diff options
Diffstat (limited to 'src/drivers/mkblctrl/mkblctrl.cpp')
-rw-r--r-- | src/drivers/mkblctrl/mkblctrl.cpp | 79 |
1 files changed, 46 insertions, 33 deletions
diff --git a/src/drivers/mkblctrl/mkblctrl.cpp b/src/drivers/mkblctrl/mkblctrl.cpp index 0a41bfef4..30d6069b3 100644 --- a/src/drivers/mkblctrl/mkblctrl.cpp +++ b/src/drivers/mkblctrl/mkblctrl.cpp @@ -91,7 +91,7 @@ #define MOTOR_STATE_PRESENT_MASK 0x80 #define MOTOR_STATE_ERROR_MASK 0x7F #define MOTOR_SPINUP_COUNTER 30 -#define ESC_UORB_PUBLISH_DELAY 200 +#define ESC_UORB_PUBLISH_DELAY 500000 class MK : public device::I2C { @@ -661,7 +661,7 @@ MK::task_main() * Only update esc topic every half second. */ - if (hrt_absolute_time() - esc.timestamp > 500000) { + if (hrt_absolute_time() - esc.timestamp > ESC_UORB_PUBLISH_DELAY) { esc.counter++; esc.timestamp = hrt_absolute_time(); esc.esc_count = (uint8_t) _num_outputs; @@ -955,6 +955,7 @@ MK::mk_servo_test(unsigned int chan) if (_motor >= _num_outputs) { _motor = -1; _motortest = false; + fprintf(stderr, "[mkblctrl] Motortest finished...\n"); } } @@ -1557,41 +1558,53 @@ mkblctrl_main(int argc, char *argv[]) if (showHelp) { fprintf(stderr, "mkblctrl: help:\n"); - fprintf(stderr, " [-mkmode frame{+/x}] [-b i2c_bus_number] [-d devicename] [-t] [--override-security-checks] [-h / --help]\n\n"); - fprintf(stderr, "\t -mkmode frame {+/x} \t\t Type of frame, if Mikrokopter motor order is used.\n"); - fprintf(stderr, "\t -b i2c_bus_number \t\t Set the i2c bus where the ESCs are connected to (default 1).\n"); + fprintf(stderr, " [-mkmode {+/x}] [-b i2c_bus_number] [-d devicename] [--override-security-checks] [-h / --help]\n\n"); + fprintf(stderr, "\t -mkmode {+/x} \t\t Type of frame, if Mikrokopter motor order is used.\n"); + fprintf(stderr, "\t -b {i2c_bus_number} \t\t Set the i2c bus where the ESCs are connected to (default autoscan).\n"); fprintf(stderr, "\t -d {devicepath & name}\t\t Create alternate pwm device.\n"); - fprintf(stderr, "\t -t \t\t\t Spin up once every motor in order of motoraddress. (DANGER !!!)\n"); fprintf(stderr, "\t --override-security-checks \t\t Disable all security checks (arming and number of ESCs). Used to test single Motors etc. (DANGER !!!)\n"); + fprintf(stderr, "\n"); + fprintf(stderr, "Motortest:\n"); + fprintf(stderr, "First you have to start mkblctrl, the you can enter Motortest Mode with:\n"); + fprintf(stderr, "mkblctrl -t\n"); + fprintf(stderr, "This will spin up once every motor in order of motoraddress. (DANGER !!!)\n"); exit(1); } - if (bus == -1) { - bus = mk_check_for_i2c_esc_bus(devicepath, motorcount); - } - - if (bus != -1) { - if (g_mk == nullptr) { - if (mk_start(bus, motorcount, devicepath) != OK) { - errx(1, "failed to start the MK-BLCtrl driver"); - - } else { - //////newMode = true; - } - } - } else { - errx(1, "failed to start the MK-BLCtrl driver (cannot find i2c esc's)"); - - } - - /* parameter set ? */ - if (newMode) { - /* switch parameter */ - return mk_new_mode(port_mode, pwm_update_rate_in_hz, motorcount, motortest, px4mode, frametype, overrideSecurityChecks); - } - - /* test, etc. here g*/ - - exit(0); + if (!motortest) { + if (g_mk == nullptr) { + if (bus == -1) { + bus = mk_check_for_i2c_esc_bus(devicepath, motorcount); + } + + if (bus != -1) { + if (mk_start(bus, motorcount, devicepath) != OK) { + errx(1, "failed to start the MK-BLCtrl driver"); + } + } else { + errx(1, "failed to start the MK-BLCtrl driver (cannot find i2c esc's)"); + } + + /* parameter set ? */ + if (newMode) { + /* switch parameter */ + return mk_new_mode(port_mode, pwm_update_rate_in_hz, motorcount, motortest, px4mode, frametype, overrideSecurityChecks); + } + + exit(0); + } else { + errx(1, "MK-BLCtrl driver already running"); + } + + } else { + if (g_mk == nullptr) { + errx(1, "MK-BLCtrl driver not running. You have to start it first."); + + } else { + g_mk->set_motor_test(motortest); + exit(0); + + } + } } |