diff options
Diffstat (limited to 'nuttx/arch/arm/include/armv7-m/irq_lazyfpu.h')
| -rw-r--r-- | nuttx/arch/arm/include/armv7-m/irq_lazyfpu.h | 186 |
1 files changed, 0 insertions, 186 deletions
diff --git a/nuttx/arch/arm/include/armv7-m/irq_lazyfpu.h b/nuttx/arch/arm/include/armv7-m/irq_lazyfpu.h deleted file mode 100644 index f2380cbb6..000000000 --- a/nuttx/arch/arm/include/armv7-m/irq_lazyfpu.h +++ /dev/null @@ -1,186 +0,0 @@ -/**************************************************************************** - * arch/arm/include/armv7-m/irq.h - * - * Copyright (C) 2009, 2011-2012 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -#ifndef __ARCH_ARM_INCLUDE_ARMV7_M_IRQ_LAZYFPU_H -#define __ARCH_ARM_INCLUDE_ARMV7_M_IRQ_LAZYFPU_H - -/**************************************************************************** - * Included Files - ****************************************************************************/ - -/**************************************************************************** - * Pre-processor Definitions - ****************************************************************************/ - -/* IRQ Stack Frame Format: */ - -/* The following additional registers are stored by the interrupt handling - * logic. - */ - -#define REG_R13 (0) /* R13 = SP at time of interrupt */ -#ifdef CONFIG_ARMV7M_USEBASEPRI -# define REG_BASEPRI (1) /* BASEPRI */ -#else -# define REG_PRIMASK (1) /* PRIMASK */ -#endif -#define REG_R4 (2) /* R4 */ -#define REG_R5 (3) /* R5 */ -#define REG_R6 (4) /* R6 */ -#define REG_R7 (5) /* R7 */ -#define REG_R8 (6) /* R8 */ -#define REG_R9 (7) /* R9 */ -#define REG_R10 (8) /* R10 */ -#define REG_R11 (9) /* R11 */ - -#ifdef CONFIG_NUTTX_KERNEL -# define REG_EXC_RETURN (10) /* EXC_RETURN */ -# define SW_INT_REGS (11) -#else -# define SW_INT_REGS (10) -#endif - -/* If the MCU supports a floating point unit, then it will be necessary - * to save the state of the FPU status register and data registers on - * each context switch. These registers are not saved during interrupt - * level processing, however. So, as a consequence, floating point - * operations may NOT be performed in interrupt handlers. - * - * The FPU provides an extension register file containing 32 single- - * precision registers. These can be viewed as: - * - * - Sixteen 64-bit doubleword registers, D0-D15 - * - Thirty-two 32-bit single-word registers, S0-S31 - * S<2n> maps to the least significant half of D<n> - * S<2n+1> maps to the most significant half of D<n>. - */ - -#ifdef CONFIG_ARCH_FPU -# define REG_D0 (SW_INT_REGS+0) /* D0 */ -# define REG_S0 (SW_INT_REGS+0) /* S0 */ -# define REG_S1 (SW_INT_REGS+1) /* S1 */ -# define REG_D1 (SW_INT_REGS+2) /* D1 */ -# define REG_S2 (SW_INT_REGS+2) /* S2 */ -# define REG_S3 (SW_INT_REGS+3) /* S3 */ -# define REG_D2 (SW_INT_REGS+4) /* D2 */ -# define REG_S4 (SW_INT_REGS+4) /* S4 */ -# define REG_S5 (SW_INT_REGS+5) /* S5 */ -# define REG_D3 (SW_INT_REGS+6) /* D3 */ -# define REG_S6 (SW_INT_REGS+6) /* S6 */ -# define REG_S7 (SW_INT_REGS+7) /* S7 */ -# define REG_D4 (SW_INT_REGS+8) /* D4 */ -# define REG_S8 (SW_INT_REGS+8) /* S8 */ -# define REG_S9 (SW_INT_REGS+9) /* S9 */ -# define REG_D5 (SW_INT_REGS+10) /* D5 */ -# define REG_S10 (SW_INT_REGS+10) /* S10 */ -# define REG_S11 (SW_INT_REGS+11) /* S11 */ -# define REG_D6 (SW_INT_REGS+12) /* D6 */ -# define REG_S12 (SW_INT_REGS+12) /* S12 */ -# define REG_S13 (SW_INT_REGS+13) /* S13 */ -# define REG_D7 (SW_INT_REGS+14) /* D7 */ -# define REG_S14 (SW_INT_REGS+14) /* S14 */ -# define REG_S15 (SW_INT_REGS+15) /* S15 */ -# define REG_D8 (SW_INT_REGS+16) /* D8 */ -# define REG_S16 (SW_INT_REGS+16) /* S16 */ -# define REG_S17 (SW_INT_REGS+17) /* S17 */ -# define REG_D9 (SW_INT_REGS+18) /* D9 */ -# define REG_S18 (SW_INT_REGS+18) /* S18 */ -# define REG_S19 (SW_INT_REGS+19) /* S19 */ -# define REG_D10 (SW_INT_REGS+20) /* D10 */ -# define REG_S20 (SW_INT_REGS+20) /* S20 */ -# define REG_S21 (SW_INT_REGS+21) /* S21 */ -# define REG_D11 (SW_INT_REGS+22) /* D11 */ -# define REG_S22 (SW_INT_REGS+22) /* S22 */ -# define REG_S23 (SW_INT_REGS+23) /* S23 */ -# define REG_D12 (SW_INT_REGS+24) /* D12 */ -# define REG_S24 (SW_INT_REGS+24) /* S24 */ -# define REG_S25 (SW_INT_REGS+25) /* S25 */ -# define REG_D13 (SW_INT_REGS+26) /* D13 */ -# define REG_S26 (SW_INT_REGS+26) /* S26 */ -# define REG_S27 (SW_INT_REGS+27) /* S27 */ -# define REG_D14 (SW_INT_REGS+28) /* D14 */ -# define REG_S28 (SW_INT_REGS+28) /* S28 */ -# define REG_S29 (SW_INT_REGS+29) /* S29 */ -# define REG_D15 (SW_INT_REGS+30) /* D15 */ -# define REG_S30 (SW_INT_REGS+30) /* S30 */ -# define REG_S31 (SW_INT_REGS+31) /* S31 */ -# define REG_FPSCR (SW_INT_REGS+32) /* Floating point status and control */ -# define SW_FPU_REGS (33) -#else -# define SW_FPU_REGS (0) -#endif - -/* The total number of registers saved by software */ - -#define SW_XCPT_REGS (SW_INT_REGS + SW_FPU_REGS) -#define SW_XCPT_SIZE (4 * SW_XCPT_REGS) - -/* On entry into an IRQ, the hardware automatically saves the following - * registers on the stack in this (address) order: - */ - -#define REG_R0 (SW_XCPT_REGS+0) /* R0 */ -#define REG_R1 (SW_XCPT_REGS+1) /* R1 */ -#define REG_R2 (SW_XCPT_REGS+2) /* R2 */ -#define REG_R3 (SW_XCPT_REGS+3) /* R3 */ -#define REG_R12 (SW_XCPT_REGS+4) /* R12 */ -#define REG_R14 (SW_XCPT_REGS+5) /* R14 = LR */ -#define REG_R15 (SW_XCPT_REGS+6) /* R15 = PC */ -#define REG_XPSR (SW_XCPT_REGS+7) /* xPSR */ - -#define HW_XCPT_REGS (8) -#define HW_XCPT_SIZE (4 * HW_XCPT_REGS) - -#define XCPTCONTEXT_REGS (HW_XCPT_REGS + SW_XCPT_REGS) -#define XCPTCONTEXT_SIZE (HW_XCPT_SIZE + SW_XCPT_SIZE) - -/**************************************************************************** - * Public Types - ****************************************************************************/ - -/**************************************************************************** - * Inline functions - ****************************************************************************/ - -/**************************************************************************** - * Public Variables - ****************************************************************************/ - -/**************************************************************************** - * Public Function Prototypes - ****************************************************************************/ - -#endif /* __ARCH_ARM_INCLUDE_ARMV7_M_IRQ_LAZYFPU_H */ - |