diff options
Diffstat (limited to 'src/modules/px4iofirmware/mixer.cpp')
-rw-r--r-- | src/modules/px4iofirmware/mixer.cpp | 67 |
1 files changed, 35 insertions, 32 deletions
diff --git a/src/modules/px4iofirmware/mixer.cpp b/src/modules/px4iofirmware/mixer.cpp index 17751bd6d..3e19333d8 100644 --- a/src/modules/px4iofirmware/mixer.cpp +++ b/src/modules/px4iofirmware/mixer.cpp @@ -58,7 +58,7 @@ extern "C" { /* * Maximum interval in us before FMU signal is considered lost */ -#define FMU_INPUT_DROP_LIMIT_US 200000 +#define FMU_INPUT_DROP_LIMIT_US 500000 /* XXX need to move the RC_CHANNEL_FUNCTION out of rc_channels.h and into systemlib */ #define ROLL 0 @@ -71,7 +71,6 @@ extern "C" { static bool mixer_servos_armed = false; static bool should_arm = false; static bool should_always_enable_pwm = false; -static bool input_valid_initialized = false; /* the input was valid at least once */ static volatile bool in_mixer = false; /* selected control values and count for mixing */ @@ -99,7 +98,8 @@ mixer_tick(void) { /* check that we are receiving fresh data from the FMU */ - if (hrt_elapsed_time(&system_state.fmu_data_received_time) > FMU_INPUT_DROP_LIMIT_US) { + if ((system_state.fmu_data_received_time == 0) || + hrt_elapsed_time(&system_state.fmu_data_received_time) > FMU_INPUT_DROP_LIMIT_US) { /* too long without FMU input, time to go to failsafe */ if (r_status_flags & PX4IO_P_STATUS_FLAGS_FMU_OK) { @@ -110,6 +110,9 @@ mixer_tick(void) } else { r_status_flags |= PX4IO_P_STATUS_FLAGS_FMU_OK; + + /* this flag is never cleared once OK */ + r_status_flags |= PX4IO_P_STATUS_FLAGS_FMU_INITIALIZED; } /* default to failsafe mixing - it will be forced below if flag is set */ @@ -158,13 +161,40 @@ mixer_tick(void) } /* + * Decide whether the servos should be armed right now. + * + * We must be armed, and we must have a PWM source; either raw from + * FMU or from the mixer. + * + */ + should_arm = ( + /* IO initialised without error */ (r_status_flags & PX4IO_P_STATUS_FLAGS_INIT_OK) + /* and IO is armed */ && (r_status_flags & PX4IO_P_STATUS_FLAGS_SAFETY_OFF) + /* and FMU is armed */ && ( + ((r_setup_arming & PX4IO_P_SETUP_ARMING_FMU_ARMED) + /* and there is valid input via or mixer */ && (r_status_flags & PX4IO_P_STATUS_FLAGS_MIXER_OK) ) + /* or direct PWM is set */ || (r_status_flags & PX4IO_P_STATUS_FLAGS_RAW_PWM) + /* or failsafe was set manually */ || ((r_setup_arming & PX4IO_P_SETUP_ARMING_FAILSAFE_CUSTOM) && !(r_status_flags & PX4IO_P_STATUS_FLAGS_FMU_OK)) + ) + ); + + should_always_enable_pwm = (r_setup_arming & PX4IO_P_SETUP_ARMING_ALWAYS_PWM_ENABLE) + && (r_status_flags & PX4IO_P_STATUS_FLAGS_INIT_OK) + && (r_status_flags & PX4IO_P_STATUS_FLAGS_FMU_OK); + + /* * Check if failsafe termination is set - if yes, * set the force failsafe flag once entering the first * failsafe condition. */ - if ((r_setup_arming & PX4IO_P_SETUP_ARMING_TERMINATION_FAILSAFE) && + if ( /* if we have requested flight termination style failsafe (noreturn) */ + (r_setup_arming & PX4IO_P_SETUP_ARMING_TERMINATION_FAILSAFE) && + /* and we ended up in a failsafe condition */ (source == MIX_FAILSAFE) && - input_valid_initialized) { + /* and we should be armed, so we intended to provide outputs */ + should_arm && + /* and FMU is initialized */ + (r_status_flags & PX4IO_P_STATUS_FLAGS_FMU_INITIALIZED)) { r_setup_arming |= PX4IO_P_SETUP_ARMING_FORCE_FAILSAFE; } @@ -182,36 +212,9 @@ mixer_tick(void) r_status_flags |= PX4IO_P_STATUS_FLAGS_FAILSAFE; } else { r_status_flags &= ~(PX4IO_P_STATUS_FLAGS_FAILSAFE); - - /* we got valid input, kick off the full failsafe checks */ - input_valid_initialized = true; } /* - * Decide whether the servos should be armed right now. - * - * We must be armed, and we must have a PWM source; either raw from - * FMU or from the mixer. - * - * XXX correct behaviour for failsafe may require an additional case - * here. - */ - should_arm = ( - /* IO initialised without error */ (r_status_flags & PX4IO_P_STATUS_FLAGS_INIT_OK) - /* and IO is armed */ && (r_status_flags & PX4IO_P_STATUS_FLAGS_SAFETY_OFF) - /* and FMU is armed */ && ( - ((r_setup_arming & PX4IO_P_SETUP_ARMING_FMU_ARMED) - /* and there is valid input via or mixer */ && (r_status_flags & PX4IO_P_STATUS_FLAGS_MIXER_OK) ) - /* or direct PWM is set */ || (r_status_flags & PX4IO_P_STATUS_FLAGS_RAW_PWM) - /* or failsafe was set manually */ || ((r_setup_arming & PX4IO_P_SETUP_ARMING_FAILSAFE_CUSTOM) && !(r_status_flags & PX4IO_P_STATUS_FLAGS_FMU_OK)) - ) - ); - - should_always_enable_pwm = (r_setup_arming & PX4IO_P_SETUP_ARMING_ALWAYS_PWM_ENABLE) - && (r_status_flags & PX4IO_P_STATUS_FLAGS_INIT_OK) - && (r_status_flags & PX4IO_P_STATUS_FLAGS_FMU_OK); - - /* * Run the mixers. */ if (source == MIX_FAILSAFE) { |