diff options
Diffstat (limited to 'src/modules/mavlink/waypoints.c')
-rw-r--r-- | src/modules/mavlink/waypoints.c | 1134 |
1 files changed, 1134 insertions, 0 deletions
diff --git a/src/modules/mavlink/waypoints.c b/src/modules/mavlink/waypoints.c new file mode 100644 index 000000000..a131b143b --- /dev/null +++ b/src/modules/mavlink/waypoints.c @@ -0,0 +1,1134 @@ +/**************************************************************************** + * + * Copyright (C) 2008-2012 PX4 Development Team. All rights reserved. + * Author: @author Petri Tanskanen <petri.tanskanen@inf.ethz.ch> + * @author Lorenz Meier <lm@inf.ethz.ch> + * @author Thomas Gubler <thomasgubler@student.ethz.ch> + * @author Julian Oes <joes@student.ethz.ch> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file waypoints.c + * MAVLink waypoint protocol implementation (BSD-relicensed). + */ + +#include <math.h> +#include <sys/prctl.h> +#include <unistd.h> +#include <stdio.h> + +#include "missionlib.h" +#include "waypoints.h" +#include "util.h" + +#ifndef FM_PI +#define FM_PI 3.1415926535897932384626433832795f +#endif + +bool debug = false; +bool verbose = false; + + +#define MAVLINK_WPM_NO_PRINTF + +uint8_t mavlink_wpm_comp_id = MAV_COMP_ID_MISSIONPLANNER; + +void mavlink_wpm_init(mavlink_wpm_storage *state) +{ + // Set all waypoints to zero + + // Set count to zero + state->size = 0; + state->max_size = MAVLINK_WPM_MAX_WP_COUNT; + state->current_state = MAVLINK_WPM_STATE_IDLE; + state->current_partner_sysid = 0; + state->current_partner_compid = 0; + state->timestamp_lastaction = 0; + state->timestamp_last_send_setpoint = 0; + state->timeout = MAVLINK_WPM_PROTOCOL_TIMEOUT_DEFAULT; + state->delay_setpoint = MAVLINK_WPM_SETPOINT_DELAY_DEFAULT; + state->idle = false; ///< indicates if the system is following the waypoints or is waiting + state->current_active_wp_id = -1; ///< id of current waypoint + state->yaw_reached = false; ///< boolean for yaw attitude reached + state->pos_reached = false; ///< boolean for position reached + state->timestamp_lastoutside_orbit = 0;///< timestamp when the MAV was last outside the orbit or had the wrong yaw value + state->timestamp_firstinside_orbit = 0;///< timestamp when the MAV was the first time after a waypoint change inside the orbit and had the correct yaw value + +} + +/* + * @brief Sends an waypoint ack message + */ +void mavlink_wpm_send_waypoint_ack(uint8_t sysid, uint8_t compid, uint8_t type) +{ + mavlink_message_t msg; + mavlink_mission_ack_t wpa; + + wpa.target_system = wpm->current_partner_sysid; + wpa.target_component = wpm->current_partner_compid; + wpa.type = type; + + mavlink_msg_mission_ack_encode(mavlink_system.sysid, mavlink_wpm_comp_id, &msg, &wpa); + mavlink_missionlib_send_message(&msg); + + // FIXME TIMING usleep(paramClient->getParamValue("PROTOCOLDELAY")); + + if (MAVLINK_WPM_TEXT_FEEDBACK) { +#ifdef MAVLINK_WPM_NO_PRINTF + mavlink_missionlib_send_gcs_string("Sent waypoint ACK"); +#else + + if (MAVLINK_WPM_VERBOSE) printf("Sent waypoint ack (%u) to ID %u\n", wpa.type, wpa.target_system); + +#endif + mavlink_missionlib_send_gcs_string("Sent waypoint ACK"); + } +} + +/* + * @brief Broadcasts the new target waypoint and directs the MAV to fly there + * + * This function broadcasts its new active waypoint sequence number and + * sends a message to the controller, advising it to fly to the coordinates + * of the waypoint with a given orientation + * + * @param seq The waypoint sequence number the MAV should fly to. + */ +void mavlink_wpm_send_waypoint_current(uint16_t seq) +{ + if (seq < wpm->size) { + mavlink_mission_item_t *cur = &(wpm->waypoints[seq]); + + mavlink_message_t msg; + mavlink_mission_current_t wpc; + + wpc.seq = cur->seq; + + mavlink_msg_mission_current_encode(mavlink_system.sysid, mavlink_wpm_comp_id, &msg, &wpc); + mavlink_missionlib_send_message(&msg); + + // FIXME TIMING usleep(paramClient->getParamValue("PROTOCOLDELAY")); + + if (MAVLINK_WPM_TEXT_FEEDBACK) mavlink_missionlib_send_gcs_string("Set current waypoint\n"); //// printf("Broadcasted new current waypoint %u\n", wpc.seq); + + } else { + if (MAVLINK_WPM_TEXT_FEEDBACK) mavlink_missionlib_send_gcs_string("ERROR: wp index out of bounds\n"); + } +} + +/* + * @brief Directs the MAV to fly to a position + * + * Sends a message to the controller, advising it to fly to the coordinates + * of the waypoint with a given orientation + * + * @param seq The waypoint sequence number the MAV should fly to. + */ +void mavlink_wpm_send_setpoint(uint16_t seq) +{ + if (seq < wpm->size) { + mavlink_mission_item_t *cur = &(wpm->waypoints[seq]); + mavlink_missionlib_current_waypoint_changed(cur->seq, cur->param1, + cur->param2, cur->param3, cur->param4, cur->x, + cur->y, cur->z, cur->frame, cur->command); + + wpm->timestamp_last_send_setpoint = mavlink_missionlib_get_system_timestamp(); + + } else { + if (MAVLINK_WPM_TEXT_FEEDBACK) mavlink_missionlib_send_gcs_string("ERROR: Waypoint index out of bounds\n"); //// if (verbose) // printf("ERROR: index out of bounds\n"); + } +} + +void mavlink_wpm_send_waypoint_count(uint8_t sysid, uint8_t compid, uint16_t count) +{ + mavlink_message_t msg; + mavlink_mission_count_t wpc; + + wpc.target_system = wpm->current_partner_sysid; + wpc.target_component = wpm->current_partner_compid; + wpc.count = count; + + mavlink_msg_mission_count_encode(mavlink_system.sysid, mavlink_wpm_comp_id, &msg, &wpc); + mavlink_missionlib_send_message(&msg); + + if (MAVLINK_WPM_TEXT_FEEDBACK) mavlink_missionlib_send_gcs_string("Sent waypoint count"); //// if (verbose) // printf("Sent waypoint count (%u) to ID %u\n", wpc.count, wpc.target_system); + + // FIXME TIMING usleep(paramClient->getParamValue("PROTOCOLDELAY")); +} + +void mavlink_wpm_send_waypoint(uint8_t sysid, uint8_t compid, uint16_t seq) +{ + if (seq < wpm->size) { + mavlink_message_t msg; + mavlink_mission_item_t *wp = &(wpm->waypoints[seq]); + wp->target_system = wpm->current_partner_sysid; + wp->target_component = wpm->current_partner_compid; + mavlink_msg_mission_item_encode(mavlink_system.sysid, mavlink_wpm_comp_id, &msg, wp); + mavlink_missionlib_send_message(&msg); + + if (MAVLINK_WPM_TEXT_FEEDBACK) mavlink_missionlib_send_gcs_string("Sent waypoint"); //// if (verbose) // printf("Sent waypoint %u to ID %u\n", wp->seq, wp->target_system); + + // FIXME TIMING usleep(paramClient->getParamValue("PROTOCOLDELAY")); + + } else { + if (MAVLINK_WPM_TEXT_FEEDBACK) mavlink_missionlib_send_gcs_string("ERROR: Waypoint index out of bounds\n"); + } +} + +void mavlink_wpm_send_waypoint_request(uint8_t sysid, uint8_t compid, uint16_t seq) +{ + if (seq < wpm->max_size) { + mavlink_message_t msg; + mavlink_mission_request_t wpr; + wpr.target_system = wpm->current_partner_sysid; + wpr.target_component = wpm->current_partner_compid; + wpr.seq = seq; + mavlink_msg_mission_request_encode(mavlink_system.sysid, mavlink_wpm_comp_id, &msg, &wpr); + mavlink_missionlib_send_message(&msg); + + if (MAVLINK_WPM_TEXT_FEEDBACK) mavlink_missionlib_send_gcs_string("Sent waypoint request"); //// if (verbose) // printf("Sent waypoint request %u to ID %u\n", wpr.seq, wpr.target_system); + + // FIXME TIMING usleep(paramClient->getParamValue("PROTOCOLDELAY")); + + } else { + if (MAVLINK_WPM_TEXT_FEEDBACK) mavlink_missionlib_send_gcs_string("ERROR: Waypoint index exceeds list capacity\n"); + } +} + +/* + * @brief emits a message that a waypoint reached + * + * This function broadcasts a message that a waypoint is reached. + * + * @param seq The waypoint sequence number the MAV has reached. + */ +void mavlink_wpm_send_waypoint_reached(uint16_t seq) +{ + mavlink_message_t msg; + mavlink_mission_item_reached_t wp_reached; + + wp_reached.seq = seq; + + mavlink_msg_mission_item_reached_encode(mavlink_system.sysid, mavlink_wpm_comp_id, &msg, &wp_reached); + mavlink_missionlib_send_message(&msg); + + if (MAVLINK_WPM_TEXT_FEEDBACK) mavlink_missionlib_send_gcs_string("Sent waypoint reached message"); //// if (verbose) // printf("Sent waypoint %u reached message\n", wp_reached.seq); + + // FIXME TIMING usleep(paramClient->getParamValue("PROTOCOLDELAY")); +} + +//float mavlink_wpm_distance_to_segment(uint16_t seq, float x, float y, float z) +//{ +// if (seq < wpm->size) +// { +// mavlink_mission_item_t *cur = waypoints->at(seq); +// +// const PxVector3 A(cur->x, cur->y, cur->z); +// const PxVector3 C(x, y, z); +// +// // seq not the second last waypoint +// if ((uint16_t)(seq+1) < wpm->size) +// { +// mavlink_mission_item_t *next = waypoints->at(seq+1); +// const PxVector3 B(next->x, next->y, next->z); +// const float r = (B-A).dot(C-A) / (B-A).lengthSquared(); +// if (r >= 0 && r <= 1) +// { +// const PxVector3 P(A + r*(B-A)); +// return (P-C).length(); +// } +// else if (r < 0.f) +// { +// return (C-A).length(); +// } +// else +// { +// return (C-B).length(); +// } +// } +// else +// { +// return (C-A).length(); +// } +// } +// else +// { +// // if (verbose) // printf("ERROR: index out of bounds\n"); +// } +// return -1.f; +//} + +/* + * Calculate distance in global frame. + * + * The distance calculation is based on the WGS84 geoid (GPS) + */ +float mavlink_wpm_distance_to_point_global_wgs84(uint16_t seq, float lat, float lon, float alt) +{ + //TODO: implement for z once altidude contoller is implemented + + static uint16_t counter; + +// if(counter % 10 == 0) printf(" x = %.10f, y = %.10f\n", x, y); + if (seq < wpm->size) { + mavlink_mission_item_t *cur = &(wpm->waypoints[seq]); + + double current_x_rad = cur->x / 180.0 * M_PI; + double current_y_rad = cur->y / 180.0 * M_PI; + double x_rad = lat / 180.0 * M_PI; + double y_rad = lon / 180.0 * M_PI; + + double d_lat = x_rad - current_x_rad; + double d_lon = y_rad - current_y_rad; + + double a = sin(d_lat / 2.0) * sin(d_lat / 2.0) + sin(d_lon / 2.0) * sin(d_lon / 2.0f) * cos(current_x_rad) * cos(x_rad); + double c = 2 * atan2(sqrt(a), sqrt(1 - a)); + + const double radius_earth = 6371000.0; + + return radius_earth * c; + + } else { + return -1.0f; + } + + counter++; + +} + +/* + * Calculate distance in local frame (NED) + */ +float mavlink_wpm_distance_to_point_local(uint16_t seq, float x, float y, float z) +{ + if (seq < wpm->size) { + mavlink_mission_item_t *cur = &(wpm->waypoints[seq]); + + float dx = (cur->x - x); + float dy = (cur->y - y); + float dz = (cur->z - z); + + return sqrt(dx * dx + dy * dy + dz * dz); + + } else { + return -1.0f; + } +} + +void check_waypoints_reached(uint64_t now, const struct vehicle_global_position_s *global_pos, struct vehicle_local_position_s *local_pos) +{ + static uint16_t counter; + + // Do not flood the precious wireless link with debug data + // if (wpm->size > 0 && counter % 10 == 0) { + // printf("Currect active waypoint id: %i\n", wpm->current_active_wp_id); + // } + + + if (wpm->current_active_wp_id < wpm->size) { + + float orbit = wpm->waypoints[wpm->current_active_wp_id].param2; + int coordinate_frame = wpm->waypoints[wpm->current_active_wp_id].frame; + float dist = -1.0f; + + if (coordinate_frame == (int)MAV_FRAME_GLOBAL) { + dist = mavlink_wpm_distance_to_point_global_wgs84(wpm->current_active_wp_id, (float)global_pos->lat * 1e-7f, (float)global_pos->lon * 1e-7f, global_pos->alt); + + } else if (coordinate_frame == (int)MAV_FRAME_GLOBAL_RELATIVE_ALT) { + dist = mavlink_wpm_distance_to_point_global_wgs84(wpm->current_active_wp_id, global_pos->lat, global_pos->lon, global_pos->relative_alt); + + } else if (coordinate_frame == (int)MAV_FRAME_LOCAL_ENU || coordinate_frame == (int)MAV_FRAME_LOCAL_NED) { + dist = mavlink_wpm_distance_to_point_local(wpm->current_active_wp_id, local_pos->x, local_pos->y, local_pos->z); + + } else if (coordinate_frame == (int)MAV_FRAME_MISSION) { + /* Check if conditions of mission item are satisfied */ + // XXX TODO + } + + if (dist >= 0.f && dist <= orbit /*&& wpm->yaw_reached*/) { //TODO implement yaw + wpm->pos_reached = true; + + if (counter % 100 == 0) + printf("Setpoint reached: %0.4f, orbit: %.4f\n", dist, orbit); + } + +// else +// { +// if(counter % 100 == 0) +// printf("Setpoint not reached yet: %0.4f, orbit: %.4f, coordinate frame: %d\n",dist, orbit, coordinate_frame); +// } + } + + //check if the current waypoint was reached + if (wpm->pos_reached /*wpm->yaw_reached &&*/ && !wpm->idle) { + if (wpm->current_active_wp_id < wpm->size) { + mavlink_mission_item_t *cur_wp = &(wpm->waypoints[wpm->current_active_wp_id]); + + if (wpm->timestamp_firstinside_orbit == 0) { + // Announce that last waypoint was reached + printf("Reached waypoint %u for the first time \n", cur_wp->seq); + mavlink_wpm_send_waypoint_reached(cur_wp->seq); + wpm->timestamp_firstinside_orbit = now; + } + + // check if the MAV was long enough inside the waypoint orbit + //if (now-timestamp_lastoutside_orbit > (cur_wp->hold_time*1000)) + if (now - wpm->timestamp_firstinside_orbit >= cur_wp->param2 * 1000) { + printf("Reached waypoint %u long enough \n", cur_wp->seq); + + if (cur_wp->autocontinue) { + cur_wp->current = 0; + + if (wpm->current_active_wp_id == wpm->size - 1 && wpm->size > 1) { + /* the last waypoint was reached, if auto continue is + * activated restart the waypoint list from the beginning + */ + wpm->current_active_wp_id = 0; + + } else { + if ((uint16_t)(wpm->current_active_wp_id + 1) < wpm->size) + wpm->current_active_wp_id++; + } + + // Fly to next waypoint + wpm->timestamp_firstinside_orbit = 0; + mavlink_wpm_send_waypoint_current(wpm->current_active_wp_id); + mavlink_wpm_send_setpoint(wpm->current_active_wp_id); + wpm->waypoints[wpm->current_active_wp_id].current = true; + wpm->pos_reached = false; + wpm->yaw_reached = false; + printf("Set new waypoint (%u)\n", wpm->current_active_wp_id); + } + } + } + + } else { + wpm->timestamp_lastoutside_orbit = now; + } + + counter++; +} + + +int mavlink_waypoint_eventloop(uint64_t now, const struct vehicle_global_position_s *global_position, struct vehicle_local_position_s *local_position) +{ + /* check for timed-out operations */ + if (now - wpm->timestamp_lastaction > wpm->timeout && wpm->current_state != MAVLINK_WPM_STATE_IDLE) { + +#ifdef MAVLINK_WPM_NO_PRINTF + mavlink_missionlib_send_gcs_string("Operation timeout switching -> IDLE"); +#else + + if (MAVLINK_WPM_VERBOSE) printf("Last operation (state=%u) timed out, changing state to MAVLINK_WPM_STATE_IDLE\n", wpm->current_state); + +#endif + wpm->current_state = MAVLINK_WPM_STATE_IDLE; + wpm->current_count = 0; + wpm->current_partner_sysid = 0; + wpm->current_partner_compid = 0; + wpm->current_wp_id = -1; + + if (wpm->size == 0) { + wpm->current_active_wp_id = -1; + } + } + + // Do NOT continously send the current WP, since we're not loosing messages + // if (now - wpm->timestamp_last_send_setpoint > wpm->delay_setpoint && wpm->current_active_wp_id < wpm->size) { + // mavlink_wpm_send_setpoint(wpm->current_active_wp_id); + // } + + check_waypoints_reached(now, global_position , local_position); + + return OK; +} + + +void mavlink_wpm_message_handler(const mavlink_message_t *msg, const struct vehicle_global_position_s *global_pos , struct vehicle_local_position_s *local_pos) +{ + uint64_t now = mavlink_missionlib_get_system_timestamp(); + + switch (msg->msgid) { +// case MAVLINK_MSG_ID_ATTITUDE: +// { +// if(msg->sysid == mavlink_system.sysid && wpm->current_active_wp_id < wpm->size) +// { +// mavlink_mission_item_t *wp = &(wpm->waypoints[wpm->current_active_wp_id]); +// if(wp->frame == MAV_FRAME_LOCAL_ENU || wp->frame == MAV_FRAME_LOCAL_NED) +// { +// mavlink_attitude_t att; +// mavlink_msg_attitude_decode(msg, &att); +// float yaw_tolerance = wpm->accept_range_yaw; +// //compare current yaw +// if (att.yaw - yaw_tolerance >= 0.0f && att.yaw + yaw_tolerance < 2.f*FM_PI) +// { +// if (att.yaw - yaw_tolerance <= wp->param4 && att.yaw + yaw_tolerance >= wp->param4) +// wpm->yaw_reached = true; +// } +// else if(att.yaw - yaw_tolerance < 0.0f) +// { +// float lowerBound = 360.0f + att.yaw - yaw_tolerance; +// if (lowerBound < wp->param4 || wp->param4 < att.yaw + yaw_tolerance) +// wpm->yaw_reached = true; +// } +// else +// { +// float upperBound = att.yaw + yaw_tolerance - 2.f*FM_PI; +// if (att.yaw - yaw_tolerance < wp->param4 || wp->param4 < upperBound) +// wpm->yaw_reached = true; +// } +// } +// } +// break; +// } +// +// case MAVLINK_MSG_ID_LOCAL_POSITION_NED: +// { +// if(msg->sysid == mavlink_system.sysid && wpm->current_active_wp_id < wpm->size) +// { +// mavlink_mission_item_t *wp = &(wpm->waypoints[wpm->current_active_wp_id]); +// +// if(wp->frame == MAV_FRAME_LOCAL_ENU || MAV_FRAME_LOCAL_NED) +// { +// mavlink_local_position_ned_t pos; +// mavlink_msg_local_position_ned_decode(msg, &pos); +// //// if (debug) // printf("Received new position: x: %f | y: %f | z: %f\n", pos.x, pos.y, pos.z); +// +// wpm->pos_reached = false; +// +// // compare current position (given in message) with current waypoint +// float orbit = wp->param1; +// +// float dist; +//// if (wp->param2 == 0) +//// { +//// // FIXME segment distance +//// //dist = mavlink_wpm_distance_to_segment(current_active_wp_id, pos.x, pos.y, pos.z); +//// } +//// else +//// { +// dist = mavlink_wpm_distance_to_point(wpm->current_active_wp_id, pos.x, pos.y, pos.z); +//// } +// +// if (dist >= 0.f && dist <= orbit && wpm->yaw_reached) +// { +// wpm->pos_reached = true; +// } +// } +// } +// break; +// } + +// case MAVLINK_MSG_ID_CMD: // special action from ground station +// { +// mavlink_cmd_t action; +// mavlink_msg_cmd_decode(msg, &action); +// if(action.target == mavlink_system.sysid) +// { +// // if (verbose) std::cerr << "Waypoint: received message with action " << action.action << std::endl; +// switch (action.action) +// { +// // case MAV_ACTION_LAUNCH: +// // // if (verbose) std::cerr << "Launch received" << std::endl; +// // current_active_wp_id = 0; +// // if (wpm->size>0) +// // { +// // setActive(waypoints[current_active_wp_id]); +// // } +// // else +// // // if (verbose) std::cerr << "No launch, waypointList empty" << std::endl; +// // break; +// +// // case MAV_ACTION_CONTINUE: +// // // if (verbose) std::c +// // err << "Continue received" << std::endl; +// // idle = false; +// // setActive(waypoints[current_active_wp_id]); +// // break; +// +// // case MAV_ACTION_HALT: +// // // if (verbose) std::cerr << "Halt received" << std::endl; +// // idle = true; +// // break; +// +// // default: +// // // if (verbose) std::cerr << "Unknown action received with id " << action.action << ", no action taken" << std::endl; +// // break; +// } +// } +// break; +// } + + case MAVLINK_MSG_ID_MISSION_ACK: { + mavlink_mission_ack_t wpa; + mavlink_msg_mission_ack_decode(msg, &wpa); + + if ((msg->sysid == wpm->current_partner_sysid && msg->compid == wpm->current_partner_compid) && (wpa.target_system == mavlink_system.sysid /*&& wpa.target_component == mavlink_wpm_comp_id*/)) { + wpm->timestamp_lastaction = now; + + if (wpm->current_state == MAVLINK_WPM_STATE_SENDLIST || wpm->current_state == MAVLINK_WPM_STATE_SENDLIST_SENDWPS) { + if (wpm->current_wp_id == wpm->size - 1) { +#ifdef MAVLINK_WPM_NO_PRINTF + mavlink_missionlib_send_gcs_string("Got last WP ACK state -> IDLE"); +#else + + if (MAVLINK_WPM_VERBOSE) printf("Received ACK after having sent last waypoint, going to state MAVLINK_WPM_STATE_IDLE\n"); + +#endif + wpm->current_state = MAVLINK_WPM_STATE_IDLE; + wpm->current_wp_id = 0; + } + } + + } else { +#ifdef MAVLINK_WPM_NO_PRINTF + mavlink_missionlib_send_gcs_string("REJ. WP CMD: curr partner id mismatch"); +#else + + if (MAVLINK_WPM_VERBOSE) printf("IGNORED WAYPOINT COMMAND BECAUSE TARGET SYSTEM AND COMPONENT OR COMM PARTNER ID MISMATCH\n"); + +#endif + } + + break; + } + + case MAVLINK_MSG_ID_MISSION_SET_CURRENT: { + mavlink_mission_set_current_t wpc; + mavlink_msg_mission_set_current_decode(msg, &wpc); + + if (wpc.target_system == mavlink_system.sysid /*&& wpc.target_component == mavlink_wpm_comp_id*/) { + wpm->timestamp_lastaction = now; + + if (wpm->current_state == MAVLINK_WPM_STATE_IDLE) { + if (wpc.seq < wpm->size) { + // if (verbose) // printf("Received MAVLINK_MSG_ID_MISSION_ITEM_SET_CURRENT\n"); + wpm->current_active_wp_id = wpc.seq; + uint32_t i; + + for (i = 0; i < wpm->size; i++) { + if (i == wpm->current_active_wp_id) { + wpm->waypoints[i].current = true; + + } else { + wpm->waypoints[i].current = false; + } + } + +#ifdef MAVLINK_WPM_NO_PRINTF + mavlink_missionlib_send_gcs_string("NEW WP SET"); +#else + + if (MAVLINK_WPM_VERBOSE) printf("New current waypoint %u\n", wpm->current_active_wp_id); + +#endif + wpm->yaw_reached = false; + wpm->pos_reached = false; + mavlink_wpm_send_waypoint_current(wpm->current_active_wp_id); + mavlink_wpm_send_setpoint(wpm->current_active_wp_id); + wpm->timestamp_firstinside_orbit = 0; + + } else { +#ifdef MAVLINK_WPM_NO_PRINTF + mavlink_missionlib_send_gcs_string("IGN WP CURR CMD: Not in list"); +#else + + if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_SET_CURRENT: Index out of bounds\n"); + +#endif + } + + } else { +#ifdef MAVLINK_WPM_NO_PRINTF + mavlink_missionlib_send_gcs_string("IGN WP CURR CMD: Busy"); +#else + + if (MAVLINK_WPM_VERBOSE) printf("IGNORED WAYPOINT COMMAND BECAUSE NOT IN IDLE STATE\n"); + +#endif + } + + } else { +#ifdef MAVLINK_WPM_NO_PRINTF + mavlink_missionlib_send_gcs_string("REJ. WP CMD: target id mismatch"); +#else + + if (MAVLINK_WPM_VERBOSE) printf("IGNORED WAYPOINT COMMAND BECAUSE TARGET SYSTEM AND COMPONENT OR COMM PARTNER ID MISMATCH\n"); + +#endif + } + + break; + } + + case MAVLINK_MSG_ID_MISSION_REQUEST_LIST: { + mavlink_mission_request_list_t wprl; + mavlink_msg_mission_request_list_decode(msg, &wprl); + + if (wprl.target_system == mavlink_system.sysid /*&& wprl.target_component == mavlink_wpm_comp_id*/) { + wpm->timestamp_lastaction = now; + + if (wpm->current_state == MAVLINK_WPM_STATE_IDLE || wpm->current_state == MAVLINK_WPM_STATE_SENDLIST) { + if (wpm->size > 0) { + //if (verbose && wpm->current_state == MAVLINK_WPM_STATE_IDLE) // printf("Got MAVLINK_MSG_ID_MISSION_ITEM_REQUEST_LIST from %u changing state to MAVLINK_WPM_STATE_SENDLIST\n", msg->sysid); +// if (verbose && wpm->current_state == MAVLINK_WPM_STATE_SENDLIST) // printf("Got MAVLINK_MSG_ID_MISSION_ITEM_REQUEST_LIST again from %u staying in state MAVLINK_WPM_STATE_SENDLIST\n", msg->sysid); + wpm->current_state = MAVLINK_WPM_STATE_SENDLIST; + wpm->current_wp_id = 0; + wpm->current_partner_sysid = msg->sysid; + wpm->current_partner_compid = msg->compid; + + } else { + // if (verbose) // printf("Got MAVLINK_MSG_ID_MISSION_ITEM_REQUEST_LIST from %u but have no waypoints, staying in \n", msg->sysid); + } + + wpm->current_count = wpm->size; + mavlink_wpm_send_waypoint_count(msg->sysid, msg->compid, wpm->current_count); + + } else { + // if (verbose) // printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_REQUEST_LIST because i'm doing something else already (state=%i).\n", wpm->current_state); + } + } else { + // if (verbose) // printf("IGNORED WAYPOINT COMMAND BECAUSE TARGET SYSTEM AND COMPONENT MISMATCH\n"); + } + + break; + } + + case MAVLINK_MSG_ID_MISSION_REQUEST: { + mavlink_mission_request_t wpr; + mavlink_msg_mission_request_decode(msg, &wpr); + + if (msg->sysid == wpm->current_partner_sysid && msg->compid == wpm->current_partner_compid && wpr.target_system == mavlink_system.sysid /*&& wpr.target_component == mavlink_wpm_comp_id*/) { + wpm->timestamp_lastaction = now; + + //ensure that we are in the correct state and that the first request has id 0 and the following requests have either the last id (re-send last waypoint) or last_id+1 (next waypoint) + if ((wpm->current_state == MAVLINK_WPM_STATE_SENDLIST && wpr.seq == 0) || (wpm->current_state == MAVLINK_WPM_STATE_SENDLIST_SENDWPS && (wpr.seq == wpm->current_wp_id || wpr.seq == wpm->current_wp_id + 1) && wpr.seq < wpm->size)) { + if (wpm->current_state == MAVLINK_WPM_STATE_SENDLIST) { +#ifdef MAVLINK_WPM_NO_PRINTF + mavlink_missionlib_send_gcs_string("GOT WP REQ, state -> SEND"); +#else + + if (MAVLINK_WPM_VERBOSE) printf("Got MAVLINK_MSG_ID_MISSION_ITEM_REQUEST of waypoint %u from %u changing state to MAVLINK_WPM_STATE_SENDLIST_SENDWPS\n", wpr.seq, msg->sysid); + +#endif + } + + if (wpm->current_state == MAVLINK_WPM_STATE_SENDLIST_SENDWPS && wpr.seq == wpm->current_wp_id + 1) { +#ifdef MAVLINK_WPM_NO_PRINTF + mavlink_missionlib_send_gcs_string("GOT 2nd WP REQ"); +#else + + if (MAVLINK_WPM_VERBOSE) printf("Got MAVLINK_MSG_ID_MISSION_ITEM_REQUEST of waypoint %u from %u staying in state MAVLINK_WPM_STATE_SENDLIST_SENDWPS\n", wpr.seq, msg->sysid); + +#endif + } + + if (wpm->current_state == MAVLINK_WPM_STATE_SENDLIST_SENDWPS && wpr.seq == wpm->current_wp_id) { +#ifdef MAVLINK_WPM_NO_PRINTF + mavlink_missionlib_send_gcs_string("GOT 2nd WP REQ"); +#else + + if (MAVLINK_WPM_VERBOSE) printf("Got MAVLINK_MSG_ID_MISSION_ITEM_REQUEST of waypoint %u (again) from %u staying in state MAVLINK_WPM_STATE_SENDLIST_SENDWPS\n", wpr.seq, msg->sysid); + +#endif + } + + wpm->current_state = MAVLINK_WPM_STATE_SENDLIST_SENDWPS; + wpm->current_wp_id = wpr.seq; + mavlink_wpm_send_waypoint(wpm->current_partner_sysid, wpm->current_partner_compid, wpr.seq); + + } else { + // if (verbose) + { + if (!(wpm->current_state == MAVLINK_WPM_STATE_SENDLIST || wpm->current_state == MAVLINK_WPM_STATE_SENDLIST_SENDWPS)) { +#ifdef MAVLINK_WPM_NO_PRINTF + mavlink_missionlib_send_gcs_string("REJ. WP CMD: Busy"); +#else + + if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_REQUEST because i'm doing something else already (state=%i).\n", wpm->current_state); + +#endif + break; + + } else if (wpm->current_state == MAVLINK_WPM_STATE_SENDLIST) { + if (wpr.seq != 0) { +#ifdef MAVLINK_WPM_NO_PRINTF + mavlink_missionlib_send_gcs_string("REJ. WP CMD: First id != 0"); +#else + + if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_REQUEST because the first requested waypoint ID (%u) was not 0.\n", wpr.seq); + +#endif + } + + } else if (wpm->current_state == MAVLINK_WPM_STATE_SENDLIST_SENDWPS) { + if (wpr.seq != wpm->current_wp_id && wpr.seq != wpm->current_wp_id + 1) { +#ifdef MAVLINK_WPM_NO_PRINTF + mavlink_missionlib_send_gcs_string("REJ. WP CMD: Req. WP was unexpected"); +#else + + if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_REQUEST because the requested waypoint ID (%u) was not the expected (%u or %u).\n", wpr.seq, wpm->current_wp_id, wpm->current_wp_id + 1); + +#endif + + } else if (wpr.seq >= wpm->size) { +#ifdef MAVLINK_WPM_NO_PRINTF + mavlink_missionlib_send_gcs_string("REJ. WP CMD: Req. WP not in list"); +#else + + if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_REQUEST because the requested waypoint ID (%u) was out of bounds.\n", wpr.seq); + +#endif + } + + } else { +#ifdef MAVLINK_WPM_NO_PRINTF + mavlink_missionlib_send_gcs_string("REJ. WP CMD: ?"); +#else + + if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_REQUEST - FIXME: missed error description\n"); + +#endif + } + } + } + + } else { + //we we're target but already communicating with someone else + if ((wpr.target_system == mavlink_system.sysid /*&& wpr.target_component == mavlink_wpm_comp_id*/) && !(msg->sysid == wpm->current_partner_sysid && msg->compid == wpm->current_partner_compid)) { +#ifdef MAVLINK_WPM_NO_PRINTF + mavlink_missionlib_send_gcs_string("REJ. WP CMD: Busy"); +#else + + if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_REQUEST from ID %u because i'm already talking to ID %u.\n", msg->sysid, wpm->current_partner_sysid); + +#endif + + } else { +#ifdef MAVLINK_WPM_NO_PRINTF + mavlink_missionlib_send_gcs_string("REJ. WP CMD: target id mismatch"); +#else + + if (MAVLINK_WPM_VERBOSE) printf("IGNORED WAYPOINT COMMAND BECAUSE TARGET SYSTEM AND COMPONENT OR COMM PARTNER ID MISMATCH\n"); + +#endif + } + + } + + break; + } + + case MAVLINK_MSG_ID_MISSION_COUNT: { + mavlink_mission_count_t wpc; + mavlink_msg_mission_count_decode(msg, &wpc); + + if (wpc.target_system == mavlink_system.sysid/* && wpc.target_component == mavlink_wpm_comp_id*/) { + wpm->timestamp_lastaction = now; + + if (wpm->current_state == MAVLINK_WPM_STATE_IDLE || (wpm->current_state == MAVLINK_WPM_STATE_GETLIST && wpm->current_wp_id == 0)) { +// printf("wpc count in: %d\n",wpc.count); +// printf("Comp id: %d\n",msg->compid); +// printf("Current partner sysid: %d\n",wpm->current_partner_sysid); + + if (wpc.count > 0) { + if (wpm->current_state == MAVLINK_WPM_STATE_IDLE) { +#ifdef MAVLINK_WPM_NO_PRINTF + mavlink_missionlib_send_gcs_string("WP CMD OK: state -> GETLIST"); +#else + + if (MAVLINK_WPM_VERBOSE) printf("Got MAVLINK_MSG_ID_MISSION_ITEM_COUNT (%u) from %u changing state to MAVLINK_WPM_STATE_GETLIST\n", wpc.count, msg->sysid); + +#endif + } + + if (wpm->current_state == MAVLINK_WPM_STATE_GETLIST) { +#ifdef MAVLINK_WPM_NO_PRINTF + mavlink_missionlib_send_gcs_string("WP CMD OK AGAIN"); +#else + + if (MAVLINK_WPM_VERBOSE) printf("Got MAVLINK_MSG_ID_MISSION_ITEM_COUNT (%u) again from %u\n", wpc.count, msg->sysid); + +#endif + } + + wpm->current_state = MAVLINK_WPM_STATE_GETLIST; + wpm->current_wp_id = 0; + wpm->current_partner_sysid = msg->sysid; + wpm->current_partner_compid = msg->compid; + wpm->current_count = wpc.count; + +#ifdef MAVLINK_WPM_NO_PRINTF + mavlink_missionlib_send_gcs_string("CLR RCV BUF: READY"); +#else + + if (MAVLINK_WPM_VERBOSE) printf("clearing receive buffer and readying for receiving waypoints\n"); + +#endif + wpm->rcv_size = 0; + //while(waypoints_receive_buffer->size() > 0) +// { +// delete waypoints_receive_buffer->back(); +// waypoints_receive_buffer->pop_back(); +// } + + mavlink_wpm_send_waypoint_request(wpm->current_partner_sysid, wpm->current_partner_compid, wpm->current_wp_id); + + } else if (wpc.count == 0) { +#ifdef MAVLINK_WPM_NO_PRINTF + mavlink_missionlib_send_gcs_string("COUNT 0"); +#else + + if (MAVLINK_WPM_VERBOSE) printf("got waypoint count of 0, clearing waypoint list and staying in state MAVLINK_WPM_STATE_IDLE\n"); + +#endif + wpm->rcv_size = 0; + //while(waypoints_receive_buffer->size() > 0) +// { +// delete waypoints->back(); +// waypoints->pop_back(); +// } + wpm->current_active_wp_id = -1; + wpm->yaw_reached = false; + wpm->pos_reached = false; + break; + + } else { +#ifdef MAVLINK_WPM_NO_PRINTF + mavlink_missionlib_send_gcs_string("IGN WP CMD"); +#else + + if (MAVLINK_WPM_VERBOSE) printf("Ignoring MAVLINK_MSG_ID_MISSION_ITEM_COUNT from %u with count of %u\n", msg->sysid, wpc.count); + +#endif + } + + } else { + if (!(wpm->current_state == MAVLINK_WPM_STATE_IDLE || wpm->current_state == MAVLINK_WPM_STATE_GETLIST)) { +#ifdef MAVLINK_WPM_NO_PRINTF + mavlink_missionlib_send_gcs_string("REJ. WP CMD: Busy"); +#else + + if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_COUNT because i'm doing something else already (state=%i).\n", wpm->current_state); + +#endif + + } else if (wpm->current_state == MAVLINK_WPM_STATE_GETLIST && wpm->current_wp_id != 0) { +#ifdef MAVLINK_WPM_NO_PRINTF + mavlink_missionlib_send_gcs_string("REJ. WP CMD: Busy"); +#else + + if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_COUNT because i'm already receiving waypoint %u.\n", wpm->current_wp_id); + +#endif + + } else { +#ifdef MAVLINK_WPM_NO_PRINTF + mavlink_missionlib_send_gcs_string("REJ. WP CMD: ?"); +#else + + if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_COUNT - FIXME: missed error description\n"); + +#endif + } + } + + } else { +#ifdef MAVLINK_WPM_NO_PRINTF + mavlink_missionlib_send_gcs_string("REJ. WP CMD: target id mismatch"); +#else + + if (MAVLINK_WPM_VERBOSE) printf("IGNORED WAYPOINT COMMAND BECAUSE TARGET SYSTEM AND COMPONENT OR COMM PARTNER ID MISMATCH\n"); + +#endif + } + + } + break; + + case MAVLINK_MSG_ID_MISSION_ITEM: { + mavlink_mission_item_t wp; + mavlink_msg_mission_item_decode(msg, &wp); + + mavlink_missionlib_send_gcs_string("GOT WP"); +// printf("sysid=%d, current_partner_sysid=%d\n", msg->sysid, wpm->current_partner_sysid); +// printf("compid=%d, current_partner_compid=%d\n", msg->compid, wpm->current_partner_compid); + +// if((msg->sysid == wpm->current_partner_sysid && msg->compid == wpm->current_partner_compid) && (wp.target_system == mavlink_system.sysid /*&& wp.target_component == mavlink_wpm_comp_id*/)) + if (wp.target_system == mavlink_system.sysid && wp.target_component == mavlink_wpm_comp_id) { + + wpm->timestamp_lastaction = now; + +// printf("wpm->current_state=%u, wp.seq = %d, wpm->current_wp_id=%d\n", wpm->current_state, wp.seq, wpm->current_wp_id); + +// wpm->current_state = MAVLINK_WPM_STATE_GETLIST;//removeme debug XXX TODO + + //ensure that we are in the correct state and that the first waypoint has id 0 and the following waypoints have the correct ids + if ((wpm->current_state == MAVLINK_WPM_STATE_GETLIST && wp.seq == 0) || (wpm->current_state == MAVLINK_WPM_STATE_GETLIST_GETWPS && wp.seq == wpm->current_wp_id && wp.seq < wpm->current_count)) { + //mavlink_missionlib_send_gcs_string("DEBUG 2"); + +// if (verbose && wpm->current_state == MAVLINK_WPM_STATE_GETLIST) // printf("Got MAVLINK_MSG_ID_MISSION_ITEM %u from %u changing state to MAVLINK_WPM_STATE_GETLIST_GETWPS\n", wp.seq, msg->sysid); +// if (verbose && wpm->current_state == MAVLINK_WPM_STATE_GETLIST_GETWPS && wp.seq == wpm->current_wp_id) // printf("Got MAVLINK_MSG_ID_MISSION_ITEM %u from %u\n", wp.seq, msg->sysid); +// if (verbose && wpm->current_state == MAVLINK_WPM_STATE_GETLIST_GETWPS && wp.seq-1 == wpm->current_wp_id) // printf("Got MAVLINK_MSG_ID_MISSION_ITEM %u (again) from %u\n", wp.seq, msg->sysid); +// + wpm->current_state = MAVLINK_WPM_STATE_GETLIST_GETWPS; + mavlink_mission_item_t *newwp = &(wpm->rcv_waypoints[wp.seq]); + memcpy(newwp, &wp, sizeof(mavlink_mission_item_t)); +// printf("WP seq: %d\n",wp.seq); + wpm->current_wp_id = wp.seq + 1; + + // if (verbose) // printf ("Added new waypoint to list. X= %f\t Y= %f\t Z= %f\t Yaw= %f\n", newwp->x, newwp->y, newwp->z, newwp->param4); +// printf ("Added new waypoint to list. X= %f\t Y= %f\t Z= %f\t Yaw= %f\n", newwp->x, newwp->y, newwp->z, newwp->param4); + +// printf ("wpm->current_wp_id =%d, wpm->current_count=%d\n\n", wpm->current_wp_id, wpm->current_count); + if (wpm->current_wp_id == wpm->current_count && wpm->current_state == MAVLINK_WPM_STATE_GETLIST_GETWPS) { + mavlink_missionlib_send_gcs_string("GOT ALL WPS"); + // if (verbose) // printf("Got all %u waypoints, changing state to MAVLINK_WPM_STATE_IDLE\n", wpm->current_count); + + mavlink_wpm_send_waypoint_ack(wpm->current_partner_sysid, wpm->current_partner_compid, 0); + + if (wpm->current_active_wp_id > wpm->rcv_size - 1) { + wpm->current_active_wp_id = wpm->rcv_size - 1; + } + + // switch the waypoints list + // FIXME CHECK!!! + uint32_t i; + + for (i = 0; i < wpm->current_count; ++i) { + wpm->waypoints[i] = wpm->rcv_waypoints[i]; + } + + wpm->size = wpm->current_count; + + //get the new current waypoint + + for (i = 0; i < wpm->size; i++) { + if (wpm->waypoints[i].current == 1) { + wpm->current_active_wp_id = i; + //// if (verbose) // printf("New current waypoint %u\n", current_active_wp_id); + wpm->yaw_reached = false; + wpm->pos_reached = false; + mavlink_wpm_send_waypoint_current(wpm->current_active_wp_id); + mavlink_wpm_send_setpoint(wpm->current_active_wp_id); + wpm->timestamp_firstinside_orbit = 0; + break; + } + } + + if (i == wpm->size) { + wpm->current_active_wp_id = -1; + wpm->yaw_reached = false; + wpm->pos_reached = false; + wpm->timestamp_firstinside_orbit = 0; + } + + wpm->current_state = MAVLINK_WPM_STATE_IDLE; + + } else { + mavlink_wpm_send_waypoint_request(wpm->current_partner_sysid, wpm->current_partner_compid, wpm->current_wp_id); + } + + } else { + if (wpm->current_state == MAVLINK_WPM_STATE_IDLE) { + //we're done receiving waypoints, answer with ack. + mavlink_wpm_send_waypoint_ack(wpm->current_partner_sysid, wpm->current_partner_compid, 0); + printf("Received MAVLINK_MSG_ID_MISSION_ITEM while state=MAVLINK_WPM_STATE_IDLE, answered with WAYPOINT_ACK.\n"); + } + + // if (verbose) + { + if (!(wpm->current_state == MAVLINK_WPM_STATE_GETLIST || wpm->current_state == MAVLINK_WPM_STATE_GETLIST_GETWPS)) { +// printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM %u because i'm doing something else already (state=%i).\n", wp.seq, wpm->current_state); + break; + + } else if (wpm->current_state == MAVLINK_WPM_STATE_GETLIST) { + if (!(wp.seq == 0)) { +// printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM because the first waypoint ID (%u) was not 0.\n", wp.seq); + } else { +// printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM %u - FIXME: missed error description\n", wp.seq); + } + } else if (wpm->current_state == MAVLINK_WPM_STATE_GETLIST_GETWPS) { + if (!(wp.seq == wpm->current_wp_id)) { +// printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM because the waypoint ID (%u) was not the expected %u.\n", wp.seq, wpm->current_wp_id); + mavlink_wpm_send_waypoint_request(wpm->current_partner_sysid, wpm->current_partner_compid, wpm->current_wp_id); + + } else if (!(wp.seq < wpm->current_count)) { +// printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM because the waypoint ID (%u) was out of bounds.\n", wp.seq); + } else { +// printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM %u - FIXME: missed error description\n", wp.seq); + } + } else { +// printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM %u - FIXME: missed error description\n", wp.seq); + } + } + } + } else { + //we we're target but already communicating with someone else + if ((wp.target_system == mavlink_system.sysid /*&& wp.target_component == mavlink_wpm_comp_id*/) && !(msg->sysid == wpm->current_partner_sysid && msg->compid == wpm->current_partner_compid) && wpm->current_state != MAVLINK_WPM_STATE_IDLE) { + // if (verbose) // printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM %u from ID %u because i'm already talking to ID %u.\n", wp.seq, msg->sysid, wpm->current_partner_sysid); + } else if (wp.target_system == mavlink_system.sysid /* && wp.target_component == mavlink_wpm_comp_id*/) { + // if (verbose) // printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM %u from ID %u because i have no idea what to do with it\n", wp.seq, msg->sysid); + } + } + + break; + } + + case MAVLINK_MSG_ID_MISSION_CLEAR_ALL: { + mavlink_mission_clear_all_t wpca; + mavlink_msg_mission_clear_all_decode(msg, &wpca); + + if (wpca.target_system == mavlink_system.sysid /*&& wpca.target_component == mavlink_wpm_comp_id */ && wpm->current_state == MAVLINK_WPM_STATE_IDLE) { + wpm->timestamp_lastaction = now; + + // if (verbose) // printf("Got MAVLINK_MSG_ID_MISSION_ITEM_CLEAR_LIST from %u deleting all waypoints\n", msg->sysid); + // Delete all waypoints + wpm->size = 0; + wpm->current_active_wp_id = -1; + wpm->yaw_reached = false; + wpm->pos_reached = false; + + } else if (wpca.target_system == mavlink_system.sysid /*&& wpca.target_component == mavlink_wpm_comp_id */ && wpm->current_state != MAVLINK_WPM_STATE_IDLE) { + // if (verbose) // printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_CLEAR_LIST from %u because i'm doing something else already (state=%i).\n", msg->sysid, wpm->current_state); + } + + break; + } + + default: { + // if (debug) // printf("Waypoint: received message of unknown type"); + break; + } + } + + check_waypoints_reached(now, global_pos, local_pos); +} |