diff options
Diffstat (limited to 'src/drivers/px4fmu/fmu.cpp')
| -rw-r--r-- | src/drivers/px4fmu/fmu.cpp | 28 |
1 files changed, 14 insertions, 14 deletions
diff --git a/src/drivers/px4fmu/fmu.cpp b/src/drivers/px4fmu/fmu.cpp index ff99de02f..7d3af4b0d 100644 --- a/src/drivers/px4fmu/fmu.cpp +++ b/src/drivers/px4fmu/fmu.cpp @@ -59,10 +59,10 @@ #include <drivers/drv_gpio.h> #include <drivers/drv_hrt.h> -#if defined(CONFIG_ARCH_BOARD_PX4FMU) +#if defined(CONFIG_ARCH_BOARD_PX4FMU_V1) # include <drivers/boards/px4fmu/px4fmu_internal.h> # define FMU_HAVE_PPM -#elif defined(CONFIG_ARCH_BOARD_PX4FMUV2) +#elif defined(CONFIG_ARCH_BOARD_PX4FMU_V2) # include <drivers/boards/px4fmuv2/px4fmu_internal.h> # undef FMU_HAVE_PPM #else @@ -158,7 +158,7 @@ private: }; const PX4FMU::GPIOConfig PX4FMU::_gpio_tab[] = { -#if defined(CONFIG_ARCH_BOARD_PX4FMU) +#if defined(CONFIG_ARCH_BOARD_PX4FMU_V1) {GPIO_GPIO0_INPUT, GPIO_GPIO0_OUTPUT, 0}, {GPIO_GPIO1_INPUT, GPIO_GPIO1_OUTPUT, 0}, {GPIO_GPIO2_INPUT, GPIO_GPIO2_OUTPUT, GPIO_USART2_CTS_1}, @@ -168,7 +168,7 @@ const PX4FMU::GPIOConfig PX4FMU::_gpio_tab[] = { {GPIO_GPIO6_INPUT, GPIO_GPIO6_OUTPUT, GPIO_CAN2_TX_2}, {GPIO_GPIO7_INPUT, GPIO_GPIO7_OUTPUT, GPIO_CAN2_RX_2}, #endif -#if defined(CONFIG_ARCH_BOARD_PX4FMUV2) +#if defined(CONFIG_ARCH_BOARD_PX4FMU_V2) {GPIO_GPIO0_INPUT, GPIO_GPIO0_OUTPUT, 0}, {GPIO_GPIO1_INPUT, GPIO_GPIO1_OUTPUT, 0}, {GPIO_GPIO2_INPUT, GPIO_GPIO2_OUTPUT, 0}, @@ -873,7 +873,7 @@ PX4FMU::gpio_reset(void) } } -#if defined(CONFIG_ARCH_BOARD_PX4FMU) +#if defined(CONFIG_ARCH_BOARD_PX4FMU_V1) /* if we have a GPIO direction control, set it to zero (input) */ stm32_gpiowrite(GPIO_GPIO_DIR, 0); stm32_configgpio(GPIO_GPIO_DIR); @@ -883,7 +883,7 @@ PX4FMU::gpio_reset(void) void PX4FMU::gpio_set_function(uint32_t gpios, int function) { -#if defined(CONFIG_ARCH_BOARD_PX4FMU) +#if defined(CONFIG_ARCH_BOARD_PX4FMU_V1) /* * GPIOs 0 and 1 must have the same direction as they are buffered * by a shared 2-port driver. Any attempt to set either sets both. @@ -918,7 +918,7 @@ PX4FMU::gpio_set_function(uint32_t gpios, int function) } } -#if defined(CONFIG_ARCH_BOARD_PX4FMU) +#if defined(CONFIG_ARCH_BOARD_PX4FMU_V1) /* flip buffer to input mode if required */ if ((GPIO_SET_INPUT == function) && (gpios & 3)) stm32_gpiowrite(GPIO_GPIO_DIR, 0); @@ -1024,17 +1024,17 @@ fmu_new_mode(PortMode new_mode) break; case PORT_FULL_PWM: -#if defined(CONFIG_ARCH_BOARD_PX4FMU) +#if defined(CONFIG_ARCH_BOARD_PX4FMU_V1) /* select 4-pin PWM mode */ servo_mode = PX4FMU::MODE_4PWM; #endif -#if defined(CONFIG_ARCH_BOARD_PX4FMUV2) +#if defined(CONFIG_ARCH_BOARD_PX4FMU_V2) servo_mode = PX4FMU::MODE_6PWM; #endif break; /* mixed modes supported on v1 board only */ -#if defined(CONFIG_ARCH_BOARD_PX4FMU) +#if defined(CONFIG_ARCH_BOARD_PX4FMU_V1) case PORT_FULL_SERIAL: /* set all multi-GPIOs to serial mode */ gpio_bits = GPIO_MULTI_1 | GPIO_MULTI_2 | GPIO_MULTI_3 | GPIO_MULTI_4; @@ -1116,7 +1116,7 @@ test(void) if (ioctl(fd, PWM_SERVO_SET(3), 1600) < 0) err(1, "servo 4 set failed"); -#if defined(CONFIG_ARCH_BOARD_PX4FMUV2) +#if defined(CONFIG_ARCH_BOARD_PX4FMU_V2) if (ioctl(fd, PWM_SERVO_SET(4), 1800) < 0) err(1, "servo 5 set failed"); if (ioctl(fd, PWM_SERVO_SET(5), 2000) < 0) err(1, "servo 6 set failed"); @@ -1183,7 +1183,7 @@ fmu_main(int argc, char *argv[]) } else if (!strcmp(verb, "mode_pwm")) { new_mode = PORT_FULL_PWM; -#if defined(CONFIG_ARCH_BOARD_PX4FMU) +#if defined(CONFIG_ARCH_BOARD_PX4FMU_V1) } else if (!strcmp(verb, "mode_serial")) { new_mode = PORT_FULL_SERIAL; @@ -1217,9 +1217,9 @@ fmu_main(int argc, char *argv[]) fake(argc - 1, argv + 1); fprintf(stderr, "FMU: unrecognised command, try:\n"); -#if defined(CONFIG_ARCH_BOARD_PX4FMU) +#if defined(CONFIG_ARCH_BOARD_PX4FMU_V1) fprintf(stderr, " mode_gpio, mode_serial, mode_pwm, mode_gpio_serial, mode_pwm_serial, mode_pwm_gpio\n"); -#elif defined(CONFIG_ARCH_BOARD_PX4FMUV2) +#elif defined(CONFIG_ARCH_BOARD_PX4FMU_V2) fprintf(stderr, " mode_gpio, mode_pwm\n"); #endif exit(1); |