diff options
Diffstat (limited to 'src/drivers/mkblctrl/mkblctrl.cpp')
-rw-r--r-- | src/drivers/mkblctrl/mkblctrl.cpp | 166 |
1 files changed, 74 insertions, 92 deletions
diff --git a/src/drivers/mkblctrl/mkblctrl.cpp b/src/drivers/mkblctrl/mkblctrl.cpp index f3db4dd94..db53b2647 100644 --- a/src/drivers/mkblctrl/mkblctrl.cpp +++ b/src/drivers/mkblctrl/mkblctrl.cpp @@ -95,6 +95,8 @@ #define MOTOR_LOCATE_DELAY 10000000 #define ESC_UORB_PUBLISH_DELAY 500000 +#define CONTROL_INPUT_DROP_LIMIT_MS 20 + struct MotorData_t { unsigned int Version; // the version of the BL (0 = old) unsigned int SetPoint; // written by attitude controller @@ -141,57 +143,47 @@ public: unsigned int mk_check_for_blctrl(unsigned int count, bool showOutput, bool initI2C); private: - static const unsigned _max_actuators = MAX_MOTORS; - static const bool showDebug = false; - - int _update_rate; - int _task; - int _t_actuators; - int _t_actuator_armed; - unsigned int _motor; - int _px4mode; - int _frametype; - char _device[20]; ///< device - - orb_advert_t _t_outputs; - orb_advert_t _t_esc_status; - - unsigned int _num_outputs; - bool _primary_pwm_device; - bool _motortest; - bool _overrideSecurityChecks; - - volatile bool _task_should_exit; - bool _armed; - - unsigned long debugCounter; - - MixerGroup *_mixers; - - actuator_controls_s _controls; - - MotorData_t Motor[MAX_MOTORS]; - - static void task_main_trampoline(int argc, char *argv[]); - void task_main(); - - static int control_callback(uintptr_t handle, - uint8_t control_group, - uint8_t control_index, - float &input); - - int pwm_ioctl(file *filp, int cmd, unsigned long arg); - - - int mk_servo_arm(bool status); - int mk_servo_set(unsigned int chan, short val); - int mk_servo_test(unsigned int chan); - int mk_servo_locate(); - short scaling(float val, float inMin, float inMax, float outMin, float outMax); - - void play_beep(int count); - bool _indicate_esc; - param_t _param_indicate_esc; + static const unsigned _max_actuators = MAX_MOTORS; + static const bool showDebug = false; + + int _update_rate; + int _task; + int _t_actuators; + int _t_actuator_armed; + unsigned int _motor; + int _px4mode; + int _frametype; + char _device[20]; + orb_advert_t _t_outputs; + orb_advert_t _t_esc_status; + unsigned int _num_outputs; + bool _primary_pwm_device; + bool _motortest; + bool _overrideSecurityChecks; + volatile bool _task_should_exit; + bool _armed; + unsigned long debugCounter; + MixerGroup *_mixers; + bool _indicate_esc; + param_t _param_indicate_esc; + actuator_controls_s _controls; + MotorData_t Motor[MAX_MOTORS]; + + static void task_main_trampoline(int argc, char *argv[]); + void task_main(); + + static int control_callback(uintptr_t handle, + uint8_t control_group, + uint8_t control_index, + float &input); + + int pwm_ioctl(file *filp, int cmd, unsigned long arg); + int mk_servo_arm(bool status); + int mk_servo_set(unsigned int chan, short val); + int mk_servo_test(unsigned int chan); + int mk_servo_locate(); + short scaling(float val, float inMin, float inMax, float outMin, float outMax); + void play_beep(int count); }; @@ -202,13 +194,13 @@ const int blctrlAddr_quad_plus[] = { 2, 2, -2, -2, 0, 0, 0, 0 }; // Addresstrans const int blctrlAddr_hexa_plus[] = { 0, 2, 2, -2, 1, -3, 0, 0 }; // Addresstranslator for Hexa + configuration const int blctrlAddr_octo_plus[] = { 0, 3, -1, 0, 3, 0, 0, -5 }; // Addresstranslator for Octo + configuration -const int blctrlAddr_quad_x[] = { 2, 2, -2, -2, 0, 0, 0, 0 }; // Addresstranslator for Quad X configuration -const int blctrlAddr_hexa_x[] = { 2, 4, -2, 0, -3, -1, 0, 0 }; // Addresstranslator for Hexa X configuration -const int blctrlAddr_octo_x[] = { 1, 4, 0, 1, -4, 1, 1, -4 }; // Addresstranslator for Octo X configuration +const int blctrlAddr_quad_x[] = { 2, 2, -2, -2, 0, 0, 0, 0 }; // Addresstranslator for Quad X configuration +const int blctrlAddr_hexa_x[] = { 2, 4, -2, 0, -3, -1, 0, 0 }; // Addresstranslator for Hexa X configuration +const int blctrlAddr_octo_x[] = { 1, 4, 0, 1, -4, 1, 1, -4 }; // Addresstranslator for Octo X configuration -const int blctrlAddr_px4[] = { 0, 0, 0, 0, 0, 0, 0, 0}; +const int blctrlAddr_px4[] = { 0, 0, 0, 0, 0, 0, 0, 0}; // Native PX4 order - nothing to translate -int addrTranslator[] = {0, 0, 0, 0, 0, 0, 0, 0}; +int addrTranslator[] = {0, 0, 0, 0, 0, 0, 0, 0}; // work copy namespace { @@ -240,9 +232,7 @@ MK::MK(int bus, const char *_device_path) : strncpy(_device, _device_path, sizeof(_device)); /* enforce null termination */ _device[sizeof(_device) - 1] = '\0'; - _debug_enabled = true; - } MK::~MK() @@ -347,10 +337,10 @@ MK::set_motor_count(unsigned count) if (_px4mode == MAPPING_MK) { if (_frametype == FRAME_PLUS) { - fprintf(stderr, "[mkblctrl] addresstanslator for Mikrokopter addressing used. Frametype: +\n"); + fprintf(stderr, "[mkblctrl] Mikrokopter ESC addressing. Frame: +\n"); } else if (_frametype == FRAME_X) { - fprintf(stderr, "[mkblctrl] addresstanslator for Mikrokopter addressing used. Frametype: X\n"); + fprintf(stderr, "[mkblctrl] Mikrokopter ESC addressing. Frame: X\n"); } if (_num_outputs == 4) { @@ -379,18 +369,18 @@ MK::set_motor_count(unsigned count) } } else { - fprintf(stderr, "[mkblctrl] PX4 native addressing used.\n"); + fprintf(stderr, "[mkblctrl] PX4 ESC addressing.\n"); memcpy(&addrTranslator, &blctrlAddr_px4, sizeof(blctrlAddr_px4)); } if (_num_outputs == 4) { - fprintf(stderr, "[mkblctrl] Quadrocopter Mode (4)\n"); + fprintf(stderr, "[mkblctrl] 4 ESCs = Quadrocopter\n"); } else if (_num_outputs == 6) { - fprintf(stderr, "[mkblctrl] Hexacopter Mode (6)\n"); + fprintf(stderr, "[mkblctrl] 6 ESCs = Hexacopter\n"); } else if (_num_outputs == 8) { - fprintf(stderr, "[mkblctrl] Octocopter Mode (8)\n"); + fprintf(stderr, "[mkblctrl] 8 ESCs = Octocopter\n"); } return OK; @@ -453,21 +443,27 @@ MK::task_main() * Subscribe to the appropriate PWM output topic based on whether we are the * primary PWM output or not. */ - _t_actuators = orb_subscribe(ORB_ID(actuator_controls_0)); - orb_set_interval(_t_actuators, 20); /* default to 50Hz */ - + _t_actuators = orb_subscribe(ORB_ID(actuator_controls_0)); + orb_set_interval(_t_actuators, int(1000 / _update_rate)); /* set the topic update rate (200Hz)*/ + + /* + * Subscribe to actuator_armed topic. + */ _t_actuator_armed = orb_subscribe(ORB_ID(actuator_armed)); orb_set_interval(_t_actuator_armed, 200); /* 5Hz update rate */ - /* advertise the mixed control outputs */ + /* + * advertise the mixed control outputs. + */ actuator_outputs_s outputs; memset(&outputs, 0, sizeof(outputs)); - /* advertise the mixed control outputs */ int dummy; _t_outputs = orb_advertise_multi(ORB_ID(actuator_outputs), &outputs, &dummy, ORB_PRIO_HIGH); - /* advertise the blctrl status */ + /* + * advertise the blctrl status. + */ esc_status_s esc; memset(&esc, 0, sizeof(esc)); _t_esc_status = orb_advertise(ORB_ID(esc_status), &esc); @@ -479,9 +475,7 @@ MK::task_main() fds[1].fd = _t_actuator_armed; fds[1].events = POLLIN; - - orb_set_interval(_t_actuators, int(1000 / _update_rate)); - up_pwm_servo_set_rate(_update_rate); + up_pwm_servo_set_rate(_update_rate); /* unnecessary ? */ log("starting"); @@ -495,8 +489,8 @@ MK::task_main() _indicate_esc = false; } - /* sleep waiting for data max 100ms */ - int ret = ::poll(&fds[0], 2, 100); + /* waiting for data */ + int ret = ::poll(&fds[0], 2, CONTROL_INPUT_DROP_LIMIT_MS); /* this would be bad... */ if (ret < 0) { @@ -525,7 +519,6 @@ MK::task_main() /* iterate actuators */ for (unsigned int i = 0; i < _num_outputs; i++) { - /* last resort: catch NaN, INF and out-of-band errors */ if (i < outputs.noutputs && isfinite(outputs.output[i]) && @@ -552,11 +545,9 @@ MK::task_main() if (!_overrideSecurityChecks) { /* don't go under BLCTRL_MIN_VALUE */ - if (outputs.output[i] < BLCTRL_MIN_VALUE) { outputs.output[i] = BLCTRL_MIN_VALUE; } - } /* output to BLCtrl's */ @@ -564,13 +555,9 @@ MK::task_main() Motor[i].SetPoint_PX4 = outputs.output[i]; mk_servo_set(i, scaling(outputs.output[i], -1.0f, 1.0f, 0, 2047)); // scale the output to 0 - 2047 and sent to output routine } - } - } } - - } /* how about an arming update? */ @@ -584,8 +571,6 @@ MK::task_main() mk_servo_arm(aa.armed && !aa.lockdown); } - - /* * Only update esc topic every half second. */ @@ -608,7 +593,6 @@ MK::task_main() if (Motor[i].Version == 1) { // BLCtrl 2.0 (11Bit) esc.esc[i].esc_setpoint_raw = (uint16_t)(Motor[i].SetPoint << 3) | Motor[i].SetPointLowerBits; - } else { // BLCtrl < 2.0 (8Bit) esc.esc[i].esc_setpoint_raw = (uint16_t) Motor[i].SetPoint; @@ -618,7 +602,7 @@ MK::task_main() esc.esc[i].esc_state = (uint16_t) Motor[i].State; esc.esc[i].esc_errorcount = (uint16_t) 0; - // if motortest is requested - do it... + // if motortest is requested - do it... (deprecated in future) if (_motortest == true) { mk_servo_test(i); } @@ -627,7 +611,6 @@ MK::task_main() if (_indicate_esc == true) { mk_servo_locate(); } - } orb_publish(ORB_ID(esc_status), _t_esc_status, &esc); @@ -1237,7 +1220,7 @@ mkblctrl_main(int argc, char *argv[]) if (argc > i + 1) { if (strcmp(argv[i + 1], "+") == 0 || strcmp(argv[i + 1], "x") == 0 || strcmp(argv[i + 1], "X") == 0) { px4mode = MAPPING_MK; - newMode = true; + //newMode = true; if (strcmp(argv[i + 1], "+") == 0) { frametype = FRAME_PLUS; @@ -1259,26 +1242,25 @@ mkblctrl_main(int argc, char *argv[]) /* look for the optional test parameter */ if (strcmp(argv[i], "-t") == 0) { motortest = true; - newMode = true; + //newMode = true; } /* look for the optional -h --help parameter */ if (strcmp(argv[i], "-h") == 0 || strcmp(argv[i], "--help") == 0) { showHelp = true; - newMode = false; } /* look for the optional --override-security-checks parameter */ if (strcmp(argv[i], "--override-security-checks") == 0) { overrideSecurityChecks = true; - newMode = true; + //newMode = true; } /* look for the optional device parameter */ if (strcmp(argv[i], "-d") == 0 || strcmp(argv[i], "--device") == 0) { if (argc > i + 1) { devicepath = argv[i + 1]; - newMode = true; + //newMode = true; } else { errx(1, "missing the devicename (-d)"); |