diff options
Diffstat (limited to 'src/modules/commander/gyro_calibration.c')
-rw-r--r-- | src/modules/commander/gyro_calibration.c | 151 |
1 files changed, 151 insertions, 0 deletions
diff --git a/src/modules/commander/gyro_calibration.c b/src/modules/commander/gyro_calibration.c new file mode 100644 index 000000000..f452910c9 --- /dev/null +++ b/src/modules/commander/gyro_calibration.c @@ -0,0 +1,151 @@ +/**************************************************************************** + * + * Copyright (C) 2013 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file gyro_calibration.c + * Gyroscope calibration routine + */ + +#include "gyro_calibration.h" +#include "commander_helper.h" + +#include <stdio.h> +#include <fcntl.h> +#include <poll.h> +#include <math.h> +#include <drivers/drv_hrt.h> +#include <uORB/topics/sensor_combined.h> +#include <drivers/drv_gyro.h> +#include <mavlink/mavlink_log.h> +#include <systemlib/param/param.h> +#include <systemlib/err.h> + + +void do_gyro_calibration(int mavlink_fd) +{ + mavlink_log_info(mavlink_fd, "gyro calibration starting, hold still"); + + const int calibration_count = 5000; + + int sub_sensor_combined = orb_subscribe(ORB_ID(sensor_combined)); + struct sensor_combined_s raw; + + int calibration_counter = 0; + float gyro_offset[3] = {0.0f, 0.0f, 0.0f}; + + /* set offsets to zero */ + int fd = open(GYRO_DEVICE_PATH, 0); + struct gyro_scale gscale_null = { + 0.0f, + 1.0f, + 0.0f, + 1.0f, + 0.0f, + 1.0f, + }; + + if (OK != ioctl(fd, GYROIOCSSCALE, (long unsigned int)&gscale_null)) + warn("WARNING: failed to set scale / offsets for gyro"); + + close(fd); + + while (calibration_counter < calibration_count) { + + /* wait blocking for new data */ + struct pollfd fds[1] = { { .fd = sub_sensor_combined, .events = POLLIN } }; + + int poll_ret = poll(fds, 1, 1000); + + if (poll_ret) { + orb_copy(ORB_ID(sensor_combined), sub_sensor_combined, &raw); + gyro_offset[0] += raw.gyro_rad_s[0]; + gyro_offset[1] += raw.gyro_rad_s[1]; + gyro_offset[2] += raw.gyro_rad_s[2]; + calibration_counter++; + + } else if (poll_ret == 0) { + /* any poll failure for 1s is a reason to abort */ + mavlink_log_info(mavlink_fd, "gyro calibration aborted, retry"); + return; + } + } + + gyro_offset[0] = gyro_offset[0] / calibration_count; + gyro_offset[1] = gyro_offset[1] / calibration_count; + gyro_offset[2] = gyro_offset[2] / calibration_count; + + if (isfinite(gyro_offset[0]) && isfinite(gyro_offset[1]) && isfinite(gyro_offset[2])) { + + if (param_set(param_find("SENS_GYRO_XOFF"), &(gyro_offset[0])) + || param_set(param_find("SENS_GYRO_YOFF"), &(gyro_offset[1])) + || param_set(param_find("SENS_GYRO_ZOFF"), &(gyro_offset[2]))) { + mavlink_log_critical(mavlink_fd, "Setting gyro offsets failed!"); + } + + /* set offsets to actual value */ + fd = open(GYRO_DEVICE_PATH, 0); + struct gyro_scale gscale = { + gyro_offset[0], + 1.0f, + gyro_offset[1], + 1.0f, + gyro_offset[2], + 1.0f, + }; + + if (OK != ioctl(fd, GYROIOCSSCALE, (long unsigned int)&gscale)) + warn("WARNING: failed to set scale / offsets for gyro"); + + close(fd); + + /* auto-save to EEPROM */ + int save_ret = param_save_default(); + + if (save_ret != 0) { + warn("WARNING: auto-save of params to storage failed"); + } + + // char buf[50]; + // sprintf(buf, "cal: x:%8.4f y:%8.4f z:%8.4f", (double)gyro_offset[0], (double)gyro_offset[1], (double)gyro_offset[2]); + // mavlink_log_info(mavlink_fd, buf); + mavlink_log_info(mavlink_fd, "gyro calibration done"); + + tune_positive(); + /* third beep by cal end routine */ + + } else { + mavlink_log_info(mavlink_fd, "gyro calibration FAILED (NaN)"); + } + + close(sub_sensor_combined); +} |