diff options
Diffstat (limited to 'src/drivers/mkblctrl/mkblctrl.cpp')
| -rw-r--r-- | src/drivers/mkblctrl/mkblctrl.cpp | 56 |
1 files changed, 10 insertions, 46 deletions
diff --git a/src/drivers/mkblctrl/mkblctrl.cpp b/src/drivers/mkblctrl/mkblctrl.cpp index e78d96569..1bc3e97a4 100644 --- a/src/drivers/mkblctrl/mkblctrl.cpp +++ b/src/drivers/mkblctrl/mkblctrl.cpp @@ -59,10 +59,11 @@ #include <nuttx/arch.h> #include <nuttx/i2c.h> +#include <board_config.h> + #include <drivers/device/device.h> #include <drivers/drv_pwm_output.h> #include <drivers/drv_gpio.h> -#include <drivers/boards/px4fmu/px4fmu_internal.h> #include <drivers/drv_hrt.h> #include <drivers/drv_rc_input.h> @@ -74,6 +75,7 @@ #include <uORB/topics/actuator_controls.h> #include <uORB/topics/actuator_controls_effective.h> #include <uORB/topics/actuator_outputs.h> +#include <uORB/topics/actuator_armed.h> #include <uORB/topics/esc_status.h> #include <systemlib/err.h> @@ -134,7 +136,7 @@ private: int _current_update_rate; int _task; int _t_actuators; - int _t_armed; + int _t_actuator_armed; unsigned int _motor; int _px4mode; int _frametype; @@ -247,7 +249,7 @@ MK::MK(int bus) : _update_rate(50), _task(-1), _t_actuators(-1), - _t_armed(-1), + _t_actuator_armed(-1), _t_outputs(0), _t_actuators_effective(0), _t_esc_status(0), @@ -512,8 +514,8 @@ MK::task_main() /* force a reset of the update rate */ _current_update_rate = 0; - _t_armed = orb_subscribe(ORB_ID(actuator_armed)); - orb_set_interval(_t_armed, 200); /* 5Hz update rate */ + _t_actuator_armed = orb_subscribe(ORB_ID(actuator_armed)); + orb_set_interval(_t_actuator_armed, 200); /* 5Hz update rate */ /* advertise the mixed control outputs */ actuator_outputs_s outputs; @@ -539,7 +541,7 @@ MK::task_main() pollfd fds[2]; fds[0].fd = _t_actuators; fds[0].events = POLLIN; - fds[1].fd = _t_armed; + fds[1].fd = _t_actuator_armed; fds[1].events = POLLIN; log("starting"); @@ -653,7 +655,7 @@ MK::task_main() actuator_armed_s aa; /* get new value */ - orb_copy(ORB_ID(actuator_armed), _t_armed, &aa); + orb_copy(ORB_ID(actuator_armed), _t_actuator_armed, &aa); /* update PWM servo armed status if armed and not locked down */ mk_servo_arm(aa.armed && !aa.lockdown); @@ -699,7 +701,7 @@ MK::task_main() //::close(_t_esc_status); ::close(_t_actuators); ::close(_t_actuators_effective); - ::close(_t_armed); + ::close(_t_actuator_armed); /* make sure servos are off */ @@ -1345,44 +1347,6 @@ mk_new_mode(PortMode new_mode, int update_rate, int motorcount, bool motortest, gpio_bits = 0; servo_mode = MK::MODE_NONE; - switch (new_mode) { - case PORT_FULL_GPIO: - case PORT_MODE_UNSET: - /* nothing more to do here */ - break; - - case PORT_FULL_SERIAL: - /* set all multi-GPIOs to serial mode */ - gpio_bits = GPIO_MULTI_1 | GPIO_MULTI_2 | GPIO_MULTI_3 | GPIO_MULTI_4; - break; - - case PORT_FULL_PWM: - /* select 4-pin PWM mode */ - servo_mode = MK::MODE_4PWM; - break; - - case PORT_GPIO_AND_SERIAL: - /* set RX/TX multi-GPIOs to serial mode */ - gpio_bits = GPIO_MULTI_3 | GPIO_MULTI_4; - break; - - case PORT_PWM_AND_SERIAL: - /* select 2-pin PWM mode */ - servo_mode = MK::MODE_2PWM; - /* set RX/TX multi-GPIOs to serial mode */ - gpio_bits = GPIO_MULTI_3 | GPIO_MULTI_4; - break; - - case PORT_PWM_AND_GPIO: - /* select 2-pin PWM mode */ - servo_mode = MK::MODE_2PWM; - break; - } - - /* adjust GPIO config for serial mode(s) */ - if (gpio_bits != 0) - g_mk->ioctl(0, GPIO_SET_ALT_1, gpio_bits); - /* native PX4 addressing) */ g_mk->set_px4mode(px4mode); |