diff options
Diffstat (limited to 'nuttx/configs/ez80f910200zco/ostest/Make.defs')
-rw-r--r-- | nuttx/configs/ez80f910200zco/ostest/Make.defs | 178 |
1 files changed, 178 insertions, 0 deletions
diff --git a/nuttx/configs/ez80f910200zco/ostest/Make.defs b/nuttx/configs/ez80f910200zco/ostest/Make.defs new file mode 100644 index 000000000..5fcc43c4b --- /dev/null +++ b/nuttx/configs/ez80f910200zco/ostest/Make.defs @@ -0,0 +1,178 @@ +############################################################################ +# configs/ez80f910200zco/ostest/Make.defs +# +# Copyright (C) 2008, 2009 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <spudmonkey@racsa.co.cr> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +include ${TOPDIR}/.config + +# These are the directories where the ZDS-II toolchain is installed + +ZDSVERSION := 4.11.1 +ZDSINSTALLDIR := C:/Program\ Files/ZiLOG/ZDSII_eZ80Acclaim!_$(ZDSVERSION) +ZDSBINDIR := $(ZDSINSTALLDIR)/bin +ZDSSTDINCDIR := $(ZDSINSTALLDIR)/include/std +ZDSZILOGINCDIR := $(ZDSINSTALLDIR)/include/zilog +ZDSSTDLIBDIR := $(ZDSINSTALLDIR)/lib/std +ZDSZILOGLIBDIR := $(ZDSINSTALLDIR)/lib/zilog + +# These are the same directories but with the directory separator +# character swapped as needed by the ZDS-II compiler + +WINTOOL := y +WTOPDIR := ${shell cygpath -w $(TOPDIR)} +WZDSSTDINCDIR := ${shell cygpath -w $(ZDSSTDINCDIR)} +WZDSZILOGINCDIR := ${shell cygpath -w $(ZDSZILOGINCDIR)} +WZDSSTDLIBDIR := ${shell cygpath -w $(ZDSSTDLIBDIR)} +WZDSZILOGLIBDIR := ${shell cygpath -w $(ZDSZILOGLIBDIR)} + +# Escaped versions + +ETOPDIR := ${shell echo "$(WTOPDIR)" | sed -e "s/ /%20/g"} +EZDSSTDINCDIR := ${shell echo "$(WZDSSTDINCDIR)" | sed -e "s/ /%20/g"} +EZDSZILOGINCDIR := ${shell echo "$(WZDSZILOGINCDIR)" | sed -e "s/ /%20/g"} + +# Assembler definitions + +ifeq ($(CONFIG_ARCH_CHIP_EZ80F91),y) +ARCHCPU = eZ80F91 +ARCHCPUDEF = _EZ80F91 +ARCHFAMILY = _EZ80ACCLAIM! +endif + +ifeq ("${CONFIG_DEBUG_SYMBOLS}","y") + ARCHASMOPTIMIZATION = -debug -NOsdiopt +else + ARCHASMOPTIMIZATION = -nodebug -NOsdiopt +endif + +ARCHASMCPUFLAGS = -cpu:$(ARCHCPU) -NOigcase +ARCHASMLIST = -list -NOlistmac -name -pagelen:56 -pagewidth:80 -quiet +ARCHASMWARNINGS = -warn +ARCHASMDEFINES = -define:$(ARCHCPUDEF)=1 -define:$(ARCHFAMILYDEF)=1 -define:__ASSEMBLY__ +ARCHASMINCLUDES = -include:'$(WTOPDIR)\include;$(WZDSSTDINCDIR);$(WZDSZILOGINCDIR)' +EARCHASMINCLUDES = -include:'$(ETOPDIR)\include;$(EZDSSTDINCDIR);$(EZDSZILOGINCDIR)' +AFLAGS = $(ARCHASMCPUFLAGS) $(ARCHASMINCLUDES) $(ARCHASMLIST) \ + $(ARCHASMWARNINGS) $(ARCHASMOPTIMIZATION) + +# Compiler definitions + +ifeq ("${CONFIG_DEBUG_SYMBOLS}","y") + ARCHOPTIMIZATION = -debug -reduceopt +else + ARCHOPTIMIZATION = -nodebug -optsize +endif + +ARCHCPUFLAGS = -chartype:S -promote -cpu:$(ARCHCPU) -NOgenprintf -NOmodsect \ + -asmsw:" $(ARCHASMCPUFLAGS) $(EARCHASMINCLUDES) $(ARCHASMWARNINGS) $(ARCHASMOPTIMIZATION)" +ARCHLIST = -keeplst -NOlist -NOlistinc -keepasm +ARCHPICFLAGS = +ARCHWARNINGS = -warn +ARCHDEFINES = -define:$(ARCHCPUDEF) -define:$(ARCHFAMILYDEF) +ARCHSTDINCLUDES = -stdinc:'$(WTOPDIR)\include;$(WZDSSTDINCDIR);$(WZDSZILOGINCDIR)' +ARCHUSRINCLUDES = -usrinc:'.' +ARCHINCLUDES = $(ARCHSTDINCLUDES) $(ARCHUSRINCLUDES) +CFLAGS = $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHLIST) \ + $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) + +CPPDEFINES = -D$(ARCHFAMILYDEF) -D$(ARCHCPUDEF) -D__ASSEMBLY__ +CPPINCLUDES = -I$(TOPDIR)/include +CPPFLAGS = $(CPPDEFINES) $(CPPINCLUDES) + +# Librarian definitions + +ARFLAGS = -quiet -warn + +# Linker definitions + +LINKCMDTEMPLATE = $(TOPDIR)/configs/ez80f910200zco/ostest/ostest.linkcmd + +# Tool names/pathes + +CROSSDEV = +CC = $(ZDSBINDIR)/ez80cc.exe +CPP = gcc -E +LD = $(ZDSBINDIR)/ez80link.exe +AS = $(ZDSBINDIR)/ez80asm.exe +AR = $(ZDSBINDIR)/ez80lib.exe + +# File extensions + +ASMEXT = .asm +OBJEXT = .obj +LIBEXT = .lib +EXEEXT = .lod +HEXEXT = .hex + +# These are the macros that will be used in the NuttX make system +# to compile and assembly source files and to insert the resulting +# object files into an archive + +define PREPROCESS + @echo "CPP: $1->$2" + @$(CPP) $(CPPFLAGS) $1 -o $2 +endef + +define COMPILE + @#echo "CC: $1" + @(wfile=`cygpath -w $1`; $(CC) $(CFLAGS) $$wfile) +endef + +define ASSEMBLE + @#echo "AS: $1" + @(wfile=`cygpath -w $1`; $(AS) $(AFLAGS) $$wfile) +endef + +define ARCHIVE + echo "AR: $2"; \ + $(AR) $(ARFLAGS) $1=-+$2 || { echo "$(AR) $1=-+$2 FAILED!" ; exit 1 ; } +endef + +define CLEAN + @rm -f *.obj *.src *.lib *.hex *.lod *.lst +endef + +# This is the tool to use for dependencies (i.e., none) + +MKDEP = $(TOPDIR)/tools/mknulldeps.sh + +# ZDS-II cannot follow Cygwin soft links, so we will have to use directory copies + +DIRLINK = $(TOPDIR)/tools/winlink.sh +DIRUNLINK = $(TOPDIR)/tools/unlink.sh + +# Linux/Cygwin host tool definitions + +HOSTCC = gcc +HOSTINCLUDES = -I. +HOSTCFLAGS = -Wall -wstrict-prototypes -Wshadow -g -pipe +HOSTLDFLAGS = |