diff options
Diffstat (limited to 'src/drivers/roboclaw/RoboClaw.hpp')
-rw-r--r-- | src/drivers/roboclaw/RoboClaw.hpp | 187 |
1 files changed, 187 insertions, 0 deletions
diff --git a/src/drivers/roboclaw/RoboClaw.hpp b/src/drivers/roboclaw/RoboClaw.hpp new file mode 100644 index 000000000..27095b357 --- /dev/null +++ b/src/drivers/roboclaw/RoboClaw.hpp @@ -0,0 +1,187 @@ +/**************************************************************************** + * + * Copyright (C) 2013 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file RoboClas.hpp + * + * RoboClaw Motor Driver + * + * references: + * http://downloads.orionrobotics.com/downloads/datasheets/motor_controller_robo_claw_R0401.pdf + * + */ + +#pragma once + +#include <poll.h> +#include <stdio.h> +#include <controllib/uorb/UOrbSubscription.hpp> +#include <uORB/topics/actuator_controls.h> +#include <drivers/device/i2c.h> + +/** + * This is a driver for the RoboClaw motor controller + */ +class RoboClaw +{ +public: + + /** control channels */ + enum e_channel { + CH_VOLTAGE_LEFT = 0, + CH_VOLTAGE_RIGHT + }; + + /** motors */ + enum e_motor { + MOTOR_1 = 0, + MOTOR_2 + }; + + /** + * constructor + * @param deviceName the name of the + * serial port e.g. "/dev/ttyS2" + * @param address the adddress of the motor + * (selectable on roboclaw) + */ + RoboClaw(const char *deviceName, uint16_t address); + + /** + * deconstructor + */ + virtual ~RoboClaw(); + + /** + * @return position of a motor, rev + */ + float getMotorPosition(e_motor motor); + + /** + * @return speed of a motor, rev/sec + */ + float getMotorSpeed(e_motor motor); + + /** + * set the speed of a motor, rev/sec + */ + int setMotorSpeed(e_motor motor, float value); + + /** + * set the duty cycle of a motor, rev/sec + */ + int setMotorDutyCycle(e_motor motor, float value); + + /** + * reset the encoders + * @return status + */ + int resetEncoders(); + + /** + * main update loop that updates RoboClaw motor + * dutycycle based on actuator publication + */ + void update(); + + /** + * read data from serial + */ + int readEncoder(e_motor motor); + + /** + * print status + */ + void status(char *string, size_t n); + +private: + + // Quadrature status flags + enum e_quadrature_status_flags { + STATUS_UNDERFLOW = 1 << 0, /**< encoder went below 0 **/ + STATUS_REVERSE = 1 << 1, /**< motor doing in reverse dir **/ + STATUS_OVERFLOW = 1 << 2, /**< encoder went above 2^32 **/ + }; + + // commands + // We just list the commands we want from the manual here. + enum e_command { + + // simple + CMD_DRIVE_FWD_1 = 0, + CMD_DRIVE_REV_1 = 1, + CMD_DRIVE_FWD_2 = 4, + CMD_DRIVE_REV_2 = 5, + + // encoder commands + CMD_READ_ENCODER_1 = 16, + CMD_READ_ENCODER_2 = 17, + CMD_RESET_ENCODERS = 20, + + // advanced motor control + CMD_READ_SPEED_HIRES_1 = 30, + CMD_READ_SPEED_HIRES_2 = 31, + CMD_SIGNED_DUTYCYCLE_1 = 32, + CMD_SIGNED_DUTYCYCLE_2 = 33, + }; + + static uint8_t checksum_mask; + + uint16_t _address; + + int _uart; + + /** poll structure for control packets */ + struct pollfd _controlPoll; + + /** actuator controls subscription */ + control::UOrbSubscription<actuator_controls_s> _actuators; + + // private data + float _motor1Position; + float _motor1Speed; + int16_t _motor1Overflow; + + float _motor2Position; + float _motor2Speed; + int16_t _motor2Overflow; + + // private methods + uint16_t _sumBytes(uint8_t * buf, size_t n); + int _sendCommand(e_command cmd, uint8_t * data, size_t n_data, uint16_t & prev_sum); +}; + +// unit testing +int roboclawTest(const char *deviceName, uint8_t address); + +// vi:noet:smarttab:autoindent:ts=4:sw=4:tw=78 |