1 files changed, 0 insertions, 79 deletions
diff --git a/nuttx/drivers/mmcsd/Kconfig b/nuttx/drivers/mmcsd/Kconfig
deleted file mode 100644
index 2d9a04bbb..000000000
--- a/nuttx/drivers/mmcsd/Kconfig
+++ /dev/null
@@ -1,79 +0,0 @@
-#
-# For a description of the syntax of this configuration file,
-# see misc/tools/kconfig-language.txt.
-#
-
-config MMCSD_NSLOTS
-	int "Number of MMC/SD slots"
-	default 1
-	---help---
-		Number of MMC/SD slots supported by the
-		driver. Default is one.
-
-config MMCSD_READONLY
-	bool "Disable MMC/SD write access"
-	default n
-	---help---
-		Provide read-only access.  Default is
-		Read/Write
-
-config MMCSD_MULTIBLOCK_DISABLE
-	bool "Disable MMC/SD multiblock transfer"
-	default n
-	---help---
-		Use only the single block transfer method.
-		This setting is used to work around buggy SDIO drivers that cannot handle
-		multiple block transfers.
-
-config MMCSD_MMCSUPPORT
-	bool "MMC cards support"
-	default y
-	---help---
-		Enable support for MMC cards
-
-config MMCSD_HAVECARDDETECT
-	bool "MMC/SD card detection"
-	default y
-	---help---
-		SDIO driver card detection is
-		100% accurate
-
-config MMCSD_SPI
-	bool "MMC/SD SPI transfer support"
-	default y
-	depends on SPI
-
-config MMCSD_SPICLOCK
-	int "MMC/SD maximum SPI clock"
-	default 20000000
-	depends on MMCSD_SPI
-	---help---
-		Maximum SPI clock to drive MMC/SD card.
-		Default is 20MHz.
-
-config MMCSD_SDIO
-	bool "MMC/SD sdio transfer support"
-	default n
-
-if MMCSD_SDIO
-config SDIO_DMA
-	bool "SDIO dma support"
-	default n
-	---help---
-		SDIO driver supports DMA
-
-config SDIO_MUXBUS
-	bool "SDIO bus share support"
-	default n
-	---help---
-		Set this SDIO interface if the SDIO interface
-		or hardware resources are shared with other drivers.
-
-config SDIO_WIDTH_D1_ONLY
-	bool "SDIO 1-bit transfer"
-	default n
-	---help---
-		Select 1-bit transfer mode.  Default:
-		4-bit transfer mode.
-endif
-