diff options
Diffstat (limited to 'nuttx/include/nuttx/lcd/nokia6100.h')
-rw-r--r-- | nuttx/include/nuttx/lcd/nokia6100.h | 141 |
1 files changed, 0 insertions, 141 deletions
diff --git a/nuttx/include/nuttx/lcd/nokia6100.h b/nuttx/include/nuttx/lcd/nokia6100.h deleted file mode 100644 index 0fb52a40d..000000000 --- a/nuttx/include/nuttx/lcd/nokia6100.h +++ /dev/null @@ -1,141 +0,0 @@ -/**************************************************************************** - * include/nuttx/lcd/nokia6100.h - * Application interface to the Nokia 6100 LCD display - * - * Copyright (C) 2010 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -#ifndef __INCLUDE_NUTTX_NOKIA6100_H -#define __INCLUDE_NUTTX_NOKIA6100_H - -/**************************************************************************** - * Included Files - ****************************************************************************/ - -#include <stdbool.h> - -/**************************************************************************** - * Pre-processor Definitions - ****************************************************************************/ - -/* Nokia 6100 Configuration Settings: - * - * CONFIG_NOKIA6100_SPIMODE - Controls the SPI mode - * CONFIG_NOKIA6100_FREQUENCY - Define to use a different bus frequency - * CONFIG_NOKIA6100_NINTERFACES - Specifies the number of physical Nokia - * 6100 devices that will be supported. - * CONFIG_NOKIA6100_BPP - Device supports 8, 12, and 16 bits per pixel. - * CONFIG_NOKIA6100_S1D15G10 - Selects the Epson S1D15G10 display controller - * CONFIG_NOKIA6100_PCF8833 - Selects the Phillips PCF8833 display controller - * CONFIG_NOKIA6100_BLINIT - Initial backlight setting - * - * The following may need to be tuned for your hardware: - * CONFIG_NOKIA6100_INVERT - Display inversion, 0 or 1, Default: 1 - * CONFIG_NOKIA6100_MY - Display row direction, 0 or 1, Default: 0 - * CONFIG_NOKIA6100_MX - Display column direction, 0 or 1, Default: 1 - * CONFIG_NOKIA6100_V - Display address direction, 0 or 1, Default: 0 - * CONFIG_NOKIA6100_ML - Display scan direction, 0 or 1, Default: 0 - * CONFIG_NOKIA6100_RGBORD - Display RGB order, 0 or 1, Default: 0 - * - * Required LCD driver settings: - * CONFIG_LCD_NOKIA6100 - Enable Nokia 6100 support - * CONFIG_LCD_MAXCONTRAST - must be 63 with the Epson controller and 127 with - * the Phillips controller. - * CONFIG_LCD_MAXPOWER - Maximum value of backlight setting. The backlight - * control is managed outside of the 6100 driver so this value has no - * meaning to the driver. Board-specific logic may place restrictions on - * this value. - */ - -/**************************************************************************** - * Public Types - ****************************************************************************/ - -/**************************************************************************** - * Public Data - ****************************************************************************/ - -#ifdef __cplusplus -#define EXTERN extern "C" -extern "C" { -#else -#define EXTERN extern -#endif - -/**************************************************************************** - * Public Function Prototypes - ****************************************************************************/ - -/************************************************************************************** - * Name: nokia_lcdinitialize - * - * Description: - * Initialize the NOKIA6100 video hardware. The initial state of the LCD is fully - * initialized, display memory cleared, and the LCD ready to use, but with the power - * setting at 0 (full off == sleep mode). - * - * Input Parameters: - * - * spi - A reference to the SPI driver instance. - * devno - A value in the range of 0 throuh CONFIG_NOKIA6100_NINTERFACES-1. This - * allows support for multiple LCD devices. - * - * Returned Value: - * - * On success, this function returns a reference to the LCD object for the specified - * LCD. NULL is returned on any failure. - * - **************************************************************************************/ - -struct lcd_dev_s; /* see nuttx/lcd.h */ -struct spi_dev_s; /* see nuttx/spi.h */ -EXTERN FAR struct lcd_dev_s *nokia_lcdinitialize(FAR struct spi_dev_s *spi, unsigned int devno); - -/************************************************************************************** - * Name: nokia_backlight - * - * Description: - * The Nokia 6100 backlight is controlled by logic outside of the LCD assembly. This - * function must be provided by board specific logic to manage the backlight. This - * function will receive a power value (0: full off - CONFIG_LCD_MAXPOWER: full on) - * and should set the backlight accordingly. - * - **************************************************************************************/ - -EXTERN int nokia_backlight(unsigned int power); - -#undef EXTERN -#ifdef __cplusplus -} -#endif - -#endif /* __INCLUDE_NUTTX_NOKIA6100_H */ |