diff options
Diffstat (limited to 'nuttx/drivers/power/pm_changestate.c')
-rw-r--r-- | nuttx/drivers/power/pm_changestate.c | 227 |
1 files changed, 0 insertions, 227 deletions
diff --git a/nuttx/drivers/power/pm_changestate.c b/nuttx/drivers/power/pm_changestate.c deleted file mode 100644 index f64760f55..000000000 --- a/nuttx/drivers/power/pm_changestate.c +++ /dev/null @@ -1,227 +0,0 @@ -/**************************************************************************** - * drivers/power/pm_changestate.c - * - * Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/**************************************************************************** - * Included Files - ****************************************************************************/ - -#include <nuttx/config.h> - -#include <nuttx/power/pm.h> -#include <arch/irq.h> - -#include "pm_internal.h" - -#ifdef CONFIG_PM - -/**************************************************************************** - * Pre-processor Definitions - ****************************************************************************/ - -/**************************************************************************** - * Private Types - ****************************************************************************/ - -/**************************************************************************** - * Private Function Prototypes - ****************************************************************************/ - -/**************************************************************************** - * Private Data - ****************************************************************************/ - -/**************************************************************************** - * Public Data - ****************************************************************************/ - -/**************************************************************************** - * Private Functions - ****************************************************************************/ - -/**************************************************************************** - * Name: pm_prepall - * - * Description: - * Prepare every driver for the state change. - * - * Input Parameters: - * newstate - Identifies the new PM state - * - * Returned Value: - * 0 (OK) means that the callback function for all registered drivers - * returned OK (meaning that they accept the state change). Non-zero - * means that one of the drivers refused the state change. In this case, - * the system will revert to the preceding state. - * - * Assumptions: - * Interrupts are disabled. - * - ****************************************************************************/ - -static int pm_prepall(enum pm_state_e newstate) -{ - FAR sq_entry_t *entry; - int ret = OK; - - /* Visit each registered callback structure. */ - - for (entry = sq_peek(&g_pmglobals.registry); - entry && ret == OK; - entry = sq_next(entry)) - { - /* Is the prepare callback supported? */ - - FAR struct pm_callback_s *cb = (FAR struct pm_callback_s *)entry; - if (cb->prepare) - { - /* Yes.. prepare the driver */ - - ret = cb->prepare(cb, newstate); - } - } - - return ret; -} - -/**************************************************************************** - * Name: pm_changeall - * - * Description: - * Inform all drivers of the state change. - * - * Input Parameters: - * newstate - Identifies the new PM state - * - * Returned Value: - * None - * - * Assumptions: - * Interrupts are disabled. - * - ****************************************************************************/ - -static inline void pm_changeall(enum pm_state_e newstate) -{ - FAR sq_entry_t *entry; - - /* Visit each registered callback structure. */ - - for (entry = sq_peek(&g_pmglobals.registry); entry; entry = sq_next(entry)) - { - /* Is the notification callback supported? */ - - FAR struct pm_callback_s *cb = (FAR struct pm_callback_s *)entry; - if (cb->notify) - { - /* Yes.. notify the driver */ - - cb->notify(cb, newstate); - } - } -} - -/**************************************************************************** - * Public Functions - ****************************************************************************/ - -/**************************************************************************** - * Name: pm_changestate - * - * Description: - * This function is used by platform-specific power management logic. It - * will announce the power management power management state change to all - * drivers that have registered for power management event callbacks. - * - * Input Parameters: - * newstate - Identifies the new PM state - * - * Returned Value: - * 0 (OK) means that the callback function for all registered drivers - * returned OK (meaning that they accept the state change). Non-zero - * means that one of the drivers refused the state change. In this case, - * the system will revert to the preceding state. - * - * Assumptions: - * It is assumed that interrupts are disabled when this function is - * called. This function is probably called from the IDLE loop... the - * lowest priority task in the system. Changing driver power management - * states may result in renewed system activity and, as a result, can - * suspend the IDLE thread before it completes the entire state change - * unless interrupts are disabled throughout the state change. - * - ****************************************************************************/ - -int pm_changestate(enum pm_state_e newstate) -{ - irqstate_t flags; - int ret; - - /* Disable interrupts throught this operation... changing driver states - * could cause additional driver activity that might interfere with the - * state change. When the state change is complete, interrupts will be - * re-enabled. - */ - - flags = irqsave(); - - /* First, prepare the drivers for the state change. In this phase, - * drivers may refuse the state state change. - */ - - ret = pm_prepall(newstate); - if (ret != OK) - { - /* One or more drivers is not ready for this state change. Revert to - * the preceding state. - */ - - newstate = g_pmglobals.state; - (void)pm_prepall(newstate); - } - - /* All drivers have agreed to the state change (or, one or more have - * disagreed and the state has been reverted). Set the new state. - */ - - pm_changeall(newstate); - g_pmglobals.state = newstate; - - /* Restore the interrupt state */ - - irqrestore(flags); - return ret; -} - -#endif /* CONFIG_PM */ |