diff options
Diffstat (limited to 'src/drivers/l3gd20/l3gd20.cpp')
-rw-r--r-- | src/drivers/l3gd20/l3gd20.cpp | 56 |
1 files changed, 38 insertions, 18 deletions
diff --git a/src/drivers/l3gd20/l3gd20.cpp b/src/drivers/l3gd20/l3gd20.cpp index 90c3db9ae..37e72388b 100644 --- a/src/drivers/l3gd20/l3gd20.cpp +++ b/src/drivers/l3gd20/l3gd20.cpp @@ -34,6 +34,9 @@ /** * @file l3gd20.cpp * Driver for the ST L3GD20 MEMS gyro connected via SPI. + * + * Note: With the exception of the self-test feature, the ST L3G4200D is + * also supported by this driver. */ #include <nuttx/config.h> @@ -89,9 +92,11 @@ static const int ERROR = -1; #define ADDR_WHO_AM_I 0x0F #define WHO_I_AM_H 0xD7 #define WHO_I_AM 0xD4 +#define WHO_I_AM_L3G4200D 0xD3 /* for L3G4200D */ #define ADDR_CTRL_REG1 0x20 #define REG1_RATE_LP_MASK 0xF0 /* Mask to guard partial register update */ + /* keep lowpass low to avoid noise issues */ #define RATE_95HZ_LP_25HZ ((0<<7) | (0<<6) | (0<<5) | (1<<4)) #define RATE_190HZ_LP_25HZ ((0<<7) | (1<<6) | (0<<5) | (1<<4)) @@ -166,9 +171,14 @@ static const int ERROR = -1; #define FIFO_CTRL_BYPASS_TO_STREAM_MODE (1<<7) #define L3GD20_DEFAULT_RATE 760 +#define L3G4200D_DEFAULT_RATE 800 #define L3GD20_DEFAULT_RANGE_DPS 2000 #define L3GD20_DEFAULT_FILTER_FREQ 30 +#ifndef SENSOR_BOARD_ROTATION_DEFAULT +#define SENSOR_BOARD_ROTATION_DEFAULT SENSOR_BOARD_ROTATION_270_DEG +#endif + extern "C" { __EXPORT int l3gd20_main(int argc, char *argv[]); } class L3GD20 : public device::SPI @@ -216,6 +226,9 @@ private: math::LowPassFilter2p _gyro_filter_y; math::LowPassFilter2p _gyro_filter_z; + /* true if an L3G4200D is detected */ + bool _is_l3g4200d; + /** * Start automatic measurement. */ @@ -324,14 +337,15 @@ L3GD20::L3GD20(int bus, const char* path, spi_dev_e device) : _gyro_topic(-1), _class_instance(-1), _current_rate(0), - _orientation(SENSOR_BOARD_ROTATION_270_DEG), + _orientation(SENSOR_BOARD_ROTATION_DEFAULT), _read(0), _sample_perf(perf_alloc(PC_ELAPSED, "l3gd20_read")), _reschedules(perf_alloc(PC_COUNT, "l3gd20_reschedules")), _errors(perf_alloc(PC_COUNT, "l3gd20_errors")), _gyro_filter_x(L3GD20_DEFAULT_RATE, L3GD20_DEFAULT_FILTER_FREQ), _gyro_filter_y(L3GD20_DEFAULT_RATE, L3GD20_DEFAULT_FILTER_FREQ), - _gyro_filter_z(L3GD20_DEFAULT_RATE, L3GD20_DEFAULT_FILTER_FREQ) + _gyro_filter_z(L3GD20_DEFAULT_RATE, L3GD20_DEFAULT_FILTER_FREQ), + _is_l3g4200d(false) { // enable debug() calls _debug_enabled = true; @@ -413,14 +427,7 @@ L3GD20::probe() /* verify that the device is attached and functioning, accept L3GD20 and L3GD20H */ if (read_reg(ADDR_WHO_AM_I) == WHO_I_AM) { - #ifdef CONFIG_ARCH_BOARD_PX4FMU_V1 - _orientation = SENSOR_BOARD_ROTATION_270_DEG; - #elif CONFIG_ARCH_BOARD_PX4FMU_V2 - _orientation = SENSOR_BOARD_ROTATION_270_DEG; - #else - #error This driver needs a board selection, either CONFIG_ARCH_BOARD_PX4FMU_V1 or CONFIG_ARCH_BOARD_PX4FMU_V2 - #endif - + _orientation = SENSOR_BOARD_ROTATION_DEFAULT; success = true; } @@ -430,6 +437,13 @@ L3GD20::probe() success = true; } + /* Detect the L3G4200D used on AeroCore */ + if (read_reg(ADDR_WHO_AM_I) == WHO_I_AM_L3G4200D) { + _is_l3g4200d = true; + _orientation = SENSOR_BOARD_ROTATION_DEFAULT; + success = true; + } + if (success) return OK; @@ -502,6 +516,9 @@ L3GD20::ioctl(struct file *filp, int cmd, unsigned long arg) /* set default/max polling rate */ case SENSOR_POLLRATE_MAX: case SENSOR_POLLRATE_DEFAULT: + if (_is_l3g4200d) { + return ioctl(filp, SENSORIOCSPOLLRATE, L3G4200D_DEFAULT_RATE); + } return ioctl(filp, SENSORIOCSPOLLRATE, L3GD20_DEFAULT_RATE); /* adjust to a legal polling interval in Hz */ @@ -683,23 +700,26 @@ L3GD20::set_samplerate(unsigned frequency) uint8_t bits = REG1_POWER_NORMAL | REG1_Z_ENABLE | REG1_Y_ENABLE | REG1_X_ENABLE; if (frequency == 0) - frequency = 760; + frequency = _is_l3g4200d ? 800 : 760; - /* use limits good for H or non-H models */ + /* + * Use limits good for H or non-H models. Rates are slightly different + * for L3G4200D part but register settings are the same. + */ if (frequency <= 100) { - _current_rate = 95; + _current_rate = _is_l3g4200d ? 100 : 95; bits |= RATE_95HZ_LP_25HZ; } else if (frequency <= 200) { - _current_rate = 190; + _current_rate = _is_l3g4200d ? 200 : 190; bits |= RATE_190HZ_LP_50HZ; } else if (frequency <= 400) { - _current_rate = 380; + _current_rate = _is_l3g4200d ? 400 : 380; bits |= RATE_380HZ_LP_50HZ; } else if (frequency <= 800) { - _current_rate = 760; + _current_rate = _is_l3g4200d ? 800 : 760; bits |= RATE_760HZ_LP_50HZ; } else { return -EINVAL; @@ -772,7 +792,7 @@ L3GD20::reset() * callback fast enough to not miss data. */ write_reg(ADDR_FIFO_CTRL_REG, FIFO_CTRL_BYPASS_MODE); - set_samplerate(0); // 760Hz + set_samplerate(0); // 760Hz or 800Hz set_range(L3GD20_DEFAULT_RANGE_DPS); set_driver_lowpass_filter(L3GD20_DEFAULT_RATE, L3GD20_DEFAULT_FILTER_FREQ); @@ -971,7 +991,7 @@ start() errx(0, "already started"); /* create the driver */ - g_dev = new L3GD20(1 /* SPI bus 1 */, L3GD20_DEVICE_PATH, (spi_dev_e)PX4_SPIDEV_GYRO); + g_dev = new L3GD20(PX4_SPI_BUS_SENSORS, L3GD20_DEVICE_PATH, (spi_dev_e)PX4_SPIDEV_GYRO); if (g_dev == nullptr) goto fail; |