diff options
Diffstat (limited to 'src/modules/px4iofirmware/protocol.h')
-rw-r--r-- | src/modules/px4iofirmware/protocol.h | 9 |
1 files changed, 9 insertions, 0 deletions
diff --git a/src/modules/px4iofirmware/protocol.h b/src/modules/px4iofirmware/protocol.h index 674f9dddd..6ee5c2834 100644 --- a/src/modules/px4iofirmware/protocol.h +++ b/src/modules/px4iofirmware/protocol.h @@ -105,6 +105,7 @@ #define PX4IO_P_STATUS_FLAGS_ARM_SYNC (1 << 9) /* the arming state between IO and FMU is in sync */ #define PX4IO_P_STATUS_FLAGS_INIT_OK (1 << 10) /* initialisation of the IO completed without error */ #define PX4IO_P_STATUS_FLAGS_FAILSAFE (1 << 11) /* failsafe is active */ +#define PX4IO_P_STATUS_FLAGS_RC_DSM11 (1 << 12) /* DSM input is 11 bit data */ #define PX4IO_P_STATUS_ALARMS 3 /* alarm flags - alarms latch, write 1 to a bit to clear it */ #define PX4IO_P_STATUS_ALARMS_VBATT_LOW (1 << 0) /* VBatt is very close to regulator dropout */ @@ -157,6 +158,14 @@ #define PX4IO_P_SETUP_PWM_ALTRATE 4 /* 'high' PWM frame output rate in Hz */ #define PX4IO_P_SETUP_RELAYS 5 /* bitmask of relay/switch outputs, 0 = off, 1 = on */ #define PX4IO_P_SETUP_VBATT_SCALE 6 /* battery voltage correction factor (float) */ +#define PX4IO_P_SETUP_DSM 7 /* DSM bind state */ +enum { /* DSM bind states */ + dsm_bind_power_down = 0, + dsm_bind_power_up, + dsm_bind_set_rx_out, + dsm_bind_send_pulses, + dsm_bind_reinit_uart +}; #define PX4IO_P_SETUP_SET_DEBUG 9 /* debug level for IO board */ /* autopilot control values, -10000..10000 */ |