diff options
Diffstat (limited to 'src/drivers/mpu6000')
-rw-r--r-- | src/drivers/mpu6000/mpu6000.cpp | 660 |
1 files changed, 523 insertions, 137 deletions
diff --git a/src/drivers/mpu6000/mpu6000.cpp b/src/drivers/mpu6000/mpu6000.cpp index df1958186..ac75682c4 100644 --- a/src/drivers/mpu6000/mpu6000.cpp +++ b/src/drivers/mpu6000/mpu6000.cpp @@ -1,6 +1,6 @@ /**************************************************************************** * - * Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved. + * Copyright (c) 2012-2014 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -35,6 +35,9 @@ * @file mpu6000.cpp * * Driver for the Invensense MPU6000 connected via SPI. + * + * @author Andrew Tridgell + * @author Pat Hickey */ #include <nuttx/config.h> @@ -60,16 +63,21 @@ #include <nuttx/arch.h> #include <nuttx/clock.h> -#include <arch/board/board.h> +#include <board_config.h> #include <drivers/drv_hrt.h> #include <drivers/device/spi.h> +#include <drivers/device/ringbuffer.h> #include <drivers/drv_accel.h> #include <drivers/drv_gyro.h> +#include <mathlib/math/filter/LowPassFilter2p.hpp> #define DIR_READ 0x80 #define DIR_WRITE 0x00 +#define MPU_DEVICE_PATH_ACCEL "/dev/mpu6000_accel" +#define MPU_DEVICE_PATH_GYRO "/dev/mpu6000_gyro" + // MPU 6000 registers #define MPUREG_WHOAMI 0x75 #define MPUREG_SMPLRT_DIV 0x19 @@ -144,6 +152,25 @@ #define MPU6000_REV_D9 0x59 #define MPU6000_REV_D10 0x5A +#define MPU6000_ACCEL_DEFAULT_RANGE_G 8 +#define MPU6000_ACCEL_DEFAULT_RATE 1000 +#define MPU6000_ACCEL_DEFAULT_DRIVER_FILTER_FREQ 30 + +#define MPU6000_GYRO_DEFAULT_RANGE_G 8 +#define MPU6000_GYRO_DEFAULT_RATE 1000 +#define MPU6000_GYRO_DEFAULT_DRIVER_FILTER_FREQ 30 + +#define MPU6000_DEFAULT_ONCHIP_FILTER_FREQ 42 + +#define MPU6000_ONE_G 9.80665f + +/* + the MPU6000 can only handle high SPI bus speeds on the sensor and + interrupt status registers. All other registers have a maximum 1MHz + SPI speed + */ +#define MPU6000_LOW_BUS_SPEED 1000*1000 +#define MPU6000_HIGH_BUS_SPEED 11*1000*1000 /* will be rounded to 10.4 MHz, within margins for MPU6K */ class MPU6000_gyro; @@ -178,20 +205,32 @@ private: struct hrt_call _call; unsigned _call_interval; - struct accel_report _accel_report; + RingBuffer *_accel_reports; + struct accel_scale _accel_scale; float _accel_range_scale; float _accel_range_m_s2; orb_advert_t _accel_topic; + int _accel_class_instance; + + RingBuffer *_gyro_reports; - struct gyro_report _gyro_report; struct gyro_scale _gyro_scale; float _gyro_range_scale; float _gyro_range_rad_s; - orb_advert_t _gyro_topic; - unsigned _reads; + unsigned _sample_rate; + perf_counter_t _accel_reads; + perf_counter_t _gyro_reads; perf_counter_t _sample_perf; + perf_counter_t _bad_transfers; + + math::LowPassFilter2p _accel_filter_x; + math::LowPassFilter2p _accel_filter_y; + math::LowPassFilter2p _accel_filter_z; + math::LowPassFilter2p _gyro_filter_x; + math::LowPassFilter2p _gyro_filter_y; + math::LowPassFilter2p _gyro_filter_z; /** * Start automatic measurement. @@ -204,6 +243,13 @@ private: void stop(); /** + * Reset chip. + * + * Resets the chip and measurements ranges, but not scale and offset. + */ + void reset(); + + /** * Static trampoline from the hrt_call context; because we don't have a * generic hrt wrapper yet. * @@ -215,7 +261,7 @@ private: static void measure_trampoline(void *arg); /** - * Fetch measurements from the sensor and update the report ring. + * Fetch measurements from the sensor and update the report buffers. */ void measure(); @@ -261,17 +307,36 @@ private: uint16_t swap16(uint16_t val) { return (val >> 8) | (val << 8); } /** - * Self test + * Measurement self test * * @return 0 on success, 1 on failure */ int self_test(); + /** + * Accel self test + * + * @return 0 on success, 1 on failure + */ + int accel_self_test(); + + /** + * Gyro self test + * + * @return 0 on success, 1 on failure + */ + int gyro_self_test(); + /* set low pass filter frequency */ void _set_dlpf_filter(uint16_t frequency_hz); + /* + set sample rate (approximate) - 1kHz to 5Hz + */ + void _set_sample_rate(uint16_t desired_sample_rate_hz); + }; /** @@ -286,30 +351,47 @@ public: virtual ssize_t read(struct file *filp, char *buffer, size_t buflen); virtual int ioctl(struct file *filp, int cmd, unsigned long arg); + virtual int init(); + protected: friend class MPU6000; void parent_poll_notify(); + private: MPU6000 *_parent; + orb_advert_t _gyro_topic; + int _gyro_class_instance; + }; /** driver 'main' command */ extern "C" { __EXPORT int mpu6000_main(int argc, char *argv[]); } MPU6000::MPU6000(int bus, spi_dev_e device) : - SPI("MPU6000", ACCEL_DEVICE_PATH, bus, device, SPIDEV_MODE3, 10000000), + SPI("MPU6000", MPU_DEVICE_PATH_ACCEL, bus, device, SPIDEV_MODE3, MPU6000_LOW_BUS_SPEED), _gyro(new MPU6000_gyro(this)), _product(0), _call_interval(0), + _accel_reports(nullptr), _accel_range_scale(0.0f), _accel_range_m_s2(0.0f), _accel_topic(-1), + _accel_class_instance(-1), + _gyro_reports(nullptr), _gyro_range_scale(0.0f), _gyro_range_rad_s(0.0f), - _gyro_topic(-1), - _reads(0), - _sample_perf(perf_alloc(PC_ELAPSED, "mpu6000_read")) + _sample_rate(1000), + _accel_reads(perf_alloc(PC_COUNT, "mpu6000_accel_read")), + _gyro_reads(perf_alloc(PC_COUNT, "mpu6000_gyro_read")), + _sample_perf(perf_alloc(PC_ELAPSED, "mpu6000_read")), + _bad_transfers(perf_alloc(PC_COUNT, "mpu6000_bad_transfers")), + _accel_filter_x(MPU6000_ACCEL_DEFAULT_RATE, MPU6000_ACCEL_DEFAULT_DRIVER_FILTER_FREQ), + _accel_filter_y(MPU6000_ACCEL_DEFAULT_RATE, MPU6000_ACCEL_DEFAULT_DRIVER_FILTER_FREQ), + _accel_filter_z(MPU6000_ACCEL_DEFAULT_RATE, MPU6000_ACCEL_DEFAULT_DRIVER_FILTER_FREQ), + _gyro_filter_x(MPU6000_GYRO_DEFAULT_RATE, MPU6000_GYRO_DEFAULT_DRIVER_FILTER_FREQ), + _gyro_filter_y(MPU6000_GYRO_DEFAULT_RATE, MPU6000_GYRO_DEFAULT_DRIVER_FILTER_FREQ), + _gyro_filter_z(MPU6000_GYRO_DEFAULT_RATE, MPU6000_GYRO_DEFAULT_DRIVER_FILTER_FREQ) { // disable debug() calls _debug_enabled = false; @@ -330,8 +412,6 @@ MPU6000::MPU6000(int bus, spi_dev_e device) : _gyro_scale.z_offset = 0; _gyro_scale.z_scale = 1.0f; - memset(&_accel_report, 0, sizeof(_accel_report)); - memset(&_gyro_report, 0, sizeof(_gyro_report)); memset(&_call, 0, sizeof(_call)); } @@ -343,8 +423,20 @@ MPU6000::~MPU6000() /* delete the gyro subdriver */ delete _gyro; + /* free any existing reports */ + if (_accel_reports != nullptr) + delete _accel_reports; + if (_gyro_reports != nullptr) + delete _gyro_reports; + + if (_accel_class_instance != -1) + unregister_class_devname(ACCEL_DEVICE_PATH, _accel_class_instance); + /* delete the perf counter */ perf_free(_sample_perf); + perf_free(_accel_reads); + perf_free(_gyro_reads); + perf_free(_bad_transfers); } int @@ -361,30 +453,107 @@ MPU6000::init() return ret; } - /* advertise sensor topics */ - _accel_topic = orb_advertise(ORB_ID(sensor_accel), &_accel_report); - _gyro_topic = orb_advertise(ORB_ID(sensor_gyro), &_gyro_report); + /* allocate basic report buffers */ + _accel_reports = new RingBuffer(2, sizeof(accel_report)); + if (_accel_reports == nullptr) + goto out; + + _gyro_reports = new RingBuffer(2, sizeof(gyro_report)); + if (_gyro_reports == nullptr) + goto out; + + reset(); + + /* Initialize offsets and scales */ + _accel_scale.x_offset = 0; + _accel_scale.x_scale = 1.0f; + _accel_scale.y_offset = 0; + _accel_scale.y_scale = 1.0f; + _accel_scale.z_offset = 0; + _accel_scale.z_scale = 1.0f; + + _gyro_scale.x_offset = 0; + _gyro_scale.x_scale = 1.0f; + _gyro_scale.y_offset = 0; + _gyro_scale.y_scale = 1.0f; + _gyro_scale.z_offset = 0; + _gyro_scale.z_scale = 1.0f; + + /* do CDev init for the gyro device node, keep it optional */ + ret = _gyro->init(); + /* if probe/setup failed, bail now */ + if (ret != OK) { + debug("gyro init failed"); + return ret; + } + + _accel_class_instance = register_class_devname(ACCEL_DEVICE_PATH); + + measure(); + + if (_accel_class_instance == CLASS_DEVICE_PRIMARY) { + + /* advertise sensor topic, measure manually to initialize valid report */ + struct accel_report arp; + _accel_reports->get(&arp); + + /* measurement will have generated a report, publish */ + _accel_topic = orb_advertise(ORB_ID(sensor_accel), &arp); + + if (_accel_topic < 0) + debug("failed to create sensor_accel publication"); + + } + + if (_gyro->_gyro_class_instance == CLASS_DEVICE_PRIMARY) { + + /* advertise sensor topic, measure manually to initialize valid report */ + struct gyro_report grp; + _gyro_reports->get(&grp); + + _gyro->_gyro_topic = orb_advertise(ORB_ID(sensor_gyro), &grp); + + if (_gyro->_gyro_topic < 0) + debug("failed to create sensor_gyro publication"); + + } + +out: + return ret; +} + +void MPU6000::reset() +{ + // if the mpu6000 is initialised after the l3gd20 and lsm303d + // then if we don't do an irqsave/irqrestore here the mpu6000 + // frequenctly comes up in a bad state where all transfers + // come as zero + irqstate_t state; + state = irqsave(); - // Chip reset write_reg(MPUREG_PWR_MGMT_1, BIT_H_RESET); up_udelay(10000); - // Wake up device and select GyroZ clock (better performance) + // Wake up device and select GyroZ clock. Note that the + // MPU6000 starts up in sleep mode, and it can take some time + // for it to come out of sleep write_reg(MPUREG_PWR_MGMT_1, MPU_CLK_SEL_PLLGYROZ); up_udelay(1000); // Disable I2C bus (recommended on datasheet) write_reg(MPUREG_USER_CTRL, BIT_I2C_IF_DIS); + irqrestore(state); + up_udelay(1000); // SAMPLE RATE - write_reg(MPUREG_SMPLRT_DIV, 0x04); // Sample rate = 200Hz Fsample= 1Khz/(4+1) = 200Hz + _set_sample_rate(_sample_rate); usleep(1000); // FS & DLPF FS=2000 deg/s, DLPF = 20Hz (low pass filter) // was 90 Hz, but this ruins quality and does not improve the // system response - _set_dlpf_filter(20); + _set_dlpf_filter(MPU6000_DEFAULT_ONCHIP_FILTER_FREQ); usleep(1000); // Gyro scale 2000 deg/s () write_reg(MPUREG_GYRO_CONFIG, BITS_FS_2000DPS); @@ -395,12 +564,6 @@ MPU6000::init() // 2000 deg/s = (2000/180)*PI = 34.906585 rad/s // scaling factor: // 1/(2^15)*(2000/180)*PI - _gyro_scale.x_offset = 0; - _gyro_scale.x_scale = 1.0f; - _gyro_scale.y_offset = 0; - _gyro_scale.y_scale = 1.0f; - _gyro_scale.z_offset = 0; - _gyro_scale.z_scale = 1.0f; _gyro_range_scale = (0.0174532 / 16.4);//1.0f / (32768.0f * (2000.0f / 180.0f) * M_PI_F); _gyro_range_rad_s = (2000.0f / 180.0f) * M_PI_F; @@ -433,14 +596,8 @@ MPU6000::init() // Correct accel scale factors of 4096 LSB/g // scale to m/s^2 ( 1g = 9.81 m/s^2) - _accel_scale.x_offset = 0; - _accel_scale.x_scale = 1.0f; - _accel_scale.y_offset = 0; - _accel_scale.y_scale = 1.0f; - _accel_scale.z_offset = 0; - _accel_scale.z_scale = 1.0f; - _accel_range_scale = (9.81f / 4096.0f); - _accel_range_m_s2 = 8.0f * 9.81f; + _accel_range_scale = (MPU6000_ONE_G / 4096.0f); + _accel_range_m_s2 = 8.0f * MPU6000_ONE_G; usleep(1000); @@ -454,14 +611,6 @@ MPU6000::init() // write_reg(MPUREG_PWR_MGMT_1,MPU_CLK_SEL_PLLGYROZ); usleep(1000); - /* do CDev init for the gyro device node, keep it optional */ - int gyro_ret = _gyro->init(); - - if (gyro_ret != OK) { - _gyro_topic = -1; - } - - return ret; } int @@ -494,6 +643,19 @@ MPU6000::probe() } /* + set sample rate (approximate) - 1kHz to 5Hz, for both accel and gyro +*/ +void +MPU6000::_set_sample_rate(uint16_t desired_sample_rate_hz) +{ + uint8_t div = 1000 / desired_sample_rate_hz; + if(div>200) div=200; + if(div<1) div=1; + write_reg(MPUREG_SMPLRT_DIV, div-1); + _sample_rate = 1000 / div; +} + +/* set the DLPF filter frequency. This affects both accel and gyro. */ void @@ -527,52 +689,132 @@ MPU6000::_set_dlpf_filter(uint16_t frequency_hz) ssize_t MPU6000::read(struct file *filp, char *buffer, size_t buflen) { - int ret = 0; + unsigned count = buflen / sizeof(accel_report); /* buffer must be large enough */ - if (buflen < sizeof(_accel_report)) + if (count < 1) return -ENOSPC; - /* if automatic measurement is not enabled */ - if (_call_interval == 0) + /* if automatic measurement is not enabled, get a fresh measurement into the buffer */ + if (_call_interval == 0) { + _accel_reports->flush(); measure(); + } - /* copy out the latest reports */ - memcpy(buffer, &_accel_report, sizeof(_accel_report)); - ret = sizeof(_accel_report); + /* if no data, error (we could block here) */ + if (_accel_reports->empty()) + return -EAGAIN; - return ret; + perf_count(_accel_reads); + + /* copy reports out of our buffer to the caller */ + accel_report *arp = reinterpret_cast<accel_report *>(buffer); + int transferred = 0; + while (count--) { + if (!_accel_reports->get(arp)) + break; + transferred++; + arp++; + } + + /* return the number of bytes transferred */ + return (transferred * sizeof(accel_report)); } int MPU6000::self_test() { - if (_reads == 0) { + if (perf_event_count(_sample_perf) == 0) { measure(); } /* return 0 on success, 1 else */ - return (_reads > 0) ? 0 : 1; + return (perf_event_count(_sample_perf) > 0) ? 0 : 1; +} + +int +MPU6000::accel_self_test() +{ + if (self_test()) + return 1; + + /* inspect accel offsets */ + if (fabsf(_accel_scale.x_offset) < 0.000001f) + return 1; + if (fabsf(_accel_scale.x_scale - 1.0f) > 0.4f || fabsf(_accel_scale.x_scale - 1.0f) < 0.000001f) + return 1; + + if (fabsf(_accel_scale.y_offset) < 0.000001f) + return 1; + if (fabsf(_accel_scale.y_scale - 1.0f) > 0.4f || fabsf(_accel_scale.y_scale - 1.0f) < 0.000001f) + return 1; + + if (fabsf(_accel_scale.z_offset) < 0.000001f) + return 1; + if (fabsf(_accel_scale.z_scale - 1.0f) > 0.4f || fabsf(_accel_scale.z_scale - 1.0f) < 0.000001f) + return 1; + + return 0; +} + +int +MPU6000::gyro_self_test() +{ + if (self_test()) + return 1; + + /* evaluate gyro offsets, complain if offset -> zero or larger than 6 dps */ + if (fabsf(_gyro_scale.x_offset) > 0.1f || fabsf(_gyro_scale.x_offset) < 0.000001f) + return 1; + if (fabsf(_gyro_scale.x_scale - 1.0f) > 0.3f) + return 1; + + if (fabsf(_gyro_scale.y_offset) > 0.1f || fabsf(_gyro_scale.y_offset) < 0.000001f) + return 1; + if (fabsf(_gyro_scale.y_scale - 1.0f) > 0.3f) + return 1; + + if (fabsf(_gyro_scale.z_offset) > 0.1f || fabsf(_gyro_scale.z_offset) < 0.000001f) + return 1; + if (fabsf(_gyro_scale.z_scale - 1.0f) > 0.3f) + return 1; + + return 0; } ssize_t MPU6000::gyro_read(struct file *filp, char *buffer, size_t buflen) { - int ret = 0; + unsigned count = buflen / sizeof(gyro_report); /* buffer must be large enough */ - if (buflen < sizeof(_gyro_report)) + if (count < 1) return -ENOSPC; - /* if automatic measurement is not enabled */ - if (_call_interval == 0) + /* if automatic measurement is not enabled, get a fresh measurement into the buffer */ + if (_call_interval == 0) { + _gyro_reports->flush(); measure(); + } - /* copy out the latest report */ - memcpy(buffer, &_gyro_report, sizeof(_gyro_report)); - ret = sizeof(_gyro_report); + /* if no data, error (we could block here) */ + if (_gyro_reports->empty()) + return -EAGAIN; - return ret; + perf_count(_gyro_reads); + + /* copy reports out of our buffer to the caller */ + gyro_report *grp = reinterpret_cast<gyro_report *>(buffer); + int transferred = 0; + while (count--) { + if (!_gyro_reports->get(grp)) + break; + transferred++; + grp++; + } + + /* return the number of bytes transferred */ + return (transferred * sizeof(gyro_report)); } int @@ -580,6 +822,10 @@ MPU6000::ioctl(struct file *filp, int cmd, unsigned long arg) { switch (cmd) { + case SENSORIOCRESET: + reset(); + return OK; + case SENSORIOCSPOLLRATE: { switch (arg) { @@ -598,9 +844,10 @@ MPU6000::ioctl(struct file *filp, int cmd, unsigned long arg) /* set default/max polling rate */ case SENSOR_POLLRATE_MAX: + return ioctl(filp, SENSORIOCSPOLLRATE, 1000); + case SENSOR_POLLRATE_DEFAULT: - /* XXX 500Hz is just a wild guess */ - return ioctl(filp, SENSORIOCSPOLLRATE, 500); + return ioctl(filp, SENSORIOCSPOLLRATE, MPU6000_ACCEL_DEFAULT_RATE); /* adjust to a legal polling interval in Hz */ default: { @@ -614,6 +861,19 @@ MPU6000::ioctl(struct file *filp, int cmd, unsigned long arg) if (ticks < 1000) return -EINVAL; + // adjust filters + float cutoff_freq_hz = _accel_filter_x.get_cutoff_freq(); + float sample_rate = 1.0e6f/ticks; + _accel_filter_x.set_cutoff_frequency(sample_rate, cutoff_freq_hz); + _accel_filter_y.set_cutoff_frequency(sample_rate, cutoff_freq_hz); + _accel_filter_z.set_cutoff_frequency(sample_rate, cutoff_freq_hz); + + + float cutoff_freq_hz_gyro = _gyro_filter_x.get_cutoff_freq(); + _gyro_filter_x.set_cutoff_frequency(sample_rate, cutoff_freq_hz_gyro); + _gyro_filter_y.set_cutoff_frequency(sample_rate, cutoff_freq_hz_gyro); + _gyro_filter_z.set_cutoff_frequency(sample_rate, cutoff_freq_hz_gyro); + /* update interval for next measurement */ /* XXX this is a bit shady, but no other way to adjust... */ _call.period = _call_interval = ticks; @@ -633,23 +893,42 @@ MPU6000::ioctl(struct file *filp, int cmd, unsigned long arg) return 1000000 / _call_interval; - case SENSORIOCSQUEUEDEPTH: - /* XXX not implemented */ - return -EINVAL; + case SENSORIOCSQUEUEDEPTH: { + /* lower bound is mandatory, upper bound is a sanity check */ + if ((arg < 1) || (arg > 100)) + return -EINVAL; + + irqstate_t flags = irqsave(); + if (!_accel_reports->resize(arg)) { + irqrestore(flags); + return -ENOMEM; + } + irqrestore(flags); + + return OK; + } case SENSORIOCGQUEUEDEPTH: - /* XXX not implemented */ - return -EINVAL; + return _accel_reports->size(); + case ACCELIOCGSAMPLERATE: + return _sample_rate; case ACCELIOCSSAMPLERATE: - case ACCELIOCGSAMPLERATE: - /* XXX not implemented */ - return -EINVAL; + _set_sample_rate(arg); + return OK; - case ACCELIOCSLOWPASS: case ACCELIOCGLOWPASS: - _set_dlpf_filter((uint16_t)arg); + return _accel_filter_x.get_cutoff_freq(); + + case ACCELIOCSLOWPASS: + + // XXX decide on relationship of both filters + // i.e. disable the on-chip filter + //_set_dlpf_filter((uint16_t)arg); + _accel_filter_x.set_cutoff_frequency(1.0e6f / _call_interval, arg); + _accel_filter_y.set_cutoff_frequency(1.0e6f / _call_interval, arg); + _accel_filter_z.set_cutoff_frequency(1.0e6f / _call_interval, arg); return OK; case ACCELIOCSSCALE: @@ -671,15 +950,16 @@ MPU6000::ioctl(struct file *filp, int cmd, unsigned long arg) return OK; case ACCELIOCSRANGE: - case ACCELIOCGRANGE: /* XXX not implemented */ // XXX change these two values on set: // _accel_range_scale = (9.81f / 4096.0f); - // _accel_range_rad_s = 8.0f * 9.81f; + // _accel_range_m_s2 = 8.0f * 9.81f; return -EINVAL; + case ACCELIOCGRANGE: + return (unsigned long)((_accel_range_m_s2)/MPU6000_ONE_G + 0.5f); case ACCELIOCSELFTEST: - return self_test(); + return accel_self_test(); default: /* give it to the superclass */ @@ -695,19 +975,42 @@ MPU6000::gyro_ioctl(struct file *filp, int cmd, unsigned long arg) /* these are shared with the accel side */ case SENSORIOCSPOLLRATE: case SENSORIOCGPOLLRATE: - case SENSORIOCSQUEUEDEPTH: - case SENSORIOCGQUEUEDEPTH: case SENSORIOCRESET: return ioctl(filp, cmd, arg); - case GYROIOCSSAMPLERATE: + case SENSORIOCSQUEUEDEPTH: { + /* lower bound is mandatory, upper bound is a sanity check */ + if ((arg < 1) || (arg > 100)) + return -EINVAL; + + irqstate_t flags = irqsave(); + if (!_gyro_reports->resize(arg)) { + irqrestore(flags); + return -ENOMEM; + } + irqrestore(flags); + + return OK; + } + + case SENSORIOCGQUEUEDEPTH: + return _gyro_reports->size(); + case GYROIOCGSAMPLERATE: - /* XXX not implemented */ - return -EINVAL; + return _sample_rate; + + case GYROIOCSSAMPLERATE: + _set_sample_rate(arg); + return OK; - case GYROIOCSLOWPASS: case GYROIOCGLOWPASS: - _set_dlpf_filter((uint16_t)arg); + return _gyro_filter_x.get_cutoff_freq(); + case GYROIOCSLOWPASS: + _gyro_filter_x.set_cutoff_frequency(1.0e6f / _call_interval, arg); + _gyro_filter_y.set_cutoff_frequency(1.0e6f / _call_interval, arg); + _gyro_filter_z.set_cutoff_frequency(1.0e6f / _call_interval, arg); + // XXX check relation to the internal lowpass + //_set_dlpf_filter((uint16_t)arg); return OK; case GYROIOCSSCALE: @@ -721,15 +1024,16 @@ MPU6000::gyro_ioctl(struct file *filp, int cmd, unsigned long arg) return OK; case GYROIOCSRANGE: - case GYROIOCGRANGE: /* XXX not implemented */ // XXX change these two values on set: // _gyro_range_scale = xx - // _gyro_range_m_s2 = xx + // _gyro_range_rad_s = xx return -EINVAL; + case GYROIOCGRANGE: + return (unsigned long)(_gyro_range_rad_s * 180.0f / M_PI_F + 0.5f); case GYROIOCSELFTEST: - return self_test(); + return gyro_self_test(); default: /* give it to the superclass */ @@ -740,9 +1044,10 @@ MPU6000::gyro_ioctl(struct file *filp, int cmd, unsigned long arg) uint8_t MPU6000::read_reg(unsigned reg) { - uint8_t cmd[2]; + uint8_t cmd[2] = { (uint8_t)(reg | DIR_READ), 0}; - cmd[0] = reg | DIR_READ; + // general register transfer at low clock speed + set_frequency(MPU6000_LOW_BUS_SPEED); transfer(cmd, cmd, sizeof(cmd)); @@ -752,9 +1057,10 @@ MPU6000::read_reg(unsigned reg) uint16_t MPU6000::read_reg16(unsigned reg) { - uint8_t cmd[3]; + uint8_t cmd[3] = { (uint8_t)(reg | DIR_READ), 0, 0 }; - cmd[0] = reg | DIR_READ; + // general register transfer at low clock speed + set_frequency(MPU6000_LOW_BUS_SPEED); transfer(cmd, cmd, sizeof(cmd)); @@ -769,6 +1075,9 @@ MPU6000::write_reg(unsigned reg, uint8_t value) cmd[0] = reg | DIR_WRITE; cmd[1] = value; + // general register transfer at low clock speed + set_frequency(MPU6000_LOW_BUS_SPEED); + transfer(cmd, nullptr, sizeof(cmd)); } @@ -831,6 +1140,10 @@ MPU6000::start() /* make sure we are stopped first */ stop(); + /* discard any stale data in the buffers */ + _accel_reports->flush(); + _gyro_reports->flush(); + /* start polling at the specified rate */ hrt_call_every(&_call, 1000, _call_interval, (hrt_callout)&MPU6000::measure_trampoline, this); } @@ -844,7 +1157,7 @@ MPU6000::stop() void MPU6000::measure_trampoline(void *arg) { - MPU6000 *dev = (MPU6000 *)arg; + MPU6000 *dev = reinterpret_cast<MPU6000 *>(arg); /* make another measurement */ dev->measure(); @@ -888,12 +1201,13 @@ MPU6000::measure() * Fetch the full set of measurements from the MPU6000 in one pass. */ mpu_report.cmd = DIR_READ | MPUREG_INT_STATUS; + + // sensor transfer at high clock speed + set_frequency(MPU6000_HIGH_BUS_SPEED); + if (OK != transfer((uint8_t *)&mpu_report, ((uint8_t *)&mpu_report), sizeof(mpu_report))) return; - /* count measurement */ - _reads++; - /* * Convert from big to little endian */ @@ -908,6 +1222,20 @@ MPU6000::measure() report.gyro_y = int16_t_from_bytes(mpu_report.gyro_y); report.gyro_z = int16_t_from_bytes(mpu_report.gyro_z); + if (report.accel_x == 0 && + report.accel_y == 0 && + report.accel_z == 0 && + report.temp == 0 && + report.gyro_x == 0 && + report.gyro_y == 0 && + report.gyro_z == 0) { + // all zero data - probably a SPI bus error + perf_count(_bad_transfers); + perf_end(_sample_perf); + return; + } + + /* * Swap axes and negate y */ @@ -926,10 +1254,16 @@ MPU6000::measure() report.gyro_y = gyro_yt; /* - * Adjust and scale results to m/s^2. + * Report buffers. */ - _gyro_report.timestamp = _accel_report.timestamp = hrt_absolute_time(); + accel_report arb; + gyro_report grb; + /* + * Adjust and scale results to m/s^2. + */ + grb.timestamp = arb.timestamp = hrt_absolute_time(); + grb.error_count = arb.error_count = 0; // not reported /* * 1) Scale raw value to SI units using scaling from datasheet. @@ -949,40 +1283,57 @@ MPU6000::measure() /* NOTE: Axes have been swapped to match the board a few lines above. */ - _accel_report.x_raw = report.accel_x; - _accel_report.y_raw = report.accel_y; - _accel_report.z_raw = report.accel_z; + arb.x_raw = report.accel_x; + arb.y_raw = report.accel_y; + arb.z_raw = report.accel_z; - _accel_report.x = ((report.accel_x * _accel_range_scale) - _accel_scale.x_offset) * _accel_scale.x_scale; - _accel_report.y = ((report.accel_y * _accel_range_scale) - _accel_scale.y_offset) * _accel_scale.y_scale; - _accel_report.z = ((report.accel_z * _accel_range_scale) - _accel_scale.z_offset) * _accel_scale.z_scale; - _accel_report.scaling = _accel_range_scale; - _accel_report.range_m_s2 = _accel_range_m_s2; + float x_in_new = ((report.accel_x * _accel_range_scale) - _accel_scale.x_offset) * _accel_scale.x_scale; + float y_in_new = ((report.accel_y * _accel_range_scale) - _accel_scale.y_offset) * _accel_scale.y_scale; + float z_in_new = ((report.accel_z * _accel_range_scale) - _accel_scale.z_offset) * _accel_scale.z_scale; + + arb.x = _accel_filter_x.apply(x_in_new); + arb.y = _accel_filter_y.apply(y_in_new); + arb.z = _accel_filter_z.apply(z_in_new); - _accel_report.temperature_raw = report.temp; - _accel_report.temperature = (report.temp) / 361.0f + 35.0f; + arb.scaling = _accel_range_scale; + arb.range_m_s2 = _accel_range_m_s2; - _gyro_report.x_raw = report.gyro_x; - _gyro_report.y_raw = report.gyro_y; - _gyro_report.z_raw = report.gyro_z; + arb.temperature_raw = report.temp; + arb.temperature = (report.temp) / 361.0f + 35.0f; - _gyro_report.x = ((report.gyro_x * _gyro_range_scale) - _gyro_scale.x_offset) * _gyro_scale.x_scale; - _gyro_report.y = ((report.gyro_y * _gyro_range_scale) - _gyro_scale.y_offset) * _gyro_scale.y_scale; - _gyro_report.z = ((report.gyro_z * _gyro_range_scale) - _gyro_scale.z_offset) * _gyro_scale.z_scale; - _gyro_report.scaling = _gyro_range_scale; - _gyro_report.range_rad_s = _gyro_range_rad_s; + grb.x_raw = report.gyro_x; + grb.y_raw = report.gyro_y; + grb.z_raw = report.gyro_z; - _gyro_report.temperature_raw = report.temp; - _gyro_report.temperature = (report.temp) / 361.0f + 35.0f; + float x_gyro_in_new = ((report.gyro_x * _gyro_range_scale) - _gyro_scale.x_offset) * _gyro_scale.x_scale; + float y_gyro_in_new = ((report.gyro_y * _gyro_range_scale) - _gyro_scale.y_offset) * _gyro_scale.y_scale; + float z_gyro_in_new = ((report.gyro_z * _gyro_range_scale) - _gyro_scale.z_offset) * _gyro_scale.z_scale; + + grb.x = _gyro_filter_x.apply(x_gyro_in_new); + grb.y = _gyro_filter_y.apply(y_gyro_in_new); + grb.z = _gyro_filter_z.apply(z_gyro_in_new); + + grb.scaling = _gyro_range_scale; + grb.range_rad_s = _gyro_range_rad_s; + + grb.temperature_raw = report.temp; + grb.temperature = (report.temp) / 361.0f + 35.0f; + + _accel_reports->force(&arb); + _gyro_reports->force(&grb); /* notify anyone waiting for data */ poll_notify(POLLIN); _gyro->parent_poll_notify(); - /* and publish for subscribers */ - orb_publish(ORB_ID(sensor_accel), _accel_topic, &_accel_report); - if (_gyro_topic != -1) { - orb_publish(ORB_ID(sensor_gyro), _gyro_topic, &_gyro_report); + if (_accel_topic > 0 && !(_pub_blocked)) { + /* publish it */ + orb_publish(ORB_ID(sensor_accel), _accel_topic, &arb); + } + + if (_gyro->_gyro_topic > 0 && !(_pub_blocked)) { + /* publish it */ + orb_publish(ORB_ID(sensor_gyro), _gyro->_gyro_topic, &grb); } /* stop measuring */ @@ -992,17 +1343,45 @@ MPU6000::measure() void MPU6000::print_info() { - printf("reads: %u\n", _reads); + perf_print_counter(_sample_perf); + perf_print_counter(_accel_reads); + perf_print_counter(_gyro_reads); + _accel_reports->print_info("accel queue"); + _gyro_reports->print_info("gyro queue"); } MPU6000_gyro::MPU6000_gyro(MPU6000 *parent) : - CDev("MPU6000_gyro", GYRO_DEVICE_PATH), - _parent(parent) + CDev("MPU6000_gyro", MPU_DEVICE_PATH_GYRO), + _parent(parent), + _gyro_topic(-1), + _gyro_class_instance(-1) { } MPU6000_gyro::~MPU6000_gyro() { + if (_gyro_class_instance != -1) + unregister_class_devname(GYRO_DEVICE_PATH, _gyro_class_instance); +} + +int +MPU6000_gyro::init() +{ + int ret; + + // do base class init + ret = CDev::init(); + + /* if probe/setup failed, bail now */ + if (ret != OK) { + debug("gyro init failed"); + return ret; + } + + _gyro_class_instance = register_class_devname(GYRO_DEVICE_PATH); + +out: + return ret; } void @@ -1045,7 +1424,8 @@ start() int fd; if (g_dev != nullptr) - errx(1, "already started"); + /* if already started, the still command succeeded */ + errx(0, "already started"); /* create the driver */ g_dev = new MPU6000(1 /* XXX magic number */, (spi_dev_e)PX4_SPIDEV_MPU); @@ -1057,7 +1437,7 @@ start() goto fail; /* set the poll rate to default, starts automatic data collection */ - fd = open(ACCEL_DEVICE_PATH, O_RDONLY); + fd = open(MPU_DEVICE_PATH_ACCEL, O_RDONLY); if (fd < 0) goto fail; @@ -1065,6 +1445,8 @@ start() if (ioctl(fd, SENSORIOCSPOLLRATE, SENSOR_POLLRATE_DEFAULT) < 0) goto fail; + close(fd); + exit(0); fail: @@ -1084,24 +1466,22 @@ fail: void test() { - int fd = -1; - int fd_gyro = -1; - struct accel_report a_report; - struct gyro_report g_report; + accel_report a_report; + gyro_report g_report; ssize_t sz; /* get the driver */ - fd = open(ACCEL_DEVICE_PATH, O_RDONLY); + int fd = open(MPU_DEVICE_PATH_ACCEL, O_RDONLY); if (fd < 0) err(1, "%s open failed (try 'mpu6000 start' if the driver is not running)", - ACCEL_DEVICE_PATH); + MPU_DEVICE_PATH_ACCEL); /* get the driver */ - fd_gyro = open(GYRO_DEVICE_PATH, O_RDONLY); + int fd_gyro = open(MPU_DEVICE_PATH_GYRO, O_RDONLY); if (fd_gyro < 0) - err(1, "%s open failed", GYRO_DEVICE_PATH); + err(1, "%s open failed", MPU_DEVICE_PATH_GYRO); /* reset to manual polling */ if (ioctl(fd, SENSORIOCSPOLLRATE, SENSOR_POLLRATE_MANUAL) < 0) @@ -1110,8 +1490,10 @@ test() /* do a simple demand read */ sz = read(fd, &a_report, sizeof(a_report)); - if (sz != sizeof(a_report)) + if (sz != sizeof(a_report)) { + warnx("ret: %d, expected: %d", sz, sizeof(a_report)); err(1, "immediate acc read failed"); + } warnx("single read"); warnx("time: %lld", a_report.timestamp); @@ -1122,13 +1504,15 @@ test() warnx("acc y: \t%d\traw 0x%0x", (short)a_report.y_raw, (unsigned short)a_report.y_raw); warnx("acc z: \t%d\traw 0x%0x", (short)a_report.z_raw, (unsigned short)a_report.z_raw); warnx("acc range: %8.4f m/s^2 (%8.4f g)", (double)a_report.range_m_s2, - (double)(a_report.range_m_s2 / 9.81f)); + (double)(a_report.range_m_s2 / MPU6000_ONE_G)); /* do a simple demand read */ sz = read(fd_gyro, &g_report, sizeof(g_report)); - if (sz != sizeof(g_report)) + if (sz != sizeof(g_report)) { + warnx("ret: %d, expected: %d", sz, sizeof(g_report)); err(1, "immediate gyro read failed"); + } warnx("gyro x: \t% 9.5f\trad/s", (double)g_report.x); warnx("gyro y: \t% 9.5f\trad/s", (double)g_report.y); @@ -1155,7 +1539,7 @@ test() void reset() { - int fd = open(ACCEL_DEVICE_PATH, O_RDONLY); + int fd = open(MPU_DEVICE_PATH_ACCEL, O_RDONLY); if (fd < 0) err(1, "failed "); @@ -1166,6 +1550,8 @@ reset() if (ioctl(fd, SENSORIOCSPOLLRATE, SENSOR_POLLRATE_DEFAULT) < 0) err(1, "driver poll restart failed"); + close(fd); + exit(0); } |