diff options
Diffstat (limited to 'src/modules/px4iofirmware/protocol.h')
-rw-r--r-- | src/modules/px4iofirmware/protocol.h | 5 |
1 files changed, 5 insertions, 0 deletions
diff --git a/src/modules/px4iofirmware/protocol.h b/src/modules/px4iofirmware/protocol.h index d5a6b1ec4..050783687 100644 --- a/src/modules/px4iofirmware/protocol.h +++ b/src/modules/px4iofirmware/protocol.h @@ -179,6 +179,7 @@ #define PX4IO_P_SETUP_ARMING_ALWAYS_PWM_ENABLE (1 << 5) /* Output of PWM right after startup enabled to help ESCs initialize and prevent them from beeping */ #define PX4IO_P_SETUP_ARMING_RC_HANDLING_DISABLED (1 << 6) /* Disable the IO-internal evaluation of the RC */ #define PX4IO_P_SETUP_ARMING_LOCKDOWN (1 << 7) /* If set, the system operates normally, but won't actuate any servos */ +#define PX4IO_P_SETUP_ARMING_FORCE_FAILSAFE (1 << 8) /* If set, the system will always output the failsafe values */ #define PX4IO_P_SETUP_PWM_RATES 2 /* bitmask, 0 = low rate, 1 = high rate */ #define PX4IO_P_SETUP_PWM_DEFAULTRATE 3 /* 'low' PWM frame output rate in Hz */ @@ -253,6 +254,10 @@ enum { /* DSM bind states */ /* PWM failsafe values - zero disables the output */ #define PX4IO_PAGE_FAILSAFE_PWM 55 /**< 0..CONFIG_ACTUATOR_COUNT-1 */ +/* PWM failsafe values - zero disables the output */ +#define PX4IO_PAGE_SENSORS 56 /**< Sensors connected to PX4IO */ +#define PX4IO_P_SENSORS_ALTITUDE 0 /**< Altitude of an external sensor (HoTT or S.BUS2) */ + /* Debug and test page - not used in normal operation */ #define PX4IO_PAGE_TEST 127 #define PX4IO_P_TEST_LED 0 /**< set the amber LED on/off */ |