diff options
Diffstat (limited to 'nuttx/drivers')
-rw-r--r-- | nuttx/drivers/Makefile | 33 | ||||
-rw-r--r-- | nuttx/drivers/analog/Make.defs | 6 | ||||
-rw-r--r-- | nuttx/drivers/bch/Make.defs | 4 | ||||
-rw-r--r-- | nuttx/drivers/input/Make.defs | 8 | ||||
-rw-r--r-- | nuttx/drivers/lcd/Make.defs | 6 | ||||
-rw-r--r-- | nuttx/drivers/lcd/ug-2864ambag01.c | 1161 | ||||
-rw-r--r-- | nuttx/drivers/loop.c | 2 | ||||
-rw-r--r-- | nuttx/drivers/mmcsd/Make.defs | 16 | ||||
-rw-r--r-- | nuttx/drivers/mmcsd/mmcsd_sdio.c | 3 | ||||
-rw-r--r-- | nuttx/drivers/mtd/Make.defs | 4 | ||||
-rw-r--r-- | nuttx/drivers/mtd/at25.c | 708 | ||||
-rw-r--r-- | nuttx/drivers/mtd/ftl.c | 31 | ||||
-rw-r--r-- | nuttx/drivers/power/Make.defs | 4 | ||||
-rw-r--r-- | nuttx/drivers/sensors/Make.defs | 4 | ||||
-rw-r--r-- | nuttx/drivers/serial/Kconfig | 36 | ||||
-rw-r--r-- | nuttx/drivers/serial/serial.c | 4 | ||||
-rw-r--r-- | nuttx/drivers/usbdev/Make.defs | 2 | ||||
-rw-r--r-- | nuttx/drivers/usbhost/Make.defs | 6 | ||||
-rw-r--r-- | nuttx/drivers/wireless/Make.defs | 8 |
19 files changed, 1983 insertions, 63 deletions
diff --git a/nuttx/drivers/Makefile b/nuttx/drivers/Makefile index 26a2ea992..6d3b40b1f 100644 --- a/nuttx/drivers/Makefile +++ b/nuttx/drivers/Makefile @@ -34,6 +34,7 @@ ############################################################################ -include $(TOPDIR)/Make.defs +DELIM ?= $(strip /) ifeq ($(WINTOOL),y) INCDIROPT = -w @@ -48,22 +49,22 @@ VPATH = . # files to the source file list, add its DEPPATH info, and will add # the appropriate paths to the VPATH variable -include analog/Make.defs -include bch/Make.defs -include input/Make.defs -include lcd/Make.defs -include mmcsd/Make.defs -include mtd/Make.defs -include net/Make.defs -include pipes/Make.defs -include power/Make.defs -include sensors/Make.defs -include sercomm/Make.defs -include serial/Make.defs -include syslog/Make.defs -include usbdev/Make.defs -include usbhost/Make.defs -include wireless/Make.defs +include analog$(DELIM)Make.defs +include bch$(DELIM)Make.defs +include input$(DELIM)Make.defs +include lcd$(DELIM)Make.defs +include mmcsd$(DELIM)Make.defs +include mtd$(DELIM)Make.defs +include net$(DELIM)Make.defs +include pipes$(DELIM)Make.defs +include power$(DELIM)Make.defs +include sensors$(DELIM)Make.defs +include sercomm$(DELIM)Make.defs +include serial$(DELIM)Make.defs +include syslog$(DELIM)Make.defs +include usbdev$(DELIM)Make.defs +include usbhost$(DELIM)Make.defs +include wireless$(DELIM)Make.defs ifneq ($(CONFIG_NFILE_DESCRIPTORS),0) CSRCS += dev_null.c dev_zero.c loop.c diff --git a/nuttx/drivers/analog/Make.defs b/nuttx/drivers/analog/Make.defs index d94e39758..89cc5bd3f 100644 --- a/nuttx/drivers/analog/Make.defs +++ b/nuttx/drivers/analog/Make.defs @@ -1,7 +1,7 @@ ############################################################################ # drivers/analog/Make.defs # -# Copyright (C) 2011 Gregory Nutt. All rights reserved. +# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without @@ -76,12 +76,12 @@ endif ifeq ($(CONFIG_DAC),y) DEPPATH += --dep-path analog VPATH += :analog - CFLAGS += ${shell $(TOPDIR)/tools/incdir.sh $(INCDIROPT) "$(CC)" $(TOPDIR)/drivers/analog} + CFLAGS += ${shell $(INCDIR) $(INCDIROPT) "$(CC)" $(TOPDIR)$(DELIM)drivers$(DELIM)analog} else ifeq ($(CONFIG_ADC),y) DEPPATH += --dep-path analog VPATH += :analog - CFLAGS += ${shell $(TOPDIR)/tools/incdir.sh $(INCDIROPT) "$(CC)" $(TOPDIR)/drivers/analog} + CFLAGS += ${shell $(INCDIR) $(INCDIROPT) "$(CC)" $(TOPDIR)$(DELIM)drivers$(DELIM)analog} endif endif diff --git a/nuttx/drivers/bch/Make.defs b/nuttx/drivers/bch/Make.defs index bc22df8e2..78dfbff30 100644 --- a/nuttx/drivers/bch/Make.defs +++ b/nuttx/drivers/bch/Make.defs @@ -1,7 +1,7 @@ ############################################################################ # drivers/bch/Make.defs # -# Copyright (C) 2008, 2011 Gregory Nutt. All rights reserved. +# Copyright (C) 2008, 2011-2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without @@ -46,7 +46,7 @@ CSRCS += bchlib_setup.c bchlib_teardown.c bchlib_read.c bchlib_write.c \ DEPPATH += --dep-path bch VPATH += :bch -CFLAGS += ${shell $(TOPDIR)/tools/incdir.sh $(INCDIROPT) "$(CC)" $(TOPDIR)/drivers/bch} +CFLAGS += ${shell $(INCDIR) $(INCDIROPT) "$(CC)" $(TOPDIR)$(DELIM)drivers$(DELIM)bch} endif endif diff --git a/nuttx/drivers/input/Make.defs b/nuttx/drivers/input/Make.defs index 6dbae268e..10e6db62f 100644 --- a/nuttx/drivers/input/Make.defs +++ b/nuttx/drivers/input/Make.defs @@ -1,7 +1,7 @@ ############################################################################ # drivers/input/Make.defs # -# Copyright (C) 2011 Gregory Nutt. All rights reserved. +# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without @@ -47,6 +47,10 @@ ifeq ($(CONFIG_INPUT_ADS7843E),y) CSRCS += ads7843e.c endif +ifeq ($(CONFIG_INPUT_MAX11802),y) + CSRCS += max11802.c +endif + ifeq ($(CONFIG_INPUT_STMPE811),y) CSRCS += stmpe811_base.c ifneq ($(CONFIG_INPUT_STMPE811_TSC_DISABLE),y) @@ -67,6 +71,6 @@ endif DEPPATH += --dep-path input VPATH += :input -CFLAGS += ${shell $(TOPDIR)/tools/incdir.sh $(INCDIROPT) "$(CC)" $(TOPDIR)/drivers/input} +CFLAGS += ${shell $(INCDIR) $(INCDIROPT) "$(CC)" $(TOPDIR)$(DELIM)drivers$(DELIM)input} endif diff --git a/nuttx/drivers/lcd/Make.defs b/nuttx/drivers/lcd/Make.defs index 26b169391..1b445b6a7 100644 --- a/nuttx/drivers/lcd/Make.defs +++ b/nuttx/drivers/lcd/Make.defs @@ -47,6 +47,10 @@ ifeq ($(CONFIG_LCD_NOKIA6100),y) CSRCS += nokia6100.c endif +ifeq ($(CONFIG_LCD_UG2864AMBAG01),y) + CSRCS += ug-2864ambag01.c +endif + ifeq ($(CONFIG_LCD_UG9664HSWAG01),y) CSRCS += ug-9664hswag01.c endif @@ -63,6 +67,6 @@ endif DEPPATH += --dep-path lcd VPATH += :lcd -CFLAGS += ${shell $(TOPDIR)/tools/incdir.sh $(INCDIROPT) "$(CC)" $(TOPDIR)/drivers/lcd} +CFLAGS += ${shell $(INCDIR) $(INCDIROPT) "$(CC)" $(TOPDIR)$(DELIM)drivers$(DELIM)lcd} endif diff --git a/nuttx/drivers/lcd/ug-2864ambag01.c b/nuttx/drivers/lcd/ug-2864ambag01.c new file mode 100644 index 000000000..2a47b38eb --- /dev/null +++ b/nuttx/drivers/lcd/ug-2864ambag01.c @@ -0,0 +1,1161 @@ +/************************************************************************************** + * drivers/lcd/ug-2864ambag01.c + * Driver for Univision UG-2864AMBAG01 OLED display (wih SH1101A controller) in SPI + * mode + * + * Copyright (C) 2012 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * References: + * 1. Product Specification (Preliminary), Part Name: OEL Display Module, Part ID: + * UG-2864AMBAG01, Doc No: SASI-9015-A, Univision Technology Inc. + * 2. SH1101A, 132 X 64 Dot Matrix OLED/PLED, Preliminary Segment/Common Driver with + * Controller, Sino Wealth + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + **************************************************************************************/ +/************************************************************************************** + * Device memory organization: + * + * +----------------------------+ + * | Column | + * --------+----+---+---+---+-...-+-----+ + * Page | 0 | 1 | 2 | 3 | ... | 131 | + * --------+----+---+---+---+-...-+-----+ + * Page 0 | D0 | X | | | | | + * | D1 | X | | | | | + * | D2 | X | | | | | + * | D3 | X | | | | | + * | D4 | X | | | | | + * | D5 | X | | | | | + * | D6 | X | | | | | + * | D7 | X | | | | | + * --------+----+---+---+---+-...-+-----+ + * Page 1 | | | | | | | + * --------+----+---+---+---+-...-+-----+ + * Page 2 | | | | | | | + * --------+----+---+---+---+-...-+-----+ + * Page 3 | | | | | | | + * --------+----+---+---+---+-...-+-----+ + * Page 4 | | | | | | | + * --------+----+---+---+---+-...-+-----+ + * Page 5 | | | | | | | + * --------+----+---+---+---+-...-+-----+ + * Page 6 | | | | | | | + * --------+----+---+---+---+-...-+-----+ + * Page 7 | | | | | | | + * --------+----+---+---+---+-...-+-----+ + * + * -----------------------------------+--------------------------------------- + * Landscape Display: | Reverse Landscape Display: + * --------+-----------------------+ | --------+---------------------------+ + * | Column | | | Column | + * --------+---+---+---+-...-+-----+ | --------+-----+-----+-----+-...-+---+ + * Page 0 | 0 | 1 | 2 | | 131 | | Page 7 | 131 | 130 | 129 | | 0 | + * --------+---+---+---+-...-+-----+ | --------+-----+-----+-----+-...-+---+ + * Page 1 | V | | Page 6 | ^ | + * --------+---+---+---+-...-+-----+ | --------+-----+-----+-----+-...-+---+ + * Page 2 | V | | Page 5 | ^ | + * --------+---+---+---+-...-+-----+ | --------+-----+-----+-----+-...-+---+ + * Page 3 | V | | Page 4 | ^ | + * --------+---+---+---+-...-+-----+ | --------+-----+-----+-----+-...-+---+ + * Page 4 | V | | Page 3 | ^ | + * --------+---+---+---+-...-+-----+ | --------+-----+-----+-----+-...-+---+ + * Page 5 | V | | Page 2 | ^ | + * --------+---+---+---+-...-+-----+ | --------+-----+-----+-----+-...-+---+ + * Page 6 | V | | Page 1 | ^ | + * --------+---+---+---+-...-+-----+ | --------+-----+-----+-----+-...-+---+ + * Page 7 | V | | Page 0 | ^ | + * --------+---+---+---+-...-+-----+ | --------+-----+-----+-----+-...-+---+ + * -----------------------------------+--------------------------------------- + * + * -----------------------------------+--------------------------------------- + * Portrait Display: | Reverse Portrait Display: + * -----------+---------------------+ | -----------+---------------------+ + * | Page | | | Page | + * -----------+---+---+---+-...-+---+ | -----------+---+---+---+-...-+---+ + * Column 0 | 0 | 1 | 2 | | 7 | | Column 131 | 7 | 6 | 5 | | 0 | + * -----------+---+---+---+-...-+---+ | -----------+---+---+---+-...-+---+ + * Column 1 | > > > > > | | Column 130 | | + * -----------+---+---+---+-...-+---+ | -----------+---+---+---+-...-+---+ + * Column 2 | | | Column 129 | | + * -----------+---+---+---+-...-+---+ | -----------+---+---+---+-...-+---+ + * ... | | | ... | | + * -----------+---+---+---+-...-+---+ | -----------+---+---+---+-...-+---+ + * Column 131 | | | Column 0 | < < < < < | + * -----------+---+---+---+-...-+---+ | -----------+---+---+---+-...-+---+ + * -----------------------------------+---------------------------------------- + **************************************************************************************/ + +/************************************************************************************** + * Included Files + **************************************************************************************/ + +#include <nuttx/config.h> + +#include <sys/types.h> +#include <stdint.h> +#include <stdbool.h> +#include <string.h> +#include <errno.h> +#include <debug.h> + +#include <nuttx/arch.h> +#include <nuttx/spi.h> +#include <nuttx/lcd/lcd.h> +#include <nuttx/lcd/ug-2864ambag01.h> + +#include <arch/irq.h> + +#ifdef CONFIG_LCD_UG2864AMBAG01 + +/************************************************************************************** + * Pre-processor Definitions + **************************************************************************************/ +/* Configuration **********************************************************************/ +/* Limitations of the current configuration that I hope to fix someday */ + +#if CONFIG_UG2864AMBAG01_NINTERFACES != 1 +# warning "This implementation supports only a single OLED device" +# undef CONFIG_UG2864AMBAG01_NINTERFACES +# define CONFIG_UG2864AMBAG01_NINTERFACES 1 +#endif + +#if defined(CONFIG_LCD_PORTRAIT) || defined(CONFIG_LCD_RPORTRAIT) +# warning "No support yet for portrait modes" +# define CONFIG_LCD_LANDSCAPE 1 +# undef CONFIG_LCD_PORTRAIT +# undef CONFIG_LCD_RLANDSCAPE +# undef CONFIG_LCD_RPORTRAIT +#elif defined(CONFIG_LCD_RLANDSCAPE) +# warning "Reverse landscape mode is untested and, hence, probably buggy" +#endif + +/* SH1101A Commands *******************************************************************/ + +#define SH1101A_SETCOLL(ad) (0x00 | ((ad) & 0x0f)) /* Set Lower Column Address: (00h - 0fh) */ +#define SH1101A_SETCOLH(ad) (0x10 | ((ad) & 0x0f)) /* Set Higher Column Address: (10h - 1fh) */ +#define SH1101A_STARTLINE(ln) (0x40 | ((ln) & 0x3f)) /* Set Display Start Line: (40h - 7fh) */ +#define SH1101A_CONTRAST_MODE (0x81) /* Set Contrast Control Register: (Double Bytes Command) */ +# define SH1101A_CONTRAST(c) (c) +#define SH1101A_SEGREMAP(m) (0xa0 | ((m) & 0x01)) /* Set Segment Re-map: (a0h - a1h) */ +# define SH1101A_REMAPRIGHT SH1101A_SEGREMAP(0) /* Right rotation */ +# define SH1101A_REMAPPLEFT SH1101A_SEGREMAP(1) /* Left rotation */ +#define SH1101A_EDISPOFFON(s) (0xa4 | ((s) & 0x01)) /* Set Entire Display OFF/ON: (a4h - a5h) */ +# define SH1101A_EDISPOFF SH1101A_EDISPOFFON(0) /* Display off */ +# define SH1101A_EDISPON SH1101A_EDISPOFFON(1) /* Display on */ +#define SH1101A_NORMREV(s) (0xa6 | ((s) & 0x01)) /* Set Normal/Reverse Display: (a6h -a7h) */ +# define SH1101A_NORMAL SH1101A_NORMREV(0) /* Normal display */ +# define SH1101A_REVERSE SH1101A_NORMREV(1) /* Reverse display */ +#define SH1101A_MRATIO_MODE (0xa8) /* Set Multiplex Ration: (Double Bytes Command) */ +# define SH1101A_MRATIO(d) ((d) & 0x3f) +#define SH1101A_DCDC_MODE (0xad) /* Set DC-DC OFF/ON: (Double Bytes Command) */ +# define SH1101A_DCDC_OFF (0x8a) + # define SH1101A_DCDC_ON (0x8b) +#define SH1101A_DISPOFFON(s) (0xae | ((s) & 0x01)) /* Display OFF/ON: (aeh - afh) */ +# define SH1101A_DISPOFF SH1101A_DISPOFFON(0) /* Display off */ +# define SH1101A_DISPON SH1101A_DISPOFFON(1) /* Display on */ +#define SH1101A_PAGEADDR(a) (0xb0 | ((a) & 0x0f)) /* Set Page Address: (b0h - b7h) */ +#define SH1101A_SCANDIR(d) (0xc0 | ((d) & 0x08)) /* Set Common Output Scan Direction: (c0h - c8h) */ +# define SH1101A_SCANFROMCOM0 SH1101A_SCANDIR(0x00) /* Scan from COM[0] to COM[n-1]*/ +# define SH1101A_SCANTOCOM0 SH1101A_SCANDIR(0x08) /* Scan from COM[n-1] to COM[0] */ +#define SH1101A_DISPOFFS_MODE (0xd3) /* Set Display Offset: (Double Bytes Command) */ +# define SH1101A_DISPOFFS(o) ((o) & 0x3f) +#define SH1101A_CLKDIV_SET (0xd5) /* Set Display Clock Divide Ratio/Oscillator Frequency: (Double Bytes Command) */ +# define SH1101A_CLKDIV(f,d) ((((f) & 0x0f) << 4) | ((d) & 0x0f)) +#define SH1101A_CHRGPER_SET (0xd9) /* Set Dis-charge/Pre-charge Period: (Double Bytes Command) */ +# define SH1101A_CHRGPER(d,p) ((((d) & 0x0f) << 4) | ((p) & 0x0f)) +#define SH1101A_CMNPAD_CONFIG (0xda) /* Set Common pads hardware configuration: (Double Bytes Command) */ + #define SH1101A_CMNPAD(c) ((0x02) | ((c) & 0x10)) +#define SH1101A_VCOM_SET (0xdb) /* Set VCOM Deselect Level: (Double Bytes Command) */ +# define SH1101A_VCOM(v) (v) +#define SH1101A_RMWSTART (0xe0) /* Read-Modify-Write: (e0h) */ +#define SH1101A_NOP (0xe3) /* NOP: (e3h) */ +#define SH1101A_END (0xee) /* End: (eeh) */ + +#define SH1101A_WRDATA(d) (d) /* Write Display Data */ +#define SH1101A_STATUS_BUSY (0x80) /* Read Status */ +#define SH1101A_STATUS_ONOFF (0x40) +#define SH1101A_RDDATA(d) (d) /* Read Display Data */ + +/* Color Properties *******************************************************************/ +/* Display Resolution + * + * The SH1101A display controller can handle a resolution of 132x64. The UG-2864AMBAG01 + * on the base board is 128x64. + */ + +#define UG2864AMBAG01_DEV_XRES 128 /* Only 128 of 131 columns used */ +#define UG2864AMBAG01_DEV_YRES 64 /* 8 pages each 8 rows */ +#define UG2864AMBAG01_DEV_XOFFSET 2 /* Offset to logical column 0 */ +#define UG2864AMBAG01_DEV_PAGES 8 /* 8 pages */ + +#if defined(CONFIG_LCD_LANDSCAPE) || defined(CONFIG_LCD_RLANDSCAPE) +# define UG2864AMBAG01_XRES UG2864AMBAG01_DEV_XRES +# define UG2864AMBAG01_YRES UG2864AMBAG01_DEV_YRES +#else +# define UG2864AMBAG01_XRES UG2864AMBAG01_DEV_YRES +# define UG2864AMBAG01_YRES UG2864AMBAG01_DEV_XRES +#endif + +/* Color depth and format */ + +#define UG2864AMBAG01_BPP 1 +#define UG2864AMBAG01_COLORFMT FB_FMT_Y1 + +/* Bytes per logical row and actual device row */ + +#define UG2864AMBAG01_XSTRIDE (UG2864AMBAG01_XRES >> 3) +#define UG2864AMBAG01_YSTRIDE (UG2864AMBAG01_YRES >> 3) + +/* Default contrast */ + +#define UG2864AMBAG01_CONTRAST (128) + +/* The size of the shadow frame buffer or one row buffer. + * + * Frame buffer size: 128 columns x 64 rows / 8 bits-per-pixel + * Row size: 128 columns x 8 rows-per-page / 8 bits-per-pixel + */ + +#define UG2864AMBAG01_FBSIZE (UG2864AMBAG01_XSTRIDE * UG2864AMBAG01_YRES) +#define UG2864AMBAG01_ROWSIZE (UG2864AMBAG01_XSTRIDE) + +/* Bit helpers */ + +#define LS_BIT (1 << 0) +#define MS_BIT (1 << 7) + +/* Debug ******************************************************************************/ + +#ifdef CONFIG_DEBUG_LCD +# define lcddbg(format, arg...) dbg(format, ##arg) +# define lcdvdbg(format, arg...) vdbg(format, ##arg) +#else +# define lcddbg(x...) +# define lcdvdbg(x...) +#endif + +/************************************************************************************** + * Private Type Definition + **************************************************************************************/ + +/* This structure describes the state of this driver */ + +struct ug2864ambag01_dev_s +{ + struct lcd_dev_s dev; /* Publically visible device structure */ + + /* Private LCD-specific information follows */ + + FAR struct spi_dev_s *spi; /* Cached SPI device reference */ + uint8_t contrast; /* Current contrast setting */ + bool on; /* true: display is on */ + + + /* The SH1101A does not support reading from the display memory in SPI mode. + * Since there is 1 BPP and access is byte-by-byte, it is necessary to keep + * a shadow copy of the framebuffer memory. At 128x64, this amounts to 1KB. + */ + + uint8_t fb[UG2864AMBAG01_FBSIZE]; +}; + +/************************************************************************************** + * Private Function Protototypes + **************************************************************************************/ + +/* Low-level SPI helpers */ + +#ifdef CONFIG_SPI_OWNBUS +static inline void ug2864ambag01_configspi(FAR struct spi_dev_s *spi); +# define ug2864ambag01_lock(spi) +# define ug2864ambag01_unlock(spi) +#else +# define ug2864ambag01_configspi(spi) +static void ug2864ambag01_lock(FAR struct spi_dev_s *spi); +static void ug2864ambag01_unlock(FAR struct spi_dev_s *spi); +#endif + +/* LCD Data Transfer Methods */ + +static int ug2864ambag01_putrun(fb_coord_t row, fb_coord_t col, + FAR const uint8_t *buffer, size_t npixels); +static int ug2864ambag01_getrun(fb_coord_t row, fb_coord_t col, FAR uint8_t *buffer, + size_t npixels); + +/* LCD Configuration */ + +static int ug2864ambag01_getvideoinfo(FAR struct lcd_dev_s *dev, + FAR struct fb_videoinfo_s *vinfo); +static int ug2864ambag01_getplaneinfo(FAR struct lcd_dev_s *dev, unsigned int planeno, + FAR struct lcd_planeinfo_s *pinfo); + +/* LCD RGB Mapping */ + +#ifdef CONFIG_FB_CMAP +# error "RGB color mapping not supported by this driver" +#endif + +/* Cursor Controls */ + +#ifdef CONFIG_FB_HWCURSOR +# error "Cursor control not supported by this driver" +#endif + +/* LCD Specific Controls */ + +static int ug2864ambag01_getpower(struct lcd_dev_s *dev); +static int ug2864ambag01_setpower(struct lcd_dev_s *dev, int power); +static int ug2864ambag01_getcontrast(struct lcd_dev_s *dev); +static int ug2864ambag01_setcontrast(struct lcd_dev_s *dev, unsigned int contrast); + +/************************************************************************************** + * Private Data + **************************************************************************************/ + +/* This is working memory allocated by the LCD driver for each LCD device + * and for each color plane. This memory will hold one raster line of data. + * The size of the allocated run buffer must therefore be at least + * (bpp * xres / 8). Actual alignment of the buffer must conform to the + * bitwidth of the underlying pixel type. + * + * If there are multiple planes, they may share the same working buffer + * because different planes will not be operate on concurrently. However, + * if there are multiple LCD devices, they must each have unique run buffers. + */ + +static uint8_t g_runbuffer[UG2864AMBAG01_ROWSIZE]; + +/* This structure describes the overall LCD video controller */ + +static const struct fb_videoinfo_s g_videoinfo = +{ + .fmt = UG2864AMBAG01_COLORFMT, /* Color format: RGB16-565: RRRR RGGG GGGB BBBB */ + .xres = UG2864AMBAG01_XRES, /* Horizontal resolution in pixel columns */ + .yres = UG2864AMBAG01_YRES, /* Vertical resolution in pixel rows */ + .nplanes = 1, /* Number of color planes supported */ +}; + +/* This is the standard, NuttX Plane information object */ + +static const struct lcd_planeinfo_s g_planeinfo = +{ + .putrun = ug2864ambag01_putrun, /* Put a run into LCD memory */ + .getrun = ug2864ambag01_getrun, /* Get a run from LCD memory */ + .buffer = (uint8_t*)g_runbuffer, /* Run scratch buffer */ + .bpp = UG2864AMBAG01_BPP, /* Bits-per-pixel */ +}; + +/* This is the OLED driver instance (only a single device is supported for now) */ + +static struct ug2864ambag01_dev_s g_oleddev = +{ + .dev = + { + /* LCD Configuration */ + + .getvideoinfo = ug2864ambag01_getvideoinfo, + .getplaneinfo = ug2864ambag01_getplaneinfo, + + /* LCD RGB Mapping -- Not supported */ + /* Cursor Controls -- Not supported */ + + /* LCD Specific Controls */ + + .getpower = ug2864ambag01_getpower, + .setpower = ug2864ambag01_setpower, + .getcontrast = ug2864ambag01_getcontrast, + .setcontrast = ug2864ambag01_setcontrast, + }, +}; + +/************************************************************************************** + * Private Functions + **************************************************************************************/ + +/************************************************************************************** + * Name: ug2864ambag01_configspi + * + * Description: + * Configure the SPI for use with the UG-2864AMBAG01 + * + * Input Parameters: + * spi - Reference to the SPI driver structure + * + * Returned Value: + * None + * + * Assumptions: + * + **************************************************************************************/ + +#ifdef CONFIG_SPI_OWNBUS +static inline void ug2864ambag01_configspi(FAR struct spi_dev_s *spi) +{ + lcdvdbg("Mode: %d Bits: 8 Frequency: %d\n", + CONFIG_UG2864AMBAG01_SPIMODE, CONFIG_UG2864AMBAG01_FREQUENCY); + + /* Configure SPI for the UG-2864AMBAG01. But only if we own the SPI bus. Otherwise, + * don't bother because it might change. + */ + + SPI_SETMODE(spi, CONFIG_UG2864AMBAG01_SPIMODE); + SPI_SETBITS(spi, 8); + SPI_SETFREQUENCY(spi, CONFIG_UG2864AMBAG01_FREQUENCY) +} +#endif + +/************************************************************************************** + * Name: ug2864ambag01_lock + * + * Description: + * Select the SPI, locking and re-configuring if necessary + * + * Input Parameters: + * spi - Reference to the SPI driver structure + * + * Returned Value: + * None + * + * Assumptions: + * + **************************************************************************************/ + +#ifndef CONFIG_SPI_OWNBUS +static inline void ug2864ambag01_lock(FAR struct spi_dev_s *spi) +{ + /* Lock the SPI bus if there are multiple devices competing for the SPI bus. */ + + SPI_LOCK(spi, true); + + /* Now make sure that the SPI bus is configured for the UG-2864AMBAG01 (it + * might have gotten configured for a different device while unlocked) + */ + + SPI_SETMODE(spi, CONFIG_UG2864AMBAG01_SPIMODE); + SPI_SETBITS(spi, 8); + SPI_SETFREQUENCY(spi, CONFIG_UG2864AMBAG01_FREQUENCY); +} +#endif + +/************************************************************************************** + * Name: ug2864ambag01_unlock + * + * Description: + * De-select the SPI + * + * Input Parameters: + * spi - Reference to the SPI driver structure + * + * Returned Value: + * None + * + * Assumptions: + * + **************************************************************************************/ + +#ifndef CONFIG_SPI_OWNBUS +static inline void ug2864ambag01_unlock(FAR struct spi_dev_s *spi) +{ + /* De-select UG-2864AMBAG01 chip and relinquish the SPI bus. */ + + SPI_LOCK(spi, false); +} +#endif + +/************************************************************************************** + * Name: ug2864ambag01_putrun + * + * Description: + * This method can be used to write a partial raster line to the LCD. + * + * Input Parameters: + * row - Starting row to write to (range: 0 <= row < yres) + * col - Starting column to write to (range: 0 <= col <= xres-npixels) + * buffer - The buffer containing the run to be written to the LCD + * npixels - The number of pixels to write to the LCD + * (range: 0 < npixels <= xres-col) + * + **************************************************************************************/ + +#if defined(CONFIG_LCD_LANDSCAPE) || defined(CONFIG_LCD_RLANDSCAPE) +static int ug2864ambag01_putrun(fb_coord_t row, fb_coord_t col, FAR const uint8_t *buffer, + size_t npixels) +{ + /* Because of this line of code, we will only be able to support a single UG device */ + + FAR struct ug2864ambag01_dev_s *priv = (FAR struct ug2864ambag01_dev_s *)&g_oleddev; + FAR uint8_t *fbptr; + FAR uint8_t *ptr; + uint8_t devcol; + uint8_t fbmask; + uint8_t page; + uint8_t usrmask; + int pixlen; + uint8_t i; + + lcdvdbg("row: %d col: %d npixels: %d\n", row, col, npixels); + DEBUGASSERT(buffer); + + /* Clip the run to the display */ + + pixlen = npixels; + if ((unsigned int)col + (unsigned int)pixlen > (unsigned int)UG2864AMBAG01_XRES) + { + pixlen = (int)UG2864AMBAG01_XRES - (int)col; + } + + /* Verify that some portion of the run remains on the display */ + + if (pixlen <= 0 || row > UG2864AMBAG01_YRES) + { + return OK; + } + + /* Perform coordinate conversion for reverse landscape mode */ + +#ifdef CONFIG_LCD_RLANDSCAPE + row = (UG2864AMBAG01_YRES-1) - row; + col = (UG2864AMBAG01_XRES-1) - col; +#endif + + /* Get the page number. The range of 64 lines is divided up into eight + * pages of 8 lines each. + */ + + page = row >> 3; + + /* Update the shadow frame buffer memory. First determine the pixel + * position in the frame buffer memory. Pixels are organized like + * this: + * + * --------+---+---+---+---+-...-+-----+ + * Segment | 0 | 1 | 2 | 3 | ... | 131 | + * --------+---+---+---+---+-...-+-----+ + * D0 | | X | | | | | + * D1 | | X | | | | | + * D2 | | X | | | | | + * D3 | | X | | | | | + * D4 | | X | | | | | + * D5 | | X | | | | | + * D6 | | X | | | | | + * D7 | | X | | | | | + * --------+---+---+---+---+-...-+-----+ + * + * So, in order to draw a white, horizontal line, at row 45. we + * would have to modify all of the bytes in page 45/8 = 5. We + * would have to set bit 45%8 = 5 in every byte in the page. + */ + + fbmask = 1 << (row & 7); + fbptr = &priv->fb[page * UG2864AMBAG01_XRES + col]; +#ifdef CONFIG_LCD_RLANDSCAPE + ptr = fbptr + pixlen - 1; +#else + ptr = fbptr; +#endif +#ifdef CONFIG_NX_PACKEDMSFIRST + usrmask = MS_BIT; +#else + usrmask = LS_BIT; +#endif + + for (i = 0; i < pixlen; i++) + { + /* Set or clear the corresponding bit */ + +#ifdef CONFIG_LCD_RLANDSCAPE + if ((*buffer & usrmask) != 0) + { + *ptr-- |= fbmask; + } + else + { + *ptr-- &= ~fbmask; + } +#else + if ((*buffer & usrmask) != 0) + { + *ptr++ |= fbmask; + } + else + { + *ptr++ &= ~fbmask; + } +#endif + + /* Inc/Decrement to the next source pixel */ + +#ifdef CONFIG_NX_PACKEDMSFIRST + if (usrmask == LS_BIT) + { + buffer++; + usrmask = MS_BIT; + } + else + { + usrmask >>= 1; + } +#else + if (usrmask == MS_BIT) + { + buffer++; + usrmask = LS_BIT; + } + else + { + usrmask <<= 1; + } +#endif + } + + /* Offset the column position to account for smaller horizontal + * display range. + */ + + devcol = col + UG2864AMBAG01_DEV_XOFFSET; + + /* Lock and select device */ + + ug2864ambag01_lock(priv->spi); + SPI_SELECT(priv->spi, SPIDEV_DISPLAY, true); + + /* Select command transfer */ + + SPI_CMDDATA(priv->spi, SPIDEV_DISPLAY, true); + + /* Set the starting position for the run */ + /* Set the column address to the XOFFSET value */ + + SPI_SEND(priv->spi, SH1101A_SETCOLL(devcol & 0x0f)); + SPI_SEND(priv->spi, SH1101A_SETCOLH(devcol >> 4)); + + /* Set the page address */ + + SPI_SEND(priv->spi, SH1101A_PAGEADDR(page)); + + /* Select data transfer */ + + SPI_CMDDATA(priv->spi, SPIDEV_DISPLAY, false); + + /* Then transfer all of the data */ + + (void)SPI_SNDBLOCK(priv->spi, fbptr, pixlen); + + /* De-select and unlock the device */ + + SPI_SELECT(priv->spi, SPIDEV_DISPLAY, false); + ug2864ambag01_unlock(priv->spi); + return OK; +} +#else +# error "Configuration not implemented" +#endif + +/************************************************************************************** + * Name: ug2864ambag01_getrun + * + * Description: + * This method can be used to read a partial raster line from the LCD: + * + * Description: + * This method can be used to write a partial raster line to the LCD. + * + * row - Starting row to read from (range: 0 <= row < yres) + * col - Starting column to read read (range: 0 <= col <= xres-npixels) + * buffer - The buffer in which to return the run read from the LCD + * npixels - The number of pixels to read from the LCD + * (range: 0 < npixels <= xres-col) + * + **************************************************************************************/ + +#if defined(CONFIG_LCD_LANDSCAPE) || defined(CONFIG_LCD_RLANDSCAPE) +static int ug2864ambag01_getrun(fb_coord_t row, fb_coord_t col, FAR uint8_t *buffer, + size_t npixels) +{ + /* Because of this line of code, we will only be able to support a single UG device */ + + FAR struct ug2864ambag01_dev_s *priv = &g_oleddev; + FAR uint8_t *fbptr; + uint8_t page; + uint8_t fbmask; + uint8_t usrmask; + int pixlen; + uint8_t i; + + lcdvdbg("row: %d col: %d npixels: %d\n", row, col, npixels); + DEBUGASSERT(buffer); + + /* Clip the run to the display */ + + pixlen = npixels; + if ((unsigned int)col + (unsigned int)pixlen > (unsigned int)UG2864AMBAG01_XRES) + { + pixlen = (int)UG2864AMBAG01_XRES - (int)col; + } + + /* Verify that some portion of the run is actually the display */ + + if (pixlen <= 0 || row > UG2864AMBAG01_YRES) + { + return -EINVAL; + } + + /* Perform coordinate conversion for reverse landscape mode */ + +#ifdef CONFIG_LCD_RLANDSCAPE + row = (UG2864AMBAG01_YRES-1) - row; + col = (UG2864AMBAG01_XRES-1) - col; +#endif + + /* Then transfer the display data from the shadow frame buffer memory */ + /* Get the page number. The range of 64 lines is divided up into eight + * pages of 8 lines each. + */ + + page = row >> 3; + + /* Update the shadow frame buffer memory. First determine the pixel + * position in the frame buffer memory. Pixels are organized like + * this: + * + * --------+---+---+---+---+-...-+-----+ + * Segment | 0 | 1 | 2 | 3 | ... | 131 | + * --------+---+---+---+---+-...-+-----+ + * D0 | | X | | | | | + * D1 | | X | | | | | + * D2 | | X | | | | | + * D3 | | X | | | | | + * D4 | | X | | | | | + * D5 | | X | | | | | + * D6 | | X | | | | | + * D7 | | X | | | | | + * --------+---+---+---+---+-...-+-----+ + * + * So, in order to draw a white, horizontal line, at row 45. we + * would have to modify all of the bytes in page 45/8 = 5. We + * would have to set bit 45%8 = 5 in every byte in the page. + */ + + fbmask = 1 << (row & 7); +#ifdef CONFIG_LCD_RLANDSCAPE + fbptr = &priv->fb[page * (UG2864AMBAG01_XRES-1) + col + pixlen]; +#else + fbptr = &priv->fb[page * UG2864AMBAG01_XRES + col]; +#endif +#ifdef CONFIG_NX_PACKEDMSFIRST + usrmask = MS_BIT; +#else + usrmask = LS_BIT; +#endif + + *buffer = 0; + for (i = 0; i < pixlen; i++) + { + /* Set or clear the corresponding bit */ + +#ifdef CONFIG_LCD_RLANDSCAPE + uint8_t byte = *fbptr--; +#else + uint8_t byte = *fbptr++; +#endif + if ((byte & fbmask) != 0) + { + *buffer |= usrmask; + } + + /* Inc/Decrement to the next destination pixel. Hmmmm. It looks like + * this logic could write past the end of the user buffer. Revisit + * this! + */ + +#ifdef CONFIG_NX_PACKEDMSFIRST + if (usrmask == LS_BIT) + { + buffer++; + *buffer = 0; + usrmask = MS_BIT; + } + else + { + usrmask >>= 1; + } +#else + if (usrmask == MS_BIT) + { + buffer++; + *buffer = 0; + usrmask = LS_BIT; + } + else + { + usrmask <<= 1; + } +#endif + } + + return OK; +} +#else +# error "Configuration not implemented" +#endif + +/************************************************************************************** + * Name: ug2864ambag01_getvideoinfo + * + * Description: + * Get information about the LCD video controller configuration. + * + **************************************************************************************/ + +static int ug2864ambag01_getvideoinfo(FAR struct lcd_dev_s *dev, + FAR struct fb_videoinfo_s *vinfo) +{ + DEBUGASSERT(dev && vinfo); + lcdvdbg("fmt: %d xres: %d yres: %d nplanes: %d\n", + g_videoinfo.fmt, g_videoinfo.xres, g_videoinfo.yres, g_videoinfo.nplanes); + memcpy(vinfo, &g_videoinfo, sizeof(struct fb_videoinfo_s)); + return OK; +} + +/************************************************************************************** + * Name: ug2864ambag01_getplaneinfo + * + * Description: + * Get information about the configuration of each LCD color plane. + * + **************************************************************************************/ + +static int ug2864ambag01_getplaneinfo(FAR struct lcd_dev_s *dev, unsigned int planeno, + FAR struct lcd_planeinfo_s *pinfo) +{ + DEBUGASSERT(pinfo && planeno == 0); + lcdvdbg("planeno: %d bpp: %d\n", planeno, g_planeinfo.bpp); + memcpy(pinfo, &g_planeinfo, sizeof(struct lcd_planeinfo_s)); + return OK; +} + +/************************************************************************************** + * Name: ug2864ambag01_getpower + * + * Description: + * Get the LCD panel power status (0: full off - CONFIG_LCD_MAXPOWER: full on. On + * backlit LCDs, this setting may correspond to the backlight setting. + * + **************************************************************************************/ + +static int ug2864ambag01_getpower(FAR struct lcd_dev_s *dev) +{ + FAR struct ug2864ambag01_dev_s *priv = (FAR struct ug2864ambag01_dev_s *)dev; + DEBUGASSERT(priv); + + lcdvdbg("power: %s\n", priv->on ? "ON" : "OFF"); + return priv->on ? CONFIG_LCD_MAXPOWER : 0; +} + +/************************************************************************************** + * Name: ug2864ambag01_setpower + * + * Description: + * Enable/disable LCD panel power (0: full off - CONFIG_LCD_MAXPOWER: full on). On + * backlit LCDs, this setting may correspond to the backlight setting. + * + **************************************************************************************/ + +static int ug2864ambag01_setpower(struct lcd_dev_s *dev, int power) +{ + struct ug2864ambag01_dev_s *priv = (struct ug2864ambag01_dev_s *)dev; + DEBUGASSERT(priv && (unsigned)power <= CONFIG_LCD_MAXPOWER && priv->spi); + + lcdvdbg("power: %d [%d]\n", power, priv->on ? CONFIG_LCD_MAXPOWER : 0); + + /* Lock and select device */ + + ug2864ambag01_lock(priv->spi); + SPI_SELECT(priv->spi, SPIDEV_DISPLAY, true); + + if (power <= 0) + { + /* Turn the display off */ + + (void)SPI_SEND(priv->spi, SH1101A_DISPOFF); + priv->on = false; + } + else + { + /* Turn the display on */ + + (void)SPI_SEND(priv->spi, SH1101A_DISPON); /* Display on, dim mode */ + priv->on = true; + } + + /* De-select and unlock the device */ + + SPI_SELECT(priv->spi, SPIDEV_DISPLAY, false); + ug2864ambag01_unlock(priv->spi); + return OK; +} + +/************************************************************************************** + * Name: ug2864ambag01_getcontrast + * + * Description: + * Get the current contrast setting (0-CONFIG_LCD_MAXCONTRAST). + * + **************************************************************************************/ + +static int ug2864ambag01_getcontrast(struct lcd_dev_s *dev) +{ + struct ug2864ambag01_dev_s *priv = (struct ug2864ambag01_dev_s *)dev; + DEBUGASSERT(priv); + + lcdvdbg("contrast: %d\n", priv->contrast); + return priv->contrast; +} + +/************************************************************************************** + * Name: ug2864ambag01_setcontrast + * + * Description: + * Set LCD panel contrast (0-CONFIG_LCD_MAXCONTRAST). + * + **************************************************************************************/ + +static int ug2864ambag01_setcontrast(struct lcd_dev_s *dev, unsigned int contrast) +{ + struct ug2864ambag01_dev_s *priv = (struct ug2864ambag01_dev_s *)dev; + unsigned int scaled; + + lcdvdbg("contrast: %d\n", contrast); + DEBUGASSERT(priv); + + /* Verify the contrast value */ + +#ifdef CONFIG_DEBUG + if (contrast > CONFIG_LCD_MAXCONTRAST) + { + return -EINVAL; + } +#endif + + /* Scale contrast: newcontrast = 255 * contrast / CONFIG_LCD_MAXCONTRAST + * Where contrast is in the range {1,255} + */ + +#if CONFIG_LCD_MAXCONTRAST != 255 + scaled = ((contrast << 8) - 1) / CONFIG_LCD_MAXCONTRAST; +#else + scaled = contrast; +#endif + + /* Lock and select device */ + + ug2864ambag01_lock(priv->spi); + SPI_SELECT(priv->spi, SPIDEV_DISPLAY, true); + + /* Select command transfer */ + + SPI_CMDDATA(priv->spi, SPIDEV_DISPLAY, true); + + /* Set the contrast */ + + (void)SPI_SEND(priv->spi, SH1101A_CONTRAST_MODE); /* Set contrast control register */ + (void)SPI_SEND(priv->spi, SH1101A_CONTRAST(scaled)); /* Data 1: Set 1 of 256 contrast steps */ + priv->contrast = contrast; + + /* De-select and unlock the device */ + + SPI_SELECT(priv->spi, SPIDEV_DISPLAY, false); + ug2864ambag01_unlock(priv->spi); + return OK; +} + +/************************************************************************************** + * Public Functions + **************************************************************************************/ + +/************************************************************************************** + * Name: ug2864ambag01_initialize + * + * Description: + * Initialize the UG-2864AMBAG01 video hardware. The initial state of the + * OLED is fully initialized, display memory cleared, and the OLED ready + * to use, but with the power setting at 0 (full off == sleep mode). + * + * Input Parameters: + * + * spi - A reference to the SPI driver instance. + * devno - A value in the range of 0 through CONFIG_UG2864AMBAG01_NINTERFACES-1. + * This allows support for multiple OLED devices. + * + * Returned Value: + * + * On success, this function returns a reference to the LCD object for + * the specified OLED. NULL is returned on any failure. + * + **************************************************************************************/ + +FAR struct lcd_dev_s *ug2864ambag01_initialize(FAR struct spi_dev_s *spi, unsigned int devno) +{ + FAR struct ug2864ambag01_dev_s *priv = &g_oleddev; + + lcdvdbg("Initializing\n"); + DEBUGASSERT(spi && devno == 0); + + /* Save the reference to the SPI device */ + + priv->spi = spi; + + /* Configure the SPI */ + + ug2864ambag01_configspi(spi) + + /* Lock and select device */ + + ug2864ambag01_lock(priv->spi); + SPI_SELECT(spi, SPIDEV_DISPLAY, true); + + /* Select command transfer */ + + SPI_CMDDATA(spi, SPIDEV_DISPLAY, true); + + /* Configure the device */ + + SPI_SEND(spi, SH1101A_DISPOFF); /* Display off */ + SPI_SEND(spi, SH1101A_SETCOLL(0)); /* Set lower column address */ + SPI_SEND(spi, SH1101A_SETCOLH(0)); /* Set higher column address */ + SPI_SEND(spi, SH1101A_STARTLINE(0)); /* Set display start line */ + SPI_SEND(spi, SH1101A_PAGEADDR(0)); /* Set page address */ + SPI_SEND(spi, SH1101A_CONTRAST_MODE); /* Contrast control */ + SPI_SEND(spi ,UG2864AMBAG01_CONTRAST); /* Default contrast */ + SPI_SEND(spi, SH1101A_REMAPPLEFT); /* Set segment remap left */ + SPI_SEND(spi, SH1101A_EDISPOFF); /* Normal display */ + SPI_SEND(spi, SH1101A_NORMAL); /* Normal (un-reversed) display mode */ + SPI_SEND(spi, SH1101A_MRATIO_MODE); /* Multiplex ratio */ + SPI_SEND(spi, SH1101A_MRATIO(0x3f)); /* Duty = 1/64 */ + SPI_SEND(spi, SH1101A_SCANTOCOM0); /* Com scan direction: Scan from COM[n-1] to COM[0] */ + SPI_SEND(spi, SH1101A_DISPOFFS_MODE); /* Set display offset */ + SPI_SEND(spi, SH1101A_DISPOFFS(0)); + SPI_SEND(spi, SH1101A_CLKDIV_SET); /* Set clock divider */ + SPI_SEND(spi, SH1101A_CLKDIV(0,0)); + SPI_SEND(spi, SH1101A_CMNPAD_CONFIG); /* Set common pads */ + SPI_SEND(spi, SH1101A_CMNPAD(0x10)); + SPI_SEND(spi, SH1101A_VCOM_SET); + SPI_SEND(spi, SH1101A_VCOM(0x40)); + SPI_SEND(spi, SH1101A_DCDC_MODE); /* DC/DC control mode: on */ + SPI_SEND(spi, SH1101A_DCDC_ON); + SPI_SEND(spi, SH1101A_DISPON); /* display ON */ + + /* De-select and unlock the device */ + + SPI_SELECT(spi, SPIDEV_DISPLAY, false); + ug2864ambag01_unlock(priv->spi); + + /* Clear the display */ + + up_mdelay(100); + ug2864ambag01_fill(&priv->dev, UG_Y1_BLACK); + return &priv->dev; +} + +/************************************************************************************** + * Name: ug2864ambag01_fill + * + * Description: + * This non-standard method can be used to clear the entire display by writing one + * color to the display. This is much faster than writing a series of runs. + * + * Input Parameters: + * priv - Reference to private driver structure + * + * Assumptions: + * Caller has selected the OLED section. + * + **************************************************************************************/ + +void ug2864ambag01_fill(FAR struct lcd_dev_s *dev, uint8_t color) +{ + FAR struct ug2864ambag01_dev_s *priv = &g_oleddev; + unsigned int page; + + /* Make an 8-bit version of the selected color */ + + if (color & 1) + { + color = 0xff; + } + else + { + color = 0; + } + + /* Initialize the framebuffer */ + + memset(priv->fb, color, UG2864AMBAG01_FBSIZE); + + /* Lock and select device */ + + ug2864ambag01_lock(priv->spi); + SPI_SELECT(priv->spi, SPIDEV_DISPLAY, true); + + /* Visit each page */ + + for (page = 0; page < UG2864AMBAG01_DEV_PAGES; page++) + { + /* Select command transfer */ + + SPI_CMDDATA(priv->spi, SPIDEV_DISPLAY, true); + + /* Set the column address to the XOFFSET value */ + + SPI_SEND(priv->spi, SH1101A_SETCOLL(UG2864AMBAG01_DEV_XOFFSET)); + SPI_SEND(priv->spi, SH1101A_SETCOLH(0)); + + /* Set the page address */ + + SPI_SEND(priv->spi, SH1101A_PAGEADDR(page)); + + /* Select data transfer */ + + SPI_CMDDATA(priv->spi, SPIDEV_DISPLAY, false); + + /* Transfer one page of the selected color */ + + (void)SPI_SNDBLOCK(priv->spi, &priv->fb[page * UG2864AMBAG01_XRES], + UG2864AMBAG01_XRES); + } + + /* De-select and unlock the device */ + + SPI_SELECT(priv->spi, SPIDEV_DISPLAY, false); + ug2864ambag01_unlock(priv->spi); +} + +#endif /* CONFIG_LCD_UG2864AMBAG01 */ diff --git a/nuttx/drivers/loop.c b/nuttx/drivers/loop.c index df96da59f..b5b5d82d8 100644 --- a/nuttx/drivers/loop.c +++ b/nuttx/drivers/loop.c @@ -215,7 +215,7 @@ static ssize_t loop_read(FAR struct inode *inode, unsigned char *buffer, size_t start_sector, unsigned int nsectors) { FAR struct loop_struct_s *dev; - size_t nbytesread; + ssize_t nbytesread; off_t offset; int ret; diff --git a/nuttx/drivers/mmcsd/Make.defs b/nuttx/drivers/mmcsd/Make.defs index 850456597..06e689c75 100644 --- a/nuttx/drivers/mmcsd/Make.defs +++ b/nuttx/drivers/mmcsd/Make.defs @@ -1,7 +1,7 @@ ############################################################################ # drivers/mmcsd/Make.defs # -# Copyright (C) 2008, 2011 Gregory Nutt. All rights reserved. +# Copyright (C) 2008, 2011-2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without @@ -33,14 +33,24 @@ # ############################################################################ +ifeq ($(CONFIG_MMCSD),y) + # Include MMC/SD drivers -CSRCS += mmcsd_sdio.c mmcsd_spi.c mmcsd_debug.c +ifeq ($(CONFIG_MMCSD_SDIO),y) +CSRCS += mmcsd_sdio.c +endif + +ifeq ($(CONFIG_MMCSD_SPI),y) +CSRCS += mmcsd_spi.c mmcsd_debug.c +endif # Include MMC/SD driver build support DEPPATH += --dep-path mmcsd VPATH += :mmcsd -CFLAGS += ${shell $(TOPDIR)/tools/incdir.sh $(INCDIROPT) "$(CC)" $(TOPDIR)/drivers/mmcsd} +CFLAGS += ${shell $(INCDIR) $(INCDIROPT) "$(CC)" $(TOPDIR)$(DELIM)drivers$(DELIM)mmcsd} + +endif diff --git a/nuttx/drivers/mmcsd/mmcsd_sdio.c b/nuttx/drivers/mmcsd/mmcsd_sdio.c index d0bc6659c..b17ae077d 100644 --- a/nuttx/drivers/mmcsd/mmcsd_sdio.c +++ b/nuttx/drivers/mmcsd/mmcsd_sdio.c @@ -2597,7 +2597,8 @@ static int mmcsd_cardidentify(FAR struct mmcsd_state_s *priv) * operating condition. CMD 8 is reserved on SD version 1.0 and MMC. * * CMD8 Argument: - * [31:12]: Reserved (shall be set to '0')
* [11:8]: Supply Voltage (VHS) 0x1 (Range: 2.7-3.6 V) + * [31:12]: Reserved (shall be set to '0') + * [11:8]: Supply Voltage (VHS) 0x1 (Range: 2.7-3.6 V) * [7:0]: Check Pattern (recommended 0xaa) * CMD8 Response: R7 */ diff --git a/nuttx/drivers/mtd/Make.defs b/nuttx/drivers/mtd/Make.defs index 258e77ec9..7db7592d4 100644 --- a/nuttx/drivers/mtd/Make.defs +++ b/nuttx/drivers/mtd/Make.defs @@ -51,6 +51,10 @@ ifeq ($(CONFIG_MTD_W25),y) CSRCS += w25.c endif +ifeq ($(CONFIG_MTD_AT25),y) +CSRCS += at25.c +endif + # Include MTD driver support DEPPATH += --dep-path mtd diff --git a/nuttx/drivers/mtd/at25.c b/nuttx/drivers/mtd/at25.c new file mode 100644 index 000000000..e35b794a5 --- /dev/null +++ b/nuttx/drivers/mtd/at25.c @@ -0,0 +1,708 @@ +/************************************************************************************ + * drivers/mtd/at25.c + * Driver for SPI-based AT25DF321 (32Mbit) flash. + * + * Copyright (C) 2009-2012 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * Petteri Aimonen <jpa@nx.mail.kapsi.fi> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include <nuttx/config.h> + +#include <sys/types.h> +#include <stdint.h> +#include <stdbool.h> +#include <stdlib.h> +#include <unistd.h> +#include <errno.h> +#include <debug.h> + +#include <nuttx/kmalloc.h> +#include <nuttx/fs/ioctl.h> +#include <nuttx/spi.h> +#include <nuttx/mtd.h> + +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ + +#ifndef CONFIG_AT25_SPIMODE +# define CONFIG_AT25_SPIMODE SPIDEV_MODE0 +#endif + +/* AT25 Registers *******************************************************************/ +/* Indentification register values */ + +#define AT25_MANUFACTURER 0x1F +#define AT25_AT25DF321_TYPE 0x47 /* 32 M-bit */ + +/* AT25DF321 capacity is 4,194,304 bytes: + * (64 sectors) * (65,536 bytes per sector) + * (16384 pages) * (256 bytes per page) + */ + +#define AT25_AT25DF321_SECTOR_SHIFT 12 /* Sector size 1 << 12 = 4096 */ +#define AT25_AT25DF321_NSECTORS 1024 +#define AT25_AT25DF321_PAGE_SHIFT 9 /* Page size 1 << 9 = 512 */ +#define AT25_AT25DF321_NPAGES 8192 + +/* Instructions */ +/* Command Value N Description Addr Dummy Data */ +#define AT25_WREN 0x06 /* 1 Write Enable 0 0 0 */ +#define AT25_WRDI 0x04 /* 1 Write Disable 0 0 0 */ +#define AT25_RDID 0x9f /* 1 Read Identification 0 0 1-3 */ +#define AT25_RDSR 0x05 /* 1 Read Status Register 0 0 >=1 */ +#define AT25_WRSR 0x01 /* 1 Write Status Register 0 0 1 */ +#define AT25_READ 0x03 /* 1 Read Data Bytes 3 0 >=1 */ +#define AT25_FAST_READ 0x0b /* 1 Higher speed read 3 1 >=1 */ +#define AT25_PP 0x02 /* 1 Page Program 3 0 1-256 */ +#define AT25_SE 0x20 /* 1 Sector Erase 3 0 0 */ +#define AT25_BE 0xc7 /* 1 Bulk Erase 0 0 0 */ +#define AT25_DP 0xb9 /* 2 Deep power down 0 0 0 */ +#define AT25_RES 0xab /* 2 Read Electronic Signature 0 3 >=1 */ + +/* Status register bit definitions */ + +#define AT25_SR_WIP (1 << 0) /* Bit 0: Write in progress bit */ +#define AT25_SR_WEL (1 << 1) /* Bit 1: Write enable latch bit */ +#define AT25_SR_EPE (1 << 5) /* Bit 5: Erase/program error */ +#define AT25_SR_UNPROT 0x00 /* Global unprotect command */ + +#define AT25_DUMMY 0xa5 + +/************************************************************************************ + * Private Types + ************************************************************************************/ + +/* This type represents the state of the MTD device. The struct mtd_dev_s + * must appear at the beginning of the definition so that you can freely + * cast between pointers to struct mtd_dev_s and struct at25_dev_s. + */ + +struct at25_dev_s +{ + struct mtd_dev_s mtd; /* MTD interface */ + FAR struct spi_dev_s *dev; /* Saved SPI interface instance */ + uint8_t sectorshift; /* 16 or 18 */ + uint8_t pageshift; /* 8 */ + uint16_t nsectors; /* 128 or 64 */ + uint32_t npages; /* 32,768 or 65,536 */ +}; + +/************************************************************************************ + * Private Function Prototypes + ************************************************************************************/ + +/* Helpers */ + +static void at25_lock(FAR struct spi_dev_s *dev); +static inline void at25_unlock(FAR struct spi_dev_s *dev); +static inline int at25_readid(struct at25_dev_s *priv); +static void at25_waitwritecomplete(struct at25_dev_s *priv); +static void at25_writeenable(struct at25_dev_s *priv); +static inline void at25_sectorerase(struct at25_dev_s *priv, off_t offset); +static inline int at25_bulkerase(struct at25_dev_s *priv); +static inline void at25_pagewrite(struct at25_dev_s *priv, FAR const uint8_t *buffer, + off_t offset); + +/* MTD driver methods */ + +static int at25_erase(FAR struct mtd_dev_s *dev, off_t startblock, size_t nblocks); +static ssize_t at25_bread(FAR struct mtd_dev_s *dev, off_t startblock, + size_t nblocks, FAR uint8_t *buf); +static ssize_t at25_bwrite(FAR struct mtd_dev_s *dev, off_t startblock, + size_t nblocks, FAR const uint8_t *buf); +static ssize_t at25_read(FAR struct mtd_dev_s *dev, off_t offset, size_t nbytes, + FAR uint8_t *buffer); +static int at25_ioctl(FAR struct mtd_dev_s *dev, int cmd, unsigned long arg); + +/************************************************************************************ + * Private Data + ************************************************************************************/ + +/************************************************************************************ + * Private Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: at25_lock + ************************************************************************************/ + +static void at25_lock(FAR struct spi_dev_s *dev) +{ + /* On SPI busses where there are multiple devices, it will be necessary to + * lock SPI to have exclusive access to the busses for a sequence of + * transfers. The bus should be locked before the chip is selected. + * + * This is a blocking call and will not return until we have exclusiv access to + * the SPI buss. We will retain that exclusive access until the bus is unlocked. + */ + + (void)SPI_LOCK(dev, true); + + /* After locking the SPI bus, the we also need call the setfrequency, setbits, and + * setmode methods to make sure that the SPI is properly configured for the device. + * If the SPI buss is being shared, then it may have been left in an incompatible + * state. + */ + + SPI_SETMODE(dev, CONFIG_AT25_SPIMODE); + SPI_SETBITS(dev, 8); + (void)SPI_SETFREQUENCY(dev, 20000000); +} + +/************************************************************************************ + * Name: at25_unlock + ************************************************************************************/ + +static inline void at25_unlock(FAR struct spi_dev_s *dev) +{ + (void)SPI_LOCK(dev, false); +} + +/************************************************************************************ + * Name: at25_readid + ************************************************************************************/ + +static inline int at25_readid(struct at25_dev_s *priv) +{ + uint16_t manufacturer; + uint16_t memory; + uint16_t version; + + fvdbg("priv: %p\n", priv); + + /* Lock the SPI bus, configure the bus, and select this FLASH part. */ + + at25_lock(priv->dev); + SPI_SELECT(priv->dev, SPIDEV_FLASH, true); + + /* Send the "Read ID (RDID)" command and read the first three ID bytes */ + + (void)SPI_SEND(priv->dev, AT25_RDID); + manufacturer = SPI_SEND(priv->dev, AT25_DUMMY); + memory = SPI_SEND(priv->dev, AT25_DUMMY); + + /* Deselect the FLASH and unlock the bus */ + + SPI_SELECT(priv->dev, SPIDEV_FLASH, false); + at25_unlock(priv->dev); + + fvdbg("manufacturer: %02x memory: %02x\n", + manufacturer, memory); + + /* Check for a valid manufacturer and memory type */ + + if (manufacturer == AT25_MANUFACTURER && memory == AT25_AT25DF321_TYPE) + { + priv->sectorshift = AT25_AT25DF321_SECTOR_SHIFT; + priv->nsectors = AT25_AT25DF321_NSECTORS; + priv->pageshift = AT25_AT25DF321_PAGE_SHIFT; + priv->npages = AT25_AT25DF321_NPAGES; + return OK; + } + + return -ENODEV; +} + +/************************************************************************************ + * Name: at25_waitwritecomplete + ************************************************************************************/ + +static void at25_waitwritecomplete(struct at25_dev_s *priv) +{ + uint8_t status; + + /* Are we the only device on the bus? */ + +#ifdef CONFIG_SPI_OWNBUS + + /* Select this FLASH part */ + + SPI_SELECT(priv->dev, SPIDEV_FLASH, true); + + /* Send "Read Status Register (RDSR)" command */ + + (void)SPI_SEND(priv->dev, AT25_RDSR); + + /* Loop as long as the memory is busy with a write cycle */ + + do + { + /* Send a dummy byte to generate the clock needed to shift out the status */ + + status = SPI_SEND(priv->dev, AT25_DUMMY); + } + while ((status & AT25_SR_WIP) != 0); + + /* Deselect the FLASH */ + + SPI_SELECT(priv->dev, SPIDEV_FLASH, false); + +#else + + /* Loop as long as the memory is busy with a write cycle */ + + do + { + /* Select this FLASH part */ + + SPI_SELECT(priv->dev, SPIDEV_FLASH, true); + + /* Send "Read Status Register (RDSR)" command */ + + (void)SPI_SEND(priv->dev, AT25_RDSR); + + /* Send a dummy byte to generate the clock needed to shift out the status */ + + status = SPI_SEND(priv->dev, AT25_DUMMY); + + /* Deselect the FLASH */ + + SPI_SELECT(priv->dev, SPIDEV_FLASH, false); + + /* Given that writing could take up to few tens of milliseconds, and erasing + * could take more. The following short delay in the "busy" case will allow + * other peripherals to access the SPI bus. + */ + + if ((status & AT25_SR_WIP) != 0) + { + at25_unlock(priv->dev); + usleep(10000); + at25_lock(priv->dev); + } + } + while ((status & AT25_SR_WIP) != 0); +#endif + + if (status & AT25_SR_EPE) + { + fdbg("Write error, status: 0x%02x\n", status); + } + + fvdbg("Complete, status: 0x%02x\n", status); +} + +/************************************************************************************ + * Name: at25_writeenable + ************************************************************************************/ + +static void at25_writeenable(struct at25_dev_s *priv) +{ + SPI_SELECT(priv->dev, SPIDEV_FLASH, true); + (void)SPI_SEND(priv->dev, AT25_WREN); + SPI_SELECT(priv->dev, SPIDEV_FLASH, false); + fvdbg("Enabled\n"); +} + +/************************************************************************************ + * Name: at25_sectorerase + ************************************************************************************/ + +static inline void at25_sectorerase(struct at25_dev_s *priv, off_t sector) +{ + off_t offset = sector << priv->sectorshift; + + fvdbg("sector: %08lx\n", (long)sector); + + /* Wait for any preceding write to complete. We could simplify things by + * perform this wait at the end of each write operation (rather than at + * the beginning of ALL operations), but have the wait first will slightly + * improve performance. + */ + + at25_waitwritecomplete(priv); + + /* Send write enable instruction */ + + at25_writeenable(priv); + + /* Select this FLASH part */ + + SPI_SELECT(priv->dev, SPIDEV_FLASH, true); + + /* Send the "Sector Erase (SE)" instruction */ + + (void)SPI_SEND(priv->dev, AT25_SE); + + /* Send the sector offset high byte first. For all of the supported + * parts, the sector number is completely contained in the first byte + * and the values used in the following two bytes don't really matter. + */ + + (void)SPI_SEND(priv->dev, (offset >> 16) & 0xff); + (void)SPI_SEND(priv->dev, (offset >> 8) & 0xff); + (void)SPI_SEND(priv->dev, offset & 0xff); + + /* Deselect the FLASH */ + + SPI_SELECT(priv->dev, SPIDEV_FLASH, false); + fvdbg("Erased\n"); +} + +/************************************************************************************ + * Name: at25_bulkerase + ************************************************************************************/ + +static inline int at25_bulkerase(struct at25_dev_s *priv) +{ + fvdbg("priv: %p\n", priv); + + /* Wait for any preceding write to complete. We could simplify things by + * perform this wait at the end of each write operation (rather than at + * the beginning of ALL operations), but have the wait first will slightly + * improve performance. + */ + + at25_waitwritecomplete(priv); + + /* Send write enable instruction */ + + at25_writeenable(priv); + + /* Select this FLASH part */ + + SPI_SELECT(priv->dev, SPIDEV_FLASH, true); + + /* Send the "Bulk Erase (BE)" instruction */ + + (void)SPI_SEND(priv->dev, AT25_BE); + + /* Deselect the FLASH */ + + SPI_SELECT(priv->dev, SPIDEV_FLASH, false); + fvdbg("Return: OK\n"); + return OK; +} + +/************************************************************************************ + * Name: at25_pagewrite + ************************************************************************************/ + +static inline void at25_pagewrite(struct at25_dev_s *priv, FAR const uint8_t *buffer, + off_t page) +{ + off_t offset = page << 8; + + fvdbg("page: %08lx offset: %08lx\n", (long)page, (long)offset); + + /* Wait for any preceding write to complete. We could simplify things by + * perform this wait at the end of each write operation (rather than at + * the beginning of ALL operations), but have the wait first will slightly + * improve performance. + */ + + at25_waitwritecomplete(priv); + + /* Enable the write access to the FLASH */ + + at25_writeenable(priv); + + /* Select this FLASH part */ + + SPI_SELECT(priv->dev, SPIDEV_FLASH, true); + + /* Send "Page Program (PP)" command */ + + (void)SPI_SEND(priv->dev, AT25_PP); + + /* Send the page offset high byte first. */ + + (void)SPI_SEND(priv->dev, (offset >> 16) & 0xff); + (void)SPI_SEND(priv->dev, (offset >> 8) & 0xff); + (void)SPI_SEND(priv->dev, offset & 0xff); + + /* Then write the specified number of bytes */ + + SPI_SNDBLOCK(priv->dev, buffer, 256); + + /* Deselect the FLASH: Chip Select high */ + + SPI_SELECT(priv->dev, SPIDEV_FLASH, false); + fvdbg("Written\n"); +} + +/************************************************************************************ + * Name: at25_erase + ************************************************************************************/ + +static int at25_erase(FAR struct mtd_dev_s *dev, off_t startblock, size_t nblocks) +{ + FAR struct at25_dev_s *priv = (FAR struct at25_dev_s *)dev; + size_t blocksleft = nblocks; + + fvdbg("startblock: %08lx nblocks: %d\n", (long)startblock, (int)nblocks); + + /* Lock access to the SPI bus until we complete the erase */ + + at25_lock(priv->dev); + while (blocksleft-- > 0) + { + /* Erase each sector */ + + at25_sectorerase(priv, startblock); + startblock++; + } + + at25_unlock(priv->dev); + return (int)nblocks; +} + +/************************************************************************************ + * Name: at25_bread + ************************************************************************************/ + +static ssize_t at25_bread(FAR struct mtd_dev_s *dev, off_t startblock, size_t nblocks, + FAR uint8_t *buffer) +{ + FAR struct at25_dev_s *priv = (FAR struct at25_dev_s *)dev; + ssize_t nbytes; + + fvdbg("startblock: %08lx nblocks: %d\n", (long)startblock, (int)nblocks); + + /* On this device, we can handle the block read just like the byte-oriented read */ + + nbytes = at25_read(dev, startblock << priv->pageshift, nblocks << priv->pageshift, buffer); + if (nbytes > 0) + { + return nbytes >> priv->pageshift; + } + + return (int)nbytes; +} + +/************************************************************************************ + * Name: at25_bwrite + ************************************************************************************/ + +static ssize_t at25_bwrite(FAR struct mtd_dev_s *dev, off_t startblock, size_t nblocks, + FAR const uint8_t *buffer) +{ + FAR struct at25_dev_s *priv = (FAR struct at25_dev_s *)dev; + size_t blocksleft = nblocks; + + fvdbg("startblock: %08lx nblocks: %d\n", (long)startblock, (int)nblocks); + + /* Lock the SPI bus and write each page to FLASH */ + + at25_lock(priv->dev); + while (blocksleft-- > 0) + { + at25_pagewrite(priv, buffer, startblock * 2); + at25_pagewrite(priv, buffer + 256, startblock * 2 + 1); + buffer += 1 << priv->pageshift; + startblock++; + } + + at25_unlock(priv->dev); + return nblocks; +} + +/************************************************************************************ + * Name: at25_read + ************************************************************************************/ + +static ssize_t at25_read(FAR struct mtd_dev_s *dev, off_t offset, size_t nbytes, + FAR uint8_t *buffer) +{ + FAR struct at25_dev_s *priv = (FAR struct at25_dev_s *)dev; + + fvdbg("offset: %08lx nbytes: %d\n", (long)offset, (int)nbytes); + + /* Wait for any preceding write to complete. We could simplify things by + * perform this wait at the end of each write operation (rather than at + * the beginning of ALL operations), but have the wait first will slightly + * improve performance. + */ + + at25_waitwritecomplete(priv); + + /* Lock the SPI bus and select this FLASH part */ + + at25_lock(priv->dev); + SPI_SELECT(priv->dev, SPIDEV_FLASH, true); + + /* Send "Read from Memory " instruction */ + + (void)SPI_SEND(priv->dev, AT25_READ); + + /* Send the page offset high byte first. */ + + (void)SPI_SEND(priv->dev, (offset >> 16) & 0xff); + (void)SPI_SEND(priv->dev, (offset >> 8) & 0xff); + (void)SPI_SEND(priv->dev, offset & 0xff); + + /* Then read all of the requested bytes */ + + SPI_RECVBLOCK(priv->dev, buffer, nbytes); + + /* Deselect the FLASH and unlock the SPI bus */ + + SPI_SELECT(priv->dev, SPIDEV_FLASH, false); + at25_unlock(priv->dev); + + fvdbg("return nbytes: %d\n", (int)nbytes); + return nbytes; +} + +/************************************************************************************ + * Name: at25_ioctl + ************************************************************************************/ + +static int at25_ioctl(FAR struct mtd_dev_s *dev, int cmd, unsigned long arg) +{ + FAR struct at25_dev_s *priv = (FAR struct at25_dev_s *)dev; + int ret = -EINVAL; /* Assume good command with bad parameters */ + + fvdbg("cmd: %d \n", cmd); + + switch (cmd) + { + case MTDIOC_GEOMETRY: + { + FAR struct mtd_geometry_s *geo = (FAR struct mtd_geometry_s *)((uintptr_t)arg); + if (geo) + { + /* Populate the geometry structure with information need to know + * the capacity and how to access the device. + * + * NOTE: that the device is treated as though it where just an array + * of fixed size blocks. That is most likely not true, but the client + * will expect the device logic to do whatever is necessary to make it + * appear so. + */ + + geo->blocksize = (1 << priv->pageshift); + geo->erasesize = (1 << priv->sectorshift); + geo->neraseblocks = priv->nsectors; + ret = OK; + + fvdbg("blocksize: %d erasesize: %d neraseblocks: %d\n", + geo->blocksize, geo->erasesize, geo->neraseblocks); + } + } + break; + + case MTDIOC_BULKERASE: + { + /* Erase the entire device */ + + at25_lock(priv->dev); + ret = at25_bulkerase(priv); + at25_unlock(priv->dev); + } + break; + + case MTDIOC_XIPBASE: + default: + ret = -ENOTTY; /* Bad command */ + break; + } + + fvdbg("return %d\n", ret); + return ret; +} + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: at25_initialize + * + * Description: + * Create an initialize MTD device instance. MTD devices are not registered + * in the file system, but are created as instances that can be bound to + * other functions (such as a block or character driver front end). + * + ************************************************************************************/ + +FAR struct mtd_dev_s *at25_initialize(FAR struct spi_dev_s *dev) +{ + FAR struct at25_dev_s *priv; + int ret; + + fvdbg("dev: %p\n", dev); + + /* Allocate a state structure (we allocate the structure instead of using + * a fixed, static allocation so that we can handle multiple FLASH devices. + * The current implementation would handle only one FLASH part per SPI + * device (only because of the SPIDEV_FLASH definition) and so would have + * to be extended to handle multiple FLASH parts on the same SPI bus. + */ + + priv = (FAR struct at25_dev_s *)kmalloc(sizeof(struct at25_dev_s)); + if (priv) + { + /* Initialize the allocated structure */ + + priv->mtd.erase = at25_erase; + priv->mtd.bread = at25_bread; + priv->mtd.bwrite = at25_bwrite; + priv->mtd.read = at25_read; + priv->mtd.ioctl = at25_ioctl; + priv->dev = dev; + + /* Deselect the FLASH */ + + SPI_SELECT(dev, SPIDEV_FLASH, false); + + /* Identify the FLASH chip and get its capacity */ + + ret = at25_readid(priv); + if (ret != OK) + { + /* Unrecognized! Discard all of that work we just did and return NULL */ + + fdbg("Unrecognized\n"); + kfree(priv); + priv = NULL; + } + + /* Unprotect all sectors */ + + at25_writeenable(priv); + SPI_SELECT(priv->dev, SPIDEV_FLASH, true); + (void)SPI_SEND(priv->dev, AT25_WRSR); + (void)SPI_SEND(priv->dev, AT25_SR_UNPROT); + SPI_SELECT(priv->dev, SPIDEV_FLASH, false); + } + + /* Return the implementation-specific state structure as the MTD device */ + + fvdbg("Return %p\n", priv); + return (FAR struct mtd_dev_s *)priv; +} diff --git a/nuttx/drivers/mtd/ftl.c b/nuttx/drivers/mtd/ftl.c index cdb35aa5c..6cf8f0317 100644 --- a/nuttx/drivers/mtd/ftl.c +++ b/nuttx/drivers/mtd/ftl.c @@ -1,7 +1,7 @@ /**************************************************************************** * drivers/mtd/ftl.c * - * Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved. + * Copyright (C) 2009, 2011-2012 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <gnutt@nuttx.org> * * Redistribution and use in source and binary forms, with or without @@ -229,6 +229,10 @@ static ssize_t ftl_flush(FAR void *priv, FAR const uint8_t *buffer, remaining = nblocks; if (alignedblock > startblock) { + /* Check if the write is shorter than to the end of the erase block */ + + bool short_write = (remaining < (alignedblock - startblock)); + /* Read the full erase block into the buffer */ rwblock = startblock & ~mask; @@ -252,9 +256,19 @@ static ssize_t ftl_flush(FAR void *priv, FAR const uint8_t *buffer, /* Copy the user data at the end of the buffered erase block */ offset = (startblock & mask) * dev->geo.blocksize; - nbytes = dev->geo.erasesize - offset; + + if (short_write) + { + nbytes = remaining * dev->geo.blocksize; + } + else + { + nbytes = dev->geo.erasesize - offset; + } + fvdbg("Copy %d bytes into erase block=%d at offset=%d\n", nbytes, eraseblock, offset); + memcpy(dev->eblock + offset, buffer, nbytes); /* And write the erase back to flash */ @@ -268,8 +282,16 @@ static ssize_t ftl_flush(FAR void *priv, FAR const uint8_t *buffer, /* Then update for amount written */ - remaining -= dev->blkper - (startblock & mask); - buffer += nbytes; + if (short_write) + { + remaining = 0; + } + else + { + remaining -= dev->blkper - (startblock & mask); + } + + buffer += nbytes; } /* How handle full erase pages in the middle */ @@ -290,6 +312,7 @@ static ssize_t ftl_flush(FAR void *priv, FAR const uint8_t *buffer, fvdbg("Write %d bytes into erase block=%d at offset=0\n", dev->geo.erasesize, alignedblock); + nxfrd = MTD_BWRITE(dev->mtd, alignedblock, dev->blkper, buffer); if (nxfrd != dev->blkper) { diff --git a/nuttx/drivers/power/Make.defs b/nuttx/drivers/power/Make.defs index 45c6aebc3..e3452120d 100644 --- a/nuttx/drivers/power/Make.defs +++ b/nuttx/drivers/power/Make.defs @@ -47,7 +47,7 @@ CSRCS += pm_activity.c pm_changestate.c pm_checkstate.c pm_initialize.c pm_regis POWER_DEPPATH := --dep-path power POWER_VPATH := :power -POWER_CFLAGS := ${shell $(TOPDIR)/tools/incdir.sh $(INCDIROPT) "$(CC)" $(TOPDIR)/drivers/power} +POWER_CFLAGS := ${shell $(INCDIR) $(INCDIROPT) "$(CC)" $(TOPDIR)$(DELIM)drivers$(DELIM)power} endif @@ -73,7 +73,7 @@ endif POWER_DEPPATH := --dep-path power POWER_VPATH := :power -POWER_CFLAGS := ${shell $(TOPDIR)/tools/incdir.sh $(INCDIROPT) "$(CC)" $(TOPDIR)/drivers/power} +POWER_CFLAGS := ${shell $(INCDIR) $(INCDIROPT) "$(CC)" $(TOPDIR)$(DELIM)drivers$(DELIM)power} endif diff --git a/nuttx/drivers/sensors/Make.defs b/nuttx/drivers/sensors/Make.defs index 866ccb053..1713edb99 100644 --- a/nuttx/drivers/sensors/Make.defs +++ b/nuttx/drivers/sensors/Make.defs @@ -1,7 +1,7 @@ ############################################################################ # drivers/sensors/Make.defs # -# Copyright (C) 2011 Gregory Nutt. All rights reserved. +# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without @@ -57,4 +57,4 @@ endif DEPPATH += --dep-path sensors VPATH += :sensors -CFLAGS += ${shell $(TOPDIR)/tools/incdir.sh $(INCDIROPT) "$(CC)" $(TOPDIR)/drivers/sensors} +CFLAGS += ${shell $(INCDIR) $(INCDIROPT) "$(CC)" $(TOPDIR)$(DELIM)drivers$(DELIM)sensors} diff --git a/nuttx/drivers/serial/Kconfig b/nuttx/drivers/serial/Kconfig index 43869fdec..a1e0dff49 100644 --- a/nuttx/drivers/serial/Kconfig +++ b/nuttx/drivers/serial/Kconfig @@ -3,10 +3,12 @@ # see misc/tools/kconfig-language.txt. # -config LOWLEVEL_CONSOLE +config DEV_LOWCONSOLE bool "Low-level console support" default n depends on ARCH_LOWPUTC + ---help--- + Use the simple, low-level, write-only serial console driver (minimal support) config 16550_UART bool "16550 UART Chip support" @@ -317,7 +319,7 @@ config STANDARD_SERIAL bool "Enable standard \"upper-half\" serial driver" default y if MCU_SERIAL default n if !MCU_SERIAL - depends on !LOWLEVEL_CONSOLE + depends on !DEV_LOWCONSOLE ---help--- Enable the standard, upper-half serial driver used by most MCU serial peripherals. @@ -422,7 +424,7 @@ config UART_TXBUFSIZE config UART_BAUD int "baud rate" - default 11520 + default 115200 help The configured BAUD of the UART. @@ -465,7 +467,7 @@ config UART0_TXBUFSIZE config UART0_BAUD int "baud rate" - default 11520 + default 115200 help The configured BAUD of the UART. @@ -508,7 +510,7 @@ config USART0_TXBUFSIZE config USART0_BAUD int "baud rate" - default 11520 + default 115200 help The configured BAUD of the USART. @@ -551,7 +553,7 @@ config UART1_TXBUFSIZE config UART1_BAUD int "baud rate" - default 11520 + default 115200 help The configured BAUD of the UART. @@ -594,7 +596,7 @@ config USART1_TXBUFSIZE config USART1_BAUD int "baud rate" - default 11520 + default 115200 help The configured BAUD of the USART. @@ -637,7 +639,7 @@ config UART2_TXBUFSIZE config UART2_BAUD int "baud rate" - default 11520 + default 115200 help The configured BAUD of the UART. @@ -680,7 +682,7 @@ config USART2_TXBUFSIZE config USART2_BAUD int "baud rate" - default 11520 + default 115200 help The configured BAUD of the USART. @@ -723,7 +725,7 @@ config UART3_TXBUFSIZE config UART3_BAUD int "baud rate" - default 11520 + default 115200 help The configured BAUD of the UART. @@ -766,7 +768,7 @@ config USART3_TXBUFSIZE config USART3_BAUD int "baud rate" - default 11520 + default 115200 help The configured BAUD of the USART. @@ -809,7 +811,7 @@ config UART4_TXBUFSIZE config UART4_BAUD int "baud rate" - default 11520 + default 115200 help The configured BAUD of the UART. @@ -852,7 +854,7 @@ config USART4_TXBUFSIZE config USART4_BAUD int "baud rate" - default 11520 + default 115200 help The configured BAUD of the USART. @@ -895,7 +897,7 @@ config UART5_TXBUFSIZE config UART5_BAUD int "baud rate" - default 11520 + default 115200 help The configured BAUD of the UART. @@ -938,7 +940,7 @@ config USART5_TXBUFSIZE config USART5_BAUD int "baud rate" - default 11520 + default 115200 help The configured BAUD of the USART. @@ -981,7 +983,7 @@ config USART6_TXBUFSIZE config USART6_BAUD int "baud rate" - default 11520 + default 115200 help The configured BAUD of the USART. @@ -1024,7 +1026,7 @@ config UART6_TXBUFSIZE config UART6_BAUD int "baud rate" - default 11520 + default 115200 help The configured BAUD of the UART. diff --git a/nuttx/drivers/serial/serial.c b/nuttx/drivers/serial/serial.c index da326f8c6..30ad8ff6e 100644 --- a/nuttx/drivers/serial/serial.c +++ b/nuttx/drivers/serial/serial.c @@ -233,7 +233,9 @@ static int uart_putxmitchar(FAR uart_dev_t *dev, int ch) } } - /* We won't get here */ + /* We won't get here. Some compilers may complain that this code is + * unreachable. + */ return OK; } diff --git a/nuttx/drivers/usbdev/Make.defs b/nuttx/drivers/usbdev/Make.defs index f1b3c405a..e43693b29 100644 --- a/nuttx/drivers/usbdev/Make.defs +++ b/nuttx/drivers/usbdev/Make.defs @@ -59,5 +59,5 @@ CSRCS += usbdev_trace.c usbdev_trprintf.c DEPPATH += --dep-path usbdev VPATH += :usbdev -CFLAGS += ${shell $(TOPDIR)/tools/incdir.sh $(INCDIROPT) "$(CC)" $(TOPDIR)/drivers/usbdev} +CFLAGS += ${shell $(INCDIR) $(INCDIROPT) "$(CC)" $(TOPDIR)$(DELIM)drivers$(DELIM)usbdev} endif diff --git a/nuttx/drivers/usbhost/Make.defs b/nuttx/drivers/usbhost/Make.defs index fd54ab53e..ebb522695 100644 --- a/nuttx/drivers/usbhost/Make.defs +++ b/nuttx/drivers/usbhost/Make.defs @@ -1,7 +1,7 @@ ############################################################################ # drivers/usbhost/Make.defs # -# Copyright (C) 2010-2011 Gregory Nutt. All rights reserved. +# Copyright (C) 2010-2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without @@ -45,7 +45,7 @@ CSRCS += usbhost_enumerate.c usbhost_storage.c usbhost_hidkbd.c # Include add-on USB host driver logic (see misc/drivers) ifeq ($(CONFIG_NET),y) - RTL8187_CSRC := ${shell if [ -f usbhost/rtl8187x.c ]; then echo "rtl8187x.c"; fi} + RTL8187_CSRC := ${shell if [ -f usbhost$(DELIM)rtl8187x.c ]; then echo "rtl8187x.c"; fi} CSRCS += $(RTL8187_CSRC) endif endif @@ -54,4 +54,4 @@ endif DEPPATH += --dep-path usbhost VPATH += :usbhost -CFLAGS += ${shell $(TOPDIR)/tools/incdir.sh $(INCDIROPT) "$(CC)" $(TOPDIR)/drivers/usbhost} +CFLAGS += ${shell $(INCDIR) $(INCDIROPT) "$(CC)" $(TOPDIR)$(DELIM)drivers$(DELIM)usbhost} diff --git a/nuttx/drivers/wireless/Make.defs b/nuttx/drivers/wireless/Make.defs index f47f7666a..fa8e8acb5 100644 --- a/nuttx/drivers/wireless/Make.defs +++ b/nuttx/drivers/wireless/Make.defs @@ -1,7 +1,7 @@ ############################################################################ # drivers/wireless/Make.defs # -# Copyright (C) 2011 Gregory Nutt. All rights reserved. +# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without @@ -41,7 +41,7 @@ CSRCS += cc1101.c ISM1_868MHzGFSK100kbps.c ISM2_905MHzGFSK250kbps.c # Include wireless build support -DEPPATH += --dep-path wireless/cc1101 -VPATH += :wireless/cc1101 -CFLAGS += ${shell $(TOPDIR)/tools/incdir.sh $(INCDIROPT) "$(CC)" $(TOPDIR)/drivers/wireless/cc1101} +DEPPATH += --dep-path wireless$(DELIM)cc1101 +VPATH += :wireless$(DELIM)cc1101 +CFLAGS += ${shell $(INCDIR) $(INCDIROPT) "$(CC)" $(TOPDIR)$(DELIM)drivers$(DELIM)wireless$(DELIM)cc1101} endif |