1 files changed, 0 insertions, 64 deletions
diff --git a/nuttx/drivers/syslog/README.txt b/nuttx/drivers/syslog/README.txt
deleted file mode 100644
index bfef73ae8..000000000
--- a/nuttx/drivers/syslog/README.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-drivers/syslog README File
-==========================
-
-This README file discusses the SYLOG drivers that can be found in the
-drivers/syslog directory.  In NuttX, syslog output is equivalent to
-debug output and, therefore, the syslogging interfaces are defined in the
-header file include/debug.h.
-
-By default, all system log output goes to console (/dev/console).  But that
-behavior can be changed by the defining CONFIG_SYSLOG in the NuttX
-configuration.  In that, case all low-level debug output will go through
-syslog_putc().
-
-One version of syslog_putc() is defined in fs/fs_syslog.c; that version is
-used when CONFIG_SYSLOG_CHAR is defined.  That version of syslog_putc()
-just integrates with the file system to re-direct debug output to a
-character device or to a file. A disadvantage of using the generic character
-device for the SYSLOG is that it cannot handle debug output generated from
-interrupt level handles.
-
-If CONFIG_SYSLOG_CHAR is not defined, then other custom SYSLOG drivers
-can be used.  These custom SYSLOG drivers can do things like handle
-unusual logging media and since they can avoid the general file system
-interfaces, can be designed to support debug output from interrupt handlers.
-
-Those custom SYSLOG drivers reside in this directory.
-
-ramlog.c
---------
-  The RAM logging driver is a driver that was intended to support debugging
-  output (syslogging) when the normal serial output is not available.  For
-  example, if you are using a telnet or USB serial console, the debug
-  output will get lost.
-
-  The RAM logging  driver is similar to a pipe in that it saves the
-  debugging output in a FIFO in RAM.  It differs from a pipe in numerous
-  details as needed to support logging.
-
-  This driver is built when CONFIG_RAMLOG is defined in the Nuttx
-  configuration.
-
-  Configuration options:
-  
-    CONFIG_RAMLOG - Enables the RAM logging feature
-    CONFIG_RAMLOG_CONSOLE - Use the RAM logging device as a system console.
-      If this feature is enabled (along with CONFIG_DEV_CONSOLE), then all
-      console output will be re-directed to a circular buffer in RAM.  This
-      is useful, for example, if the only console is a Telnet console.  Then
-      in that case, console output from non-Telnet threads will go to the
-      circular buffer and can be viewed using the NSH 'dmesg' command.
-    CONFIG_RAMLOG_SYSLOG - Use the RAM logging device for the syslogging
-      interface.  If this feature is enabled (along with CONFIG_SYSLOG),
-      then all debug output (only) will be re-directed to the circular
-      buffer in RAM.  This RAM log can be view from NSH using the 'dmesg'
-      command.  NOTE:  Unlike the limited, generic character driver SYSLOG
-      device, the RAMLOG *can* be used to generate debug output from interrupt
-      level handlers.
-    CONFIG_RAMLOG_NPOLLWAITERS - The number of threads than can be waiting
-      for this driver on poll().  Default: 4
-
-   If CONFIG_RAMLOG_CONSOLE or CONFIG_RAMLOG_SYSLOG is selected, then the
-   following may also be provided:
-
-   CONFIG_RAMLOG_CONSOLE_BUFSIZE - Size of the console RAM log.  Default: 1024