1 files changed, 0 insertions, 73 deletions
diff --git a/nuttx/drivers/syslog/Kconfig b/nuttx/drivers/syslog/Kconfig
deleted file mode 100644
index 3ec8c7490..000000000
--- a/nuttx/drivers/syslog/Kconfig
+++ /dev/null
@@ -1,73 +0,0 @@
-#
-# For a description of the syntax of this configuration file,
-# see misc/tools/kconfig-language.txt.
-#
-
-comment "System Logging"
-
-config RAMLOG
-	bool "RAM log device support"
-	default n
-	---help---
-		This is a driver that was intended to support debugging output,
-		aka syslogging, when the normal serial output is not available.
-		For example, if you are using a telnet or USB serial console,
-		the debug output will get lost.  However, the RAMLOG device should
-		be usable even if system logging is disabled.
-
-		This driver is similar to a pipe in that it saves the debugging
-		output in a FIFO in RAM.  It differs from a pipe in numerous
-		details as needed to support logging.
-
-if RAMLOG
-config RAMLOG_SYSLOG
-	bool "Use RAMLOG for SYSLOG"
-	default n
-	depends on SYSLOG
-	---help---
-		Use the RAM logging device for the syslogging interface.  If this feature
-		is enabled (along with SYSLOG), then all debug output (only) will be re-directed
-		to the circular buffer in RAM.  This RAM log can be view from NSH using the
-		'dmesg'command.
-
-		Do not enable more than one SYSLOG device.
-
-config RAMLOG_CONSOLE
-	bool "Use RAMLOG for /dev/console"
-	default n
-	depends on DEV_CONSOLE
-	---help---
-		Use the RAM logging device as a system console. If this feature is enabled (along
-		with DEV_CONSOLE), then all console output will be re-directed to a circular
-		buffer in RAM.  This is useful, for example, if the only console is a Telnet
-		console.  Then in that case, console output from non-Telnet threads will go to
-		the circular buffer and can be viewed using the NSH 'dmesg' command.
-
-config RAMLOG_CONSOLE_BUFSIZE
-	int "RAMLOG buffer size"
-	default 1024
-	depends on RAMLOG_SYSLOG || RAMLOG_CONSOLE
-	---help---
-		Size of the console RAM log.  Default: 1024
-
-config RAMLOG_CRLF
-	bool "RAMLOG CR/LF"
-	default n
-	---help---
-		Pre-pend a carriage return before every linefeed that goes into the RAM log.
-
-config RAMLOG_NONBLOCKING
-	bool "RAMLOG non-block reads"
-	default y
-	---help---
-		Reading from the RAMLOG will never block if the RAMLOG is empty.  If the RAMLOG
-		is empty, then zero is returned (usually interpreted as end-of-file).
-
-config RAMLOG_NPOLLWAITERS
-	int "RAMLOG number of poll waiters"
-	default 4
-	depends on !DISABLE_POLL
-	---help---
-		The maximum number of threads that may be waiting on the poll method.
-
-endif