diff options
Diffstat (limited to 'src/modules/systemlib/otp.h')
-rw-r--r-- | src/modules/systemlib/otp.h | 151 |
1 files changed, 151 insertions, 0 deletions
diff --git a/src/modules/systemlib/otp.h b/src/modules/systemlib/otp.h new file mode 100644 index 000000000..f10e129d8 --- /dev/null +++ b/src/modules/systemlib/otp.h @@ -0,0 +1,151 @@ +/**************************************************************************** + * + * Copyright (c) 2012-2014 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file otp.h + * One TIme Programmable ( OTP ) Flash routine/s. + * + * @author Lorenz Meier <lm@inf.ethz.ch> + * @author David "Buzz" Bussenschutt <davidbuzz@gmail.com> + * + */ + +#ifndef OTP_H_ +#define OTP_H_ + +__BEGIN_DECLS + +#define ADDR_OTP_START 0x1FFF7800 +#define ADDR_OTP_LOCK_START 0x1FFF7A00 + +#define OTP_LOCK_LOCKED 0x00 +#define OTP_LOCK_UNLOCKED 0xFF + + + +#include <unistd.h> +#include <stdio.h> + +// possible flash statuses +#define F_BUSY 1 +#define F_ERROR_WRP 2 +#define F_ERROR_PROGRAM 3 +#define F_ERROR_OPERATION 4 +#define F_COMPLETE 5 + +typedef struct { + volatile uint32_t accesscontrol; // 0x00 + volatile uint32_t key; // 0x04 + volatile uint32_t optionkey; // 0x08 + volatile uint32_t status; // 0x0C + volatile uint32_t control; // 0x10 + volatile uint32_t optioncontrol; //0x14 +} flash_registers; + +#define PERIPH_BASE ((uint32_t)0x40000000) //Peripheral base address +#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000) +#define F_R_BASE (AHB1PERIPH_BASE + 0x3C00) +#define FLASH ((flash_registers *) F_R_BASE) + +#define F_BSY ((uint32_t)0x00010000) //FLASH Busy flag bit +#define F_OPERR ((uint32_t)0x00000002) //FLASH operation Error flag bit +#define F_WRPERR ((uint32_t)0x00000010) //FLASH Write protected error flag bit +#define CR_PSIZE_MASK ((uint32_t)0xFFFFFCFF) +#define F_PSIZE_WORD ((uint32_t)0x00000200) +#define F_PSIZE_BYTE ((uint32_t)0x00000000) +#define F_CR_PG ((uint32_t)0x00000001) // a bit in the F_CR register +#define F_CR_LOCK ((uint32_t)0x80000000) // also another bit. + +#define F_KEY1 ((uint32_t)0x45670123) +#define F_KEY2 ((uint32_t)0xCDEF89AB) +#define IS_F_ADDRESS(ADDRESS) ((((ADDRESS) >= 0x08000000) && ((ADDRESS) < 0x080FFFFF)) || (((ADDRESS) >= 0x1FFF7800) && ((ADDRESS) < 0x1FFF7A0F))) + + + +#pragma pack(push, 1) + +/* + * The OTP area is divided into 16 OTP data blocks of 32 bytes and one lock OTP block of 16 bytes. + * The OTP data and lock blocks cannot be erased. The lock block contains 16 bytes LOCKBi (0 ≤ i ≤ 15) + * to lock the corresponding OTP data block (blocks 0 to 15). Each OTP data block can be programmed + * until the value 0x00 is programmed in the corresponding OTP lock byte. The lock bytes must only + * contain 0x00 and 0xFF values, otherwise the OTP bytes might not be taken into account correctly. + */ + +struct otp { + // first 32 bytes = the '0' Block + char id[4]; ///4 bytes < 'P' 'X' '4' '\n' + uint8_t id_type; ///1 byte < 0 for USB VID, 1 for generic VID + uint32_t vid; ///4 bytes + uint32_t pid; ///4 bytes + char unused[19]; ///19 bytes + // Cert-of-Auth is next 4 blocks ie 1-4 ( where zero is first block ) + char signature[128]; + // insert extras here + uint32_t lock_bytes[4]; +}; + +struct otp_lock { + uint8_t lock_bytes[16]; +}; +#pragma pack(pop) + +#define ADDR_F_SIZE 0x1FFF7A22 + +#pragma pack(push, 1) +union udid { + uint32_t serial[3]; + char data[12]; +}; +#pragma pack(pop) + + +/** + * s + */ +//__EXPORT float calc_indicated_airspeed(float differential_pressure); + +__EXPORT void F_unlock(void); +__EXPORT void F_lock(void); +__EXPORT int val_read(void *dest, volatile const void *src, int bytes); +__EXPORT int val_write(volatile void *dest, const void *src, int bytes); +__EXPORT int write_otp(uint8_t id_type, uint32_t vid, uint32_t pid, char *signature); +__EXPORT int lock_otp(void); + + +__EXPORT int F_write_byte(uint32_t Address, uint8_t Data); +__EXPORT int F_write_word(uint32_t Address, uint32_t Data); + +__END_DECLS + +#endif |