diff options
Diffstat (limited to 'nuttx/fs/nxffs/nxffs_dump.c')
-rw-r--r-- | nuttx/fs/nxffs/nxffs_dump.c | 479 |
1 files changed, 0 insertions, 479 deletions
diff --git a/nuttx/fs/nxffs/nxffs_dump.c b/nuttx/fs/nxffs/nxffs_dump.c deleted file mode 100644 index 9caac4c4b..000000000 --- a/nuttx/fs/nxffs/nxffs_dump.c +++ /dev/null @@ -1,479 +0,0 @@ -/**************************************************************************** - * fs/nxffs/nxffs_dump.c - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * References: Linux/Documentation/filesystems/romfs.txt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/**************************************************************************** - * Included Files - ****************************************************************************/ - -#include <nuttx/config.h> - -#include <string.h> -#include <debug.h> -#include <errno.h> -#include <crc32.h> - -#include <nuttx/kmalloc.h> -#include <nuttx/fs/ioctl.h> -#include <nuttx/mtd.h> - -#include "nxffs.h" - -/**************************************************************************** - * Pre-processor Definitions - ****************************************************************************/ -/* Re-define fdbg so that the output does not have so much diagnostic info. - * This should still, however, always agree with the defintion in debug.h. - */ - -#undef fdbg -#define fdbg syslog - -/**************************************************************************** - * Private Types - ****************************************************************************/ - -struct nxffs_blkinfo_s -{ - struct mtd_geometry_s geo; - FAR uint8_t *buffer; - off_t nblocks; - off_t block; - off_t offset; - bool verbose; -}; - -/**************************************************************************** - * Private Data - ****************************************************************************/ - -static const char g_hdrformat[] = " BLOCK:OFFS TYPE STATE LENGTH\n"; -static const char g_format[] = " %5d:%-5d %s %s %5d\n"; - -/**************************************************************************** - * Private Functions - ****************************************************************************/ - -/**************************************************************************** - * Name: nxffs_analyzeinode - * - * Description: - * Analyze one candidate inode found in the block. - * - ****************************************************************************/ - -#if defined(CONFIG_DEBUG) && defined(CONFIG_DEBUG_FS) -static inline ssize_t nxffs_analyzeinode(FAR struct nxffs_blkinfo_s *blkinfo, - int offset) -{ - FAR struct nxffs_inode_s inode; - off_t nextblock; - uint8_t state; - uint32_t noffs; - uint32_t doffs; - uint32_t utc; - uint32_t ecrc; - uint32_t datlen; - uint32_t crc; - size_t spaceleft; - - /* Verify that there is space for an inode header remaining in the block */ - - if (offset + SIZEOF_NXFFS_INODE_HDR > blkinfo->geo.blocksize) - { - /* No.. then this can't be an inode header */ - - return ERROR; - } - - /* Unpack the header */ - - memcpy(&inode, &blkinfo->buffer[offset], SIZEOF_NXFFS_INODE_HDR); - noffs = nxffs_rdle32(inode.noffs); - doffs = nxffs_rdle32(inode.doffs); - utc = nxffs_rdle32(inode.utc); - ecrc = nxffs_rdle32(inode.crc); - datlen = nxffs_rdle32(inode.datlen); - - /* Misc. sanity checks */ - - if (noffs < blkinfo->offset + offset + SIZEOF_NXFFS_BLOCK_HDR) - { - /* The name begins before the inode header. This can't can't be - * a real inode header (or it is a corrupted one). - */ - - return ERROR; - } - - - /* Can we verify the inode? We need to have the inode name in the same - * block to do that (or get access to the next block) - */ - - if (doffs < blkinfo->offset + offset + SIZEOF_NXFFS_BLOCK_HDR) - { - /* The first data block begins before the inode header. This can't can't - * be a real inode header (or it is a corrupted one). - */ - - return ERROR; - } - - spaceleft = (blkinfo->nblocks - blkinfo->block) * blkinfo->geo.blocksize; - spaceleft -= (offset + SIZEOF_NXFFS_BLOCK_HDR); - if (datlen > spaceleft) - { - /* The data length is greater than what would fit in the rest of FLASH - * (even ignoring block and data header sizes. - */ - - return ERROR; - } - - /* The name begins after the inode header. Does it begin in this block? */ - - nextblock = blkinfo->offset + blkinfo->geo.blocksize; - if (noffs > nextblock) - { - /* Not than we cannot verify the inode header */ - - if (blkinfo->verbose) - { - fdbg(g_format, blkinfo->block, offset, "INODE", "UNVERFD", datlen); - } - return ERROR; - } - - /* The name begins in this block. Does it also end in this block? */ - - if (noffs + inode.namlen > nextblock) - { - /* No.. Assume that this is not an inode. */ - - return ERROR; - } - - /* Calculate the CRC */ - - state = inode.state; - inode.state = CONFIG_NXFFS_ERASEDSTATE; - nxffs_wrle32(inode.crc, 0); - - crc = crc32((FAR const uint8_t *)&inode, SIZEOF_NXFFS_INODE_HDR); - crc = crc32part(&blkinfo->buffer[noffs - blkinfo->offset], inode.namlen, crc); - - if (crc != ecrc) - { - fdbg(g_format, blkinfo->block, offset, "INODE", "CRC BAD", datlen); - return ERROR; - } - - /* If must be a good header */ - - if (state == INODE_STATE_FILE) - { - if (blkinfo->verbose) - { - fdbg(g_format, blkinfo->block, offset, "INODE", "OK ", datlen); - } - } - else if (state == INODE_STATE_DELETED) - { - if (blkinfo->verbose) - { - fdbg(g_format, blkinfo->block, offset, "INODE", "DELETED", datlen); - } - } - else - { - fdbg(g_format, blkinfo->block, offset, "INODE", "CORRUPT", datlen); - } - - /* Return the block-relative offset to the next byte after the inode name */ - - return noffs + inode.namlen - offset - blkinfo->offset; -} -#endif - -/**************************************************************************** - * Name: nxffs_analyzedata - * - * Description: - * Analyze one candidate inode found in the block. - * - ****************************************************************************/ - -#if defined(CONFIG_DEBUG) && defined(CONFIG_DEBUG_FS) -static inline ssize_t nxffs_analyzedata(FAR struct nxffs_blkinfo_s *blkinfo, - int offset) -{ - struct nxffs_data_s dathdr; - uint32_t ecrc; - uint16_t datlen; - uint32_t crc; - - /* Copy and unpack the data block header */ - - memcpy(&dathdr, &blkinfo->buffer[offset], SIZEOF_NXFFS_DATA_HDR); - ecrc = nxffs_rdle32(dathdr.crc); - datlen = nxffs_rdle16(dathdr.datlen); - - /* Sanity checks */ - - if (offset + SIZEOF_NXFFS_DATA_HDR + datlen > blkinfo->geo.blocksize) - { - /* Data does not fit in within the block, this can't be a data block */ - - return ERROR; - } - - /* Calculate the CRC */ - - nxffs_wrle32(dathdr.crc, 0); - - crc = crc32((FAR const uint8_t *)&dathdr, SIZEOF_NXFFS_DATA_HDR); - crc = crc32part(&blkinfo->buffer[offset + SIZEOF_NXFFS_DATA_HDR], datlen, crc); - - if (crc != ecrc) - { - fdbg(g_format, blkinfo->block, offset, "DATA ", "CRC BAD", datlen); - return ERROR; - } - - /* If must be a good header */ - - if (blkinfo->verbose) - { - fdbg(g_format, blkinfo->block, offset, "DATA ", "OK ", datlen); - } - return SIZEOF_NXFFS_DATA_HDR + datlen; -} -#endif - -/**************************************************************************** - * Name: nxffs_analyze - * - * Description: - * Analyze the content of one block. - * - ****************************************************************************/ - -#if defined(CONFIG_DEBUG) && defined(CONFIG_DEBUG_FS) -static inline void nxffs_analyze(FAR struct nxffs_blkinfo_s *blkinfo) -{ - FAR struct nxffs_block_s *blkhdr; - ssize_t nbytes; - int hdrndx; - int datndx; - int inndx; - int i; - - /* Verify that there is a header on the block */ - - blkhdr = (FAR struct nxffs_block_s *)blkinfo->buffer; - if (memcmp(blkhdr->magic, g_blockmagic, NXFFS_MAGICSIZE) != 0) - { - fdbg(g_format, blkinfo->block, 0, "BLOCK", "NO FRMT", - blkinfo->geo.blocksize); - } - else if (blkhdr->state == BLOCK_STATE_GOOD) - { - size_t datsize = blkinfo->geo.blocksize - SIZEOF_NXFFS_BLOCK_HDR; - size_t nerased = nxffs_erased(blkinfo->buffer + SIZEOF_NXFFS_BLOCK_HDR, datsize); - if (nerased == datsize) - { - if (blkinfo->verbose) - { - fdbg(g_format, blkinfo->block, 0, "BLOCK", "ERASED ", - blkinfo->geo.blocksize); - } - return; - } -#if 0 /* Too much output, to little information */ - else - { - fdbg(g_format, blkinfo->block, 0, "BLOCK", "IN USE ", - blkinfo->geo.blocksize); - } -#endif - } - else if (blkhdr->state == BLOCK_STATE_BAD) - { - fdbg(g_format, blkinfo->block, 0, "BLOCK", "BAD ", - blkinfo->geo.blocksize); - } - else - { - fdbg(g_format, blkinfo->block, 0, "BLOCK", "CORRUPT", - blkinfo->geo.blocksize); - } - - /* Serach for Inode and data block headers. */ - - inndx = 0; - datndx = 0; - - for (i = SIZEOF_NXFFS_BLOCK_HDR; i < blkinfo->geo.blocksize; i++) - { - uint8_t ch = blkinfo->buffer[i]; - - if (ch == g_inodemagic[inndx]) - { - inndx++; - datndx = 0; - - if (inndx == NXFFS_MAGICSIZE) - { - hdrndx = i - NXFFS_MAGICSIZE + 1; - nbytes = nxffs_analyzeinode(blkinfo, hdrndx); - if (nbytes > 0) - { - i = hdrndx + nbytes - 1; - } - inndx = 0; - } - } - else if (ch == g_datamagic[datndx]) - { - datndx++; - inndx = 0; - - if (datndx == NXFFS_MAGICSIZE) - { - hdrndx = i - NXFFS_MAGICSIZE + 1; - nbytes = nxffs_analyzedata(blkinfo, hdrndx); - if (nbytes > 0) - { - i = hdrndx + nbytes - 1; - } - datndx = 0; - } - } - } - -} -#endif - -/**************************************************************************** - * Public Functions - ****************************************************************************/ - -/**************************************************************************** - * Name: nxffs_dump - * - * Description: - * Dump a summary of the contents of an NXFFS file system. CONFIG_DEBUG - * and CONFIG_DEBUG_FS must be enabled for this function to do anything. - * - * Input Parameters: - * mtd - The MTD device that provides the interface to NXFFS-formatted - * media. - * verbose - FALSE: only show errors - * - * Returned Value: - * Zero is returned on success. Otherwise, a negated errno value is - * returned to indicate the nature of the failure. - * - ****************************************************************************/ - -int nxffs_dump(FAR struct mtd_dev_s *mtd, bool verbose) -{ -#if defined(CONFIG_DEBUG) && defined(CONFIG_DEBUG_FS) - struct nxffs_blkinfo_s blkinfo; - int ret; - - /* Get the volume geometry. (casting to uintptr_t first eliminates - * complaints on some architectures where the sizeof long is different - * from the size of a pointer). - */ - - memset(&blkinfo, 0, sizeof(struct nxffs_blkinfo_s)); - ret = MTD_IOCTL(mtd, MTDIOC_GEOMETRY, (unsigned long)((uintptr_t)&blkinfo.geo)); - if (ret < 0) - { - fdbg("ERROR: MTD ioctl(MTDIOC_GEOMETRY) failed: %d\n", -ret); - goto errout; - } - - /* Save the verbose output indication */ - - blkinfo.verbose = verbose; - - /* Allocate a buffer to hold one block */ - - blkinfo.buffer = (FAR uint8_t *)kmalloc(blkinfo.geo.blocksize); - if (!blkinfo.buffer) - { - fdbg("ERROR: Failed to allocate block cache\n"); - ret = -ENOMEM; - goto errout; - } - - /* Now read every block on the device */ - - fdbg("NXFFS Dump:\n"); - fdbg(g_hdrformat); - - blkinfo.nblocks = blkinfo.geo.erasesize * blkinfo.geo.neraseblocks / blkinfo.geo.blocksize; - for (blkinfo.block = 0, blkinfo.offset = 0; - blkinfo.block < blkinfo.nblocks; - blkinfo.block++, blkinfo.offset += blkinfo.geo.blocksize) - { - /* Read the next block */ - - ret = MTD_BREAD(mtd, blkinfo.block, 1, blkinfo.buffer); - if (ret < 0) - { - fdbg("ERROR: Failed to read block %d\n", blkinfo.block); - goto errout_with_block; - } - - /* Analyze the block */ - - nxffs_analyze(&blkinfo); - } - fdbg("%d blocks analyzed\n", blkinfo.nblocks); - -errout_with_block: - kfree(blkinfo.buffer); -errout: - return ret; - -#else - return -ENOSYS; -#endif -} |