diff options
Diffstat (limited to 'nuttx/drivers/mtd/skeleton.c')
-rw-r--r-- | nuttx/drivers/mtd/skeleton.c | 275 |
1 files changed, 0 insertions, 275 deletions
diff --git a/nuttx/drivers/mtd/skeleton.c b/nuttx/drivers/mtd/skeleton.c deleted file mode 100644 index a2fb98238..000000000 --- a/nuttx/drivers/mtd/skeleton.c +++ /dev/null @@ -1,275 +0,0 @@ -/**************************************************************************** - * drivers/mtd/skeleton.c - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/**************************************************************************** - * Included Files - ****************************************************************************/ - -#include <nuttx/config.h> - -#include <sys/types.h> -#include <stdint.h> -#include <errno.h> - -#include <nuttx/fs/ioctl.h> -#include <nuttx/mtd.h> - -/**************************************************************************** - * Pre-processor Definitions - ****************************************************************************/ - -/**************************************************************************** - * Private Types - ****************************************************************************/ - -/* This type represents the state of the MTD device. The struct mtd_dev_s - * must appear at the beginning of the definition so that you can freely - * cast between pointers to struct mtd_dev_s and struct skel_dev_s. - */ - -struct skel_dev_s -{ - struct mtd_dev_s mtd; - - /* Other implementation specific data may follow here */ -}; - -/**************************************************************************** - * Private Function Prototypes - ****************************************************************************/ - -/* MTD driver methods */ - -static int skel_erase(FAR struct mtd_dev_s *dev, off_t startblock, size_t nblocks); -static ssize_t skel_bread(FAR struct mtd_dev_s *dev, off_t startblock, size_t nblocks, - FAR uint8_t *buf); -static ssize_t skel_bwrite(FAR struct mtd_dev_s *dev, off_t startblock, size_t nblocks, - FAR const uint8_t *buf); -static ssize_t skel_read(FAR struct mtd_dev_s *dev, off_t offset, size_t nbytes, - FAR uint8_t *buffer); -static int skel_ioctl(FAR struct mtd_dev_s *dev, int cmd, unsigned long arg); - -/**************************************************************************** - * Private Data - ****************************************************************************/ - -static struct skel_dev_s g_skeldev = -{ - { skel_erase, skel_rbead, skel_bwrite, skel_read, skel_ioctl }, - /* Initialization of any other implemenation specific data goes here */ -}; - -/**************************************************************************** - * Private Functions - ****************************************************************************/ - -/**************************************************************************** - * Name: skel_erase - ****************************************************************************/ - -static int skel_erase(FAR struct mtd_dev_s *dev, off_t startblock, size_t nblocks) -{ - FAR struct skel_dev_s *priv = (FAR struct skel_dev_s *)dev; - - /* The interface definition assumes that all erase blocks ar the same size. - * If that is not true for this particular device, then transform the - * start block and nblocks as necessary. - */ - - /* Erase the specified blocks and return status (OK or a negated errno) */ - - return OK; -} - -/**************************************************************************** - * Name: skel_bread - ****************************************************************************/ - -static ssize_t skel_bread(FAR struct mtd_dev_s *dev, off_t startblock, size_t nblocks, - FAR uint8_t *buf) -{ - FAR struct skel_dev_s *priv = (FAR struct skel_dev_s *)dev; - - /* The interface definition assumes that all read/write blocks ar the same size. - * If that is not true for this particular device, then transform the - * start block and nblocks as necessary. - */ - - /* Read the specified blocks into the provided user buffer and return status - * (The positive, number of blocks actually read or a negated errno). - */ - - return 0; -} - -/**************************************************************************** - * Name: skel_bwrite - ****************************************************************************/ - -static ssize_t skel_bwrite(FAR struct mtd_dev_s *dev, off_t startblock, size_t nblocks, - FAR const uint8_t *buf) -{ - FAR struct skel_dev_s *priv = (FAR struct skel_dev_s *)dev; - - /* The interface definition assumes that all read/write blocks ar the same size. - * If that is not true for this particular device, then transform the - * start block and nblocks as necessary. - */ - - /* Write the specified blocks from the provided user buffer and return status - * (The positive, number of blocks actually written or a negated errno) - */ - - return 0; -} - -/**************************************************************************** - * Name: skel_read - ****************************************************************************/ - -static ssize_t skel_read(FAR struct mtd_dev_s *dev, off_t offset, size_t nbytes, - FAR uint8_t *buffer) -{ - FAR struct skel_dev_s *priv = (FAR struct skel_dev_s *)dev; - - /* Some devices may support byte oriented read (optional). Byte-oriented - * writing is inherently block oriented on most MTD devices and is not supported. - * It is recommended that low-level drivers not support read() if it requires - * buffering -- let the higher level logic handle that. If the read method is - * not implemented, just set the method pointer to NULL in the struct mtd_dev_s - * instance. - */ - - /* The interface definition assumes that all read/write blocks ar the same size. - * If that is not true for this particular device, then transform the - * start block and nblocks as necessary. - */ - - /* Read the specified blocks into the provided user buffer and return status - * (The positive, number of blocks actually read or a negated errno) - */ - - return 0; -} - -/**************************************************************************** - * Name: skel_ioctl - ****************************************************************************/ - -static int skel_ioctl(FAR struct mtd_dev_s *dev, int cmd, unsigned long arg) -{ - FAR struct skel_dev_s *priv = (FAR struct skel_dev_s *)dev; - int ret = -EINVAL; /* Assume good command with bad parameters */ - - switch (cmd) - { - case MTDIOC_GEOMETRY: - { - FAR struct mtd_geometry_s *geo = (FARstruct mtd_geometry_s *)arg; - if (geo) - { - /* Populate the geometry structure with information need to know - * the capacity and how to access the device. - * - * NOTE: that the device is treated as though it where just an array - * of fixed size blocks. That is most likely not true, but the client - * will expect the device logic to do whatever is necessary to make it - * appear so. - */ - - geo->blocksize = 512; /* Size of one read/write block */ - geo->erasesize = 4096; /* Size of one erase block */ - geo->neraseblocks = 1024; /* Number of erase blocks */ - ret = OK; - } - } - break; - - case MTDIOC_XIPBASE: - { - FAR void **ppv = (FAR void**)arg; - - if (ppv) - { - /* If media is directly acccesible, return (void*) base address - * of device memory. NULL otherwise. It is acceptable to omit - * this case altogether and simply return -ENOTTY. - */ - - *ppv = NULL; - ret = OK; - } - } - break; - - case MTDIOC_BULKERASE: - { - /* Erase the entire device */ - - ret = OK; - } - break; - - default: - ret = -ENOTTY; /* Bad command */ - break; - } - - return ret; -} - -/**************************************************************************** - * Public Functions - ****************************************************************************/ - -/**************************************************************************** - * Name: skel_initialize - * - * Description: - * Create and initialize an MTD device instance. MTD devices are not - * registered in the file system, but are created as instances that can - * be bound to other functions (such as a block or character driver front - * end). - * - ****************************************************************************/ - -void skel_initialize(void) -{ - /* Perform initialization as necessary */ - - /* Return the implementation-specific state structure as the MTD device */ - - return (FAR struct mtd_dev_s *)&g_skeldev; -} |