diff options
Diffstat (limited to 'src/modules/segway')
-rw-r--r-- | src/modules/segway/BlockSegwayController.cpp | 56 | ||||
-rw-r--r-- | src/modules/segway/BlockSegwayController.hpp | 18 | ||||
-rw-r--r-- | src/modules/segway/module.mk | 42 | ||||
-rw-r--r-- | src/modules/segway/params.c | 72 | ||||
-rw-r--r-- | src/modules/segway/segway_main.cpp | 173 |
5 files changed, 361 insertions, 0 deletions
diff --git a/src/modules/segway/BlockSegwayController.cpp b/src/modules/segway/BlockSegwayController.cpp new file mode 100644 index 000000000..b7a0bbbcc --- /dev/null +++ b/src/modules/segway/BlockSegwayController.cpp @@ -0,0 +1,56 @@ +#include "BlockSegwayController.hpp" + +void BlockSegwayController::update() { + // wait for a sensor update, check for exit condition every 100 ms + if (poll(&_attPoll, 1, 100) < 0) return; // poll error + + uint64_t newTimeStamp = hrt_absolute_time(); + float dt = (newTimeStamp - _timeStamp) / 1.0e6f; + _timeStamp = newTimeStamp; + + // check for sane values of dt + // to prevent large control responses + if (dt > 1.0f || dt < 0) return; + + // set dt for all child blocks + setDt(dt); + + // check for new updates + if (_param_update.updated()) updateParams(); + + // get new information from subscriptions + updateSubscriptions(); + + // default all output to zero unless handled by mode + for (unsigned i = 2; i < NUM_ACTUATOR_CONTROLS; i++) + _actuators.control[i] = 0.0f; + + // only update guidance in auto mode + if (_status.state_machine == SYSTEM_STATE_AUTO) { + // update guidance + } + + // XXX handle STABILIZED (loiter on spot) as well + // once the system switches from manual or auto to stabilized + // the setpoint should update to loitering around this position + + // handle autopilot modes + if (_status.state_machine == SYSTEM_STATE_AUTO || + _status.state_machine == SYSTEM_STATE_STABILIZED) { + + float spdCmd = phi2spd.update(_att.phi); + + // output + _actuators.control[0] = spdCmd; + _actuators.control[1] = spdCmd; + + } else if (_status.state_machine == SYSTEM_STATE_MANUAL) { + _actuators.control[0] = _manual.roll; + _actuators.control[1] = _manual.roll; + } + + // update all publications + updatePublications(); + +} + diff --git a/src/modules/segway/BlockSegwayController.hpp b/src/modules/segway/BlockSegwayController.hpp new file mode 100644 index 000000000..b16d38338 --- /dev/null +++ b/src/modules/segway/BlockSegwayController.hpp @@ -0,0 +1,18 @@ +#pragma once + +#include <controllib/uorb/blocks.hpp> + +using namespace control; + +class BlockSegwayController : public control::BlockUorbEnabledAutopilot { +public: + BlockSegwayController() : + BlockUorbEnabledAutopilot(NULL,"SEG"), + phi2spd(this, "PHI2SPD") + { + } + void update(); +private: + BlockP phi2spd; +}; + diff --git a/src/modules/segway/module.mk b/src/modules/segway/module.mk new file mode 100644 index 000000000..d5da85601 --- /dev/null +++ b/src/modules/segway/module.mk @@ -0,0 +1,42 @@ +############################################################################ +# +# Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name PX4 nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +# +# segway controller +# + +MODULE_COMMAND = segway + +SRCS = segway_main.cpp \ + BlockSegwayController.cpp \ + params.c diff --git a/src/modules/segway/params.c b/src/modules/segway/params.c new file mode 100644 index 000000000..db30af416 --- /dev/null +++ b/src/modules/segway/params.c @@ -0,0 +1,72 @@ +#include <systemlib/param/param.h> + +// currently tuned for easystar from arkhangar in HIL +//https://github.com/arktools/arkhangar + +// 16 is max name length + +// gyro low pass filter +PARAM_DEFINE_FLOAT(FWB_P_LP, 300.0f); // roll rate low pass cut freq +PARAM_DEFINE_FLOAT(FWB_Q_LP, 300.0f); // pitch rate low pass cut freq +PARAM_DEFINE_FLOAT(FWB_R_LP, 300.0f); // yaw rate low pass cut freq + +// yaw washout +PARAM_DEFINE_FLOAT(FWB_R_HP, 1.0f); // yaw rate high pass + +// stabilization mode +PARAM_DEFINE_FLOAT(FWB_P2AIL, 0.3f); // roll rate 2 aileron +PARAM_DEFINE_FLOAT(FWB_Q2ELV, 0.1f); // pitch rate 2 elevator +PARAM_DEFINE_FLOAT(FWB_R2RDR, 0.1f); // yaw rate 2 rudder + +// psi -> phi -> p +PARAM_DEFINE_FLOAT(FWB_PSI2PHI, 0.5f); // heading 2 roll +PARAM_DEFINE_FLOAT(FWB_PHI2P, 1.0f); // roll to roll rate +PARAM_DEFINE_FLOAT(FWB_PHI_LIM_MAX, 0.3f); // roll limit, 28 deg + +// velocity -> theta +PARAM_DEFINE_FLOAT(FWB_V2THE_P, 1.0f); // velocity to pitch angle PID, prop gain +PARAM_DEFINE_FLOAT(FWB_V2THE_I, 0.0f); // integral gain +PARAM_DEFINE_FLOAT(FWB_V2THE_D, 0.0f); // derivative gain +PARAM_DEFINE_FLOAT(FWB_V2THE_D_LP, 0.0f); // derivative low-pass +PARAM_DEFINE_FLOAT(FWB_V2THE_I_MAX, 0.0f); // integrator wind up guard +PARAM_DEFINE_FLOAT(FWB_THE_MIN, -0.5f); // the max commanded pitch angle +PARAM_DEFINE_FLOAT(FWB_THE_MAX, 0.5f); // the min commanded pitch angle + + +// theta -> q +PARAM_DEFINE_FLOAT(FWB_THE2Q_P, 1.0f); // pitch angle to pitch-rate PID +PARAM_DEFINE_FLOAT(FWB_THE2Q_I, 0.0f); +PARAM_DEFINE_FLOAT(FWB_THE2Q_D, 0.0f); +PARAM_DEFINE_FLOAT(FWB_THE2Q_D_LP, 0.0f); +PARAM_DEFINE_FLOAT(FWB_THE2Q_I_MAX, 0.0f); + +// h -> thr +PARAM_DEFINE_FLOAT(FWB_H2THR_P, 0.01f); // altitude to throttle PID +PARAM_DEFINE_FLOAT(FWB_H2THR_I, 0.0f); +PARAM_DEFINE_FLOAT(FWB_H2THR_D, 0.0f); +PARAM_DEFINE_FLOAT(FWB_H2THR_D_LP, 0.0f); +PARAM_DEFINE_FLOAT(FWB_H2THR_I_MAX, 0.0f); + +// crosstrack +PARAM_DEFINE_FLOAT(FWB_XT2YAW_MAX, 1.57f); // cross-track to yaw angle limit 90 deg +PARAM_DEFINE_FLOAT(FWB_XT2YAW, 0.005f); // cross-track to yaw angle gain + +// speed command +PARAM_DEFINE_FLOAT(FWB_V_MIN, 10.0f); // minimum commanded velocity +PARAM_DEFINE_FLOAT(FWB_V_CMD, 12.0f); // commanded velocity +PARAM_DEFINE_FLOAT(FWB_V_MAX, 16.0f); // maximum commanded velocity + +// rate of climb +// this is what rate of climb is commanded (in m/s) +// when the pitch stick is fully defelcted in simple mode +PARAM_DEFINE_FLOAT(FWB_CR_MAX, 1.0f); + +// climb rate -> thr +PARAM_DEFINE_FLOAT(FWB_CR2THR_P, 0.01f); // rate of climb to throttle PID +PARAM_DEFINE_FLOAT(FWB_CR2THR_I, 0.0f); +PARAM_DEFINE_FLOAT(FWB_CR2THR_D, 0.0f); +PARAM_DEFINE_FLOAT(FWB_CR2THR_D_LP, 0.0f); +PARAM_DEFINE_FLOAT(FWB_CR2THR_I_MAX, 0.0f); + +PARAM_DEFINE_FLOAT(FWB_TRIM_THR, 0.8f); // trim throttle (0,1) +PARAM_DEFINE_FLOAT(FWB_TRIM_V, 12.0f); // trim velocity, m/s diff --git a/src/modules/segway/segway_main.cpp b/src/modules/segway/segway_main.cpp new file mode 100644 index 000000000..8be1cc7aa --- /dev/null +++ b/src/modules/segway/segway_main.cpp @@ -0,0 +1,173 @@ +/**************************************************************************** + * + * Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved. + * Author: James Goppert + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file segway_main.cpp + * @author James Goppert + * + * Segway controller using control library + */ + +#include <nuttx/config.h> +#include <unistd.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <systemlib/systemlib.h> +#include <systemlib/param/param.h> +#include <systemlib/err.h> +#include <drivers/drv_hrt.h> +#include <math.h> + +#include "BlockSegwayController.hpp" + +static bool thread_should_exit = false; /**< Deamon exit flag */ +static bool thread_running = false; /**< Deamon status flag */ +static int deamon_task; /**< Handle of deamon task / thread */ + +/** + * Deamon management function. + */ +extern "C" __EXPORT int segway_main(int argc, char *argv[]); + +/** + * Mainloop of deamon. + */ +int control_demo_thread_main(int argc, char *argv[]); + +/** + * Test function + */ +void test(); + +/** + * Print the correct usage. + */ +static void usage(const char *reason); + +static void +usage(const char *reason) +{ + if (reason) + fprintf(stderr, "%s\n", reason); + + fprintf(stderr, "usage: segway {start|stop|status} [-p <additional params>]\n\n"); + exit(1); +} + +/** + * The deamon app only briefly exists to start + * the background job. The stack size assigned in the + * Makefile does only apply to this management task. + * + * The actual stack size should be set in the call + * to task_create(). + */ +int segway_main(int argc, char *argv[]) +{ + + if (argc < 1) + usage("missing command"); + + if (!strcmp(argv[1], "start")) { + + if (thread_running) { + warnx("already running"); + /* this is not an error */ + exit(0); + } + + thread_should_exit = false; + + deamon_task = task_spawn_cmd("segway", + SCHED_DEFAULT, + SCHED_PRIORITY_MAX - 10, + 5120, + control_demo_thread_main, + (argv) ? (const char **)&argv[2] : (const char **)NULL); + exit(0); + } + + if (!strcmp(argv[1], "test")) { + test(); + exit(0); + } + + if (!strcmp(argv[1], "stop")) { + thread_should_exit = true; + exit(0); + } + + if (!strcmp(argv[1], "status")) { + if (thread_running) { + warnx("is running"); + + } else { + warnx("not started"); + } + + exit(0); + } + + usage("unrecognized command"); + exit(1); +} + +int control_demo_thread_main(int argc, char *argv[]) +{ + + warnx("starting"); + + using namespace control; + + BlockSegwayController autopilot; + + thread_running = true; + + while (!thread_should_exit) { + autopilot.update(); + } + + warnx("exiting."); + + thread_running = false; + + return 0; +} + +void test() +{ + warnx("beginning control lib test"); + control::basicBlocksTest(); +} |