diff options
Diffstat (limited to 'src/drivers/stm32')
| -rw-r--r-- | src/drivers/stm32/adc/adc.cpp | 14 | ||||
| -rw-r--r-- | src/drivers/stm32/drv_hrt.c | 11 | ||||
| -rw-r--r-- | src/drivers/stm32/drv_pwm_servo.c | 6 | ||||
| -rw-r--r-- | src/drivers/stm32/tone_alarm/tone_alarm.cpp | 6 |
4 files changed, 20 insertions, 17 deletions
diff --git a/src/drivers/stm32/adc/adc.cpp b/src/drivers/stm32/adc/adc.cpp index 1020eb946..00e46d6b8 100644 --- a/src/drivers/stm32/adc/adc.cpp +++ b/src/drivers/stm32/adc/adc.cpp @@ -227,7 +227,6 @@ ADC::init() if ((hrt_absolute_time() - now) > 500) { log("sample timeout"); return -1; - return 0xffff; } } @@ -282,7 +281,7 @@ ADC::close_last(struct file *filp) void ADC::_tick_trampoline(void *arg) { - ((ADC *)arg)->_tick(); + (reinterpret_cast<ADC *>(arg))->_tick(); } void @@ -342,7 +341,7 @@ test(void) err(1, "can't open ADC device"); for (unsigned i = 0; i < 50; i++) { - adc_msg_s data[8]; + adc_msg_s data[10]; ssize_t count = read(fd, data, sizeof(data)); if (count < 0) @@ -366,8 +365,15 @@ int adc_main(int argc, char *argv[]) { if (g_adc == nullptr) { - /* XXX this hardcodes the default channel set for PX4FMU - should be configurable */ +#ifdef CONFIG_ARCH_BOARD_PX4FMU_V1 + /* XXX this hardcodes the default channel set for PX4FMUv1 - should be configurable */ g_adc = new ADC((1 << 10) | (1 << 11) | (1 << 12) | (1 << 13)); +#endif +#ifdef CONFIG_ARCH_BOARD_PX4FMU_V2 + /* XXX this hardcodes the default channel set for PX4FMUv2 - should be configurable */ + g_adc = new ADC((1 << 2) | (1 << 3) | (1 << 4) | + (1 << 10) | (1 << 11) | (1 << 12) | (1 << 13) | (1 << 14) | (1 << 15)); +#endif if (g_adc == nullptr) errx(1, "couldn't allocate the ADC driver"); diff --git a/src/drivers/stm32/drv_hrt.c b/src/drivers/stm32/drv_hrt.c index 7ef3db970..58529fb03 100644 --- a/src/drivers/stm32/drv_hrt.c +++ b/src/drivers/stm32/drv_hrt.c @@ -59,7 +59,7 @@ #include <errno.h> #include <string.h> -#include <arch/board/board.h> +#include <board_config.h> #include <drivers/drv_hrt.h> #include "chip.h" @@ -70,8 +70,6 @@ #include "stm32_gpio.h" #include "stm32_tim.h" -#ifdef CONFIG_HRT_TIMER - /* HRT configuration */ #if HRT_TIMER == 1 # define HRT_TIMER_BASE STM32_TIM1_BASE @@ -275,7 +273,7 @@ static void hrt_call_invoke(void); /* * Specific registers and bits used by PPM sub-functions */ -#ifdef CONFIG_HRT_PPM +#ifdef HRT_PPM_CHANNEL /* * If the timer hardware doesn't support GTIM_CCER_CCxNP, then we will work around it. * @@ -377,7 +375,7 @@ static void hrt_ppm_decode(uint32_t status); # define CCMR1_PPM 0 # define CCMR2_PPM 0 # define CCER_PPM 0 -#endif /* CONFIG_HRT_PPM */ +#endif /* HRT_PPM_CHANNEL */ /* * Initialise the timer we are going to use. @@ -905,6 +903,3 @@ hrt_latency_update(void) /* catch-all at the end */ latency_counters[index]++; } - - -#endif /* CONFIG_HRT_TIMER */ diff --git a/src/drivers/stm32/drv_pwm_servo.c b/src/drivers/stm32/drv_pwm_servo.c index 7b060412c..dbb45a138 100644 --- a/src/drivers/stm32/drv_pwm_servo.c +++ b/src/drivers/stm32/drv_pwm_servo.c @@ -88,6 +88,7 @@ #define rCCR4(_tmr) REG(_tmr, STM32_GTIM_CCR4_OFFSET) #define rDCR(_tmr) REG(_tmr, STM32_GTIM_DCR_OFFSET) #define rDMAR(_tmr) REG(_tmr, STM32_GTIM_DMAR_OFFSET) +#define rBDTR(_tmr) REG(_tmr, STM32_ATIM_BDTR_OFFSET) static void pwm_timer_init(unsigned timer); static void pwm_timer_set_rate(unsigned timer, unsigned rate); @@ -110,6 +111,11 @@ pwm_timer_init(unsigned timer) rCCER(timer) = 0; rDCR(timer) = 0; + if ((pwm_timers[timer].base == STM32_TIM1_BASE) || (pwm_timers[timer].base == STM32_TIM8_BASE)) { + /* master output enable = on */ + rBDTR(timer) = ATIM_BDTR_MOE; + } + /* configure the timer to free-run at 1MHz */ rPSC(timer) = (pwm_timers[timer].clock_freq / 1000000) - 1; diff --git a/src/drivers/stm32/tone_alarm/tone_alarm.cpp b/src/drivers/stm32/tone_alarm/tone_alarm.cpp index 167ef30a8..24eec52af 100644 --- a/src/drivers/stm32/tone_alarm/tone_alarm.cpp +++ b/src/drivers/stm32/tone_alarm/tone_alarm.cpp @@ -104,7 +104,7 @@ #include <math.h> #include <ctype.h> -#include <arch/board/board.h> +#include <board_config.h> #include <drivers/drv_hrt.h> #include <arch/stm32/chip.h> @@ -117,10 +117,6 @@ #include <systemlib/err.h> -#ifndef CONFIG_HRT_TIMER -# error This driver requires CONFIG_HRT_TIMER -#endif - /* Tone alarm configuration */ #if TONE_ALARM_TIMER == 2 # define TONE_ALARM_BASE STM32_TIM2_BASE |