diff options
Diffstat (limited to 'nuttx/arch/arm/src/stm32/stm32_pwm.h')
-rw-r--r-- | nuttx/arch/arm/src/stm32/stm32_pwm.h | 370 |
1 files changed, 370 insertions, 0 deletions
diff --git a/nuttx/arch/arm/src/stm32/stm32_pwm.h b/nuttx/arch/arm/src/stm32/stm32_pwm.h new file mode 100644 index 000000000..c51c56950 --- /dev/null +++ b/nuttx/arch/arm/src/stm32/stm32_pwm.h @@ -0,0 +1,370 @@ +/************************************************************************************ + * arch/arm/src/stm32/stm32_pwm.h + * + * Copyright (C) 2011 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +#ifndef __ARCH_ARM_SRC_STM32_STM32_PWM_H +#define __ARCH_ARM_SRC_STM32_STM32_PWM_H + +/* The STM32 does not have dedicated PWM hardware. Rather, pulsed output control + * is a capabilitiy of the STM32 timers. The logic in this file implements the + * lower half of the standard, NuttX PWM interface using the STM32 timers. That + * interface is described in include/nuttx/pwm.h. + */ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include <nuttx/config.h> + +#include "chip.h" + +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ +/* Configuration ********************************************************************/ +/* Timer devices may be used for different purposes. One special purpose is + * to generate modulated outputs for such things as motor control. If CONFIG_STM32_TIMn + * is defined then the CONFIG_STM32_TIMn_PWM must also be defined to indicate that + * timer "n" is intended to be used for pulsed output signal generation. + */ + +#ifndef CONFIG_STM32_TIM1 +# undef CONFIG_STM32_TIM1_PWM +#endif +#ifndef CONFIG_STM32_TIM2 +# undef CONFIG_STM32_TIM2_PWM +#endif +#ifndef CONFIG_STM32_TIM3 +# undef CONFIG_STM32_TIM3_PWM +#endif +#ifndef CONFIG_STM32_TIM4 +# undef CONFIG_STM32_TIM4_PWM +#endif +#ifndef CONFIG_STM32_TIM5 +# undef CONFIG_STM32_TIM5_PWM +#endif +#ifndef CONFIG_STM32_TIM8 +# undef CONFIG_STM32_TIM8_PWM +#endif +#ifndef CONFIG_STM32_TIM9 +# undef CONFIG_STM32_TIM9_PWM +#endif +#ifndef CONFIG_STM32_TIM10 +# undef CONFIG_STM32_TIM10_PWM +#endif +#ifndef CONFIG_STM32_TIM11 +# undef CONFIG_STM32_TIM11_PWM +#endif +#ifndef CONFIG_STM32_TIM12 +# undef CONFIG_STM32_TIM12_PWM +#endif +#ifndef CONFIG_STM32_TIM13 +# undef CONFIG_STM32_TIM13_PWM +#endif +#ifndef CONFIG_STM32_TIM14 +# undef CONFIG_STM32_TIM14_PWM +#endif + +/* The basic timers (timer 6 and 7) are not capable of generating output pulses */ + +#undef CONFIG_STM32_TIM6_PWM +#undef CONFIG_STM32_TIM7_PWM + +/* Check if PWM support for any channel is enabled. */ + +#if defined(CONFIG_STM32_TIM1_PWM) || defined(CONFIG_STM32_TIM2_PWM) || \ + defined(CONFIG_STM32_TIM3_PWM) || defined(CONFIG_STM32_TIM4_PWM) || \ + defined(CONFIG_STM32_TIM5_PWM) || defined(CONFIG_STM32_TIM8_PWM) || \ + defined(CONFIG_STM32_TIM9_PWM) || defined(CONFIG_STM32_TIM10_PWM) || \ + defined(CONFIG_STM32_TIM11_PWM) || defined(CONFIG_STM32_TIM12_PWM) || \ + defined(CONFIG_STM32_TIM13_PWM) || defined(CONFIG_STM32_TIM14_PWM) + +#include <arch/board/board.h> +#include "chip/stm32_tim.h" + +/* For each timer that is enabled for PWM usage, we need the following additional + * configuration settings: + * + * CONFIG_STM32_TIMx_CHANNEL - Specifies the timer output channel {1,..,4} + * PWM_TIMx_CHn - One of the values defined in chip/stm32*_pinmap.h. In the case + * where there are multiple pin selections, the correct setting must be provided + * in the arch/board/board.h file. + * + * NOTE: The STM32 timers are each capable of generating different signals on + * each of the four channels with different duty cycles. That capability is + * not supported by this driver: Only one output channel per timer. + */ + +#ifdef CONFIG_STM32_TIM1_PWM +# if !defined(CONFIG_STM32_TIM1_CHANNEL) +# error "CONFIG_STM32_TIM1_CHANNEL must be provided" +# elif CONFIG_STM32_TIM1_CHANNEL == 1 +# define PWM_TIM1_PINCFG GPIO_TIM1_CH1OUT +# elif CONFIG_STM32_TIM1_CHANNEL == 2 +# define PWM_TIM1_PINCFG GPIO_TIM1_CH2OUT +# elif CONFIG_STM32_TIM1_CHANNEL == 3 +# define PWM_TIM1_PINCFG GPIO_TIM1_CH3OUT +# elif CONFIG_STM32_TIM1_CHANNEL == 4 +# define PWM_TIM1_PINCFG GPIO_TIM1_CH4OUT +# else +# error "Unsupported value of CONFIG_STM32_TIM1_CHANNEL" +# endif +#endif + +#ifdef CONFIG_STM32_TIM2_PWM +# if !defined(CONFIG_STM32_TIM2_CHANNEL) +# error "CONFIG_STM32_TIM2_CHANNEL must be provided" +# elif CONFIG_STM32_TIM2_CHANNEL == 1 +# define PWM_TIM2_PINCFG GPIO_TIM2_CH1OUT +# elif CONFIG_STM32_TIM2_CHANNEL == 2 +# define PWM_TIM2_PINCFG GPIO_TIM2_CH2OUT +# elif CONFIG_STM32_TIM2_CHANNEL == 3 +# define PWM_TIM2_PINCFG GPIO_TIM2_CH3OUT +# elif CONFIG_STM32_TIM2_CHANNEL == 4 +# define PWM_TIM2_PINCFG GPIO_TIM2_CH4OUT +# else +# error "Unsupported value of CONFIG_STM32_TIM2_CHANNEL" +# endif +#endif + +#ifdef CONFIG_STM32_TIM3_PWM +# if !defined(CONFIG_STM32_TIM3_CHANNEL) +# error "CONFIG_STM32_TIM3_CHANNEL must be provided" +# elif CONFIG_STM32_TIM3_CHANNEL == 1 +# define PWM_TIM3_PINCFG GPIO_TIM3_CH1OUT +# elif CONFIG_STM32_TIM3_CHANNEL == 2 +# define PWM_TIM3_PINCFG GPIO_TIM3_CH2OUT +# elif CONFIG_STM32_TIM3_CHANNEL == 3 +# define PWM_TIM3_PINCFG GPIO_TIM3_CH3OUT +# elif CONFIG_STM32_TIM3_CHANNEL == 4 +# define PWM_TIM3_PINCFG GPIO_TIM3_CH4OUT +# else +# error "Unsupported value of CONFIG_STM32_TIM3_CHANNEL" +# endif +#endif + +#ifdef CONFIG_STM32_TIM4_PWM +# if !defined(CONFIG_STM32_TIM4_CHANNEL) +# error "CONFIG_STM32_TIM4_CHANNEL must be provided" +# elif CONFIG_STM32_TIM4_CHANNEL == 1 +# define PWM_TIM4_PINCFG GPIO_TIM4_CH1OUT +# elif CONFIG_STM32_TIM4_CHANNEL == 2 +# define PWM_TIM4_PINCFG GPIO_TIM4_CH2OUT +# elif CONFIG_STM32_TIM4_CHANNEL == 3 +# define PWM_TIM4_PINCFG GPIO_TIM4_CH3OUT +# elif CONFIG_STM32_TIM4_CHANNEL == 4 +# define PWM_TIM4_PINCFG GPIO_TIM4_CH4OUT +# else +# error "Unsupported value of CONFIG_STM32_TIM4_CHANNEL" +# endif +#endif + +#ifdef CONFIG_STM32_TIM5_PWM +# if !defined(CONFIG_STM32_TIM5_CHANNEL) +# error "CONFIG_STM32_TIM5_CHANNEL must be provided" +# elif CONFIG_STM32_TIM5_CHANNEL == 1 +# define PWM_TIM5_PINCFG GPIO_TIM5_CH1OUT +# elif CONFIG_STM32_TIM5_CHANNEL == 2 +# define PWM_TIM5_PINCFG GPIO_TIM5_CH2OUT +# elif CONFIG_STM32_TIM5_CHANNEL == 3 +# define PWM_TIM5_PINCFG GPIO_TIM5_CH3OUT +# elif CONFIG_STM32_TIM5_CHANNEL == 4 +# define PWM_TIM5_PINCFG GPIO_TIM5_CH4OUT +# else +# error "Unsupported value of CONFIG_STM32_TIM5_CHANNEL" +# endif +#endif + +#ifdef CONFIG_STM32_TIM8_PWM +# if !defined(CONFIG_STM32_TIM8_CHANNEL) +# error "CONFIG_STM32_TIM8_CHANNEL must be provided" +# elif CONFIG_STM32_TIM8_CHANNEL == 1 +# define PWM_TIM8_PINCFG GPIO_TIM8_CH1OUT +# elif CONFIG_STM32_TIM8_CHANNEL == 2 +# define PWM_TIM8_PINCFG GPIO_TIM8_CH2OUT +# elif CONFIG_STM32_TIM8_CHANNEL == 3 +# define PWM_TIM8_PINCFG GPIO_TIM8_CH3OUT +# elif CONFIG_STM32_TIM8_CHANNEL == 4 +# define PWM_TIM8_PINCFG GPIO_TIM8_CH4OUT +# else +# error "Unsupported value of CONFIG_STM32_TIM8_CHANNEL" +# endif +#endif + +#ifdef CONFIG_STM32_TIM9_PWM +# if !defined(CONFIG_STM32_TIM9_CHANNEL) +# error "CONFIG_STM32_TIM9_CHANNEL must be provided" +# elif CONFIG_STM32_TIM9_CHANNEL == 1 +# define PWM_TIM9_PINCFG GPIO_TIM9_CH1OUT +# elif CONFIG_STM32_TIM9_CHANNEL == 2 +# define PWM_TIM9_PINCFG GPIO_TIM9_CH2OUT +# elif CONFIG_STM32_TIM9_CHANNEL == 3 +# define PWM_TIM9_PINCFG GPIO_TIM9_CH3OUT +# elif CONFIG_STM32_TIM9_CHANNEL == 4 +# define PWM_TIM9_PINCFG GPIO_TIM9_CH4OUT +# else +# error "Unsupported value of CONFIG_STM32_TIM9_CHANNEL" +# endif +#endif + +#ifdef CONFIG_STM32_TIM10_PWM +# if !defined(CONFIG_STM32_TIM10_CHANNEL) +# error "CONFIG_STM32_TIM10_CHANNEL must be provided" +# elif CONFIG_STM32_TIM10_CHANNEL == 1 +# define PWM_TIM10_PINCFG GPIO_TIM10_CH1OUT +# elif CONFIG_STM32_TIM10_CHANNEL == 2 +# define PWM_TIM10_PINCFG GPIO_TIM10_CH2OUT +# elif CONFIG_STM32_TIM10_CHANNEL == 3 +# define PWM_TIM10_PINCFG GPIO_TIM10_CH3OUT +# elif CONFIG_STM32_TIM10_CHANNEL == 4 +# define PWM_TIM10_PINCFG GPIO_TIM10_CH4OUT +# else +# error "Unsupported value of CONFIG_STM32_TIM10_CHANNEL" +# endif +#endif + +#ifdef CONFIG_STM32_TIM11_PWM +# if !defined(CONFIG_STM32_TIM11_CHANNEL) +# error "CONFIG_STM32_TIM11_CHANNEL must be provided" +# elif CONFIG_STM32_TIM11_CHANNEL == 1 +# define PWM_TIM11_PINCFG GPIO_TIM11_CH1OUT +# elif CONFIG_STM32_TIM11_CHANNEL == 2 +# define PWM_TIM11_PINCFG GPIO_TIM11_CH2OUT +# elif CONFIG_STM32_TIM11_CHANNEL == 3 +# define PWM_TIM11_PINCFG GPIO_TIM11_CH3OUT +# elif CONFIG_STM32_TIM11_CHANNEL == 4 +# define PWM_TIM11_PINCFG GPIO_TIM11_CH4OUT +# else +# error "Unsupported value of CONFIG_STM32_TIM11_CHANNEL" +# endif +#endif + +#ifdef CONFIG_STM32_TIM12_PWM +# if !defined(CONFIG_STM32_TIM12_CHANNEL) +# error "CONFIG_STM32_TIM12_CHANNEL must be provided" +# elif CONFIG_STM32_TIM12_CHANNEL == 1 +# define PWM_TIM12_PINCFG GPIO_TIM12_CH1OUT +# elif CONFIG_STM32_TIM12_CHANNEL == 2 +# define PWM_TIM12_PINCFG GPIO_TIM12_CH2OUT +# elif CONFIG_STM32_TIM12_CHANNEL == 3 +# define PWM_TIM12_PINCFG GPIO_TIM12_CH3OUT +# elif CONFIG_STM32_TIM12_CHANNEL == 4 +# define PWM_TIM12_PINCFG GPIO_TIM12_CH4OUT +# else +# error "Unsupported value of CONFIG_STM32_TIM12_CHANNEL" +# endif +#endif + +#ifdef CONFIG_STM32_TIM13_PWM +# if !defined(CONFIG_STM32_TIM13_CHANNEL) +# error "CONFIG_STM32_TIM13_CHANNEL must be provided" +# elif CONFIG_STM32_TIM13_CHANNEL == 1 +# define PWM_TIM13_PINCFG GPIO_TIM13_CH1OUT +# elif CONFIG_STM32_TIM13_CHANNEL == 2 +# define PWM_TIM13_PINCFG GPIO_TIM13_CH2OUT +# elif CONFIG_STM32_TIM13_CHANNEL == 3 +# define PWM_TIM13_PINCFG GPIO_TIM13_CH3OUT +# elif CONFIG_STM32_TIM13_CHANNEL == 4 +# define PWM_TIM13_PINCFG GPIO_TIM13_CH4OUT +# else +# error "Unsupported value of CONFIG_STM32_TIM13_CHANNEL" +# endif +#endif + +#ifdef CONFIG_STM32_TIM14_PWM +# if !defined(CONFIG_STM32_TIM14_CHANNEL) +# error "CONFIG_STM32_TIM14_CHANNEL must be provided" +# elif CONFIG_STM32_TIM14_CHANNEL == 1 +# define PWM_TIM14_PINCFG GPIO_TIM14_CH1OUT +# elif CONFIG_STM32_TIM14_CHANNEL == 2 +# define PWM_TIM14_PINCFG GPIO_TIM14_CH2OUT +# elif CONFIG_STM32_TIM14_CHANNEL == 3 +# define PWM_TIM14_PINCFG GPIO_TIM14_CH3OUT +# elif CONFIG_STM32_TIM14_CHANNEL == 4 +# define PWM_TIM14_PINCFG GPIO_TIM14_CH4OUT +# else +# error "Unsupported value of CONFIG_STM32_TIM14_CHANNEL" +# endif +#endif + +/************************************************************************************ + * Public Types + ************************************************************************************/ + +/************************************************************************************ + * Public Data + ************************************************************************************/ + +#ifndef __ASSEMBLY__ + +#undef EXTERN +#if defined(__cplusplus) +#define EXTERN extern "C" +extern "C" { +#else +#define EXTERN extern +#endif + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: stm32_pwminitialize + * + * Description: + * Initialize one timer for use with the upper_level PWM driver. + * + * Input Parameters: + * timer - A number identifying the timer use. The number of valid timer + * IDs varies with the STM32 MCU and MCU family but is somewhere in + * the range of {1,..,14}. + * + * Returned Value: + * On success, a pointer to the STM32 lower half PWM driver is returned. + * NULL is returned on any failure. + * + ************************************************************************************/ + +EXTERN FAR struct pwm_lowerhalf_s *stm32_pwminitialize(int timer); + +#undef EXTERN +#if defined(__cplusplus) +} +#endif + +#endif /* __ASSEMBLY__ */ +#endif /* CONFIG_STM32_TIMx_PWM */ +#endif /* __ARCH_ARM_SRC_STM32_STM32_PWM_H */ |