diff options
Diffstat (limited to 'nuttx/net/recvfrom.c')
-rw-r--r-- | nuttx/net/recvfrom.c | 1381 |
1 files changed, 0 insertions, 1381 deletions
diff --git a/nuttx/net/recvfrom.c b/nuttx/net/recvfrom.c deleted file mode 100644 index 6864dace3..000000000 --- a/nuttx/net/recvfrom.c +++ /dev/null @@ -1,1381 +0,0 @@ -/**************************************************************************** - * net/recvfrom.c - * - * Copyright (C) 2007-2009, 2011-2013 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/**************************************************************************** - * Included Files - ****************************************************************************/ - -#include <nuttx/config.h> - -#ifdef CONFIG_NET - -#include <sys/types.h> -#include <sys/socket.h> -#include <stdint.h> -#include <string.h> -#include <errno.h> -#include <debug.h> - -#include <arch/irq.h> -#include <nuttx/clock.h> -#include <nuttx/net/uip/uip-arch.h> - -#include "net_internal.h" -#include "uip/uip_internal.h" - -/**************************************************************************** - * Definitions - ****************************************************************************/ - -#define UDPBUF ((struct uip_udpip_hdr *)&dev->d_buf[UIP_LLH_LEN]) -#define TCPBUF ((struct uip_tcpip_hdr *)&dev->d_buf[UIP_LLH_LEN]) - -/**************************************************************************** - * Private Types - ****************************************************************************/ - -#if defined(CONFIG_NET_UDP) || defined(CONFIG_NET_TCP) -struct recvfrom_s -{ - FAR struct socket *rf_sock; /* The parent socket structure */ -#if defined(CONFIG_NET_SOCKOPTS) && !defined(CONFIG_DISABLE_CLOCK) - uint32_t rf_starttime; /* rcv start time for determining timeout */ -#endif - FAR struct uip_callback_s *rf_cb; /* Reference to callback instance */ - sem_t rf_sem; /* Semaphore signals recv completion */ - size_t rf_buflen; /* Length of receive buffer */ - char *rf_buffer; /* Pointer to receive buffer */ -#ifdef CONFIG_NET_IPv6 - FAR struct sockaddr_in6 *rf_from; /* Address of sender */ -#else - FAR struct sockaddr_in *rf_from; /* Address of sender */ -#endif - size_t rf_recvlen; /* The received length */ - int rf_result; /* Success:OK, failure:negated errno */ -}; -#endif /* CONFIG_NET_UDP || CONFIG_NET_TCP */ - -/**************************************************************************** - * Private Functions - ****************************************************************************/ - -/**************************************************************************** - * Function: recvfrom_newdata - * - * Description: - * Copy the read data from the packet - * - * Parameters: - * dev The sructure of the network driver that caused the interrupt - * pstate recvfrom state structure - * - * Returned Value: - * The number of bytes taken from the packet. - * - * Assumptions: - * Running at the interrupt level - * - ****************************************************************************/ - -#if defined(CONFIG_NET_UDP) || defined(CONFIG_NET_TCP) -static size_t recvfrom_newdata(FAR struct uip_driver_s *dev, - FAR struct recvfrom_s *pstate) -{ - size_t recvlen; - - /* Get the length of the data to return */ - - if (dev->d_len > pstate->rf_buflen) - { - recvlen = pstate->rf_buflen; - } - else - { - recvlen = dev->d_len; - } - - /* Copy the new appdata into the user buffer */ - - memcpy(pstate->rf_buffer, dev->d_appdata, recvlen); - nllvdbg("Received %d bytes (of %d)\n", (int)recvlen, (int)dev->d_len); - - /* Update the accumulated size of the data read */ - - pstate->rf_recvlen += recvlen; - pstate->rf_buffer += recvlen; - pstate->rf_buflen -= recvlen; - - return recvlen; -} -#endif /* CONFIG_NET_UDP || CONFIG_NET_TCP */ - -/**************************************************************************** - * Function: recvfrom_newtcpdata - * - * Description: - * Copy the read data from the packet - * - * Parameters: - * dev The sructure of the network driver that caused the interrupt - * pstate recvfrom state structure - * - * Returned Value: - * None. - * - * Assumptions: - * Running at the interrupt level - * - ****************************************************************************/ - -#ifdef CONFIG_NET_TCP -static inline void recvfrom_newtcpdata(FAR struct uip_driver_s *dev, - FAR struct recvfrom_s *pstate) -{ - /* Take as much data from the packet as we can */ - - size_t recvlen = recvfrom_newdata(dev, pstate); - - /* If there is more data left in the packet that we could not buffer, than - * add it to the read-ahead buffers. - */ - - if (recvlen < dev->d_len) - { -#if CONFIG_NET_NTCP_READAHEAD_BUFFERS > 0 - FAR struct uip_conn *conn = (FAR struct uip_conn *)pstate->rf_sock->s_conn; - FAR uint8_t *buffer = (FAR uint8_t *)dev->d_appdata + recvlen; - uint16_t buflen = dev->d_len - recvlen; - uint16_t nsaved; - - nsaved = uip_datahandler(conn, buffer, buflen); - - /* There are complicated buffering issues that are not addressed fully - * here. For example, what if up_datahandler() cannot buffer the - * remainder of the packet? In that case, the data will be dropped but - * still ACKed. Therefore it would not be resent. - * - * This is probably not an issue here because we only get here if the - * read-ahead buffers are empty and there would have to be something - * serioulsy wrong with the configuration not to be able to buffer a - * partial packet in this context. - */ - -#ifdef CONFIG_DEBUG_NET - if (nsaved < buflen) - { - ndbg("ERROR: packet data not saved (%d bytes)\n", buflen - nsaved); - } -#endif -#else - ndbg("ERROR: packet data lost (%d bytes)\n", dev->d_len - recvlen); -#endif - } - - /* Indicate no data in the buffer */ - - dev->d_len = 0; -} -#endif /* CONFIG_NET_TCP */ - -/**************************************************************************** - * Function: recvfrom_newudpdata - * - * Description: - * Copy the read data from the packet - * - * Parameters: - * dev The sructure of the network driver that caused the interrupt - * pstate recvfrom state structure - * - * Returned Value: - * None. - * - * Assumptions: - * Running at the interrupt level - * - ****************************************************************************/ - -#ifdef CONFIG_NET_UDP -static inline void recvfrom_newudpdata(FAR struct uip_driver_s *dev, - FAR struct recvfrom_s *pstate) -{ - /* Take as much data from the packet as we can */ - - (void)recvfrom_newdata(dev, pstate); - - /* Indicate no data in the buffer */ - - dev->d_len = 0; -} -#endif /* CONFIG_NET_TCP */ - -/**************************************************************************** - * Function: recvfrom_readahead - * - * Description: - * Copy the read data from the packet - * - * Parameters: - * dev The sructure of the network driver that caused the interrupt - * pstate recvfrom state structure - * - * Returned Value: - * None - * - * Assumptions: - * Running at the interrupt level - * - ****************************************************************************/ - -#if defined(CONFIG_NET_TCP) && CONFIG_NET_NTCP_READAHEAD_BUFFERS > 0 -static inline void recvfrom_readahead(struct recvfrom_s *pstate) -{ - FAR struct uip_conn *conn = (FAR struct uip_conn *)pstate->rf_sock->s_conn; - FAR struct uip_readahead_s *readahead; - size_t recvlen; - - /* Check there is any TCP data already buffered in a read-ahead - * buffer. - */ - - do - { - /* Get the read-ahead buffer at the head of the list (if any) */ - - readahead = (struct uip_readahead_s *)sq_remfirst(&conn->readahead); - if (readahead) - { - /* We have a new buffer... transfer that buffered data into - * the user buffer. - * - * First, get the length of the data to transfer. - */ - - if (readahead->rh_nbytes > pstate->rf_buflen) - { - recvlen = pstate->rf_buflen; - } - else - { - recvlen = readahead->rh_nbytes; - } - - if (recvlen > 0) - { - /* Copy the read-ahead data into the user buffer */ - - memcpy(pstate->rf_buffer, readahead->rh_buffer, recvlen); - nllvdbg("Received %d bytes (of %d)\n", recvlen, readahead->rh_nbytes); - - /* Update the accumulated size of the data read */ - - pstate->rf_recvlen += recvlen; - pstate->rf_buffer += recvlen; - pstate->rf_buflen -= recvlen; - } - - /* If the read-ahead buffer is empty, then release it. If not, then - * we will have to move the data down and return the buffer to the - * front of the list. - */ - - if (recvlen < readahead->rh_nbytes) - { - readahead->rh_nbytes -= recvlen; - memcpy(readahead->rh_buffer, &readahead->rh_buffer[recvlen], - readahead->rh_nbytes); - sq_addfirst(&readahead->rh_node, &conn->readahead); - } - else - { - uip_tcpreadaheadrelease(readahead); - } - } - } - while (readahead && pstate->rf_buflen > 0); -} -#endif /* CONFIG_NET_UDP || CONFIG_NET_TCP */ - -/**************************************************************************** - * Function: recvfrom_timeout - * - * Description: - * Check for recvfrom timeout. - * - * Parameters: - * pstate recvfrom state structure - * - * Returned Value: - * TRUE:timeout FALSE:no timeout - * - * Assumptions: - * Running at the interrupt level - * - ****************************************************************************/ - -#if defined(CONFIG_NET_UDP) || defined(CONFIG_NET_TCP) -#if defined(CONFIG_NET_SOCKOPTS) && !defined(CONFIG_DISABLE_CLOCK) -static int recvfrom_timeout(struct recvfrom_s *pstate) -{ - FAR struct socket *psock = 0; - socktimeo_t timeo = 0; - - /* Check for a timeout configured via setsockopts(SO_RCVTIMEO). If none... - * we well let the read hang forever (except for the special case below). - */ - - /* Get the socket reference from the private data */ - - psock = pstate->rf_sock; - if (psock) - { - /* Recover the timeout value (zero if no timeout) */ - - timeo = psock->s_rcvtimeo; - } - - /* Use a fixed, configurable delay under the following circumstances: - * - * 1) This delay function has been enabled with CONFIG_NET_TCP_RECVDELAY > 0 - * 2) Some data has already been received from the socket. Since this can - * only be true for a TCP/IP socket, this logic applies only to TCP/IP - * sockets. And either - * 3) There is no configured receive timeout, or - * 4) The configured receive timeout is greater than than the delay - */ - -#if CONFIG_NET_TCP_RECVDELAY > 0 - if ((timeo == 0 || timeo > CONFIG_NET_TCP_RECVDELAY) && - pstate->rf_recvlen > 0) - { - /* Use the configured timeout */ - - timeo = CONFIG_NET_TCP_RECVDELAY; - } -#endif - - /* Is there an effective timeout? */ - - if (timeo) - { - /* Yes.. Check if the timeout has elapsed */ - - return net_timeo(pstate->rf_starttime, timeo); - } - - /* No timeout -- hang forever waiting for data. */ - - return FALSE; -} -#endif /* CONFIG_NET_SOCKOPTS && !CONFIG_DISABLE_CLOCK */ -#endif /* CONFIG_NET_UDP || CONFIG_NET_TCP */ - -/**************************************************************************** - * Function: recvfrom_tcpsender - * - * Description: - * Getting the sender's address from the UDP packet - * - * Parameters: - * dev - The device driver data structure - * pstate - the recvfrom state structure - * - * Returned Value: - * None - * - * Assumptions: - * Running at the interrupt level - * - ****************************************************************************/ - -#ifdef CONFIG_NET_TCP -static inline void recvfrom_tcpsender(struct uip_driver_s *dev, struct recvfrom_s *pstate) -{ -#ifdef CONFIG_NET_IPv6 - FAR struct sockaddr_in6 *infrom = pstate->rf_from; -#else - FAR struct sockaddr_in *infrom = pstate->rf_from; -#endif - - if (infrom) - { - infrom->sin_family = AF_INET; - infrom->sin_port = TCPBUF->srcport; - -#ifdef CONFIG_NET_IPv6 - uip_ipaddr_copy(infrom->sin6_addr.s6_addr, TCPBUF->srcipaddr); -#else - uip_ipaddr_copy(infrom->sin_addr.s_addr, uip_ip4addr_conv(TCPBUF->srcipaddr)); -#endif - } -} -#endif - -/**************************************************************************** - * Function: recvfrom_tcpinterrupt - * - * Description: - * This function is called from the interrupt level to perform the actual - * TCP receive operation via by the uIP layer. - * - * Parameters: - * dev The structure of the network driver that caused the interrupt - * conn The connection structure associated with the socket - * flags Set of events describing why the callback was invoked - * - * Returned Value: - * None - * - * Assumptions: - * Running at the interrupt level - * - ****************************************************************************/ - -#ifdef CONFIG_NET_TCP -static uint16_t recvfrom_tcpinterrupt(FAR struct uip_driver_s *dev, - FAR void *conn, FAR void *pvpriv, - uint16_t flags) -{ - FAR struct recvfrom_s *pstate = (struct recvfrom_s *)pvpriv; - - nllvdbg("flags: %04x\n", flags); - - /* 'priv' might be null in some race conditions (?) */ - - if (pstate) - { - /* If new data is available, then complete the read action. */ - - if ((flags & UIP_NEWDATA) != 0) - { - /* Copy the data from the packet (saving any unused bytes from the - * packet in the read-ahead buffer). - */ - - recvfrom_newtcpdata(dev, pstate); - - /* Save the sender's address in the caller's 'from' location */ - - recvfrom_tcpsender(dev, pstate); - - /* Indicate that the data has been consumed and that an ACK - * should be sent. - */ - - flags = (flags & ~UIP_NEWDATA) | UIP_SNDACK; - - /* Check for transfer complete. We will consider the transfer - * complete in own of two different ways, depending on the setting - * of CONFIG_NET_TCP_RECVDELAY. - * - * 1) If CONFIG_NET_TCP_RECVDELAY == 0 then we will consider the - * TCP/IP transfer complete as soon as any data has been received. - * This is safe because if any additional data is received, it - * will be retained inthe TCP/IP read-ahead buffer until the - * next receive is performed. - * 2) CONFIG_NET_TCP_RECVDELAY > 0 may be set to wait a little - * bit to determine if more data will be received. You might - * do this if read-ahead buffereing is disabled and we want to - * minimize the loss of back-to-back packets. In this case, - * the transfer is complete when either a) the entire user buffer - * is full or 2) when the receive timeout occurs (below). - */ - -#if CONFIG_NET_TCP_RECVDELAY > 0 - if (pstate->rf_buflen == 0) -#else - if (pstate->rf_recvlen > 0) -#endif - { - nllvdbg("TCP resume\n"); - - /* The TCP receive buffer is full. Return now and don't allow - * any further TCP call backs. - */ - - pstate->rf_cb->flags = 0; - pstate->rf_cb->priv = NULL; - pstate->rf_cb->event = NULL; - - /* Wake up the waiting thread, returning the number of bytes - * actually read. - */ - - sem_post(&pstate->rf_sem); - } - - /* Reset the timeout. We will want a short timeout to terminate - * the TCP receive. - */ - -#if defined(CONFIG_NET_SOCKOPTS) && !defined(CONFIG_DISABLE_CLOCK) - pstate->rf_starttime = clock_systimer(); -#endif - } - - /* Check for a loss of connection. - * - * UIP_CLOSE: The remote host has closed the connection - * UIP_ABORT: The remote host has aborted the connection - * UIP_TIMEDOUT: Connection aborted due to too many retransmissions. - */ - - else if ((flags & (UIP_CLOSE|UIP_ABORT|UIP_TIMEDOUT)) != 0) - { - nllvdbg("Lost connection\n"); - - /* Stop further callbacks */ - - pstate->rf_cb->flags = 0; - pstate->rf_cb->priv = NULL; - pstate->rf_cb->event = NULL; - - /* Handle loss-of-connection event */ - - net_lostconnection(pstate->rf_sock, flags); - - /* Check if the peer gracefully closed the connection. */ - - if ((flags & UIP_CLOSE) != 0) - { - /* This case should always return success (zero)! The value of - * rf_recvlen, if zero, will indicate that the connection was - * gracefully closed. - */ - - pstate->rf_result = 0; - } - else - { - /* If no data has been received, then return ENOTCONN. - * Otherwise, let this return success. The failure will - * be reported the next time that recv[from]() is called. - */ - -#if CONFIG_NET_TCP_RECVDELAY > 0 - if (pstate->rf_recvlen > 0) - { - pstate->rf_result = 0; - } - else - { - pstate->rf_result = -ENOTCONN; - } -#else - pstate->rf_result = -ENOTCONN; -#endif - } - - /* Wake up the waiting thread */ - - sem_post(&pstate->rf_sem); - } - - /* No data has been received -- this is some other event... probably a - * poll -- check for a timeout. - */ - -#if defined(CONFIG_NET_SOCKOPTS) && !defined(CONFIG_DISABLE_CLOCK) - else if (recvfrom_timeout(pstate)) - { - /* Yes.. the timeout has elapsed... do not allow any further - * callbacks - */ - - nllvdbg("TCP timeout\n"); - - pstate->rf_cb->flags = 0; - pstate->rf_cb->priv = NULL; - pstate->rf_cb->event = NULL; - - /* Report an error only if no data has been received. (If - * CONFIG_NET_TCP_RECVDELAY then rf_recvlen should always be - * zero). - */ - -#if CONFIG_NET_TCP_RECVDELAY > 0 - if (pstate->rf_recvlen == 0) -#endif - { - /* Report the timeout error */ - - pstate->rf_result = -EAGAIN; - } - - /* Wake up the waiting thread, returning either the error -EAGAIN - * that signals the timeout event or the data received up to - * the point tht the timeout occured (no error). - */ - - sem_post(&pstate->rf_sem); - } -#endif /* CONFIG_NET_SOCKOPTS && !CONFIG_DISABLE_CLOCK */ - } - return flags; -} -#endif /* CONFIG_NET_TCP */ - -/**************************************************************************** - * Function: recvfrom_udpsender - * - * Description: - * Getting the sender's address from the UDP packet - * - * Parameters: - * dev - The device driver data structure - * pstate - the recvfrom state structure - * - * Returned Value: - * None - * - * Assumptions: - * Running at the interrupt level - * - ****************************************************************************/ - -#ifdef CONFIG_NET_UDP -static inline void recvfrom_udpsender(struct uip_driver_s *dev, struct recvfrom_s *pstate) -{ -#ifdef CONFIG_NET_IPv6 - FAR struct sockaddr_in6 *infrom = pstate->rf_from; -#else - FAR struct sockaddr_in *infrom = pstate->rf_from; -#endif - - if (infrom) - { - infrom->sin_family = AF_INET; - infrom->sin_port = UDPBUF->srcport; - -#ifdef CONFIG_NET_IPv6 - uip_ipaddr_copy(infrom->sin6_addr.s6_addr, UDPBUF->srcipaddr); -#else - uip_ipaddr_copy(infrom->sin_addr.s_addr, uip_ip4addr_conv(UDPBUF->srcipaddr)); -#endif - } -} -#endif - -/**************************************************************************** - * Function: recvfrom_udpinterrupt - * - * Description: - * This function is called from the interrupt level to perform the actual - * UDP receive operation via by the uIP layer. - * - * Parameters: - * dev The sructure of the network driver that caused the interrupt - * conn The connection structure associated with the socket - * flags Set of events describing why the callback was invoked - * - * Returned Value: - * None - * - * Assumptions: - * Running at the interrupt level - * - ****************************************************************************/ - -#ifdef CONFIG_NET_UDP -static uint16_t recvfrom_udpinterrupt(struct uip_driver_s *dev, void *pvconn, - void *pvpriv, uint16_t flags) -{ - struct recvfrom_s *pstate = (struct recvfrom_s *)pvpriv; - - nllvdbg("flags: %04x\n", flags); - - /* 'priv' might be null in some race conditions (?) */ - - if (pstate) - { - /* If new data is available, then complete the read action. */ - - if ((flags & UIP_NEWDATA) != 0) - { - /* Copy the data from the packet */ - - recvfrom_newudpdata(dev, pstate); - - /* We are finished. */ - - nllvdbg("UDP done\n"); - - /* Don't allow any further UDP call backs. */ - - pstate->rf_cb->flags = 0; - pstate->rf_cb->priv = NULL; - pstate->rf_cb->event = NULL; - - /* Save the sender's address in the caller's 'from' location */ - - recvfrom_udpsender(dev, pstate); - - /* Indicate that the data has been consumed */ - - flags &= ~UIP_NEWDATA; - - /* Wake up the waiting thread, returning the number of bytes - * actually read. - */ - - sem_post(&pstate->rf_sem); - } - - /* No data has been received -- this is some other event... probably a - * poll -- check for a timeout. - */ - -#if defined(CONFIG_NET_SOCKOPTS) && !defined(CONFIG_DISABLE_CLOCK) - else if (recvfrom_timeout(pstate)) - { - /* Yes.. the timeout has elapsed... do not allow any further - * callbacks - */ - - nllvdbg("UDP timeout\n"); - - /* Stop further callbacks */ - - pstate->rf_cb->flags = 0; - pstate->rf_cb->priv = NULL; - pstate->rf_cb->event = NULL; - - /* Report a timeout error */ - - pstate->rf_result = -EAGAIN; - - /* Wake up the waiting thread */ - - sem_post(&pstate->rf_sem); - } -#endif /* CONFIG_NET_SOCKOPTS && !CONFIG_DISABLE_CLOCK */ - } - return flags; -} -#endif /* CONFIG_NET_UDP */ - -/**************************************************************************** - * Function: recvfrom_init - * - * Description: - * Initialize the state structure - * - * Parameters: - * psock Pointer to the socket structure for the socket - * buf Buffer to receive data - * len Length of buffer - * pstate A pointer to the state structure to be initialized - * - * Returned Value: - * None - * - * Assumptions: - * - ****************************************************************************/ - -#if defined(CONFIG_NET_UDP) || defined(CONFIG_NET_TCP) -static void recvfrom_init(FAR struct socket *psock, FAR void *buf, size_t len, -#ifdef CONFIG_NET_IPv6 - FAR struct sockaddr_in6 *infrom, -#else - FAR struct sockaddr_in *infrom, -#endif - struct recvfrom_s *pstate) -{ - /* Initialize the state structure. */ - - memset(pstate, 0, sizeof(struct recvfrom_s)); - (void)sem_init(&pstate->rf_sem, 0, 0); /* Doesn't really fail */ - pstate->rf_buflen = len; - pstate->rf_buffer = buf; - pstate->rf_from = infrom; - - /* Set up the start time for the timeout */ - - pstate->rf_sock = psock; -#if defined(CONFIG_NET_SOCKOPTS) && !defined(CONFIG_DISABLE_CLOCK) - pstate->rf_starttime = clock_systimer(); -#endif -} - -/* The only uninitialization that has to be performed is destroying the - * semaphore. - */ - -#define recvfrom_uninit(s) sem_destroy(&(s)->rf_sem) - -#endif /* CONFIG_NET_UDP || CONFIG_NET_TCP */ - -/**************************************************************************** - * Function: recvfrom_result - * - * Description: - * Evaluate the result of the recv operations - * - * Parameters: - * result The result of the uip_lockedwait operation (may indicate EINTR) - * pstate A pointer to the state structure to be initialized - * - * Returned Value: - * The result of the recv operation with errno set appropriately - * - * Assumptions: - * - ****************************************************************************/ - -#if defined(CONFIG_NET_UDP) || defined(CONFIG_NET_TCP) -static ssize_t recvfrom_result(int result, struct recvfrom_s *pstate) -{ - int save_errno = errno; /* In case something we do changes it */ - - /* Check for a error/timeout detected by the interrupt handler. Errors are - * signaled by negative errno values for the rcv length - */ - - if (pstate->rf_result < 0) - { - /* This might return EAGAIN on a timeout or ENOTCONN on loss of - * connection (TCP only) - */ - - return pstate->rf_result; - } - - /* If uip_lockedwait failed, then we were probably reawakened by a signal. In - * this case, uip_lockedwait will have set errno appropriately. - */ - - if (result < 0) - { - return -save_errno; - } - - return pstate->rf_recvlen; -} -#endif /* CONFIG_NET_UDP || CONFIG_NET_TCP */ - -/**************************************************************************** - * Function: udp_recvfrom - * - * Description: - * Perform the recvfrom operation for a UDP SOCK_DGRAM - * - * Parameters: - * psock Pointer to the socket structure for the SOCK_DRAM socket - * buf Buffer to receive data - * len Length of buffer - * infrom INET ddress of source (may be NULL) - * - * Returned Value: - * On success, returns the number of characters sent. On error, - * -errno is returned (see recvfrom for list of errnos). - * - * Assumptions: - * - ****************************************************************************/ - -#ifdef CONFIG_NET_UDP -#ifdef CONFIG_NET_IPv6 -static ssize_t udp_recvfrom(FAR struct socket *psock, FAR void *buf, size_t len, - FAR struct sockaddr_in6 *infrom ) -#else -static ssize_t udp_recvfrom(FAR struct socket *psock, FAR void *buf, size_t len, - FAR struct sockaddr_in *infrom ) -#endif -{ - struct uip_udp_conn *conn = (struct uip_udp_conn *)psock->s_conn; - struct recvfrom_s state; - uip_lock_t save; - int ret; - - /* Perform the UDP recvfrom() operation */ - - /* Initialize the state structure. This is done with interrupts - * disabled because we don't want anything to happen until we - * are ready. - */ - - save = uip_lock(); - recvfrom_init(psock, buf, len, infrom, &state); - - /* Setup the UDP remote connection */ - - ret = uip_udpconnect(conn, NULL); - if (ret < 0) - { - goto errout_with_state; - } - - /* Set up the callback in the connection */ - - state.rf_cb = uip_udpcallbackalloc(conn); - if (state.rf_cb) - { - /* Set up the callback in the connection */ - - state.rf_cb->flags = UIP_NEWDATA|UIP_POLL; - state.rf_cb->priv = (void*)&state; - state.rf_cb->event = recvfrom_udpinterrupt; - - /* Enable the UDP socket */ - - uip_udpenable(conn); - - /* Wait for either the receive to complete or for an error/timeout to occur. - * NOTES: (1) uip_lockedwait will also terminate if a signal is received, (2) - * interrupts are disabled! They will be re-enabled while the task sleeps - * and automatically re-enabled when the task restarts. - */ - - ret = uip_lockedwait(&state. rf_sem); - - /* Make sure that no further interrupts are processed */ - - uip_udpdisable(conn); - uip_udpcallbackfree(conn, state.rf_cb); - ret = recvfrom_result(ret, &state); - } - else - { - ret = -EBUSY; - } - -errout_with_state: - uip_unlock(save); - recvfrom_uninit(&state); - return ret; -} -#endif /* CONFIG_NET_UDP */ - -/**************************************************************************** - * Function: tcp_recvfrom - * - * Description: - * Perform the recvfrom operation for a TCP/IP SOCK_STREAM - * - * Parameters: - * psock Pointer to the socket structure for the SOCK_DRAM socket - * buf Buffer to receive data - * len Length of buffer - * infrom INET ddress of source (may be NULL) - * - * Returned Value: - * On success, returns the number of characters sent. On error, - * -errno is returned (see recvfrom for list of errnos). - * - * Assumptions: - * - ****************************************************************************/ - -#ifdef CONFIG_NET_TCP -#ifdef CONFIG_NET_IPv6 -static ssize_t tcp_recvfrom(FAR struct socket *psock, FAR void *buf, size_t len, - FAR struct sockaddr_in6 *infrom ) -#else -static ssize_t tcp_recvfrom(FAR struct socket *psock, FAR void *buf, size_t len, - FAR struct sockaddr_in *infrom ) -#endif -{ - struct recvfrom_s state; - uip_lock_t save; - int ret; - - /* Initialize the state structure. This is done with interrupts - * disabled because we don't want anything to happen until we - * are ready. - */ - - save = uip_lock(); - recvfrom_init(psock, buf, len, infrom, &state); - - /* Handle any any TCP data already buffered in a read-ahead buffer. NOTE - * that there may be read-ahead data to be retrieved even after the - * socket has been disconnected. - */ - -#if CONFIG_NET_NTCP_READAHEAD_BUFFERS > 0 - recvfrom_readahead(&state); - - /* The default return value is the number of bytes that we just copied into - * the user buffer. We will return this if the socket has become disconnected - * or if the user request was completely satisfied with data from the readahead - * buffers. - */ - - ret = state.rf_recvlen; - -#else - /* Otherwise, the default return value of zero is used (only for the case - * where len == state.rf_buflen is zero). - */ - - ret = 0; -#endif - - /* Verify that the SOCK_STREAM has been and still is connected */ - - if (!_SS_ISCONNECTED(psock->s_flags)) - { - /* Was any data transferred from the readahead buffer after we were - * disconnected? If so, then return the number of bytes received. We - * will wait to return end disconnection indications the next time that - * recvfrom() is called. - * - * If no data was received (i.e., ret == 0 -- it will not be negative) - * and the connection was gracefully closed by the remote peer, then return - * success. If rf_recvlen is zero, the caller of recvfrom() will get an - * end-of-file indication. - */ - -#if CONFIG_NET_NTCP_READAHEAD_BUFFERS > 0 - if (ret <= 0 && !_SS_ISCLOSED(psock->s_flags)) -#else - if (!_SS_ISCLOSED(psock->s_flags)) -#endif - { - /* Nothing was previously received from the readahead buffers. - * The SOCK_STREAM must be (re-)connected in order to receive any - * additional data. - */ - - ret = -ENOTCONN; - } - } - - /* In general, this uIP-based implementation will not support non-blocking - * socket operations... except in a few cases: Here for TCP receive with read-ahead - * enabled. If this socket is configured as non-blocking then return EAGAIN - * if no data was obtained from the read-ahead buffers. - */ - - else -#if CONFIG_NET_NTCP_READAHEAD_BUFFERS > 0 - if (_SS_ISNONBLOCK(psock->s_flags)) - { - /* Return the number of bytes read from the read-ahead buffer if - * something was received (already in 'ret'); EAGAIN if not. - */ - - if (ret <= 0) - { - /* Nothing was received */ - - ret = -EAGAIN; - } - } - - /* It is okay to block if we need to. If there is space to receive anything - * more, then we will wait to receive the data. Otherwise return the number - * of bytes read from the read-ahead buffer (already in 'ret'). - */ - - else -#endif - - /* We get here when we we decide that we need to setup the wait for incoming - * TCP/IP data. Just a few more conditions to check: - * - * 1) Make sure thet there is buffer space to receive additional data - * (state.rf_buflen > 0). This could be zero, for example, if read-ahead - * buffering was enabled and we filled the user buffer with data from - * the read-ahead buffers. Aand - * 2) if read-ahead buffering is enabled (CONFIG_NET_NTCP_READAHEAD_BUFFERS > 0) - * and delay logic is disabled (CONFIG_NET_TCP_RECVDELAY == 0), then we - * not want to wait if we already obtained some data from the read-ahead - * buffer. In that case, return now with what we have (don't want for more - * because there may be no timeout). - */ - -#if CONFIG_NET_TCP_RECVDELAY == 0 && CONFIG_NET_NTCP_READAHEAD_BUFFERS > 0 - if (state.rf_recvlen == 0 && state.rf_buflen > 0) -#else - if (state.rf_buflen > 0) -#endif - { - struct uip_conn *conn = (struct uip_conn *)psock->s_conn; - - /* Set up the callback in the connection */ - - state.rf_cb = uip_tcpcallbackalloc(conn); - if (state.rf_cb) - { - state.rf_cb->flags = UIP_NEWDATA|UIP_POLL|UIP_CLOSE|UIP_ABORT|UIP_TIMEDOUT; - state.rf_cb->priv = (void*)&state; - state.rf_cb->event = recvfrom_tcpinterrupt; - - /* Wait for either the receive to complete or for an error/timeout to occur. - * NOTES: (1) uip_lockedwait will also terminate if a signal is received, (2) - * interrupts may be disabled! They will be re-enabled while the task sleeps - * and automatically re-enabled when the task restarts. - */ - - ret = uip_lockedwait(&state.rf_sem); - - /* Make sure that no further interrupts are processed */ - - uip_tcpcallbackfree(conn, state.rf_cb); - ret = recvfrom_result(ret, &state); - } - else - { - ret = -EBUSY; - } - } - - uip_unlock(save); - recvfrom_uninit(&state); - return (ssize_t)ret; -} -#endif /* CONFIG_NET_TCP */ - -/**************************************************************************** - * Global Functions - ****************************************************************************/ - -/**************************************************************************** - * Function: psock_recvfrom - * - * Description: - * recvfrom() receives messages from a socket, and may be used to receive - * data on a socket whether or not it is connection-oriented. - * - * If from is not NULL, and the underlying protocol provides the source - * address, this source address is filled in. The argument fromlen - * initialized to the size of the buffer associated with from, and modified - * on return to indicate the actual size of the address stored there. - * - * Parameters: - * psock A pointer to a NuttX-specific, internal socket structure - * buf Buffer to receive data - * len Length of buffer - * flags Receive flags - * from Address of source (may be NULL) - * fromlen The length of the address structure - * - * Returned Value: - * On success, returns the number of characters sent. If no data is - * available to be received and the peer has performed an orderly shutdown, - * recv() will return 0. Othwerwise, on errors, -1 is returned, and errno - * is set appropriately: - * - * EAGAIN - * The socket is marked non-blocking and the receive operation would block, - * or a receive timeout had been set and the timeout expired before data - * was received. - * EBADF - * The argument sockfd is an invalid descriptor. - * ECONNREFUSED - * A remote host refused to allow the network connection (typically because - * it is not running the requested service). - * EFAULT - * The receive buffer pointer(s) point outside the process's address space. - * EINTR - * The receive was interrupted by delivery of a signal before any data were - * available. - * EINVAL - * Invalid argument passed. - * ENOMEM - * Could not allocate memory. - * ENOTCONN - * The socket is associated with a connection-oriented protocol and has - * not been connected. - * ENOTSOCK - * The argument sockfd does not refer to a socket. - * - * Assumptions: - * - ****************************************************************************/ - -ssize_t psock_recvfrom(FAR struct socket *psock, FAR void *buf, size_t len, - int flags,FAR struct sockaddr *from, - FAR socklen_t *fromlen) -{ -#if defined(CONFIG_NET_UDP) || defined(CONFIG_NET_TCP) -#ifdef CONFIG_NET_IPv6 - FAR struct sockaddr_in6 *infrom = (struct sockaddr_in6 *)from; -#else - FAR struct sockaddr_in *infrom = (struct sockaddr_in *)from; -#endif -#endif - - ssize_t ret; - int err; - - /* Verify that non-NULL pointers were passed */ - -#ifdef CONFIG_DEBUG - if (!buf) - { - err = EINVAL; - goto errout; - } -#endif - - /* Verify that the sockfd corresponds to valid, allocated socket */ - - if (!psock || psock->s_crefs <= 0) - { - err = EBADF; - goto errout; - } - - /* If a 'from' address has been provided, verify that it is large - * enough to hold this address family. - */ - - if (from) - { -#ifdef CONFIG_NET_IPv6 - if (*fromlen < sizeof(struct sockaddr_in6)) -#else - if (*fromlen < sizeof(struct sockaddr_in)) -#endif - { - err = EINVAL; - goto errout; - } - } - - /* Set the socket state to receiving */ - - psock->s_flags = _SS_SETSTATE(psock->s_flags, _SF_RECV); - - /* Perform the TCP/IP or UDP recv() operation */ - -#if defined(CONFIG_NET_UDP) && defined(CONFIG_NET_TCP) - if (psock->s_type == SOCK_STREAM) - { - ret = tcp_recvfrom(psock, buf, len, infrom); - } - else - { - ret = udp_recvfrom(psock, buf, len, infrom); - } -#elif defined(CONFIG_NET_TCP) - ret = tcp_recvfrom(psock, buf, len, infrom); -#elif defined(CONFIG_NET_UDP) - ret = udp_recvfrom(psock, buf, len, infrom); -#else - ret = -ENOSYS; -#endif - - /* Set the socket state to idle */ - - psock->s_flags = _SS_SETSTATE(psock->s_flags, _SF_IDLE); - - /* Handle returned errors */ - - if (ret < 0) - { - err = -ret; - goto errout; - } - - /* Success return */ - - return ret; - -errout: - errno = err; - return ERROR; -} - -/**************************************************************************** - * Function: recvfrom - * - * Description: - * recvfrom() receives messages from a socket, and may be used to receive - * data on a socket whether or not it is connection-oriented. - * - * If from is not NULL, and the underlying protocol provides the source - * address, this source address is filled in. The argument fromlen - * initialized to the size of the buffer associated with from, and modified - * on return to indicate the actual size of the address stored there. - * - * Parameters: - * sockfd Socket descriptor of socket - * buf Buffer to receive data - * len Length of buffer - * flags Receive flags - * from Address of source (may be NULL) - * fromlen The length of the address structure - * - * Returned Value: - * On success, returns the number of characters sent. On error, - * -1 is returned, and errno is set appropriately: - * - * EAGAIN - * The socket is marked non-blocking and the receive operation would block, - * or a receive timeout had been set and the timeout expired before data - * was received. - * EBADF - * The argument sockfd is an invalid descriptor. - * ECONNREFUSED - * A remote host refused to allow the network connection (typically because - * it is not running the requested service). - * EFAULT - * The receive buffer pointer(s) point outside the process's address space. - * EINTR - * The receive was interrupted by delivery of a signal before any data were - * available. - * EINVAL - * Invalid argument passed. - * ENOMEM - * Could not allocate memory. - * ENOTCONN - * The socket is associated with a connection-oriented protocol and has - * not been connected. - * ENOTSOCK - * The argument sockfd does not refer to a socket. - * - * Assumptions: - * - ****************************************************************************/ - -ssize_t recvfrom(int sockfd, FAR void *buf, size_t len, int flags, - FAR struct sockaddr *from, FAR socklen_t *fromlen) -{ - FAR struct socket *psock; - - /* Get the underlying socket structure */ - - psock = sockfd_socket(sockfd); - - /* Then let psock_recvfrom() do all of the work */ - - return psock_recvfrom(psock, buf, len, flags, from, fromlen); -} - -#endif /* CONFIG_NET */ |