diff options
Diffstat (limited to 'nuttx/graphics/nxbe/nxbe_configure.c')
-rw-r--r-- | nuttx/graphics/nxbe/nxbe_configure.c | 219 |
1 files changed, 0 insertions, 219 deletions
diff --git a/nuttx/graphics/nxbe/nxbe_configure.c b/nuttx/graphics/nxbe/nxbe_configure.c deleted file mode 100644 index 80c71db3a..000000000 --- a/nuttx/graphics/nxbe/nxbe_configure.c +++ /dev/null @@ -1,219 +0,0 @@ -/**************************************************************************** - * graphics/nxbe/nxbe_configure.c - * - * Copyright (C) 2008-2010 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/**************************************************************************** - * Included Files - ****************************************************************************/ - -#include <nuttx/config.h> - -#include <stddef.h> -#include <errno.h> -#include <debug.h> - -#include "nxbe.h" - -/**************************************************************************** - * Pre-Processor Definitions - ****************************************************************************/ - -/**************************************************************************** - * Private Types - ****************************************************************************/ - -/**************************************************************************** - * Private Data - ****************************************************************************/ - -/**************************************************************************** - * Public Data - ****************************************************************************/ - -/**************************************************************************** - * Private Functions - ****************************************************************************/ - -/**************************************************************************** - * Public Functions - ****************************************************************************/ - -/**************************************************************************** - * Name: nxbe_configure - * - * Description: - * Configure the back end state structure based on information from the - * framebuffer driver - * - ****************************************************************************/ - -int nxbe_configure(FAR NX_DRIVERTYPE *dev, FAR struct nxbe_state_s *be) -{ - int ret; - int i; - - /* Get the video controller configuration */ - - ret = dev->getvideoinfo(dev, &be->vinfo); - if (ret < 0) - { - gdbg("Failed to get vinfo\n"); - return ret; - } - - /* Check the number of color planes */ - -#ifdef CONFIG_DEBUG - if (be->vinfo.nplanes > CONFIG_NX_NPLANES) - { - gdbg("NX configured for only %d planes, controller wants %d\n", - CONFIG_NX_NPLANES, be->vinfo.nplanes); - return -E2BIG; - } - else if (be->vinfo.nplanes < CONFIG_NX_NPLANES) - { - gdbg("NX configured for %d planes, controller only needs %d\n", - CONFIG_NX_NPLANES, be->vinfo.nplanes); - } -#endif - - /* Then get information about each color plane */ - - for (i = 0; i < be->vinfo.nplanes; i++) - { - ret = dev->getplaneinfo(dev, i, &be->plane[i].pinfo); - if (ret < 0) - { - gdbg("Failed to get pinfo[%d]\n", i); - return ret; - } - - /* Select rasterizers to match the BPP reported for this plane. - * NOTE that there are configuration options to eliminate support - * for unused BPP values. If the unused BPP values are not suppressed - * in this way, then ALL rasterizers will be drawn into the link and - * will signicantly increase the size - */ - -#ifndef CONFIG_NX_DISABLE_1BPP - if (be->plane[i].pinfo.bpp == 1) - { - be->plane[i].setpixel = nxgl_setpixel_1bpp; - be->plane[i].fillrectangle = nxgl_fillrectangle_1bpp; - be->plane[i].getrectangle = nxgl_getrectangle_1bpp; - be->plane[i].filltrapezoid = nxgl_filltrapezoid_1bpp; - be->plane[i].moverectangle = nxgl_moverectangle_1bpp; - be->plane[i].copyrectangle = nxgl_copyrectangle_1bpp; - } - else -#endif -#ifndef CONFIG_NX_DISABLE_2BPP - if (be->plane[i].pinfo.bpp == 2) - { - be->plane[i].setpixel = nxgl_setpixel_2bpp; - be->plane[i].fillrectangle = nxgl_fillrectangle_2bpp; - be->plane[i].getrectangle = nxgl_getrectangle_2bpp; - be->plane[i].filltrapezoid = nxgl_filltrapezoid_2bpp; - be->plane[i].moverectangle = nxgl_moverectangle_2bpp; - be->plane[i].copyrectangle = nxgl_copyrectangle_2bpp; - } - else -#endif -#ifndef CONFIG_NX_DISABLE_4BPP - if (be->plane[i].pinfo.bpp == 4) - { - be->plane[i].setpixel = nxgl_setpixel_4bpp; - be->plane[i].fillrectangle = nxgl_fillrectangle_4bpp; - be->plane[i].getrectangle = nxgl_getrectangle_4bpp; - be->plane[i].filltrapezoid = nxgl_filltrapezoid_4bpp; - be->plane[i].moverectangle = nxgl_moverectangle_4bpp; - be->plane[i].copyrectangle = nxgl_copyrectangle_4bpp; - } - else -#endif -#ifndef CONFIG_NX_DISABLE_8BPP - if (be->plane[i].pinfo.bpp == 8) - { - be->plane[i].setpixel = nxgl_setpixel_8bpp; - be->plane[i].fillrectangle = nxgl_fillrectangle_8bpp; - be->plane[i].getrectangle = nxgl_getrectangle_8bpp; - be->plane[i].filltrapezoid = nxgl_filltrapezoid_8bpp; - be->plane[i].moverectangle = nxgl_moverectangle_8bpp; - be->plane[i].copyrectangle = nxgl_copyrectangle_8bpp; - } - else -#endif -#ifndef CONFIG_NX_DISABLE_16BPP - if (be->plane[i].pinfo.bpp == 16) - { - be->plane[i].setpixel = nxgl_setpixel_16bpp; - be->plane[i].fillrectangle = nxgl_fillrectangle_16bpp; - be->plane[i].getrectangle = nxgl_getrectangle_16bpp; - be->plane[i].filltrapezoid = nxgl_filltrapezoid_16bpp; - be->plane[i].moverectangle = nxgl_moverectangle_16bpp; - be->plane[i].copyrectangle = nxgl_copyrectangle_16bpp; - } - else -#endif -#ifndef CONFIG_NX_DISABLE_24BPP - if (be->plane[i].pinfo.bpp == 24) - { - be->plane[i].setpixel = nxgl_setpixel_24bpp; - be->plane[i].fillrectangle = nxgl_fillrectangle_24bpp; - be->plane[i].getrectangle = nxgl_getrectangle_24bpp; - be->plane[i].filltrapezoid = nxgl_filltrapezoid_24bpp; - be->plane[i].moverectangle = nxgl_moverectangle_24bpp; - be->plane[i].copyrectangle = nxgl_copyrectangle_24bpp; - } - else -#endif -#ifndef CONFIG_NX_DISABLE_32BPP - if (be->plane[i].pinfo.bpp == 32) - { - be->plane[i].setpixel = nxgl_setpixel_32bpp; - be->plane[i].fillrectangle = nxgl_fillrectangle_32bpp; - be->plane[i].getrectangle = nxgl_getrectangle_32bpp; - be->plane[i].filltrapezoid = nxgl_filltrapezoid_32bpp; - be->plane[i].moverectangle = nxgl_moverectangle_32bpp; - be->plane[i].copyrectangle = nxgl_copyrectangle_32bpp; - } - else -#endif - { - gdbg("Unsupported pinfo[%d] BPP: %d\n", i, be->plane[i].pinfo.bpp); - return -ENOSYS; - } - } - return OK; -} |