diff options
Diffstat (limited to 'nuttx/drivers/Kconfig')
-rw-r--r-- | nuttx/drivers/Kconfig | 445 |
1 files changed, 0 insertions, 445 deletions
diff --git a/nuttx/drivers/Kconfig b/nuttx/drivers/Kconfig deleted file mode 100644 index f3d2c871a..000000000 --- a/nuttx/drivers/Kconfig +++ /dev/null @@ -1,445 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see misc/tools/kconfig-language.txt. -# - -config DISABLE_POLL - bool "Disable driver poll interfaces" - default n - ---help--- - The sizes of drivers can be reduced if the poll() method is not - supported. If you do not use poll() or select(), then you can - select DISABLE_POLL to reduce the code footprint by a small amount. - -config DEV_NULL - bool "Enable /dev/null" - default y - -config DEV_ZERO - bool "Enable /dev/zero" - default n - -config ARCH_HAVE_RNG - bool - -config DEV_RANDOM - bool "Enable /dev/random" - default n - depends on ARCH_HAVE_RNG - -config LOOP - bool "Enable loop device" - default n - ---help--- - Supports the standard loop device that can be used to export a - file (or character device) as a block device. See losetup() and - loteardown() in include/nuttx/fs/fs.h. - -config RAMDISK - bool "RAM Disk Support" - default n - ---help--- - Can be used to set up a block of memory or (read-only) FLASH as - a block driver that can be mounted as a files system. See - include/nuttx/ramdisk.h. - -menuconfig CAN - bool "CAN Driver Support" - default n - ---help--- - This selection enables building of the "upper-half" CAN driver. - See include/nuttx/can.h for further CAN driver information. - -if CAN -config CAN_EXTID - bool "CAN extended IDs" - default n - ---help--- - Enables support for the 29-bit extended ID. Default Standard 11-bit - IDs. - -config CAN_FIFOSIZE - int "CAN driver I/O buffer size" - default 8 - ---help--- - The size of the circular buffer of CAN messages. Default: 8 - -config CAN_NPENDINGRTR - int "Number of pending RTRs" - default 4 - ---help--- - The size of the list of pending RTR requests. Default: 4 - -config CAN_LOOPBACK - bool "CAN extended IDs" - default n - ---help--- - A CAN driver may or may not support a loopback mode for testing. If the - driver does support loopback mode, the setting will enable it. (If the - driver does not, this setting will have no effect). - -endif - -menuconfig PWM - bool "PWM Driver Support" - default n - ---help--- - This selection enables building of the "upper-half" PWM driver. - See include/nuttx/pwm.h for further PWM driver information. - -if PWM -config PWM_PULSECOUNT - bool "PWM Pulse Count Support" - default n - ---help--- - Some hardware will support generation of a fixed number of pulses. - This might be used, for example to support a stepper motor. If the - hardware will support a fixed pulse count, then this configuration - should be set to enable the capability. - -endif - -menuconfig I2C - bool "I2C Driver Support" - default n - ---help--- - This selection enables building of the "upper-half" I2C driver. - See include/nuttx/i2c.h for further I2C driver information. - -config I2C_SLAVE - bool "I2C Slave" - default n - depends on I2C - -config I2C_TRANSFER - bool "Support the I2C transfer() method" - default n - depends on I2C - -config I2C_WRITEREAD - bool "Support the I2C writeread() method" - default n - depends on I2C - -config I2C_POLLED - bool "Polled I2C (no interrupts)" - default n - depends on I2C - -config I2C_TRACE - bool "Enable I2C trace debug" - default n - depends on I2C - -config I2C_NTRACE - bool "Enable I2C trace debug" - default n - depends on I2C_TRACE - -config ARCH_HAVE_I2CRESET - bool - -config I2C_RESET - bool "Support up_i2creset" - default n - depends on I2C && ARCH_HAVE_I2CRESET - -menuconfig SPI - bool "SPI Driver Support" - default n - ---help--- - This selection enables selection of common SPI options. This option - should be enabled by all platforms that support SPI interfaces. - See include/nuttx/spi.h for further SPI driver information. - -if SPI -config SPI_OWNBUS - bool "SPI single device" - default n - ---help--- - Set if there is only one active device on the SPI bus. No locking or - SPI configuration will be performed. It is not necessary for clients to - lock, re-configure, etc.. - -config SPI_EXCHANGE - bool "SPI exchange" - default y - ---help--- - Driver supports a single exchange method (vs a recvblock() and - sndblock() methods). - -config SPI_CMDDATA - bool "SPI CMD/DATA" - default n - ---help--- - Devices on the SPI bus require out-of-band support to distinguish - command transfers from data transfers. Such devices will often support - either 9-bit SPI (yech) or 8-bit SPI and a GPIO output that selects - between command and data. - -endif - -menuconfig RTC - bool "RTC Driver Support" - default n - ---help--- - This selection enables configuration of a real time clock (RTCdriver. - See include/nuttx/rtc.h for further watchdog timer driver information. - Most RTC drivers are MCU specific and may require other specific - settings. - -config RTC_DATETIME - bool "Date/Time RTC Support" - default n - depends on RTC - ---help--- - There are two general types of RTC: (1) A simple battery backed - counter that keeps the time when power is down, and (2) a full - date / time RTC the provides the date and time information, often in - BCD format. If RTC_DATETIME is selected, it specifies this second kind - of RTC. In this case, the RTC is used to "seed" the normal NuttX timer - and the NuttX system timer provides for higher resolution time. - -config RTC_HIRES - bool "Hi-Res RTC Support" - default n - depends on RTC && !RTC_DATETIME - ---help--- - If RTC_DATETIME not selected, then the simple, battery backed counter - is used. There are two different implementations of such simple - counters based on the time resolution of the counter: The typical RTC - keeps time to resolution of 1 second, usually supporting a 32-bit - time_t value. In this case, the RTC is used to "seed" the normal NuttX - timer and the NuttX timer provides for higherresoution time. - - If RTC_HIRES is enabled in the NuttX configuration, then the RTC - provides higher resolution time and completely replaces the system - timer for purpose of date and time. - -config RTC_FREQUENCY - int "Hi-Res RTC frequency" - default 1 - depends on RTC && !RTC_DATETIME && RTC_HIRES - ---help--- - If RTC_HIRES is defined, then the frequency of the high resolution RTC - must be provided. If RTC_HIRES is not defined, RTC_FREQUENCY is - assumed to be one Hz. - -config RTC_ALARM - bool "RTC Alarm Support" - default n - depends on RTC - ---help--- - Enable if the RTC hardware supports setting of an alarm. A callback - function will be executed when the alarm goes off. - -menuconfig WATCHDOG - bool "Watchdog Timer Support" - default n - ---help--- - This selection enables building of the "upper-half" watchdog timer - driver. See include/nuttx/watchdog.h for further watchdog timer driver - information. - -if WATCHDOG -endif - -menuconfig ANALOG - bool "Analog Device(ADC/DAC) Support" - default n - ---help--- - This directory holds implementations of analog device drivers. - This includes drivers for Analog to Digital Conversion (ADC) as - well as drivers for Digital to Analog Conversion (DAC). - See include/nuttx/analog/*.h for registration information. - -if ANALOG -source drivers/analog/Kconfig -endif - -menuconfig BCH - bool "Block-to-Character (BCH) Support" - default n - ---help--- - Contains logic that may be used to convert a block driver into - a character driver. This is the complementary conversion as that - performed by loop.c. See include/nuttx/fs/fs.h for registration - information. - -if BCH -source drivers/bch/Kconfig -endif - -menuconfig INPUT - bool "Input Device Support" - default n - ---help--- - This directory holds implementations of input device drivers. - This includes such things as touchscreen and keypad drivers. - See include/nuttx/input/*.h for registration information. - -if INPUT -source drivers/input/Kconfig -endif - -menuconfig LCD - bool "LCD Driver Support" - default n - select NX_LCDDRIVER - ---help--- - Drivers for parallel and serial LCD and OLED type devices. These - drivers support interfaces as defined in include/nuttx/lcd/lcd.h - - This selection is necessary to enable support for LCD drivers in - drivers/lcd as well as for board-specific LCD drivers in the configs/ - subdirectories. - -if LCD -source drivers/lcd/Kconfig -endif - -menuconfig MMCSD - bool "MMC/SD Driver Support" - default n - ---help--- - Support for MMC/SD block drivers. MMC/SD block drivers based on - SPI and SDIO/MCI interfaces are supported. See include/nuttx/mmcsd.h - and include/nuttx/sdio.h for further information. - -if MMCSD -source drivers/mmcsd/Kconfig -endif - -menuconfig MTD - bool "Memory Technology Device (MTD) Support" - default n - ---help--- - Memory Technology Device (MTD) drivers. Some simple drivers for - memory technologies like FLASH, EEPROM, NVRAM, etc. See - include/nuttx/mtd.h - - (Note: This is a simple memory interface and should not be - confused with the "real" MTD developed at infradead.org. This - logic is unrelated; I just used the name MTD because I am not - aware of any other common way to refer to this class of devices). - -if MTD -source drivers/mtd/Kconfig -endif - -menuconfig NETDEVICES - bool "Network Device Support" - default n - depends on NET - ---help--- - Network interface drivers. See also include/nuttx/net/net.h - -if NETDEVICES -source drivers/net/Kconfig -endif - -menuconfig PIPES - bool "FIFO and named pipe drivers" - default n - ---help--- - FIFO and named pipe drivers. Standard interfaces are declared - in include/unistd.h - -if PIPES -source drivers/pipes/Kconfig -endif - -config PM - bool "Power management (PM) driver interfaces" - default n - ---help--- - Power management (PM) driver interfaces. These interfaces are used - to manage power usage of a platform by monitoring driver activity - and by placing drivers into reduce power usage modes when the - drivers are not active. - -menuconfig POWER - bool "Power Management Support" - default n - ---help--- - Enable building of power-related devices (battery monitors, chargers, - etc). - -if POWER -source drivers/power/Kconfig -endif - -menuconfig SENSORS - bool "Sensor Device Support" - default n - ---help--- - Drivers for various sensors - -if SENSORS -source drivers/sensors/Kconfig -endif - -menuconfig SERCOMM_CONSOLE - bool "Osmocom-bb Sercomm Driver Support" - default n - ---help--- - Sercomm is the transport used by osmocom-bb that runs on top of serial. - See http://bb.osmocom.org/trac/wiki/nuttx-bb/run for detailed the usage - of nuttx with sercomm. - - drivers/sercomm is only built if SERCOMM_CONSOLE in the NuttX - configuration file. If you attempt to build this driver without - osmocom-bb, you will get compilation errors because of header files - that are needed from the osmocom-bb. - -if SERCOMM -source drivers/sercomm/Kconfig -endif - -menuconfig SERIAL - bool "Serial Driver Support" - default y - ---help--- - Front-end character drivers for chip-specific UARTs. This provide - some TTY-like functionality and are commonly used (but not required - for) the NuttX system console. See also include/nuttx/serial/serial.h - -if SERIAL -source drivers/serial/Kconfig -endif - -menuconfig USBDEV - bool "USB Device Driver Support" - default n - ---help--- - USB device drivers. See also include/nuttx/usb/usbdev.h - -if USBDEV -source drivers/usbdev/Kconfig -endif - -menuconfig USBHOST - bool "USB Host Driver Support" - default n - ---help--- - USB host drivers. See also include/nuttx/usb/usbhost.h - -if USBHOST -source drivers/usbhost/Kconfig -endif - -menuconfig WIRELESS - bool "Wireless Device Support" - default n - ---help--- - Drivers for various wireless devices. - -if WIRELESS -source drivers/wireless/Kconfig -endif - -comment "System Logging Device Options" - -source drivers/syslog/Kconfig - - |