diff options
Diffstat (limited to 'src/drivers/px4fmu')
-rw-r--r-- | src/drivers/px4fmu/fmu.cpp | 97 | ||||
-rw-r--r-- | src/drivers/px4fmu/module.mk | 2 |
2 files changed, 90 insertions, 9 deletions
diff --git a/src/drivers/px4fmu/fmu.cpp b/src/drivers/px4fmu/fmu.cpp index e81902494..8a4bfa18c 100644 --- a/src/drivers/px4fmu/fmu.cpp +++ b/src/drivers/px4fmu/fmu.cpp @@ -92,6 +92,7 @@ public: MODE_2PWM, MODE_4PWM, MODE_6PWM, + MODE_8PWM, }; PX4FMU(); virtual ~PX4FMU(); @@ -113,6 +114,9 @@ private: #if defined(CONFIG_ARCH_BOARD_PX4FMU_V2) static const unsigned _max_actuators = 6; #endif +#if defined(CONFIG_ARCH_BOARD_AEROCORE) + static const unsigned _max_actuators = 8; +#endif Mode _mode; unsigned _pwm_default_rate; @@ -149,7 +153,7 @@ private: unsigned _num_disarmed_set; static void task_main_trampoline(int argc, char *argv[]); - void task_main() __attribute__((noreturn)); + void task_main(); static int control_callback(uintptr_t handle, uint8_t control_group, @@ -203,6 +207,20 @@ const PX4FMU::GPIOConfig PX4FMU::_gpio_tab[] = { {GPIO_VDD_5V_HIPOWER_OC, 0, 0}, {GPIO_VDD_5V_PERIPH_OC, 0, 0}, #endif +#if defined(CONFIG_ARCH_BOARD_AEROCORE) + /* AeroCore breaks out User GPIOs on J11 */ + {GPIO_GPIO0_INPUT, GPIO_GPIO0_OUTPUT, 0}, + {GPIO_GPIO1_INPUT, GPIO_GPIO1_OUTPUT, 0}, + {GPIO_GPIO3_INPUT, GPIO_GPIO3_OUTPUT, 0}, + {GPIO_GPIO4_INPUT, GPIO_GPIO4_OUTPUT, 0}, + {GPIO_GPIO5_INPUT, GPIO_GPIO5_OUTPUT, 0}, + {GPIO_GPIO6_INPUT, GPIO_GPIO6_OUTPUT, 0}, + {GPIO_GPIO7_INPUT, GPIO_GPIO7_OUTPUT, 0}, + {GPIO_GPIO8_INPUT, GPIO_GPIO8_OUTPUT, 0}, + {GPIO_GPIO9_INPUT, GPIO_GPIO9_OUTPUT, 0}, + {GPIO_GPIO10_INPUT, GPIO_GPIO10_OUTPUT, 0}, + {GPIO_GPIO11_INPUT, GPIO_GPIO11_OUTPUT, 0}, +#endif }; const unsigned PX4FMU::_ngpio = sizeof(PX4FMU::_gpio_tab) / sizeof(PX4FMU::_gpio_tab[0]); @@ -382,6 +400,20 @@ PX4FMU::set_mode(Mode mode) break; +#ifdef CONFIG_ARCH_BOARD_AEROCORE + case MODE_8PWM: // AeroCore PWMs as 8 PWM outs + debug("MODE_8PWM"); + /* default output rates */ + _pwm_default_rate = 50; + _pwm_alt_rate = 50; + _pwm_alt_rate_channels = 0; + + /* XXX magic numbers */ + up_pwm_servo_init(0xff); + set_pwm_rate(_pwm_alt_rate_channels, _pwm_default_rate, _pwm_alt_rate); + break; +#endif + case MODE_NONE: debug("MODE_NONE"); @@ -559,13 +591,12 @@ PX4FMU::task_main() } /* sleep waiting for data, stopping to check for PPM - * input at 100Hz */ + * input at 50Hz */ int ret = ::poll(_poll_fds, _poll_fds_num, CONTROL_INPUT_DROP_LIMIT_MS); /* this would be bad... */ if (ret < 0) { log("poll error %d", errno); - usleep(1000000); continue; } else if (ret == 0) { @@ -603,6 +634,9 @@ PX4FMU::task_main() num_outputs = 6; break; + case MODE_8PWM: + num_outputs = 8; + break; default: num_outputs = 0; break; @@ -614,11 +648,9 @@ PX4FMU::task_main() /* iterate actuators */ for (unsigned i = 0; i < num_outputs; i++) { - /* last resort: catch NaN, INF and out-of-band errors */ - if (i >= outputs.noutputs || - !isfinite(outputs.output[i]) || - outputs.output[i] < -1.0f || - outputs.output[i] > 1.0f) { + /* last resort: catch NaN and INF */ + if ((i >= outputs.noutputs) || + !isfinite(outputs.output[i])) { /* * Value is NaN, INF or out of band - set to the minimum value. * This will be clearly visible on the servo status and will limit the risk of accidentally @@ -630,6 +662,7 @@ PX4FMU::task_main() uint16_t pwm_limited[num_outputs]; + /* the PWM limit call takes care of out of band errors and constrains */ pwm_limit_calc(_servo_armed, num_outputs, _disarmed_pwm, _min_pwm, _max_pwm, outputs.output, pwm_limited, &_pwm_limit); /* output to the servos */ @@ -758,6 +791,9 @@ PX4FMU::ioctl(file *filp, int cmd, unsigned long arg) case MODE_2PWM: case MODE_4PWM: case MODE_6PWM: +#ifdef CONFIG_ARCH_BOARD_AEROCORE + case MODE_8PWM: +#endif ret = pwm_ioctl(filp, cmd, arg); break; @@ -987,6 +1023,15 @@ PX4FMU::pwm_ioctl(file *filp, int cmd, unsigned long arg) break; } +#ifdef CONFIG_ARCH_BOARD_AEROCORE + case PWM_SERVO_SET(7): + case PWM_SERVO_SET(6): + if (_mode < MODE_8PWM) { + ret = -EINVAL; + break; + } +#endif + case PWM_SERVO_SET(5): case PWM_SERVO_SET(4): if (_mode < MODE_6PWM) { @@ -1014,6 +1059,15 @@ PX4FMU::pwm_ioctl(file *filp, int cmd, unsigned long arg) break; +#ifdef CONFIG_ARCH_BOARD_AEROCORE + case PWM_SERVO_GET(7): + case PWM_SERVO_GET(6): + if (_mode < MODE_8PWM) { + ret = -EINVAL; + break; + } +#endif + case PWM_SERVO_GET(5): case PWM_SERVO_GET(4): if (_mode < MODE_6PWM) { @@ -1041,12 +1095,22 @@ PX4FMU::pwm_ioctl(file *filp, int cmd, unsigned long arg) case PWM_SERVO_GET_RATEGROUP(3): case PWM_SERVO_GET_RATEGROUP(4): case PWM_SERVO_GET_RATEGROUP(5): +#ifdef CONFIG_ARCH_BOARD_AEROCORE + case PWM_SERVO_GET_RATEGROUP(6): + case PWM_SERVO_GET_RATEGROUP(7): +#endif *(uint32_t *)arg = up_pwm_servo_get_rate_group(cmd - PWM_SERVO_GET_RATEGROUP(0)); break; case PWM_SERVO_GET_COUNT: case MIXERIOCGETOUTPUTCOUNT: switch (_mode) { +#ifdef CONFIG_ARCH_BOARD_AEROCORE + case MODE_8PWM: + *(unsigned *)arg = 8; + break; +#endif + case MODE_6PWM: *(unsigned *)arg = 6; break; @@ -1092,6 +1156,11 @@ PX4FMU::pwm_ioctl(file *filp, int cmd, unsigned long arg) set_mode(MODE_6PWM); break; #endif +#if defined(CONFIG_ARCH_BOARD_AEROCORE) + case 8: + set_mode(MODE_8PWM); + break; +#endif default: ret = -EINVAL; @@ -1182,10 +1251,17 @@ PX4FMU::write(file *filp, const char *buffer, size_t len) unsigned count = len / 2; uint16_t values[6]; +#ifdef CONFIG_ARCH_BOARD_AEROCORE + if (count > 8) { + // we have at most 8 outputs + count = 8; + } +#else if (count > 6) { // we have at most 6 outputs count = 6; } +#endif // allow for misaligned values memcpy(values, buffer, count * 2); @@ -1460,6 +1536,9 @@ fmu_new_mode(PortMode new_mode) #if defined(CONFIG_ARCH_BOARD_PX4FMU_V2) servo_mode = PX4FMU::MODE_6PWM; #endif +#if defined(CONFIG_ARCH_BOARD_AEROCORE) + servo_mode = PX4FMU::MODE_8PWM; +#endif break; /* mixed modes supported on v1 board only */ @@ -1777,7 +1856,7 @@ fmu_main(int argc, char *argv[]) fprintf(stderr, "FMU: unrecognised command %s, try:\n", verb); #if defined(CONFIG_ARCH_BOARD_PX4FMU_V1) fprintf(stderr, " mode_gpio, mode_serial, mode_pwm, mode_gpio_serial, mode_pwm_serial, mode_pwm_gpio, test\n"); -#elif defined(CONFIG_ARCH_BOARD_PX4FMU_V2) +#elif defined(CONFIG_ARCH_BOARD_PX4FMU_V2) || defined(CONFIG_ARCH_BOARD_AEROCORE) fprintf(stderr, " mode_gpio, mode_pwm, test, sensor_reset [milliseconds]\n"); #endif exit(1); diff --git a/src/drivers/px4fmu/module.mk b/src/drivers/px4fmu/module.mk index 05bc7a5b3..eeb59e1a1 100644 --- a/src/drivers/px4fmu/module.mk +++ b/src/drivers/px4fmu/module.mk @@ -4,3 +4,5 @@ MODULE_COMMAND = fmu SRCS = fmu.cpp + +MODULE_STACKSIZE = 1200 |