1 files changed, 1 insertions, 0 deletions
diff --git a/src/modules/uORB/topics/vehicle_command.h b/src/modules/uORB/topics/vehicle_command.h
index c21a29b13..7db33d98b 100644
--- a/src/modules/uORB/topics/vehicle_command.h
+++ b/src/modules/uORB/topics/vehicle_command.h
@@ -76,6 +76,7 @@ enum VEHICLE_CMD {
 	VEHICLE_CMD_DO_REPEAT_RELAY = 182, /* Cycle a relay on and off for a desired number of cyles with a desired period. |Relay number| Cycle count| Cycle time (seconds, decimal)| Empty| Empty| Empty| Empty|  */
 	VEHICLE_CMD_DO_SET_SERVO = 183, /* Set a servo to a desired PWM value. |Servo number| PWM (microseconds, 1000 to 2000 typical)| Empty| Empty| Empty| Empty| Empty|  */
 	VEHICLE_CMD_DO_REPEAT_SERVO = 184, /* Cycle a between its nominal setting and a desired PWM for a desired number of cycles with a desired period. |Servo number| PWM (microseconds, 1000 to 2000 typical)| Cycle count| Cycle time (seconds)| Empty| Empty| Empty|  */
+	VEHICLE_CMD_DO_FLIGHTTERMINATION=185, /* Terminate flight immediately |Flight termination activated if > 0.5| Empty| Empty| Empty| Empty| Empty| Empty|  */
 	VEHICLE_CMD_DO_CONTROL_VIDEO = 200, /* Control onboard camera system. |Camera ID (-1 for all)| Transmission: 0: disabled, 1: enabled compressed, 2: enabled raw| Transmission mode: 0: video stream, >0: single images every n seconds (decimal)| Recording: 0: disabled, 1: enabled compressed, 2: enabled raw| Empty| Empty| Empty|  */
 	VEHICLE_CMD_DO_LAST = 240, /* NOP - This command is only used to mark the upper limit of the DO commands in the enumeration |Empty| Empty| Empty| Empty| Empty| Empty| Empty|  */
 	VEHICLE_CMD_PREFLIGHT_CALIBRATION = 241, /* Trigger calibration. This command will be only accepted if in pre-flight mode. |Gyro calibration: 0: no, 1: yes| Magnetometer calibration: 0: no, 1: yes| Ground pressure: 0: no, 1: yes| Radio calibration: 0: no, 1: yes| Accelerometer calibration: 0: no, 1: yes| Empty| Empty|  */