diff options
Diffstat (limited to 'nuttx/fs/nxffs/nxffs_read.c')
-rw-r--r-- | nuttx/fs/nxffs/nxffs_read.c | 473 |
1 files changed, 0 insertions, 473 deletions
diff --git a/nuttx/fs/nxffs/nxffs_read.c b/nuttx/fs/nxffs/nxffs_read.c deleted file mode 100644 index b638dbfd4..000000000 --- a/nuttx/fs/nxffs/nxffs_read.c +++ /dev/null @@ -1,473 +0,0 @@ -/**************************************************************************** - * fs/nxffs/nxffs_read.c - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * References: Linux/Documentation/filesystems/romfs.txt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/**************************************************************************** - * Included Files - ****************************************************************************/ - -#include <nuttx/config.h> - -#include <string.h> -#include <fcntl.h> -#include <crc32.h> -#include <assert.h> -#include <errno.h> -#include <debug.h> - -#include <nuttx/fs/fs.h> -#include <nuttx/mtd.h> - -#include "nxffs.h" - -/**************************************************************************** - * Pre-processor Definitions - ****************************************************************************/ - -/**************************************************************************** - * Public Types - ****************************************************************************/ - -/**************************************************************************** - * Public Variables - ****************************************************************************/ - -/**************************************************************************** - * Private Functions - ****************************************************************************/ - -/**************************************************************************** - * Name: nxffs_rdseek - * - * Description: - * Seek to the file position before read or write access. Note that the - * simplier nxffs_ioseek() cannot be used for this purpose. File offsets - * are not easily mapped to FLASH offsets due to intervening block and - * data headers. - * - * Input Parameters: - * volume - Describes the current volume - * entry - Describes the open inode - * fpos - The desired file position - * blkentry - Describes the block entry that we are positioned in - * - ****************************************************************************/ - -static ssize_t nxffs_rdseek(FAR struct nxffs_volume_s *volume, - FAR struct nxffs_entry_s *entry, - off_t fpos, - FAR struct nxffs_blkentry_s *blkentry) -{ - size_t datstart; - size_t datend; - off_t offset; - int ret; - - /* The initial FLASH offset will be the offset to first data block of - * the inode - */ - - offset = entry->doffset; - if (offset == 0) - { - /* Zero length files will have no data blocks */ - - return -ENOSPC; - } - - /* Loop until we read the data block containing the desired position */ - - datend = 0; - do - { - /* Check if the next data block contains the sought after file position */ - - ret = nxffs_nextblock(volume, offset, blkentry); - if (ret < 0) - { - fdbg("nxffs_nextblock failed: %d\n", -ret); - return ret; - } - - /* Get the range of data offsets for this data block */ - - datstart = datend; - datend += blkentry->datlen; - - /* Offset to search for the the next data block */ - - offset = blkentry->hoffset + SIZEOF_NXFFS_DATA_HDR + blkentry->datlen; - } - while (datend <= fpos); - - /* Return the offset to the data within the current data block */ - - blkentry->foffset = fpos - datstart; - nxffs_ioseek(volume, blkentry->hoffset + SIZEOF_NXFFS_DATA_HDR + blkentry->foffset); - return OK; -} - -/**************************************************************************** - * Public Functions - ****************************************************************************/ -/**************************************************************************** - * Name: nxffs_read - * - * Description: - * This is an implementation of the NuttX standard file system read - * method. - * - ****************************************************************************/ - -ssize_t nxffs_read(FAR struct file *filep, FAR char *buffer, size_t buflen) -{ - FAR struct nxffs_volume_s *volume; - FAR struct nxffs_ofile_s *ofile; - struct nxffs_blkentry_s blkentry; - ssize_t total; - size_t available; - size_t readsize; - int ret; - - fvdbg("Read %d bytes from offset %d\n", buflen, filep->f_pos); - - /* Sanity checks */ - - DEBUGASSERT(filep->f_priv != NULL && filep->f_inode != NULL); - - /* Recover the open file state from the struct file instance */ - - ofile = (FAR struct nxffs_ofile_s *)filep->f_priv; - - /* Recover the volume state from the open file */ - - volume = (FAR struct nxffs_volume_s *)filep->f_inode->i_private; - DEBUGASSERT(volume != NULL); - - /* Get exclusive access to the volume. Note that the volume exclsem - * protects the open file list. - */ - - ret = sem_wait(&volume->exclsem); - if (ret != OK) - { - ret = -errno; - fdbg("sem_wait failed: %d\n", ret); - goto errout; - } - - /* Check if the file was opened with read access */ - - if ((ofile->oflags & O_RDOK) == 0) - { - fdbg("File not open for read access\n"); - ret = -EACCES; - goto errout_with_semaphore; - } - - /* Loop until all bytes have been read */ - - for (total = 0; total < buflen; ) - { - /* Don't seek past the end of the file */ - - if (filep->f_pos >= ofile->entry.datlen) - { - /* Return the partial read */ - - filep->f_pos = ofile->entry.datlen; - break; - } - - /* Seek to the current file offset */ - - ret = nxffs_rdseek(volume, &ofile->entry, filep->f_pos, &blkentry); - if (ret < 0) - { - fdbg("nxffs_rdseek failed: %d\n", -ret); - ret = -EACCES; - goto errout_with_semaphore; - } - - /* How many bytes are available at this offset */ - - available = blkentry.datlen - blkentry.foffset; - - /* Don't read more than we need to */ - - readsize = buflen - total; - if (readsize > available) - { - readsize = available; - } - - /* Read data from that file offset */ - - memcpy(&buffer[total], &volume->cache[volume->iooffset], readsize); - - /* Update the file offset */ - - filep->f_pos += readsize; - total += readsize; - } - - sem_post(&volume->exclsem); - return total; - -errout_with_semaphore: - sem_post(&volume->exclsem); -errout: - return (ssize_t)ret; -} - -/**************************************************************************** - * Name: nxffs_nextblock - * - * Description: - * Search for the next valid data block starting at the provided - * FLASH offset. - * - * Input Parameters: - * volume - Describes the NXFFS volume. - * datlen - A memory location to return the data block length. - * - * Returned Value: - * Zero is returned on success. Otherwise, a negated errno is returned - * that indicates the nature of the failure. - * - ****************************************************************************/ - -int nxffs_nextblock(FAR struct nxffs_volume_s *volume, off_t offset, - FAR struct nxffs_blkentry_s *blkentry) -{ - int nmagic; - int ch; - int nerased; - int ret; - - /* Seek to the first FLASH offset provided by the caller. */ - - nxffs_ioseek(volume, offset); - - /* Skip the block header */ - - if (volume->iooffset < SIZEOF_NXFFS_BLOCK_HDR) - { - volume->iooffset = SIZEOF_NXFFS_BLOCK_HDR; - } - - /* Then begin searching */ - - nerased = 0; - nmagic = 0; - - for (;;) - { - /* Read the next character */ - - ch = nxffs_getc(volume, SIZEOF_NXFFS_DATA_HDR - nmagic); - if (ch < 0) - { - fvdbg("nxffs_getc failed: %d\n", -ch); - return ch; - } - - /* Check for another erased byte */ - - else if (ch == CONFIG_NXFFS_ERASEDSTATE) - { - /* If we have encountered NXFFS_NERASED number of consecutive - * erased bytes, then presume we have reached the end of valid - * data. - */ - - if (++nerased >= NXFFS_NERASED) - { - fvdbg("No entry found\n"); - return -ENOENT; - } - } - else - { - nerased = 0; - - /* Check for the magic sequence indicating the start of an NXFFS - * data block or start of the next inode. There is the possibility - * of this magic sequnce occurring in FLASH data. However, the - * data block CRC should distinguish between real NXFFS data blocks - * headers and such false alarms. - */ - - if (ch != g_datamagic[nmagic]) - { - /* Ooops... this is the not the right character for the magic - * Sequence. Check if we need to restart or to cancel the sequence: - */ - - if (ch == g_datamagic[0]) - { - nmagic = 1; - } - else - { - nmagic = 0; - } - } - else if (nmagic < NXFFS_MAGICSIZE - 1) - { - /* We have one more character in the magic sequence */ - - nmagic++; - } - - /* We have found the magic sequence in the FLASH data that may - * indicate the beginning of an NXFFS data block. - */ - - else - { - /* The offset to the header must be 4 bytes before the current - * FLASH seek location. - */ - - blkentry->hoffset = nxffs_iotell(volume) - NXFFS_MAGICSIZE; - - /* Read the block header and verify the block at that address */ - - ret = nxffs_rdblkhdr(volume, blkentry->hoffset, &blkentry->datlen); - if (ret == OK) - { - fvdbg("Found a valid data block, offset: %d datlen: %d\n", - blkentry->hoffset, blkentry->datlen); - return OK; - } - - /* False alarm.. Restore the volume cache position (that was - * destroyed by nxfs_rdblkhdr()) and keep looking. - */ - - nxffs_ioseek(volume, blkentry->hoffset + NXFFS_MAGICSIZE); - nmagic = 0; - } - } - } - - /* We won't get here, but to keep some compilers happy: */ - - return -ENOENT; -} - -/**************************************************************************** - * Name: nxffs_rdblkhdr - * - * Description: - * Read and verify the data block header at the specified offset. - * - * Input Parameters: - * volume - Describes the current volume. - * offset - The byte offset from the beginning of FLASH where the data block - * header is expected. - * datlen - A memory location to return the data block length. - * - * Returned Value: - * Zero on success. Otherwise, a negated errno value is returned - * indicating the nature of the failure. - * - ****************************************************************************/ - -int nxffs_rdblkhdr(FAR struct nxffs_volume_s *volume, off_t offset, - FAR uint16_t *datlen) -{ - struct nxffs_data_s blkhdr; - uint32_t ecrc; - uint32_t crc; - uint16_t doffset; - uint16_t dlen; - int ret; - - /* Make sure the the block containing the data block header is in the cache */ - - nxffs_ioseek(volume, offset); - ret = nxffs_rdcache(volume, volume->ioblock); - if (ret < 0) - { - fvdbg("Failed to read data into cache: %d\n", ret); - return ret; - } - - /* Read the header at the FLASH offset */ - - doffset = volume->iooffset; - memcpy(&blkhdr, &volume->cache[doffset], SIZEOF_NXFFS_DATA_HDR); - - /* Extract the data length */ - - dlen = nxffs_rdle16(blkhdr.datlen); - - /* Get the offset to the beginning of the data */ - - doffset += SIZEOF_NXFFS_DATA_HDR; - - /* Make sure that all of the data fits within the block */ - - if ((uint32_t)doffset + (uint32_t)dlen > (uint32_t)volume->geo.blocksize) - { - fdbg("Data length=%d is unreasonable at offset=%d\n", dlen, doffset); - return -EIO; - } - - /* Extract the expected CRC and calculate the CRC of the data block */ - - ecrc = nxffs_rdle32(blkhdr.crc); - - nxffs_wrle32(blkhdr.crc, 0); - crc = crc32((FAR const uint8_t *)&blkhdr, SIZEOF_NXFFS_DATA_HDR); - crc = crc32part(&volume->cache[doffset], dlen, crc); - - if (crc != ecrc) - { - fdbg("CRC failure\n"); - return -EIO; - } - - /* Looks good! Return the data length and success */ - - *datlen = dlen; - return OK; -} - - - |