diff options
Diffstat (limited to 'nuttx/Makefile.win')
-rw-r--r-- | nuttx/Makefile.win | 739 |
1 files changed, 739 insertions, 0 deletions
diff --git a/nuttx/Makefile.win b/nuttx/Makefile.win new file mode 100644 index 000000000..d4157a3c4 --- /dev/null +++ b/nuttx/Makefile.win @@ -0,0 +1,739 @@ +############################################################################ +# Makefile.win +# +# Copyright (C) 2012 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <gnutt@nuttx.org> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +TOPDIR := ${shell echo %CD%} +-include $(TOPDIR)\.config +-include $(TOPDIR)\tools\Config.mk +-include $(TOPDIR)\Make.defs + +# Control build verbosity + +ifeq ($(V),1) +export Q := +else +export Q := @ +endif + +# This define is passed as EXTRADEFINES for kernel-mode builds. It is also passed +# during PASS1 (but not PASS2) context and depend targets. + +KDEFINE = -D__KERNEL__ + +# Process architecture and board-specific directories + +ARCH_DIR = arch\$(CONFIG_ARCH) +ARCH_SRC = $(ARCH_DIR)\src +ARCH_INC = $(ARCH_DIR)\include +BOARD_DIR = configs\$(CONFIG_ARCH_BOARD) + +# Add-on directories. These may or may not be in place in the +# NuttX source tree (they must be specifically installed) +# +# CONFIG_APPS_DIR can be over-ridden from the command line or in the .config file. +# The default value of CONFIG_APPS_DIR is ..\apps. Ultimately, the application +# will be built if APPDIR is defined. APPDIR will be defined if a directory containing +# a Makefile is found at the path provided by CONFIG_APPS_DIR + +ifeq ($(CONFIG_APPS_DIR),) +CONFIG_APPS_DIR = ..\apps +endif +APPDIR := ${shell if [ -r $(CONFIG_APPS_DIR)\Makefile ]; then echo "$(CONFIG_APPS_DIR)"; fi} + +# All add-on directories. +# +# NUTTX_ADDONS is the list of directories built into the NuttX kernel. +# USER_ADDONS is the list of directories that will be built into the user application + +NUTTX_ADDONS := +USER_ADDONS := + +ifeq ($(CONFIG_NUTTX_KERNEL),y) +USER_ADDONS += $(APPDIR) +else +NUTTX_ADDONS += $(APPDIR) +endif + +# Lists of build directories. +# +# FSDIRS depend on file descriptor support; NONFSDIRS do not (except for parts +# of FSDIRS). We will exclude FSDIRS from the build if file descriptor +# support is disabled +# CONTEXTDIRS include directories that have special, one-time pre-build +# requirements. Normally this includes things like auto-generation of +# configuration specific files or creation of configurable symbolic links +# USERDIRS - When NuttX is build is a monolithic kernel, this provides the +# list of directories that must be built +# OTHERDIRS - These are directories that are not built but probably should +# be cleaned to prevent garbarge from collecting in them when changing +# configurations. + +NONFSDIRS = sched $(ARCH_SRC) $(NUTTX_ADDONS) +FSDIRS = fs drivers binfmt +CONTEXTDIRS = $(APPDIR) +USERDIRS = +OTHERDIRS = lib + +ifeq ($(CONFIG_NUTTX_KERNEL),y) + +NONFSDIRS += syscall +CONTEXTDIRS += syscall +USERDIRS += syscall libc mm $(USER_ADDONS) +ifeq ($(CONFIG_HAVE_CXX),y) +USERDIRS += libxx +endif + +else + +NONFSDIRS += libc mm +OTHERDIRS += syscall $(USER_ADDONS) +ifeq ($(CONFIG_HAVE_CXX),y) +NONFSDIRS += libxx +else +OTHERDIRS += libxx +endif + +endif + +ifeq ($(CONFIG_NX),y) +NONFSDIRS += graphics +CONTEXTDIRS += graphics +else +OTHERDIRS += graphics +endif + +# CLEANDIRS are the directories that will clean in. These are +# all directories that we know about. +# KERNDEPDIRS are the directories in which we will build target dependencies. +# If NuttX and applications are built separately (CONFIG_NUTTX_KERNEL), +# then this holds only the directories containing kernel files. +# USERDEPDIRS. If NuttX and applications are built separately (CONFIG_NUTTX_KERNEL), +# then this holds only the directories containing user files. + +CLEANDIRS = $(NONFSDIRS) $(FSDIRS) $(USERDIRS) $(OTHERDIRS) +KERNDEPDIRS = $(NONFSDIRS) +USERDEPDIRS = $(USERDIRS) + +# Add file system directories to KERNDEPDIRS (they are already in CLEANDIRS) + +ifeq ($(CONFIG_NFILE_DESCRIPTORS),0) +ifeq ($(CONFIG_NET),y) +ifneq ($(CONFIG_NSOCKET_DESCRIPTORS),0) +KERNDEPDIRS += fs +endif +KERNDEPDIRS += drivers +endif +else +KERNDEPDIRS += $(FSDIRS) +endif + +# Add networking directories to KERNDEPDIRS and CLEANDIRS + +ifeq ($(CONFIG_NET),y) +KERNDEPDIRS += net +endif +CLEANDIRS += net + +# +# Extra objects used in the final link. +# +# Pass 1 1ncremental (relative) link objects should be put into the +# processor-specific source directory (where other link objects will +# be created). If the pass1 obect is an archive, it could go anywhere. + +ifeq ($(CONFIG_BUILD_2PASS),y) +EXTRA_OBJS += $(CONFIG_PASS1_OBJECT) +endif + +# NUTTXLIBS is the list of NuttX libraries that is passed to the +# processor-specific Makefile to build the final NuttX target. +# Libraries in FSDIRS are excluded if file descriptor support +# is disabled. +# USERLIBS is the list of libraries used to build the final user-space +# application + +NUTTXLIBS = lib\libsched$(LIBEXT) lib\libarch$(LIBEXT) +USERLIBS = + +# Add libraries for syscall support. The C library will be needed by +# both the kernel- and user-space builds. For now, the memory manager (mm) +# is placed in user space (only). + +ifeq ($(CONFIG_NUTTX_KERNEL),y) +NUTTXLIBS += lib\libstubs$(LIBEXT) lib\libkc$(LIBEXT) +USERLIBS += lib\libproxies$(LIBEXT) lib\libuc$(LIBEXT) lib\libmm$(LIBEXT) +else +NUTTXLIBS += lib\libmm$(LIBEXT) lib\libc$(LIBEXT) +endif + +# Add libraries for C++ support. CXX, CXXFLAGS, and COMPILEXX must +# be defined in Make.defs for this to work! + +ifeq ($(CONFIG_HAVE_CXX),y) +ifeq ($(CONFIG_NUTTX_KERNEL),y) +USERLIBS += lib\libcxx$(LIBEXT) +else +NUTTXLIBS += lib\libcxx$(LIBEXT) +endif +endif + +# Add library for application support. + +ifneq ($(APPDIR),) +ifeq ($(CONFIG_NUTTX_KERNEL),y) +USERLIBS += lib\libapps$(LIBEXT) +else +NUTTXLIBS += lib\libapps$(LIBEXT) +endif +endif + +# Add libraries for network support + +ifeq ($(CONFIG_NET),y) +NUTTXLIBS += lib\libnet$(LIBEXT) +endif + +# Add libraries for file system support + +ifeq ($(CONFIG_NFILE_DESCRIPTORS),0) +ifneq ($(CONFIG_NSOCKET_DESCRIPTORS),0) +NUTTXLIBS += lib\libfs$(LIBEXT) +endif +ifeq ($(CONFIG_NET),y) +NUTTXLIBS += lib\libdrivers$(LIBEXT) +endif +else +NUTTXLIBS += lib\libfs$(LIBEXT) lib\libdrivers$(LIBEXT) lib\libbinfmt$(LIBEXT) +endif + +# Add libraries for the NX graphics sub-system + +ifeq ($(CONFIG_NX),y) +NUTTXLIBS += lib\libgraphics$(LIBEXT) +endif + +# LINKLIBS derives from NUTTXLIBS and is simply the same list with the subdirectory removed + +LINKLIBS = $(patsubst lib\%,%,$(NUTTXLIBS)) + +# This is the name of the final target (relative to the top level directorty) + +BIN = nuttx$(EXEEXT) + +all: $(BIN) +.PHONY: context clean_context check_context export subdir_clean clean subdir_distclean distclean apps_clean apps_distclean + +# Target used to copy include\nuttx\math.h. If CONFIG_ARCH_MATH_H is +# defined, then there is an architecture specific math.h header file +# that will be included indirectly from include\math.h. But first, we +# have to copy math.h from include\nuttx\. to include\. Logic within +# include\nuttx\math.h will hand the redirection to the architecture- +# specific math.h header file. +# +# If the CONFIG_LIBM is defined, the Rhombus libm will be built at libc\math. +# Definitions and prototypes for the Rhombus libm are also contained in +# include\nuttx\math.h and so the file must also be copied in that case. +# +# If neither CONFIG_ARCH_MATH_H nor CONFIG_LIBM is defined, then no math.h +# header file will be provided. You would want that behavior if (1) you +# don't use libm, or (2) you want to use the math.h and libm provided +# within your toolchain. + +ifeq ($(CONFIG_ARCH_MATH_H),y) +NEED_MATH_H = y +else +ifeq ($(CONFIG_LIBM),y) +NEED_MATH_H = y +endif +endif + +ifeq ($(NEED_MATH_H),y) +include\math.h: include\nuttx\math.h + $(Q) cp -f include\nuttx\math.h include\math.h +else +include\math.h: +endif + +# The float.h header file defines the properties of your floating point +# implementation. It would always be best to use your toolchain's float.h +# header file but if none is avaiable, a default float.h header file will +# provided if this option is selected. However there is no assurance that +# the settings in this float.h are actually correct for your platform! + +ifeq ($(CONFIG_ARCH_FLOAT_H),y) +include\float.h: include\nuttx\float.h + $(Q) cp -f include\nuttx\float.h include\float.h +else +include\float.h: +endif + +# Target used to copy include\nuttx\stdarg.h. If CONFIG_ARCH_STDARG_H is +# defined, then there is an architecture specific stdarg.h header file +# that will be included indirectly from include\stdarg.h. But first, we +# have to copy stdarg.h from include\nuttx\. to include\. + +ifeq ($(CONFIG_ARCH_STDARG_H),y) +include\stdarg.h: include\nuttx\stdarg.h + $(Q) cp -f include\nuttx\stdarg.h include\stdarg.h +else +include\stdarg.h: +endif + +# Targets used to build include\nuttx\version.h. Creation of version.h is +# part of the overall NuttX configuration sequence. Notice that the +# tools\mkversion tool is built and used to create include\nuttx\version.h + +tools\mkversion: + $(Q) $(MAKE) -C tools -f Makefile.host TOPDIR="$(TOPDIR)" mkversion + +$(TOPDIR)\.version: + $(Q) if [ ! -f .version ]; then \ + echo "No .version file found, creating one"; \ + tools\version.sh -v 0.0 -b 0 .version; \ + chmod 755 .version; \ + fi + +include\nuttx\version.h: $(TOPDIR)\.version tools\mkversion + $(Q) tools\mkversion $(TOPDIR) > include\nuttx\version.h + +# Targets used to build include\nuttx\config.h. Creation of config.h is +# part of the overall NuttX configuration sequence. Notice that the +# tools\mkconfig tool is built and used to create include\nuttx\config.h + +tools\mkconfig: + $(Q) $(MAKE) -C tools -f Makefile.host TOPDIR="$(TOPDIR)" mkconfig + +include\nuttx\config.h: $(TOPDIR)\.config tools\mkconfig + $(Q) tools\mkconfig $(TOPDIR) > include\nuttx\config.h + +# dirlinks, and helpers +# +# Directories links. Most of establishing the NuttX configuration involves +# setting up symbolic links with 'generic' directory names to specific, +# configured directories. +# +# Link the apps/include directory to include\apps + +include\apps: Make.defs +ifneq ($(APPDIR),) + @echo "LN: include\apps $(APPDIR)\include" +ifeq ($(CONFIG_WINDOWS_MKLINK),y) + $(Q) /user:administrator mklink /d include\apps $(APPDIR)\include +else + $(Q) xcopy $(APPDIR)\include include\apps /c /q /s /e /y /i + $(Q) echo FAKELNK > include\apps\.fakelnk +endif +endif + +# Link the arch\<arch-name>\include directory to include\arch + +include\arch: Make.defs + @echo "LN: include\arch -> $(TOPDIR)\$(ARCH_DIR)\include" +ifeq ($(CONFIG_WINDOWS_MKLINK),y) + $(Q) /user:administrator mklink /d include\arch $(TOPDIR)\$(ARCH_DIR)\include +else + $(Q) xcopy $(TOPDIR)\$(ARCH_DIR)\include include\arch /c /q /s /e /y /i + $(Q) echo FAKELNK > include\arch\.fakelnk +endif + +# Link the configs\<board-name>\include directory to include\arch\board + +include\arch\board: include\arch Make.defs include\arch + @echo "LN: include\arch\board -> $(TOPDIR)\$(BOARD_DIR)\include" +ifeq ($(CONFIG_WINDOWS_MKLINK),y) + $(Q) /user:administrator mklink /d include\arch\board $(TOPDIR)\$(BOARD_DIR)\include +else + $(Q) xcopy $(TOPDIR)\$(BOARD_DIR)\include include\arch\board /c /q /s /e /y /i + $(Q) echo FAKELNK > include\arch\board\.fakelnk +endif + +# Link the configs\<board-name>\src dir to arch\<arch-name>\src\board + +$(ARCH_SRC)\board: Make.defs + @echo "LN: $(ARCH_SRC)\board -> $(TOPDIR)\$(BOARD_DIR)\src" +ifeq ($(CONFIG_WINDOWS_MKLINK),y) + $(Q) /user:administrator mklink /d $(ARCH_SRC)\board $(TOPDIR)\$(BOARD_DIR)\src +else + $(Q) xcopy $(TOPDIR)\$(BOARD_DIR)\src $(ARCH_SRC)\board /c /q /s /e /y /i + $(Q) echo FAKELNK > $(ARCH_SRC)\board\.fakelnk +endif + +# Link arch\<arch-name>\include\<chip-name> to arch\<arch-name>\include\chip + +$(ARCH_SRC)\chip: Make.defs +ifneq ($(CONFIG_ARCH_CHIP),) + @echo "LN: $(ARCH_SRC)\chip -> $(TOPDIR)\$(ARCH_SRC)\$(CONFIG_ARCH_CHIP)" +ifeq ($(CONFIG_WINDOWS_MKLINK),y) + $(Q) /user:administrator mklink /d $(ARCH_SRC)\chip $(TOPDIR)\$(ARCH_SRC)\$(CONFIG_ARCH_CHIP) +else + $(Q) xcopy $(TOPDIR)\$(ARCH_SRC)\$(CONFIG_ARCH_CHIP) $(ARCH_SRC)\chip /c /q /s /e /y /i + $(Q) echo FAKELNK > $(ARCH_SRC)\chip\.fakelnk +endif +endif + +# Link arch\<arch-name>\src\<chip-name> to arch\<arch-name>\src\chip + +include\arch\chip: include\arch Make.defs +ifneq ($(CONFIG_ARCH_CHIP),) + @echo "LN: include\arch\chip -> $(TOPDIR)\$(ARCH_INC)\$(CONFIG_ARCH_CHIP)" +ifeq ($(CONFIG_WINDOWS_MKLINK),y) + $(Q) /user:administrator mklink /d include\arch\chip $(TOPDIR)\$(ARCH_INC)\$(CONFIG_ARCH_CHIP) +else + $(Q) xcopy $(TOPDIR)\$(ARCH_INC)\$(CONFIG_ARCH_CHIP) include\arch\chip /c /q /s /e /y /i + $(Q) echo FAKELNK > include\arch\chip\.fakelnk +endif +endif + +dirlinks: include\arch include\arch\board include\arch\chip $(ARCH_SRC)\board $(ARCH_SRC)\chip include\apps + +# context +# +# The context target is invoked on each target build to assure that NuttX is +# properly configured. The basic configuration steps include creation of the +# the config.h and version.h header files in the include\nuttx directory and +# the establishment of symbolic links to configured directories. + +context: check_context include\nuttx\config.h include\nuttx\version.h include\math.h include\float.h include\stdarg.h dirlinks + $(Q) for %%G in ($(CONTEXTDIRS)) do ( $(MAKE) -C %%G TOPDIR="$(TOPDIR)" context ) + +# clean_context +# +# This is part of the distclean target. It removes all of the header files +# and symbolic links created by the context target. + +clean_context: + $(Q) rm -f include\nuttx\config.h + $(Q) rm -f include\nuttx\version.h + $(Q) rm -f include\math.h + $(Q) rm -f include\stdarg.h + $(Q) $(DIRUNLINK) include\arch\board + $(Q) $(DIRUNLINK) include\arch\chip + $(Q) $(DIRUNLINK) include\arch + $(Q) $(DIRUNLINK) $(ARCH_SRC)\board + $(Q) $(DIRUNLINK) $(ARCH_SRC)\chip + $(Q) $(DIRUNLINK) include\apps + +# check_context +# +# This target checks if NuttX has been configured. NuttX is configured using +# the script tools\configure.sh. That script will install certain files in +# the top-level NuttX build directory. This target verifies that those +# configuration files have been installed and that NuttX is ready to be built. + +check_context: + if not exist $(TOPDIR)\.config echo "$(TOPDIR)\.config does not exist" + if not exist $(TOPDIR)\Make.defs echo "$(TOPDIR)\Make.defs does not exist" + +# Archive targets. The target build sequency will first create a series of +# libraries, one per configured source file directory. The final NuttX +# execution will then be built from those libraries. The following targets +# built those libraries. +# +# Possible kernel-mode builds + +libc\libkc$(LIBEXT): context + $(Q) $(MAKE) -C libc TOPDIR="$(TOPDIR)" libkc$(LIBEXT) EXTRADEFINES=$(KDEFINE) + +lib\libkc$(LIBEXT): libc\libkc$(LIBEXT) + $(Q) install libc\libkc$(LIBEXT) lib\libkc$(LIBEXT) + +sched\libsched$(LIBEXT): context + $(Q) $(MAKE) -C sched TOPDIR="$(TOPDIR)" libsched$(LIBEXT) EXTRADEFINES=$(KDEFINE) + +lib\libsched$(LIBEXT): sched\libsched$(LIBEXT) + $(Q) install sched\libsched$(LIBEXT) lib\libsched$(LIBEXT) + +$(ARCH_SRC)\libarch$(LIBEXT): context + $(Q) $(MAKE) -C $(ARCH_SRC) TOPDIR="$(TOPDIR)" libarch$(LIBEXT) EXTRADEFINES=$(KDEFINE) + +lib\libarch$(LIBEXT): $(ARCH_SRC)\libarch$(LIBEXT) + $(Q) install $(ARCH_SRC)\libarch$(LIBEXT) lib\libarch$(LIBEXT) + +net\libnet$(LIBEXT): context + $(Q) $(MAKE) -C net TOPDIR="$(TOPDIR)" libnet$(LIBEXT) EXTRADEFINES=$(KDEFINE) + +lib\libnet$(LIBEXT): net\libnet$(LIBEXT) + $(Q) install net\libnet$(LIBEXT) lib\libnet$(LIBEXT) + +fs\libfs$(LIBEXT): context + $(Q) $(MAKE) -C fs TOPDIR="$(TOPDIR)" libfs$(LIBEXT) EXTRADEFINES=$(KDEFINE) + +lib\libfs$(LIBEXT): fs\libfs$(LIBEXT) + $(Q) install fs\libfs$(LIBEXT) lib\libfs$(LIBEXT) + +drivers\libdrivers$(LIBEXT): context + $(Q) $(MAKE) -C drivers TOPDIR="$(TOPDIR)" libdrivers$(LIBEXT) EXTRADEFINES=$(KDEFINE) + +lib\libdrivers$(LIBEXT): drivers\libdrivers$(LIBEXT) + $(Q) install drivers\libdrivers$(LIBEXT) lib\libdrivers$(LIBEXT) + +binfmt\libbinfmt$(LIBEXT): context + $(Q) $(MAKE) -C binfmt TOPDIR="$(TOPDIR)" libbinfmt$(LIBEXT) EXTRADEFINES=$(KDEFINE) + +lib\libbinfmt$(LIBEXT): binfmt\libbinfmt$(LIBEXT) + $(Q) install binfmt\libbinfmt$(LIBEXT) lib\libbinfmt$(LIBEXT) + +graphics\libgraphics$(LIBEXT): context + $(Q) $(MAKE) -C graphics TOPDIR="$(TOPDIR)" libgraphics$(LIBEXT) EXTRADEFINES=$(KDEFINE) + +lib\libgraphics$(LIBEXT): graphics\libgraphics$(LIBEXT) + $(Q) install graphics\libgraphics$(LIBEXT) lib\libgraphics$(LIBEXT) + +syscall\libstubs$(LIBEXT): context + $(Q) $(MAKE) -C syscall TOPDIR="$(TOPDIR)" libstubs$(LIBEXT) EXTRADEFINES=$(KDEFINE) + +lib\libstubs$(LIBEXT): syscall\libstubs$(LIBEXT) + $(Q) install syscall\libstubs$(LIBEXT) lib\libstubs$(LIBEXT) + +# Possible user-mode builds + +libc\libuc$(LIBEXT): context + $(Q) $(MAKE) -C libc TOPDIR="$(TOPDIR)" libuc$(LIBEXT) + +lib\libuc$(LIBEXT): libc\libuc$(LIBEXT) + $(Q) install libc\libuc$(LIBEXT) lib\libuc$(LIBEXT) + +libxx\libcxx$(LIBEXT): context + $(Q) $(MAKE) -C libxx TOPDIR="$(TOPDIR)" libcxx$(LIBEXT) + +lib\libcxx$(LIBEXT): libxx\libcxx$(LIBEXT) + $(Q) install libxx\libcxx$(LIBEXT) lib\libcxx$(LIBEXT) + +mm\libmm$(LIBEXT): context + $(Q) $(MAKE) -C mm TOPDIR="$(TOPDIR)" libmm$(LIBEXT) EXTRADEFINES=$(KDEFINE) + +lib\libmm$(LIBEXT): mm\libmm$(LIBEXT) + $(Q) install mm\libmm$(LIBEXT) lib\libmm$(LIBEXT) + +$(APPDIR)\libapps$(LIBEXT): context + $(Q) $(MAKE) -C $(APPDIR) TOPDIR="$(TOPDIR)" libapps$(LIBEXT) + +lib\libapps$(LIBEXT): $(APPDIR)\libapps$(LIBEXT) + $(Q) install $(APPDIR)\libapps$(LIBEXT) lib\libapps$(LIBEXT) + +syscall\libproxies$(LIBEXT): context + $(Q) $(MAKE) -C syscall TOPDIR="$(TOPDIR)" libproxies$(LIBEXT) + +lib\libproxies$(LIBEXT): syscall\libproxies$(LIBEXT) + $(Q) install syscall\libproxies$(LIBEXT) lib\libproxies$(LIBEXT) + +# Possible non-kernel builds + +libc\libc$(LIBEXT): context + $(Q) $(MAKE) -C libc TOPDIR="$(TOPDIR)" libc$(LIBEXT) + +lib\libc$(LIBEXT): libc\libc$(LIBEXT) + $(Q) install libc\libc$(LIBEXT) lib\libc$(LIBEXT) + +# pass1 and pass2 +# +# If the 2 pass build option is selected, then this pass1 target is +# configured to built before the pass2 target. This pass1 target may, as an +# example, build an extra link object (CONFIG_PASS1_OBJECT) which may be an +# incremental (relative) link object, but could be a static library (archive); +# some modification to this Makefile would be required if CONFIG_PASS1_OBJECT +# is an archive. Exactly what is performed during pass1 or what it generates +# is unknown to this makefule unless CONFIG_PASS1_OBJECT is defined. + +pass1deps: context pass1dep $(USERLIBS) + +pass1: pass1deps +ifeq ($(CONFIG_BUILD_2PASS),y) + $(Q) if [ -z "$(CONFIG_PASS1_BUILDIR)" ]; then \ + echo "ERROR: CONFIG_PASS1_BUILDIR not defined"; \ + exit 1; \ + fi + $(Q) if [ ! -d "$(CONFIG_PASS1_BUILDIR)" ]; then \ + echo "ERROR: CONFIG_PASS1_BUILDIR does not exist"; \ + exit 1; \ + fi + $(Q) if [ ! -f "$(CONFIG_PASS1_BUILDIR)\Makefile" ]; then \ + echo "ERROR: No Makefile in CONFIG_PASS1_BUILDIR"; \ + exit 1; \ + fi + $(Q) $(MAKE) -C $(CONFIG_PASS1_BUILDIR) TOPDIR="$(TOPDIR)" LINKLIBS="$(LINKLIBS)" USERLIBS="$(USERLIBS)" "$(CONFIG_PASS1_TARGET)" +endif + +pass2deps: context pass2dep $(NUTTXLIBS) + +pass2: pass2deps + $(Q) $(MAKE) -C $(ARCH_SRC) TOPDIR="$(TOPDIR)" EXTRA_OBJS="$(EXTRA_OBJS)" LINKLIBS="$(LINKLIBS)" EXTRADEFINES=$(KDEFINE) $(BIN) + $(Q) if [ -w \tftpboot ] ; then \ + cp -f $(BIN) \tftpboot\$(BIN).${CONFIG_ARCH}; \ + fi +ifeq ($(CONFIG_RRLOAD_BINARY),y) + @echo "MK: $(BIN).rr" + $(Q) $(TOPDIR)\tools\mkimage.sh --Prefix $(CROSSDEV) $(BIN) $(BIN).rr + $(Q) if [ -w \tftpboot ] ; then \ + cp -f $(BIN).rr \tftpboot\$\(BIN).rr.$(CONFIG_ARCH); \ + fi +endif +ifeq ($(CONFIG_INTELHEX_BINARY),y) + @echo "CP: $(BIN).hex" + $(Q) $(OBJCOPY) $(OBJCOPYARGS) -O ihex $(BIN) $(BIN).hex +endif +ifeq ($(CONFIG_MOTOROLA_SREC),y) + @echo "CP: $(BIN).srec" + $(Q) $(OBJCOPY) $(OBJCOPYARGS) -O srec $(BIN) $(BIN).srec +endif +ifeq ($(CONFIG_RAW_BINARY),y) + @echo "CP: $(BIN).bin" + $(Q) $(OBJCOPY) $(OBJCOPYARGS) -O binary $(BIN) $(BIN).bin +endif + +# $(BIN) +# +# Create the final NuttX executable in a two pass build process. In the +# normal case, all pass1 and pass2 dependencies are created then pass1 +# and pass2 targets are built. However, in some cases, you may need to build +# pass1 depenencies and pass1 first, then build pass2 dependencies and pass2. +# in that case, execute 'make pass1 pass2' from the command line. + +$(BIN): pass1deps pass2deps pass1 pass2 + +# download +# +# This is a helper target that will rebuild NuttX and download it to the target +# system in one step. The operation of this target depends completely upon +# implementation of the DOWNLOAD command in the user Make.defs file. It will +# generate an error an error if the DOWNLOAD command is not defined. + +download: $(BIN) + $(call DOWNLOAD, $<) + +# pass1dep: Create pass1 build dependencies +# pass2dep: Create pass2 build dependencies + +pass1dep: context + $(Q) for %%G in ($(USERDEPDIRS)) do ( $(MAKE) -C %%G TOPDIR="$(TOPDIR)" depend ) + +pass2dep: context + $(Q) for %%G in ($(KERNDEPDIRS)) do ( $(MAKE) -C %%G TOPDIR="$(TOPDIR)" EXTRADEFINES=$(KDEFINE) depend ) + +# Configuration targets +# +# These targets depend on the kconfig-frontends packages. To use these, you +# must first download and install the kconfig-frontends package from this +# location: http://ymorin.is-a-geek.org/projects/kconfig-frontends. See +# misc\tools\README.txt for additional information. + +config: + $(Q) APPSDIR=${CONFIG_APPS_DIR} conf Kconfig + +oldconfig: + $(Q) APPSDIR=${CONFIG_APPS_DIR} conf --oldconfig Kconfig + +menuconfig: + $(Q) APPSDIR=${CONFIG_APPS_DIR} mconf Kconfig + +# export +# +# The export target will package the NuttX libraries and header files into +# an exportable package. Caveats: (1) These needs some extension for the KERNEL +# build; it needs to receive USERLIBS and create a libuser.a). (2) The logic +# in tools\mkexport.sh only supports GCC and, for example, explicitly assumes +# that the archiver is 'ar' + +export: pass2deps + $(Q) tools\mkexport.sh -w$(WINTOOL) -t "$(TOPDIR)" -l "$(NUTTXLIBS)" + +# General housekeeping targets: dependencies, cleaning, etc. +# +# depend: Create both PASS1 and PASS2 dependencies +# clean: Removes derived object files, archives, executables, and +# temporary files, but retains the configuration and context +# files and directories. +# distclean: Does 'clean' then also removes all configuration and context +# files. This essentially restores the directory structure +# to its original, unconfigured stated. + +depend: pass1dep pass2dep + +subdir_clean: + $(Q) for %%G in ($(CLEANDIRS)) do ( if exist %%G/Makefile $(MAKE) -C %%G TOPDIR="$(TOPDIR)" clean ) + $(Q) $(MAKE) -C tools -f Makefile.host TOPDIR="$(TOPDIR)" clean + $(Q) $(MAKE) -C mm -f Makefile.test TOPDIR="$(TOPDIR)" clean +ifeq ($(CONFIG_BUILD_2PASS),y) + $(Q) $(MAKE) -C $(CONFIG_PASS1_BUILDIR) TOPDIR="$(TOPDIR)" clean +endif + +clean: subdir_clean + $(Q) rm -f $(BIN) nuttx.* mm_test *.map _SAVED_APPS_config *~ + $(Q) rm -f nuttx-export* + +subdir_distclean: + $(Q) for %%G in ($(CLEANDIRS)) do ( if exist %%G/Makefile $(MAKE) -C %%G TOPDIR="$(TOPDIR)" distclean ) + +distclean: clean subdir_distclean clean_context +ifeq ($(CONFIG_BUILD_2PASS),y) + $(Q) $(MAKE) -C $(CONFIG_PASS1_BUILDIR) TOPDIR="$(TOPDIR)" distclean +endif + $(Q) rm -f Make.defs setenv.sh setenv.bat .config .config.old + +# Application housekeeping targets. The APPDIR variable refers to the user +# application directory. A sample apps\ directory is included with NuttX, +# however, this is not treated as part of NuttX and may be replaced with a +# different application directory. For the most part, the application +# directory is treated like any other build directory in this script. However, +# as a convenience, the following targets are included to support housekeeping +# functions in the user application directory from the NuttX build directory. +# +# apps_clean: Perform the clean operation only in the user application +# directory +# apps_distclean: Perform the distclean operation only in the user application +# directory. Note that the apps\.config file (inf any) is +# preserved so that this is not a "full" distclean but more of a +# configuration "reset." (There willnot be an apps\.config +# file if the configuration was generated via make menuconfig). + +apps_clean: +ifneq ($(APPDIR),) + $(Q) $(MAKE) -C "$(TOPDIR)\$(APPDIR)" TOPDIR="$(TOPDIR)" clean +endif + +apps_distclean: +ifneq ($(APPDIR),) + $(Q) if [ -r "$(TOPDIR)\$(APPDIR)\.config" ]; then \ + cp "$(TOPDIR)\$(APPDIR)\.config" _SAVED_APPS_config || \ + { echo "Copy of $(APPDIR)\.config failed" ; exit 1 ; } \ + else \ + rm -f _SAVED_APPS_config; \ + fi + $(Q) $(MAKE) -C "$(TOPDIR)\$(APPDIR)" TOPDIR="$(TOPDIR)" distclean + $(Q) if [ -r _SAVED_APPS_config ]; then \ + mv _SAVED_APPS_config "$(TOPDIR)\$(APPDIR)\.config" || \ + { echo "Copy of _SAVED_APPS_config failed" ; exit 1 ; } \ + fi +endif + |