diff options
Diffstat (limited to 'src/drivers/meas_airspeed/meas_airspeed.cpp')
-rw-r--r-- | src/drivers/meas_airspeed/meas_airspeed.cpp | 22 |
1 files changed, 5 insertions, 17 deletions
diff --git a/src/drivers/meas_airspeed/meas_airspeed.cpp b/src/drivers/meas_airspeed/meas_airspeed.cpp index 479fa3ccf..1d9a463ad 100644 --- a/src/drivers/meas_airspeed/meas_airspeed.cpp +++ b/src/drivers/meas_airspeed/meas_airspeed.cpp @@ -228,18 +228,7 @@ MEASAirspeed::collect() // the raw value still should be compensated for the known offset diff_press_pa_raw -= _diff_pres_offset; - /* don't take the absolute value because the calibration takes this into account and warns the user if the - * tubes are connected backwards */ - float diff_press_pa = diff_press_pa_raw; - /* - note that we return both the absolute value with offset - applied and a raw value without the offset applied. This - makes it possible for higher level code to detect if the - user has the tubes connected backwards, and also makes it - possible to correctly use offsets calculated by a higher - level airspeed driver. - With the above calculation the MS4525 sensor will produce a positive number when the top port is used as a dynamic port and bottom port is used as the static port @@ -248,15 +237,14 @@ MEASAirspeed::collect() struct differential_pressure_s report; /* track maximum differential pressure measured (so we can work out top speed). */ - if (diff_press_pa > _max_differential_pressure_pa) { - _max_differential_pressure_pa = diff_press_pa; + if (diff_press_pa_raw > _max_differential_pressure_pa) { + _max_differential_pressure_pa = diff_press_pa_raw; } report.timestamp = hrt_absolute_time(); report.error_count = perf_event_count(_comms_errors); report.temperature = temperature; - report.differential_pressure_pa = diff_press_pa; - report.differential_pressure_filtered_pa = _filter.apply(diff_press_pa); + report.differential_pressure_filtered_pa = _filter.apply(diff_press_pa_raw); report.differential_pressure_raw_pa = diff_press_pa_raw; report.max_differential_pressure_pa = _max_differential_pressure_pa; @@ -514,7 +502,7 @@ test() } warnx("single read"); - warnx("diff pressure: %d pa", (int)report.differential_pressure_pa); + warnx("diff pressure: %d pa", (int)report.differential_pressure_filtered_pa); /* start the sensor polling at 2Hz */ if (OK != ioctl(fd, SENSORIOCSPOLLRATE, 2)) { @@ -542,7 +530,7 @@ test() } warnx("periodic read %u", i); - warnx("diff pressure: %d pa", (int)report.differential_pressure_pa); + warnx("diff pressure: %d pa", (int)report.differential_pressure_filtered_pa); warnx("temperature: %d C (0x%02x)", (int)report.temperature, (unsigned) report.temperature); } |