diff options
Diffstat (limited to 'nuttx/binfmt/libnxflat/libnxflat_addrenv.c')
-rw-r--r-- | nuttx/binfmt/libnxflat/libnxflat_addrenv.c | 235 |
1 files changed, 235 insertions, 0 deletions
diff --git a/nuttx/binfmt/libnxflat/libnxflat_addrenv.c b/nuttx/binfmt/libnxflat/libnxflat_addrenv.c new file mode 100644 index 000000000..2d9255b28 --- /dev/null +++ b/nuttx/binfmt/libnxflat/libnxflat_addrenv.c @@ -0,0 +1,235 @@ +/**************************************************************************** + * binfmt/libnxflat/libnxflat_addrenv.c + * + * Copyright (C) 2012 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include <nuttx/config.h> + +#include <string.h> +#include <errno.h> +#include <debug.h> + +#include <nuttx/arch.h> +#include <nuttx/kmalloc.h> + +#include "libnxflat.h" + +/**************************************************************************** + * Pre-Processor Definitions + ****************************************************************************/ + +/**************************************************************************** + * Private Constant Data + ****************************************************************************/ + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: nxflat_addrenv_alloc + * + * Description: + * Allocate memory for the ELF image (elfalloc). If CONFIG_ADDRENV=n, + * elfalloc will be allocated using kzalloc(). If CONFIG_ADDRENV-y, then + * elfalloc will be allocated using up_addrenv_create(). In either case, + * there will be a unique instance of elfalloc (and stack) for each + * instance of a process. + * + * Input Parameters: + * loadinfo - Load state information + * envsize - The size (in bytes) of the address environment needed for the + * ELF image. + * + * Returned Value: + * Zero (OK) on success; a negated errno value on failure. + * + ****************************************************************************/ + +int nxflat_addrenv_alloc(FAR struct nxflat_loadinfo_s *loadinfo, size_t envsize) +{ + FAR struct dspace_s *dspace; +#ifdef CONFIG_ADDRENV + FAR void *vaddr; + hw_addrenv_t oldenv; + int ret; +#endif + + DEBUGASSERT(!loadinfo->dspace); + + /* Allocate the struct dspace_s container for the D-Space allocation */ + + dspace = (FAR struct dspace_s *)kmalloc(sizeof(struct dspace_s)); + if (dspace == 0) + { + bdbg("ERROR: Failed to allocate DSpace\n"); + return -ENOMEM; + } + +#ifdef CONFIG_ADDRENV + /* Create a D-Space address environment for the new NXFLAT task */ + + ret = up_addrenv_create(envsize, &loadinfo->addrenv); + if (ret < 0) + { + bdbg("ERROR: up_addrenv_create failed: %d\n", ret); + goto errout_with_dspace; + } + + /* Get the virtual address associated with the start of the address + * environment. This is the base address that we will need to use to + * access the D-Space region (but only if the address environment has been + * selected. + */ + + ret = up_addrenv_vaddr(loadinfo->addrenv, &vaddr); + if (ret < 0) + { + bdbg("ERROR: up_addrenv_vaddr failed: %d\n", ret); + goto errout_with_addrenv; + } + + /* Clear all of the allocated D-Space memory. We have to temporarily + * selected the D-Space address environment to do this. + */ + + ret = up_addrenv_select(loadinfo->addrenv, &oldenv); + if (ret < 0) + { + bdbg("ERROR: up_addrenv_select failed: %d\n", ret); + goto errout_with_addrenv; + } + + memset(vaddr, 0, envsize); + + ret = up_addrenv_restore(oldenv); + if (ret < 0) + { + bdbg("ERROR: up_addrenv_restore failed: %d\n", ret); + goto errout_with_addrenv; + } + + /* Success... save the fruits of our labor */ + + loadinfo->dspace = dspace; + dspace->crefs = 1; + dspace->region = (FAR uint8_t *)vaddr; + return OK; + +errout_with_addrenv: + (void)up_addrenv_destroy(loadinfo->addrenv); + loadinfo->addrenv = 0; + +errout_with_dspace: + kfree(dspace); + return ret; +#else + /* Allocate (and zero) memory to hold the ELF image */ + + dspace->region = (FAR uint8_t *)kzalloc(envsize); + if (!dspace->region) + { + kfree(dspace); + return -ENOMEM; + } + + loadinfo->dspace = dspace; + dspace->crefs = 1; + return OK; +#endif +} + +/**************************************************************************** + * Name: nxflat_addrenv_free + * + * Description: + * Release the address environment previously created by + * nxflat_addrenv_create(). This function is called only under certain + * error conditions after the the module has been loaded but not yet + * started. After the module has been started, the address environment + * will automatically be freed when the module exits. + * + * Input Parameters: + * loadinfo - Load state information + * + * Returned Value: + * None. + * + ****************************************************************************/ + +void nxflat_addrenv_free(FAR struct nxflat_loadinfo_s *loadinfo) +{ + FAR struct dspace_s *dspace; +#ifdef CONFIG_ADDRENV + int ret; +#endif + + DEBUGASSERT(loadinfo); + dspace = loadinfo->dspace; + + if (dspace) + { +#ifdef CONFIG_ADDRENV + /* Destroy the address environment */ + + ret = up_addrenv_destroy(loadinfo->addrenv); + if (ret < 0) + { + bdbg("ERROR: up_addrenv_destroy failed: %d\n", ret); + } + + loadinfo->addrenv = 0; +#else + /* Free the allocated D-Space region */ + + if (dspace->region) + { + kfree(dspace->region); + } +#endif + + /* Now destroy the D-Space container */ + + DEBUGASSERT(dspace->crefs == 1); + kfree(dspace); + loadinfo->dspace = NULL; + } +} |