1 files changed, 0 insertions, 141 deletions
diff --git a/nuttx/include/nuttx/lcd/nokia6100.h b/nuttx/include/nuttx/lcd/nokia6100.h
deleted file mode 100644
index 0fb52a40d..000000000
--- a/nuttx/include/nuttx/lcd/nokia6100.h
+++ /dev/null
@@ -1,141 +0,0 @@
-/****************************************************************************
- * include/nuttx/lcd/nokia6100.h
- * Application interface to the Nokia 6100 LCD display
- *
- *   Copyright (C) 2010 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#ifndef __INCLUDE_NUTTX_NOKIA6100_H
-#define __INCLUDE_NUTTX_NOKIA6100_H
-
-/****************************************************************************
- * Included Files
- ****************************************************************************/
-
-#include <stdbool.h>
-
-/****************************************************************************
- * Pre-processor Definitions
- ****************************************************************************/
-
-/* Nokia 6100 Configuration Settings:
- *
- * CONFIG_NOKIA6100_SPIMODE - Controls the SPI mode
- * CONFIG_NOKIA6100_FREQUENCY - Define to use a different bus frequency
- * CONFIG_NOKIA6100_NINTERFACES - Specifies the number of physical Nokia
- *   6100 devices that will be supported.
- * CONFIG_NOKIA6100_BPP - Device supports 8, 12, and 16 bits per pixel.
- * CONFIG_NOKIA6100_S1D15G10 - Selects the Epson S1D15G10 display controller
- * CONFIG_NOKIA6100_PCF8833 - Selects the Phillips PCF8833 display controller
- * CONFIG_NOKIA6100_BLINIT - Initial backlight setting
- *
- * The following may need to be tuned for your hardware:
- * CONFIG_NOKIA6100_INVERT - Display inversion, 0 or 1, Default: 1
- * CONFIG_NOKIA6100_MY - Display row direction, 0 or 1, Default: 0
- * CONFIG_NOKIA6100_MX - Display column direction, 0 or 1, Default: 1
- * CONFIG_NOKIA6100_V - Display address direction, 0 or 1, Default: 0
- * CONFIG_NOKIA6100_ML - Display scan direction, 0 or 1, Default: 0
- * CONFIG_NOKIA6100_RGBORD - Display RGB order, 0 or 1, Default: 0
- *
- * Required LCD driver settings:
- * CONFIG_LCD_NOKIA6100 - Enable Nokia 6100 support
- * CONFIG_LCD_MAXCONTRAST - must be 63 with the Epson controller and 127 with
- *   the Phillips controller.
- * CONFIG_LCD_MAXPOWER - Maximum value of backlight setting.  The backlight
- *   control is managed outside of the 6100 driver so this value has no
- *   meaning to the driver.  Board-specific logic may place restrictions on
- *   this value.
- */
-
-/****************************************************************************
- * Public Types
- ****************************************************************************/
-
-/****************************************************************************
- * Public Data
- ****************************************************************************/
-
-#ifdef __cplusplus
-#define EXTERN extern "C"
-extern "C" {
-#else
-#define EXTERN extern
-#endif
-
-/****************************************************************************
- * Public Function Prototypes
- ****************************************************************************/
-
-/**************************************************************************************
- * Name:  nokia_lcdinitialize
- *
- * Description:
- *   Initialize the NOKIA6100 video hardware.  The initial state of the LCD is fully
- *   initialized, display memory cleared, and the LCD ready to use, but with the power
- *   setting at 0 (full off == sleep mode).
- *
- * Input Parameters:
- *
- *   spi - A reference to the SPI driver instance.
- *   devno - A value in the range of 0 throuh CONFIG_NOKIA6100_NINTERFACES-1.  This
- *     allows support for multiple LCD devices.
- *
- * Returned Value:
- *
- *   On success, this function returns a reference to the LCD object for the specified
- *   LCD.  NULL is returned on any failure.
- *
- **************************************************************************************/
-
-struct lcd_dev_s; /* see nuttx/lcd.h */
-struct spi_dev_s; /* see nuttx/spi.h */
-EXTERN FAR struct lcd_dev_s *nokia_lcdinitialize(FAR struct spi_dev_s *spi, unsigned int devno);
-
-/**************************************************************************************
- * Name:  nokia_backlight
- *
- * Description:
- *   The Nokia 6100 backlight is controlled by logic outside of the LCD assembly.  This
- *   function must be provided by board specific logic to manage the backlight.  This
- *   function will receive a power value (0: full off - CONFIG_LCD_MAXPOWER: full on)
- *   and should set the backlight accordingly.
- *
- **************************************************************************************/
-
-EXTERN int nokia_backlight(unsigned int power);
-
-#undef EXTERN
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __INCLUDE_NUTTX_NOKIA6100_H */