeKalmanfilter:67' zey,-zex,0]'; */
- /* 'attitudeKalmanfilter:68' MA=[0,muz,-muy; */
- /* 'attitudeKalmanfilter:69' -muz,0,mux; */
- /* 'attitudeKalmanfilter:70' zey,-mux,0]'; */
- /* 'attitudeKalmanfilter:74' E=eye(3); */
- /* 'attitudeKalmanfilter:76' Z=zeros(3); */
- /* 'attitudeKalmanfilter:77' x_apriori=[wk;wak;zek;muk]; */
- x_n_b[0] = x_aposteriori_k[0];
- x_n_b[1] = x_aposteriori_k[1];
- x_n_b[2] = x_aposteriori_k[2];
- b_x_aposteriori_k[0] = x_aposteriori_k[6];
- b_x_aposteriori_k[1] = x_aposteriori_k[7];
- b_x_aposteriori_k[2] = x_aposteriori_k[8];
- z_n_b[0] = x_aposteriori_k[9];
- z_n_b[1] = x_aposteriori_k[10];
- z_n_b[2] = x_aposteriori_k[11];
- for (i = 0; i < 3; i++) {
- c_a[i] = 0.0F;
- for (i0 = 0; i0 < 3; i0++) {
- c_a[i] += a[i + 3 * i0] * b_x_aposteriori_k[i0];
- }
-
- d_a[i] = 0.0F;
- for (i0 = 0; i0 < 3; i0++) {
- d_a[i] += b_a[i + 3 * i0] * z_n_b[i0];
- }
-
- x_apriori[i] = x_n_b[i] + dt * wak[i];
- }
-
- for (i = 0; i < 3; i++) {
- x_apriori[i + 3] = wak[i];
- }
-
- for (i = 0; i < 3; i++) {
- x_apriori[i + 6] = c_a[i];
- }
-
- for (i = 0; i < 3; i++) {
- x_apriori[i + 9] = d_a[i];
- }
-
- /* 'attitudeKalmanfilter:81' A_lin=[ Z, E, Z, Z */
- /* 'attitudeKalmanfilter:82' Z, Z, Z, Z */
- /* 'attitudeKalmanfilter:83' EZ, Z, O, Z */
- /* 'attitudeKalmanfilter:84' MA, Z, Z, O]; */
- /* 'attitudeKalmanfilter:86' A_lin=eye(12)+A_lin*dt; */
- b_eye(dv1);
- for (i = 0; i < 12; i++) {
- for (i0 = 0; i0 < 3; i0++) {
- A_lin[i0 + 12 * i] = (real32_T)iv0[i0 + 3 * i];
- }
-
- for (i0 = 0; i0 < 3; i0++) {
- A_lin[(i0 + 12 * i) + 3] = 0.0F;
- }
- }
-
- A_lin[6] = 0.0F;
- A_lin[7] = x_aposteriori_k[8];
- A_lin[8] = -x_aposteriori_k[7];
- A_lin[18] = -x_aposteriori_k[8];
- A_lin[19] = 0.0F;
- A_lin[20] = x_aposteriori_k[6];
- A_lin[30] = x_aposteriori_k[7];
- A_lin[31] = -x_aposteriori_k[6];
- A_lin[32] = 0.0F;
- for (i = 0; i < 3; i++) {
- for (i0 = 0; i0 < 3; i0++) {
- A_lin[(i0 + 12 * (i + 3)) + 6] = 0.0F;
- }
- }
-
- for (i = 0; i < 3; i++) {
- for (i0 = 0; i0 < 3; i0++) {
- A_lin[(i0 + 12 * (i + 6)) + 6] = O[i0 + 3 * i];
- }
- }
-
- for (i = 0; i < 3; i++) {
- for (i0 = 0; i0 < 3; i0++) {
- A_lin[(i0 + 12 * (i + 9)) + 6] = 0.0F;
- }
- }
-
- A_lin[9] = 0.0F;
- A_lin[10] = x_aposteriori_k[11];
- A_lin[11] = -x_aposteriori_k[10];
- A_lin[21] = -x_aposteriori_k[11];
- A_lin[22] = 0.0F;
- A_lin[23] = x_aposteriori_k[9];
- A_lin[33] = x_aposteriori_k[7];
- A_lin[34] = -x_aposteriori_k[9];
- A_lin[35] = 0.0F;
- for (i = 0; i < 3; i++) {
- for (i0 = 0; i0 < 3; i0++) {
- A_lin[(i0 + 12 * (i + 3)) + 9] = 0.0F;
- }
- }
-
- for (i = 0; i < 3; i++) {
- for (i0 = 0; i0 < 3; i0++) {
- A_lin[(i0 + 12 * (i + 6)) + 9] = 0.0F;
- }
- }
-
- for (i = 0; i < 3; i++) {
- for (i0 = 0; i0 < 3; i0++) {
- A_lin[(i0 + 12 * (i + 9)) + 9] = O[i0 + 3 * i];
- }
- }
-
- for (i = 0; i < 12; i++) {
- for (i0 = 0; i0 < 12; i0++) {
- b_A_lin[i0 + 12 * i] = (real32_T)dv1[i0 + 12 * i] + A_lin[i0 + 12 * i] *
- dt;
- }
- }
-
- /* 'attitudeKalmanfilter:88' Qtemp=[ q(1), 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0; */
- /* 'attitudeKalmanfilter:89' 0, q(1), 0, 0, 0, 0, 0, 0, 0, 0, 0, 0; */
- /* 'attitudeKalmanfilter:90' 0, 0, q(1), 0, 0, 0, 0, 0, 0, 0, 0, 0; */
- /* 'attitudeKalmanfilter:91' 0, 0, 0, q(2), 0, 0, 0, 0, 0, 0, 0, 0; */
- /* 'attitudeKalmanfilter:92' 0, 0, 0, 0, q(2), 0, 0, 0, 0, 0, 0, 0; */
- /* 'attitudeKalmanfilter:93' 0, 0, 0, 0, 0, q(2), 0, 0, 0, 0, 0, 0; */
- /* 'attitudeKalmanfilter:94' 0, 0, 0, 0, 0, 0, q(3), 0, 0, 0, 0, 0; */
- /* 'attitudeKalmanfilter:95' 0, 0, 0, 0, 0, 0, 0, q(3), 0, 0, 0, 0; */
- /* 'attitudeKalmanfilter:96' 0, 0, 0, 0, 0, 0, 0, 0, q(3), 0, 0, 0; */
- /* 'attitudeKalmanfilter:97' 0, 0, 0, 0, 0, 0, 0, 0, 0, q(4), 0, 0; */
- /* 'attitudeKalmanfilter:98' 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, q(4), 0; */
- /* 'attitudeKalmanfilter:99' 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, q(4)]; */
- /* 'attitudeKalmanfilter:103' Q=A_lin*Qtemp*A_lin'; */
- /* 'attitudeKalmanfilter:106' P_apriori=A_lin*P_aposteriori_k*A_lin'+Q; */
- b_q[0] = q[0];
- b_q[12] = 0.0F;
- b_q[24] = 0.0F;
- b_q[36] = 0.0F;
- b_q[48] = 0.0F;
- b_q[60] = 0.0F;
- b_q[72] = 0.0F;
- b_q[84] = 0.0F;
- b_q[96] = 0.0F;
- b_q[108] = 0.0F;
- b_q[120] = 0.0F;
- b_q[132] = 0.0F;
- b_q[1] = 0.0F;
- b_q[13] = q[0];
- b_q[25] = 0.0F;
- b_q[37] = 0.0F;
- b_q[49] = 0.0F;
- b_q[61] = 0.0F;
- b_q[73] = 0.0F;
- b_q[85] = 0.0F;
- b_q[97] = 0.0F;
- b_q[109] = 0.0F;
- b_q[121] = 0.0F;
- b_q[133] = 0.0F;
- b_q[2] = 0.0F;
- b_q[14] = 0.0F;
- b_q[26] = q[0];
- b_q[38] = 0.0F;
- b_q[50] = 0.0F;
- b_q[62] = 0.0F;
- b_q[74] = 0.0F;
- b_q[86] = 0.0F;
- b_q[98] = 0.0F;
- b_q[110] = 0.0F;
- b_q[122] = 0.0F;
- b_q[134] = 0.0F;
- b_q[3] = 0.0F;
- b_q[15] = 0.0F;
- b_q[27] = 0.0F;
- b_q[39] = q[1];
- b_q[51] = 0.0F;
- b_q[63] = 0.0F;
- b_q[75] = 0.0F;
- b_q[87] = 0.0F;
- b_q[99] = 0.0F;
- b_q[111] = 0.0F;
- b_q[123] = 0.0F;
- b_q[135] = 0.0F;
- b_q[4] = 0.0F;
- b_q[16] = 0.0F;
- b_q[28] = 0.0F;
- b_q[40] = 0.0F;
- b_q[52] = q[1];
- b_q[64] = 0.0F;
- b_q[76] = 0.0F;
- b_q[88] = 0.0F;
- b_q[100] = 0.0F;
- b_q[112] = 0.0F;
- b_q[124] = 0.0F;
- b_q[136] = 0.0F;
- b_q[5] = 0.0F;
- b_q[17] = 0.0F;
- b_q[29] = 0.0F;
- b_q[41] = 0.0F;
- b_q[53] = 0.0F;
- b_q[65] = q[1];
- b_q[77] = 0.0F;
- b_q[89] = 0.0F;
- b_q[101] = 0.0F;
- b_q[113] = 0.0F;
- b_q[125] = 0.0F;
- b_q[137] = 0.0F;
- b_q[6] = 0.0F;
- b_q[18] = 0.0F;
- b_q[30] = 0.0F;
- b_q[42] = 0.0F;
- b_q[54] = 0.0F;
- b_q[66] = 0.0F;
- b_q[78] = q[2];
- b_q[90] = 0.0F;
- b_q[102] = 0.0F;
- b_q[114] = 0.0F;
- b_q[126] = 0.0F;
- b_q[138] = 0.0F;
- b_q[7] = 0.0F;
- b_q[19] = 0.0F;
- b_q[31] = 0.0F;
- b_q[43] = 0.0F;
- b_q[55] = 0.0F;
- b_q[67] = 0.0F;
- b_q[79] = 0.0F;
- b_q[91] = q[2];
- b_q[103] = 0.0F;
- b_q[115] = 0.0F;
- b_q[127] = 0.0F;
- b_q[139] = 0.0F;
- b_q[8] = 0.0F;
- b_q[20] = 0.0F;
- b_q[32] = 0.0F;
- b_q[44] = 0.0F;
- b_q[56] = 0.0F;
- b_q[68] = 0.0F;
- b_q[80] = 0.0F;
- b_q[92] = 0.0F;
- b_q[104] = q[2];
- b_q[116] = 0.0F;
- b_q[128] = 0.0F;
- b_q[140] = 0.0F;
- b_q[9] = 0.0F;
- b_q[21] = 0.0F;
- b_q[33] = 0.0F;
- b_q[45] = 0.0F;
- b_q[57] = 0.0F;
- b_q[69] = 0.0F;
- b_q[81] = 0.0F;
- b_q[93] = 0.0F;
- b_q[105] = 0.0F;
- b_q[117] = q[3];
- b_q[129] = 0.0F;
- b_q[141] = 0.0F;
- b_q[10] = 0.0F;
- b_q[22] = 0.0F;
- b_q[34] = 0.0F;
- b_q[46] = 0.0F;
- b_q[58] = 0.0F;
- b_q[70] = 0.0F;
- b_q[82] = 0.0F;
- b_q[94] = 0.0F;
- b_q[106] = 0.0F;
- b_q[118] = 0.0F;
- b_q[130] = q[3];
- b_q[142] = 0.0F;
- b_q[11] = 0.0F;
- b_q[23] = 0.0F;
- b_q[35] = 0.0F;
- b_q[47] = 0.0F;
- b_q[59] = 0.0F;
- b_q[71] = 0.0F;
- b_q[83] = 0.0F;
- b_q[95] = 0.0F;
- b_q[107] = 0.0F;
- b_q[119] = 0.0F;
- b_q[131] = 0.0F;
- b_q[143] = q[3];
- for (i = 0; i < 12; i++) {
- for (i0 = 0; i0 < 12; i0++) {
- A_lin[i + 12 * i0] = 0.0F;
- for (i1 = 0; i1 < 12; i1++) {
- A_lin[i + 12 * i0] += b_A_lin[i + 12 * i1] * P_aposteriori_k[i1 + 12 *
- i0];
- }
-
- c_A_lin[i + 12 * i0] = 0.0F;
- for (i1 = 0; i1 < 12; i1++) {
- c_A_lin[i + 12 * i0] += b_A_lin[i + 12 * i1] * b_q[i1 + 12 * i0];
- }
- }
-
- for (i0 = 0; i0 < 12; i0++) {
- d_A_lin[i + 12 * i0] = 0.0F;
- for (i1 = 0; i1 < 12; i1++) {
- d_A_lin[i + 12 * i0] += A_lin[i + 12 * i1] * b_A_lin[i0 + 12 * i1];
- }
-
- e_A_lin[i + 12 * i0] = 0.0F;
- for (i1 = 0; i1 < 12; i1++) {
- e_A_lin[i + 12 * i0] += c_A_lin[i + 12 * i1] * b_A_lin[i0 + 12 * i1];
- }
- }
- }
-
- for (i = 0; i < 12; i++) {
- for (i0 = 0; i0 < 12; i0++) {
- P_apriori[i0 + 12 * i] = d_A_lin[i0 + 12 * i] + e_A_lin[i0 + 12 * i];
- }
- }
-
- /* % update */
- /* 'attitudeKalmanfilter:110' if updateVect(1)==1&&updateVect(2)==1&&updateVect(3)==1 */
- if ((updateVect[0] == 1) && (updateVect[1] == 1) && (updateVect[2] == 1)) {
- /* 'attitudeKalmanfilter:111' if z(6)<4 || z(5)>15 */
- if ((z[5] < 4.0F) || (z[4] > 15.0F)) {
- /* 'attitudeKalmanfilter:112' r(2)=10000; */
- r[1] = 10000.0F;
- }
-
- /* 'attitudeKalmanfilter:114' R=[r(1),0,0,0,0,0,0,0,0; */
- /* 'attitudeKalmanfilter:115' 0,r(1),0,0,0,0,0,0,0; */
- /* 'attitudeKalmanfilter:116' 0,0,r(1),0,0,0,0,0,0; */
- /* 'attitudeKalmanfilter:117' 0,0,0,r(2),0,0,0,0,0; */
- /* 'attitudeKalmanfilter:118' 0,0,0,0,r(2),0,0,0,0; */
- /* 'attitudeKalmanfilter:119' 0,0,0,0,0,r(2),0,0,0; */
- /* 'attitudeKalmanfilter:120' 0,0,0,0,0,0,r(3),0,0; */
- /* 'attitudeKalmanfilter:121' 0,0,0,0,0,0,0,r(3),0; */
- /* 'attitudeKalmanfilter:122' 0,0,0,0,0,0,0,0,r(3)]; */
- /* observation matrix */
- /* [zw;ze;zmk]; */
- /* 'attitudeKalmanfilter:125' H_k=[ E, Z, Z, Z; */
- /* 'attitudeKalmanfilter:126' Z, Z, E, Z; */
- /* 'attitudeKalmanfilter:127' Z, Z, Z, E]; */
- /* 'attitudeKalmanfilter:129' y_k=z(1:9)-H_k*x_apriori; */
- /* 'attitudeKalmanfilter:132' S_k=H_k*P_apriori*H_k'+R; */
- /* 'attitudeKalmanfilter:133' K_k=(P_apriori*H_k'/(S_k)); */
- for (i = 0; i < 12; i++) {
- for (i0 = 0; i0 < 9; i0++) {
- b_P_apriori[i + 12 * i0] = 0.0F;
- for (i1 = 0; i1 < 12; i1++) {
- b_P_apriori[i + 12 * i0] += P_apriori[i + 12 * i1] * (real32_T)iv1[i1
- + 12 * i0];
- }
- }
- }
-
- for (i = 0; i < 9; i++) {
- for (i0 = 0; i0 < 12; i0++) {
- K_k[i + 9 * i0] = 0.0F;
- for (i1 = 0; i1 < 12; i1++) {
- K_k[i + 9 * i0] += (real32_T)iv2[i + 9 * i1] * P_apriori[i1 + 12 * i0];
- }
- }
-
- for (i0 = 0; i0 < 9; i0++) {
- fv0[i + 9 * i0] = 0.0F;
- for (i1 = 0; i1 < 12; i1++) {
- fv0[i + 9 * i0] += K_k[i + 9 * i1] * (real32_T)iv1[i1 + 12 * i0];
- }
- }
- }
-
- b_r[0] = r[0];
- b_r[9] = 0.0F;
- b_r[18] = 0.0F;
- b_r[27] = 0.0F;
- b_r[36] = 0.0F;
- b_r[45] = 0.0F;
- b_r[54] = 0.0F;
- b_r[63] = 0.0F;
- b_r[72] = 0.0F;
- b_r[1] = 0.0F;
- b_r[10] = r[0];
- b_r[19] = 0.0F;
- b_r[28] = 0.0F;
- b_r[37] = 0.0F;
- b_r[46] = 0.0F;
- b_r[55] = 0.0F;
- b_r[64] = 0.0F;
- b_r[73] = 0.0F;
- b_r[2] = 0.0F;
- b_r[11] = 0.0F;
- b_r[20] = r[0];
- b_r[29] = 0.0F;
- b_r[38] = 0.0F;
- b_r[47] = 0.0F;
- b_r[56] = 0.0F;
- b_r[65] = 0.0F;
- b_r[74] = 0.0F;
- b_r[3] = 0.0F;
- b_r[12] = 0.0F;
- b_r[21] = 0.0F;
- b_r[30] = r[1];
- b_r[39] = 0.0F;
- b_r[48] = 0.0F;
- b_r[57] = 0.0F;
- b_r[66] = 0.0F;
- b_r[75] = 0.0F;
- b_r[4] = 0.0F;
- b_r[13] = 0.0F;
- b_r[22] = 0.0F;
- b_r[31] = 0.0F;
- b_r[40] = r[1];
- b_r[49] = 0.0F;
- b_r[58] = 0.0F;
- b_r[67] = 0.0F;
- b_r[76] = 0.0F;
- b_r[5] = 0.0F;
- b_r[14] = 0.0F;
- b_r[23] = 0.0F;
- b_r[32] = 0.0F;
- b_r[41] = 0.0F;
- b_r[50] = r[1];
- b_r[59] = 0.0F;
- b_r[68] = 0.0F;
- b_r[77] = 0.0F;
- b_r[6] = 0.0F;
- b_r[15] = 0.0F;
- b_r[24] = 0.0F;
- b_r[33] = 0.0F;
- b_r[42] = 0.0F;
- b_r[51] = 0.0F;
- b_r[60] = r[2];
- b_r[69] = 0.0F;
- b_r[78] = 0.0F;
- b_r[7] = 0.0F;
- b_r[16] = 0.0F;
- b_r[25] = 0.0F;
- b_r[34] = 0.0F;
- b_r[43] = 0.0F;
- b_r[52] = 0.0F;
- b_r[61] = 0.0F;
- b_r[70] = r[2];
- b_r[79] = 0.0F;
- b_r[8] = 0.0F;
- b_r[17] = 0.0F;
- b_r[26] = 0.0F;
- b_r[35] = 0.0F;
- b_r[44] = 0.0F;
- b_r[53] = 0.0F;
- b_r[62] = 0.0F;
- b_r[71] = 0.0F;
- b_r[80] = r[2];
- for (i = 0; i < 9; i++) {
- for (i0 = 0; i0 < 9; i0++) {
- fv1[i0 + 9 * i] = fv0[i0 + 9 * i] + b_r[i0 + 9 * i];
- }
- }
-
- mrdivide(b_P_apriori, fv1, K_k);
-
- /* 'attitudeKalmanfilter:136' x_aposteriori=x_apriori+K_k*y_k; */
- for (i = 0; i < 9; i++) {
- f0 = 0.0F;
- for (i0 = 0; i0 < 12; i0++) {
- f0 += (real32_T)iv2[i + 9 * i0] * x_apriori[i0];
- }
-
- O[i] = z[i] - f0;
- }
-
- for (i = 0; i < 12; i++) {
- f0 = 0.0F;
- for (i0 = 0; i0 < 9; i0++) {
- f0 += K_k[i + 12 * i0] * O[i0];
- }
-
- x_aposteriori[i] = x_apriori[i] + f0;
- }
-
- /* 'attitudeKalmanfilter:137' P_aposteriori=(eye(12)-K_k*H_k)*P_apriori; */
- b_eye(dv1);
- for (i = 0; i < 12; i++) {
- for (i0 = 0; i0 < 12; i0++) {
- f0 = 0.0F;
- for (i1 = 0; i1 < 9; i1++) {
- f0 += K_k[i + 12 * i1] * (real32_T)iv2[i1 + 9 * i0];
- }
-
- b_A_lin[i + 12 * i0] = (real32_T)dv1[i + 12 * i0] - f0;
- }
- }
-
- for (i = 0; i < 12; i++) {
- for (i0 = 0; i0 < 12; i0++) {
- P_aposteriori[i + 12 * i0] = 0.0F;
- for (i1 = 0; i1 < 12; i1++) {
- P_aposteriori[i + 12 * i0] += b_A_lin[i + 12 * i1] * P_apriori[i1 + 12
- * i0];
- }
- }
- }
- } else {
- /* 'attitudeKalmanfilter:138' else */
- /* 'attitudeKalmanfilter:139' if updateVect(1)==1&&updateVect(2)==0&&updateVect(3)==0 */
- if ((updateVect[0] == 1) && (updateVect[1] == 0) && (updateVect[2] == 0)) {
- /* 'attitudeKalmanfilter:141' R=[r(1),0,0; */
- /* 'attitudeKalmanfilter:142' 0,r(1),0; */
- /* 'attitudeKalmanfilter:143' 0,0,r(1)]; */
- /* observation matrix */
- /* 'attitudeKalmanfilter:146' H_k=[ E, Z, Z, Z]; */
- /* 'attitudeKalmanfilter:148' y_k=z(1:3)-H_k(1:3,1:12)*x_apriori; */
- /* 'attitudeKalmanfilter:150' S_k=H_k(1:3,1:12)*P_apriori*H_k(1:3,1:12)'+R(1:3,1:3); */
- /* 'attitudeKalmanfilter:151' K_k=(P_apriori*H_k(1:3,1:12)'/(S_k)); */
- for (i = 0; i < 12; i++) {
- for (i0 = 0; i0 < 3; i0++) {
- c_P_apriori[i + 12 * i0] = 0.0F;
- for (i1 = 0; i1 < 12; i1++) {
- c_P_apriori[i + 12 * i0] += P_apriori[i + 12 * i1] * (real32_T)
- iv3[i1 + 12 * i0];
- }
- }
- }
-
- for (i = 0; i < 3; i++) {
- for (i0 = 0; i0 < 12; i0++) {
- fv2[i + 3 * i0] = 0.0F;
- for (i1 = 0; i1 < 12; i1++) {
- fv2[i + 3 * i0] += (real32_T)iv4[i + 3 * i1] * P_apriori[i1 + 12 *
- i0];
- }
- }
-
- for (i0 = 0; i0 < 3; i0++) {
- O[i + 3 * i0] = 0.0F;
- for (i1 = 0; i1 < 12; i1++) {
- O[i + 3 * i0] += fv2[i + 3 * i1] * (real32_T)iv3[i1 + 12 * i0];
- }
- }
- }
-
- c_r[0] = r[0];
- c_r[3] = 0.0F;
- c_r[6] = 0.0F;
- c_r[1] = 0.0F;
- c_r[4] = r[0];
- c_r[7] = 0.0F;
- c_r[2] = 0.0F;
- c_r[5] = 0.0F;
- c_r[8] = r[0];
- for (i = 0; i < 3; i++) {
- for (i0 = 0; i0 < 3; i0++) {
- a[i0 + 3 * i] = O[i0 + 3 * i] + c_r[i0 + 3 * i];
- }
- }
-
- b_mrdivide(c_P_apriori, a, b_K_k);
-
- /* 'attitudeKalmanfilter:154' x_aposteriori=x_apriori+K_k*y_k; */
- for (i = 0; i < 3; i++) {
- f0 = 0.0F;
- for (i0 = 0; i0 < 12; i0++) {
- f0 += (real32_T)iv4[i + 3 * i0] * x_apriori[i0];
- }
-
- x_n_b[i] = z[i] - f0;
- }
-
- for (i = 0; i < 12; i++) {
- f0 = 0.0F;
- for (i0 = 0; i0 < 3; i0++) {
- f0 += b_K_k[i + 12 * i0] * x_n_b[i0];
- }
-
- x_aposteriori[i] = x_apriori[i] + f0;
- }
-
- /* 'attitudeKalmanfilter:155' P_aposteriori=(eye(12)-K_k*H_k(1:3,1:12))*P_apriori; */
- b_eye(dv1);
- for (i = 0; i < 12; i++) {
- for (i0 = 0; i0 < 12; i0++) {
- f0 = 0.0F;
- for (i1 = 0; i1 < 3; i1++) {
- f0 += b_K_k[i + 12 * i1] * (real32_T)iv4[i1 + 3 * i0];
- }
-
- b_A_lin[i + 12 * i0] = (real32_T)dv1[i + 12 * i0] - f0;
- }
- }
-
- for (i = 0; i < 12; i++) {
- for (i0 = 0; i0 < 12; i0++) {
- P_aposteriori[i + 12 * i0] = 0.0F;
- for (i1 = 0; i1 < 12; i1++) {
- P_aposteriori[i + 12 * i0] += b_A_lin[i + 12 * i1] * P_apriori[i1 +
- 12 * i0];
- }
- }
- }
- } else {
- /* 'attitudeKalmanfilter:156' else */
- /* 'attitudeKalmanfilter:157' if updateVect(1)==1&&updateVect(2)==1&&updateVect(3)==0 */
- if ((updateVect[0] == 1) && (updateVect[1] == 1) && (updateVect[2] == 0))
- {
- /* 'attitudeKalmanfilter:158' if z(6)<4 || z(5)>15 */
- if ((z[5] < 4.0F) || (z[4] > 15.0F)) {
- /* 'attitudeKalmanfilter:159' r(2)=10000; */
- r[1] = 10000.0F;
- }
-
- /* 'attitudeKalmanfilter:162' R=[r(1),0,0,0,0,0; */
- /* 'attitudeKalmanfilter:163' 0,r(1),0,0,0,0; */
- /* 'attitudeKalmanfilter:164' 0,0,r(1),0,0,0; */
- /* 'attitudeKalmanfilter:165' 0,0,0,r(2),0,0; */
- /* 'attitudeKalmanfilter:166' 0,0,0,0,r(2),0; */
- /* 'attitudeKalmanfilter:167' 0,0,0,0,0,r(2)]; */
- /* observation matrix */
- /* 'attitudeKalmanfilter:170' H_k=[ E, Z, Z, Z; */
- /* 'attitudeKalmanfilter:171' Z, Z, E, Z]; */
- /* 'attitudeKalmanfilter:173' y_k=z(1:6)-H_k(1:6,1:12)*x_apriori; */
- /* 'attitudeKalmanfilter:175' S_k=H_k(1:6,1:12)*P_apriori*H_k(1:6,1:12)'+R(1:6,1:6); */
- /* 'attitudeKalmanfilter:176' K_k=(P_apriori*H_k(1:6,1:12)'/(S_k)); */
- for (i = 0; i < 12; i++) {
- for (i0 = 0; i0 < 6; i0++) {
- d_P_apriori[i + 12 * i0] = 0.0F;
- for (i1 = 0; i1 < 12; i1++) {
- d_P_apriori[i + 12 * i0] += P_apriori[i + 12 * i1] * (real32_T)
- iv5[i1 + 12 * i0];
- }
- }
- }
-
- for (i = 0; i < 6; i++) {
- for (i0 = 0; i0 < 12; i0++) {
- c_K_k[i + 6 * i0] = 0.0F;
- for (i1 = 0; i1 < 12; i1++) {
- c_K_k[i + 6 * i0] += (real32_T)iv6[i + 6 * i1] * P_apriori[i1 + 12
- * i0];
- }
- }
-
- for (i0 = 0; i0 < 6; i0++) {
- fv2[i + 6 * i0] = 0.0F;
- for (i1 = 0; i1 < 12; i1++) {
- fv2[i + 6 * i0] += c_K_k[i + 6 * i1] * (real32_T)iv5[i1 + 12 * i0];
- }
- }
- }
-
- b_K_k[0] = r[0];
- b_K_k[6] = 0.0F;
- b_K_k[12] = 0.0F;
- b_K_k[18] = 0.0F;
- b_K_k[24] = 0.0F;
- b_K_k[30] = 0.0F;
- b_K_k[1] = 0.0F;
- b_K_k[7] = r[0];
- b_K_k[13] = 0.0F;
- b_K_k[19] = 0.0F;
- b_K_k[25] = 0.0F;
- b_K_k[31] = 0.0F;
- b_K_k[2] = 0.0F;
- b_K_k[8] = 0.0F;
- b_K_k[14] = r[0];
- b_K_k[20] = 0.0F;
- b_K_k[26] = 0.0F;
- b_K_k[32] = 0.0F;
- b_K_k[3] = 0.0F;
- b_K_k[9] = 0.0F;
- b_K_k[15] = 0.0F;
- b_K_k[21] = r[1];
- b_K_k[27] = 0.0F;
- b_K_k[33] = 0.0F;
- b_K_k[4] = 0.0F;
- b_K_k[10] = 0.0F;
- b_K_k[16] = 0.0F;
- b_K_k[22] = 0.0F;
- b_K_k[28] = r[1];
- b_K_k[34] = 0.0F;
- b_K_k[5] = 0.0F;
- b_K_k[11] = 0.0F;
- b_K_k[17] = 0.0F;
- b_K_k[23] = 0.0F;
- b_K_k[29] = 0.0F;
- b_K_k[35] = r[1];
- for (i = 0; i < 6; i++) {
- for (i0 = 0; i0 < 6; i0++) {
- c_P_apriori[i0 + 6 * i] = fv2[i0 + 6 * i] + b_K_k[i0 + 6 * i];
- }
- }
-
- c_mrdivide(d_P_apriori, c_P_apriori, c_K_k);
-
- /* 'attitudeKalmanfilter:179' x_aposteriori=x_apriori+K_k*y_k; */
- for (i = 0; i < 6; i++) {
- f0 = 0.0F;
- for (i0 = 0; i0 < 12; i0++) {
- f0 += (real32_T)iv6[i + 6 * i0] * x_apriori[i0];
- }
-
- b_z[i] = z[i] - f0;
- }
-
- for (i = 0; i < 12; i++) {
- f0 = 0.0F;
- for (i0 = 0; i0 < 6; i0++) {
- f0 += c_K_k[i + 12 * i0] * b_z[i0];
- }
-
- x_aposteriori[i] = x_apriori[i] + f0;
- }
-
- /* 'attitudeKalmanfilter:180' P_aposteriori=(eye(12)-K_k*H_k(1:6,1:12))*P_apriori; */
- b_eye(dv1);
- for (i = 0; i < 12; i++) {
- for (i0 = 0; i0 < 12; i0++) {
- f0 = 0.0F;
- for (i1 = 0; i1 < 6; i1++) {
- f0 += c_K_k[i + 12 * i1] * (real32_T)iv6[i1 + 6 * i0];
- }
-
- b_A_lin[i + 12 * i0] = (real32_T)dv1[i + 12 * i0] - f0;
- }
- }
-
- for (i = 0; i < 12; i++) {
- for (i0 = 0; i0 < 12; i0++) {
- P_aposteriori[i + 12 * i0] = 0.0F;
- for (i1 = 0; i1 < 12; i1++) {
- P_aposteriori[i + 12 * i0] += b_A_lin[i + 12 * i1] * P_apriori[i1
- + 12 * i0];
- }
- }
- }
- } else {
- /* 'attitudeKalmanfilter:181' else */
- /* 'attitudeKalmanfilter:182' if updateVect(1)==1&&updateVect(2)==0&&updateVect(3)==1 */
- if ((updateVect[0] == 1) && (updateVect[1] == 0) && (updateVect[2] == 1))
- {
- /* 'attitudeKalmanfilter:183' R=[r(1),0,0,0,0,0; */
- /* 'attitudeKalmanfilter:184' 0,r(1),0,0,0,0; */
- /* 'attitudeKalmanfilter:185' 0,0,r(1),0,0,0; */
- /* 'attitudeKalmanfilter:186' 0,0,0,r(3),0,0; */
- /* 'attitudeKalmanfilter:187' 0,0,0,0,r(3),0; */
- /* 'attitudeKalmanfilter:188' 0,0,0,0,0,r(3)]; */
- /* observation matrix */
- /* 'attitudeKalmanfilter:191' H_k=[ E, Z, Z, Z; */
- /* 'attitudeKalmanfilter:192' Z, Z, Z, E]; */
- /* 'attitudeKalmanfilter:194' y_k=[z(1:3);z(7:9)]-H_k(1:6,1:12)*x_apriori; */
- /* 'attitudeKalmanfilter:196' S_k=H_k(1:6,1:12)*P_apriori*H_k(1:6,1:12)'+R(1:6,1:6); */
- /* 'attitudeKalmanfilter:197' K_k=(P_apriori*H_k(1:6,1:12)'/(S_k)); */
- for (i = 0; i < 12; i++) {
- for (i0 = 0; i0 < 6; i0++) {
- d_P_apriori[i + 12 * i0] = 0.0F;
- for (i1 = 0; i1 < 12; i1++) {
- d_P_apriori[i + 12 * i0] += P_apriori[i + 12 * i1] * (real32_T)
- iv7[i1 + 12 * i0];
- }
- }
- }
-
- for (i = 0; i < 6; i++) {
- for (i0 = 0; i0 < 12; i0++) {
- c_K_k[i + 6 * i0] = 0.0F;
- for (i1 = 0; i1 < 12; i1++) {
- c_K_k[i + 6 * i0] += (real32_T)iv8[i + 6 * i1] * P_apriori[i1 +
- 12 * i0];
- }
- }
-
- for (i0 = 0; i0 < 6; i0++) {
- fv2[i + 6 * i0] = 0.0F;
- for (i1 = 0; i1 < 12; i1++) {
- fv2[i + 6 * i0] += c_K_k[i + 6 * i1] * (real32_T)iv7[i1 + 12 *
- i0];
- }
- }
- }
-
- b_K_k[0] = r[0];
- b_K_k[6] = 0.0F;
- b_K_k[12] = 0.0F;
- b_K_k[18] = 0.0F;
- b_K_k[24] = 0.0F;
- b_K_k[30] = 0.0F;
- b_K_k[1] = 0.0F;
- b_K_k[7] = r[0];
- b_K_k[13] = 0.0F;
- b_K_k[19] = 0.0F;
- b_K_k[25] = 0.0F;
- b_K_k[31] = 0.0F;
- b_K_k[2] = 0.0F;
- b_K_k[8] = 0.0F;
- b_K_k[14] = r[0];
- b_K_k[20] = 0.0F;
- b_K_k[26] = 0.0F;
- b_K_k[32] = 0.0F;
- b_K_k[3] = 0.0F;
- b_K_k[9] = 0.0F;
- b_K_k[15] = 0.0F;
- b_K_k[21] = r[2];
- b_K_k[27] = 0.0F;
- b_K_k[33] = 0.0F;
- b_K_k[4] = 0.0F;
- b_K_k[10] = 0.0F;
- b_K_k[16] = 0.0F;
- b_K_k[22] = 0.0F;
- b_K_k[28] = r[2];
- b_K_k[34] = 0.0F;
- b_K_k[5] = 0.0F;
- b_K_k[11] = 0.0F;
- b_K_k[17] = 0.0F;
- b_K_k[23] = 0.0F;
- b_K_k[29] = 0.0F;
- b_K_k[35] = r[2];
- for (i = 0; i < 6; i++) {
- for (i0 = 0; i0 < 6; i0++) {
- c_P_apriori[i0 + 6 * i] = fv2[i0 + 6 * i] + b_K_k[i0 + 6 * i];
- }
- }
-
- c_mrdivide(d_P_apriori, c_P_apriori, c_K_k);
-
- /* 'attitudeKalmanfilter:200' x_aposteriori=x_apriori+K_k*y_k; */
- for (i = 0; i < 3; i++) {
- b_z[i] = z[i];
- }
-
- for (i = 0; i < 3; i++) {
- b_z[i + 3] = z[i + 6];
- }
-
- for (i = 0; i < 6; i++) {
- fv3[i] = 0.0F;
- for (i0 = 0; i0 < 12; i0++) {
- fv3[i] += (real32_T)iv8[i + 6 * i0] * x_apriori[i0];
- }
-
- c_z[i] = b_z[i] - fv3[i];
- }
-
- for (i = 0; i < 12; i++) {
- f0 = 0.0F;
- for (i0 = 0; i0 < 6; i0++) {
- f0 += c_K_k[i + 12 * i0] * c_z[i0];
- }
-
- x_aposteriori[i] = x_apriori[i] + f0;
- }
-
- /* 'attitudeKalmanfilter:201' P_aposteriori=(eye(12)-K_k*H_k(1:6,1:12))*P_apriori; */
- b_eye(dv1);
- for (i = 0; i < 12; i++) {
- for (i0 = 0; i0 < 12; i0++) {
- f0 = 0.0F;
- for (i1 = 0; i1 < 6; i1++) {
- f0 += c_K_k[i + 12 * i1] * (real32_T)iv8[i1 + 6 * i0];
- }
-
- b_A_lin[i + 12 * i0] = (real32_T)dv1[i + 12 * i0] - f0;
- }
- }
-
- for (i = 0; i < 12; i++) {
- for (i0 = 0; i0 < 12; i0++) {
- P_aposteriori[i + 12 * i0] = 0.0F;
- for (i1 = 0; i1 < 12; i1++) {
- P_aposteriori[i + 12 * i0] += b_A_lin[i + 12 * i1] *
- P_apriori[i1 + 12 * i0];
- }
- }
- }
- } else {
- /* 'attitudeKalmanfilter:202' else */
- /* 'attitudeKalmanfilter:203' x_aposteriori=x_apriori; */
- for (i = 0; i < 12; i++) {
- x_aposteriori[i] = x_apriori[i];
- }
-
- /* 'attitudeKalmanfilter:204' P_aposteriori=P_apriori; */
- memcpy(&P_aposteriori[0], &P_apriori[0], 144U * sizeof(real32_T));
- }
- }
- }
- }
-
- /* % euler anglels extraction */
- /* 'attitudeKalmanfilter:213' z_n_b = -x_aposteriori(7:9)./norm(x_aposteriori(7:9)); */
- for (i = 0; i < 3; i++) {
- x_n_b[i] = -x_aposteriori[i + 6];
- }
-
- rdivide(x_n_b, norm(*(real32_T (*)[3])&x_aposteriori[6]), z_n_b);
-
- /* 'attitudeKalmanfilter:214' m_n_b = x_aposteriori(10:12)./norm(x_aposteriori(10:12)); */
- rdivide(*(real32_T (*)[3])&x_aposteriori[9], norm(*(real32_T (*)[3])&
- x_aposteriori[9]), wak);
-
- /* 'attitudeKalmanfilter:216' y_n_b=cross(z_n_b,m_n_b); */
- for (i = 0; i < 3; i++) {
- x_n_b[i] = wak[i];
- }
-
- cross(z_n_b, x_n_b, wak);
-
- /* 'attitudeKalmanfilter:217' y_n_b=y_n_b./norm(y_n_b); */
- for (i = 0; i < 3; i++) {
- x_n_b[i] = wak[i];
- }
-
- rdivide(x_n_b, norm(wak), wak);
-
- /* 'attitudeKalmanfilter:219' x_n_b=(cross(y_n_b,z_n_b)); */
- cross(wak, z_n_b, x_n_b);
-
- /* 'attitudeKalmanfilter:220' x_n_b=x_n_b./norm(x_n_b); */
- for (i = 0; i < 3; i++) {
- b_x_aposteriori_k[i] = x_n_b[i];
- }
-
- rdivide(b_x_aposteriori_k, norm(x_n_b), x_n_b);
-
- /* 'attitudeKalmanfilter:226' Rot_matrix=[x_n_b,y_n_b,z_n_b]; */
- for (i = 0; i < 3; i++) {
- Rot_matrix[i] = x_n_b[i];
- Rot_matrix[3 + i] = wak[i];
- Rot_matrix[6 + i] = z_n_b[i];
- }
-
- /* 'attitudeKalmanfilter:230' phi=atan2(Rot_matrix(2,3),Rot_matrix(3,3)); */
- /* 'attitudeKalmanfilter:231' theta=-asin(Rot_matrix(1,3)); */
- /* 'attitudeKalmanfilter:232' psi=atan2(Rot_matrix(1,2),Rot_matrix(1,1)); */
- /* 'attitudeKalmanfilter:233' eulerAngles=[phi;theta;psi]; */
- eulerAngles[0] = rt_atan2f_snf(Rot_matrix[7], Rot_matrix[8]);
- eulerAngles[1] = -(real32_T)asin(Rot_matrix[6]);
- eulerAngles[2] = rt_atan2f_snf(Rot_matrix[3], Rot_matrix[0]);
-}
-
-/* End of code generation (attitudeKalmanfilter.c) */
diff --git a/apps/attitude_estimator_ekf/codegen/attitudeKalmanfilter.h b/apps/attitude_estimator_ekf/codegen/attitudeKalmanfilter.h deleted file mode 100755 index afa63c1a9..000000000 --- a/apps/attitude_estimator_ekf/codegen/attitudeKalmanfilter.h +++ /dev/null @@ -1,34 +0,0 @@ -/*
- * attitudeKalmanfilter.h
- *
- * Code generation for function 'attitudeKalmanfilter'
- *
- * C source code generated on: Sat Jan 19 15:25:29 2013
- *
- */
-
-#ifndef __ATTITUDEKALMANFILTER_H__
-#define __ATTITUDEKALMANFILTER_H__
-/* Include files */
-#include <math.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include <string.h>
-#include "rt_defines.h"
-#include "rt_nonfinite.h"
-
-#include "rtwtypes.h"
-#include "attitudeKalmanfilter_types.h"
-
-/* Type Definitions */
-
-/* Named Constants */
-
-/* Variable Declarations */
-
-/* Variable Definitions */
-
-/* Function Declarations */
-extern void attitudeKalmanfilter(const uint8_T updateVect[3], real32_T dt, const real32_T z[9], const real32_T x_aposteriori_k[12], const real32_T P_aposteriori_k[144], const real32_T q[12], real32_T r[9], real32_T eulerAngles[3], real32_T Rot_matrix[9], real32_T x_aposteriori[12], real32_T P_aposteriori[144]);
-#endif
-/* End of code generation (attitudeKalmanfilter.h) */
diff --git a/apps/attitude_estimator_ekf/codegen/attitudeKalmanfilter_initialize.c b/apps/attitude_estimator_ekf/codegen/attitudeKalmanfilter_initialize.c deleted file mode 100755 index 7d620d7fa..000000000 --- a/apps/attitude_estimator_ekf/codegen/attitudeKalmanfilter_initialize.c +++ /dev/null @@ -1,31 +0,0 @@ -/*
- * attitudeKalmanfilter_initialize.c
- *
- * Code generation for function 'attitudeKalmanfilter_initialize'
- *
- * C source code generated on: Sat Jan 19 15:25:29 2013
- *
- */
-
-/* Include files */
-#include "rt_nonfinite.h"
-#include "attitudeKalmanfilter.h"
-#include "attitudeKalmanfilter_initialize.h"
-
-/* Type Definitions */
-
-/* Named Constants */
-
-/* Variable Declarations */
-
-/* Variable Definitions */
-
-/* Function Declarations */
-
-/* Function Definitions */
-void attitudeKalmanfilter_initialize(void)
-{
- rt_InitInfAndNaN(8U);
-}
-
-/* End of code generation (attitudeKalmanfilter_initialize.c) */
diff --git a/apps/attitude_estimator_ekf/codegen/attitudeKalmanfilter_initialize.h b/apps/attitude_estimator_ekf/codegen/attitudeKalmanfilter_initialize.h deleted file mode 100755 index 8b599be66..000000000 --- a/apps/attitude_estimator_ekf/codegen/attitudeKalmanfilter_initialize.h +++ /dev/null @@ -1,34 +0,0 @@ -/*
- * attitudeKalmanfilter_initialize.h
- *
- * Code generation for function 'attitudeKalmanfilter_initialize'
- *
- * C source code generated on: Sat Jan 19 15:25:29 2013
- *
- */
-
-#ifndef __ATTITUDEKALMANFILTER_INITIALIZE_H__
-#define __ATTITUDEKALMANFILTER_INITIALIZE_H__
-/* Include files */
-#include <math.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include <string.h>
-#include "rt_defines.h"
-#include "rt_nonfinite.h"
-
-#include "rtwtypes.h"
-#include "attitudeKalmanfilter_types.h"
-
-/* Type Definitions */
-
-/* Named Constants */
-
-/* Variable Declarations */
-
-/* Variable Definitions */
-
-/* Function Declarations */
-extern void attitudeKalmanfilter_initialize(void);
-#endif
-/* End of code generation (attitudeKalmanfilter_initialize.h) */
diff --git a/apps/attitude_estimator_ekf/codegen/attitudeKalmanfilter_terminate.c b/apps/attitude_estimator_ekf/codegen/attitudeKalmanfilter_terminate.c deleted file mode 100755 index 7f9727419..000000000 --- a/apps/attitude_estimator_ekf/codegen/attitudeKalmanfilter_terminate.c +++ /dev/null @@ -1,31 +0,0 @@ -/*
- * attitudeKalmanfilter_terminate.c
- *
- * Code generation for function 'attitudeKalmanfilter_terminate'
- *
- * C source code generated on: Sat Jan 19 15:25:29 2013
- *
- */
-
-/* Include files */
-#include "rt_nonfinite.h"
-#include "attitudeKalmanfilter.h"
-#include "attitudeKalmanfilter_terminate.h"
-
-/* Type Definitions */
-
-/* Named Constants */
-
-/* Variable Declarations */
-
-/* Variable Definitions */
-
-/* Function Declarations */
-
-/* Function Definitions */
-void attitudeKalmanfilter_terminate(void)
-{
- /* (no terminate code required) */
-}
-
-/* End of code generation (attitudeKalmanfilter_terminate.c) */
diff --git a/apps/attitude_estimator_ekf/codegen/attitudeKalmanfilter_terminate.h b/apps/attitude_estimator_ekf/codegen/attitudeKalmanfilter_terminate.h deleted file mode 100755 index da84a5024..000000000 --- a/apps/attitude_estimator_ekf/codegen/attitudeKalmanfilter_terminate.h +++ /dev/null @@ -1,34 +0,0 @@ -/*
- * attitudeKalmanfilter_terminate.h
- *
- * Code generation for function 'attitudeKalmanfilter_terminate'
- *
- * C source code generated on: Sat Jan 19 15:25:29 2013
- *
- */
-
-#ifndef __ATTITUDEKALMANFILTER_TERMINATE_H__
-#define __ATTITUDEKALMANFILTER_TERMINATE_H__
-/* Include files */
-#include <math.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include <string.h>
-#include "rt_defines.h"
-#include "rt_nonfinite.h"
-
-#include "rtwtypes.h"
-#include "attitudeKalmanfilter_types.h"
-
-/* Type Definitions */
-
-/* Named Constants */
-
-/* Variable Declarations */
-
-/* Variable Definitions */
-
-/* Function Declarations */
-extern void attitudeKalmanfilter_terminate(void);
-#endif
-/* End of code generation (attitudeKalmanfilter_terminate.h) */
diff --git a/apps/attitude_estimator_ekf/codegen/attitudeKalmanfilter_types.h b/apps/attitude_estimator_ekf/codegen/attitudeKalmanfilter_types.h deleted file mode 100755 index 30fd1e75e..000000000 --- a/apps/attitude_estimator_ekf/codegen/attitudeKalmanfilter_types.h +++ /dev/null @@ -1,16 +0,0 @@ -/*
- * attitudeKalmanfilter_types.h
- *
- * Code generation for function 'attitudeKalmanfilter'
- *
- * C source code generated on: Sat Jan 19 15:25:29 2013
- *
- */
-
-#ifndef __ATTITUDEKALMANFILTER_TYPES_H__
-#define __ATTITUDEKALMANFILTER_TYPES_H__
-
-/* Type Definitions */
-
-#endif
-/* End of code generation (attitudeKalmanfilter_types.h) */
diff --git a/apps/attitude_estimator_ekf/codegen/cross.c b/apps/attitude_estimator_ekf/codegen/cross.c deleted file mode 100755 index 84ada9002..000000000 --- a/apps/attitude_estimator_ekf/codegen/cross.c +++ /dev/null @@ -1,37 +0,0 @@ -/*
- * cross.c
- *
- * Code generation for function 'cross'
- *
- * C source code generated on: Sat Jan 19 15:25:29 2013
- *
- */
-
-/* Include files */
-#include "rt_nonfinite.h"
-#include "attitudeKalmanfilter.h"
-#include "cross.h"
-
-/* Type Definitions */
-
-/* Named Constants */
-
-/* Variable Declarations */
-
-/* Variable Definitions */
-
-/* Function Declarations */
-
-/* Function Definitions */
-
-/*
- *
- */
-void cross(const real32_T a[3], const real32_T b[3], real32_T c[3])
-{
- c[0] = a[1] * b[2] - a[2] * b[1];
- c[1] = a[2] * b[0] - a[0] * b[2];
- c[2] = a[0] * b[1] - a[1] * b[0];
-}
-
-/* End of code generation (cross.c) */
diff --git a/apps/attitude_estimator_ekf/codegen/cross.h b/apps/attitude_estimator_ekf/codegen/cross.h deleted file mode 100755 index e727f0684..000000000 --- a/apps/attitude_estimator_ekf/codegen/cross.h +++ /dev/null @@ -1,34 +0,0 @@ -/*
- * cross.h
- *
- * Code generation for function 'cross'
- *
- * C source code generated on: Sat Jan 19 15:25:29 2013
- *
- */
-
-#ifndef __CROSS_H__
-#define __CROSS_H__
-/* Include files */
-#include <math.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include <string.h>
-#include "rt_defines.h"
-#include "rt_nonfinite.h"
-
-#include "rtwtypes.h"
-#include "attitudeKalmanfilter_types.h"
-
-/* Type Definitions */
-
-/* Named Constants */
-
-/* Variable Declarations */
-
-/* Variable Definitions */
-
-/* Function Declarations */
-extern void cross(const real32_T a[3], const real32_T b[3], real32_T c[3]);
-#endif
-/* End of code generation (cross.h) */
diff --git a/apps/attitude_estimator_ekf/codegen/eye.c b/apps/attitude_estimator_ekf/codegen/eye.c deleted file mode 100755 index b89ab58ef..000000000 --- a/apps/attitude_estimator_ekf/codegen/eye.c +++ /dev/null @@ -1,51 +0,0 @@ -/*
- * eye.c
- *
- * Code generation for function 'eye'
- *
- * C source code generated on: Sat Jan 19 15:25:29 2013
- *
- */
-
-/* Include files */
-#include "rt_nonfinite.h"
-#include "attitudeKalmanfilter.h"
-#include "eye.h"
-
-/* Type Definitions */
-
-/* Named Constants */
-
-/* Variable Declarations */
-
-/* Variable Definitions */
-
-/* Function Declarations */
-
-/* Function Definitions */
-
-/*
- *
- */
-void b_eye(real_T I[144])
-{
- int32_T i;
- memset(&I[0], 0, 144U * sizeof(real_T));
- for (i = 0; i < 12; i++) {
- I[i + 12 * i] = 1.0;
- }
-}
-
-/*
- *
- */
-void eye(real_T I[9])
-{
- int32_T i;
- memset(&I[0], 0, 9U * sizeof(real_T));
- for (i = 0; i < 3; i++) {
- I[i + 3 * i] = 1.0;
- }
-}
-
-/* End of code generation (eye.c) */
diff --git a/apps/attitude_estimator_ekf/codegen/eye.h b/apps/attitude_estimator_ekf/codegen/eye.h deleted file mode 100755 index 94fbe7671..000000000 --- a/apps/attitude_estimator_ekf/codegen/eye.h +++ /dev/null @@ -1,35 +0,0 @@ -/*
- * eye.h
- *
- * Code generation for function 'eye'
- *
- * C source code generated on: Sat Jan 19 15:25:29 2013
- *
- */
-
-#ifndef __EYE_H__
-#define __EYE_H__
-/* Include files */
-#include <math.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include <string.h>
-#include "rt_defines.h"
-#include "rt_nonfinite.h"
-
-#include "rtwtypes.h"
-#include "attitudeKalmanfilter_types.h"
-
-/* Type Definitions */
-
-/* Named Constants */
-
-/* Variable Declarations */
-
-/* Variable Definitions */
-
-/* Function Declarations */
-extern void b_eye(real_T I[144]);
-extern void eye(real_T I[9]);
-#endif
-/* End of code generation (eye.h) */
diff --git a/apps/attitude_estimator_ekf/codegen/mrdivide.c b/apps/attitude_estimator_ekf/codegen/mrdivide.c deleted file mode 100755 index a810f22e4..000000000 --- a/apps/attitude_estimator_ekf/codegen/mrdivide.c +++ /dev/null @@ -1,357 +0,0 @@ -/*
- * mrdivide.c
- *
- * Code generation for function 'mrdivide'
- *
- * C source code generated on: Sat Jan 19 15:25:29 2013
- *
- */
-
-/* Include files */
-#include "rt_nonfinite.h"
-#include "attitudeKalmanfilter.h"
-#include "mrdivide.h"
-
-/* Type Definitions */
-
-/* Named Constants */
-
-/* Variable Declarations */
-
-/* Variable Definitions */
-
-/* Function Declarations */
-
-/* Function Definitions */
-
-/*
- *
- */
-void b_mrdivide(const real32_T A[36], const real32_T B[9], real32_T y[36])
-{
- real32_T b_A[9];
- int32_T rtemp;
- int32_T k;
- real32_T b_B[36];
- int32_T r1;
- int32_T r2;
- int32_T r3;
- real32_T maxval;
- real32_T a21;
- real32_T Y[36];
- for (rtemp = 0; rtemp < 3; rtemp++) {
- for (k = 0; k < 3; k++) {
- b_A[k + 3 * rtemp] = B[rtemp + 3 * k];
- }
- }
-
- for (rtemp = 0; rtemp < 12; rtemp++) {
- for (k = 0; k < 3; k++) {
- b_B[k + 3 * rtemp] = A[rtemp + 12 * k];
- }
- }
-
- r1 = 0;
- r2 = 1;
- r3 = 2;
- maxval = (real32_T)fabs(b_A[0]);
- a21 = (real32_T)fabs(b_A[1]);
- if (a21 > maxval) {
- maxval = a21;
- r1 = 1;
- r2 = 0;
- }
-
- if ((real32_T)fabs(b_A[2]) > maxval) {
- r1 = 2;
- r2 = 1;
- r3 = 0;
- }
-
- b_A[r2] /= b_A[r1];
- b_A[r3] /= b_A[r1];
- b_A[3 + r2] -= b_A[r2] * b_A[3 + r1];
- b_A[3 + r3] -= b_A[r3] * b_A[3 + r1];
- b_A[6 + r2] -= b_A[r2] * b_A[6 + r1];
- b_A[6 + r3] -= b_A[r3] * b_A[6 + r1];
- if ((real32_T)fabs(b_A[3 + r3]) > (real32_T)fabs(b_A[3 + r2])) {
- rtemp = r2;
- r2 = r3;
- r3 = rtemp;
- }
-
- b_A[3 + r3] /= b_A[3 + r2];
- b_A[6 + r3] -= b_A[3 + r3] * b_A[6 + r2];
- for (k = 0; k < 12; k++) {
- Y[3 * k] = b_B[r1 + 3 * k];
- Y[1 + 3 * k] = b_B[r2 + 3 * k] - Y[3 * k] * b_A[r2];
- Y[2 + 3 * k] = (b_B[r3 + 3 * k] - Y[3 * k] * b_A[r3]) - Y[1 + 3 * k] * b_A[3
- + r3];
- Y[2 + 3 * k] /= b_A[6 + r3];
- Y[3 * k] -= Y[2 + 3 * k] * b_A[6 + r1];
- Y[1 + 3 * k] -= Y[2 + 3 * k] * b_A[6 + r2];
- Y[1 + 3 * k] /= b_A[3 + r2];
- Y[3 * k] -= Y[1 + 3 * k] * b_A[3 + r1];
- Y[3 * k] /= b_A[r1];
- }
-
- for (rtemp = 0; rtemp < 3; rtemp++) {
- for (k = 0; k < 12; k++) {
- y[k + 12 * rtemp] = Y[rtemp + 3 * k];
- }
- }
-}
-
-/*
- *
- */
-void c_mrdivide(const real32_T A[72], const real32_T B[36], real32_T y[72])
-{
- real32_T b_A[36];
- int8_T ipiv[6];
- int32_T i3;
- int32_T iy;
- int32_T j;
- int32_T c;
- int32_T ix;
- real32_T temp;
- int32_T k;
- real32_T s;
- int32_T jy;
- int32_T ijA;
- real32_T Y[72];
- for (i3 = 0; i3 < 6; i3++) {
- for (iy = 0; iy < 6; iy++) {
- b_A[iy + 6 * i3] = B[i3 + 6 * iy];
- }
-
- ipiv[i3] = (int8_T)(1 + i3);
- }
-
- for (j = 0; j < 5; j++) {
- c = j * 7;
- iy = 0;
- ix = c;
- temp = (real32_T)fabs(b_A[c]);
- for (k = 2; k <= 6 - j; k++) {
- ix++;
- s = (real32_T)fabs(b_A[ix]);
- if (s > temp) {
- iy = k - 1;
- temp = s;
- }
- }
-
- if (b_A[c + iy] != 0.0F) {
- if (iy != 0) {
- ipiv[j] = (int8_T)((j + iy) + 1);
- ix = j;
- iy += j;
- for (k = 0; k < 6; k++) {
- temp = b_A[ix];
- b_A[ix] = b_A[iy];
- b_A[iy] = temp;
- ix += 6;
- iy += 6;
- }
- }
-
- i3 = (c - j) + 6;
- for (jy = c + 1; jy + 1 <= i3; jy++) {
- b_A[jy] /= b_A[c];
- }
- }
-
- iy = c;
- jy = c + 6;
- for (k = 1; k <= 5 - j; k++) {
- temp = b_A[jy];
- if (b_A[jy] != 0.0F) {
- ix = c + 1;
- i3 = (iy - j) + 12;
- for (ijA = 7 + iy; ijA + 1 <= i3; ijA++) {
- b_A[ijA] += b_A[ix] * -temp;
- ix++;
- }
- }
-
- jy += 6;
- iy += 6;
- }
- }
-
- for (i3 = 0; i3 < 12; i3++) {
- for (iy = 0; iy < 6; iy++) {
- Y[iy + 6 * i3] = A[i3 + 12 * iy];
- }
- }
-
- for (jy = 0; jy < 6; jy++) {
- if (ipiv[jy] != jy + 1) {
- for (j = 0; j < 12; j++) {
- temp = Y[jy + 6 * j];
- Y[jy + 6 * j] = Y[(ipiv[jy] + 6 * j) - 1];
- Y[(ipiv[jy] + 6 * j) - 1] = temp;
- }
- }
- }
-
- for (j = 0; j < 12; j++) {
- c = 6 * j;
- for (k = 0; k < 6; k++) {
- iy = 6 * k;
- if (Y[k + c] != 0.0F) {
- for (jy = k + 2; jy < 7; jy++) {
- Y[(jy + c) - 1] -= Y[k + c] * b_A[(jy + iy) - 1];
- }
- }
- }
- }
-
- for (j = 0; j < 12; j++) {
- c = 6 * j;
- for (k = 5; k > -1; k += -1) {
- iy = 6 * k;
- if (Y[k + c] != 0.0F) {
- Y[k + c] /= b_A[k + iy];
- for (jy = 0; jy + 1 <= k; jy++) {
- Y[jy + c] -= Y[k + c] * b_A[jy + iy];
- }
- }
- }
- }
-
- for (i3 = 0; i3 < 6; i3++) {
- for (iy = 0; iy < 12; iy++) {
- y[iy + 12 * i3] = Y[i3 + 6 * iy];
- }
- }
-}
-
-/*
- *
- */
-void mrdivide(const real32_T A[108], const real32_T B[81], real32_T y[108])
-{
- real32_T b_A[81];
- int8_T ipiv[9];
- int32_T i2;
- int32_T iy;
- int32_T j;
- int32_T c;
- int32_T ix;
- real32_T temp;
- int32_T k;
- real32_T s;
- int32_T jy;
- int32_T ijA;
- real32_T Y[108];
- for (i2 = 0; i2 < 9; i2++) {
- for (iy = 0; iy < 9; iy++) {
- b_A[iy + 9 * i2] = B[i2 + 9 * iy];
- }
-
- ipiv[i2] = (int8_T)(1 + i2);
- }
-
- for (j = 0; j < 8; j++) {
- c = j * 10;
- iy = 0;
- ix = c;
- temp = (real32_T)fabs(b_A[c]);
- for (k = 2; k <= 9 - j; k++) {
- ix++;
- s = (real32_T)fabs(b_A[ix]);
- if (s > temp) {
- iy = k - 1;
- temp = s;
- }
- }
-
- if (b_A[c + iy] != 0.0F) {
- if (iy != 0) {
- ipiv[j] = (int8_T)((j + iy) + 1);
- ix = j;
- iy += j;
- for (k = 0; k < 9; k++) {
- temp = b_A[ix];
- b_A[ix] = b_A[iy];
- b_A[iy] = temp;
- ix += 9;
- iy += 9;
- }
- }
-
- i2 = (c - j) + 9;
- for (jy = c + 1; jy + 1 <= i2; jy++) {
- b_A[jy] /= b_A[c];
- }
- }
-
- iy = c;
- jy = c + 9;
- for (k = 1; k <= 8 - j; k++) {
- temp = b_A[jy];
- if (b_A[jy] != 0.0F) {
- ix = c + 1;
- i2 = (iy - j) + 18;
- for (ijA = 10 + iy; ijA + 1 <= i2; ijA++) {
- b_A[ijA] += b_A[ix] * -temp;
- ix++;
- }
- }
-
- jy += 9;
- iy += 9;
- }
- }
-
- for (i2 = 0; i2 < 12; i2++) {
- for (iy = 0; iy < 9; iy++) {
- Y[iy + 9 * i2] = A[i2 + 12 * iy];
- }
- }
-
- for (jy = 0; jy < 9; jy++) {
- if (ipiv[jy] != jy + 1) {
- for (j = 0; j < 12; j++) {
- temp = Y[jy + 9 * j];
- Y[jy + 9 * j] = Y[(ipiv[jy] + 9 * j) - 1];
- Y[(ipiv[jy] + 9 * j) - 1] = temp;
- }
- }
- }
-
- for (j = 0; j < 12; j++) {
- c = 9 * j;
- for (k = 0; k < 9; k++) {
- iy = 9 * k;
- if (Y[k + c] != 0.0F) {
- for (jy = k + 2; jy < 10; jy++) {
- Y[(jy + c) - 1] -= Y[k + c] * b_A[(jy + iy) - 1];
- }
- }
- }
- }
-
- for (j = 0; j < 12; j++) {
- c = 9 * j;
- for (k = 8; k > -1; k += -1) {
- iy = 9 * k;
- if (Y[k + c] != 0.0F) {
- Y[k + c] /= b_A[k + iy];
- for (jy = 0; jy + 1 <= k; jy++) {
- Y[jy + c] -= Y[k + c] * b_A[jy + iy];
- }
- }
- }
- }
-
- for (i2 = 0; i2 < 9; i2++) {
- for (iy = 0; iy < 12; iy++) {
- y[iy + 12 * i2] = Y[i2 + 9 * iy];
- }
- }
-}
-
-/* End of code generation (mrdivide.c) */
diff --git a/apps/attitude_estimator_ekf/codegen/mrdivide.h b/apps/attitude_estimator_ekf/codegen/mrdivide.h deleted file mode 100755 index 2d3b0d51f..000000000 --- a/apps/attitude_estimator_ekf/codegen/mrdivide.h +++ /dev/null @@ -1,36 +0,0 @@ -/*
- * mrdivide.h
- *
- * Code generation for function 'mrdivide'
- *
- * C source code generated on: Sat Jan 19 15:25:29 2013
- *
- */
-
-#ifndef __MRDIVIDE_H__
-#define __MRDIVIDE_H__
-/* Include files */
-#include <math.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include <string.h>
-#include "rt_defines.h"
-#include "rt_nonfinite.h"
-
-#include "rtwtypes.h"
-#include "attitudeKalmanfilter_types.h"
-
-/* Type Definitions */
-
-/* Named Constants */
-
-/* Variable Declarations */
-
-/* Variable Definitions */
-
-/* Function Declarations */
-extern void b_mrdivide(const real32_T A[36], const real32_T B[9], real32_T y[36]);
-extern void c_mrdivide(const real32_T A[72], const real32_T B[36], real32_T y[72]);
-extern void mrdivide(const real32_T A[108], const real32_T B[81], real32_T y[108]);
-#endif
-/* End of code generation (mrdivide.h) */
diff --git a/apps/attitude_estimator_ekf/codegen/norm.c b/apps/attitude_estimator_ekf/codegen/norm.c deleted file mode 100755 index 0c418cc7b..000000000 --- a/apps/attitude_estimator_ekf/codegen/norm.c +++ /dev/null @@ -1,54 +0,0 @@ -/*
- * norm.c
- *
- * Code generation for function 'norm'
- *
- * C source code generated on: Sat Jan 19 15:25:29 2013
- *
- */
-
-/* Include files */
-#include "rt_nonfinite.h"
-#include "attitudeKalmanfilter.h"
-#include "norm.h"
-
-/* Type Definitions */
-
-/* Named Constants */
-
-/* Variable Declarations */
-
-/* Variable Definitions */
-
-/* Function Declarations */
-
-/* Function Definitions */
-
-/*
- *
- */
-real32_T norm(const real32_T x[3])
-{
- real32_T y;
- real32_T scale;
- int32_T k;
- real32_T absxk;
- real32_T t;
- y = 0.0F;
- scale = 1.17549435E-38F;
- for (k = 0; k < 3; k++) {
- absxk = (real32_T)fabs(x[k]);
- if (absxk > scale) {
- t = scale / absxk;
- y = 1.0F + y * t * t;
- scale = absxk;
- } else {
- t = absxk / scale;
- y += t * t;
- }
- }
-
- return scale * (real32_T)sqrt(y);
-}
-
-/* End of code generation (norm.c) */
diff --git a/apps/attitude_estimator_ekf/codegen/norm.h b/apps/attitude_estimator_ekf/codegen/norm.h deleted file mode 100755 index 60cf77b57..000000000 --- a/apps/attitude_estimator_ekf/codegen/norm.h +++ /dev/null @@ -1,34 +0,0 @@ -/*
- * norm.h
- *
- * Code generation for function 'norm'
- *
- * C source code generated on: Sat Jan 19 15:25:29 2013
- *
- */
-
-#ifndef __NORM_H__
-#define __NORM_H__
-/* Include files */
-#include <math.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include <string.h>
-#include "rt_defines.h"
-#include "rt_nonfinite.h"
-
-#include "rtwtypes.h"
-#include "attitudeKalmanfilter_types.h"
-
-/* Type Definitions */
-
-/* Named Constants */
-
-/* Variable Declarations */
-
-/* Variable Definitions */
-
-/* Function Declarations */
-extern real32_T norm(const real32_T x[3]);
-#endif
-/* End of code generation (norm.h) */
diff --git a/apps/attitude_estimator_ekf/codegen/rdivide.c b/apps/attitude_estimator_ekf/codegen/rdivide.c deleted file mode 100755 index d035dae5e..000000000 --- a/apps/attitude_estimator_ekf/codegen/rdivide.c +++ /dev/null @@ -1,38 +0,0 @@ -/*
- * rdivide.c
- *
- * Code generation for function 'rdivide'
- *
- * C source code generated on: Sat Jan 19 15:25:29 2013
- *
- */
-
-/* Include files */
-#include "rt_nonfinite.h"
-#include "attitudeKalmanfilter.h"
-#include "rdivide.h"
-
-/* Type Definitions */
-
-/* Named Constants */
-
-/* Variable Declarations */
-
-/* Variable Definitions */
-
-/* Function Declarations */
-
-/* Function Definitions */
-
-/*
- *
- */
-void rdivide(const real32_T x[3], real32_T y, real32_T z[3])
-{
- int32_T i;
- for (i = 0; i < 3; i++) {
- z[i] = x[i] / y;
- }
-}
-
-/* End of code generation (rdivide.c) */
diff --git a/apps/attitude_estimator_ekf/codegen/rdivide.h b/apps/attitude_estimator_ekf/codegen/rdivide.h deleted file mode 100755 index 4bbebebe2..000000000 --- a/apps/attitude_estimator_ekf/codegen/rdivide.h +++ /dev/null @@ -1,34 +0,0 @@ -/*
- * rdivide.h
- *
- * Code generation for function 'rdivide'
- *
- * C source code generated on: Sat Jan 19 15:25:29 2013
- *
- */
-
-#ifndef __RDIVIDE_H__
-#define __RDIVIDE_H__
-/* Include files */
-#include <math.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include <string.h>
-#include "rt_defines.h"
-#include "rt_nonfinite.h"
-
-#include "rtwtypes.h"
-#include "attitudeKalmanfilter_types.h"
-
-/* Type Definitions */
-
-/* Named Constants */
-
-/* Variable Declarations */
-
-/* Variable Definitions */
-
-/* Function Declarations */
-extern void rdivide(const real32_T x[3], real32_T y, real32_T z[3]);
-#endif
-/* End of code generation (rdivide.h) */
diff --git a/apps/attitude_estimator_ekf/codegen/rtGetInf.c b/apps/attitude_estimator_ekf/codegen/rtGetInf.c deleted file mode 100755 index 34164d104..000000000 --- a/apps/attitude_estimator_ekf/codegen/rtGetInf.c +++ /dev/null @@ -1,139 +0,0 @@ -/*
- * rtGetInf.c
- *
- * Code generation for function 'attitudeKalmanfilter'
- *
- * C source code generated on: Sat Jan 19 15:25:29 2013
- *
- */
-
-/*
- * Abstract:
- * MATLAB for code generation function to initialize non-finite, Inf and MinusInf
- */
-#include "rtGetInf.h"
-#define NumBitsPerChar 8U
-
-/* Function: rtGetInf ==================================================
- * Abstract:
- * Initialize rtInf needed by the generated code.
- * Inf is initialized as non-signaling. Assumes IEEE.
- */
-real_T rtGetInf(void)
-{
- size_t bitsPerReal = sizeof(real_T) * (NumBitsPerChar);
- real_T inf = 0.0;
- if (bitsPerReal == 32U) {
- inf = rtGetInfF();
- } else {
- uint16_T one = 1U;
- enum {
- LittleEndian,
- BigEndian
- } machByteOrder = (*((uint8_T *) &one) == 1U) ? LittleEndian : BigEndian;
- switch (machByteOrder) {
- case LittleEndian:
- {
- union {
- LittleEndianIEEEDouble bitVal;
- real_T fltVal;
- } tmpVal;
-
- tmpVal.bitVal.words.wordH = 0x7FF00000U;
- tmpVal.bitVal.words.wordL = 0x00000000U;
- inf = tmpVal.fltVal;
- break;
- }
-
- case BigEndian:
- {
- union {
- BigEndianIEEEDouble bitVal;
- real_T fltVal;
- } tmpVal;
-
- tmpVal.bitVal.words.wordH = 0x7FF00000U;
- tmpVal.bitVal.words.wordL = 0x00000000U;
- inf = tmpVal.fltVal;
- break;
- }
- }
- }
-
- return inf;
-}
-
-/* Function: rtGetInfF ==================================================
- * Abstract:
- * Initialize rtInfF needed by the generated code.
- * Inf is initialized as non-signaling. Assumes IEEE.
- */
-real32_T rtGetInfF(void)
-{
- IEEESingle infF;
- infF.wordL.wordLuint = 0x7F800000U;
- return infF.wordL.wordLreal;
-}
-
-/* Function: rtGetMinusInf ==================================================
- * Abstract:
- * Initialize rtMinusInf needed by the generated code.
- * Inf is initialized as non-signaling. Assumes IEEE.
- */
-real_T rtGetMinusInf(void)
-{
- size_t bitsPerReal = sizeof(real_T) * (NumBitsPerChar);
- real_T minf = 0.0;
- if (bitsPerReal == 32U) {
- minf = rtGetMinusInfF();
- } else {
- uint16_T one = 1U;
- enum {
- LittleEndian,
- BigEndian
- } machByteOrder = (*((uint8_T *) &one) == 1U) ? LittleEndian : BigEndian;
- switch (machByteOrder) {
- case LittleEndian:
- {
- union {
- LittleEndianIEEEDouble bitVal;
- real_T fltVal;
- } tmpVal;
-
- tmpVal.bitVal.words.wordH = 0xFFF00000U;
- tmpVal.bitVal.words.wordL = 0x00000000U;
- minf = tmpVal.fltVal;
- break;
- }
-
- case BigEndian:
- {
- union {
- BigEndianIEEEDouble bitVal;
- real_T fltVal;
- } tmpVal;
-
- tmpVal.bitVal.words.wordH = 0xFFF00000U;
- tmpVal.bitVal.words.wordL = 0x00000000U;
- minf = tmpVal.fltVal;
- break;
- }
- }
- }
-
- return minf;
-}
-
-/* Function: rtGetMinusInfF ==================================================
- * Abstract:
- * Initialize rtMinusInfF needed by the generated code.
- * Inf is initialized as non-signaling. Assumes IEEE.
- */
-real32_T rtGetMinusInfF(void)
-{
- IEEESingle minfF;
- minfF.wordL.wordLuint = 0xFF800000U;
- return minfF.wordL.wordLreal;
-}
-
-/* End of code generation (rtGetInf.c) */
diff --git a/apps/attitude_estimator_ekf/codegen/rtGetInf.h b/apps/attitude_estimator_ekf/codegen/rtGetInf.h deleted file mode 100755 index 145373cd0..000000000 --- a/apps/attitude_estimator_ekf/codegen/rtGetInf.h +++ /dev/null @@ -1,23 +0,0 @@ -/*
- * rtGetInf.h
- *
- * Code generation for function 'attitudeKalmanfilter'
- *
- * C source code generated on: Sat Jan 19 15:25:29 2013
- *
- */
-
-#ifndef __RTGETINF_H__
-#define __RTGETINF_H__
-
-#include <stddef.h>
-#include "rtwtypes.h"
-#include "rt_nonfinite.h"
-
-extern real_T rtGetInf(void);
-extern real32_T rtGetInfF(void);
-extern real_T rtGetMinusInf(void);
-extern real32_T rtGetMinusInfF(void);
-
-#endif
-/* End of code generation (rtGetInf.h) */
diff --git a/apps/attitude_estimator_ekf/codegen/rtGetNaN.c b/apps/attitude_estimator_ekf/codegen/rtGetNaN.c deleted file mode 100755 index d84ca9573..000000000 --- a/apps/attitude_estimator_ekf/codegen/rtGetNaN.c +++ /dev/null @@ -1,96 +0,0 @@ -/*
- * rtGetNaN.c
- *
- * Code generation for function 'attitudeKalmanfilter'
- *
- * C source code generated on: Sat Jan 19 15:25:29 2013
- *
- */
-
-/*
- * Abstract:
- * MATLAB for code generation function to initialize non-finite, NaN
- */
-#include "rtGetNaN.h"
-#define NumBitsPerChar 8U
-
-/* Function: rtGetNaN ==================================================
- * Abstract:
- * Initialize rtNaN needed by the generated code.
- * NaN is initialized as non-signaling. Assumes IEEE.
- */
-real_T rtGetNaN(void)
-{
- size_t bitsPerReal = sizeof(real_T) * (NumBitsPerChar);
- real_T nan = 0.0;
- if (bitsPerReal == 32U) {
- nan = rtGetNaNF();
- } else {
- uint16_T one = 1U;
- enum {
- LittleEndian,
- BigEndian
- } machByteOrder = (*((uint8_T *) &one) == 1U) ? LittleEndian : BigEndian;
- switch (machByteOrder) {
- case LittleEndian:
- {
- union {
- LittleEndianIEEEDouble bitVal;
- real_T fltVal;
- } tmpVal;
-
- tmpVal.bitVal.words.wordH = 0xFFF80000U;
- tmpVal.bitVal.words.wordL = 0x00000000U;
- nan = tmpVal.fltVal;
- break;
- }
-
- case BigEndian:
- {
- union {
- BigEndianIEEEDouble bitVal;
- real_T fltVal;
- } tmpVal;
-
- tmpVal.bitVal.words.wordH = 0x7FFFFFFFU;
- tmpVal.bitVal.words.wordL = 0xFFFFFFFFU;
- nan = tmpVal.fltVal;
- break;
- }
- }
- }
-
- return nan;
-}
-
-/* Function: rtGetNaNF ==================================================
- * Abstract:
- * Initialize rtNaNF needed by the generated code.
- * NaN is initialized as non-signaling. Assumes IEEE.
- */
-real32_T rtGetNaNF(void)
-{
- IEEESingle nanF = { { 0 } };
- uint16_T one = 1U;
- enum {
- LittleEndian,
- BigEndian
- } machByteOrder = (*((uint8_T *) &one) == 1U) ? LittleEndian : BigEndian;
- switch (machByteOrder) {
- case LittleEndian:
- {
- nanF.wordL.wordLuint = 0xFFC00000U;
- break;
- }
-
- case BigEndian:
- {
- nanF.wordL.wordLuint = 0x7FFFFFFFU;
- break;
- }
- }
-
- return nanF.wordL.wordLreal;
-}
-
-/* End of code generation (rtGetNaN.c) */
diff --git a/apps/attitude_estimator_ekf/codegen/rtGetNaN.h b/apps/attitude_estimator_ekf/codegen/rtGetNaN.h deleted file mode 100755 index 65fdaa96f..000000000 --- a/apps/attitude_estimator_ekf/codegen/rtGetNaN.h +++ /dev/null @@ -1,21 +0,0 @@ -/*
- * rtGetNaN.h
- *
- * Code generation for function 'attitudeKalmanfilter'
- *
- * C source code generated on: Sat Jan 19 15:25:29 2013
- *
- */
-
-#ifndef __RTGETNAN_H__
-#define __RTGETNAN_H__
-
-#include <stddef.h>
-#include "rtwtypes.h"
-#include "rt_nonfinite.h"
-
-extern real_T rtGetNaN(void);
-extern real32_T rtGetNaNF(void);
-
-#endif
-/* End of code generation (rtGetNaN.h) */
diff --git a/apps/attitude_estimator_ekf/codegen/rt_defines.h b/apps/attitude_estimator_ekf/codegen/rt_defines.h deleted file mode 100755 index 356498363..000000000 --- a/apps/attitude_estimator_ekf/codegen/rt_defines.h +++ /dev/null @@ -1,24 +0,0 @@ -/*
- * rt_defines.h
- *
- * Code generation for function 'attitudeKalmanfilter'
- *
- * C source code generated on: Sat Jan 19 15:25:29 2013
- *
- */
-
-#ifndef __RT_DEFINES_H__
-#define __RT_DEFINES_H__
-
-#include <stdlib.h>
-
-#define RT_PI 3.14159265358979323846
-#define RT_PIF 3.1415927F
-#define RT_LN_10 2.30258509299404568402
-#define RT_LN_10F 2.3025851F
-#define RT_LOG10E 0.43429448190325182765
-#define RT_LOG10EF 0.43429449F
-#define RT_E 2.7182818284590452354
-#define RT_EF 2.7182817F
-#endif
-/* End of code generation (rt_defines.h) */
diff --git a/apps/attitude_estimator_ekf/codegen/rt_nonfinite.c b/apps/attitude_estimator_ekf/codegen/rt_nonfinite.c deleted file mode 100755 index 303d1d9d2..000000000 --- a/apps/attitude_estimator_ekf/codegen/rt_nonfinite.c +++ /dev/null @@ -1,87 +0,0 @@ -/*
- * rt_nonfinite.c
- *
- * Code generation for function 'attitudeKalmanfilter'
- *
- * C source code generated on: Sat Jan 19 15:25:29 2013
- *
- */
-
-/*
- * Abstract:
- * MATLAB for code generation function to initialize non-finites,
- * (Inf, NaN and -Inf).
- */
-#include "rt_nonfinite.h"
-#include "rtGetNaN.h"
-#include "rtGetInf.h"
-
-real_T rtInf;
-real_T rtMinusInf;
-real_T rtNaN;
-real32_T rtInfF;
-real32_T rtMinusInfF;
-real32_T rtNaNF;
-
-/* Function: rt_InitInfAndNaN ==================================================
- * Abstract:
- * Initialize the rtInf, rtMinusInf, and rtNaN needed by the
- * generated code. NaN is initialized as non-signaling. Assumes IEEE.
- */
-void rt_InitInfAndNaN(size_t realSize)
-{
- (void) (realSize);
- rtNaN = rtGetNaN();
- rtNaNF = rtGetNaNF();
- rtInf = rtGetInf();
- rtInfF = rtGetInfF();
- rtMinusInf = rtGetMinusInf();
- rtMinusInfF = rtGetMinusInfF();
-}
-
-/* Function: rtIsInf ==================================================
- * Abstract:
- * Test if value is infinite
- */
-boolean_T rtIsInf(real_T value)
-{
- return ((value==rtInf || value==rtMinusInf) ? 1U : 0U);
-}
-
-/* Function: rtIsInfF =================================================
- * Abstract:
- * Test if single-precision value is infinite
- */
-boolean_T rtIsInfF(real32_T value)
-{
- return(((value)==rtInfF || (value)==rtMinusInfF) ? 1U : 0U);
-}
-
-/* Function: rtIsNaN ==================================================
- * Abstract:
- * Test if value is not a number
- */
-boolean_T rtIsNaN(real_T value)
-{
-#if defined(_MSC_VER) && (_MSC_VER <= 1200)
- return _isnan(value)? TRUE:FALSE;
-#else
- return (value!=value)? 1U:0U;
-#endif
-}
-
-/* Function: rtIsNaNF =================================================
- * Abstract:
- * Test if single-precision value is not a number
- */
-boolean_T rtIsNaNF(real32_T value)
-{
-#if defined(_MSC_VER) && (_MSC_VER <= 1200)
- return _isnan((real_T)value)? true:false;
-#else
- return (value!=value)? 1U:0U;
-#endif
-}
-
-
-/* End of code generation (rt_nonfinite.c) */
diff --git a/apps/attitude_estimator_ekf/codegen/rt_nonfinite.h b/apps/attitude_estimator_ekf/codegen/rt_nonfinite.h deleted file mode 100755 index bd56b30d9..000000000 --- a/apps/attitude_estimator_ekf/codegen/rt_nonfinite.h +++ /dev/null @@ -1,53 +0,0 @@ -/*
- * rt_nonfinite.h
- *
- * Code generation for function 'attitudeKalmanfilter'
- *
- * C source code generated on: Sat Jan 19 15:25:29 2013
- *
- */
-
-#ifndef __RT_NONFINITE_H__
-#define __RT_NONFINITE_H__
-
-#if defined(_MSC_VER) && (_MSC_VER <= 1200)
-#include <float.h>
-#endif
-#include <stddef.h>
-#include "rtwtypes.h"
-
-extern real_T rtInf;
-extern real_T rtMinusInf;
-extern real_T rtNaN;
-extern real32_T rtInfF;
-extern real32_T rtMinusInfF;
-extern real32_T rtNaNF;
-extern void rt_InitInfAndNaN(size_t realSize);
-extern boolean_T rtIsInf(real_T value);
-extern boolean_T rtIsInfF(real32_T value);
-extern boolean_T rtIsNaN(real_T value);
-extern boolean_T rtIsNaNF(real32_T value);
-
-typedef struct {
- struct {
- uint32_T wordH;
- uint32_T wordL;
- } words;
-} BigEndianIEEEDouble;
-
-typedef struct {
- struct {
- uint32_T wordL;
- uint32_T wordH;
- } words;
-} LittleEndianIEEEDouble;
-
-typedef struct {
- union {
- real32_T wordLreal;
- uint32_T wordLuint;
- } wordL;
-} IEEESingle;
-
-#endif
-/* End of code generation (rt_nonfinite.h) */
diff --git a/apps/attitude_estimator_ekf/codegen/rtwtypes.h b/apps/attitude_estimator_ekf/codegen/rtwtypes.h deleted file mode 100755 index 9a5c96267..000000000 --- a/apps/attitude_estimator_ekf/codegen/rtwtypes.h +++ /dev/null @@ -1,159 +0,0 @@ -/*
- * rtwtypes.h
- *
- * Code generation for function 'attitudeKalmanfilter'
- *
- * C source code generated on: Sat Jan 19 15:25:29 2013
- *
- */
-
-#ifndef __RTWTYPES_H__
-#define __RTWTYPES_H__
-#ifndef TRUE
-# define TRUE (1U)
-#endif
-#ifndef FALSE
-# define FALSE (0U)
-#endif
-#ifndef __TMWTYPES__
-#define __TMWTYPES__
-
-#include <limits.h>
-
-/*=======================================================================*
- * Target hardware information
- * Device type: Generic->MATLAB Host Computer
- * Number of bits: char: 8 short: 16 int: 32
- * long: 32 native word size: 32
- * Byte ordering: LittleEndian
- * Signed integer division rounds to: Zero
- * Shift right on a signed integer as arithmetic shift: on
- *=======================================================================*/
-
-/*=======================================================================*
- * Fixed width word size data types: *
- * int8_T, int16_T, int32_T - signed 8, 16, or 32 bit integers *
- * uint8_T, uint16_T, uint32_T - unsigned 8, 16, or 32 bit integers *
- * real32_T, real64_T - 32 and 64 bit floating point numbers *
- *=======================================================================*/
-
-typedef signed char int8_T;
-typedef unsigned char uint8_T;
-typedef short int16_T;
-typedef unsigned short uint16_T;
-typedef int int32_T;
-typedef unsigned int uint32_T;
-typedef float real32_T;
-typedef double real64_T;
-
-/*===========================================================================*
- * Generic type definitions: real_T, time_T, boolean_T, int_T, uint_T, *
- * ulong_T, char_T and byte_T. *
- *===========================================================================*/
-
-typedef double real_T;
-typedef double time_T;
-typedef unsigned char boolean_T;
-typedef int int_T;
-typedef unsigned int uint_T;
-typedef unsigned long ulong_T;
-typedef char char_T;
-typedef char_T byte_T;
-
-/*===========================================================================*
- * Complex number type definitions *
- *===========================================================================*/
-#define CREAL_T
- typedef struct {
- real32_T re;
- real32_T im;
- } creal32_T;
-
- typedef struct {
- real64_T re;
- real64_T im;
- } creal64_T;
-
- typedef struct {
- real_T re;
- real_T im;
- } creal_T;
-
- typedef struct {
- int8_T re;
- int8_T im;
- } cint8_T;
-
- typedef struct {
- uint8_T re;
- uint8_T im;
- } cuint8_T;
-
- typedef struct {
- int16_T re;
- int16_T im;
- } cint16_T;
-
- typedef struct {
- uint16_T re;
- uint16_T im;
- } cuint16_T;
-
- typedef struct {
- int32_T re;
- int32_T im;
- } cint32_T;
-
- typedef struct {
- uint32_T re;
- uint32_T im;
- } cuint32_T;
-
-
-/*=======================================================================*
- * Min and Max: *
- * int8_T, int16_T, int32_T - signed 8, 16, or 32 bit integers *
- * uint8_T, uint16_T, uint32_T - unsigned 8, 16, or 32 bit integers *
- *=======================================================================*/
-
-#define MAX_int8_T ((int8_T)(127))
-#define MIN_int8_T ((int8_T)(-128))
-#define MAX_uint8_T ((uint8_T)(255))
-#define MIN_uint8_T ((uint8_T)(0))
-#define MAX_int16_T ((int16_T)(32767))
-#define MIN_int16_T ((int16_T)(-32768))
-#define MAX_uint16_T ((uint16_T)(65535))
-#define MIN_uint16_T ((uint16_T)(0))
-#define MAX_int32_T ((int32_T)(2147483647))
-#define MIN_int32_T ((int32_T)(-2147483647-1))
-#define MAX_uint32_T ((uint32_T)(0xFFFFFFFFU))
-#define MIN_uint32_T ((uint32_T)(0))
-
-/* Logical type definitions */
-#if !defined(__cplusplus) && !defined(__true_false_are_keywords)
-# ifndef false
-# define false (0U)
-# endif
-# ifndef true
-# define true (1U)
-# endif
-#endif
-
-/*
- * MATLAB for code generation assumes the code is compiled on a target using a 2's compliment representation
- * for signed integer values.
- */
-#if ((SCHAR_MIN + 1) != -SCHAR_MAX)
-#error "This code must be compiled using a 2's complement representation for signed integer values"
-#endif
-
-/*
- * Maximum length of a MATLAB identifier (function/variable)
- * including the null-termination character. Referenced by
- * rt_logging.c and rt_matrx.c.
- */
-#define TMW_NAME_LENGTH_MAX 64
-
-#endif
-#endif
-/* End of code generation (rtwtypes.h) */
diff --git a/apps/commander/.context b/apps/commander/.context deleted file mode 100644 index e69de29bb..000000000 --- a/apps/commander/.context +++ /dev/null diff --git a/apps/commander/Makefile b/apps/commander/Makefile deleted file mode 100644 index d12697274..000000000 --- a/apps/commander/Makefile +++ /dev/null @@ -1,45 +0,0 @@ -############################################################################ -# -# Copyright (C) 2012 PX4 Development Team. All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name PX4 nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -# -# Commander application -# - -APPNAME = commander -PRIORITY = SCHED_PRIORITY_MAX - 30 -STACKSIZE = 2048 - -INCLUDES = $(TOPDIR)/../mavlink/include/mavlink - -include $(APPDIR)/mk/app.mk - diff --git a/apps/commander/calibration_routines.c b/apps/commander/calibration_routines.c deleted file mode 100644 index a26938637..000000000 --- a/apps/commander/calibration_routines.c +++ /dev/null @@ -1,219 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * Author: Lorenz Meier <lm@inf.ethz.ch> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/** - * @file calibration_routines.c - * Calibration routines implementations. - * - * @author Lorenz Meier <lm@inf.ethz.ch> - */ - -#include <math.h> - -#include "calibration_routines.h" - - -int sphere_fit_least_squares(const float x[], const float y[], const float z[], - unsigned int size, unsigned int max_iterations, float delta, float *sphere_x, float *sphere_y, float *sphere_z, float *sphere_radius) -{ - - float x_sumplain = 0.0f; - float x_sumsq = 0.0f; - float x_sumcube = 0.0f; - - float y_sumplain = 0.0f; - float y_sumsq = 0.0f; - float y_sumcube = 0.0f; - - float z_sumplain = 0.0f; - float z_sumsq = 0.0f; - float z_sumcube = 0.0f; - - float xy_sum = 0.0f; - float xz_sum = 0.0f; - float yz_sum = 0.0f; - - float x2y_sum = 0.0f; - float x2z_sum = 0.0f; - float y2x_sum = 0.0f; - float y2z_sum = 0.0f; - float z2x_sum = 0.0f; - float z2y_sum = 0.0f; - - for (unsigned int i = 0; i < size; i++) { - - float x2 = x[i] * x[i]; - float y2 = y[i] * y[i]; - float z2 = z[i] * z[i]; - - x_sumplain += x[i]; - x_sumsq += x2; - x_sumcube += x2 * x[i]; - - y_sumplain += y[i]; - y_sumsq += y2; - y_sumcube += y2 * y[i]; - - z_sumplain += z[i]; - z_sumsq += z2; - z_sumcube += z2 * z[i]; - - xy_sum += x[i] * y[i]; - xz_sum += x[i] * z[i]; - yz_sum += y[i] * z[i]; - - x2y_sum += x2 * y[i]; - x2z_sum += x2 * z[i]; - - y2x_sum += y2 * x[i]; - y2z_sum += y2 * z[i]; - - z2x_sum += z2 * x[i]; - z2y_sum += z2 * y[i]; - } - - // - //Least Squares Fit a sphere A,B,C with radius squared Rsq to 3D data - // - // P is a structure that has been computed with the data earlier. - // P.npoints is the number of elements; the length of X,Y,Z are identical. - // P's members are logically named. - // - // X[n] is the x component of point n - // Y[n] is the y component of point n - // Z[n] is the z component of point n - // - // A is the x coordiante of the sphere - // B is the y coordiante of the sphere - // C is the z coordiante of the sphere - // Rsq is the radius squared of the sphere. - // - //This method should converge; maybe 5-100 iterations or more. - // - float x_sum = x_sumplain / size; //sum( X[n] ) - float x_sum2 = x_sumsq / size; //sum( X[n]^2 ) - float x_sum3 = x_sumcube / size; //sum( X[n]^3 ) - float y_sum = y_sumplain / size; //sum( Y[n] ) - float y_sum2 = y_sumsq / size; //sum( Y[n]^2 ) - float y_sum3 = y_sumcube / size; //sum( Y[n]^3 ) - float z_sum = z_sumplain / size; //sum( Z[n] ) - float z_sum2 = z_sumsq / size; //sum( Z[n]^2 ) - float z_sum3 = z_sumcube / size; //sum( Z[n]^3 ) - - float XY = xy_sum / size; //sum( X[n] * Y[n] ) - float XZ = xz_sum / size; //sum( X[n] * Z[n] ) - float YZ = yz_sum / size; //sum( Y[n] * Z[n] ) - float X2Y = x2y_sum / size; //sum( X[n]^2 * Y[n] ) - float X2Z = x2z_sum / size; //sum( X[n]^2 * Z[n] ) - float Y2X = y2x_sum / size; //sum( Y[n]^2 * X[n] ) - float Y2Z = y2z_sum / size; //sum( Y[n]^2 * Z[n] ) - float Z2X = z2x_sum / size; //sum( Z[n]^2 * X[n] ) - float Z2Y = z2y_sum / size; //sum( Z[n]^2 * Y[n] ) - - //Reduction of multiplications - float F0 = x_sum2 + y_sum2 + z_sum2; - float F1 = 0.5f * F0; - float F2 = -8.0f * (x_sum3 + Y2X + Z2X); - float F3 = -8.0f * (X2Y + y_sum3 + Z2Y); - float F4 = -8.0f * (X2Z + Y2Z + z_sum3); - - //Set initial conditions: - float A = x_sum; - float B = y_sum; - float C = z_sum; - - //First iteration computation: - float A2 = A * A; - float B2 = B * B; - float C2 = C * C; - float QS = A2 + B2 + C2; - float QB = -2.0f * (A * x_sum + B * y_sum + C * z_sum); - - //Set initial conditions: - float Rsq = F0 + QB + QS; - - //First iteration computation: - float Q0 = 0.5f * (QS - Rsq); - float Q1 = F1 + Q0; - float Q2 = 8.0f * (QS - Rsq + QB + F0); - float aA, aB, aC, nA, nB, nC, dA, dB, dC; - - //Iterate N times, ignore stop condition. - int n = 0; - - while (n < max_iterations) { - n++; - - //Compute denominator: - aA = Q2 + 16.0f * (A2 - 2.0f * A * x_sum + x_sum2); - aB = Q2 + 16.0f * (B2 - 2.0f * B * y_sum + y_sum2); - aC = Q2 + 16.0f * (C2 - 2.0f * C * z_sum + z_sum2); - aA = (aA == 0.0f) ? 1.0f : aA; - aB = (aB == 0.0f) ? 1.0f : aB; - aC = (aC == 0.0f) ? 1.0f : aC; - - //Compute next iteration - nA = A - ((F2 + 16.0f * (B * XY + C * XZ + x_sum * (-A2 - Q0) + A * (x_sum2 + Q1 - C * z_sum - B * y_sum))) / aA); - nB = B - ((F3 + 16.0f * (A * XY + C * YZ + y_sum * (-B2 - Q0) + B * (y_sum2 + Q1 - A * x_sum - C * z_sum))) / aB); - nC = C - ((F4 + 16.0f * (A * XZ + B * YZ + z_sum * (-C2 - Q0) + C * (z_sum2 + Q1 - A * x_sum - B * y_sum))) / aC); - - //Check for stop condition - dA = (nA - A); - dB = (nB - B); - dC = (nC - C); - - if ((dA * dA + dB * dB + dC * dC) <= delta) { break; } - - //Compute next iteration's values - A = nA; - B = nB; - C = nC; - A2 = A * A; - B2 = B * B; - C2 = C * C; - QS = A2 + B2 + C2; - QB = -2.0f * (A * x_sum + B * y_sum + C * z_sum); - Rsq = F0 + QB + QS; - Q0 = 0.5f * (QS - Rsq); - Q1 = F1 + Q0; - Q2 = 8.0f * (QS - Rsq + QB + F0); - } - - *sphere_x = A; - *sphere_y = B; - *sphere_z = C; - *sphere_radius = sqrtf(Rsq); - - return 0; -} diff --git a/apps/commander/calibration_routines.h b/apps/commander/calibration_routines.h deleted file mode 100644 index e3e7fbafd..000000000 --- a/apps/commander/calibration_routines.h +++ /dev/null @@ -1,61 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * Author: Lorenz Meier <lm@inf.ethz.ch> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/** - * @file calibration_routines.h - * Calibration routines definitions. - * - * @author Lorenz Meier <lm@inf.ethz.ch> - */ - -/** - * Least-squares fit of a sphere to a set of points. - * - * Fits a sphere to a set of points on the sphere surface. - * - * @param x point coordinates on the X axis - * @param y point coordinates on the Y axis - * @param z point coordinates on the Z axis - * @param size number of points - * @param max_iterations abort if maximum number of iterations have been reached. If unsure, set to 100. - * @param delta abort if error is below delta. If unsure, set to 0 to run max_iterations times. - * @param sphere_x coordinate of the sphere center on the X axis - * @param sphere_y coordinate of the sphere center on the Y axis - * @param sphere_z coordinate of the sphere center on the Z axis - * @param sphere_radius sphere radius - * - * @return 0 on success, 1 on failure - */ -int sphere_fit_least_squares(const float x[], const float y[], const float z[], - unsigned int size, unsigned int max_iterations, float delta, float *sphere_x, float *sphere_y, float *sphere_z, float *sphere_radius);
\ No newline at end of file diff --git a/apps/commander/commander.c b/apps/commander/commander.c deleted file mode 100644 index 7c0a25f86..000000000 --- a/apps/commander/commander.c +++ /dev/null @@ -1,2181 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * Author: Petri Tanskanen <petri.tanskanen@inf.ethz.ch> - * Lorenz Meier <lm@inf.ethz.ch> - * Thomas Gubler <thomasgubler@student.ethz.ch> - * Julian Oes <joes@student.ethz.ch> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/** - * @file commander.c - * Main system state machine implementation. - * - * @author Petri Tanskanen <petri.tanskanen@inf.ethz.ch> - * @author Lorenz Meier <lm@inf.ethz.ch> - * @author Thomas Gubler <thomasgubler@student.ethz.ch> - * @author Julian Oes <joes@student.ethz.ch> - * - */ - -#include "commander.h" - -#include <nuttx/config.h> -#include <pthread.h> -#include <stdio.h> -#include <stdlib.h> -#include <stdbool.h> -#include <string.h> -#include <unistd.h> -#include <fcntl.h> -#include <errno.h> -#include <debug.h> -#include <sys/prctl.h> -#include <string.h> -#include <drivers/drv_led.h> -#include <drivers/drv_hrt.h> -#include <drivers/drv_tone_alarm.h> -#include "state_machine_helper.h" -#include "systemlib/systemlib.h" -#include <math.h> -#include <poll.h> -#include <uORB/uORB.h> -#include <uORB/topics/sensor_combined.h> -#include <uORB/topics/battery_status.h> -#include <uORB/topics/manual_control_setpoint.h> -#include <uORB/topics/offboard_control_setpoint.h> -#include <uORB/topics/home_position.h> -#include <uORB/topics/vehicle_global_position.h> -#include <uORB/topics/vehicle_local_position.h> -#include <uORB/topics/vehicle_gps_position.h> -#include <uORB/topics/vehicle_command.h> -#include <uORB/topics/subsystem_info.h> -#include <uORB/topics/actuator_controls.h> -#include <uORB/topics/parameter_update.h> -#include <uORB/topics/differential_pressure.h> -#include <mavlink/mavlink_log.h> - -#include <systemlib/param/param.h> -#include <systemlib/systemlib.h> -#include <systemlib/err.h> - -/* XXX MOVE CALIBRATION TO SENSORS APP THREAD */ -#include <drivers/drv_accel.h> -#include <drivers/drv_gyro.h> -#include <drivers/drv_mag.h> -#include <drivers/drv_baro.h> - -#include "calibration_routines.h" - - -PARAM_DEFINE_INT32(SYS_FAILSAVE_LL, 0); /**< Go into low-level failsafe after 0 ms */ -//PARAM_DEFINE_INT32(SYS_FAILSAVE_HL, 0); /**< Go into high-level failsafe after 0 ms */ -PARAM_DEFINE_FLOAT(TRIM_ROLL, 0.0f); -PARAM_DEFINE_FLOAT(TRIM_PITCH, 0.0f); -PARAM_DEFINE_FLOAT(TRIM_YAW, 0.0f); - -#include <systemlib/cpuload.h> -extern struct system_load_s system_load; - -/* Decouple update interval and hysteris counters, all depends on intervals */ -#define COMMANDER_MONITORING_INTERVAL 50000 -#define COMMANDER_MONITORING_LOOPSPERMSEC (1/(COMMANDER_MONITORING_INTERVAL/1000.0f)) -#define LOW_VOLTAGE_BATTERY_COUNTER_LIMIT (LOW_VOLTAGE_BATTERY_HYSTERESIS_TIME_MS*COMMANDER_MONITORING_LOOPSPERMSEC) -#define CRITICAL_VOLTAGE_BATTERY_COUNTER_LIMIT (CRITICAL_VOLTAGE_BATTERY_HYSTERESIS_TIME_MS*COMMANDER_MONITORING_LOOPSPERMSEC) - -#define STICK_ON_OFF_LIMIT 0.75f -#define STICK_THRUST_RANGE 1.0f -#define STICK_ON_OFF_HYSTERESIS_TIME_MS 1000 -#define STICK_ON_OFF_COUNTER_LIMIT (STICK_ON_OFF_HYSTERESIS_TIME_MS*COMMANDER_MONITORING_LOOPSPERMSEC) - -#define GPS_FIX_TYPE_2D 2 -#define GPS_FIX_TYPE_3D 3 -#define GPS_QUALITY_GOOD_HYSTERIS_TIME_MS 5000 -#define GPS_QUALITY_GOOD_COUNTER_LIMIT (GPS_QUALITY_GOOD_HYSTERIS_TIME_MS*COMMANDER_MONITORING_LOOPSPERMSEC) - -/* File descriptors */ -static int leds; -static int buzzer; -static int mavlink_fd; -static bool commander_initialized = false; -static struct vehicle_status_s current_status; /**< Main state machine */ -static orb_advert_t stat_pub; - -// static uint16_t nofix_counter = 0; -// static uint16_t gotfix_counter = 0; - -static unsigned int failsafe_lowlevel_timeout_ms; - -static bool thread_should_exit = false; /**< daemon exit flag */ -static bool thread_running = false; /**< daemon status flag */ -static int daemon_task; /**< Handle of daemon task / thread */ - -/* pthread loops */ -static void *orb_receive_loop(void *arg); - -__EXPORT int commander_main(int argc, char *argv[]); - -/** - * Mainloop of commander. - */ -int commander_thread_main(int argc, char *argv[]); - -static int buzzer_init(void); -static void buzzer_deinit(void); -static int led_init(void); -static void led_deinit(void); -static int led_toggle(int led); -static int led_on(int led); -static int led_off(int led); -static void do_gyro_calibration(int status_pub, struct vehicle_status_s *status); -static void do_mag_calibration(int status_pub, struct vehicle_status_s *status); -static void do_rc_calibration(int status_pub, struct vehicle_status_s *status); -static void do_accel_calibration(int status_pub, struct vehicle_status_s *status); -static void handle_command(int status_pub, struct vehicle_status_s *current_status, struct vehicle_command_s *cmd); - -int trigger_audio_alarm(uint8_t old_mode, uint8_t old_state, uint8_t new_mode, uint8_t new_state); - - - -/** - * Print the correct usage. - */ -static void usage(const char *reason); - -/** - * Sort calibration values. - * - * Sorts the calibration values with bubble sort. - * - * @param a The array to sort - * @param n The number of entries in the array - */ -// static void cal_bsort(float a[], int n); - -static int buzzer_init() -{ - buzzer = open("/dev/tone_alarm", O_WRONLY); - - if (buzzer < 0) { - warnx("Buzzer: open fail\n"); - return ERROR; - } - - return 0; -} - -static void buzzer_deinit() -{ - close(buzzer); -} - - -static int led_init() -{ - leds = open(LED_DEVICE_PATH, 0); - - if (leds < 0) { - warnx("LED: open fail\n"); - return ERROR; - } - - if (ioctl(leds, LED_ON, LED_BLUE) || ioctl(leds, LED_ON, LED_AMBER)) { - warnx("LED: ioctl fail\n"); - return ERROR; - } - - return 0; -} - -static void led_deinit() -{ - close(leds); -} - -static int led_toggle(int led) -{ - static int last_blue = LED_ON; - static int last_amber = LED_ON; - - if (led == LED_BLUE) last_blue = (last_blue == LED_ON) ? LED_OFF : LED_ON; - - if (led == LED_AMBER) last_amber = (last_amber == LED_ON) ? LED_OFF : LED_ON; - - return ioctl(leds, ((led == LED_BLUE) ? last_blue : last_amber), led); -} - -static int led_on(int led) -{ - return ioctl(leds, LED_ON, led); -} - -static int led_off(int led) -{ - return ioctl(leds, LED_OFF, led); -} - -enum AUDIO_PATTERN { - AUDIO_PATTERN_ERROR = 2, - AUDIO_PATTERN_NOTIFY_POSITIVE = 3, - AUDIO_PATTERN_NOTIFY_NEUTRAL = 4, - AUDIO_PATTERN_NOTIFY_NEGATIVE = 5, - AUDIO_PATTERN_NOTIFY_CHARGE = 6 -}; - -int trigger_audio_alarm(uint8_t old_mode, uint8_t old_state, uint8_t new_mode, uint8_t new_state) -{ - - /* Trigger alarm if going into any error state */ - if (((new_state == SYSTEM_STATE_GROUND_ERROR) && (old_state != SYSTEM_STATE_GROUND_ERROR)) || - ((new_state == SYSTEM_STATE_MISSION_ABORT) && (old_state != SYSTEM_STATE_MISSION_ABORT))) { - ioctl(buzzer, TONE_SET_ALARM, 0); - ioctl(buzzer, TONE_SET_ALARM, AUDIO_PATTERN_ERROR); - } - - /* Trigger neutral on arming / disarming */ - if (((new_state == SYSTEM_STATE_GROUND_READY) && (old_state != SYSTEM_STATE_GROUND_READY))) { - ioctl(buzzer, TONE_SET_ALARM, 0); - ioctl(buzzer, TONE_SET_ALARM, AUDIO_PATTERN_NOTIFY_NEUTRAL); - } - - /* Trigger Tetris on being bored */ - - return 0; -} - -void tune_confirm(void) -{ - ioctl(buzzer, TONE_SET_ALARM, 3); -} - -void tune_error(void) -{ - ioctl(buzzer, TONE_SET_ALARM, 4); -} - -void do_rc_calibration(int status_pub, struct vehicle_status_s *status) -{ - if (current_status.offboard_control_signal_lost) { - mavlink_log_critical(mavlink_fd, "TRIM CAL: ABORT. No RC signal."); - return; - } - - int sub_man = orb_subscribe(ORB_ID(manual_control_setpoint)); - struct manual_control_setpoint_s sp; - orb_copy(ORB_ID(manual_control_setpoint), sub_man, &sp); - - /* set parameters */ - - float p = sp.roll; - param_set(param_find("TRIM_ROLL"), &p); - p = sp.pitch; - param_set(param_find("TRIM_PITCH"), &p); - p = sp.yaw; - param_set(param_find("TRIM_YAW"), &p); - - /* store to permanent storage */ - /* auto-save to EEPROM */ - int save_ret = param_save_default(); - - if (save_ret != 0) { - mavlink_log_critical(mavlink_fd, "TRIM CAL: WARN: auto-save of params failed"); - } - - mavlink_log_info(mavlink_fd, "trim calibration done"); -} - -void do_mag_calibration(int status_pub, struct vehicle_status_s *status) -{ - - /* set to mag calibration mode */ - status->flag_preflight_mag_calibration = true; - state_machine_publish(status_pub, status, mavlink_fd); - - int sub_mag = orb_subscribe(ORB_ID(sensor_mag)); - struct mag_report mag; - - /* 45 seconds */ - uint64_t calibration_interval = 45 * 1000 * 1000; - - /* maximum 2000 values */ - const unsigned int calibration_maxcount = 500; - unsigned int calibration_counter = 0; - - /* limit update rate to get equally spaced measurements over time (in ms) */ - orb_set_interval(sub_mag, (calibration_interval / 1000) / calibration_maxcount); - - // XXX old cal - // * FLT_MIN is not the most negative float number, - // * but the smallest number by magnitude float can - // * represent. Use -FLT_MAX to initialize the most - // * negative number - - // float mag_max[3] = {-FLT_MAX, -FLT_MAX, -FLT_MAX}; - // float mag_min[3] = {FLT_MAX, FLT_MAX, FLT_MAX}; - - int fd = open(MAG_DEVICE_PATH, O_RDONLY); - - /* erase old calibration */ - struct mag_scale mscale_null = { - 0.0f, - 1.0f, - 0.0f, - 1.0f, - 0.0f, - 1.0f, - }; - - if (OK != ioctl(fd, MAGIOCSSCALE, (long unsigned int)&mscale_null)) { - warn("WARNING: failed to set scale / offsets for mag"); - mavlink_log_info(mavlink_fd, "failed to set scale / offsets for mag"); - } - - /* calibrate range */ - if (OK != ioctl(fd, MAGIOCCALIBRATE, fd)) { - warnx("failed to calibrate scale"); - } - - close(fd); - - /* calibrate offsets */ - - // uint64_t calibration_start = hrt_absolute_time(); - - uint64_t axis_deadline = hrt_absolute_time(); - uint64_t calibration_deadline = hrt_absolute_time() + calibration_interval; - - const char axislabels[3] = { 'X', 'Y', 'Z'}; - int axis_index = -1; - - float *x = (float *)malloc(sizeof(float) * calibration_maxcount); - float *y = (float *)malloc(sizeof(float) * calibration_maxcount); - float *z = (float *)malloc(sizeof(float) * calibration_maxcount); - - if (x == NULL || y == NULL || z == NULL) { - warnx("mag cal failed: out of memory"); - mavlink_log_info(mavlink_fd, "mag cal failed: out of memory"); - warnx("x:%p y:%p z:%p\n", x, y, z); - return; - } - - tune_confirm(); - sleep(2); - tune_confirm(); - - while (hrt_absolute_time() < calibration_deadline && - calibration_counter < calibration_maxcount) { - - /* wait blocking for new data */ - struct pollfd fds[1] = { { .fd = sub_mag, .events = POLLIN } }; - - /* user guidance */ - if (hrt_absolute_time() >= axis_deadline && - axis_index < 3) { - - axis_index++; - - char buf[50]; - sprintf(buf, "Please rotate around %c", axislabels[axis_index]); - mavlink_log_info(mavlink_fd, buf); - tune_confirm(); - - axis_deadline += calibration_interval / 3; - } - - if (!(axis_index < 3)) { - break; - } - - // int axis_left = (int64_t)axis_deadline - (int64_t)hrt_absolute_time(); - - // if ((axis_left / 1000) == 0 && axis_left > 0) { - // char buf[50]; - // sprintf(buf, "[cmd] %d seconds left for axis %c", axis_left, axislabels[axis_index]); - // mavlink_log_info(mavlink_fd, buf); - // } - - int poll_ret = poll(fds, 1, 1000); - - if (poll_ret) { - orb_copy(ORB_ID(sensor_mag), sub_mag, &mag); - - x[calibration_counter] = mag.x; - y[calibration_counter] = mag.y; - z[calibration_counter] = mag.z; - - /* get min/max values */ - - // if (mag.x < mag_min[0]) { - // mag_min[0] = mag.x; - // } - // else if (mag.x > mag_max[0]) { - // mag_max[0] = mag.x; - // } - - // if (raw.magnetometer_ga[1] < mag_min[1]) { - // mag_min[1] = raw.magnetometer_ga[1]; - // } - // else if (raw.magnetometer_ga[1] > mag_max[1]) { - // mag_max[1] = raw.magnetometer_ga[1]; - // } - - // if (raw.magnetometer_ga[2] < mag_min[2]) { - // mag_min[2] = raw.magnetometer_ga[2]; - // } - // else if (raw.magnetometer_ga[2] > mag_max[2]) { - // mag_max[2] = raw.magnetometer_ga[2]; - // } - - calibration_counter++; - - } else if (poll_ret == 0) { - /* any poll failure for 1s is a reason to abort */ - mavlink_log_info(mavlink_fd, "mag cal canceled (timed out)"); - break; - } - } - - float sphere_x; - float sphere_y; - float sphere_z; - float sphere_radius; - - sphere_fit_least_squares(x, y, z, calibration_counter, 100, 0.0f, &sphere_x, &sphere_y, &sphere_z, &sphere_radius); - - free(x); - free(y); - free(z); - - if (isfinite(sphere_x) && isfinite(sphere_y) && isfinite(sphere_z)) { - - fd = open(MAG_DEVICE_PATH, 0); - - struct mag_scale mscale; - - if (OK != ioctl(fd, MAGIOCGSCALE, (long unsigned int)&mscale)) - warn("WARNING: failed to get scale / offsets for mag"); - - mscale.x_offset = sphere_x; - mscale.y_offset = sphere_y; - mscale.z_offset = sphere_z; - - if (OK != ioctl(fd, MAGIOCSSCALE, (long unsigned int)&mscale)) - warn("WARNING: failed to set scale / offsets for mag"); - - close(fd); - - /* announce and set new offset */ - - if (param_set(param_find("SENS_MAG_XOFF"), &(mscale.x_offset))) { - warnx("Setting X mag offset failed!\n"); - } - - if (param_set(param_find("SENS_MAG_YOFF"), &(mscale.y_offset))) { - warnx("Setting Y mag offset failed!\n"); - } - - if (param_set(param_find("SENS_MAG_ZOFF"), &(mscale.z_offset))) { - warnx("Setting Z mag offset failed!\n"); - } - - if (param_set(param_find("SENS_MAG_XSCALE"), &(mscale.x_scale))) { - warnx("Setting X mag scale failed!\n"); - } - - if (param_set(param_find("SENS_MAG_YSCALE"), &(mscale.y_scale))) { - warnx("Setting Y mag scale failed!\n"); - } - - if (param_set(param_find("SENS_MAG_ZSCALE"), &(mscale.z_scale))) { - warnx("Setting Z mag scale failed!\n"); - } - - /* auto-save to EEPROM */ - int save_ret = param_save_default(); - - if (save_ret != 0) { - warn("WARNING: auto-save of params to storage failed"); - mavlink_log_info(mavlink_fd, "FAILED storing calibration"); - } - - warnx("\tscale: %.6f %.6f %.6f\n \toffset: %.6f %.6f %.6f\nradius: %.6f GA\n", - (double)mscale.x_scale, (double)mscale.y_scale, (double)mscale.z_scale, - (double)mscale.x_offset, (double)mscale.y_offset, (double)mscale.z_offset, (double)sphere_radius); - - char buf[52]; - sprintf(buf, "mag off: x:%.2f y:%.2f z:%.2f Ga", (double)mscale.x_offset, - (double)mscale.y_offset, (double)mscale.z_offset); - mavlink_log_info(mavlink_fd, buf); - - sprintf(buf, "mag scale: x:%.2f y:%.2f z:%.2f", (double)mscale.x_scale, - (double)mscale.y_scale, (double)mscale.z_scale); - mavlink_log_info(mavlink_fd, buf); - - mavlink_log_info(mavlink_fd, "mag calibration done"); - - tune_confirm(); - sleep(2); - tune_confirm(); - sleep(2); - /* third beep by cal end routine */ - - } else { - mavlink_log_info(mavlink_fd, "mag calibration FAILED (NaN in sphere fit)"); - } - - /* disable calibration mode */ - status->flag_preflight_mag_calibration = false; - state_machine_publish(status_pub, status, mavlink_fd); - - close(sub_mag); -} - -void do_gyro_calibration(int status_pub, struct vehicle_status_s *status) -{ - /* set to gyro calibration mode */ - status->flag_preflight_gyro_calibration = true; - state_machine_publish(status_pub, status, mavlink_fd); - - const int calibration_count = 5000; - - int sub_sensor_combined = orb_subscribe(ORB_ID(sensor_combined)); - struct sensor_combined_s raw; - - int calibration_counter = 0; - float gyro_offset[3] = {0.0f, 0.0f, 0.0f}; - - /* set offsets to zero */ - int fd = open(GYRO_DEVICE_PATH, 0); - struct gyro_scale gscale_null = { - 0.0f, - 1.0f, - 0.0f, - 1.0f, - 0.0f, - 1.0f, - }; - - if (OK != ioctl(fd, GYROIOCSSCALE, (long unsigned int)&gscale_null)) - warn("WARNING: failed to set scale / offsets for gyro"); - - close(fd); - - while (calibration_counter < calibration_count) { - - /* wait blocking for new data */ - struct pollfd fds[1] = { { .fd = sub_sensor_combined, .events = POLLIN } }; - - int poll_ret = poll(fds, 1, 1000); - - if (poll_ret) { - orb_copy(ORB_ID(sensor_combined), sub_sensor_combined, &raw); - gyro_offset[0] += raw.gyro_rad_s[0]; - gyro_offset[1] += raw.gyro_rad_s[1]; - gyro_offset[2] += raw.gyro_rad_s[2]; - calibration_counter++; - - } else if (poll_ret == 0) { - /* any poll failure for 1s is a reason to abort */ - mavlink_log_info(mavlink_fd, "gyro calibration aborted, retry"); - return; - } - } - - gyro_offset[0] = gyro_offset[0] / calibration_count; - gyro_offset[1] = gyro_offset[1] / calibration_count; - gyro_offset[2] = gyro_offset[2] / calibration_count; - - /* exit gyro calibration mode */ - status->flag_preflight_gyro_calibration = false; - state_machine_publish(status_pub, status, mavlink_fd); - - if (isfinite(gyro_offset[0]) && isfinite(gyro_offset[1]) && isfinite(gyro_offset[2])) { - - if (param_set(param_find("SENS_GYRO_XOFF"), &(gyro_offset[0])) - || param_set(param_find("SENS_GYRO_YOFF"), &(gyro_offset[1])) - || param_set(param_find("SENS_GYRO_ZOFF"), &(gyro_offset[2]))) { - mavlink_log_critical(mavlink_fd, "Setting gyro offsets failed!"); - } - - /* set offsets to actual value */ - fd = open(GYRO_DEVICE_PATH, 0); - struct gyro_scale gscale = { - gyro_offset[0], - 1.0f, - gyro_offset[1], - 1.0f, - gyro_offset[2], - 1.0f, - }; - - if (OK != ioctl(fd, GYROIOCSSCALE, (long unsigned int)&gscale)) - warn("WARNING: failed to set scale / offsets for gyro"); - - close(fd); - - /* auto-save to EEPROM */ - int save_ret = param_save_default(); - - if (save_ret != 0) { - warn("WARNING: auto-save of params to storage failed"); - } - - // char buf[50]; - // sprintf(buf, "cal: x:%8.4f y:%8.4f z:%8.4f", (double)gyro_offset[0], (double)gyro_offset[1], (double)gyro_offset[2]); - // mavlink_log_info(mavlink_fd, buf); - mavlink_log_info(mavlink_fd, "gyro calibration done"); - - tune_confirm(); - sleep(2); - tune_confirm(); - sleep(2); - /* third beep by cal end routine */ - - } else { - mavlink_log_info(mavlink_fd, "gyro calibration FAILED (NaN)"); - } - - close(sub_sensor_combined); -} - -void do_accel_calibration(int status_pub, struct vehicle_status_s *status) -{ - /* announce change */ - - mavlink_log_info(mavlink_fd, "keep it level and still"); - /* set to accel calibration mode */ - status->flag_preflight_accel_calibration = true; - state_machine_publish(status_pub, status, mavlink_fd); - - const int calibration_count = 2500; - - int sub_sensor_combined = orb_subscribe(ORB_ID(sensor_combined)); - struct sensor_combined_s raw; - - int calibration_counter = 0; - float accel_offset[3] = {0.0f, 0.0f, 0.0f}; - - int fd = open(ACCEL_DEVICE_PATH, 0); - struct accel_scale ascale_null = { - 0.0f, - 1.0f, - 0.0f, - 1.0f, - 0.0f, - 1.0f, - }; - - if (OK != ioctl(fd, ACCELIOCSSCALE, (long unsigned int)&ascale_null)) - warn("WARNING: failed to set scale / offsets for accel"); - - close(fd); - - while (calibration_counter < calibration_count) { - - /* wait blocking for new data */ - struct pollfd fds[1] = { { .fd = sub_sensor_combined, .events = POLLIN } }; - - int poll_ret = poll(fds, 1, 1000); - - if (poll_ret) { - orb_copy(ORB_ID(sensor_combined), sub_sensor_combined, &raw); - accel_offset[0] += raw.accelerometer_m_s2[0]; - accel_offset[1] += raw.accelerometer_m_s2[1]; - accel_offset[2] += raw.accelerometer_m_s2[2]; - calibration_counter++; - - } else if (poll_ret == 0) { - /* any poll failure for 1s is a reason to abort */ - mavlink_log_info(mavlink_fd, "acceleration calibration aborted"); - return; - } - } - - accel_offset[0] = accel_offset[0] / calibration_count; - accel_offset[1] = accel_offset[1] / calibration_count; - accel_offset[2] = accel_offset[2] / calibration_count; - - if (isfinite(accel_offset[0]) && isfinite(accel_offset[1]) && isfinite(accel_offset[2])) { - - /* add the removed length from x / y to z, since we induce a scaling issue else */ - float total_len = sqrtf(accel_offset[0] * accel_offset[0] + accel_offset[1] * accel_offset[1] + accel_offset[2] * accel_offset[2]); - - /* if length is correct, zero results here */ - accel_offset[2] = accel_offset[2] + total_len; - - float scale = 9.80665f / total_len; - - if (param_set(param_find("SENS_ACC_XOFF"), &(accel_offset[0])) - || param_set(param_find("SENS_ACC_YOFF"), &(accel_offset[1])) - || param_set(param_find("SENS_ACC_ZOFF"), &(accel_offset[2])) - || param_set(param_find("SENS_ACC_XSCALE"), &(scale)) - || param_set(param_find("SENS_ACC_YSCALE"), &(scale)) - || param_set(param_find("SENS_ACC_ZSCALE"), &(scale))) { - mavlink_log_critical(mavlink_fd, "Setting offs or scale failed!"); - } - - fd = open(ACCEL_DEVICE_PATH, 0); - struct accel_scale ascale = { - accel_offset[0], - scale, - accel_offset[1], - scale, - accel_offset[2], - scale, - }; - - if (OK != ioctl(fd, ACCELIOCSSCALE, (long unsigned int)&ascale)) - warn("WARNING: failed to set scale / offsets for accel"); - - close(fd); - - /* auto-save to EEPROM */ - int save_ret = param_save_default(); - - if (save_ret != 0) { - warn("WARNING: auto-save of params to storage failed"); - } - - //char buf[50]; - //sprintf(buf, "[cmd] accel cal: x:%8.4f y:%8.4f z:%8.4f\n", (double)accel_offset[0], (double)accel_offset[1], (double)accel_offset[2]); - //mavlink_log_info(mavlink_fd, buf); - mavlink_log_info(mavlink_fd, "accel calibration done"); - - tune_confirm(); - sleep(2); - tune_confirm(); - sleep(2); - /* third beep by cal end routine */ - - } else { - mavlink_log_info(mavlink_fd, "accel calibration FAILED (NaN)"); - } - - /* exit accel calibration mode */ - status->flag_preflight_accel_calibration = false; - state_machine_publish(status_pub, status, mavlink_fd); - - close(sub_sensor_combined); -} - -void do_airspeed_calibration(int status_pub, struct vehicle_status_s *status) -{ - /* announce change */ - - mavlink_log_info(mavlink_fd, "keep it still"); - /* set to accel calibration mode */ - status->flag_preflight_airspeed_calibration = true; - state_machine_publish(status_pub, status, mavlink_fd); - - const int calibration_count = 2500; - - int sub_differential_pressure = orb_subscribe(ORB_ID(differential_pressure)); - struct differential_pressure_s differential_pressure; - - int calibration_counter = 0; - float airspeed_offset = 0.0f; - - while (calibration_counter < calibration_count) { - - /* wait blocking for new data */ - struct pollfd fds[1] = { { .fd = sub_differential_pressure, .events = POLLIN } }; - - int poll_ret = poll(fds, 1, 1000); - - if (poll_ret) { - orb_copy(ORB_ID(differential_pressure), sub_differential_pressure, &differential_pressure); - airspeed_offset += differential_pressure.voltage; - calibration_counter++; - - } else if (poll_ret == 0) { - /* any poll failure for 1s is a reason to abort */ - mavlink_log_info(mavlink_fd, "airspeed calibration aborted"); - return; - } - } - - airspeed_offset = airspeed_offset / calibration_count; - - if (isfinite(airspeed_offset)) { - - if (param_set(param_find("SENS_VAIR_OFF"), &(airspeed_offset))) { - mavlink_log_critical(mavlink_fd, "Setting offs failed!"); - } - - /* auto-save to EEPROM */ - int save_ret = param_save_default(); - - if (save_ret != 0) { - warn("WARNING: auto-save of params to storage failed"); - } - - //char buf[50]; - //sprintf(buf, "[cmd] accel cal: x:%8.4f y:%8.4f z:%8.4f\n", (double)accel_offset[0], (double)accel_offset[1], (double)accel_offset[2]); - //mavlink_log_info(mavlink_fd, buf); - mavlink_log_info(mavlink_fd, "airspeed calibration done"); - - tune_confirm(); - sleep(2); - tune_confirm(); - sleep(2); - /* third beep by cal end routine */ - - } else { - mavlink_log_info(mavlink_fd, "airspeed calibration FAILED (NaN)"); - } - - /* exit airspeed calibration mode */ - status->flag_preflight_airspeed_calibration = false; - state_machine_publish(status_pub, status, mavlink_fd); - - close(sub_differential_pressure); -} - - - -void handle_command(int status_pub, struct vehicle_status_s *current_vehicle_status, struct vehicle_command_s *cmd) -{ - /* result of the command */ - uint8_t result = VEHICLE_CMD_RESULT_UNSUPPORTED; - - /* announce command handling */ - tune_confirm(); - - - /* supported command handling start */ - - /* request to set different system mode */ - switch (cmd->command) { - case VEHICLE_CMD_DO_SET_MODE: { - if (OK == update_state_machine_mode_request(status_pub, current_vehicle_status, mavlink_fd, (uint8_t)cmd->param1)) { - result = VEHICLE_CMD_RESULT_ACCEPTED; - - } else { - result = VEHICLE_CMD_RESULT_DENIED; - } - } - break; - - case VEHICLE_CMD_COMPONENT_ARM_DISARM: { - /* request to arm */ - if ((int)cmd->param1 == 1) { - if (OK == update_state_machine_mode_request(status_pub, current_vehicle_status, mavlink_fd, VEHICLE_MODE_FLAG_SAFETY_ARMED)) { - result = VEHICLE_CMD_RESULT_ACCEPTED; - - } else { - result = VEHICLE_CMD_RESULT_DENIED; - } - - /* request to disarm */ - - } else if ((int)cmd->param1 == 0) { - if (OK == update_state_machine_mode_request(status_pub, current_vehicle_status, mavlink_fd, VEHICLE_MODE_FLAG_SAFETY_ARMED)) { - result = VEHICLE_CMD_RESULT_ACCEPTED; - - } else { - result = VEHICLE_CMD_RESULT_DENIED; - } - } - } - break; - - /* request for an autopilot reboot */ - case VEHICLE_CMD_PREFLIGHT_REBOOT_SHUTDOWN: { - if ((int)cmd->param1 == 1) { - if (OK == do_state_update(status_pub, current_vehicle_status, mavlink_fd, SYSTEM_STATE_REBOOT)) { - /* SPECIAL CASE: SYSTEM WILL NEVER RETURN HERE */ - result = VEHICLE_CMD_RESULT_ACCEPTED; - - } else { - /* system may return here */ - result = VEHICLE_CMD_RESULT_DENIED; - } - } - } - break; - -// /* request to land */ -// case VEHICLE_CMD_NAV_LAND: -// { -// //TODO: add check if landing possible -// //TODO: add landing maneuver -// -// if (0 == update_state_machine_custom_mode_request(status_pub, current_vehicle_status, SYSTEM_STATE_ARMED)) { -// result = VEHICLE_CMD_RESULT_ACCEPTED; -// } } -// break; -// -// /* request to takeoff */ -// case VEHICLE_CMD_NAV_TAKEOFF: -// { -// //TODO: add check if takeoff possible -// //TODO: add takeoff maneuver -// -// if (0 == update_state_machine_custom_mode_request(status_pub, current_vehicle_status, SYSTEM_STATE_AUTO)) { -// result = VEHICLE_CMD_RESULT_ACCEPTED; -// } -// } -// break; -// - /* preflight calibration */ - case VEHICLE_CMD_PREFLIGHT_CALIBRATION: { - bool handled = false; - - /* gyro calibration */ - if ((int)(cmd->param1) == 1) { - /* transition to calibration state */ - do_state_update(status_pub, ¤t_status, mavlink_fd, SYSTEM_STATE_PREFLIGHT); - - if (current_status.state_machine == SYSTEM_STATE_PREFLIGHT) { - mavlink_log_info(mavlink_fd, "starting gyro cal"); - tune_confirm(); - do_gyro_calibration(status_pub, ¤t_status); - mavlink_log_info(mavlink_fd, "finished gyro cal"); - tune_confirm(); - do_state_update(status_pub, ¤t_status, mavlink_fd, SYSTEM_STATE_STANDBY); - result = VEHICLE_CMD_RESULT_ACCEPTED; - - } else { - mavlink_log_critical(mavlink_fd, "REJECTING gyro cal"); - result = VEHICLE_CMD_RESULT_DENIED; - } - - handled = true; - } - - /* magnetometer calibration */ - if ((int)(cmd->param2) == 1) { - /* transition to calibration state */ - do_state_update(status_pub, ¤t_status, mavlink_fd, SYSTEM_STATE_PREFLIGHT); - - if (current_status.state_machine == SYSTEM_STATE_PREFLIGHT) { - mavlink_log_info(mavlink_fd, "starting mag cal"); - tune_confirm(); - do_mag_calibration(status_pub, ¤t_status); - mavlink_log_info(mavlink_fd, "finished mag cal"); - tune_confirm(); - do_state_update(status_pub, ¤t_status, mavlink_fd, SYSTEM_STATE_STANDBY); - result = VEHICLE_CMD_RESULT_ACCEPTED; - - } else { - mavlink_log_critical(mavlink_fd, "REJECTING mag cal"); - result = VEHICLE_CMD_RESULT_DENIED; - } - - handled = true; - } - - /* zero-altitude pressure calibration */ - if ((int)(cmd->param3) == 1) { - /* transition to calibration state */ - do_state_update(status_pub, ¤t_status, mavlink_fd, SYSTEM_STATE_PREFLIGHT); - - if (current_status.state_machine == SYSTEM_STATE_PREFLIGHT) { - mavlink_log_info(mavlink_fd, "zero altitude cal. not implemented"); - tune_confirm(); - - } else { - mavlink_log_critical(mavlink_fd, "REJECTING altitude calibration"); - result = VEHICLE_CMD_RESULT_DENIED; - } - - handled = true; - } - - /* trim calibration */ - if ((int)(cmd->param4) == 1) { - /* transition to calibration state */ - do_state_update(status_pub, ¤t_status, mavlink_fd, SYSTEM_STATE_PREFLIGHT); - - if (current_status.state_machine == SYSTEM_STATE_PREFLIGHT) { - mavlink_log_info(mavlink_fd, "starting trim cal"); - tune_confirm(); - do_rc_calibration(status_pub, ¤t_status); - mavlink_log_info(mavlink_fd, "finished trim cal"); - tune_confirm(); - do_state_update(status_pub, ¤t_status, mavlink_fd, SYSTEM_STATE_STANDBY); - result = VEHICLE_CMD_RESULT_ACCEPTED; - - } else { - mavlink_log_critical(mavlink_fd, "REJECTING trim cal"); - result = VEHICLE_CMD_RESULT_DENIED; - } - - handled = true; - } - - /* accel calibration */ - if ((int)(cmd->param5) == 1) { - /* transition to calibration state */ - do_state_update(status_pub, ¤t_status, mavlink_fd, SYSTEM_STATE_PREFLIGHT); - - if (current_status.state_machine == SYSTEM_STATE_PREFLIGHT) { - mavlink_log_info(mavlink_fd, "CMD starting accel cal"); - tune_confirm(); - do_accel_calibration(status_pub, ¤t_status); - tune_confirm(); - mavlink_log_info(mavlink_fd, "CMD finished accel cal"); - do_state_update(status_pub, ¤t_status, mavlink_fd, SYSTEM_STATE_STANDBY); - result = VEHICLE_CMD_RESULT_ACCEPTED; - - } else { - mavlink_log_critical(mavlink_fd, "REJECTING accel cal"); - result = VEHICLE_CMD_RESULT_DENIED; - } - - handled = true; - } - - /* airspeed calibration */ - if ((int)(cmd->param6) == 1) { //xxx: this is not defined by the mavlink protocol - /* transition to calibration state */ - do_state_update(status_pub, ¤t_status, mavlink_fd, SYSTEM_STATE_PREFLIGHT); - - if (current_status.state_machine == SYSTEM_STATE_PREFLIGHT) { - mavlink_log_info(mavlink_fd, "CMD starting airspeed cal"); - tune_confirm(); - do_airspeed_calibration(status_pub, ¤t_status); - tune_confirm(); - mavlink_log_info(mavlink_fd, "CMD finished airspeed cal"); - do_state_update(status_pub, ¤t_status, mavlink_fd, SYSTEM_STATE_STANDBY); - result = VEHICLE_CMD_RESULT_ACCEPTED; - - } else { - mavlink_log_critical(mavlink_fd, "REJECTING airspeed cal"); - result = VEHICLE_CMD_RESULT_DENIED; - } - - handled = true; - } - - /* none found */ - if (!handled) { - //warnx("refusing unsupported calibration request\n"); - mavlink_log_critical(mavlink_fd, "CMD refusing unsup. calib. request"); - result = VEHICLE_CMD_RESULT_UNSUPPORTED; - } - } - break; - - case VEHICLE_CMD_PREFLIGHT_STORAGE: { - if (current_status.flag_system_armed && - ((current_status.system_type == VEHICLE_TYPE_QUADROTOR) || - (current_status.system_type == VEHICLE_TYPE_HEXAROTOR) || - (current_status.system_type == VEHICLE_TYPE_OCTOROTOR))) { - /* do not perform expensive memory tasks on multirotors in flight */ - // XXX this is over-safe, as soon as cmd is in low prio thread this can be allowed - mavlink_log_info(mavlink_fd, "REJECTING save cmd while multicopter armed"); - - } else { - - // XXX move this to LOW PRIO THREAD of commander app - /* Read all parameters from EEPROM to RAM */ - - if (((int)(cmd->param1)) == 0) { - - /* read all parameters from EEPROM to RAM */ - int read_ret = param_load_default(); - - if (read_ret == OK) { - //warnx("[mavlink pm] Loaded EEPROM params in RAM\n"); - mavlink_log_info(mavlink_fd, "OK loading params from"); - mavlink_log_info(mavlink_fd, param_get_default_file()); - result = VEHICLE_CMD_RESULT_ACCEPTED; - - } else if (read_ret == 1) { - mavlink_log_info(mavlink_fd, "OK no changes in"); - mavlink_log_info(mavlink_fd, param_get_default_file()); - result = VEHICLE_CMD_RESULT_ACCEPTED; - - } else { - if (read_ret < -1) { - mavlink_log_info(mavlink_fd, "ERR loading params from"); - mavlink_log_info(mavlink_fd, param_get_default_file()); - - } else { - mavlink_log_info(mavlink_fd, "ERR no param file named"); - mavlink_log_info(mavlink_fd, param_get_default_file()); - } - - result = VEHICLE_CMD_RESULT_FAILED; - } - - } else if (((int)(cmd->param1)) == 1) { - - /* write all parameters from RAM to EEPROM */ - int write_ret = param_save_default(); - - if (write_ret == OK) { - mavlink_log_info(mavlink_fd, "OK saved param file"); - mavlink_log_info(mavlink_fd, param_get_default_file()); - result = VEHICLE_CMD_RESULT_ACCEPTED; - - } else { - if (write_ret < -1) { - mavlink_log_info(mavlink_fd, "ERR params file does not exit:"); - mavlink_log_info(mavlink_fd, param_get_default_file()); - - } else { - mavlink_log_info(mavlink_fd, "ERR writing params to"); - mavlink_log_info(mavlink_fd, param_get_default_file()); - } - - result = VEHICLE_CMD_RESULT_FAILED; - } - - } else { - mavlink_log_info(mavlink_fd, "[pm] refusing unsupp. STOR request"); - result = VEHICLE_CMD_RESULT_UNSUPPORTED; - } - } - } - break; - - default: { - mavlink_log_critical(mavlink_fd, "[cmd] refusing unsupported command"); - result = VEHICLE_CMD_RESULT_UNSUPPORTED; - /* announce command rejection */ - ioctl(buzzer, TONE_SET_ALARM, 4); - } - break; - } - - /* supported command handling stop */ - if (result == VEHICLE_CMD_RESULT_FAILED || - result == VEHICLE_CMD_RESULT_DENIED || - result == VEHICLE_CMD_RESULT_UNSUPPORTED) { - ioctl(buzzer, TONE_SET_ALARM, 5); - - } else if (result == VEHICLE_CMD_RESULT_ACCEPTED) { - tune_confirm(); - } - - /* send any requested ACKs */ - if (cmd->confirmation > 0) { - /* send acknowledge command */ - // XXX TODO - } - -} - -static void *orb_receive_loop(void *arg) //handles status information coming from subsystems (present, enabled, health), these values do not indicate the quality (variance) of the signal -{ - /* Set thread name */ - prctl(PR_SET_NAME, "commander orb rcv", getpid()); - - /* Subscribe to command topic */ - int subsys_sub = orb_subscribe(ORB_ID(subsystem_info)); - struct subsystem_info_s info; - - struct vehicle_status_s *vstatus = (struct vehicle_status_s *)arg; - - while (!thread_should_exit) { - struct pollfd fds[1] = { { .fd = subsys_sub, .events = POLLIN } }; - - if (poll(fds, 1, 5000) == 0) { - /* timeout, but this is no problem, silently ignore */ - } else { - /* got command */ - orb_copy(ORB_ID(subsystem_info), subsys_sub, &info); - - warnx("Subsys changed: %d\n", (int)info.subsystem_type); - - /* mark / unmark as present */ - if (info.present) { - vstatus->onboard_control_sensors_present |= info.subsystem_type; - - } else { - vstatus->onboard_control_sensors_present &= ~info.subsystem_type; - } - - /* mark / unmark as enabled */ - if (info.enabled) { - vstatus->onboard_control_sensors_enabled |= info.subsystem_type; - - } else { - vstatus->onboard_control_sensors_enabled &= ~info.subsystem_type; - } - - /* mark / unmark as ok */ - if (info.ok) { - vstatus->onboard_control_sensors_health |= info.subsystem_type; - - } else { - vstatus->onboard_control_sensors_health &= ~info.subsystem_type; - } - } - } - - close(subsys_sub); - - return NULL; -} - -/* - * Provides a coarse estimate of remaining battery power. - * - * The estimate is very basic and based on decharging voltage curves. - * - * @return the estimated remaining capacity in 0..1 - */ -float battery_remaining_estimate_voltage(float voltage); - -PARAM_DEFINE_FLOAT(BAT_V_EMPTY, 3.2f); -PARAM_DEFINE_FLOAT(BAT_V_FULL, 4.05f); -PARAM_DEFINE_FLOAT(BAT_N_CELLS, 3); - -float battery_remaining_estimate_voltage(float voltage) -{ - float ret = 0; - static param_t bat_volt_empty; - static param_t bat_volt_full; - static param_t bat_n_cells; - static bool initialized = false; - static unsigned int counter = 0; - static float ncells = 3; - // XXX change cells to int (and param to INT32) - - if (!initialized) { - bat_volt_empty = param_find("BAT_V_EMPTY"); - bat_volt_full = param_find("BAT_V_FULL"); - bat_n_cells = param_find("BAT_N_CELLS"); - initialized = true; - } - - static float chemistry_voltage_empty = 3.2f; - static float chemistry_voltage_full = 4.05f; - - if (counter % 100 == 0) { - param_get(bat_volt_empty, &chemistry_voltage_empty); - param_get(bat_volt_full, &chemistry_voltage_full); - param_get(bat_n_cells, &ncells); - } - - counter++; - - ret = (voltage - ncells * chemistry_voltage_empty) / (ncells * (chemistry_voltage_full - chemistry_voltage_empty)); - - /* limit to sane values */ - ret = (ret < 0) ? 0 : ret; - ret = (ret > 1) ? 1 : ret; - return ret; -} - -static void -usage(const char *reason) -{ - if (reason) - fprintf(stderr, "%s\n", reason); - - fprintf(stderr, "usage: daemon {start|stop|status} [-p <additional params>]\n\n"); - exit(1); -} - -/** - * The daemon app only briefly exists to start - * the background job. The stack size assigned in the - * Makefile does only apply to this management task. - * - * The actual stack size should be set in the call - * to task_create(). - */ -int commander_main(int argc, char *argv[]) -{ - if (argc < 1) - usage("missing command"); - - if (!strcmp(argv[1], "start")) { - - if (thread_running) { - warnx("commander already running\n"); - /* this is not an error */ - exit(0); - } - - thread_should_exit = false; - daemon_task = task_spawn("commander", - SCHED_DEFAULT, - SCHED_PRIORITY_MAX - 40, - 3000, - commander_thread_main, - (argv) ? (const char **)&argv[2] : (const char **)NULL); - exit(0); - } - - if (!strcmp(argv[1], "stop")) { - thread_should_exit = true; - exit(0); - } - - if (!strcmp(argv[1], "status")) { - if (thread_running) { - warnx("\tcommander is running\n"); - - } else { - warnx("\tcommander not started\n"); - } - - exit(0); - } - - usage("unrecognized command"); - exit(1); -} - -int commander_thread_main(int argc, char *argv[]) -{ - /* not yet initialized */ - commander_initialized = false; - bool home_position_set = false; - - /* set parameters */ - failsafe_lowlevel_timeout_ms = 0; - param_get(param_find("SYS_FAILSAVE_LL"), &failsafe_lowlevel_timeout_ms); - - param_t _param_sys_type = param_find("MAV_TYPE"); - param_t _param_system_id = param_find("MAV_SYS_ID"); - param_t _param_component_id = param_find("MAV_COMP_ID"); - - /* welcome user */ - warnx("I am in command now!\n"); - - /* pthreads for command and subsystem info handling */ - // pthread_t command_handling_thread; - pthread_t subsystem_info_thread; - - /* initialize */ - if (led_init() != 0) { - warnx("ERROR: Failed to initialize leds\n"); - } - - if (buzzer_init() != 0) { - warnx("ERROR: Failed to initialize buzzer\n"); - } - - mavlink_fd = open(MAVLINK_LOG_DEVICE, 0); - - if (mavlink_fd < 0) { - warnx("ERROR: Failed to open MAVLink log stream, start mavlink app first.\n"); - } - - /* make sure we are in preflight state */ - memset(¤t_status, 0, sizeof(current_status)); - current_status.state_machine = SYSTEM_STATE_PREFLIGHT; - current_status.flag_system_armed = false; - /* neither manual nor offboard control commands have been received */ - current_status.offboard_control_signal_found_once = false; - current_status.rc_signal_found_once = false; - /* mark all signals lost as long as they haven't been found */ - current_status.rc_signal_lost = true; - current_status.offboard_control_signal_lost = true; - /* allow manual override initially */ - current_status.flag_external_manual_override_ok = true; - /* flag position info as bad, do not allow auto mode */ - current_status.flag_vector_flight_mode_ok = false; - /* set battery warning flag */ - current_status.battery_warning = VEHICLE_BATTERY_WARNING_NONE; - - /* advertise to ORB */ - stat_pub = orb_advertise(ORB_ID(vehicle_status), ¤t_status); - /* publish current state machine */ - state_machine_publish(stat_pub, ¤t_status, mavlink_fd); - - /* home position */ - orb_advert_t home_pub = -1; - struct home_position_s home; - memset(&home, 0, sizeof(home)); - - if (stat_pub < 0) { - warnx("ERROR: orb_advertise for topic vehicle_status failed (uorb app running?).\n"); - warnx("exiting."); - exit(ERROR); - } - - mavlink_log_info(mavlink_fd, "system is running"); - - /* create pthreads */ - pthread_attr_t subsystem_info_attr; - pthread_attr_init(&subsystem_info_attr); - pthread_attr_setstacksize(&subsystem_info_attr, 2048); - pthread_create(&subsystem_info_thread, &subsystem_info_attr, orb_receive_loop, ¤t_status); - - /* Start monitoring loop */ - uint16_t counter = 0; - uint8_t flight_env; - - /* Initialize to 0.0V */ - float battery_voltage = 0.0f; - bool battery_voltage_valid = false; - bool low_battery_voltage_actions_done = false; - bool critical_battery_voltage_actions_done = false; - uint8_t low_voltage_counter = 0; - uint16_t critical_voltage_counter = 0; - int16_t mode_switch_rc_value; - float bat_remain = 1.0f; - - uint16_t stick_off_counter = 0; - uint16_t stick_on_counter = 0; - - /* Subscribe to manual control data */ - int sp_man_sub = orb_subscribe(ORB_ID(manual_control_setpoint)); - struct manual_control_setpoint_s sp_man; - memset(&sp_man, 0, sizeof(sp_man)); - - /* Subscribe to offboard control data */ - int sp_offboard_sub = orb_subscribe(ORB_ID(offboard_control_setpoint)); - struct offboard_control_setpoint_s sp_offboard; - memset(&sp_offboard, 0, sizeof(sp_offboard)); - - int global_position_sub = orb_subscribe(ORB_ID(vehicle_global_position)); - struct vehicle_global_position_s global_position; - memset(&global_position, 0, sizeof(global_position)); - uint64_t last_global_position_time = 0; - - int local_position_sub = orb_subscribe(ORB_ID(vehicle_local_position)); - struct vehicle_local_position_s local_position; - memset(&local_position, 0, sizeof(local_position)); - uint64_t last_local_position_time = 0; - - /* - * The home position is set based on GPS only, to prevent a dependency between - * position estimator and commander. RAW GPS is more than good enough for a - * non-flying vehicle. - */ - int gps_sub = orb_subscribe(ORB_ID(vehicle_gps_position)); - struct vehicle_gps_position_s gps_position; - memset(&gps_position, 0, sizeof(gps_position)); - - int sensor_sub = orb_subscribe(ORB_ID(sensor_combined)); - struct sensor_combined_s sensors; - memset(&sensors, 0, sizeof(sensors)); - - int differential_pressure_sub = orb_subscribe(ORB_ID(differential_pressure)); - struct differential_pressure_s differential_pressure; - memset(&differential_pressure, 0, sizeof(differential_pressure)); - uint64_t last_differential_pressure_time = 0; - - /* Subscribe to command topic */ - int cmd_sub = orb_subscribe(ORB_ID(vehicle_command)); - struct vehicle_command_s cmd; - memset(&cmd, 0, sizeof(cmd)); - - /* Subscribe to parameters changed topic */ - int param_changed_sub = orb_subscribe(ORB_ID(parameter_update)); - struct parameter_update_s param_changed; - memset(¶m_changed, 0, sizeof(param_changed)); - - /* subscribe to battery topic */ - int battery_sub = orb_subscribe(ORB_ID(battery_status)); - struct battery_status_s battery; - memset(&battery, 0, sizeof(battery)); - battery.voltage_v = 0.0f; - - // uint8_t vehicle_state_previous = current_status.state_machine; - float voltage_previous = 0.0f; - - uint64_t last_idle_time = 0; - - /* now initialized */ - commander_initialized = true; - thread_running = true; - - uint64_t start_time = hrt_absolute_time(); - uint64_t failsave_ll_start_time = 0; - - bool state_changed = true; - bool param_init_forced = true; - - while (!thread_should_exit) { - - /* Get current values */ - bool new_data; - orb_check(sp_man_sub, &new_data); - - if (new_data) { - orb_copy(ORB_ID(manual_control_setpoint), sp_man_sub, &sp_man); - } - - orb_check(sp_offboard_sub, &new_data); - - if (new_data) { - orb_copy(ORB_ID(offboard_control_setpoint), sp_offboard_sub, &sp_offboard); - } - - orb_check(sensor_sub, &new_data); - - if (new_data) { - orb_copy(ORB_ID(sensor_combined), sensor_sub, &sensors); - } - - orb_check(differential_pressure_sub, &new_data); - - if (new_data) { - orb_copy(ORB_ID(differential_pressure), differential_pressure_sub, &differential_pressure); - last_differential_pressure_time = differential_pressure.timestamp; - } - - orb_check(cmd_sub, &new_data); - - if (new_data) { - /* got command */ - orb_copy(ORB_ID(vehicle_command), cmd_sub, &cmd); - - /* handle it */ - handle_command(stat_pub, ¤t_status, &cmd); - } - - /* update parameters */ - orb_check(param_changed_sub, &new_data); - - if (new_data || param_init_forced) { - param_init_forced = false; - /* parameters changed */ - orb_copy(ORB_ID(parameter_update), param_changed_sub, ¶m_changed); - - - /* update parameters */ - if (!current_status.flag_system_armed) { - if (param_get(_param_sys_type, &(current_status.system_type)) != OK) { - warnx("failed setting new system type"); - } - - /* disable manual override for all systems that rely on electronic stabilization */ - if (current_status.system_type == VEHICLE_TYPE_QUADROTOR || - current_status.system_type == VEHICLE_TYPE_HEXAROTOR || - current_status.system_type == VEHICLE_TYPE_OCTOROTOR) { - current_status.flag_external_manual_override_ok = false; - - } else { - current_status.flag_external_manual_override_ok = true; - } - - /* check and update system / component ID */ - param_get(_param_system_id, &(current_status.system_id)); - param_get(_param_component_id, &(current_status.component_id)); - - } - } - - /* update global position estimate */ - orb_check(global_position_sub, &new_data); - - if (new_data) { - /* position changed */ - orb_copy(ORB_ID(vehicle_global_position), global_position_sub, &global_position); - last_global_position_time = global_position.timestamp; - } - - /* update local position estimate */ - orb_check(local_position_sub, &new_data); - - if (new_data) { - /* position changed */ - orb_copy(ORB_ID(vehicle_local_position), local_position_sub, &local_position); - last_local_position_time = local_position.timestamp; - } - - /* update battery status */ - orb_check(battery_sub, &new_data); - if (new_data) { - orb_copy(ORB_ID(battery_status), battery_sub, &battery); - battery_voltage = battery.voltage_v; - battery_voltage_valid = true; - - /* - * Only update battery voltage estimate if system has - * been running for two and a half seconds. - */ - if (hrt_absolute_time() - start_time > 2500000) { - bat_remain = battery_remaining_estimate_voltage(battery_voltage); - } - } - - /* Slow but important 8 Hz checks */ - if (counter % ((1000000 / COMMANDER_MONITORING_INTERVAL) / 8) == 0) { - /* toggle activity (blue) led at 1 Hz in standby, 10 Hz in armed mode */ - if ((current_status.state_machine == SYSTEM_STATE_GROUND_READY || - current_status.state_machine == SYSTEM_STATE_AUTO || - current_status.state_machine == SYSTEM_STATE_MANUAL)) { - /* armed */ - led_toggle(LED_BLUE); - - } else if (counter % (1000000 / COMMANDER_MONITORING_INTERVAL) == 0) { - /* not armed */ - led_toggle(LED_BLUE); - } - - /* toggle error led at 5 Hz in HIL mode */ - if (current_status.flag_hil_enabled) { - /* hil enabled */ - led_toggle(LED_AMBER); - - } else if (bat_remain < 0.3f && (low_voltage_counter > LOW_VOLTAGE_BATTERY_COUNTER_LIMIT)) { - /* toggle error (red) at 5 Hz on low battery or error */ - led_toggle(LED_AMBER); - - } else { - // /* Constant error indication in standby mode without GPS */ - // if (!current_status.gps_valid) { - // led_on(LED_AMBER); - - // } else { - // led_off(LED_AMBER); - // } - } - - if (counter % (1000000 / COMMANDER_MONITORING_INTERVAL) == 0) { - /* compute system load */ - uint64_t interval_runtime = system_load.tasks[0].total_runtime - last_idle_time; - - if (last_idle_time > 0) - current_status.load = 1000 - (interval_runtime / 1000); //system load is time spent in non-idle - - last_idle_time = system_load.tasks[0].total_runtime; - } - } - - // // XXX Export patterns and threshold to parameters - /* Trigger audio event for low battery */ - if (bat_remain < 0.1f && battery_voltage_valid && (counter % ((1000000 / COMMANDER_MONITORING_INTERVAL) / 4) == 0)) { - /* For less than 10%, start be really annoying at 5 Hz */ - ioctl(buzzer, TONE_SET_ALARM, 0); - ioctl(buzzer, TONE_SET_ALARM, 3); - - } else if (bat_remain < 0.1f && battery_voltage_valid && (counter % ((1000000 / COMMANDER_MONITORING_INTERVAL) / 4) == 2)) { - ioctl(buzzer, TONE_SET_ALARM, 0); - - } else if (bat_remain < 0.2f && battery_voltage_valid && (counter % ((1000000 / COMMANDER_MONITORING_INTERVAL) / 2) == 0)) { - /* For less than 20%, start be slightly annoying at 1 Hz */ - ioctl(buzzer, TONE_SET_ALARM, 0); - tune_confirm(); - - } else if (bat_remain < 0.2f && battery_voltage_valid && (counter % ((1000000 / COMMANDER_MONITORING_INTERVAL) / 2) == 2)) { - ioctl(buzzer, TONE_SET_ALARM, 0); - } - - /* Check battery voltage */ - /* write to sys_status */ - if (battery_voltage_valid) { - current_status.voltage_battery = battery_voltage; - - } else { - current_status.voltage_battery = 0.0f; - } - - /* if battery voltage is getting lower, warn using buzzer, etc. */ - if (battery_voltage_valid && (bat_remain < 0.15f /* XXX MAGIC NUMBER */) && (false == low_battery_voltage_actions_done)) { //TODO: add filter, or call emergency after n measurements < VOLTAGE_BATTERY_MINIMAL_MILLIVOLTS - - if (low_voltage_counter > LOW_VOLTAGE_BATTERY_COUNTER_LIMIT) { - low_battery_voltage_actions_done = true; - mavlink_log_critical(mavlink_fd, "[cmd] WARNING! LOW BATTERY!"); - current_status.battery_warning = VEHICLE_BATTERY_WARNING_WARNING; - } - - low_voltage_counter++; - } - - /* Critical, this is rather an emergency, kill signal to sdlog and change state machine */ - else if (battery_voltage_valid && (bat_remain < 0.1f /* XXX MAGIC NUMBER */) && (false == critical_battery_voltage_actions_done && true == low_battery_voltage_actions_done)) { - if (critical_voltage_counter > CRITICAL_VOLTAGE_BATTERY_COUNTER_LIMIT) { - critical_battery_voltage_actions_done = true; - mavlink_log_critical(mavlink_fd, "[cmd] EMERGENCY! CRITICAL BATTERY!"); - current_status.battery_warning = VEHICLE_BATTERY_WARNING_ALERT; - state_machine_emergency(stat_pub, ¤t_status, mavlink_fd); - } - - critical_voltage_counter++; - - } else { - low_voltage_counter = 0; - critical_voltage_counter = 0; - } - - /* End battery voltage check */ - - - /* - * Check for valid position information. - * - * If the system has a valid position source from an onboard - * position estimator, it is safe to operate it autonomously. - * The flag_vector_flight_mode_ok flag indicates that a minimum - * set of position measurements is available. - */ - - /* store current state to reason later about a state change */ - bool vector_flight_mode_ok = current_status.flag_vector_flight_mode_ok; - bool global_pos_valid = current_status.flag_global_position_valid; - bool local_pos_valid = current_status.flag_local_position_valid; - bool airspeed_valid = current_status.flag_airspeed_valid; - - /* check for global or local position updates, set a timeout of 2s */ - if (hrt_absolute_time() - last_global_position_time < 2000000) { - current_status.flag_global_position_valid = true; - // XXX check for controller status and home position as well - - } else { - current_status.flag_global_position_valid = false; - } - - if (hrt_absolute_time() - last_local_position_time < 2000000) { - current_status.flag_local_position_valid = true; - // XXX check for controller status and home position as well - - } else { - current_status.flag_local_position_valid = false; - } - - /* Check for valid airspeed/differential pressure measurements */ - if (hrt_absolute_time() - last_differential_pressure_time < 2000000) { - current_status.flag_airspeed_valid = true; - - } else { - current_status.flag_airspeed_valid = false; - } - - /* - * Consolidate global position and local position valid flags - * for vector flight mode. - */ - if (current_status.flag_local_position_valid || - current_status.flag_global_position_valid) { - current_status.flag_vector_flight_mode_ok = true; - - } else { - current_status.flag_vector_flight_mode_ok = false; - } - - /* consolidate state change, flag as changed if required */ - if (vector_flight_mode_ok != current_status.flag_vector_flight_mode_ok || - global_pos_valid != current_status.flag_global_position_valid || - local_pos_valid != current_status.flag_local_position_valid || - airspeed_valid != current_status.flag_airspeed_valid) { - state_changed = true; - } - - /* - * Mark the position of the first position lock as return to launch (RTL) - * position. The MAV will return here on command or emergency. - * - * Conditions: - * - * 1) The system aquired position lock just now - * 2) The system has not aquired position lock before - * 3) The system is not armed (on the ground) - */ - if (!current_status.flag_valid_launch_position && - !vector_flight_mode_ok && current_status.flag_vector_flight_mode_ok && - !current_status.flag_system_armed) { - /* first time a valid position, store it and emit it */ - - // XXX implement storage and publication of RTL position - current_status.flag_valid_launch_position = true; - current_status.flag_auto_flight_mode_ok = true; - state_changed = true; - } - - if (orb_check(ORB_ID(vehicle_gps_position), &new_data)) { - - orb_copy(ORB_ID(vehicle_gps_position), gps_sub, &gps_position); - - /* check for first, long-term and valid GPS lock -> set home position */ - float hdop_m = gps_position.eph_m; - float vdop_m = gps_position.epv_m; - - /* check if gps fix is ok */ - // XXX magic number - float hdop_threshold_m = 4.0f; - float vdop_threshold_m = 8.0f; - - /* - * If horizontal dilution of precision (hdop / eph) - * and vertical diluation of precision (vdop / epv) - * are below a certain threshold (e.g. 4 m), AND - * home position is not yet set AND the last GPS - * GPS measurement is not older than two seconds AND - * the system is currently not armed, set home - * position to the current position. - */ - - if (gps_position.fix_type == GPS_FIX_TYPE_3D - && (hdop_m < hdop_threshold_m) - && (vdop_m < vdop_threshold_m) - && !home_position_set - && (hrt_absolute_time() - gps_position.timestamp_position < 2000000) - && !current_status.flag_system_armed) { - warnx("setting home position"); - - /* copy position data to uORB home message, store it locally as well */ - home.lat = gps_position.lat; - home.lon = gps_position.lon; - home.alt = gps_position.alt; - - home.eph_m = gps_position.eph_m; - home.epv_m = gps_position.epv_m; - - home.s_variance_m_s = gps_position.s_variance_m_s; - home.p_variance_m = gps_position.p_variance_m; - - /* announce new home position */ - if (home_pub > 0) { - orb_publish(ORB_ID(home_position), home_pub, &home); - } else { - home_pub = orb_advertise(ORB_ID(home_position), &home); - } - - /* mark home position as set */ - home_position_set = true; - tune_confirm(); - } - } - - /* ignore RC signals if in offboard control mode */ - if (!current_status.offboard_control_signal_found_once && sp_man.timestamp != 0) { - /* Start RC state check */ - - if ((hrt_absolute_time() - sp_man.timestamp) < 100000) { - - // /* - // * Check if manual control modes have to be switched - // */ - // if (!isfinite(sp_man.manual_mode_switch)) { - // warnx("man mode sw not finite\n"); - - // /* this switch is not properly mapped, set default */ - // if ((current_status.system_type == VEHICLE_TYPE_QUADROTOR) || - // (current_status.system_type == VEHICLE_TYPE_HEXAROTOR) || - // (current_status.system_type == VEHICLE_TYPE_OCTOROTOR)) { - - // /* assuming a rotary wing, fall back to SAS */ - // current_status.manual_control_mode = VEHICLE_MANUAL_CONTROL_MODE_SAS; - // current_status.flag_control_attitude_enabled = true; - // current_status.flag_control_rates_enabled = true; - // } else { - - // /* assuming a fixed wing, fall back to direct pass-through */ - // current_status.manual_control_mode = VEHICLE_MANUAL_CONTROL_MODE_DIRECT; - // current_status.flag_control_attitude_enabled = false; - // current_status.flag_control_rates_enabled = false; - // } - - // } else if (sp_man.manual_mode_switch < -STICK_ON_OFF_LIMIT) { - - // /* bottom stick position, set direct mode for vehicles supporting it */ - // if ((current_status.system_type == VEHICLE_TYPE_QUADROTOR) || - // (current_status.system_type == VEHICLE_TYPE_HEXAROTOR) || - // (current_status.system_type == VEHICLE_TYPE_OCTOROTOR)) { - - // /* assuming a rotary wing, fall back to SAS */ - // current_status.manual_control_mode = VEHICLE_MANUAL_CONTROL_MODE_SAS; - // current_status.flag_control_attitude_enabled = true; - // current_status.flag_control_rates_enabled = true; - // } else { - - // /* assuming a fixed wing, set to direct pass-through as requested */ - // current_status.manual_control_mode = VEHICLE_MANUAL_CONTROL_MODE_DIRECT; - // current_status.flag_control_attitude_enabled = false; - // current_status.flag_control_rates_enabled = false; - // } - - // } else if (sp_man.manual_mode_switch > STICK_ON_OFF_LIMIT) { - - // /* top stick position, set SAS for all vehicle types */ - // current_status.manual_control_mode = VEHICLE_MANUAL_CONTROL_MODE_SAS; - // current_status.flag_control_attitude_enabled = true; - // current_status.flag_control_rates_enabled = true; - - // } else { - // /* center stick position, set rate control */ - // current_status.manual_control_mode = VEHICLE_MANUAL_CONTROL_MODE_RATES; - // current_status.flag_control_attitude_enabled = false; - // current_status.flag_control_rates_enabled = true; - // } - - // warnx("man ctrl mode: %d\n", (int)current_status.manual_control_mode); - - /* - * Check if manual stability control modes have to be switched - */ - if (!isfinite(sp_man.manual_sas_switch)) { - - /* this switch is not properly mapped, set default */ - current_status.manual_sas_mode = VEHICLE_MANUAL_SAS_MODE_ROLL_PITCH_ABS_YAW_ABS; - - } else if (sp_man.manual_sas_switch < -STICK_ON_OFF_LIMIT) { - - /* bottom stick position, set altitude hold */ - current_status.manual_sas_mode = VEHICLE_MANUAL_SAS_MODE_ALTITUDE; - - } else if (sp_man.manual_sas_switch > STICK_ON_OFF_LIMIT) { - - /* top stick position */ - current_status.manual_sas_mode = VEHICLE_MANUAL_SAS_MODE_SIMPLE; - - } else { - /* center stick position, set default */ - current_status.manual_sas_mode = VEHICLE_MANUAL_SAS_MODE_ROLL_PITCH_ABS_YAW_ABS; - } - - /* - * Check if left stick is in lower left position --> switch to standby state. - * Do this only for multirotors, not for fixed wing aircraft. - */ - if (((current_status.system_type == VEHICLE_TYPE_QUADROTOR) || - (current_status.system_type == VEHICLE_TYPE_HEXAROTOR) || - (current_status.system_type == VEHICLE_TYPE_OCTOROTOR) - ) && - ((sp_man.yaw < -STICK_ON_OFF_LIMIT)) && - (sp_man.throttle < STICK_THRUST_RANGE * 0.2f)) { - if (stick_off_counter > STICK_ON_OFF_COUNTER_LIMIT) { - update_state_machine_disarm(stat_pub, ¤t_status, mavlink_fd); - stick_on_counter = 0; - - } else { - stick_off_counter++; - stick_on_counter = 0; - } - } - - /* check if left stick is in lower right position --> arm */ - if (sp_man.yaw > STICK_ON_OFF_LIMIT && sp_man.throttle < STICK_THRUST_RANGE * 0.2f) { - if (stick_on_counter > STICK_ON_OFF_COUNTER_LIMIT) { - update_state_machine_arm(stat_pub, ¤t_status, mavlink_fd); - stick_on_counter = 0; - - } else { - stick_on_counter++; - stick_off_counter = 0; - } - } - - /* check manual override switch - switch to manual or auto mode */ - if (sp_man.manual_override_switch > STICK_ON_OFF_LIMIT) { - /* enable manual override */ - update_state_machine_mode_manual(stat_pub, ¤t_status, mavlink_fd); - - } else if (sp_man.manual_override_switch < -STICK_ON_OFF_LIMIT) { - // /* check auto mode switch for correct mode */ - // if (sp_man.auto_mode_switch > STICK_ON_OFF_LIMIT) { - // /* enable guided mode */ - // update_state_machine_mode_guided(stat_pub, ¤t_status, mavlink_fd); - - // } else if (sp_man.auto_mode_switch < -STICK_ON_OFF_LIMIT) { - // XXX hardcode to auto for now - update_state_machine_mode_auto(stat_pub, ¤t_status, mavlink_fd); - - // } - - } else { - /* center stick position, set SAS for all vehicle types */ - update_state_machine_mode_stabilized(stat_pub, ¤t_status, mavlink_fd); - } - - /* handle the case where RC signal was regained */ - if (!current_status.rc_signal_found_once) { - current_status.rc_signal_found_once = true; - mavlink_log_critical(mavlink_fd, "DETECTED RC SIGNAL FIRST TIME."); - - } else { - if (current_status.rc_signal_lost) mavlink_log_critical(mavlink_fd, "[cmd] RECOVERY - RC SIGNAL GAINED!"); - } - - current_status.rc_signal_cutting_off = false; - current_status.rc_signal_lost = false; - current_status.rc_signal_lost_interval = 0; - - } else { - static uint64_t last_print_time = 0; - - /* print error message for first RC glitch and then every 5 s / 5000 ms) */ - if (!current_status.rc_signal_cutting_off || ((hrt_absolute_time() - last_print_time) > 5000000)) { - /* only complain if the offboard control is NOT active */ - current_status.rc_signal_cutting_off = true; - mavlink_log_critical(mavlink_fd, "CRITICAL - NO REMOTE SIGNAL!"); - last_print_time = hrt_absolute_time(); - } - - /* flag as lost and update interval since when the signal was lost (to initiate RTL after some time) */ - current_status.rc_signal_lost_interval = hrt_absolute_time() - sp_man.timestamp; - - /* if the RC signal is gone for a full second, consider it lost */ - if (current_status.rc_signal_lost_interval > 1000000) { - current_status.rc_signal_lost = true; - current_status.failsave_lowlevel = true; - state_changed = true; - } - - // if (hrt_absolute_time() - current_status.failsave_ll_start_time > failsafe_lowlevel_timeout_ms*1000) { - // publish_armed_status(¤t_status); - // } - } - } - - - - - /* End mode switch */ - - /* END RC state check */ - - - /* State machine update for offboard control */ - if (!current_status.rc_signal_found_once && sp_offboard.timestamp != 0) { - if ((hrt_absolute_time() - sp_offboard.timestamp) < 5000000) { - - /* decide about attitude control flag, enable in att/pos/vel */ - bool attitude_ctrl_enabled = (sp_offboard.mode == OFFBOARD_CONTROL_MODE_DIRECT_ATTITUDE || - sp_offboard.mode == OFFBOARD_CONTROL_MODE_DIRECT_VELOCITY || - sp_offboard.mode == OFFBOARD_CONTROL_MODE_DIRECT_POSITION); - - /* decide about rate control flag, enable it always XXX (for now) */ - bool rates_ctrl_enabled = true; - - /* set up control mode */ - if (current_status.flag_control_attitude_enabled != attitude_ctrl_enabled) { - current_status.flag_control_attitude_enabled = attitude_ctrl_enabled; - state_changed = true; - } - - if (current_status.flag_control_rates_enabled != rates_ctrl_enabled) { - current_status.flag_control_rates_enabled = rates_ctrl_enabled; - state_changed = true; - } - - /* handle the case where offboard control signal was regained */ - if (!current_status.offboard_control_signal_found_once) { - current_status.offboard_control_signal_found_once = true; - /* enable offboard control, disable manual input */ - current_status.flag_control_manual_enabled = false; - current_status.flag_control_offboard_enabled = true; - state_changed = true; - tune_confirm(); - - mavlink_log_critical(mavlink_fd, "DETECTED OFFBOARD SIGNAL FIRST"); - - } else { - if (current_status.offboard_control_signal_lost) { - mavlink_log_critical(mavlink_fd, "RECOVERY OFFBOARD CONTROL"); - state_changed = true; - tune_confirm(); - } - } - - current_status.offboard_control_signal_weak = false; - current_status.offboard_control_signal_lost = false; - current_status.offboard_control_signal_lost_interval = 0; - - /* arm / disarm on request */ - if (sp_offboard.armed && !current_status.flag_system_armed) { - update_state_machine_arm(stat_pub, ¤t_status, mavlink_fd); - /* switch to stabilized mode = takeoff */ - update_state_machine_mode_stabilized(stat_pub, ¤t_status, mavlink_fd); - - } else if (!sp_offboard.armed && current_status.flag_system_armed) { - update_state_machine_disarm(stat_pub, ¤t_status, mavlink_fd); - } - - } else { - static uint64_t last_print_time = 0; - - /* print error message for first RC glitch and then every 5 s / 5000 ms) */ - if (!current_status.offboard_control_signal_weak || ((hrt_absolute_time() - last_print_time) > 5000000)) { - current_status.offboard_control_signal_weak = true; - mavlink_log_critical(mavlink_fd, "CRIT:NO OFFBOARD CONTROL!"); - last_print_time = hrt_absolute_time(); - } - - /* flag as lost and update interval since when the signal was lost (to initiate RTL after some time) */ - current_status.offboard_control_signal_lost_interval = hrt_absolute_time() - sp_offboard.timestamp; - - /* if the signal is gone for 0.1 seconds, consider it lost */ - if (current_status.offboard_control_signal_lost_interval > 100000) { - current_status.offboard_control_signal_lost = true; - current_status.failsave_lowlevel_start_time = hrt_absolute_time(); - tune_confirm(); - - /* kill motors after timeout */ - if (hrt_absolute_time() - current_status.failsave_lowlevel_start_time > failsafe_lowlevel_timeout_ms * 1000) { - current_status.failsave_lowlevel = true; - state_changed = true; - } - } - } - } - - - current_status.counter++; - current_status.timestamp = hrt_absolute_time(); - - - /* If full run came back clean, transition to standby */ - if (current_status.state_machine == SYSTEM_STATE_PREFLIGHT && - current_status.flag_preflight_gyro_calibration == false && - current_status.flag_preflight_mag_calibration == false && - current_status.flag_preflight_accel_calibration == false) { - /* All ok, no calibration going on, go to standby */ - do_state_update(stat_pub, ¤t_status, mavlink_fd, SYSTEM_STATE_STANDBY); - } - - /* publish at least with 1 Hz */ - if (counter % (1000000 / COMMANDER_MONITORING_INTERVAL) == 0 || state_changed) { - publish_armed_status(¤t_status); - orb_publish(ORB_ID(vehicle_status), stat_pub, ¤t_status); - state_changed = false; - } - - /* Store old modes to detect and act on state transitions */ - voltage_previous = current_status.voltage_battery; - - fflush(stdout); - counter++; - usleep(COMMANDER_MONITORING_INTERVAL); - } - - /* wait for threads to complete */ - // pthread_join(command_handling_thread, NULL); - pthread_join(subsystem_info_thread, NULL); - - /* close fds */ - led_deinit(); - buzzer_deinit(); - close(sp_man_sub); - close(sp_offboard_sub); - close(global_position_sub); - close(sensor_sub); - close(cmd_sub); - - warnx("exiting..\n"); - fflush(stdout); - - thread_running = false; - - return 0; -} diff --git a/apps/commander/commander.h b/apps/commander/commander.h deleted file mode 100644 index 04b4e72ab..000000000 --- a/apps/commander/commander.h +++ /dev/null @@ -1,58 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * Author: Petri Tanskanen <petri.tanskanen@inf.ethz.ch> - * Lorenz Meier <lm@inf.ethz.ch> - * Thomas Gubler <thomasgubler@student.ethz.ch> - * Julian Oes <joes@student.ethz.ch> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/** - * @file commander.h - * Main system state machine definition. - * - * @author Petri Tanskanen <petri.tanskanen@inf.ethz.ch> - * @author Lorenz Meier <lm@inf.ethz.ch> - * @author Thomas Gubler <thomasgubler@student.ethz.ch> - * @author Julian Oes <joes@student.ethz.ch> - * - */ - -#ifndef COMMANDER_H_ -#define COMMANDER_H_ - -#define LOW_VOLTAGE_BATTERY_HYSTERESIS_TIME_MS 1000.0f -#define CRITICAL_VOLTAGE_BATTERY_HYSTERESIS_TIME_MS 100.0f - -void tune_confirm(void); -void tune_error(void); - -#endif /* COMMANDER_H_ */ diff --git a/apps/commander/state_machine_helper.c b/apps/commander/state_machine_helper.c deleted file mode 100644 index bea388a10..000000000 --- a/apps/commander/state_machine_helper.c +++ /dev/null @@ -1,752 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * Author: Thomas Gubler <thomasgubler@student.ethz.ch> - * Julian Oes <joes@student.ethz.ch> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/** - * @file state_machine_helper.c - * State machine helper functions implementations - */ - -#include <stdio.h> -#include <unistd.h> - -#include <uORB/uORB.h> -#include <uORB/topics/vehicle_status.h> -#include <uORB/topics/actuator_controls.h> -#include <systemlib/systemlib.h> -#include <drivers/drv_hrt.h> -#include <mavlink/mavlink_log.h> - -#include "state_machine_helper.h" - -static const char *system_state_txt[] = { - "SYSTEM_STATE_PREFLIGHT", - "SYSTEM_STATE_STANDBY", - "SYSTEM_STATE_GROUND_READY", - "SYSTEM_STATE_MANUAL", - "SYSTEM_STATE_STABILIZED", - "SYSTEM_STATE_AUTO", - "SYSTEM_STATE_MISSION_ABORT", - "SYSTEM_STATE_EMCY_LANDING", - "SYSTEM_STATE_EMCY_CUTOFF", - "SYSTEM_STATE_GROUND_ERROR", - "SYSTEM_STATE_REBOOT", - -}; - -/** - * Transition from one state to another - */ -int do_state_update(int status_pub, struct vehicle_status_s *current_status, const int mavlink_fd, commander_state_machine_t new_state) -{ - int invalid_state = false; - int ret = ERROR; - - commander_state_machine_t old_state = current_status->state_machine; - - switch (new_state) { - case SYSTEM_STATE_MISSION_ABORT: { - /* Indoor or outdoor */ - // if (flight_environment_parameter == PX4_FLIGHT_ENVIRONMENT_OUTDOOR) { - ret = do_state_update(status_pub, current_status, mavlink_fd, (commander_state_machine_t)SYSTEM_STATE_EMCY_LANDING); - - // } else { - // ret = do_state_update(status_pub, current_status, mavlink_fd, (commander_state_machine_t)SYSTEM_STATE_EMCY_CUTOFF); - // } - } - break; - - case SYSTEM_STATE_EMCY_LANDING: - /* Tell the controller to land */ - - /* set system flags according to state */ - current_status->flag_system_armed = true; - - warnx("EMERGENCY LANDING!\n"); - mavlink_log_critical(mavlink_fd, "EMERGENCY LANDING!"); - break; - - case SYSTEM_STATE_EMCY_CUTOFF: - /* Tell the controller to cutoff the motors (thrust = 0) */ - - /* set system flags according to state */ - current_status->flag_system_armed = false; - - warnx("EMERGENCY MOTOR CUTOFF!\n"); - mavlink_log_critical(mavlink_fd, "EMERGENCY MOTOR CUTOFF!"); - break; - - case SYSTEM_STATE_GROUND_ERROR: - - /* set system flags according to state */ - - /* prevent actuators from arming */ - current_status->flag_system_armed = false; - - warnx("GROUND ERROR, locking down propulsion system\n"); - mavlink_log_critical(mavlink_fd, "GROUND ERROR, locking down system"); - break; - - case SYSTEM_STATE_PREFLIGHT: - if (current_status->state_machine == SYSTEM_STATE_STANDBY - || current_status->state_machine == SYSTEM_STATE_PREFLIGHT) { - /* set system flags according to state */ - current_status->flag_system_armed = false; - mavlink_log_critical(mavlink_fd, "Switched to PREFLIGHT state"); - - } else { - invalid_state = true; - mavlink_log_critical(mavlink_fd, "REFUSED to switch to PREFLIGHT state"); - } - - break; - - case SYSTEM_STATE_REBOOT: - if (current_status->state_machine == SYSTEM_STATE_STANDBY - || current_status->state_machine == SYSTEM_STATE_PREFLIGHT - || current_status->flag_hil_enabled) { - invalid_state = false; - /* set system flags according to state */ - current_status->flag_system_armed = false; - mavlink_log_critical(mavlink_fd, "REBOOTING SYSTEM"); - usleep(500000); - up_systemreset(); - /* SPECIAL CASE: NEVER RETURNS FROM THIS FUNCTION CALL */ - - } else { - invalid_state = true; - mavlink_log_critical(mavlink_fd, "REFUSED to REBOOT"); - } - - break; - - case SYSTEM_STATE_STANDBY: - /* set system flags according to state */ - - /* standby enforces disarmed */ - current_status->flag_system_armed = false; - - mavlink_log_critical(mavlink_fd, "Switched to STANDBY state"); - break; - - case SYSTEM_STATE_GROUND_READY: - - /* set system flags according to state */ - - /* ground ready has motors / actuators armed */ - current_status->flag_system_armed = true; - - mavlink_log_critical(mavlink_fd, "Switched to GROUND READY state"); - break; - - case SYSTEM_STATE_AUTO: - - /* set system flags according to state */ - - /* auto is airborne and in auto mode, motors armed */ - current_status->flag_system_armed = true; - - mavlink_log_critical(mavlink_fd, "Switched to FLYING / AUTO mode"); - break; - - case SYSTEM_STATE_STABILIZED: - - /* set system flags according to state */ - current_status->flag_system_armed = true; - - mavlink_log_critical(mavlink_fd, "Switched to FLYING / STABILIZED mode"); - break; - - case SYSTEM_STATE_MANUAL: - - /* set system flags according to state */ - current_status->flag_system_armed = true; - - mavlink_log_critical(mavlink_fd, "Switched to FLYING / MANUAL mode"); - break; - - default: - invalid_state = true; - break; - } - - if (invalid_state == false || old_state != new_state) { - current_status->state_machine = new_state; - state_machine_publish(status_pub, current_status, mavlink_fd); - publish_armed_status(current_status); - ret = OK; - } - - if (invalid_state) { - mavlink_log_critical(mavlink_fd, "REJECTING invalid state transition"); - ret = ERROR; - } - - return ret; -} - -void state_machine_publish(int status_pub, struct vehicle_status_s *current_status, const int mavlink_fd) -{ - /* publish the new state */ - current_status->counter++; - current_status->timestamp = hrt_absolute_time(); - - /* assemble state vector based on flag values */ - if (current_status->flag_control_rates_enabled) { - current_status->onboard_control_sensors_present |= 0x400; - - } else { - current_status->onboard_control_sensors_present &= ~0x400; - } - - current_status->onboard_control_sensors_present |= (current_status->flag_control_attitude_enabled) ? 0x800 : 0; - current_status->onboard_control_sensors_present |= (current_status->flag_control_attitude_enabled) ? 0x1000 : 0; - current_status->onboard_control_sensors_present |= (current_status->flag_control_velocity_enabled || current_status->flag_control_position_enabled) ? 0x2000 : 0; - current_status->onboard_control_sensors_present |= (current_status->flag_control_velocity_enabled || current_status->flag_control_position_enabled) ? 0x4000 : 0; - - current_status->onboard_control_sensors_enabled |= (current_status->flag_control_rates_enabled) ? 0x400 : 0; - current_status->onboard_control_sensors_enabled |= (current_status->flag_control_attitude_enabled) ? 0x800 : 0; - current_status->onboard_control_sensors_enabled |= (current_status->flag_control_attitude_enabled) ? 0x1000 : 0; - current_status->onboard_control_sensors_enabled |= (current_status->flag_control_velocity_enabled || current_status->flag_control_position_enabled) ? 0x2000 : 0; - current_status->onboard_control_sensors_enabled |= (current_status->flag_control_velocity_enabled || current_status->flag_control_position_enabled) ? 0x4000 : 0; - - orb_publish(ORB_ID(vehicle_status), status_pub, current_status); - printf("[cmd] new state: %s\n", system_state_txt[current_status->state_machine]); -} - -void publish_armed_status(const struct vehicle_status_s *current_status) -{ - struct actuator_armed_s armed; - armed.armed = current_status->flag_system_armed; - /* lock down actuators if required, only in HIL */ - armed.lockdown = (current_status->flag_hil_enabled) ? true : false; - orb_advert_t armed_pub = orb_advertise(ORB_ID(actuator_armed), &armed); - orb_publish(ORB_ID(actuator_armed), armed_pub, &armed); -} - - -/* - * Private functions, update the state machine - */ -void state_machine_emergency_always_critical(int status_pub, struct vehicle_status_s *current_status, const int mavlink_fd) -{ - warnx("EMERGENCY HANDLER\n"); - /* Depending on the current state go to one of the error states */ - - if (current_status->state_machine == SYSTEM_STATE_PREFLIGHT || current_status->state_machine == SYSTEM_STATE_STANDBY || current_status->state_machine == SYSTEM_STATE_GROUND_READY) { - do_state_update(status_pub, current_status, mavlink_fd, (commander_state_machine_t)SYSTEM_STATE_GROUND_ERROR); - - } else if (current_status->state_machine == SYSTEM_STATE_AUTO || current_status->state_machine == SYSTEM_STATE_MANUAL) { - - // DO NOT abort mission - //do_state_update(status_pub, current_status, mavlink_fd, (commander_state_machine_t)SYSTEM_STATE_MISSION_ABORT); - - } else { - warnx("Unknown system state: #%d\n", current_status->state_machine); - } -} - -void state_machine_emergency(int status_pub, struct vehicle_status_s *current_status, const int mavlink_fd) //do not call state_machine_emergency_always_critical if we are in manual mode for these errors -{ - if (current_status->state_machine != SYSTEM_STATE_MANUAL) { //if we are in manual: user can react to errors themself - state_machine_emergency_always_critical(status_pub, current_status, mavlink_fd); - - } else { - //global_data_send_mavlink_statustext_message_out("[cmd] ERROR: take action immediately! (did not switch to error state because the system is in manual mode)", MAV_SEVERITY_CRITICAL); - } - -} - - - -// /* -// * Wrapper functions (to be used in the commander), all functions assume lock on current_status -// */ - -// /* These functions decide if an emergency exits and then switch to SYSTEM_STATE_MISSION_ABORT or SYSTEM_STATE_GROUND_ERROR -// * -// * START SUBSYSTEM/EMERGENCY FUNCTIONS -// * */ - -// void update_state_machine_subsystem_present(int status_pub, struct vehicle_status_s *current_status, subsystem_type_t *subsystem_type) -// { -// current_status->onboard_control_sensors_present |= 1 << *subsystem_type; -// current_status->counter++; -// current_status->timestamp = hrt_absolute_time(); -// orb_publish(ORB_ID(vehicle_status), status_pub, current_status); -// } - -// void update_state_machine_subsystem_notpresent(int status_pub, struct vehicle_status_s *current_status, subsystem_type_t *subsystem_type) -// { -// current_status->onboard_control_sensors_present &= ~(1 << *subsystem_type); -// current_status->counter++; -// current_status->timestamp = hrt_absolute_time(); -// orb_publish(ORB_ID(vehicle_status), status_pub, current_status); - -// /* if a subsystem was removed something went completely wrong */ - -// switch (*subsystem_type) { -// case SUBSYSTEM_TYPE_GYRO: -// //global_data_send_mavlink_statustext_message_out("Commander: gyro not present", MAV_SEVERITY_EMERGENCY); -// state_machine_emergency_always_critical(status_pub, current_status); -// break; - -// case SUBSYSTEM_TYPE_ACC: -// //global_data_send_mavlink_statustext_message_out("Commander: accelerometer not present", MAV_SEVERITY_EMERGENCY); -// state_machine_emergency_always_critical(status_pub, current_status); -// break; - -// case SUBSYSTEM_TYPE_MAG: -// //global_data_send_mavlink_statustext_message_out("Commander: magnetometer not present", MAV_SEVERITY_EMERGENCY); -// state_machine_emergency_always_critical(status_pub, current_status); -// break; - -// case SUBSYSTEM_TYPE_GPS: -// { -// uint8_t flight_env = global_data_parameter_storage->pm.param_values[PARAM_FLIGHT_ENV]; - -// if (flight_env == PX4_FLIGHT_ENVIRONMENT_OUTDOOR) { -// //global_data_send_mavlink_statustext_message_out("Commander: GPS not present", MAV_SEVERITY_EMERGENCY); -// state_machine_emergency(status_pub, current_status); -// } -// } -// break; - -// default: -// break; -// } - -// } - -// void update_state_machine_subsystem_enabled(int status_pub, struct vehicle_status_s *current_status, subsystem_type_t *subsystem_type) -// { -// current_status->onboard_control_sensors_enabled |= 1 << *subsystem_type; -// current_status->counter++; -// current_status->timestamp = hrt_absolute_time(); -// orb_publish(ORB_ID(vehicle_status), status_pub, current_status); -// } - -// void update_state_machine_subsystem_disabled(int status_pub, struct vehicle_status_s *current_status, subsystem_type_t *subsystem_type) -// { -// current_status->onboard_control_sensors_enabled &= ~(1 << *subsystem_type); -// current_status->counter++; -// current_status->timestamp = hrt_absolute_time(); -// orb_publish(ORB_ID(vehicle_status), status_pub, current_status); - -// /* if a subsystem was disabled something went completely wrong */ - -// switch (*subsystem_type) { -// case SUBSYSTEM_TYPE_GYRO: -// //global_data_send_mavlink_statustext_message_out("Commander: EMERGENCY - gyro disabled", MAV_SEVERITY_EMERGENCY); -// state_machine_emergency_always_critical(status_pub, current_status); -// break; - -// case SUBSYSTEM_TYPE_ACC: -// //global_data_send_mavlink_statustext_message_out("Commander: EMERGENCY - accelerometer disabled", MAV_SEVERITY_EMERGENCY); -// state_machine_emergency_always_critical(status_pub, current_status); -// break; - -// case SUBSYSTEM_TYPE_MAG: -// //global_data_send_mavlink_statustext_message_out("Commander: EMERGENCY - magnetometer disabled", MAV_SEVERITY_EMERGENCY); -// state_machine_emergency_always_critical(status_pub, current_status); -// break; - -// case SUBSYSTEM_TYPE_GPS: -// { -// uint8_t flight_env = (uint8_t)(global_data_parameter_storage->pm.param_values[PARAM_FLIGHT_ENV]); - -// if (flight_env == PX4_FLIGHT_ENVIRONMENT_OUTDOOR) { -// //global_data_send_mavlink_statustext_message_out("Commander: EMERGENCY - GPS disabled", MAV_SEVERITY_EMERGENCY); -// state_machine_emergency(status_pub, current_status); -// } -// } -// break; - -// default: -// break; -// } - -// } - - -// void update_state_machine_subsystem_healthy(int status_pub, struct vehicle_status_s *current_status, subsystem_type_t *subsystem_type) -// { -// current_status->onboard_control_sensors_health |= 1 << *subsystem_type; -// current_status->counter++; -// current_status->timestamp = hrt_absolute_time(); -// orb_publish(ORB_ID(vehicle_status), status_pub, current_status); - -// switch (*subsystem_type) { -// case SUBSYSTEM_TYPE_GYRO: -// //TODO state machine change (recovering) -// break; - -// case SUBSYSTEM_TYPE_ACC: -// //TODO state machine change -// break; - -// case SUBSYSTEM_TYPE_MAG: -// //TODO state machine change -// break; - -// case SUBSYSTEM_TYPE_GPS: -// //TODO state machine change -// break; - -// default: -// break; -// } - - -// } - - -// void update_state_machine_subsystem_unhealthy(int status_pub, struct vehicle_status_s *current_status, subsystem_type_t *subsystem_type) -// { -// bool previosly_healthy = (bool)(current_status->onboard_control_sensors_health & 1 << *subsystem_type); -// current_status->onboard_control_sensors_health &= ~(1 << *subsystem_type); -// current_status->counter++; -// current_status->timestamp = hrt_absolute_time(); -// orb_publish(ORB_ID(vehicle_status), status_pub, current_status); - -// /* if we received unhealthy message more than *_HEALTH_COUNTER_LIMIT, switch to error state */ - -// switch (*subsystem_type) { -// case SUBSYSTEM_TYPE_GYRO: -// //global_data_send_mavlink_statustext_message_out("Commander: gyro unhealthy", MAV_SEVERITY_CRITICAL); - -// if (previosly_healthy) //only throw emergency if previously healthy -// state_machine_emergency_always_critical(status_pub, current_status); - -// break; - -// case SUBSYSTEM_TYPE_ACC: -// //global_data_send_mavlink_statustext_message_out("Commander: accelerometer unhealthy", MAV_SEVERITY_CRITICAL); - -// if (previosly_healthy) //only throw emergency if previously healthy -// state_machine_emergency_always_critical(status_pub, current_status); - -// break; - -// case SUBSYSTEM_TYPE_MAG: -// //global_data_send_mavlink_statustext_message_out("Commander: magnetometer unhealthy", MAV_SEVERITY_CRITICAL); - -// if (previosly_healthy) //only throw emergency if previously healthy -// state_machine_emergency_always_critical(status_pub, current_status); - -// break; - -// case SUBSYSTEM_TYPE_GPS: -// // //TODO: remove this block -// // break; -// // /////////////////// -// //global_data_send_mavlink_statustext_message_out("Commander: GPS unhealthy", MAV_SEVERITY_CRITICAL); - -// // printf("previosly_healthy = %u\n", previosly_healthy); -// if (previosly_healthy) //only throw emergency if previously healthy -// state_machine_emergency(status_pub, current_status); - -// break; - -// default: -// break; -// } - -// } - - -/* END SUBSYSTEM/EMERGENCY FUNCTIONS*/ - - -void update_state_machine_got_position_fix(int status_pub, struct vehicle_status_s *current_status, const int mavlink_fd) -{ - /* Depending on the current state switch state */ - if (current_status->state_machine == SYSTEM_STATE_PREFLIGHT) { - do_state_update(status_pub, current_status, mavlink_fd, (commander_state_machine_t)SYSTEM_STATE_STANDBY); - } -} - -void update_state_machine_no_position_fix(int status_pub, struct vehicle_status_s *current_status, const int mavlink_fd) -{ - /* Depending on the current state switch state */ - if (current_status->state_machine == SYSTEM_STATE_STANDBY || current_status->state_machine == SYSTEM_STATE_GROUND_READY || current_status->state_machine == SYSTEM_STATE_AUTO) { - state_machine_emergency(status_pub, current_status, mavlink_fd); - } -} - -void update_state_machine_arm(int status_pub, struct vehicle_status_s *current_status, const int mavlink_fd) -{ - if (current_status->state_machine == SYSTEM_STATE_STANDBY) { - printf("[cmd] arming\n"); - do_state_update(status_pub, current_status, mavlink_fd, (commander_state_machine_t)SYSTEM_STATE_GROUND_READY); - } -} - -void update_state_machine_disarm(int status_pub, struct vehicle_status_s *current_status, const int mavlink_fd) -{ - if (current_status->state_machine == SYSTEM_STATE_GROUND_READY || current_status->state_machine == SYSTEM_STATE_MANUAL || current_status->state_machine == SYSTEM_STATE_PREFLIGHT) { - printf("[cmd] going standby\n"); - do_state_update(status_pub, current_status, mavlink_fd, (commander_state_machine_t)SYSTEM_STATE_STANDBY); - - } else if (current_status->state_machine == SYSTEM_STATE_STABILIZED || current_status->state_machine == SYSTEM_STATE_AUTO) { - printf("[cmd] MISSION ABORT!\n"); - do_state_update(status_pub, current_status, mavlink_fd, (commander_state_machine_t)SYSTEM_STATE_STANDBY); - } -} - -void update_state_machine_mode_manual(int status_pub, struct vehicle_status_s *current_status, const int mavlink_fd) -{ - int old_mode = current_status->flight_mode; - current_status->flight_mode = VEHICLE_FLIGHT_MODE_MANUAL; - - current_status->flag_control_manual_enabled = true; - - /* set behaviour based on airframe */ - if ((current_status->system_type == VEHICLE_TYPE_QUADROTOR) || - (current_status->system_type == VEHICLE_TYPE_HEXAROTOR) || - (current_status->system_type == VEHICLE_TYPE_OCTOROTOR)) { - - /* assuming a rotary wing, set to SAS */ - current_status->manual_control_mode = VEHICLE_MANUAL_CONTROL_MODE_SAS; - current_status->flag_control_attitude_enabled = true; - current_status->flag_control_rates_enabled = true; - - } else { - - /* assuming a fixed wing, set to direct pass-through */ - current_status->manual_control_mode = VEHICLE_MANUAL_CONTROL_MODE_DIRECT; - current_status->flag_control_attitude_enabled = false; - current_status->flag_control_rates_enabled = false; - } - - if (old_mode != current_status->flight_mode) state_machine_publish(status_pub, current_status, mavlink_fd); - - if (current_status->state_machine == SYSTEM_STATE_GROUND_READY || current_status->state_machine == SYSTEM_STATE_STABILIZED || current_status->state_machine == SYSTEM_STATE_AUTO) { - printf("[cmd] manual mode\n"); - do_state_update(status_pub, current_status, mavlink_fd, (commander_state_machine_t)SYSTEM_STATE_MANUAL); - } -} - -void update_state_machine_mode_stabilized(int status_pub, struct vehicle_status_s *current_status, const int mavlink_fd) -{ - if (current_status->state_machine == SYSTEM_STATE_GROUND_READY || current_status->state_machine == SYSTEM_STATE_STABILIZED || current_status->state_machine == SYSTEM_STATE_MANUAL || current_status->state_machine == SYSTEM_STATE_AUTO) { - int old_mode = current_status->flight_mode; - int old_manual_control_mode = current_status->manual_control_mode; - current_status->flight_mode = VEHICLE_FLIGHT_MODE_MANUAL; - current_status->manual_control_mode = VEHICLE_MANUAL_CONTROL_MODE_SAS; - current_status->flag_control_attitude_enabled = true; - current_status->flag_control_rates_enabled = true; - current_status->flag_control_manual_enabled = true; - - if (old_mode != current_status->flight_mode || - old_manual_control_mode != current_status->manual_control_mode) { - printf("[cmd] att stabilized mode\n"); - do_state_update(status_pub, current_status, mavlink_fd, (commander_state_machine_t)SYSTEM_STATE_MANUAL); - state_machine_publish(status_pub, current_status, mavlink_fd); - } - - } -} - -void update_state_machine_mode_guided(int status_pub, struct vehicle_status_s *current_status, const int mavlink_fd) -{ - if (!current_status->flag_vector_flight_mode_ok) { - mavlink_log_critical(mavlink_fd, "NO POS LOCK, REJ. GUIDED MODE"); - tune_error(); - return; - } - - if (current_status->state_machine == SYSTEM_STATE_GROUND_READY || current_status->state_machine == SYSTEM_STATE_MANUAL || current_status->state_machine == SYSTEM_STATE_AUTO) { - printf("[cmd] position guided mode\n"); - int old_mode = current_status->flight_mode; - current_status->flight_mode = VEHICLE_FLIGHT_MODE_STAB; - current_status->flag_control_manual_enabled = false; - current_status->flag_control_attitude_enabled = true; - current_status->flag_control_rates_enabled = true; - do_state_update(status_pub, current_status, mavlink_fd, (commander_state_machine_t)SYSTEM_STATE_STABILIZED); - - if (old_mode != current_status->flight_mode) state_machine_publish(status_pub, current_status, mavlink_fd); - - } -} - -void update_state_machine_mode_auto(int status_pub, struct vehicle_status_s *current_status, const int mavlink_fd) -{ - if (!current_status->flag_vector_flight_mode_ok) { - mavlink_log_critical(mavlink_fd, "NO POS LOCK, REJ. AUTO MODE"); - return; - } - - if (current_status->state_machine == SYSTEM_STATE_GROUND_READY || current_status->state_machine == SYSTEM_STATE_MANUAL || current_status->state_machine == SYSTEM_STATE_STABILIZED) { - printf("[cmd] auto mode\n"); - int old_mode = current_status->flight_mode; - current_status->flight_mode = VEHICLE_FLIGHT_MODE_AUTO; - current_status->flag_control_manual_enabled = false; - current_status->flag_control_attitude_enabled = true; - current_status->flag_control_rates_enabled = true; - do_state_update(status_pub, current_status, mavlink_fd, (commander_state_machine_t)SYSTEM_STATE_AUTO); - - if (old_mode != current_status->flight_mode) state_machine_publish(status_pub, current_status, mavlink_fd); - } -} - - -uint8_t update_state_machine_mode_request(int status_pub, struct vehicle_status_s *current_status, const int mavlink_fd, uint8_t mode) -{ - uint8_t ret = 1; - - /* Switch on HIL if in standby and not already in HIL mode */ - if ((mode & VEHICLE_MODE_FLAG_HIL_ENABLED) - && !current_status->flag_hil_enabled) { - if ((current_status->state_machine == SYSTEM_STATE_STANDBY)) { - /* Enable HIL on request */ - current_status->flag_hil_enabled = true; - ret = OK; - state_machine_publish(status_pub, current_status, mavlink_fd); - publish_armed_status(current_status); - printf("[cmd] Enabling HIL, locking down all actuators for safety.\n\t(Arming the system will not activate them while in HIL mode)\n"); - - } else if (current_status->state_machine != SYSTEM_STATE_STANDBY && - current_status->flag_system_armed) { - - mavlink_log_critical(mavlink_fd, "REJECTING HIL, disarm first!") - - } else { - - mavlink_log_critical(mavlink_fd, "REJECTING HIL, not in standby.") - } - } - - /* switch manual / auto */ - if (mode & VEHICLE_MODE_FLAG_AUTO_ENABLED) { - update_state_machine_mode_auto(status_pub, current_status, mavlink_fd); - - } else if (mode & VEHICLE_MODE_FLAG_STABILIZED_ENABLED) { - update_state_machine_mode_stabilized(status_pub, current_status, mavlink_fd); - - } else if (mode & VEHICLE_MODE_FLAG_GUIDED_ENABLED) { - update_state_machine_mode_guided(status_pub, current_status, mavlink_fd); - - } else if (mode & VEHICLE_MODE_FLAG_MANUAL_INPUT_ENABLED) { - update_state_machine_mode_manual(status_pub, current_status, mavlink_fd); - } - - /* vehicle is disarmed, mode requests arming */ - if (!(current_status->flag_system_armed) && (mode & VEHICLE_MODE_FLAG_SAFETY_ARMED)) { - /* only arm in standby state */ - // XXX REMOVE - if (current_status->state_machine == SYSTEM_STATE_STANDBY || current_status->state_machine == SYSTEM_STATE_PREFLIGHT) { - do_state_update(status_pub, current_status, mavlink_fd, (commander_state_machine_t)SYSTEM_STATE_GROUND_READY); - ret = OK; - printf("[cmd] arming due to command request\n"); - } - } - - /* vehicle is armed, mode requests disarming */ - if (current_status->flag_system_armed && !(mode & VEHICLE_MODE_FLAG_SAFETY_ARMED)) { - /* only disarm in ground ready */ - if (current_status->state_machine == SYSTEM_STATE_GROUND_READY) { - do_state_update(status_pub, current_status, mavlink_fd, (commander_state_machine_t)SYSTEM_STATE_STANDBY); - ret = OK; - printf("[cmd] disarming due to command request\n"); - } - } - - /* NEVER actually switch off HIL without reboot */ - if (current_status->flag_hil_enabled && !(mode & VEHICLE_MODE_FLAG_HIL_ENABLED)) { - warnx("DENYING request to switch off HIL. Please power cycle (safety reasons)\n"); - mavlink_log_critical(mavlink_fd, "Power-cycle to exit HIL"); - ret = ERROR; - } - - return ret; -} - -uint8_t update_state_machine_custom_mode_request(int status_pub, struct vehicle_status_s *current_status, const int mavlink_fd, uint8_t custom_mode) //TODO: add more checks to avoid state switching in critical situations -{ - commander_state_machine_t current_system_state = current_status->state_machine; - - uint8_t ret = 1; - - switch (custom_mode) { - case SYSTEM_STATE_GROUND_READY: - break; - - case SYSTEM_STATE_STANDBY: - break; - - case SYSTEM_STATE_REBOOT: - printf("try to reboot\n"); - - if (current_system_state == SYSTEM_STATE_STANDBY - || current_system_state == SYSTEM_STATE_PREFLIGHT - || current_status->flag_hil_enabled) { - printf("system will reboot\n"); - mavlink_log_critical(mavlink_fd, "Rebooting.."); - usleep(200000); - do_state_update(status_pub, current_status, mavlink_fd, (commander_state_machine_t)SYSTEM_STATE_REBOOT); - ret = 0; - } - - break; - - case SYSTEM_STATE_AUTO: - printf("try to switch to auto/takeoff\n"); - - if (current_system_state == SYSTEM_STATE_GROUND_READY || current_system_state == SYSTEM_STATE_MANUAL) { - do_state_update(status_pub, current_status, mavlink_fd, (commander_state_machine_t)SYSTEM_STATE_AUTO); - printf("state: auto\n"); - ret = 0; - } - - break; - - case SYSTEM_STATE_MANUAL: - printf("try to switch to manual\n"); - - if (current_system_state == SYSTEM_STATE_GROUND_READY || current_system_state == SYSTEM_STATE_AUTO) { - do_state_update(status_pub, current_status, mavlink_fd, (commander_state_machine_t)SYSTEM_STATE_MANUAL); - printf("state: manual\n"); - ret = 0; - } - - break; - - default: - break; - } - - return ret; -} - diff --git a/apps/commander/state_machine_helper.h b/apps/commander/state_machine_helper.h deleted file mode 100644 index 2f2ccc729..000000000 --- a/apps/commander/state_machine_helper.h +++ /dev/null @@ -1,209 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * Author: Thomas Gubler <thomasgubler@student.ethz.ch> - * Julian Oes <joes@student.ethz.ch> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/** - * @file state_machine_helper.h - * State machine helper functions definitions - */ - -#ifndef STATE_MACHINE_HELPER_H_ -#define STATE_MACHINE_HELPER_H_ - -#define GPS_NOFIX_COUNTER_LIMIT 4 //need GPS_NOFIX_COUNTER_LIMIT gps packets with a bad fix to call an error (if outdoor) -#define GPS_GOTFIX_COUNTER_REQUIRED 4 //need GPS_GOTFIX_COUNTER_REQUIRED gps packets with a good fix to obtain position lock - -#include <uORB/uORB.h> -#include <uORB/topics/vehicle_status.h> - -/** - * Switch to new state with no checking. - * - * do_state_update: this is the functions that all other functions have to call in order to update the state. - * the function does not question the state change, this must be done before - * The function performs actions that are connected with the new state (buzzer, reboot, ...) - * - * @param status_pub file descriptor for state update topic publication - * @param current_status pointer to the current state machine to operate on - * @param mavlink_fd file descriptor for MAVLink statustext messages - * - * @return 0 (macro OK) or 1 on error (macro ERROR) - */ -int do_state_update(int status_pub, struct vehicle_status_s *current_status, const int mavlink_fd, commander_state_machine_t new_state); - -/* These functions decide if an emergency exits and then switch to SYSTEM_STATE_MISSION_ABORT or SYSTEM_STATE_GROUND_ERROR */ -// void update_state_machine_subsystem_present(int status_pub, struct vehicle_status_s *current_status, subsystem_type_t *subsystem_type); -// void update_state_machine_subsystem_notpresent(int status_pub, struct vehicle_status_s *current_status, subsystem_type_t *subsystem_type); - -// void update_state_machine_subsystem_enabled(int status_pub, struct vehicle_status_s *current_status, subsystem_type_t *subsystem_type); -// void update_state_machine_subsystem_disabled(int status_pub, struct vehicle_status_s *current_status, subsystem_type_t *subsystem_type); - -// void update_state_machine_subsystem_healthy(int status_pub, struct vehicle_status_s *current_status, subsystem_type_t *subsystem_type); -// void update_state_machine_subsystem_unhealthy(int status_pub, struct vehicle_status_s *current_status, subsystem_type_t *subsystem_type); - - -/** - * Handle state machine if got position fix - * - * @param status_pub file descriptor for state update topic publication - * @param current_status pointer to the current state machine to operate on - * @param mavlink_fd file descriptor for MAVLink statustext messages - */ -void update_state_machine_got_position_fix(int status_pub, struct vehicle_status_s *current_status, const int mavlink_fd); - -/** - * Handle state machine if position fix lost - * - * @param status_pub file descriptor for state update topic publication - * @param current_status pointer to the current state machine to operate on - * @param mavlink_fd file descriptor for MAVLink statustext messages - */ -void update_state_machine_no_position_fix(int status_pub, struct vehicle_status_s *current_status, const int mavlink_fd); - -/** - * Handle state machine if user wants to arm - * - * @param status_pub file descriptor for state update topic publication - * @param current_status pointer to the current state machine to operate on - * @param mavlink_fd file descriptor for MAVLink statustext messages - */ -void update_state_machine_arm(int status_pub, struct vehicle_status_s *current_status, const int mavlink_fd); - -/** - * Handle state machine if user wants to disarm - * - * @param status_pub file descriptor for state update topic publication - * @param current_status pointer to the current state machine to operate on - * @param mavlink_fd file descriptor for MAVLink statustext messages - */ -void update_state_machine_disarm(int status_pub, struct vehicle_status_s *current_status, const int mavlink_fd); - -/** - * Handle state machine if mode switch is manual - * - * @param status_pub file descriptor for state update topic publication - * @param current_status pointer to the current state machine to operate on - * @param mavlink_fd file descriptor for MAVLink statustext messages - */ -void update_state_machine_mode_manual(int status_pub, struct vehicle_status_s *current_status, const int mavlink_fd); - -/** - * Handle state machine if mode switch is stabilized - * - * @param status_pub file descriptor for state update topic publication - * @param current_status pointer to the current state machine to operate on - * @param mavlink_fd file descriptor for MAVLink statustext messages - */ -void update_state_machine_mode_stabilized(int status_pub, struct vehicle_status_s *current_status, const int mavlink_fd); - -/** - * Handle state machine if mode switch is guided - * - * @param status_pub file descriptor for state update topic publication - * @param current_status pointer to the current state machine to operate on - * @param mavlink_fd file descriptor for MAVLink statustext messages - */ -void update_state_machine_mode_guided(int status_pub, struct vehicle_status_s *current_status, const int mavlink_fd); - -/** - * Handle state machine if mode switch is auto - * - * @param status_pub file descriptor for state update topic publication - * @param current_status pointer to the current state machine to operate on - * @param mavlink_fd file descriptor for MAVLink statustext messages - */ -void update_state_machine_mode_auto(int status_pub, struct vehicle_status_s *current_status, const int mavlink_fd); - -/** - * Publish current state information - * - * @param status_pub file descriptor for state update topic publication - * @param current_status pointer to the current state machine to operate on - * @param mavlink_fd file descriptor for MAVLink statustext messages - */ -void state_machine_publish(int status_pub, struct vehicle_status_s *current_status, const int mavlink_fd); - - -/* - * Functions that handle incoming requests to change the state machine or a parameter (probably from the mavlink app). - * If the request is obeyed the functions return 0 - * - */ - -/** - * Handles *incoming request* to switch to a specific state, if state change is successful returns 0 - * - * @param status_pub file descriptor for state update topic publication - * @param current_status pointer to the current state machine to operate on - * @param mavlink_fd file descriptor for MAVLink statustext messages - */ -uint8_t update_state_machine_mode_request(int status_pub, struct vehicle_status_s *current_status, const int mavlink_fd, uint8_t mode); - -/** - * Handles *incoming request* to switch to a specific custom state, if state change is successful returns 0 - * - * @param status_pub file descriptor for state update topic publication - * @param current_status pointer to the current state machine to operate on - * @param mavlink_fd file descriptor for MAVLink statustext messages - */ -uint8_t update_state_machine_custom_mode_request(int status_pub, struct vehicle_status_s *current_status, const int mavlink_fd, uint8_t custom_mode); - -/** - * Always switches to critical mode under any circumstances. - * - * @param status_pub file descriptor for state update topic publication - * @param current_status pointer to the current state machine to operate on - * @param mavlink_fd file descriptor for MAVLink statustext messages - */ -void state_machine_emergency_always_critical(int status_pub, struct vehicle_status_s *current_status, const int mavlink_fd); - -/** - * Switches to emergency if required. - * - * @param status_pub file descriptor for state update topic publication - * @param current_status pointer to the current state machine to operate on - * @param mavlink_fd file descriptor for MAVLink statustext messages - */ -void state_machine_emergency(int status_pub, struct vehicle_status_s *current_status, const int mavlink_fd); - -/** - * Publish the armed state depending on the current system state - * - * @param current_status the current system status - */ -void publish_armed_status(const struct vehicle_status_s *current_status); - - - -#endif /* STATE_MACHINE_HELPER_H_ */ diff --git a/apps/drivers/boards/px4fmu/Makefile b/apps/drivers/boards/px4fmu/Makefile deleted file mode 100644 index 6b183d8d2..000000000 --- a/apps/drivers/boards/px4fmu/Makefile +++ /dev/null @@ -1,41 +0,0 @@ -############################################################################ -# -# Copyright (C) 2012 PX4 Development Team. All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name PX4 nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -# -# Board-specific startup code for the PX4FMU -# - -INCLUDES = $(TOPDIR)/arch/arm/src/stm32 $(TOPDIR)/arch/arm/src/common -LIBNAME = brd_px4fmu - -include $(APPDIR)/mk/app.mk diff --git a/apps/drivers/boards/px4fmu/px4fmu_can.c b/apps/drivers/boards/px4fmu/px4fmu_can.c deleted file mode 100644 index 0d0b5fcd3..000000000 --- a/apps/drivers/boards/px4fmu/px4fmu_can.c +++ /dev/null @@ -1,141 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/** - * @file px4fmu_can.c - * - * Board-specific CAN functions. - */ - - -/************************************************************************************ - * Included Files - ************************************************************************************/ - -#include <nuttx/config.h> - -#include <errno.h> -#include <debug.h> - -#include <nuttx/can.h> -#include <arch/board/board.h> - -#include "chip.h" -#include "up_arch.h" - -#include "stm32.h" -#include "stm32_can.h" -#include "px4fmu_internal.h" - -/************************************************************************************ - * Pre-processor Definitions - ************************************************************************************/ -/* Configuration ********************************************************************/ - -#if defined(CONFIG_STM32_CAN1) && defined(CONFIG_STM32_CAN2) -# warning "Both CAN1 and CAN2 are enabled. Assuming only CAN1." -# undef CONFIG_STM32_CAN2 -#endif - -#ifdef CONFIG_STM32_CAN1 -# define CAN_PORT 1 -#else -# define CAN_PORT 2 -#endif - -/* Debug ***************************************************************************/ -/* Non-standard debug that may be enabled just for testing CAN */ - -#ifdef CONFIG_DEBUG_CAN -# define candbg dbg -# define canvdbg vdbg -# define canlldbg lldbg -# define canllvdbg llvdbg -#else -# define candbg(x...) -# define canvdbg(x...) -# define canlldbg(x...) -# define canllvdbg(x...) -#endif - -/************************************************************************************ - * Private Functions - ************************************************************************************/ - -/************************************************************************************ - * Public Functions - ************************************************************************************/ - -/************************************************************************************ - * Name: can_devinit - * - * Description: - * All STM32 architectures must provide the following interface to work with - * examples/can. - * - ************************************************************************************/ - -int can_devinit(void) -{ - static bool initialized = false; - struct can_dev_s *can; - int ret; - - /* Check if we have already initialized */ - - if (!initialized) { - /* Call stm32_caninitialize() to get an instance of the CAN interface */ - - can = stm32_caninitialize(CAN_PORT); - - if (can == NULL) { - candbg("ERROR: Failed to get CAN interface\n"); - return -ENODEV; - } - - /* Register the CAN driver at "/dev/can0" */ - - ret = can_register("/dev/can0", can); - - if (ret < 0) { - candbg("ERROR: can_register failed: %d\n", ret); - return ret; - } - - /* Now we are initialized */ - - initialized = true; - } - - return OK; -} diff --git a/apps/drivers/boards/px4fmu/px4fmu_init.c b/apps/drivers/boards/px4fmu/px4fmu_init.c deleted file mode 100644 index 9960c6bbd..000000000 --- a/apps/drivers/boards/px4fmu/px4fmu_init.c +++ /dev/null @@ -1,232 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/** - * @file px4fmu_init.c - * - * PX4FMU-specific early startup code. This file implements the - * nsh_archinitialize() function that is called early by nsh during startup. - * - * Code here is run before the rcS script is invoked; it should start required - * subsystems and perform board-specific initialisation. - */ - -/**************************************************************************** - * Included Files - ****************************************************************************/ - -#include <nuttx/config.h> - -#include <stdbool.h> -#include <stdio.h> -#include <debug.h> -#include <errno.h> - -#include <nuttx/arch.h> -#include <nuttx/spi.h> -#include <nuttx/i2c.h> -#include <nuttx/mmcsd.h> -#include <nuttx/analog/adc.h> - -#include "stm32_internal.h" -#include "px4fmu_internal.h" -#include "stm32_uart.h" - -#include <arch/board/board.h> - -#include <drivers/drv_hrt.h> -#include <drivers/drv_led.h> - -#include <systemlib/cpuload.h> - -/**************************************************************************** - * Pre-Processor Definitions - ****************************************************************************/ - -/* Configuration ************************************************************/ - -/* Debug ********************************************************************/ - -#ifdef CONFIG_CPP_HAVE_VARARGS -# ifdef CONFIG_DEBUG -# define message(...) lowsyslog(__VA_ARGS__) -# else -# define message(...) printf(__VA_ARGS__) -# endif -#else -# ifdef CONFIG_DEBUG -# define message lowsyslog -# else -# define message printf -# endif -#endif - -/**************************************************************************** - * Protected Functions - ****************************************************************************/ - -/**************************************************************************** - * Public Functions - ****************************************************************************/ - -/************************************************************************************ - * Name: stm32_boardinitialize - * - * Description: - * All STM32 architectures must provide the following entry point. This entry point - * is called early in the intitialization -- after all memory has been configured - * and mapped but before any devices have been initialized. - * - ************************************************************************************/ - -__EXPORT void stm32_boardinitialize(void) -{ - /* configure SPI interfaces */ - stm32_spiinitialize(); - - /* configure LEDs */ - up_ledinit(); -} - -/**************************************************************************** - * Name: nsh_archinitialize - * - * Description: - * Perform architecture specific initialization - * - ****************************************************************************/ - -static struct spi_dev_s *spi1; -static struct spi_dev_s *spi3; - -#include <math.h> - -#ifdef __cplusplus -__EXPORT int matherr(struct __exception *e) -{ - return 1; -} -#else -__EXPORT int matherr(struct exception *e) -{ - return 1; -} -#endif - -__EXPORT int nsh_archinitialize(void) -{ - int result; - - /* configure the high-resolution time/callout interface */ - hrt_init(); - - /* configure CPU load estimation */ -#ifdef CONFIG_SCHED_INSTRUMENTATION - cpuload_initialize_once(); -#endif - - /* set up the serial DMA polling */ - static struct hrt_call serial_dma_call; - struct timespec ts; - - /* - * Poll at 1ms intervals for received bytes that have not triggered - * a DMA event. - */ - ts.tv_sec = 0; - ts.tv_nsec = 1000000; - - hrt_call_every(&serial_dma_call, - ts_to_abstime(&ts), - ts_to_abstime(&ts), - (hrt_callout)stm32_serial_dma_poll, - NULL); - - // initial LED state - drv_led_start(); - up_ledoff(LED_BLUE); - up_ledoff(LED_AMBER); - up_ledon(LED_BLUE); - - /* Configure SPI-based devices */ - - spi1 = up_spiinitialize(1); - - if (!spi1) { - message("[boot] FAILED to initialize SPI port 1\r\n"); - up_ledon(LED_AMBER); - return -ENODEV; - } - - // Default SPI1 to 1MHz and de-assert the known chip selects. - SPI_SETFREQUENCY(spi1, 10000000); - SPI_SETBITS(spi1, 8); - SPI_SETMODE(spi1, SPIDEV_MODE3); - SPI_SELECT(spi1, PX4_SPIDEV_GYRO, false); - SPI_SELECT(spi1, PX4_SPIDEV_ACCEL, false); - SPI_SELECT(spi1, PX4_SPIDEV_MPU, false); - up_udelay(20); - - message("[boot] Successfully initialized SPI port 1\r\n"); - - /* Get the SPI port for the microSD slot */ - - message("[boot] Initializing SPI port 3\n"); - spi3 = up_spiinitialize(3); - - if (!spi3) { - message("[boot] FAILED to initialize SPI port 3\n"); - up_ledon(LED_AMBER); - return -ENODEV; - } - - message("[boot] Successfully initialized SPI port 3\n"); - - /* Now bind the SPI interface to the MMCSD driver */ - result = mmcsd_spislotinitialize(CONFIG_NSH_MMCSDMINOR, CONFIG_NSH_MMCSDSLOTNO, spi3); - - if (result != OK) { - message("[boot] FAILED to bind SPI port 3 to the MMCSD driver\n"); - up_ledon(LED_AMBER); - return -ENODEV; - } - - message("[boot] Successfully bound SPI port 3 to the MMCSD driver\n"); - - stm32_configgpio(GPIO_ADC1_IN10); - stm32_configgpio(GPIO_ADC1_IN11); - stm32_configgpio(GPIO_ADC1_IN12); - stm32_configgpio(GPIO_ADC1_IN13); // jumperable to MPU6000 DRDY on some boards - - return OK; -} diff --git a/apps/drivers/boards/px4fmu/px4fmu_internal.h b/apps/drivers/boards/px4fmu/px4fmu_internal.h deleted file mode 100644 index 6550fdf3d..000000000 --- a/apps/drivers/boards/px4fmu/px4fmu_internal.h +++ /dev/null @@ -1,161 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/** - * @file px4fmu_internal.h - * - * PX4FMU internal definitions - */ - -#pragma once - -/**************************************************************************************************** - * Included Files - ****************************************************************************************************/ - -#include <nuttx/config.h> -#include <nuttx/compiler.h> -#include <stdint.h> - -__BEGIN_DECLS - -/* these headers are not C++ safe */ -#include <stm32_internal.h> - - -/**************************************************************************************************** - * Definitions - ****************************************************************************************************/ -/* Configuration ************************************************************************************/ - -#ifdef CONFIG_STM32_SPI2 -# error "SPI2 is not supported on this board" -#endif - -#if defined(CONFIG_STM32_CAN1) -# warning "CAN1 is not supported on this board" -#endif - -/* PX4FMU GPIOs ***********************************************************************************/ -/* LEDs */ - -#define GPIO_LED1 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN15) -#define GPIO_LED2 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN14) - -/* External interrupts */ -#define GPIO_EXTI_COMPASS (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTB|GPIO_PIN1) -// XXX MPU6000 DRDY? - -/* SPI chip selects */ -#define GPIO_SPI_CS_GYRO (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN14) -#define GPIO_SPI_CS_ACCEL (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN15) -#define GPIO_SPI_CS_MPU (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN0) -#define GPIO_SPI_CS_SDCARD (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN4) - -/* User GPIOs - * - * GPIO0-1 are the buffered high-power GPIOs. - * GPIO2-5 are the USART2 pins. - * GPIO6-7 are the CAN2 pins. - */ -#define GPIO_GPIO0_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTC|GPIO_PIN4) -#define GPIO_GPIO1_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTC|GPIO_PIN5) -#define GPIO_GPIO2_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTA|GPIO_PIN0) -#define GPIO_GPIO3_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTA|GPIO_PIN1) -#define GPIO_GPIO4_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTA|GPIO_PIN2) -#define GPIO_GPIO5_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTA|GPIO_PIN3) -#define GPIO_GPIO6_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTB|GPIO_PIN13) -#define GPIO_GPIO7_INPUT (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTB|GPIO_PIN2) -#define GPIO_GPIO0_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN4) -#define GPIO_GPIO1_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN5) -#define GPIO_GPIO2_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN0) -#define GPIO_GPIO3_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN1) -#define GPIO_GPIO4_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN2) -#define GPIO_GPIO5_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN3) -#define GPIO_GPIO6_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN13) -#define GPIO_GPIO7_OUTPUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN12) -#define GPIO_GPIO_DIR (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN13) - -/* USB OTG FS - * - * PA9 OTG_FS_VBUS VBUS sensing (also connected to the green LED) - */ -#define GPIO_OTGFS_VBUS (GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_OPENDRAIN|GPIO_PORTA|GPIO_PIN9) - -/* PWM - * - * The PX4FMU has five PWM outputs, of which only the output on - * pin PC8 is fixed assigned to this function. The other four possible - * pwm sources are the TX, RX, RTS and CTS pins of USART2 - * - * Alternate function mapping: - * PC8 - BUZZER - TIM8_CH3/SDIO_D0 /TIM3_CH3/ USART6_CK / DCMI_D2 - */ - -#ifdef CONFIG_PWM -# if defined(CONFIG_STM32_TIM3_PWM) -# define BUZZER_PWMCHANNEL 3 -# define BUZZER_PWMTIMER 3 -# elif defined(CONFIG_STM32_TIM8_PWM) -# define BUZZER_PWMCHANNEL 3 -# define BUZZER_PWMTIMER 8 -# endif -#endif - -/**************************************************************************************************** - * Public Types - ****************************************************************************************************/ - -/**************************************************************************************************** - * Public data - ****************************************************************************************************/ - -#ifndef __ASSEMBLY__ - -/**************************************************************************************************** - * Public Functions - ****************************************************************************************************/ - -/**************************************************************************************************** - * Name: stm32_spiinitialize - * - * Description: - * Called to configure SPI chip select GPIO pins for the PX4FMU board. - * - ****************************************************************************************************/ - -extern void stm32_spiinitialize(void); - -#endif /* __ASSEMBLY__ */ - -__END_DECLS diff --git a/apps/drivers/boards/px4fmu/px4fmu_led.c b/apps/drivers/boards/px4fmu/px4fmu_led.c deleted file mode 100644 index fd1e159aa..000000000 --- a/apps/drivers/boards/px4fmu/px4fmu_led.c +++ /dev/null @@ -1,88 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/** - * @file px4fmu_led.c - * - * PX4FMU LED backend. - */ - -#include <nuttx/config.h> - -#include <stdint.h> -#include <stdbool.h> -#include <debug.h> - -#include <arch/board/board.h> - -#include "chip.h" -#include "up_arch.h" -#include "up_internal.h" -#include "stm32_internal.h" -#include "px4fmu_internal.h" - -__EXPORT void up_ledinit() -{ - /* Configure LED1-2 GPIOs for output */ - - stm32_configgpio(GPIO_LED1); - stm32_configgpio(GPIO_LED2); -} - -__EXPORT void up_ledon(int led) -{ - if (led == 0) - { - /* Pull down to switch on */ - stm32_gpiowrite(GPIO_LED1, false); - } - if (led == 1) - { - /* Pull down to switch on */ - stm32_gpiowrite(GPIO_LED2, false); - } -} - -__EXPORT void up_ledoff(int led) -{ - if (led == 0) - { - /* Pull up to switch off */ - stm32_gpiowrite(GPIO_LED1, true); - } - if (led == 1) - { - /* Pull up to switch off */ - stm32_gpiowrite(GPIO_LED2, true); - } -} diff --git a/apps/drivers/boards/px4fmu/px4fmu_pwm_servo.c b/apps/drivers/boards/px4fmu/px4fmu_pwm_servo.c deleted file mode 100644 index cb8918306..000000000 --- a/apps/drivers/boards/px4fmu/px4fmu_pwm_servo.c +++ /dev/null @@ -1,87 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* - * @file px4fmu_pwm_servo.c - * - * Configuration data for the stm32 pwm_servo driver. - * - * Note that these arrays must always be fully-sized. - */ - -#include <stdint.h> - -#include <drivers/stm32/drv_pwm_servo.h> - -#include <arch/board/board.h> -#include <drivers/drv_pwm_output.h> - -#include <stm32_internal.h> -#include <stm32_gpio.h> -#include <stm32_tim.h> - -__EXPORT const struct pwm_servo_timer pwm_timers[PWM_SERVO_MAX_TIMERS] = { - { - .base = STM32_TIM2_BASE, - .clock_register = STM32_RCC_APB1ENR, - .clock_bit = RCC_APB1ENR_TIM2EN, - .clock_freq = STM32_APB1_TIM2_CLKIN - } -}; - -__EXPORT const struct pwm_servo_channel pwm_channels[PWM_SERVO_MAX_CHANNELS] = { - { - .gpio = GPIO_TIM2_CH1OUT, - .timer_index = 0, - .timer_channel = 1, - .default_value = 1000, - }, - { - .gpio = GPIO_TIM2_CH2OUT, - .timer_index = 0, - .timer_channel = 2, - .default_value = 1000, - }, - { - .gpio = GPIO_TIM2_CH3OUT, - .timer_index = 0, - .timer_channel = 3, - .default_value = 1000, - }, - { - .gpio = GPIO_TIM2_CH4OUT, - .timer_index = 0, - .timer_channel = 4, - .default_value = 1000, - } -}; diff --git a/apps/drivers/boards/px4fmu/px4fmu_spi.c b/apps/drivers/boards/px4fmu/px4fmu_spi.c deleted file mode 100644 index 7a02eaeb7..000000000 --- a/apps/drivers/boards/px4fmu/px4fmu_spi.c +++ /dev/null @@ -1,136 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/** - * @file px4fmu_spi.c - * - * Board-specific SPI functions. - */ - -/************************************************************************************ - * Included Files - ************************************************************************************/ - -#include <nuttx/config.h> - -#include <stdint.h> -#include <stdbool.h> -#include <debug.h> - -#include <nuttx/spi.h> -#include <arch/board/board.h> - -#include "up_arch.h" -#include "chip.h" -#include "stm32_internal.h" -#include "px4fmu_internal.h" - -/************************************************************************************ - * Public Functions - ************************************************************************************/ - -/************************************************************************************ - * Name: stm32_spiinitialize - * - * Description: - * Called to configure SPI chip select GPIO pins for the PX4FMU board. - * - ************************************************************************************/ - -__EXPORT void weak_function stm32_spiinitialize(void) -{ - stm32_configgpio(GPIO_SPI_CS_GYRO); - stm32_configgpio(GPIO_SPI_CS_ACCEL); - stm32_configgpio(GPIO_SPI_CS_MPU); - stm32_configgpio(GPIO_SPI_CS_SDCARD); - - /* De-activate all peripherals, - * required for some peripheral - * state machines - */ - stm32_gpiowrite(GPIO_SPI_CS_GYRO, 1); - stm32_gpiowrite(GPIO_SPI_CS_ACCEL, 1); - stm32_gpiowrite(GPIO_SPI_CS_MPU, 1); - stm32_gpiowrite(GPIO_SPI_CS_SDCARD, 1); -} - -__EXPORT void stm32_spi1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected) -{ - /* SPI select is active low, so write !selected to select the device */ - - switch (devid) { - case PX4_SPIDEV_GYRO: - /* Making sure the other peripherals are not selected */ - stm32_gpiowrite(GPIO_SPI_CS_GYRO, !selected); - stm32_gpiowrite(GPIO_SPI_CS_MPU, 1); - stm32_gpiowrite(GPIO_SPI_CS_ACCEL, 1); - break; - - case PX4_SPIDEV_ACCEL: - /* Making sure the other peripherals are not selected */ - stm32_gpiowrite(GPIO_SPI_CS_ACCEL, !selected); - stm32_gpiowrite(GPIO_SPI_CS_MPU, 1); - stm32_gpiowrite(GPIO_SPI_CS_GYRO, 1); - break; - - case PX4_SPIDEV_MPU: - /* Making sure the other peripherals are not selected */ - stm32_gpiowrite(GPIO_SPI_CS_ACCEL, 1); - stm32_gpiowrite(GPIO_SPI_CS_GYRO, 1); - stm32_gpiowrite(GPIO_SPI_CS_MPU, !selected); - break; - - default: - break; - - } -} - -__EXPORT uint8_t stm32_spi1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid) -{ - return SPI_STATUS_PRESENT; -} - - -__EXPORT void stm32_spi3select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected) -{ - /* there can only be one device on this bus, so always select it */ - stm32_gpiowrite(GPIO_SPI_CS_SDCARD, !selected); -} - -__EXPORT uint8_t stm32_spi3status(FAR struct spi_dev_s *dev, enum spi_dev_e devid) -{ - /* this is actually bogus, but PX4 has no way to sense the presence of an SD card */ - return SPI_STATUS_PRESENT; -} - diff --git a/apps/drivers/boards/px4fmu/px4fmu_usb.c b/apps/drivers/boards/px4fmu/px4fmu_usb.c deleted file mode 100644 index b0b669fbe..000000000 --- a/apps/drivers/boards/px4fmu/px4fmu_usb.c +++ /dev/null @@ -1,108 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/** - * @file px4fmu_usb.c - * - * Board-specific USB functions. - */ - -/************************************************************************************ - * Included Files - ************************************************************************************/ - -#include <nuttx/config.h> - -#include <sys/types.h> -#include <stdint.h> -#include <stdbool.h> -#include <debug.h> - -#include <nuttx/usb/usbdev.h> -#include <nuttx/usb/usbdev_trace.h> - -#include "up_arch.h" -#include "stm32_internal.h" -#include "px4fmu_internal.h" - -/************************************************************************************ - * Definitions - ************************************************************************************/ - -/************************************************************************************ - * Private Functions - ************************************************************************************/ - -/************************************************************************************ - * Public Functions - ************************************************************************************/ - -/************************************************************************************ - * Name: stm32_usbinitialize - * - * Description: - * Called to setup USB-related GPIO pins for the PX4FMU board. - * - ************************************************************************************/ - -__EXPORT void stm32_usbinitialize(void) -{ - /* The OTG FS has an internal soft pull-up */ - - /* Configure the OTG FS VBUS sensing GPIO, Power On, and Overcurrent GPIOs */ - -#ifdef CONFIG_STM32_OTGFS - stm32_configgpio(GPIO_OTGFS_VBUS); - /* XXX We only support device mode - stm32_configgpio(GPIO_OTGFS_PWRON); - stm32_configgpio(GPIO_OTGFS_OVER); - */ -#endif -} - -/************************************************************************************ - * Name: stm32_usbsuspend - * - * Description: - * Board logic must provide the stm32_usbsuspend logic if the USBDEV driver is - * used. This function is called whenever the USB enters or leaves suspend mode. - * This is an opportunity for the board logic to shutdown clocks, power, etc. - * while the USB is suspended. - * - ************************************************************************************/ - -__EXPORT void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume) -{ - ulldbg("resume: %d\n", resume); -} - diff --git a/apps/drivers/l3gd20/Makefile b/apps/drivers/l3gd20/Makefile deleted file mode 100644 index 98e2d57c5..000000000 --- a/apps/drivers/l3gd20/Makefile +++ /dev/null @@ -1,42 +0,0 @@ -############################################################################ -# -# Copyright (C) 2012 PX4 Development Team. All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name PX4 nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -# -# Makefile to build the L3GD20 driver. -# - -APPNAME = l3gd20 -PRIORITY = SCHED_PRIORITY_DEFAULT -STACKSIZE = 2048 - -include $(APPDIR)/mk/app.mk diff --git a/apps/drivers/l3gd20/l3gd20.cpp b/apps/drivers/l3gd20/l3gd20.cpp deleted file mode 100644 index c7f433dd4..000000000 --- a/apps/drivers/l3gd20/l3gd20.cpp +++ /dev/null @@ -1,887 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/** - * @file Driver for the ST L3GD20 MEMS gyro connected via SPI. - */ - -#include <nuttx/config.h> - -#include <sys/types.h> -#include <stdint.h> -#include <stdbool.h> -#include <stddef.h> -#include <stdlib.h> -#include <semaphore.h> -#include <string.h> -#include <fcntl.h> -#include <poll.h> -#include <errno.h> -#include <stdio.h> -#include <math.h> -#include <unistd.h> - -#include <systemlib/perf_counter.h> -#include <systemlib/err.h> - -#include <nuttx/arch.h> -#include <nuttx/clock.h> - -#include <drivers/drv_hrt.h> -#include <arch/board/board.h> - -#include <drivers/device/spi.h> -#include <drivers/drv_gyro.h> - - -/* oddly, ERROR is not defined for c++ */ -#ifdef ERROR -# undef ERROR -#endif -static const int ERROR = -1; - -/* SPI protocol address bits */ -#define DIR_READ (1<<7) -#define DIR_WRITE (0<<7) -#define ADDR_INCREMENT (1<<6) - -/* register addresses */ -#define ADDR_WHO_AM_I 0x0F -#define WHO_I_AM 0xD4 - -#define ADDR_CTRL_REG1 0x20 -#define REG1_RATE_LP_MASK 0xF0 /* Mask to guard partial register update */ -/* keep lowpass low to avoid noise issues */ -#define RATE_95HZ_LP_25HZ ((0<<7) | (0<<6) | (0<<5) | (1<<4)) -#define RATE_190HZ_LP_25HZ ((0<<7) | (1<<6) | (1<<5) | (1<<4)) -#define RATE_380HZ_LP_30HZ ((1<<7) | (0<<6) | (1<<5) | (1<<4)) -#define RATE_760HZ_LP_30HZ ((1<<7) | (1<<6) | (1<<5) | (1<<4)) - -#define ADDR_CTRL_REG2 0x21 -#define ADDR_CTRL_REG3 0x22 -#define ADDR_CTRL_REG4 0x23 -#define REG4_RANGE_MASK 0x30 /* Mask to guard partial register update */ -#define RANGE_250DPS (0<<4) -#define RANGE_500DPS (1<<4) -#define RANGE_2000DPS (3<<4) - -#define ADDR_CTRL_REG5 0x24 -#define ADDR_REFERENCE 0x25 -#define ADDR_OUT_TEMP 0x26 -#define ADDR_STATUS_REG 0x27 -#define ADDR_OUT_X_L 0x28 -#define ADDR_OUT_X_H 0x29 -#define ADDR_OUT_Y_L 0x2A -#define ADDR_OUT_Y_H 0x2B -#define ADDR_OUT_Z_L 0x2C -#define ADDR_OUT_Z_H 0x2D -#define ADDR_FIFO_CTRL_REG 0x2E -#define ADDR_FIFO_SRC_REG 0x2F -#define ADDR_INT1_CFG 0x30 -#define ADDR_INT1_SRC 0x31 -#define ADDR_INT1_TSH_XH 0x32 -#define ADDR_INT1_TSH_XL 0x33 -#define ADDR_INT1_TSH_YH 0x34 -#define ADDR_INT1_TSH_YL 0x35 -#define ADDR_INT1_TSH_ZH 0x36 -#define ADDR_INT1_TSH_ZL 0x37 -#define ADDR_INT1_DURATION 0x38 - - -/* Internal configuration values */ -#define REG1_POWER_NORMAL (1<<3) -#define REG1_Z_ENABLE (1<<2) -#define REG1_Y_ENABLE (1<<1) -#define REG1_X_ENABLE (1<<0) - -#define REG4_BDU (1<<7) -#define REG4_BLE (1<<6) -//#define REG4_SPI_3WIRE (1<<0) - -#define REG5_FIFO_ENABLE (1<<6) -#define REG5_REBOOT_MEMORY (1<<7) - -#define STATUS_ZYXOR (1<<7) -#define STATUS_ZOR (1<<6) -#define STATUS_YOR (1<<5) -#define STATUS_XOR (1<<4) -#define STATUS_ZYXDA (1<<3) -#define STATUS_ZDA (1<<2) -#define STATUS_YDA (1<<1) -#define STATUS_XDA (1<<0) - -#define FIFO_CTRL_BYPASS_MODE (0<<5) -#define FIFO_CTRL_FIFO_MODE (1<<5) -#define FIFO_CTRL_STREAM_MODE (1<<6) -#define FIFO_CTRL_STREAM_TO_FIFO_MODE (3<<5) -#define FIFO_CTRL_BYPASS_TO_STREAM_MODE (1<<7) - -extern "C" { __EXPORT int l3gd20_main(int argc, char *argv[]); } - -class L3GD20 : public device::SPI -{ -public: - L3GD20(int bus, const char* path, spi_dev_e device); - virtual ~L3GD20(); - - virtual int init(); - - virtual ssize_t read(struct file *filp, char *buffer, size_t buflen); - virtual int ioctl(struct file *filp, int cmd, unsigned long arg); - - /** - * Diagnostics - print some basic information about the driver. - */ - void print_info(); - -protected: - virtual int probe(); - -private: - - struct hrt_call _call; - unsigned _call_interval; - - unsigned _num_reports; - volatile unsigned _next_report; - volatile unsigned _oldest_report; - struct gyro_report *_reports; - - struct gyro_scale _gyro_scale; - float _gyro_range_scale; - float _gyro_range_rad_s; - orb_advert_t _gyro_topic; - - unsigned _current_rate; - unsigned _current_range; - - perf_counter_t _sample_perf; - - /** - * Start automatic measurement. - */ - void start(); - - /** - * Stop automatic measurement. - */ - void stop(); - - /** - * Static trampoline from the hrt_call context; because we don't have a - * generic hrt wrapper yet. - * - * Called by the HRT in interrupt context at the specified rate if - * automatic polling is enabled. - * - * @param arg Instance pointer for the driver that is polling. - */ - static void measure_trampoline(void *arg); - - /** - * Fetch measurements from the sensor and update the report ring. - */ - void measure(); - - /** - * Read a register from the L3GD20 - * - * @param The register to read. - * @return The value that was read. - */ - uint8_t read_reg(unsigned reg); - - /** - * Write a register in the L3GD20 - * - * @param reg The register to write. - * @param value The new value to write. - */ - void write_reg(unsigned reg, uint8_t value); - - /** - * Modify a register in the L3GD20 - * - * Bits are cleared before bits are set. - * - * @param reg The register to modify. - * @param clearbits Bits in the register to clear. - * @param setbits Bits in the register to set. - */ - void modify_reg(unsigned reg, uint8_t clearbits, uint8_t setbits); - - /** - * Set the L3GD20 measurement range. - * - * @param max_dps The measurement range is set to permit reading at least - * this rate in degrees per second. - * Zero selects the maximum supported range. - * @return OK if the value can be supported, -ERANGE otherwise. - */ - int set_range(unsigned max_dps); - - /** - * Set the L3GD20 internal sampling frequency. - * - * @param frequency The internal sampling frequency is set to not less than - * this value. - * Zero selects the maximum rate supported. - * @return OK if the value can be supported. - */ - int set_samplerate(unsigned frequency); -}; - -/* helper macro for handling report buffer indices */ -#define INCREMENT(_x, _lim) do { _x++; if (_x >= _lim) _x = 0; } while(0) - - -L3GD20::L3GD20(int bus, const char* path, spi_dev_e device) : - SPI("L3GD20", path, bus, device, SPIDEV_MODE3, 8000000), - _call_interval(0), - _num_reports(0), - _next_report(0), - _oldest_report(0), - _reports(nullptr), - _gyro_range_scale(0.0f), - _gyro_range_rad_s(0.0f), - _gyro_topic(-1), - _current_rate(0), - _current_range(0), - _sample_perf(perf_alloc(PC_ELAPSED, "l3gd20_read")) -{ - // enable debug() calls - _debug_enabled = true; - - // default scale factors - _gyro_scale.x_offset = 0; - _gyro_scale.x_scale = 1.0f; - _gyro_scale.y_offset = 0; - _gyro_scale.y_scale = 1.0f; - _gyro_scale.z_offset = 0; - _gyro_scale.z_scale = 1.0f; -} - -L3GD20::~L3GD20() -{ - /* make sure we are truly inactive */ - stop(); - - /* free any existing reports */ - if (_reports != nullptr) - delete[] _reports; - - /* delete the perf counter */ - perf_free(_sample_perf); -} - -int -L3GD20::init() -{ - int ret = ERROR; - - /* do SPI init (and probe) first */ - if (SPI::init() != OK) - goto out; - - /* allocate basic report buffers */ - _num_reports = 2; - _oldest_report = _next_report = 0; - _reports = new struct gyro_report[_num_reports]; - - if (_reports == nullptr) - goto out; - - /* advertise sensor topic */ - memset(&_reports[0], 0, sizeof(_reports[0])); - _gyro_topic = orb_advertise(ORB_ID(sensor_gyro), &_reports[0]); - - /* set default configuration */ - write_reg(ADDR_CTRL_REG1, REG1_POWER_NORMAL | REG1_Z_ENABLE | REG1_Y_ENABLE | REG1_X_ENABLE); - write_reg(ADDR_CTRL_REG2, 0); /* disable high-pass filters */ - write_reg(ADDR_CTRL_REG3, 0); /* no interrupts - we don't use them */ - write_reg(ADDR_CTRL_REG4, REG4_BDU); - write_reg(ADDR_CTRL_REG5, 0); - - write_reg(ADDR_CTRL_REG5, REG5_FIFO_ENABLE); /* disable wake-on-interrupt */ - write_reg(ADDR_FIFO_CTRL_REG, FIFO_CTRL_STREAM_MODE); /* Enable FIFO, old data is overwritten */ - - set_range(500); /* default to 500dps */ - set_samplerate(0); /* max sample rate */ - - ret = OK; -out: - return ret; -} - -int -L3GD20::probe() -{ - /* read dummy value to void to clear SPI statemachine on sensor */ - (void)read_reg(ADDR_WHO_AM_I); - - /* verify that the device is attached and functioning */ - if (read_reg(ADDR_WHO_AM_I) == WHO_I_AM) - return OK; - - return -EIO; -} - -ssize_t -L3GD20::read(struct file *filp, char *buffer, size_t buflen) -{ - unsigned count = buflen / sizeof(struct gyro_report); - int ret = 0; - - /* buffer must be large enough */ - if (count < 1) - return -ENOSPC; - - /* if automatic measurement is enabled */ - if (_call_interval > 0) { - - /* - * While there is space in the caller's buffer, and reports, copy them. - * Note that we may be pre-empted by the measurement code while we are doing this; - * we are careful to avoid racing with it. - */ - while (count--) { - if (_oldest_report != _next_report) { - memcpy(buffer, _reports + _oldest_report, sizeof(*_reports)); - ret += sizeof(_reports[0]); - INCREMENT(_oldest_report, _num_reports); - } - } - - /* if there was no data, warn the caller */ - return ret ? ret : -EAGAIN; - } - - /* manual measurement */ - _oldest_report = _next_report = 0; - measure(); - - /* measurement will have generated a report, copy it out */ - memcpy(buffer, _reports, sizeof(*_reports)); - ret = sizeof(*_reports); - - return ret; -} - -int -L3GD20::ioctl(struct file *filp, int cmd, unsigned long arg) -{ - switch (cmd) { - - case SENSORIOCSPOLLRATE: { - switch (arg) { - - /* switching to manual polling */ - case SENSOR_POLLRATE_MANUAL: - stop(); - _call_interval = 0; - return OK; - - /* external signalling not supported */ - case SENSOR_POLLRATE_EXTERNAL: - - /* zero would be bad */ - case 0: - return -EINVAL; - - /* set default/max polling rate */ - case SENSOR_POLLRATE_MAX: - case SENSOR_POLLRATE_DEFAULT: - /* With internal low pass filters enabled, 250 Hz is sufficient */ - return ioctl(filp, SENSORIOCSPOLLRATE, 250); - - /* adjust to a legal polling interval in Hz */ - default: { - /* do we need to start internal polling? */ - bool want_start = (_call_interval == 0); - - /* convert hz to hrt interval via microseconds */ - unsigned ticks = 1000000 / arg; - - /* check against maximum sane rate */ - if (ticks < 1000) - return -EINVAL; - - /* update interval for next measurement */ - /* XXX this is a bit shady, but no other way to adjust... */ - _call.period = _call_interval = ticks; - - /* if we need to start the poll state machine, do it */ - if (want_start) - start(); - - return OK; - } - } - } - - case SENSORIOCGPOLLRATE: - if (_call_interval == 0) - return SENSOR_POLLRATE_MANUAL; - - return 1000000 / _call_interval; - - case SENSORIOCSQUEUEDEPTH: { - /* account for sentinel in the ring */ - arg++; - - /* lower bound is mandatory, upper bound is a sanity check */ - if ((arg < 2) || (arg > 100)) - return -EINVAL; - - /* allocate new buffer */ - struct gyro_report *buf = new struct gyro_report[arg]; - - if (nullptr == buf) - return -ENOMEM; - - /* reset the measurement state machine with the new buffer, free the old */ - stop(); - delete[] _reports; - _num_reports = arg; - _reports = buf; - start(); - - return OK; - } - - case SENSORIOCGQUEUEDEPTH: - return _num_reports - 1; - - case SENSORIOCRESET: - /* XXX implement */ - return -EINVAL; - - case GYROIOCSSAMPLERATE: - return set_samplerate(arg); - - case GYROIOCGSAMPLERATE: - return _current_rate; - - case GYROIOCSLOWPASS: - case GYROIOCGLOWPASS: - /* XXX not implemented due to wacky interaction with samplerate */ - return -EINVAL; - - case GYROIOCSSCALE: - /* copy scale in */ - memcpy(&_gyro_scale, (struct gyro_scale *) arg, sizeof(_gyro_scale)); - return OK; - - case GYROIOCGSCALE: - /* copy scale out */ - memcpy((struct gyro_scale *) arg, &_gyro_scale, sizeof(_gyro_scale)); - return OK; - - case GYROIOCSRANGE: - return set_range(arg); - - case GYROIOCGRANGE: - return _current_range; - - default: - /* give it to the superclass */ - return SPI::ioctl(filp, cmd, arg); - } -} - -uint8_t -L3GD20::read_reg(unsigned reg) -{ - uint8_t cmd[2]; - - cmd[0] = reg | DIR_READ; - - transfer(cmd, cmd, sizeof(cmd)); - - return cmd[1]; -} - -void -L3GD20::write_reg(unsigned reg, uint8_t value) -{ - uint8_t cmd[2]; - - cmd[0] = reg | DIR_WRITE; - cmd[1] = value; - - transfer(cmd, nullptr, sizeof(cmd)); -} - -void -L3GD20::modify_reg(unsigned reg, uint8_t clearbits, uint8_t setbits) -{ - uint8_t val; - - val = read_reg(reg); - val &= ~clearbits; - val |= setbits; - write_reg(reg, val); -} - -int -L3GD20::set_range(unsigned max_dps) -{ - uint8_t bits = REG4_BDU; - - if (max_dps == 0) - max_dps = 2000; - - if (max_dps <= 250) { - _current_range = 250; - bits |= RANGE_250DPS; - - } else if (max_dps <= 500) { - _current_range = 500; - bits |= RANGE_500DPS; - - } else if (max_dps <= 2000) { - _current_range = 2000; - bits |= RANGE_2000DPS; - - } else { - return -EINVAL; - } - - _gyro_range_rad_s = _current_range / 180.0f * M_PI_F; - _gyro_range_scale = _gyro_range_rad_s / 32768.0f; - write_reg(ADDR_CTRL_REG4, bits); - - return OK; -} - -int -L3GD20::set_samplerate(unsigned frequency) -{ - uint8_t bits = REG1_POWER_NORMAL | REG1_Z_ENABLE | REG1_Y_ENABLE | REG1_X_ENABLE; - - if (frequency == 0) - frequency = 760; - - if (frequency <= 95) { - _current_rate = 95; - bits |= RATE_95HZ_LP_25HZ; - - } else if (frequency <= 190) { - _current_rate = 190; - bits |= RATE_190HZ_LP_25HZ; - - } else if (frequency <= 380) { - _current_rate = 380; - bits |= RATE_380HZ_LP_30HZ; - - } else if (frequency <= 760) { - _current_rate = 760; - bits |= RATE_760HZ_LP_30HZ; - - } else { - return -EINVAL; - } - - write_reg(ADDR_CTRL_REG1, bits); - - return OK; -} - -void -L3GD20::start() -{ - /* make sure we are stopped first */ - stop(); - - /* reset the report ring */ - _oldest_report = _next_report = 0; - - /* start polling at the specified rate */ - hrt_call_every(&_call, 1000, _call_interval, (hrt_callout)&L3GD20::measure_trampoline, this); -} - -void -L3GD20::stop() -{ - hrt_cancel(&_call); -} - -void -L3GD20::measure_trampoline(void *arg) -{ - L3GD20 *dev = (L3GD20 *)arg; - - /* make another measurement */ - dev->measure(); -} - -void -L3GD20::measure() -{ - /* status register and data as read back from the device */ -#pragma pack(push, 1) - struct { - uint8_t cmd; - uint8_t temp; - uint8_t status; - int16_t x; - int16_t y; - int16_t z; - } raw_report; -#pragma pack(pop) - - gyro_report *report = &_reports[_next_report]; - - /* start the performance counter */ - perf_begin(_sample_perf); - - /* fetch data from the sensor */ - raw_report.cmd = ADDR_OUT_TEMP | DIR_READ | ADDR_INCREMENT; - transfer((uint8_t *)&raw_report, (uint8_t *)&raw_report, sizeof(raw_report)); - - /* - * 1) Scale raw value to SI units using scaling from datasheet. - * 2) Subtract static offset (in SI units) - * 3) Scale the statically calibrated values with a linear - * dynamically obtained factor - * - * Note: the static sensor offset is the number the sensor outputs - * at a nominally 'zero' input. Therefore the offset has to - * be subtracted. - * - * Example: A gyro outputs a value of 74 at zero angular rate - * the offset is 74 from the origin and subtracting - * 74 from all measurements centers them around zero. - */ - report->timestamp = hrt_absolute_time(); - - /* swap x and y and negate y */ - report->x_raw = raw_report.y; - report->y_raw = ((raw_report.x == -32768) ? 32767 : -raw_report.x); - report->z_raw = raw_report.z; - - report->x = ((report->x_raw * _gyro_range_scale) - _gyro_scale.x_offset) * _gyro_scale.x_scale; - report->y = ((report->y_raw * _gyro_range_scale) - _gyro_scale.y_offset) * _gyro_scale.y_scale; - report->z = ((report->z_raw * _gyro_range_scale) - _gyro_scale.z_offset) * _gyro_scale.z_scale; - report->scaling = _gyro_range_scale; - report->range_rad_s = _gyro_range_rad_s; - - /* post a report to the ring - note, not locked */ - INCREMENT(_next_report, _num_reports); - - /* if we are running up against the oldest report, fix it */ - if (_next_report == _oldest_report) - INCREMENT(_oldest_report, _num_reports); - - /* notify anyone waiting for data */ - poll_notify(POLLIN); - - /* publish for subscribers */ - orb_publish(ORB_ID(sensor_gyro), _gyro_topic, report); - - /* stop the perf counter */ - perf_end(_sample_perf); -} - -void -L3GD20::print_info() -{ - perf_print_counter(_sample_perf); - printf("report queue: %u (%u/%u @ %p)\n", - _num_reports, _oldest_report, _next_report, _reports); -} - -/** - * Local functions in support of the shell command. - */ -namespace l3gd20 -{ - -L3GD20 *g_dev; - -void start(); -void test(); -void reset(); -void info(); - -/** - * Start the driver. - */ -void -start() -{ - int fd; - - if (g_dev != nullptr) - errx(1, "already started"); - - /* create the driver */ - g_dev = new L3GD20(1 /* XXX magic number */, GYRO_DEVICE_PATH, (spi_dev_e)PX4_SPIDEV_GYRO); - - if (g_dev == nullptr) - goto fail; - - if (OK != g_dev->init()) - goto fail; - - /* set the poll rate to default, starts automatic data collection */ - fd = open(GYRO_DEVICE_PATH, O_RDONLY); - - if (fd < 0) - goto fail; - - if (ioctl(fd, SENSORIOCSPOLLRATE, SENSOR_POLLRATE_DEFAULT) < 0) - goto fail; - - exit(0); -fail: - - if (g_dev != nullptr) { - delete g_dev; - g_dev = nullptr; - } - - errx(1, "driver start failed"); -} - -/** - * Perform some basic functional tests on the driver; - * make sure we can collect data from the sensor in polled - * and automatic modes. - */ -void -test() -{ - int fd_gyro = -1; - struct gyro_report g_report; - ssize_t sz; - - /* get the driver */ - fd_gyro = open(GYRO_DEVICE_PATH, O_RDONLY); - - if (fd_gyro < 0) - err(1, "%s open failed", GYRO_DEVICE_PATH); - - /* reset to manual polling */ - if (ioctl(fd_gyro, SENSORIOCSPOLLRATE, SENSOR_POLLRATE_MANUAL) < 0) - err(1, "reset to manual polling"); - - /* do a simple demand read */ - sz = read(fd_gyro, &g_report, sizeof(g_report)); - - if (sz != sizeof(g_report)) - err(1, "immediate gyro read failed"); - - warnx("gyro x: \t% 9.5f\trad/s", (double)g_report.x); - warnx("gyro y: \t% 9.5f\trad/s", (double)g_report.y); - warnx("gyro z: \t% 9.5f\trad/s", (double)g_report.z); - warnx("gyro x: \t%d\traw", (int)g_report.x_raw); - warnx("gyro y: \t%d\traw", (int)g_report.y_raw); - warnx("gyro z: \t%d\traw", (int)g_report.z_raw); - warnx("gyro range: %8.4f rad/s (%d deg/s)", (double)g_report.range_rad_s, - (int)((g_report.range_rad_s / M_PI_F) * 180.0f + 0.5f)); - - /* XXX add poll-rate tests here too */ - - reset(); - errx(0, "PASS"); -} - -/** - * Reset the driver. - */ -void -reset() -{ - int fd = open(GYRO_DEVICE_PATH, O_RDONLY); - - if (fd < 0) - err(1, "failed "); - - if (ioctl(fd, SENSORIOCRESET, 0) < 0) - err(1, "driver reset failed"); - - if (ioctl(fd, SENSORIOCSPOLLRATE, SENSOR_POLLRATE_DEFAULT) < 0) - err(1, "driver poll restart failed"); - - exit(0); -} - -/** - * Print a little info about the driver. - */ -void -info() -{ - if (g_dev == nullptr) - errx(1, "driver not running\n"); - - printf("state @ %p\n", g_dev); - g_dev->print_info(); - - exit(0); -} - - -} // namespace - -int -l3gd20_main(int argc, char *argv[]) -{ - /* - * Start/load the driver. - - */ - if (!strcmp(argv[1], "start")) - l3gd20::start(); - - /* - * Test the driver/device. - */ - if (!strcmp(argv[1], "test")) - l3gd20::test(); - - /* - * Reset the driver. - */ - if (!strcmp(argv[1], "reset")) - l3gd20::reset(); - - /* - * Print driver information. - */ - if (!strcmp(argv[1], "info")) - l3gd20::info(); - - errx(1, "unrecognized command, try 'start', 'test', 'reset' or 'info'"); -} diff --git a/apps/drivers/px4fmu/Makefile b/apps/drivers/px4fmu/Makefile deleted file mode 100644 index 7f7c2a732..000000000 --- a/apps/drivers/px4fmu/Makefile +++ /dev/null @@ -1,44 +0,0 @@ -############################################################################ -# -# Copyright (C) 2012 PX4 Development Team. All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name PX4 nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -# -# Interface driver for the PX4FMU board -# - -APPNAME = fmu -PRIORITY = SCHED_PRIORITY_DEFAULT -STACKSIZE = 2048 - -INCLUDES = $(TOPDIR)/arch/arm/src/stm32 $(TOPDIR)/arch/arm/src/common - -include $(APPDIR)/mk/app.mk diff --git a/apps/drivers/px4fmu/fmu.cpp b/apps/drivers/px4fmu/fmu.cpp deleted file mode 100644 index e54724536..000000000 --- a/apps/drivers/px4fmu/fmu.cpp +++ /dev/null @@ -1,1084 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/** - * @file fmu.cpp - * - * Driver/configurator for the PX4 FMU multi-purpose port. - */ - -#include <nuttx/config.h> - -#include <sys/types.h> -#include <stdint.h> -#include <stdbool.h> -#include <stdlib.h> -#include <semaphore.h> -#include <string.h> -#include <fcntl.h> -#include <poll.h> -#include <errno.h> -#include <stdio.h> -#include <math.h> -#include <unistd.h> - -#include <nuttx/arch.h> - -#include <drivers/device/device.h> -#include <drivers/drv_pwm_output.h> -#include <drivers/drv_gpio.h> -#include <drivers/boards/px4fmu/px4fmu_internal.h> -#include <drivers/drv_hrt.h> - -#include <systemlib/systemlib.h> -#include <systemlib/err.h> -#include <systemlib/mixer/mixer.h> -#include <drivers/drv_mixer.h> -#include <drivers/drv_rc_input.h> - -#include <uORB/topics/actuator_controls.h> -#include <uORB/topics/actuator_controls_effective.h> -#include <uORB/topics/actuator_outputs.h> - -#include <systemlib/err.h> -#include <systemlib/ppm_decode.h> - -class PX4FMU : public device::CDev -{ -public: - enum Mode { - MODE_2PWM, - MODE_4PWM, - MODE_NONE - }; - PX4FMU(); - virtual ~PX4FMU(); - - virtual int ioctl(file *filp, int cmd, unsigned long arg); - virtual ssize_t write(file *filp, const char *buffer, size_t len); - - virtual int init(); - - int set_mode(Mode mode); - - int set_pwm_alt_rate(unsigned rate); - int set_pwm_alt_channels(uint32_t channels); - -private: - static const unsigned _max_actuators = 4; - - Mode _mode; - unsigned _pwm_default_rate; - unsigned _pwm_alt_rate; - uint32_t _pwm_alt_rate_channels; - unsigned _current_update_rate; - int _task; - int _t_actuators; - int _t_armed; - orb_advert_t _t_outputs; - orb_advert_t _t_actuators_effective; - unsigned _num_outputs; - bool _primary_pwm_device; - - volatile bool _task_should_exit; - bool _armed; - - MixerGroup *_mixers; - - actuator_controls_s _controls; - - static void task_main_trampoline(int argc, char *argv[]); - void task_main() __attribute__((noreturn)); - - static int control_callback(uintptr_t handle, - uint8_t control_group, - uint8_t control_index, - float &input); - - int set_pwm_rate(unsigned rate_map, unsigned default_rate, unsigned alt_rate); - int pwm_ioctl(file *filp, int cmd, unsigned long arg); - - struct GPIOConfig { - uint32_t input; - uint32_t output; - uint32_t alt; - }; - - static const GPIOConfig _gpio_tab[]; - static const unsigned _ngpio; - - void gpio_reset(void); - void gpio_set_function(uint32_t gpios, int function); - void gpio_write(uint32_t gpios, int function); - uint32_t gpio_read(void); - int gpio_ioctl(file *filp, int cmd, unsigned long arg); - -}; - -const PX4FMU::GPIOConfig PX4FMU::_gpio_tab[] = { - {GPIO_GPIO0_INPUT, GPIO_GPIO0_OUTPUT, 0}, - {GPIO_GPIO1_INPUT, GPIO_GPIO1_OUTPUT, 0}, - {GPIO_GPIO2_INPUT, GPIO_GPIO2_OUTPUT, GPIO_USART2_CTS_1}, - {GPIO_GPIO3_INPUT, GPIO_GPIO3_OUTPUT, GPIO_USART2_RTS_1}, - {GPIO_GPIO4_INPUT, GPIO_GPIO4_OUTPUT, GPIO_USART2_TX_1}, - {GPIO_GPIO5_INPUT, GPIO_GPIO5_OUTPUT, GPIO_USART2_RX_1}, - {GPIO_GPIO6_INPUT, GPIO_GPIO6_OUTPUT, GPIO_CAN2_TX_2}, - {GPIO_GPIO7_INPUT, GPIO_GPIO7_OUTPUT, GPIO_CAN2_RX_2}, -}; - -const unsigned PX4FMU::_ngpio = sizeof(PX4FMU::_gpio_tab) / sizeof(PX4FMU::_gpio_tab[0]); - -namespace -{ - -PX4FMU *g_fmu; - -} // namespace - -PX4FMU::PX4FMU() : - CDev("fmuservo", "/dev/px4fmu"), - _mode(MODE_NONE), - _pwm_default_rate(50), - _pwm_alt_rate(50), - _pwm_alt_rate_channels(0), - _current_update_rate(0), - _task(-1), - _t_actuators(-1), - _t_armed(-1), - _t_outputs(0), - _t_actuators_effective(0), - _num_outputs(0), - _primary_pwm_device(false), - _task_should_exit(false), - _armed(false), - _mixers(nullptr) -{ - _debug_enabled = true; -} - -PX4FMU::~PX4FMU() -{ - if (_task != -1) { - /* tell the task we want it to go away */ - _task_should_exit = true; - - unsigned i = 10; - - do { - /* wait 50ms - it should wake every 100ms or so worst-case */ - usleep(50000); - - /* if we have given up, kill it */ - if (--i == 0) { - task_delete(_task); - break; - } - - } while (_task != -1); - } - - /* clean up the alternate device node */ - if (_primary_pwm_device) - unregister_driver(PWM_OUTPUT_DEVICE_PATH); - - g_fmu = nullptr; -} - -int -PX4FMU::init() -{ - int ret; - - ASSERT(_task == -1); - - /* do regular cdev init */ - ret = CDev::init(); - - if (ret != OK) - return ret; - - /* try to claim the generic PWM output device node as well - it's OK if we fail at this */ - ret = register_driver(PWM_OUTPUT_DEVICE_PATH, &fops, 0666, (void *)this); - - if (ret == OK) { - log("default PWM output device"); - _primary_pwm_device = true; - } - - /* reset GPIOs */ - gpio_reset(); - - /* start the IO interface task */ - _task = task_spawn("fmuservo", - SCHED_DEFAULT, - SCHED_PRIORITY_DEFAULT, - 2048, - (main_t)&PX4FMU::task_main_trampoline, - nullptr); - - if (_task < 0) { - debug("task start failed: %d", errno); - return -errno; - } - - return OK; -} - -void -PX4FMU::task_main_trampoline(int argc, char *argv[]) -{ - g_fmu->task_main(); -} - -int -PX4FMU::set_mode(Mode mode) -{ - /* - * Configure for PWM output. - * - * Note that regardless of the configured mode, the task is always - * listening and mixing; the mode just selects which of the channels - * are presented on the output pins. - */ - switch (mode) { - case MODE_2PWM: // multi-port with flow control lines as PWM - case MODE_4PWM: // multi-port as 4 PWM outs - debug("MODE_%dPWM", (mode == MODE_2PWM) ? 2 : 4); - - /* default output rates */ - _pwm_default_rate = 50; - _pwm_alt_rate = 50; - _pwm_alt_rate_channels = 0; - - /* XXX magic numbers */ - up_pwm_servo_init((mode == MODE_2PWM) ? 0x3 : 0xf); - set_pwm_rate(_pwm_alt_rate_channels, _pwm_default_rate, _pwm_alt_rate); - - break; - - case MODE_NONE: - debug("MODE_NONE"); - - _pwm_default_rate = 10; /* artificially reduced output rate */ - _pwm_alt_rate = 10; - _pwm_alt_rate_channels = 0; - - /* disable servo outputs - no need to set rates */ - up_pwm_servo_deinit(); - - break; - - default: - return -EINVAL; - } - - _mode = mode; - return OK; -} - -int -PX4FMU::set_pwm_rate(uint32_t rate_map, unsigned default_rate, unsigned alt_rate) -{ - debug("set_pwm_rate %x %u %u", rate_map, default_rate, alt_rate); - - for (unsigned pass = 0; pass < 2; pass++) { - for (unsigned group = 0; group < _max_actuators; group++) { - - // get the channel mask for this rate group - uint32_t mask = up_pwm_servo_get_rate_group(group); - if (mask == 0) - continue; - - // all channels in the group must be either default or alt-rate - uint32_t alt = rate_map & mask; - - if (pass == 0) { - // preflight - if ((alt != 0) && (alt != mask)) { - warn("rate group %u mask %x bad overlap %x", group, mask, alt); - // not a legal map, bail - return -EINVAL; - } - } else { - // set it - errors here are unexpected - if (alt != 0) { - if (up_pwm_servo_set_rate_group_update(group, _pwm_alt_rate) != OK) { - warn("rate group set alt failed"); - return -EINVAL; - } - } else { - if (up_pwm_servo_set_rate_group_update(group, _pwm_default_rate) != OK) { - warn("rate group set default failed"); - return -EINVAL; - } - } - } - } - } - _pwm_alt_rate_channels = rate_map; - _pwm_default_rate = default_rate; - _pwm_alt_rate = alt_rate; - - return OK; -} - -int -PX4FMU::set_pwm_alt_rate(unsigned rate) -{ - return set_pwm_rate(_pwm_alt_rate_channels, _pwm_default_rate, rate); -} - -int -PX4FMU::set_pwm_alt_channels(uint32_t channels) -{ - return set_pwm_rate(channels, _pwm_default_rate, _pwm_alt_rate); -} - -void -PX4FMU::task_main() -{ - /* - * Subscribe to the appropriate PWM output topic based on whether we are the - * primary PWM output or not. - */ - _t_actuators = orb_subscribe(_primary_pwm_device ? ORB_ID_VEHICLE_ATTITUDE_CONTROLS : - ORB_ID(actuator_controls_1)); - /* force a reset of the update rate */ - _current_update_rate = 0; - - _t_armed = orb_subscribe(ORB_ID(actuator_armed)); - orb_set_interval(_t_armed, 200); /* 5Hz update rate */ - - /* advertise the mixed control outputs */ - actuator_outputs_s outputs; - memset(&outputs, 0, sizeof(outputs)); - /* advertise the mixed control outputs */ - _t_outputs = orb_advertise(_primary_pwm_device ? ORB_ID_VEHICLE_CONTROLS : ORB_ID(actuator_outputs_1), - &outputs); - - /* advertise the effective control inputs */ - actuator_controls_effective_s controls_effective; - memset(&controls_effective, 0, sizeof(controls_effective)); - /* advertise the effective control inputs */ - _t_actuators_effective = orb_advertise(_primary_pwm_device ? ORB_ID_VEHICLE_ATTITUDE_CONTROLS_EFFECTIVE : ORB_ID(actuator_controls_effective_1), - &controls_effective); - - pollfd fds[2]; - fds[0].fd = _t_actuators; - fds[0].events = POLLIN; - fds[1].fd = _t_armed; - fds[1].events = POLLIN; - - unsigned num_outputs = (_mode == MODE_2PWM) ? 2 : 4; - - // rc input, published to ORB - struct rc_input_values rc_in; - orb_advert_t to_input_rc = 0; - - memset(&rc_in, 0, sizeof(rc_in)); - rc_in.input_source = RC_INPUT_SOURCE_PX4FMU_PPM; - - log("starting"); - - /* loop until killed */ - while (!_task_should_exit) { - - /* - * Adjust actuator topic update rate to keep up with - * the highest servo update rate configured. - * - * We always mix at max rate; some channels may update slower. - */ - unsigned max_rate = (_pwm_default_rate > _pwm_alt_rate) ? _pwm_default_rate : _pwm_alt_rate; - if (_current_update_rate != max_rate) { - _current_update_rate = max_rate; - int update_rate_in_ms = int(1000 / _current_update_rate); - - /* reject faster than 500 Hz updates */ - if (update_rate_in_ms < 2) { - update_rate_in_ms = 2; - } - /* reject slower than 10 Hz updates */ - if (update_rate_in_ms > 100) { - update_rate_in_ms = 100; - } - - debug("adjusted actuator update interval to %ums", update_rate_in_ms); - orb_set_interval(_t_actuators, update_rate_in_ms); - - // set to current max rate, even if we are actually checking slower/faster - _current_update_rate = max_rate; - } - - /* sleep waiting for data, stopping to check for PPM - * input at 100Hz */ - int ret = ::poll(&fds[0], 2, 10); - - /* this would be bad... */ - if (ret < 0) { - log("poll error %d", errno); - usleep(1000000); - continue; - } - - /* do we have a control update? */ - if (fds[0].revents & POLLIN) { - - /* get controls - must always do this to avoid spinning */ - orb_copy(ORB_ID_VEHICLE_ATTITUDE_CONTROLS, _t_actuators, &_controls); - - /* can we mix? */ - if (_mixers != nullptr) { - - /* do mixing */ - outputs.noutputs = _mixers->mix(&outputs.output[0], num_outputs); - outputs.timestamp = hrt_absolute_time(); - - // XXX output actual limited values - memcpy(&controls_effective, &_controls, sizeof(controls_effective)); - - orb_publish(_primary_pwm_device ? ORB_ID_VEHICLE_ATTITUDE_CONTROLS_EFFECTIVE : ORB_ID(actuator_controls_effective_1), _t_actuators_effective, &controls_effective); - - /* iterate actuators */ - for (unsigned i = 0; i < num_outputs; i++) { - - /* last resort: catch NaN, INF and out-of-band errors */ - if (i < outputs.noutputs && - isfinite(outputs.output[i]) && - outputs.output[i] >= -1.0f && - outputs.output[i] <= 1.0f) { - /* scale for PWM output 900 - 2100us */ - outputs.output[i] = 1500 + (600 * outputs.output[i]); - } else { - /* - * Value is NaN, INF or out of band - set to the minimum value. - * This will be clearly visible on the servo status and will limit the risk of accidentally - * spinning motors. It would be deadly in flight. - */ - outputs.output[i] = 900; - } - - /* output to the servo */ - up_pwm_servo_set(i, outputs.output[i]); - } - - /* and publish for anyone that cares to see */ - orb_publish(_primary_pwm_device ? ORB_ID_VEHICLE_CONTROLS : ORB_ID(actuator_outputs_1), _t_outputs, &outputs); - } - } - - /* how about an arming update? */ - if (fds[1].revents & POLLIN) { - actuator_armed_s aa; - - /* get new value */ - orb_copy(ORB_ID(actuator_armed), _t_armed, &aa); - - /* update PWM servo armed status if armed and not locked down */ - up_pwm_servo_arm(aa.armed && !aa.lockdown); - } - - // see if we have new PPM input data - if (ppm_last_valid_decode != rc_in.timestamp) { - // we have a new PPM frame. Publish it. - rc_in.channel_count = ppm_decoded_channels; - if (rc_in.channel_count > RC_INPUT_MAX_CHANNELS) { - rc_in.channel_count = RC_INPUT_MAX_CHANNELS; - } - for (uint8_t i=0; i<rc_in.channel_count; i++) { - rc_in.values[i] = ppm_buffer[i]; - } - rc_in.timestamp = ppm_last_valid_decode; - - /* lazily advertise on first publication */ - if (to_input_rc == 0) { - to_input_rc = orb_advertise(ORB_ID(input_rc), &rc_in); - } else { - orb_publish(ORB_ID(input_rc), to_input_rc, &rc_in); - } - } - } - - ::close(_t_actuators); - ::close(_t_actuators_effective); - ::close(_t_armed); - - /* make sure servos are off */ - up_pwm_servo_deinit(); - - log("stopping"); - - /* note - someone else is responsible for restoring the GPIO config */ - - /* tell the dtor that we are exiting */ - _task = -1; - _exit(0); -} - -int -PX4FMU::control_callback(uintptr_t handle, - uint8_t control_group, - uint8_t control_index, - float &input) -{ - const actuator_controls_s *controls = (actuator_controls_s *)handle; - - input = controls->control[control_index]; - return 0; -} - -int -PX4FMU::ioctl(file *filp, int cmd, unsigned long arg) -{ - int ret; - - // XXX disabled, confusing users - //debug("ioctl 0x%04x 0x%08x", cmd, arg); - - /* try it as a GPIO ioctl first */ - ret = gpio_ioctl(filp, cmd, arg); - - if (ret != -ENOTTY) - return ret; - - /* if we are in valid PWM mode, try it as a PWM ioctl as well */ - switch (_mode) { - case MODE_2PWM: - case MODE_4PWM: - ret = pwm_ioctl(filp, cmd, arg); - break; - - default: - debug("not in a PWM mode"); - break; - } - - /* if nobody wants it, let CDev have it */ - if (ret == -ENOTTY) - ret = CDev::ioctl(filp, cmd, arg); - - return ret; -} - -int -PX4FMU::pwm_ioctl(file *filp, int cmd, unsigned long arg) -{ - int ret = OK; - - lock(); - - switch (cmd) { - case PWM_SERVO_ARM: - up_pwm_servo_arm(true); - break; - - case PWM_SERVO_DISARM: - up_pwm_servo_arm(false); - break; - - case PWM_SERVO_SET_UPDATE_RATE: - ret = set_pwm_rate(_pwm_alt_rate_channels, _pwm_default_rate, arg); - break; - - case PWM_SERVO_SELECT_UPDATE_RATE: - ret = set_pwm_rate(arg, _pwm_default_rate, _pwm_alt_rate); - break; - - case PWM_SERVO_SET(2): - case PWM_SERVO_SET(3): - if (_mode != MODE_4PWM) { - ret = -EINVAL; - break; - } - - /* FALLTHROUGH */ - case PWM_SERVO_SET(0): - case PWM_SERVO_SET(1): - if (arg < 2100) { - up_pwm_servo_set(cmd - PWM_SERVO_SET(0), arg); - } else { - ret = -EINVAL; - } - - break; - - case PWM_SERVO_GET(2): - case PWM_SERVO_GET(3): - if (_mode != MODE_4PWM) { - ret = -EINVAL; - break; - } - - /* FALLTHROUGH */ - case PWM_SERVO_GET(0): - case PWM_SERVO_GET(1): - *(servo_position_t *)arg = up_pwm_servo_get(cmd - PWM_SERVO_GET(0)); - break; - - case PWM_SERVO_GET_RATEGROUP(0): - case PWM_SERVO_GET_RATEGROUP(1): - case PWM_SERVO_GET_RATEGROUP(2): - case PWM_SERVO_GET_RATEGROUP(3): - *(uint32_t *)arg = up_pwm_servo_get_rate_group(cmd - PWM_SERVO_GET_RATEGROUP(0)); - break; - - case PWM_SERVO_GET_COUNT: - case MIXERIOCGETOUTPUTCOUNT: - if (_mode == MODE_4PWM) { - *(unsigned *)arg = 4; - - } else { - *(unsigned *)arg = 2; - } - - break; - - case MIXERIOCRESET: - if (_mixers != nullptr) { - delete _mixers; - _mixers = nullptr; - } - - break; - - case MIXERIOCADDSIMPLE: { - mixer_simple_s *mixinfo = (mixer_simple_s *)arg; - - SimpleMixer *mixer = new SimpleMixer(control_callback, - (uintptr_t)&_controls, mixinfo); - - if (mixer->check()) { - delete mixer; - ret = -EINVAL; - - } else { - if (_mixers == nullptr) - _mixers = new MixerGroup(control_callback, - (uintptr_t)&_controls); - - _mixers->add_mixer(mixer); - } - - break; - } - - case MIXERIOCLOADBUF: { - const char *buf = (const char *)arg; - unsigned buflen = strnlen(buf, 1024); - - if (_mixers == nullptr) - _mixers = new MixerGroup(control_callback, (uintptr_t)&_controls); - - if (_mixers == nullptr) { - ret = -ENOMEM; - - } else { - - ret = _mixers->load_from_buf(buf, buflen); - - if (ret != 0) { - debug("mixer load failed with %d", ret); - delete _mixers; - _mixers = nullptr; - ret = -EINVAL; - } - } - break; - } - - default: - ret = -ENOTTY; - break; - } - - unlock(); - - return ret; -} - -/* - this implements PWM output via a write() method, for compatibility - with px4io - */ -ssize_t -PX4FMU::write(file *filp, const char *buffer, size_t len) -{ - unsigned count = len / 2; - uint16_t values[4]; - - if (count > 4) { - // we only have 4 PWM outputs on the FMU - count = 4; - } - - // allow for misaligned values - memcpy(values, buffer, count*2); - - for (uint8_t i=0; i<count; i++) { - up_pwm_servo_set(i, values[i]); - } - return count * 2; -} - -void -PX4FMU::gpio_reset(void) -{ - /* - * Setup default GPIO config - all pins as GPIOs, GPIO driver chip - * to input mode. - */ - for (unsigned i = 0; i < _ngpio; i++) - stm32_configgpio(_gpio_tab[i].input); - - stm32_gpiowrite(GPIO_GPIO_DIR, 0); - stm32_configgpio(GPIO_GPIO_DIR); -} - -void -PX4FMU::gpio_set_function(uint32_t gpios, int function) -{ - /* - * GPIOs 0 and 1 must have the same direction as they are buffered - * by a shared 2-port driver. Any attempt to set either sets both. - */ - if (gpios & 3) { - gpios |= 3; - - /* flip the buffer to output mode if required */ - if (GPIO_SET_OUTPUT == function) - stm32_gpiowrite(GPIO_GPIO_DIR, 1); - } - - /* configure selected GPIOs as required */ - for (unsigned i = 0; i < _ngpio; i++) { - if (gpios & (1 << i)) { - switch (function) { - case GPIO_SET_INPUT: - stm32_configgpio(_gpio_tab[i].input); - break; - - case GPIO_SET_OUTPUT: - stm32_configgpio(_gpio_tab[i].output); - break; - - case GPIO_SET_ALT_1: - if (_gpio_tab[i].alt != 0) - stm32_configgpio(_gpio_tab[i].alt); - - break; - } - } - } - - /* flip buffer to input mode if required */ - if ((GPIO_SET_INPUT == function) && (gpios & 3)) - stm32_gpiowrite(GPIO_GPIO_DIR, 0); -} - -void -PX4FMU::gpio_write(uint32_t gpios, int function) -{ - int value = (function == GPIO_SET) ? 1 : 0; - - for (unsigned i = 0; i < _ngpio; i++) - if (gpios & (1 << i)) - stm32_gpiowrite(_gpio_tab[i].output, value); -} - -uint32_t -PX4FMU::gpio_read(void) -{ - uint32_t bits = 0; - - for (unsigned i = 0; i < _ngpio; i++) - if (stm32_gpioread(_gpio_tab[i].input)) - bits |= (1 << i); - - return bits; -} - -int -PX4FMU::gpio_ioctl(struct file *filp, int cmd, unsigned long arg) -{ - int ret = OK; - - lock(); - - switch (cmd) { - - case GPIO_RESET: - gpio_reset(); - break; - - case GPIO_SET_OUTPUT: - case GPIO_SET_INPUT: - case GPIO_SET_ALT_1: - gpio_set_function(arg, cmd); - break; - - case GPIO_SET_ALT_2: - case GPIO_SET_ALT_3: - case GPIO_SET_ALT_4: - ret = -EINVAL; - break; - - case GPIO_SET: - case GPIO_CLEAR: - gpio_write(arg, cmd); - break; - - case GPIO_GET: - *(uint32_t *)arg = gpio_read(); - break; - - default: - ret = -ENOTTY; - } - - unlock(); - - return ret; -} - -namespace -{ - -enum PortMode { - PORT_MODE_UNSET = 0, - PORT_FULL_GPIO, - PORT_FULL_SERIAL, - PORT_FULL_PWM, - PORT_GPIO_AND_SERIAL, - PORT_PWM_AND_SERIAL, - PORT_PWM_AND_GPIO, -}; - -PortMode g_port_mode; - -int -fmu_new_mode(PortMode new_mode) -{ - uint32_t gpio_bits; - PX4FMU::Mode servo_mode; - - /* reset to all-inputs */ - g_fmu->ioctl(0, GPIO_RESET, 0); - - gpio_bits = 0; - servo_mode = PX4FMU::MODE_NONE; - - switch (new_mode) { - case PORT_FULL_GPIO: - case PORT_MODE_UNSET: - /* nothing more to do here */ - break; - - case PORT_FULL_SERIAL: - /* set all multi-GPIOs to serial mode */ - gpio_bits = GPIO_MULTI_1 | GPIO_MULTI_2 | GPIO_MULTI_3 | GPIO_MULTI_4; - break; - - case PORT_FULL_PWM: - /* select 4-pin PWM mode */ - servo_mode = PX4FMU::MODE_4PWM; - break; - - case PORT_GPIO_AND_SERIAL: - /* set RX/TX multi-GPIOs to serial mode */ - gpio_bits = GPIO_MULTI_3 | GPIO_MULTI_4; - break; - - case PORT_PWM_AND_SERIAL: - /* select 2-pin PWM mode */ - servo_mode = PX4FMU::MODE_2PWM; - /* set RX/TX multi-GPIOs to serial mode */ - gpio_bits = GPIO_MULTI_3 | GPIO_MULTI_4; - break; - - case PORT_PWM_AND_GPIO: - /* select 2-pin PWM mode */ - servo_mode = PX4FMU::MODE_2PWM; - break; - } - - /* adjust GPIO config for serial mode(s) */ - if (gpio_bits != 0) - g_fmu->ioctl(0, GPIO_SET_ALT_1, gpio_bits); - - /* (re)set the PWM output mode */ - g_fmu->set_mode(servo_mode); - - return OK; -} - -int -fmu_start(void) -{ - int ret = OK; - - if (g_fmu == nullptr) { - - g_fmu = new PX4FMU; - - if (g_fmu == nullptr) { - ret = -ENOMEM; - - } else { - ret = g_fmu->init(); - - if (ret != OK) { - delete g_fmu; - g_fmu = nullptr; - } - } - } - - return ret; -} - -void -test(void) -{ - int fd; - - fd = open(PWM_OUTPUT_DEVICE_PATH, 0); - - if (fd < 0) - errx(1, "open fail"); - - if (ioctl(fd, PWM_SERVO_ARM, 0) < 0) err(1, "servo arm failed"); - - if (ioctl(fd, PWM_SERVO_SET(0), 1000) < 0) err(1, "servo 1 set failed"); - - if (ioctl(fd, PWM_SERVO_SET(1), 1200) < 0) err(1, "servo 2 set failed"); - - if (ioctl(fd, PWM_SERVO_SET(2), 1400) < 0) err(1, "servo 3 set failed"); - - if (ioctl(fd, PWM_SERVO_SET(3), 1600) < 0) err(1, "servo 4 set failed"); - - close(fd); - - exit(0); -} - -void -fake(int argc, char *argv[]) -{ - if (argc < 5) - errx(1, "fmu fake <roll> <pitch> <yaw> <thrust> (values -100 .. 100)"); - - actuator_controls_s ac; - - ac.control[0] = strtol(argv[1], 0, 0) / 100.0f; - - ac.control[1] = strtol(argv[2], 0, 0) / 100.0f; - - ac.control[2] = strtol(argv[3], 0, 0) / 100.0f; - - ac.control[3] = strtol(argv[4], 0, 0) / 100.0f; - - orb_advert_t handle = orb_advertise(ORB_ID_VEHICLE_ATTITUDE_CONTROLS, &ac); - - if (handle < 0) - errx(1, "advertise failed"); - - actuator_armed_s aa; - - aa.armed = true; - aa.lockdown = false; - - handle = orb_advertise(ORB_ID(actuator_armed), &aa); - - if (handle < 0) - errx(1, "advertise failed 2"); - - exit(0); -} - -} // namespace - -extern "C" __EXPORT int fmu_main(int argc, char *argv[]); - -int -fmu_main(int argc, char *argv[]) -{ - PortMode new_mode = PORT_MODE_UNSET; - const char *verb = argv[1]; - - if (fmu_start() != OK) - errx(1, "failed to start the FMU driver"); - - /* - * Mode switches. - */ - if (!strcmp(verb, "mode_gpio")) { - new_mode = PORT_FULL_GPIO; - - } else if (!strcmp(verb, "mode_serial")) { - new_mode = PORT_FULL_SERIAL; - - } else if (!strcmp(verb, "mode_pwm")) { - new_mode = PORT_FULL_PWM; - - } else if (!strcmp(verb, "mode_gpio_serial")) { - new_mode = PORT_GPIO_AND_SERIAL; - - } else if (!strcmp(verb, "mode_pwm_serial")) { - new_mode = PORT_PWM_AND_SERIAL; - - } else if (!strcmp(verb, "mode_pwm_gpio")) { - new_mode = PORT_PWM_AND_GPIO; - } - - /* was a new mode set? */ - if (new_mode != PORT_MODE_UNSET) { - - /* yes but it's the same mode */ - if (new_mode == g_port_mode) - return OK; - - /* switch modes */ - int ret = fmu_new_mode(new_mode); - exit(ret == OK ? 0 : 1); - } - - if (!strcmp(verb, "test")) - test(); - - if (!strcmp(verb, "fake")) - fake(argc - 1, argv + 1); - - fprintf(stderr, "FMU: unrecognised command, try:\n"); - fprintf(stderr, " mode_gpio, mode_serial, mode_pwm, mode_gpio_serial, mode_pwm_serial, mode_pwm_gpio\n"); - exit(1); -} diff --git a/apps/examples/cdcacm/.context b/apps/examples/cdcacm/.context deleted file mode 100644 index e69de29bb..000000000 --- a/apps/examples/cdcacm/.context +++ /dev/null diff --git a/apps/px4/tests/Makefile b/apps/px4/tests/Makefile index 34f058be4..e27222b9d 100644 --- a/apps/px4/tests/Makefile +++ b/apps/px4/tests/Makefile @@ -41,4 +41,4 @@ STACKSIZE = 12000 include $(APPDIR)/mk/app.mk -MAXOPTIMIZATION = -Os +MAXOPTIMIZATION = -Os
\ No newline at end of file diff --git a/apps/sensors/sensors.cpp b/apps/sensors/sensors.cpp index 1f3f7707e..123bbb120 100644 --- a/apps/sensors/sensors.cpp +++ b/apps/sensors/sensors.cpp @@ -372,7 +372,9 @@ Sensors *g_sensors; } Sensors::Sensors() : +#ifdef CONFIG_HRT_PPM _ppm_last_valid(0), +#endif _fd_adc(-1), _last_adc(0), diff --git a/apps/system/i2c/Makefile b/apps/system/i2c/Makefile index c98e2c0e2..7f0e6005b 100644 --- a/apps/system/i2c/Makefile +++ b/apps/system/i2c/Makefile @@ -66,7 +66,7 @@ PRIORITY = SCHED_PRIORITY_DEFAULT STACKSIZE = 2048 MAXOPTIMIZATION = -Os -# Build targets +# Build Targets all: .built .PHONY: context .depend depend clean distclean diff --git a/apps/systemcmds/eeprom/24xxxx_mtd.c b/apps/systemcmds/eeprom/24xxxx_mtd.c deleted file mode 100644 index e34be44e3..000000000 --- a/apps/systemcmds/eeprom/24xxxx_mtd.c +++ /dev/null @@ -1,571 +0,0 @@ -/************************************************************************************ - * Driver for 24xxxx-style I2C EEPROMs. - * - * Adapted from: - * - * drivers/mtd/at24xx.c - * Driver for I2C-based at24cxx EEPROM(at24c32,at24c64,at24c128,at24c256) - * - * Copyright (C) 2011 Li Zhuoyi. All rights reserved. - * Author: Li Zhuoyi <lzyy.cn@gmail.com> - * History: 0.1 2011-08-20 initial version - * - * 2011-11-1 Added support for larger MTD block sizes: Hal Glenn <hglenn@2g-eng.com> - * - * Derived from drivers/mtd/m25px.c - * - * Copyright (C) 2009-2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ************************************************************************************/ - -/************************************************************************************ - * Included Files - ************************************************************************************/ - -#include <nuttx/config.h> - -#include <sys/types.h> -#include <stdint.h> -#include <stdbool.h> -#include <stdlib.h> -#include <unistd.h> -#include <string.h> -#include <errno.h> -#include <debug.h> - -#include <nuttx/kmalloc.h> -#include <nuttx/fs/ioctl.h> -#include <nuttx/i2c.h> -#include <nuttx/mtd.h> - -#include "systemlib/perf_counter.h" - -/************************************************************************************ - * Pre-processor Definitions - ************************************************************************************/ - -/* - * Configuration is as for the AT24 driver, but the CONFIG_MTD_AT24XX define should be - * omitted in order to avoid building the AT24XX driver as well. - */ - -/* As a minimum, the size of the AT24 part and its 7-bit I2C address are required. */ - -#ifndef CONFIG_AT24XX_SIZE -# warning "Assuming AT24 size 64" -# define CONFIG_AT24XX_SIZE 64 -#endif -#ifndef CONFIG_AT24XX_ADDR -# warning "Assuming AT24 address of 0x50" -# define CONFIG_AT24XX_ADDR 0x50 -#endif - -/* Get the part configuration based on the size configuration */ - -#if CONFIG_AT24XX_SIZE == 32 -# define AT24XX_NPAGES 128 -# define AT24XX_PAGESIZE 32 -#elif CONFIG_AT24XX_SIZE == 48 -# define AT24XX_NPAGES 192 -# define AT24XX_PAGESIZE 32 -#elif CONFIG_AT24XX_SIZE == 64 -# define AT24XX_NPAGES 256 -# define AT24XX_PAGESIZE 32 -#elif CONFIG_AT24XX_SIZE == 128 -# define AT24XX_NPAGES 256 -# define AT24XX_PAGESIZE 64 -#elif CONFIG_AT24XX_SIZE == 256 -# define AT24XX_NPAGES 512 -# define AT24XX_PAGESIZE 64 -#endif - -/* For applications where a file system is used on the AT24, the tiny page sizes - * will result in very inefficient FLASH usage. In such cases, it is better if - * blocks are comprised of "clusters" of pages so that the file system block - * size is, say, 256 or 512 bytes. In any event, the block size *must* be an - * even multiple of the pages. - */ - -#ifndef CONFIG_AT24XX_MTD_BLOCKSIZE -# warning "Assuming driver block size is the same as the FLASH page size" -# define CONFIG_AT24XX_MTD_BLOCKSIZE AT24XX_PAGESIZE -#endif - -/* The AT24 does not respond on the bus during write cycles, so we depend on a long - * timeout to detect problems. The max program time is typically ~5ms. - */ -#ifndef CONFIG_AT24XX_WRITE_TIMEOUT_MS -# define CONFIG_AT24XX_WRITE_TIMEOUT_MS 20 -#endif - -/************************************************************************************ - * Private Types - ************************************************************************************/ - -/* This type represents the state of the MTD device. The struct mtd_dev_s - * must appear at the beginning of the definition so that you can freely - * cast between pointers to struct mtd_dev_s and struct at24c_dev_s. - */ - -struct at24c_dev_s { - struct mtd_dev_s mtd; /* MTD interface */ - FAR struct i2c_dev_s *dev; /* Saved I2C interface instance */ - uint8_t addr; /* I2C address */ - uint16_t pagesize; /* 32, 63 */ - uint16_t npages; /* 128, 256, 512, 1024 */ - - perf_counter_t perf_reads; - perf_counter_t perf_writes; - perf_counter_t perf_resets; - perf_counter_t perf_read_retries; - perf_counter_t perf_read_errors; - perf_counter_t perf_write_errors; -}; - -/************************************************************************************ - * Private Function Prototypes - ************************************************************************************/ - -/* MTD driver methods */ - -static int at24c_erase(FAR struct mtd_dev_s *dev, off_t startblock, size_t nblocks); -static ssize_t at24c_bread(FAR struct mtd_dev_s *dev, off_t startblock, - size_t nblocks, FAR uint8_t *buf); -static ssize_t at24c_bwrite(FAR struct mtd_dev_s *dev, off_t startblock, - size_t nblocks, FAR const uint8_t *buf); -static int at24c_ioctl(FAR struct mtd_dev_s *dev, int cmd, unsigned long arg); - -void at24c_test(void); - -/************************************************************************************ - * Private Data - ************************************************************************************/ - -/* At present, only a single AT24 part is supported. In this case, a statically - * allocated state structure may be used. - */ - -static struct at24c_dev_s g_at24c; - -/************************************************************************************ - * Private Functions - ************************************************************************************/ - -static int at24c_eraseall(FAR struct at24c_dev_s *priv) -{ - int startblock = 0; - uint8_t buf[AT24XX_PAGESIZE + 2]; - - struct i2c_msg_s msgv[1] = { - { - .addr = priv->addr, - .flags = 0, - .buffer = &buf[0], - .length = sizeof(buf), - } - }; - - memset(&buf[2], 0xff, priv->pagesize); - - for (startblock = 0; startblock < priv->npages; startblock++) { - uint16_t offset = startblock * priv->pagesize; - buf[1] = offset & 0xff; - buf[0] = (offset >> 8) & 0xff; - - while (I2C_TRANSFER(priv->dev, &msgv[0], 1) < 0) { - fvdbg("erase stall\n"); - usleep(10000); - } - } - - return OK; -} - -/************************************************************************************ - * Name: at24c_erase - ************************************************************************************/ - -static int at24c_erase(FAR struct mtd_dev_s *dev, off_t startblock, size_t nblocks) -{ - /* EEprom need not erase */ - - return (int)nblocks; -} - -/************************************************************************************ - * Name: at24c_test - ************************************************************************************/ - -void at24c_test(void) -{ - uint8_t buf[CONFIG_AT24XX_MTD_BLOCKSIZE]; - unsigned count = 0; - unsigned errors = 0; - - for (count = 0; count < 10000; count++) { - ssize_t result = at24c_bread(&g_at24c.mtd, 0, 1, buf); - if (result == ERROR) { - if (errors++ > 2) { - vdbg("too many errors\n"); - return; - } - } else if (result != 1) { - vdbg("unexpected %u\n", result); - } - if ((count % 100) == 0) - vdbg("test %u errors %u\n", count, errors); - } -} - -/************************************************************************************ - * Name: at24c_bread - ************************************************************************************/ - -static ssize_t at24c_bread(FAR struct mtd_dev_s *dev, off_t startblock, - size_t nblocks, FAR uint8_t *buffer) -{ - FAR struct at24c_dev_s *priv = (FAR struct at24c_dev_s *)dev; - size_t blocksleft; - uint8_t addr[2]; - int ret; - - struct i2c_msg_s msgv[2] = { - { - .addr = priv->addr, - .flags = 0, - .buffer = &addr[0], - .length = sizeof(addr), - }, - { - .addr = priv->addr, - .flags = I2C_M_READ, - .buffer = 0, - .length = priv->pagesize, - } - }; - -#if CONFIG_AT24XX_MTD_BLOCKSIZE > AT24XX_PAGESIZE - startblock *= (CONFIG_AT24XX_MTD_BLOCKSIZE / AT24XX_PAGESIZE); - nblocks *= (CONFIG_AT24XX_MTD_BLOCKSIZE / AT24XX_PAGESIZE); -#endif - blocksleft = nblocks; - - fvdbg("startblock: %08lx nblocks: %d\n", (long)startblock, (int)nblocks); - - if (startblock >= priv->npages) { - return 0; - } - - if (startblock + nblocks > priv->npages) { - nblocks = priv->npages - startblock; - } - - while (blocksleft-- > 0) { - uint16_t offset = startblock * priv->pagesize; - unsigned tries = CONFIG_AT24XX_WRITE_TIMEOUT_MS; - - addr[1] = offset & 0xff; - addr[0] = (offset >> 8) & 0xff; - msgv[1].buffer = buffer; - - for (;;) { - - perf_begin(priv->perf_reads); - ret = I2C_TRANSFER(priv->dev, &msgv[0], 2); - perf_end(priv->perf_reads); - - if (ret >= 0) - break; - - fvdbg("read stall"); - usleep(1000); - - /* We should normally only be here on the first read after - * a write. - * - * XXX maybe do special first-read handling with optional - * bus reset as well? - */ - perf_count(priv->perf_read_retries); - - if (--tries == 0) { - perf_count(priv->perf_read_errors); - return ERROR; - } - } - - startblock++; - buffer += priv->pagesize; - } - -#if CONFIG_AT24XX_MTD_BLOCKSIZE > AT24XX_PAGESIZE - return nblocks / (CONFIG_AT24XX_MTD_BLOCKSIZE / AT24XX_PAGESIZE); -#else - return nblocks; -#endif -} - -/************************************************************************************ - * Name: at24c_bwrite - * - * Operates on MTD block's and translates to FLASH pages - * - ************************************************************************************/ - -static ssize_t at24c_bwrite(FAR struct mtd_dev_s *dev, off_t startblock, size_t nblocks, - FAR const uint8_t *buffer) -{ - FAR struct at24c_dev_s *priv = (FAR struct at24c_dev_s *)dev; - size_t blocksleft; - uint8_t buf[AT24XX_PAGESIZE + 2]; - int ret; - - struct i2c_msg_s msgv[1] = { - { - .addr = priv->addr, - .flags = 0, - .buffer = &buf[0], - .length = sizeof(buf), - } - }; - -#if CONFIG_AT24XX_MTD_BLOCKSIZE > AT24XX_PAGESIZE - startblock *= (CONFIG_AT24XX_MTD_BLOCKSIZE / AT24XX_PAGESIZE); - nblocks *= (CONFIG_AT24XX_MTD_BLOCKSIZE / AT24XX_PAGESIZE); -#endif - blocksleft = nblocks; - - if (startblock >= priv->npages) { - return 0; - } - - if (startblock + nblocks > priv->npages) { - nblocks = priv->npages - startblock; - } - - fvdbg("startblock: %08lx nblocks: %d\n", (long)startblock, (int)nblocks); - - while (blocksleft-- > 0) { - uint16_t offset = startblock * priv->pagesize; - unsigned tries = CONFIG_AT24XX_WRITE_TIMEOUT_MS; - - buf[1] = offset & 0xff; - buf[0] = (offset >> 8) & 0xff; - memcpy(&buf[2], buffer, priv->pagesize); - - for (;;) { - - perf_begin(priv->perf_writes); - ret = I2C_TRANSFER(priv->dev, &msgv[0], 1); - perf_end(priv->perf_writes); - - if (ret >= 0) - break; - - fvdbg("write stall"); - usleep(1000); - - /* We expect to see a number of retries per write cycle as we - * poll for write completion. - */ - if (--tries == 0) { - perf_count(priv->perf_write_errors); - return ERROR; - } - } - - startblock++; - buffer += priv->pagesize; - } - -#if CONFIG_AT24XX_MTD_BLOCKSIZE > AT24XX_PAGESIZE - return nblocks / (CONFIG_AT24XX_MTD_BLOCKSIZE / AT24XX_PAGESIZE); -#else - return nblocks; -#endif -} - -/************************************************************************************ - * Name: at24c_ioctl - ************************************************************************************/ - -static int at24c_ioctl(FAR struct mtd_dev_s *dev, int cmd, unsigned long arg) -{ - FAR struct at24c_dev_s *priv = (FAR struct at24c_dev_s *)dev; - int ret = -EINVAL; /* Assume good command with bad parameters */ - - fvdbg("cmd: %d \n", cmd); - - switch (cmd) { - case MTDIOC_GEOMETRY: { - FAR struct mtd_geometry_s *geo = (FAR struct mtd_geometry_s *)((uintptr_t)arg); - - if (geo) { - /* Populate the geometry structure with information need to know - * the capacity and how to access the device. - * - * NOTE: that the device is treated as though it where just an array - * of fixed size blocks. That is most likely not true, but the client - * will expect the device logic to do whatever is necessary to make it - * appear so. - * - * blocksize: - * May be user defined. The block size for the at24XX devices may be - * larger than the page size in order to better support file systems. - * The read and write functions translate BLOCKS to pages for the - * small flash devices - * erasesize: - * It has to be at least as big as the blocksize, bigger serves no - * purpose. - * neraseblocks - * Note that the device size is in kilobits and must be scaled by - * 1024 / 8 - */ - -#if CONFIG_AT24XX_MTD_BLOCKSIZE > AT24XX_PAGESIZE - geo->blocksize = CONFIG_AT24XX_MTD_BLOCKSIZE; - geo->erasesize = CONFIG_AT24XX_MTD_BLOCKSIZE; - geo->neraseblocks = (CONFIG_AT24XX_SIZE * 1024 / 8) / CONFIG_AT24XX_MTD_BLOCKSIZE; -#else - geo->blocksize = priv->pagesize; - geo->erasesize = priv->pagesize; - geo->neraseblocks = priv->npages; -#endif - ret = OK; - - fvdbg("blocksize: %d erasesize: %d neraseblocks: %d\n", - geo->blocksize, geo->erasesize, geo->neraseblocks); - } - } - break; - - case MTDIOC_BULKERASE: - ret = at24c_eraseall(priv); - break; - - case MTDIOC_XIPBASE: - default: - ret = -ENOTTY; /* Bad command */ - break; - } - - return ret; -} - -/************************************************************************************ - * Public Functions - ************************************************************************************/ - -/************************************************************************************ - * Name: at24c_initialize - * - * Description: - * Create an initialize MTD device instance. MTD devices are not registered - * in the file system, but are created as instances that can be bound to - * other functions (such as a block or character driver front end). - * - ************************************************************************************/ - -FAR struct mtd_dev_s *at24c_initialize(FAR struct i2c_dev_s *dev) { - FAR struct at24c_dev_s *priv; - - fvdbg("dev: %p\n", dev); - - /* Allocate a state structure (we allocate the structure instead of using - * a fixed, static allocation so that we can handle multiple FLASH devices. - * The current implementation would handle only one FLASH part per I2C - * device (only because of the SPIDEV_FLASH definition) and so would have - * to be extended to handle multiple FLASH parts on the same I2C bus. - */ - - priv = &g_at24c; - - if (priv) { - /* Initialize the allocated structure */ - - priv->addr = CONFIG_AT24XX_ADDR; - priv->pagesize = AT24XX_PAGESIZE; - priv->npages = AT24XX_NPAGES; - - priv->mtd.erase = at24c_erase; - priv->mtd.bread = at24c_bread; - priv->mtd.bwrite = at24c_bwrite; - priv->mtd.ioctl = at24c_ioctl; - priv->dev = dev; - - priv->perf_reads = perf_alloc(PC_ELAPSED, "EEPROM read"); - priv->perf_writes = perf_alloc(PC_ELAPSED, "EEPROM write"); - priv->perf_resets = perf_alloc(PC_COUNT, "EEPROM reset"); - priv->perf_read_retries = perf_alloc(PC_COUNT, "EEPROM read retries"); - priv->perf_read_errors = perf_alloc(PC_COUNT, "EEPROM read errors"); - priv->perf_write_errors = perf_alloc(PC_COUNT, "EEPROM write errors"); - } - - /* attempt to read to validate device is present */ - unsigned char buf[5]; - uint8_t addrbuf[2] = {0, 0}; - - struct i2c_msg_s msgv[2] = { - { - .addr = priv->addr, - .flags = 0, - .buffer = &addrbuf[0], - .length = sizeof(addrbuf), - }, - { - .addr = priv->addr, - .flags = I2C_M_READ, - .buffer = &buf[0], - .length = sizeof(buf), - } - }; - - perf_begin(priv->perf_reads); - int ret = I2C_TRANSFER(priv->dev, &msgv[0], 2); - perf_end(priv->perf_reads); - - if (ret < 0) { - return NULL; - } - - /* Return the implementation-specific state structure as the MTD device */ - - fvdbg("Return %p\n", priv); - return (FAR struct mtd_dev_s *)priv; -} - -/* - * XXX: debug hackery - */ -int at24c_nuke(void) -{ - return at24c_eraseall(&g_at24c); -} diff --git a/apps/systemcmds/eeprom/Makefile b/apps/systemcmds/eeprom/Makefile deleted file mode 100644 index 79a05550e..000000000 --- a/apps/systemcmds/eeprom/Makefile +++ /dev/null @@ -1,44 +0,0 @@ -############################################################################ -# -# Copyright (C) 2012 PX4 Development Team. All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name PX4 nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -# -# Build the eeprom tool. -# - -APPNAME = eeprom -PRIORITY = SCHED_PRIORITY_DEFAULT -STACKSIZE = 4096 - -include $(APPDIR)/mk/app.mk - -MAXOPTIMIZATION = -Os diff --git a/apps/systemcmds/eeprom/eeprom.c b/apps/systemcmds/eeprom/eeprom.c deleted file mode 100644 index 49da51358..000000000 --- a/apps/systemcmds/eeprom/eeprom.c +++ /dev/null @@ -1,265 +0,0 @@ -/**************************************************************************** - * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. - * Author: Lorenz Meier <lm@inf.ethz.ch> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name PX4 nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/** - * @file eeprom.c - * - * EEPROM service and utility app. - */ - -#include <nuttx/config.h> - -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <stdbool.h> -#include <unistd.h> -#include <fcntl.h> -#include <sys/mount.h> -#include <sys/ioctl.h> -#include <sys/stat.h> - -#include <nuttx/i2c.h> -#include <nuttx/mtd.h> -#include <nuttx/fs/nxffs.h> -#include <nuttx/fs/ioctl.h> - -#include <arch/board/board.h> - -#include "systemlib/systemlib.h" -#include "systemlib/param/param.h" -#include "systemlib/err.h" - -#ifndef PX4_I2C_BUS_ONBOARD -# error PX4_I2C_BUS_ONBOARD not defined, cannot locate onboard EEPROM -#endif - -__EXPORT int eeprom_main(int argc, char *argv[]); - -static void eeprom_attach(void); -static void eeprom_start(void); -static void eeprom_erase(void); -static void eeprom_ioctl(unsigned operation); -static void eeprom_save(const char *name); -static void eeprom_load(const char *name); -static void eeprom_test(void); - -static bool attached = false; -static bool started = false; -static struct mtd_dev_s *eeprom_mtd; - -int eeprom_main(int argc, char *argv[]) -{ - if (argc >= 2) { - if (!strcmp(argv[1], "start")) - eeprom_start(); - - if (!strcmp(argv[1], "save_param")) - eeprom_save(argv[2]); - - if (!strcmp(argv[1], "load_param")) - eeprom_load(argv[2]); - - if (!strcmp(argv[1], "erase")) - eeprom_erase(); - - if (!strcmp(argv[1], "test")) - eeprom_test(); - - if (0) { /* these actually require a file on the filesystem... */ - - if (!strcmp(argv[1], "reformat")) - eeprom_ioctl(FIOC_REFORMAT); - - if (!strcmp(argv[1], "repack")) - eeprom_ioctl(FIOC_OPTIMIZE); - } - } - - errx(1, "expected a command, try 'start'\n\t'save_param /eeprom/parameters'\n\t'load_param /eeprom/parameters'\n\t'erase'\n"); -} - - -static void -eeprom_attach(void) -{ - /* find the right I2C */ - struct i2c_dev_s *i2c = up_i2cinitialize(PX4_I2C_BUS_ONBOARD); - /* this resets the I2C bus, set correct bus speed again */ - I2C_SETFREQUENCY(i2c, 400000); - - if (i2c == NULL) - errx(1, "failed to locate I2C bus"); - - /* start the MTD driver, attempt 5 times */ - for (int i = 0; i < 5; i++) { - eeprom_mtd = at24c_initialize(i2c); - if (eeprom_mtd) { - /* abort on first valid result */ - if (i > 0) { - warnx("warning: EEPROM needed %d attempts to attach", i+1); - } - break; - } - } - - /* if last attempt is still unsuccessful, abort */ - if (eeprom_mtd == NULL) - errx(1, "failed to initialize EEPROM driver"); - - attached = true; -} - -static void -eeprom_start(void) -{ - int ret; - - if (started) - errx(1, "EEPROM already mounted"); - - if (!attached) - eeprom_attach(); - - /* start NXFFS */ - ret = nxffs_initialize(eeprom_mtd); - - if (ret < 0) - errx(1, "failed to initialize NXFFS - erase EEPROM to reformat"); - - /* mount the EEPROM */ - ret = mount(NULL, "/eeprom", "nxffs", 0, NULL); - - if (ret < 0) - errx(1, "failed to mount /eeprom - erase EEPROM to reformat"); - - started = true; - warnx("mounted EEPROM at /eeprom"); - exit(0); -} - -extern int at24c_nuke(void); - -static void -eeprom_erase(void) -{ - if (!attached) - eeprom_attach(); - - if (at24c_nuke()) - errx(1, "erase failed"); - - errx(0, "erase done, reboot now"); -} - -static void -eeprom_ioctl(unsigned operation) -{ - int fd; - - fd = open("/eeprom/.", 0); - - if (fd < 0) - err(1, "open /eeprom"); - - if (ioctl(fd, operation, 0) < 0) - err(1, "ioctl"); - - exit(0); -} - -static void -eeprom_save(const char *name) -{ - if (!started) - errx(1, "must be started first"); - - if (!name) - err(1, "missing argument for device name, try '/eeprom/parameters'"); - - warnx("WARNING: 'eeprom save_param' deprecated - use 'param save' instead"); - - /* delete the file in case it exists */ - unlink(name); - - /* create the file */ - int fd = open(name, O_WRONLY | O_CREAT | O_EXCL); - - if (fd < 0) - err(1, "opening '%s' failed", name); - - int result = param_export(fd, false); - close(fd); - - if (result < 0) { - unlink(name); - errx(1, "error exporting to '%s'", name); - } - - exit(0); -} - -static void -eeprom_load(const char *name) -{ - if (!started) - errx(1, "must be started first"); - - if (!name) - err(1, "missing argument for device name, try '/eeprom/parameters'"); - - warnx("WARNING: 'eeprom load_param' deprecated - use 'param load' instead"); - - int fd = open(name, O_RDONLY); - - if (fd < 0) - err(1, "open '%s'", name); - - int result = param_load(fd); - close(fd); - - if (result < 0) - errx(1, "error importing from '%s'", name); - - exit(0); -} - -extern void at24c_test(void); - -static void -eeprom_test(void) -{ - at24c_test(); - exit(0); -} diff --git a/apps/systemlib/Makefile b/apps/systemlib/Makefile index 8240dbe43..b2e233a92 100644 --- a/apps/systemlib/Makefile +++ b/apps/systemlib/Makefile @@ -44,17 +44,9 @@ CSRCS = err.c \ cpuload.c \ getopt_long.c \ up_cxxinitialize.c \ - airspeed.c - -# ppm_decode.c \ - -# -# XXX this really should be a CONFIG_* test -# -ifeq ($(TARGET),px4fmu) -CSRCS += systemlib.c \ pid/pid.c \ - geo/geo.c -endif + geo/geo.c \ + systemlib.c \ + airspeed.c include $(APPDIR)/mk/app.mk |