1 files changed, 0 insertions, 105 deletions
diff --git a/nuttx/arch/arm/src/stm32/stm32_lse.c b/nuttx/arch/arm/src/stm32/stm32_lse.c
deleted file mode 100644
index 931199efd..000000000
--- a/nuttx/arch/arm/src/stm32/stm32_lse.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/****************************************************************************
- * arch/arm/src/stm32/stm32_lse.c
- *
- *   Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.orgr>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/****************************************************************************
- * Included Files
- ****************************************************************************/
-
-#include <nuttx/config.h>
-
-#include "up_arch.h"
-
-#include "stm32_rcc.h"
-#include "stm32_waste.h"
-
-/****************************************************************************
- * Definitions
- ****************************************************************************/
-
-/****************************************************************************
- * Private Data
- ****************************************************************************/
-
-/****************************************************************************
- * Private Functions
- ****************************************************************************/
-
-/****************************************************************************
- * Public Functions
- ****************************************************************************/
-
-/****************************************************************************
- * Name: stm32_rcc_enablelse
- *
- * Description:
- *   Enable the External Low-Speed (LSE) Oscillator and, if the RTC is
- *   configured, setup the LSE as the RTC clock source, and enable the RTC.
- *
- * Todo:
- *   Check for LSE good timeout and return with -1,
- *
- ****************************************************************************/
-
-void stm32_rcc_enablelse(void)
-{
-  /* Enable the External Low-Speed (LSE) Oscillator by setting the LSEON bit
-   * the RCC BDCR register.
-   */
-
-  modifyreg16(STM32_RCC_BDCR, 0, RCC_BDCR_LSEON);
-
-  /* Wait for the LSE clock to be ready */
-
-  while ((getreg16(STM32_RCC_BDCR) & RCC_BDCR_LSERDY) == 0)
-    {
-      up_waste();
-    }
-    
-  /* The primariy purpose of the LSE clock is to drive the RTC.  The RTC could
-   * also be driven by the LSI (but that would be very inaccurate) or by the
-   * HSE (but that would prohibit low-power operation)
-   *
-   * Select LSE as RTC Clock Source by setting the RTCSEL field of the RCC BDCR
-   * register.
-   */
-
-#ifdef CONFIG_RTC
-  modifyreg16(STM32_RCC_BDCR, RCC_BDCR_RTCSEL_MASK, RCC_BDCR_RTCSEL_LSE);
-
-  /* Enable the RTC Clock by setting the RTCEN bit in the RCC BDCR register */
-
-  modifyreg16(STM32_RCC_BDCR, 0, RCC_BDCR_RTCEN);    
-#endif
-}