diff options
Diffstat (limited to 'makefiles/config_px4fmu-v2_default.mk')
| -rw-r--r-- | makefiles/config_px4fmu-v2_default.mk | 142 |
1 files changed, 142 insertions, 0 deletions
diff --git a/makefiles/config_px4fmu-v2_default.mk b/makefiles/config_px4fmu-v2_default.mk new file mode 100644 index 000000000..ab0da3559 --- /dev/null +++ b/makefiles/config_px4fmu-v2_default.mk @@ -0,0 +1,142 @@ +# +# Makefile for the px4fmu_default configuration +# + +# +# Use the configuration's ROMFS, copy the px4iov2 firmware into +# the ROMFS if it's available +# +ROMFS_ROOT = $(PX4_BASE)/ROMFS/px4fmu_common +ROMFS_OPTIONAL_FILES = $(PX4_BASE)/Images/px4io-v2_default.bin + +# +# Board support modules +# +MODULES += drivers/device +MODULES += drivers/stm32 +MODULES += drivers/stm32/adc +MODULES += drivers/stm32/tone_alarm +MODULES += drivers/led +MODULES += drivers/px4fmu +MODULES += drivers/px4io +MODULES += drivers/boards/px4fmu-v2 +MODULES += drivers/rgbled +MODULES += drivers/lsm303d +MODULES += drivers/l3gd20 +MODULES += drivers/hmc5883 +MODULES += drivers/ms5611 +MODULES += drivers/mb12xx +MODULES += drivers/gps +MODULES += drivers/hil +MODULES += drivers/hott/hott_telemetry +MODULES += drivers/hott/hott_sensors +MODULES += drivers/blinkm +MODULES += drivers/airspeed +MODULES += drivers/ets_airspeed +MODULES += drivers/meas_airspeed +MODULES += modules/sensors + +# Needs to be burned to the ground and re-written; for now, +# just don't build it. +#MODULES += drivers/mkblctrl + +# +# System commands +# +MODULES += systemcmds/ramtron +MODULES += systemcmds/bl_update +MODULES += systemcmds/boardinfo +MODULES += systemcmds/mixer +MODULES += systemcmds/param +MODULES += systemcmds/perf +MODULES += systemcmds/preflight_check +MODULES += systemcmds/pwm +MODULES += systemcmds/reboot +MODULES += systemcmds/top +MODULES += systemcmds/tests +MODULES += systemcmds/config +MODULES += systemcmds/nshterm + +# +# General system control +# +MODULES += modules/commander +MODULES += modules/mavlink +MODULES += modules/mavlink_onboard + +# +# Estimation modules (EKF / other filters) +# +MODULES += modules/attitude_estimator_ekf +MODULES += modules/att_pos_estimator_ekf +MODULES += modules/position_estimator_inav +MODULES += examples/flow_position_estimator + +# +# Vehicle Control +# +#MODULES += modules/fw_pos_control_l1 +#MODULES += modules/fw_att_control +MODULES += modules/multirotor_att_control +MODULES += modules/multirotor_pos_control + +# +# Logging +# +MODULES += modules/sdlog2 + +# +# Unit tests +# +MODULES += modules/unit_test +MODULES += modules/commander/commander_tests + +# +# Library modules +# +MODULES += modules/systemlib +MODULES += modules/systemlib/mixer +MODULES += modules/controllib +MODULES += modules/uORB + +# +# Libraries +# +LIBRARIES += lib/mathlib/CMSIS +MODULES += lib/mathlib +MODULES += lib/mathlib/math/filter +#MODULES += lib/ecl +MODULES += lib/geo + +# +# Demo apps +# +#MODULES += examples/math_demo +# Tutorial code from +# https://pixhawk.ethz.ch/px4/dev/hello_sky +#MODULES += examples/px4_simple_app + +# Tutorial code from +# https://pixhawk.ethz.ch/px4/dev/daemon +#MODULES += examples/px4_daemon_app + +# Tutorial code from +# https://pixhawk.ethz.ch/px4/dev/debug_values +#MODULES += examples/px4_mavlink_debug + +# +# Transitional support - add commands from the NuttX export archive. +# +# In general, these should move to modules over time. +# +# Each entry here is <command>.<priority>.<stacksize>.<entrypoint> but we use a helper macro +# to make the table a bit more readable. +# +define _B + $(strip $1).$(or $(strip $2),SCHED_PRIORITY_DEFAULT).$(or $(strip $3),CONFIG_PTHREAD_STACK_DEFAULT).$(strip $4) +endef + +# command priority stack entrypoint +BUILTIN_COMMANDS := \ + $(call _B, sercon, , 2048, sercon_main ) \ + $(call _B, serdis, , 2048, serdis_main ) |