diff options
Diffstat (limited to 'nuttx/arch/arm/src/stm32/stm32_irq.c')
| -rw-r--r-- | nuttx/arch/arm/src/stm32/stm32_irq.c | 514 |
1 files changed, 0 insertions, 514 deletions
diff --git a/nuttx/arch/arm/src/stm32/stm32_irq.c b/nuttx/arch/arm/src/stm32/stm32_irq.c deleted file mode 100644 index a952c2486..000000000 --- a/nuttx/arch/arm/src/stm32/stm32_irq.c +++ /dev/null @@ -1,514 +0,0 @@ -/**************************************************************************** - * arch/arm/src/stm32/stm32_irq.c - * arch/arm/src/chip/stm32_irq.c - * - * Copyright (C) 2009-2013 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/**************************************************************************** - * Included Files - ****************************************************************************/ - -#include <nuttx/config.h> - -#include <stdint.h> -#include <debug.h> - -#include <nuttx/irq.h> -#include <nuttx/arch.h> -#include <arch/irq.h> - -#include "nvic.h" -#include "up_arch.h" -#include "os_internal.h" -#include "up_internal.h" -#include "stm32_internal.h" - -/**************************************************************************** - * Definitions - ****************************************************************************/ - -/* Enable NVIC debug features that are probably only desireable during - * bringup - */ - -#undef STM32_IRQ_DEBUG - -/* Get a 32-bit version of the default priority */ - -#define DEFPRIORITY32 \ - (NVIC_SYSH_PRIORITY_DEFAULT << 24 |\ - NVIC_SYSH_PRIORITY_DEFAULT << 16 |\ - NVIC_SYSH_PRIORITY_DEFAULT << 8 |\ - NVIC_SYSH_PRIORITY_DEFAULT) - -/**************************************************************************** - * Public Data - ****************************************************************************/ - -volatile uint32_t *current_regs; - -/**************************************************************************** - * Private Data - ****************************************************************************/ - -/**************************************************************************** - * Private Functions - ****************************************************************************/ - -/**************************************************************************** - * Name: stm32_dumpnvic - * - * Description: - * Dump some interesting NVIC registers - * - ****************************************************************************/ - -#if defined(STM32_IRQ_DEBUG) && defined (CONFIG_DEBUG) -static void stm32_dumpnvic(const char *msg, int irq) -{ - irqstate_t flags; - - flags = irqsave(); - slldbg("NVIC (%s, irq=%d):\n", msg, irq); - slldbg(" INTCTRL: %08x VECTAB: %08x\n", - getreg32(NVIC_INTCTRL), getreg32(NVIC_VECTAB)); -#if 0 - slldbg(" SYSH ENABLE MEMFAULT: %08x BUSFAULT: %08x USGFAULT: %08x SYSTICK: %08x\n", - getreg32(NVIC_SYSHCON_MEMFAULTENA), getreg32(NVIC_SYSHCON_BUSFAULTENA), - getreg32(NVIC_SYSHCON_USGFAULTENA), getreg32(NVIC_SYSTICK_CTRL_ENABLE)); -#endif - slldbg(" IRQ ENABLE: %08x %08x %08x\n", - getreg32(NVIC_IRQ0_31_ENABLE), getreg32(NVIC_IRQ32_63_ENABLE), - getreg32(NVIC_IRQ64_95_ENABLE)); - slldbg(" SYSH_PRIO: %08x %08x %08x\n", - getreg32(NVIC_SYSH4_7_PRIORITY), getreg32(NVIC_SYSH8_11_PRIORITY), - getreg32(NVIC_SYSH12_15_PRIORITY)); - slldbg(" IRQ PRIO: %08x %08x %08x %08x\n", - getreg32(NVIC_IRQ0_3_PRIORITY), getreg32(NVIC_IRQ4_7_PRIORITY), - getreg32(NVIC_IRQ8_11_PRIORITY), getreg32(NVIC_IRQ12_15_PRIORITY)); - slldbg(" %08x %08x %08x %08x\n", - getreg32(NVIC_IRQ16_19_PRIORITY), getreg32(NVIC_IRQ20_23_PRIORITY), - getreg32(NVIC_IRQ24_27_PRIORITY), getreg32(NVIC_IRQ28_31_PRIORITY)); - slldbg(" %08x %08x %08x %08x\n", - getreg32(NVIC_IRQ32_35_PRIORITY), getreg32(NVIC_IRQ36_39_PRIORITY), - getreg32(NVIC_IRQ40_43_PRIORITY), getreg32(NVIC_IRQ44_47_PRIORITY)); - slldbg(" %08x %08x %08x %08x\n", - getreg32(NVIC_IRQ48_51_PRIORITY), getreg32(NVIC_IRQ52_55_PRIORITY), - getreg32(NVIC_IRQ56_59_PRIORITY), getreg32(NVIC_IRQ60_63_PRIORITY)); - slldbg(" %08x\n", - getreg32(NVIC_IRQ64_67_PRIORITY)); - irqrestore(flags); -} -#else -# define stm32_dumpnvic(msg, irq) -#endif - -/**************************************************************************** - * Name: stm32_nmi, stm32_busfault, stm32_usagefault, stm32_pendsv, - * stm32_dbgmonitor, stm32_pendsv, stm32_reserved - * - * Description: - * Handlers for various execptions. None are handled and all are fatal - * error conditions. The only advantage these provided over the default - * unexpected interrupt handler is that they provide a diagnostic output. - * - ****************************************************************************/ - -#ifdef CONFIG_DEBUG -static int stm32_nmi(int irq, FAR void *context) -{ - (void)irqsave(); - dbg("PANIC!!! NMI received\n"); - PANIC(OSERR_UNEXPECTEDISR); - return 0; -} - -static int stm32_busfault(int irq, FAR void *context) -{ - (void)irqsave(); - dbg("PANIC!!! Bus fault recived\n"); - PANIC(OSERR_UNEXPECTEDISR); - return 0; -} - -static int stm32_usagefault(int irq, FAR void *context) -{ - (void)irqsave(); - dbg("PANIC!!! Usage fault received\n"); - PANIC(OSERR_UNEXPECTEDISR); - return 0; -} - -static int stm32_pendsv(int irq, FAR void *context) -{ - (void)irqsave(); - dbg("PANIC!!! PendSV received\n"); - PANIC(OSERR_UNEXPECTEDISR); - return 0; -} - -static int stm32_dbgmonitor(int irq, FAR void *context) -{ - (void)irqsave(); - dbg("PANIC!!! Debug Monitor receieved\n"); - PANIC(OSERR_UNEXPECTEDISR); - return 0; -} - -static int stm32_reserved(int irq, FAR void *context) -{ - (void)irqsave(); - dbg("PANIC!!! Reserved interrupt\n"); - PANIC(OSERR_UNEXPECTEDISR); - return 0; -} -#endif - -/**************************************************************************** - * Name: stm32_prioritize_syscall - * - * Description: - * Set the priority of an exception. This function may be needed - * internally even if support for prioritized interrupts is not enabled. - * - ****************************************************************************/ - -#ifdef CONFIG_ARMV7M_USEBASEPRI -static inline void stm32_prioritize_syscall(int priority) -{ - uint32_t regval; - - /* SVCALL is system handler 11 */ - - regval = getreg32(NVIC_SYSH8_11_PRIORITY); - regval &= ~NVIC_SYSH_PRIORITY_PR11_MASK; - regval |= (priority << NVIC_SYSH_PRIORITY_PR11_SHIFT); - putreg32(regval, NVIC_SYSH8_11_PRIORITY); -} -#endif - -/**************************************************************************** - * Name: stm32_irqinfo - * - * Description: - * Given an IRQ number, provide the register and bit setting to enable or - * disable the irq. - * - ****************************************************************************/ - -static int stm32_irqinfo(int irq, uint32_t *regaddr, uint32_t *bit) -{ - DEBUGASSERT(irq >= STM32_IRQ_NMI && irq < NR_IRQS); - - /* Check for external interrupt */ - - if (irq >= STM32_IRQ_INTERRUPTS) - { - if (irq < STM32_IRQ_INTERRUPTS + 32) - { - *regaddr = NVIC_IRQ0_31_ENABLE; - *bit = 1 << (irq - STM32_IRQ_INTERRUPTS); - } - else if (irq < STM32_IRQ_INTERRUPTS + 64) - { - *regaddr = NVIC_IRQ32_63_ENABLE; - *bit = 1 << (irq - STM32_IRQ_INTERRUPTS - 32); - } - else if (irq < NR_IRQS) - { - *regaddr = NVIC_IRQ64_95_ENABLE; - *bit = 1 << (irq - STM32_IRQ_INTERRUPTS - 64); - } - else - { - return ERROR; /* Invalid interrupt */ - } - } - - /* Handle processor exceptions. Only a few can be disabled */ - - else - { - *regaddr = NVIC_SYSHCON; - if (irq == STM32_IRQ_MEMFAULT) - { - *bit = NVIC_SYSHCON_MEMFAULTENA; - } - else if (irq == STM32_IRQ_BUSFAULT) - { - *bit = NVIC_SYSHCON_BUSFAULTENA; - } - else if (irq == STM32_IRQ_USAGEFAULT) - { - *bit = NVIC_SYSHCON_USGFAULTENA; - } - else if (irq == STM32_IRQ_SYSTICK) - { - *regaddr = NVIC_SYSTICK_CTRL; - *bit = NVIC_SYSTICK_CTRL_ENABLE; - } - else - { - return ERROR; /* Invalid or unsupported exception */ - } - } - - return OK; -} - -/**************************************************************************** - * Public Functions - ****************************************************************************/ - -/**************************************************************************** - * Name: up_irqinitialize - ****************************************************************************/ - -void up_irqinitialize(void) -{ - uint32_t regaddr; - int num_priority_registers; - - /* Disable all interrupts */ - - putreg32(0, NVIC_IRQ0_31_ENABLE); - putreg32(0, NVIC_IRQ32_63_ENABLE); - - /* The standard location for the vector table is at the beginning of FLASH - * at address 0x0800:0000. If we are using the STMicro DFU bootloader, then - * the vector table will be offset to a different location in FLASH and we - * will need to set the NVIC vector location to this alternative location. - */ - -#ifdef CONFIG_STM32_DFU - putreg32((uint32_t)stm32_vectors, NVIC_VECTAB); -#endif - - /* Set all interrupts (and exceptions) to the default priority */ - - putreg32(DEFPRIORITY32, NVIC_SYSH4_7_PRIORITY); - putreg32(DEFPRIORITY32, NVIC_SYSH8_11_PRIORITY); - putreg32(DEFPRIORITY32, NVIC_SYSH12_15_PRIORITY); - - /* The NVIC ICTR register (bits 0-4) holds the number of of interrupt - * lines that the NVIC supports: - * - * 0 -> 32 interrupt lines, 8 priority registers - * 1 -> 64 " " " ", 16 priority registers - * 2 -> 96 " " " ", 32 priority registers - * ... - */ - - num_priority_registers = (getreg32(NVIC_ICTR) + 1) * 8; - - /* Now set all of the interrupt lines to the default priority */ - - regaddr = NVIC_IRQ0_3_PRIORITY; - while (num_priority_registers--) - { - putreg32(DEFPRIORITY32, regaddr); - regaddr += 4; - } - - /* currents_regs is non-NULL only while processing an interrupt */ - - current_regs = NULL; - - /* Attach the SVCall and Hard Fault exception handlers. The SVCall - * exception is used for performing context switches; The Hard Fault - * must also be caught because a SVCall may show up as a Hard Fault - * under certain conditions. - */ - - irq_attach(STM32_IRQ_SVCALL, up_svcall); - irq_attach(STM32_IRQ_HARDFAULT, up_hardfault); - - /* Set the priority of the SVCall interrupt */ - -#ifdef CONFIG_ARCH_IRQPRIO -/* up_prioritize_irq(STM32_IRQ_PENDSV, NVIC_SYSH_PRIORITY_MIN); */ -#endif -#ifdef CONFIG_ARMV7M_USEBASEPRI - stm32_prioritize_syscall(NVIC_SYSH_SVCALL_PRIORITY); -#endif - - /* If the MPU is enabled, then attach and enable the Memory Management - * Fault handler. - */ - -#ifdef CONFIG_ARMV7M_MPU - irq_attach(STM32_IRQ_MEMFAULT, up_memfault); - up_enable_irq(STM32_IRQ_MEMFAULT); -#endif - - /* Attach all other processor exceptions (except reset and sys tick) */ - -#ifdef CONFIG_DEBUG - irq_attach(STM32_IRQ_NMI, stm32_nmi); -#ifndef CONFIG_ARMV7M_MPU - irq_attach(STM32_IRQ_MEMFAULT, up_memfault); -#endif - irq_attach(STM32_IRQ_BUSFAULT, stm32_busfault); - irq_attach(STM32_IRQ_USAGEFAULT, stm32_usagefault); - irq_attach(STM32_IRQ_PENDSV, stm32_pendsv); - irq_attach(STM32_IRQ_DBGMONITOR, stm32_dbgmonitor); - irq_attach(STM32_IRQ_RESERVED, stm32_reserved); -#endif - - stm32_dumpnvic("initial", NR_IRQS); - -#ifndef CONFIG_SUPPRESS_INTERRUPTS - - /* And finally, enable interrupts */ - - irqenable(); -#endif -} - -/**************************************************************************** - * Name: up_disable_irq - * - * Description: - * Disable the IRQ specified by 'irq' - * - ****************************************************************************/ - -void up_disable_irq(int irq) -{ - uint32_t regaddr; - uint32_t regval; - uint32_t bit; - - if (stm32_irqinfo(irq, ®addr, &bit) == 0) - { - /* Clear the appropriate bit in the register to enable the interrupt */ - - regval = getreg32(regaddr); - regval &= ~bit; - putreg32(regval, regaddr); - } - stm32_dumpnvic("disable", irq); -} - -/**************************************************************************** - * Name: up_enable_irq - * - * Description: - * Enable the IRQ specified by 'irq' - * - ****************************************************************************/ - -void up_enable_irq(int irq) -{ - uint32_t regaddr; - uint32_t regval; - uint32_t bit; - - if (stm32_irqinfo(irq, ®addr, &bit) == 0) - { - /* Set the appropriate bit in the register to enable the interrupt */ - - regval = getreg32(regaddr); - regval |= bit; - putreg32(regval, regaddr); - } - stm32_dumpnvic("enable", irq); -} - -/**************************************************************************** - * Name: up_maskack_irq - * - * Description: - * Mask the IRQ and acknowledge it - * - ****************************************************************************/ - -void up_maskack_irq(int irq) -{ - up_disable_irq(irq); -} - -/**************************************************************************** - * Name: up_prioritize_irq - * - * Description: - * Set the priority of an IRQ. - * - * Since this API is not supported on all architectures, it should be - * avoided in common implementations where possible. - * - ****************************************************************************/ - -#ifdef CONFIG_ARCH_IRQPRIO -int up_prioritize_irq(int irq, int priority) -{ - uint32_t regaddr; - uint32_t regval; - int shift; - -#ifdef CONFIG_ARMV7M_USEBASEPRI - DEBUGASSERT(irq >= STM32_IRQ_MEMFAULT && irq < NR_IRQS && - priority >= NVIC_SYSH_DISABLE_PRIORITY && - priority <= NVIC_SYSH_PRIORITY_MIN); -#else - DEBUGASSERT(irq >= STM32_IRQ_MEMFAULT && irq < NR_IRQS && - (unsigned)priority <= NVIC_SYSH_PRIORITY_MIN); -#endif - - if (irq < STM32_IRQ_INTERRUPTS) - { - /* NVIC_SYSH_PRIORITY() maps {0..15} to one of three priority - * registers (0-3 are invalid) - */ - - regaddr = NVIC_SYSH_PRIORITY(irq); - irq -= 4; - } - else - { - /* NVIC_IRQ_PRIORITY() maps {0..} to one of many priority registers */ - - irq -= STM32_IRQ_INTERRUPTS; - regaddr = NVIC_IRQ_PRIORITY(irq); - } - - regval = getreg32(regaddr); - shift = ((irq & 3) << 3); - regval &= ~(0xff << shift); - regval |= (priority << shift); - putreg32(regval, regaddr); - - stm32_dumpnvic("prioritize", irq); - return OK; -} -#endif |