diff options
Diffstat (limited to 'src/drivers/airspeed/airspeed.h')
-rw-r--r-- | src/drivers/airspeed/airspeed.h | 169 |
1 files changed, 169 insertions, 0 deletions
diff --git a/src/drivers/airspeed/airspeed.h b/src/drivers/airspeed/airspeed.h new file mode 100644 index 000000000..89dfb22d7 --- /dev/null +++ b/src/drivers/airspeed/airspeed.h @@ -0,0 +1,169 @@ +/**************************************************************************** + * + * Copyright (C) 2013 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file airspeed.h + * @author Simon Wilks + * + * Generic driver for airspeed sensors connected via I2C. + */ + +#include <nuttx/config.h> + +#include <drivers/device/i2c.h> + +#include <sys/types.h> +#include <stdint.h> +#include <stdlib.h> +#include <stdbool.h> +#include <semaphore.h> +#include <string.h> +#include <fcntl.h> +#include <poll.h> +#include <errno.h> +#include <stdio.h> +#include <math.h> +#include <unistd.h> + +#include <nuttx/arch.h> +#include <nuttx/wqueue.h> +#include <nuttx/clock.h> + +#include <arch/board/board.h> + +#include <systemlib/airspeed.h> +#include <systemlib/err.h> +#include <systemlib/param/param.h> +#include <systemlib/perf_counter.h> + +#include <drivers/drv_airspeed.h> +#include <drivers/drv_hrt.h> + +#include <uORB/uORB.h> +#include <uORB/topics/differential_pressure.h> +#include <uORB/topics/subsystem_info.h> + +/* Default I2C bus */ +#define PX4_I2C_BUS_DEFAULT PX4_I2C_BUS_EXPANSION + +/* Oddly, ERROR is not defined for C++ */ +#ifdef ERROR +# undef ERROR +#endif +static const int ERROR = -1; + +#ifndef CONFIG_SCHED_WORKQUEUE +# error This requires CONFIG_SCHED_WORKQUEUE. +#endif + +class __EXPORT Airspeed : public device::I2C +{ +public: + Airspeed(int bus, int address, unsigned conversion_interval); + virtual ~Airspeed(); + + virtual int init(); + + virtual ssize_t read(struct file *filp, char *buffer, size_t buflen); + virtual int ioctl(struct file *filp, int cmd, unsigned long arg); + + /** + * Diagnostics - print some basic information about the driver. + */ + virtual void print_info(); + +protected: + virtual int probe(); + + /** + * Perform a poll cycle; collect from the previous measurement + * and start a new one. + */ + virtual void cycle() = 0; + virtual int measure() = 0; + virtual int collect() = 0; + + work_s _work; + unsigned _num_reports; + volatile unsigned _next_report; + volatile unsigned _oldest_report; + differential_pressure_s *_reports; + bool _sensor_ok; + int _measure_ticks; + bool _collect_phase; + float _diff_pres_offset; + + orb_advert_t _airspeed_pub; + + unsigned _conversion_interval; + + perf_counter_t _sample_perf; + perf_counter_t _comms_errors; + perf_counter_t _buffer_overflows; + + + /** + * Test whether the device supported by the driver is present at a + * specific address. + * + * @param address The I2C bus address to probe. + * @return True if the device is present. + */ + int probe_address(uint8_t address); + + /** + * Initialise the automatic measurement state machine and start it. + * + * @note This function is called at open and error time. It might make sense + * to make it more aggressive about resetting the bus in case of errors. + */ + void start(); + + /** + * Stop the automatic measurement state machine. + */ + void stop(); + + /** + * Static trampoline from the workq context; because we don't have a + * generic workq wrapper yet. + * + * @param arg Instance pointer for the driver that is polling. + */ + static void cycle_trampoline(void *arg); + +}; + +/* helper macro for handling report buffer indices */ +#define INCREMENT(_x, _lim) do { _x++; if (_x >= _lim) _x = 0; } while(0) + |