diff options
Diffstat (limited to 'src/modules')
42 files changed, 954 insertions, 833 deletions
diff --git a/src/modules/att_pos_estimator_ekf/KalmanNav.cpp b/src/modules/att_pos_estimator_ekf/KalmanNav.cpp index 18fb6dcbc..ecca04dd7 100644 --- a/src/modules/att_pos_estimator_ekf/KalmanNav.cpp +++ b/src/modules/att_pos_estimator_ekf/KalmanNav.cpp @@ -41,6 +41,7 @@ #include "KalmanNav.hpp" #include <systemlib/err.h> +#include <geo/geo.h> // constants // Titterton pg. 52 @@ -67,15 +68,13 @@ KalmanNav::KalmanNav(SuperBlock *parent, const char *name) : // attitude representations C_nb(), q(), - _accel_sub(-1), - _gyro_sub(-1), - _mag_sub(-1), // subscriptions _sensors(&getSubscriptions(), ORB_ID(sensor_combined), 5), // limit to 200 Hz _gps(&getSubscriptions(), ORB_ID(vehicle_gps_position), 100), // limit to 10 Hz _param_update(&getSubscriptions(), ORB_ID(parameter_update), 1000), // limit to 1 Hz // publications _pos(&getPublications(), ORB_ID(vehicle_global_position)), + _localPos(&getPublications(), ORB_ID(vehicle_local_position)), _att(&getPublications(), ORB_ID(vehicle_attitude)), // timestamps _pubTimeStamp(hrt_absolute_time()), @@ -92,6 +91,7 @@ KalmanNav::KalmanNav(SuperBlock *parent, const char *name) : phi(0), theta(0), psi(0), vN(0), vE(0), vD(0), lat(0), lon(0), alt(0), + lat0(0), lon0(0), alt0(0), // parameters for ground station _vGyro(this, "V_GYRO"), _vAccel(this, "V_ACCEL"), @@ -127,19 +127,15 @@ KalmanNav::KalmanNav(SuperBlock *parent, const char *name) : lon = 0.0f; alt = 0.0f; - // gyro, accel and mag subscriptions - _gyro_sub = orb_subscribe(ORB_ID(sensor_gyro)); - _accel_sub = orb_subscribe(ORB_ID(sensor_accel)); - _mag_sub = orb_subscribe(ORB_ID(sensor_mag)); - - struct accel_report accel; - orb_copy(ORB_ID(sensor_accel), _accel_sub, &accel); - - struct mag_report mag; - orb_copy(ORB_ID(sensor_mag), _mag_sub, &mag); - // initialize rotation quaternion with a single raw sensor measurement - q = init(accel.x, accel.y, accel.z, mag.x, mag.y, mag.z); + _sensors.update(); + q = init( + _sensors.accelerometer_m_s2[0], + _sensors.accelerometer_m_s2[1], + _sensors.accelerometer_m_s2[2], + _sensors.magnetometer_ga[0], + _sensors.magnetometer_ga[1], + _sensors.magnetometer_ga[2]); // initialize dcm C_nb = Dcm(q); @@ -252,11 +248,21 @@ void KalmanNav::update() setLatDegE7(_gps.lat); setLonDegE7(_gps.lon); setAltE3(_gps.alt); + // set reference position for + // local position + lat0 = lat; + lon0 = lon; + alt0 = alt; + // XXX map_projection has internal global + // states that multiple things could change, + // should make map_projection take reference + // lat/lon and not have init + map_projection_init(lat0, lon0); _positionInitialized = true; warnx("initialized EKF state with GPS\n"); warnx("vN: %8.4f, vE: %8.4f, vD: %8.4f, lat: %8.4f, lon: %8.4f, alt: %8.4f\n", double(vN), double(vE), double(vD), - lat, lon, alt); + lat, lon, double(alt)); } // prediction step @@ -311,7 +317,7 @@ void KalmanNav::updatePublications() { using namespace math; - // position publication + // global position publication _pos.timestamp = _pubTimeStamp; _pos.time_gps_usec = _gps.timestamp_position; _pos.valid = true; @@ -324,6 +330,31 @@ void KalmanNav::updatePublications() _pos.vz = vD; _pos.yaw = psi; + // local position publication + float x; + float y; + bool landed = alt < (alt0 + 0.1); // XXX improve? + map_projection_project(lat, lon, &x, &y); + _localPos.timestamp = _pubTimeStamp; + _localPos.xy_valid = true; + _localPos.z_valid = true; + _localPos.v_xy_valid = true; + _localPos.v_z_valid = true; + _localPos.x = x; + _localPos.y = y; + _localPos.z = alt0 - alt; + _localPos.vx = vN; + _localPos.vy = vE; + _localPos.vz = vD; + _localPos.yaw = psi; + _localPos.xy_global = true; + _localPos.z_global = true; + _localPos.ref_timestamp = _pubTimeStamp; + _localPos.ref_lat = getLatDegE7(); + _localPos.ref_lon = getLonDegE7(); + _localPos.ref_alt = 0; + _localPos.landed = landed; + // attitude publication _att.timestamp = _pubTimeStamp; _att.roll = phi; @@ -347,8 +378,10 @@ void KalmanNav::updatePublications() // selectively update publications, // do NOT call superblock do-all method - if (_positionInitialized) + if (_positionInitialized) { _pos.update(); + _localPos.update(); + } if (_attitudeInitialized) _att.update(); diff --git a/src/modules/att_pos_estimator_ekf/KalmanNav.hpp b/src/modules/att_pos_estimator_ekf/KalmanNav.hpp index 799fc2fb9..a69bde1a6 100644 --- a/src/modules/att_pos_estimator_ekf/KalmanNav.hpp +++ b/src/modules/att_pos_estimator_ekf/KalmanNav.hpp @@ -52,6 +52,7 @@ #include <uORB/topics/vehicle_attitude.h> #include <uORB/topics/vehicle_global_position.h> +#include <uORB/topics/vehicle_local_position.h> #include <uORB/topics/sensor_combined.h> #include <uORB/topics/vehicle_gps_position.h> #include <uORB/topics/parameter_update.h> @@ -142,12 +143,8 @@ protected: control::UOrbSubscription<parameter_update_s> _param_update; /**< parameter update sub. */ // publications control::UOrbPublication<vehicle_global_position_s> _pos; /**< position pub. */ + control::UOrbPublication<vehicle_local_position_s> _localPos; /**< local position pub. */ control::UOrbPublication<vehicle_attitude_s> _att; /**< attitude pub. */ - - int _accel_sub; /**< Accelerometer subscription */ - int _gyro_sub; /**< Gyroscope subscription */ - int _mag_sub; /**< Magnetometer subscription */ - // time stamps uint64_t _pubTimeStamp; /**< output data publication time stamp */ uint64_t _predictTimeStamp; /**< prediction time stamp */ @@ -164,8 +161,10 @@ protected: float phi, theta, psi; /**< 3-2-1 euler angles */ float vN, vE, vD; /**< navigation velocity, m/s */ double lat, lon; /**< lat, lon radians */ - float alt; /**< altitude, meters */ // parameters + float alt; /**< altitude, meters */ + double lat0, lon0; /**< reference latitude and longitude */ + float alt0; /**< refeerence altitude (ground height) */ control::BlockParamFloat _vGyro; /**< gyro process noise */ control::BlockParamFloat _vAccel; /**< accelerometer process noise */ control::BlockParamFloat _rMag; /**< magnetometer measurement noise */ diff --git a/src/modules/attitude_estimator_ekf/attitude_estimator_ekf_params.c b/src/modules/attitude_estimator_ekf/attitude_estimator_ekf_params.c index 52dac652b..3cfddf28e 100755 --- a/src/modules/attitude_estimator_ekf/attitude_estimator_ekf_params.c +++ b/src/modules/attitude_estimator_ekf/attitude_estimator_ekf_params.c @@ -52,11 +52,13 @@ PARAM_DEFINE_FLOAT(EKF_ATT_V3_Q3, 0.005f); PARAM_DEFINE_FLOAT(EKF_ATT_V3_Q4, 0.0f); /* gyro measurement noise */ -PARAM_DEFINE_FLOAT(EKF_ATT_V3_R0, 0.0008f); -PARAM_DEFINE_FLOAT(EKF_ATT_V3_R1, 10000.0f); -PARAM_DEFINE_FLOAT(EKF_ATT_V3_R2, 1.0f); -/* accelerometer measurement noise */ -PARAM_DEFINE_FLOAT(EKF_ATT_V3_R3, 0.0f); +PARAM_DEFINE_FLOAT(EKF_ATT_V4_R0, 0.0008f); +/* accel measurement noise */ +PARAM_DEFINE_FLOAT(EKF_ATT_V4_R1, 10000.0f); +/* mag measurement noise */ +PARAM_DEFINE_FLOAT(EKF_ATT_V4_R2, 100.0f); +/* offset estimation - UNUSED */ +PARAM_DEFINE_FLOAT(EKF_ATT_V4_R3, 0.0f); /* offsets in roll, pitch and yaw of sensor plane and body */ PARAM_DEFINE_FLOAT(ATT_ROLL_OFF3, 0.0f); @@ -72,10 +74,10 @@ int parameters_init(struct attitude_estimator_ekf_param_handles *h) h->q3 = param_find("EKF_ATT_V3_Q3"); h->q4 = param_find("EKF_ATT_V3_Q4"); - h->r0 = param_find("EKF_ATT_V3_R0"); - h->r1 = param_find("EKF_ATT_V3_R1"); - h->r2 = param_find("EKF_ATT_V3_R2"); - h->r3 = param_find("EKF_ATT_V3_R3"); + h->r0 = param_find("EKF_ATT_V4_R0"); + h->r1 = param_find("EKF_ATT_V4_R1"); + h->r2 = param_find("EKF_ATT_V4_R2"); + h->r3 = param_find("EKF_ATT_V4_R3"); h->roll_off = param_find("ATT_ROLL_OFF3"); h->pitch_off = param_find("ATT_PITCH_OFF3"); diff --git a/src/modules/attitude_estimator_so3/README b/src/modules/attitude_estimator_so3/README new file mode 100644 index 000000000..02ab66ee4 --- /dev/null +++ b/src/modules/attitude_estimator_so3/README @@ -0,0 +1,3 @@ +Synopsis + + nsh> attitude_estimator_so3_comp start
\ No newline at end of file diff --git a/src/modules/attitude_estimator_so3_comp/attitude_estimator_so3_comp_main.cpp b/src/modules/attitude_estimator_so3/attitude_estimator_so3_main.cpp index 86bda3c75..e79726613 100755 --- a/src/modules/attitude_estimator_so3_comp/attitude_estimator_so3_comp_main.cpp +++ b/src/modules/attitude_estimator_so3/attitude_estimator_so3_main.cpp @@ -1,16 +1,49 @@ -/* - * Author: Hyon Lim <limhyon@gmail.com, hyonlim@snu.ac.kr> +/**************************************************************************** + * + * Copyright (C) 2013 PX4 Development Team. All rights reserved. + * Author: Hyon Lim <limhyon@gmail.com> + * Anton Babushkin <anton.babushkin@me.com> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: * - * @file attitude_estimator_so3_comp_main.c + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + + /* + * @file attitude_estimator_so3_main.cpp * * Implementation of nonlinear complementary filters on the SO(3). * This code performs attitude estimation by using accelerometer, gyroscopes and magnetometer. * Result is provided as quaternion, 1-2-3 Euler angle and rotation matrix. - * + * * Theory of nonlinear complementary filters on the SO(3) is based on [1]. * Quaternion realization of [1] is based on [2]. * Optmized quaternion update code is based on Sebastian Madgwick's implementation. - * + * * References * [1] Mahony, R.; Hamel, T.; Pflimlin, Jean-Michel, "Nonlinear Complementary Filters on the Special Orthogonal Group," Automatic Control, IEEE Transactions on , vol.53, no.5, pp.1203,1218, June 2008 * [2] Euston, M.; Coote, P.; Mahony, R.; Jonghyuk Kim; Hamel, T., "A complementary filter for attitude estimation of a fixed-wing UAV," Intelligent Robots and Systems, 2008. IROS 2008. IEEE/RSJ International Conference on , vol., no., pp.340,345, 22-26 Sept. 2008 @@ -46,94 +79,91 @@ #ifdef __cplusplus extern "C" { #endif -#include "attitude_estimator_so3_comp_params.h" +#include "attitude_estimator_so3_params.h" #ifdef __cplusplus } #endif -extern "C" __EXPORT int attitude_estimator_so3_comp_main(int argc, char *argv[]); +extern "C" __EXPORT int attitude_estimator_so3_main(int argc, char *argv[]); static bool thread_should_exit = false; /**< Deamon exit flag */ static bool thread_running = false; /**< Deamon status flag */ -static int attitude_estimator_so3_comp_task; /**< Handle of deamon task / thread */ +static int attitude_estimator_so3_task; /**< Handle of deamon task / thread */ + +//! Auxiliary variables to reduce number of repeated operations static float q0 = 1.0f, q1 = 0.0f, q2 = 0.0f, q3 = 0.0f; /** quaternion of sensor frame relative to auxiliary frame */ static float dq0 = 0.0f, dq1 = 0.0f, dq2 = 0.0f, dq3 = 0.0f; /** quaternion of sensor frame relative to auxiliary frame */ static float gyro_bias[3] = {0.0f, 0.0f, 0.0f}; /** bias estimation */ -static bool bFilterInit = false; - -//! Auxiliary variables to reduce number of repeated operations static float q0q0, q0q1, q0q2, q0q3; static float q1q1, q1q2, q1q3; static float q2q2, q2q3; static float q3q3; - -//! Serial packet related -static int uart; -static int baudrate; +static bool bFilterInit = false; /** - * Mainloop of attitude_estimator_so3_comp. + * Mainloop of attitude_estimator_so3. */ -int attitude_estimator_so3_comp_thread_main(int argc, char *argv[]); +int attitude_estimator_so3_thread_main(int argc, char *argv[]); /** * Print the correct usage. */ static void usage(const char *reason); +/* Function prototypes */ +float invSqrt(float number); +void NonlinearSO3AHRSinit(float ax, float ay, float az, float mx, float my, float mz); +void NonlinearSO3AHRSupdate(float gx, float gy, float gz, float ax, float ay, float az, float mx, float my, float mz, float twoKp, float twoKi, float dt); + static void usage(const char *reason) { if (reason) fprintf(stderr, "%s\n", reason); - fprintf(stderr, "usage: attitude_estimator_so3_comp {start|stop|status} [-d <devicename>] [-b <baud rate>]\n" - "-d and -b options are for separate visualization with raw data (quaternion packet) transfer\n" - "ex) attitude_estimator_so3_comp start -d /dev/ttyS1 -b 115200\n"); + fprintf(stderr, "usage: attitude_estimator_so3 {start|stop|status}\n"); exit(1); } /** - * The attitude_estimator_so3_comp app only briefly exists to start + * The attitude_estimator_so3 app only briefly exists to start * the background job. The stack size assigned in the * Makefile does only apply to this management task. * * The actual stack size should be set in the call * to task_create(). */ -int attitude_estimator_so3_comp_main(int argc, char *argv[]) +int attitude_estimator_so3_main(int argc, char *argv[]) { if (argc < 1) usage("missing command"); - - if (!strcmp(argv[1], "start")) { if (thread_running) { - printf("attitude_estimator_so3_comp already running\n"); + warnx("already running\n"); /* this is not an error */ exit(0); } thread_should_exit = false; - attitude_estimator_so3_comp_task = task_spawn_cmd("attitude_estimator_so3_comp", + attitude_estimator_so3_task = task_spawn_cmd("attitude_estimator_so3", SCHED_DEFAULT, SCHED_PRIORITY_MAX - 5, - 12400, - attitude_estimator_so3_comp_thread_main, - (const char **)argv); + 14000, + attitude_estimator_so3_thread_main, + (argv) ? (const char **)&argv[2] : (const char **)NULL); exit(0); } if (!strcmp(argv[1], "stop")) { thread_should_exit = true; - while(thread_running){ + while (thread_running){ usleep(200000); - printf("."); } - printf("terminated."); + + warnx("stopped"); exit(0); } @@ -157,7 +187,8 @@ int attitude_estimator_so3_comp_main(int argc, char *argv[]) //--------------------------------------------------------------------------------------------------- // Fast inverse square-root // See: http://en.wikipedia.org/wiki/Fast_inverse_square_root -float invSqrt(float number) { +float invSqrt(float number) +{ volatile long i; volatile float x, y; volatile const float f = 1.5F; @@ -221,48 +252,47 @@ void NonlinearSO3AHRSinit(float ax, float ay, float az, float mx, float my, floa q3q3 = q3 * q3; } -void NonlinearSO3AHRSupdate(float gx, float gy, float gz, float ax, float ay, float az, float mx, float my, float mz, float twoKp, float twoKi, float dt) { +void NonlinearSO3AHRSupdate(float gx, float gy, float gz, float ax, float ay, float az, float mx, float my, float mz, float twoKp, float twoKi, float dt) +{ float recipNorm; float halfex = 0.0f, halfey = 0.0f, halfez = 0.0f; - //! Make filter converge to initial solution faster - //! This function assumes you are in static position. - //! WARNING : in case air reboot, this can cause problem. But this is very - //! unlikely happen. - if(bFilterInit == false) - { + // Make filter converge to initial solution faster + // This function assumes you are in static position. + // WARNING : in case air reboot, this can cause problem. But this is very unlikely happen. + if(bFilterInit == false) { NonlinearSO3AHRSinit(ax,ay,az,mx,my,mz); bFilterInit = true; } //! If magnetometer measurement is available, use it. - if((mx == 0.0f) && (my == 0.0f) && (mz == 0.0f)) { + if(!((mx == 0.0f) && (my == 0.0f) && (mz == 0.0f))) { float hx, hy, hz, bx, bz; float halfwx, halfwy, halfwz; // Normalise magnetometer measurement // Will sqrt work better? PX4 system is powerful enough? - recipNorm = invSqrt(mx * mx + my * my + mz * mz); - mx *= recipNorm; - my *= recipNorm; - mz *= recipNorm; + recipNorm = invSqrt(mx * mx + my * my + mz * mz); + mx *= recipNorm; + my *= recipNorm; + mz *= recipNorm; - // Reference direction of Earth's magnetic field - hx = 2.0f * (mx * (0.5f - q2q2 - q3q3) + my * (q1q2 - q0q3) + mz * (q1q3 + q0q2)); - hy = 2.0f * (mx * (q1q2 + q0q3) + my * (0.5f - q1q1 - q3q3) + mz * (q2q3 - q0q1)); - hz = 2 * mx * (q1q3 - q0q2) + 2 * my * (q2q3 + q0q1) + 2 * mz * (0.5 - q1q1 - q2q2); - bx = sqrt(hx * hx + hy * hy); - bz = hz; + // Reference direction of Earth's magnetic field + hx = 2.0f * (mx * (0.5f - q2q2 - q3q3) + my * (q1q2 - q0q3) + mz * (q1q3 + q0q2)); + hy = 2.0f * (mx * (q1q2 + q0q3) + my * (0.5f - q1q1 - q3q3) + mz * (q2q3 - q0q1)); + hz = 2.0f * mx * (q1q3 - q0q2) + 2.0f * my * (q2q3 + q0q1) + 2.0f * mz * (0.5f - q1q1 - q2q2); + bx = sqrt(hx * hx + hy * hy); + bz = hz; - // Estimated direction of magnetic field - halfwx = bx * (0.5f - q2q2 - q3q3) + bz * (q1q3 - q0q2); - halfwy = bx * (q1q2 - q0q3) + bz * (q0q1 + q2q3); - halfwz = bx * (q0q2 + q1q3) + bz * (0.5f - q1q1 - q2q2); + // Estimated direction of magnetic field + halfwx = bx * (0.5f - q2q2 - q3q3) + bz * (q1q3 - q0q2); + halfwy = bx * (q1q2 - q0q3) + bz * (q0q1 + q2q3); + halfwz = bx * (q0q2 + q1q3) + bz * (0.5f - q1q1 - q2q2); - // Error is sum of cross product between estimated direction and measured direction of field vectors - halfex += (my * halfwz - mz * halfwy); - halfey += (mz * halfwx - mx * halfwz); - halfez += (mx * halfwy - my * halfwx); + // Error is sum of cross product between estimated direction and measured direction of field vectors + halfex += (my * halfwz - mz * halfwy); + halfey += (mz * halfwx - mx * halfwz); + halfez += (mx * halfwy - my * halfwx); } // Compute feedback only if accelerometer measurement valid (avoids NaN in accelerometer normalisation) @@ -293,7 +323,9 @@ void NonlinearSO3AHRSupdate(float gx, float gy, float gz, float ax, float ay, fl gyro_bias[0] += twoKi * halfex * dt; // integral error scaled by Ki gyro_bias[1] += twoKi * halfey * dt; gyro_bias[2] += twoKi * halfez * dt; - gx += gyro_bias[0]; // apply integral feedback + + // apply integral feedback + gx += gyro_bias[0]; gy += gyro_bias[1]; gz += gyro_bias[2]; } @@ -337,208 +369,43 @@ void NonlinearSO3AHRSupdate(float gx, float gy, float gz, float ax, float ay, fl q3 *= recipNorm; // Auxiliary variables to avoid repeated arithmetic - q0q0 = q0 * q0; - q0q1 = q0 * q1; - q0q2 = q0 * q2; - q0q3 = q0 * q3; - q1q1 = q1 * q1; - q1q2 = q1 * q2; + q0q0 = q0 * q0; + q0q1 = q0 * q1; + q0q2 = q0 * q2; + q0q3 = q0 * q3; + q1q1 = q1 * q1; + q1q2 = q1 * q2; q1q3 = q1 * q3; - q2q2 = q2 * q2; - q2q3 = q2 * q3; - q3q3 = q3 * q3; -} - -void send_uart_byte(char c) -{ - write(uart,&c,1); -} - -void send_uart_bytes(uint8_t *data, int length) -{ - write(uart,data,(size_t)(sizeof(uint8_t)*length)); -} - -void send_uart_float(float f) { - uint8_t * b = (uint8_t *) &f; - - //! Assume float is 4-bytes - for(int i=0; i<4; i++) { - - uint8_t b1 = (b[i] >> 4) & 0x0f; - uint8_t b2 = (b[i] & 0x0f); - - uint8_t c1 = (b1 < 10) ? ('0' + b1) : 'A' + b1 - 10; - uint8_t c2 = (b2 < 10) ? ('0' + b2) : 'A' + b2 - 10; - - send_uart_bytes(&c1,1); - send_uart_bytes(&c2,1); - } -} - -void send_uart_float_arr(float *arr, int length) -{ - for(int i=0;i<length;++i) - { - send_uart_float(arr[i]); - send_uart_byte(','); - } -} - -int open_uart(int baud, const char *uart_name, struct termios *uart_config_original, bool *is_usb) -{ - int speed; - - switch (baud) { - case 0: speed = B0; break; - case 50: speed = B50; break; - case 75: speed = B75; break; - case 110: speed = B110; break; - case 134: speed = B134; break; - case 150: speed = B150; break; - case 200: speed = B200; break; - case 300: speed = B300; break; - case 600: speed = B600; break; - case 1200: speed = B1200; break; - case 1800: speed = B1800; break; - case 2400: speed = B2400; break; - case 4800: speed = B4800; break; - case 9600: speed = B9600; break; - case 19200: speed = B19200; break; - case 38400: speed = B38400; break; - case 57600: speed = B57600; break; - case 115200: speed = B115200; break; - case 230400: speed = B230400; break; - case 460800: speed = B460800; break; - case 921600: speed = B921600; break; - default: - printf("ERROR: Unsupported baudrate: %d\n\tsupported examples:\n\n\t9600\n19200\n38400\n57600\n115200\n230400\n460800\n921600\n\n", baud); - return -EINVAL; - } - - printf("[so3_comp_filt] UART is %s, baudrate is %d\n", uart_name, baud); - uart = open(uart_name, O_RDWR | O_NOCTTY); - - /* Try to set baud rate */ - struct termios uart_config; - int termios_state; - *is_usb = false; - - /* make some wild guesses including that USB serial is indicated by either /dev/ttyACM0 or /dev/console */ - if (strcmp(uart_name, "/dev/ttyACM0") != OK && strcmp(uart_name, "/dev/console") != OK) { - /* Back up the original uart configuration to restore it after exit */ - if ((termios_state = tcgetattr(uart, uart_config_original)) < 0) { - printf("ERROR getting baudrate / termios config for %s: %d\n", uart_name, termios_state); - close(uart); - return -1; - } - - /* Fill the struct for the new configuration */ - tcgetattr(uart, &uart_config); - - /* Clear ONLCR flag (which appends a CR for every LF) */ - uart_config.c_oflag &= ~ONLCR; - - /* Set baud rate */ - if (cfsetispeed(&uart_config, speed) < 0 || cfsetospeed(&uart_config, speed) < 0) { - printf("ERROR setting baudrate / termios config for %s: %d (cfsetispeed, cfsetospeed)\n", uart_name, termios_state); - close(uart); - return -1; - } - - - if ((termios_state = tcsetattr(uart, TCSANOW, &uart_config)) < 0) { - printf("ERROR setting baudrate / termios config for %s (tcsetattr)\n", uart_name); - close(uart); - return -1; - } - - } else { - *is_usb = true; - } - - return uart; + q2q2 = q2 * q2; + q2q3 = q2 * q3; + q3q3 = q3 * q3; } /* - * [Rot_matrix,x_aposteriori,P_aposteriori] = attitudeKalmanfilter(dt,z_k,x_aposteriori_k,P_aposteriori_k,knownConst) - */ - -/* - * EKF Attitude Estimator main function. + * Nonliner complementary filter on SO(3), attitude estimator main function. * - * Estimates the attitude recursively once started. + * Estimates the attitude once started. * * @param argc number of commandline arguments (plus command name) * @param argv strings containing the arguments */ -int attitude_estimator_so3_comp_thread_main(int argc, char *argv[]) +int attitude_estimator_so3_thread_main(int argc, char *argv[]) { - -const unsigned int loop_interval_alarm = 6500; // loop interval in microseconds - - //! Serial debug related - int ch; - struct termios uart_config_original; - bool usb_uart; - bool debug_mode = false; - char *device_name = "/dev/ttyS2"; - baudrate = 115200; + const unsigned int loop_interval_alarm = 6500; // loop interval in microseconds //! Time constant float dt = 0.005f; /* output euler angles */ float euler[3] = {0.0f, 0.0f, 0.0f}; - - float Rot_matrix[9] = {1.f, 0, 0, - 0, 1.f, 0, - 0, 0, 1.f - }; /**< init: identity matrix */ - + + /* Initialization */ + float Rot_matrix[9] = {1.f, 0.0f, 0.0f, 0.0f, 1.f, 0.0f, 0.0f, 0.0f, 1.f }; /**< init: identity matrix */ float acc[3] = {0.0f, 0.0f, 0.0f}; float gyro[3] = {0.0f, 0.0f, 0.0f}; float mag[3] = {0.0f, 0.0f, 0.0f}; - /* work around some stupidity in task_create's argv handling */ - argc -= 2; - argv += 2; - - //! -d <device_name>, default : /dev/ttyS2 - //! -b <baud_rate>, default : 115200 - while ((ch = getopt(argc,argv,"d:b:")) != EOF){ - switch(ch){ - case 'b': - baudrate = strtoul(optarg, NULL, 10); - if(baudrate == 0) - printf("invalid baud rate '%s'",optarg); - break; - case 'd': - device_name = optarg; - debug_mode = true; - break; - default: - usage("invalid argument"); - } - } - - if(debug_mode){ - printf("Opening debugging port for 3D visualization\n"); - uart = open_uart(baudrate, device_name, &uart_config_original, &usb_uart); - if (uart < 0) - printf("could not open %s", device_name); - else - printf("Open port success\n"); - } - - // print text - printf("Nonlinear SO3 Attitude Estimator initialized..\n\n"); - fflush(stdout); - - int overloadcounter = 19; - - /* store start time to guard against too slow update rates */ - uint64_t last_run = hrt_absolute_time(); + warnx("main thread started"); struct sensor_combined_s raw; memset(&raw, 0, sizeof(raw)); @@ -555,8 +422,8 @@ const unsigned int loop_interval_alarm = 6500; // loop interval in microseconds /* subscribe to raw data */ int sub_raw = orb_subscribe(ORB_ID(sensor_combined)); - /* rate-limit raw data updates to 200Hz */ - orb_set_interval(sub_raw, 4); + /* rate-limit raw data updates to 333 Hz (sensors app publishes at 200, so this is just paranoid) */ + orb_set_interval(sub_raw, 3); /* subscribe to param changes */ int sub_params = orb_subscribe(ORB_ID(parameter_update)); @@ -565,17 +432,15 @@ const unsigned int loop_interval_alarm = 6500; // loop interval in microseconds int sub_control_mode = orb_subscribe(ORB_ID(vehicle_control_mode)); /* advertise attitude */ - orb_advert_t pub_att = orb_advertise(ORB_ID(vehicle_attitude), &att); + //orb_advert_t pub_att = orb_advertise(ORB_ID(vehicle_attitude), &att); + //orb_advert_t att_pub = -1; + orb_advert_t att_pub = orb_advertise(ORB_ID(vehicle_attitude), &att); int loopcounter = 0; int printcounter = 0; thread_running = true; - /* advertise debug value */ - // struct debug_key_value_s dbg = { .key = "", .value = 0.0f }; - // orb_advert_t pub_dbg = -1; - float sensor_update_hz[3] = {0.0f, 0.0f, 0.0f}; // XXX write this out to perf regs @@ -583,20 +448,22 @@ const unsigned int loop_interval_alarm = 6500; // loop interval in microseconds uint32_t sensor_last_count[3] = {0, 0, 0}; uint64_t sensor_last_timestamp[3] = {0, 0, 0}; - struct attitude_estimator_so3_comp_params so3_comp_params; - struct attitude_estimator_so3_comp_param_handles so3_comp_param_handles; + struct attitude_estimator_so3_params so3_comp_params; + struct attitude_estimator_so3_param_handles so3_comp_param_handles; /* initialize parameter handles */ parameters_init(&so3_comp_param_handles); + parameters_update(&so3_comp_param_handles, &so3_comp_params); uint64_t start_time = hrt_absolute_time(); bool initialized = false; + bool state_initialized = false; float gyro_offsets[3] = { 0.0f, 0.0f, 0.0f }; unsigned offset_count = 0; /* register the perf counter */ - perf_counter_t so3_comp_loop_perf = perf_alloc(PC_ELAPSED, "attitude_estimator_so3_comp"); + perf_counter_t so3_comp_loop_perf = perf_alloc(PC_ELAPSED, "attitude_estimator_so3"); /* Main loop*/ while (!thread_should_exit) { @@ -615,12 +482,9 @@ const unsigned int loop_interval_alarm = 6500; // loop interval in microseconds orb_copy(ORB_ID(vehicle_control_mode), sub_control_mode, &control_mode); if (!control_mode.flag_system_hil_enabled) { - fprintf(stderr, - "[att so3_comp] WARNING: Not getting sensors - sensor app running?\n"); + warnx("WARNING: Not getting sensors - sensor app running?"); } - } else { - /* only update parameters if they changed */ if (fds[1].revents & POLLIN) { /* read from param to clear updated flag */ @@ -644,11 +508,12 @@ const unsigned int loop_interval_alarm = 6500; // loop interval in microseconds gyro_offsets[2] += raw.gyro_rad_s[2]; offset_count++; - if (hrt_absolute_time() - start_time > 3000000LL) { + if (hrt_absolute_time() > start_time + 3000000l) { initialized = true; gyro_offsets[0] /= offset_count; gyro_offsets[1] /= offset_count; gyro_offsets[2] /= offset_count; + warnx("gyro initialized, offsets: %.5f %.5f %.5f", gyro_offsets[0], gyro_offsets[1], gyro_offsets[2]); } } else { @@ -668,9 +533,9 @@ const unsigned int loop_interval_alarm = 6500; // loop interval in microseconds sensor_last_timestamp[0] = raw.timestamp; } - gyro[0] = raw.gyro_rad_s[0] - gyro_offsets[0]; - gyro[1] = raw.gyro_rad_s[1] - gyro_offsets[1]; - gyro[2] = raw.gyro_rad_s[2] - gyro_offsets[2]; + gyro[0] = raw.gyro_rad_s[0] - gyro_offsets[0]; + gyro[1] = raw.gyro_rad_s[1] - gyro_offsets[1]; + gyro[2] = raw.gyro_rad_s[2] - gyro_offsets[2]; /* update accelerometer measurements */ if (sensor_last_count[1] != raw.accelerometer_counter) { @@ -696,31 +561,14 @@ const unsigned int loop_interval_alarm = 6500; // loop interval in microseconds mag[1] = raw.magnetometer_ga[1]; mag[2] = raw.magnetometer_ga[2]; - uint64_t now = hrt_absolute_time(); - unsigned int time_elapsed = now - last_run; - last_run = now; - - if (time_elapsed > loop_interval_alarm) { - //TODO: add warning, cpu overload here - // if (overloadcounter == 20) { - // printf("CPU OVERLOAD DETECTED IN ATTITUDE ESTIMATOR EKF (%lu > %lu)\n", time_elapsed, loop_interval_alarm); - // overloadcounter = 0; - // } - - overloadcounter++; - } - - static bool const_initialized = false; - /* initialize with good values once we have a reasonable dt estimate */ - if (!const_initialized && dt < 0.05f && dt > 0.005f) { - dt = 0.005f; - parameters_update(&so3_comp_param_handles, &so3_comp_params); - const_initialized = true; + if (!state_initialized && dt < 0.05f && dt > 0.001f) { + state_initialized = true; + warnx("state initialized"); } /* do not execute the filter if not initialized */ - if (!const_initialized) { + if (!state_initialized) { continue; } @@ -728,18 +576,23 @@ const unsigned int loop_interval_alarm = 6500; // loop interval in microseconds // NOTE : Accelerometer is reversed. // Because proper mount of PX4 will give you a reversed accelerometer readings. - NonlinearSO3AHRSupdate(gyro[0],gyro[1],gyro[2],-acc[0],-acc[1],-acc[2],mag[0],mag[1],mag[2],so3_comp_params.Kp,so3_comp_params.Ki, dt); + NonlinearSO3AHRSupdate(gyro[0], gyro[1], gyro[2], + -acc[0], -acc[1], -acc[2], + mag[0], mag[1], mag[2], + so3_comp_params.Kp, + so3_comp_params.Ki, + dt); // Convert q->R, This R converts inertial frame to body frame. Rot_matrix[0] = q0q0 + q1q1 - q2q2 - q3q3;// 11 - Rot_matrix[1] = 2.0 * (q1*q2 + q0*q3); // 12 - Rot_matrix[2] = 2.0 * (q1*q3 - q0*q2); // 13 - Rot_matrix[3] = 2.0 * (q1*q2 - q0*q3); // 21 - Rot_matrix[4] = q0q0 - q1q1 + q2q2 - q3q3;// 22 - Rot_matrix[5] = 2.0 * (q2*q3 + q0*q1); // 23 - Rot_matrix[6] = 2.0 * (q1*q3 + q0*q2); // 31 - Rot_matrix[7] = 2.0 * (q2*q3 - q0*q1); // 32 - Rot_matrix[8] = q0q0 - q1q1 - q2q2 + q3q3;// 33 + Rot_matrix[1] = 2.f * (q1*q2 + q0*q3); // 12 + Rot_matrix[2] = 2.f * (q1*q3 - q0*q2); // 13 + Rot_matrix[3] = 2.f * (q1*q2 - q0*q3); // 21 + Rot_matrix[4] = q0q0 - q1q1 + q2q2 - q3q3;// 22 + Rot_matrix[5] = 2.f * (q2*q3 + q0*q1); // 23 + Rot_matrix[6] = 2.f * (q1*q3 + q0*q2); // 31 + Rot_matrix[7] = 2.f * (q2*q3 - q0*q1); // 32 + Rot_matrix[8] = q0q0 - q1q1 - q2q2 + q3q3;// 33 //1-2-3 Representation. //Equation (290) @@ -747,29 +600,42 @@ const unsigned int loop_interval_alarm = 6500; // loop interval in microseconds // Existing PX4 EKF code was generated by MATLAB which uses coloum major order matrix. euler[0] = atan2f(Rot_matrix[5], Rot_matrix[8]); //! Roll euler[1] = -asinf(Rot_matrix[2]); //! Pitch - euler[2] = atan2f(Rot_matrix[1],Rot_matrix[0]); //! Yaw + euler[2] = atan2f(Rot_matrix[1], Rot_matrix[0]); //! Yaw /* swap values for next iteration, check for fatal inputs */ if (isfinite(euler[0]) && isfinite(euler[1]) && isfinite(euler[2])) { - /* Do something */ + // Publish only finite euler angles + att.roll = euler[0] - so3_comp_params.roll_off; + att.pitch = euler[1] - so3_comp_params.pitch_off; + att.yaw = euler[2] - so3_comp_params.yaw_off; } else { /* due to inputs or numerical failure the output is invalid, skip it */ + // Due to inputs or numerical failure the output is invalid + warnx("infinite euler angles, rotation matrix:"); + warnx("%.3f %.3f %.3f", Rot_matrix[0], Rot_matrix[1], Rot_matrix[2]); + warnx("%.3f %.3f %.3f", Rot_matrix[3], Rot_matrix[4], Rot_matrix[5]); + warnx("%.3f %.3f %.3f", Rot_matrix[6], Rot_matrix[7], Rot_matrix[8]); + // Don't publish anything continue; } - if (last_data > 0 && raw.timestamp - last_data > 12000) printf("[attitude estimator so3_comp] sensor data missed! (%llu)\n", raw.timestamp - last_data); + if (last_data > 0 && raw.timestamp > last_data + 12000) { + warnx("sensor data missed"); + } last_data = raw.timestamp; /* send out */ att.timestamp = raw.timestamp; + + // Quaternion + att.q[0] = q0; + att.q[1] = q1; + att.q[2] = q2; + att.q[3] = q3; + att.q_valid = true; - // XXX Apply the same transformation to the rotation matrix - att.roll = euler[0] - so3_comp_params.roll_off; - att.pitch = euler[1] - so3_comp_params.pitch_off; - att.yaw = euler[2] - so3_comp_params.yaw_off; - - //! Euler angle rate. But it needs to be investigated again. + // Euler angle rate. But it needs to be investigated again. /* att.rollspeed = 2.0f*(-q1*dq0 + q0*dq1 - q3*dq2 + q2*dq3); att.pitchspeed = 2.0f*(-q2*dq0 + q3*dq1 + q0*dq2 - q1*dq3); @@ -783,53 +649,30 @@ const unsigned int loop_interval_alarm = 6500; // loop interval in microseconds att.pitchacc = 0; att.yawacc = 0; - //! Quaternion - att.q[0] = q0; - att.q[1] = q1; - att.q[2] = q2; - att.q[3] = q3; - att.q_valid = true; - /* TODO: Bias estimation required */ memcpy(&att.rate_offsets, &(gyro_bias), sizeof(att.rate_offsets)); /* copy rotation matrix */ memcpy(&att.R, Rot_matrix, sizeof(float)*9); att.R_valid = true; - - if (isfinite(att.roll) && isfinite(att.pitch) && isfinite(att.yaw)) { - // Broadcast - orb_publish(ORB_ID(vehicle_attitude), pub_att, &att); - + + // Publish + if (att_pub > 0) { + orb_publish(ORB_ID(vehicle_attitude), att_pub, &att); } else { warnx("NaN in roll/pitch/yaw estimate!"); + orb_advertise(ORB_ID(vehicle_attitude), &att); } perf_end(so3_comp_loop_perf); - - //! This will print out debug packet to visualization software - if(debug_mode) - { - float quat[4]; - quat[0] = q0; - quat[1] = q1; - quat[2] = q2; - quat[3] = q3; - send_uart_float_arr(quat,4); - send_uart_byte('\n'); - } } } } loopcounter++; - }// while + } thread_running = false; - /* Reset the UART flags to original state */ - if (!usb_uart) - tcsetattr(uart, TCSANOW, &uart_config_original); - return 0; } diff --git a/src/modules/attitude_estimator_so3/attitude_estimator_so3_params.c b/src/modules/attitude_estimator_so3/attitude_estimator_so3_params.c new file mode 100755 index 000000000..0c8d522b4 --- /dev/null +++ b/src/modules/attitude_estimator_so3/attitude_estimator_so3_params.c @@ -0,0 +1,86 @@ +/**************************************************************************** + * + * Copyright (C) 2013 PX4 Development Team. All rights reserved. + * Author: Hyon Lim <limhyon@gmail.com> + * Anton Babushkin <anton.babushkin@me.com> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/* + * @file attitude_estimator_so3_params.c + * + * Parameters for nonlinear complementary filters on the SO(3). + */ + +#include "attitude_estimator_so3_params.h" + +/* This is filter gain for nonlinear SO3 complementary filter */ +/* NOTE : How to tune the gain? First of all, stick with this default gain. And let the quad in stable place. + Log the steady state reponse of filter. If it is too slow, increase SO3_COMP_KP. + If you are flying from ground to high altitude in short amount of time, please increase SO3_COMP_KI which + will compensate gyro bias which depends on temperature and vibration of your vehicle */ +PARAM_DEFINE_FLOAT(SO3_COMP_KP, 1.0f); //! This parameter will give you about 15 seconds convergence time. + //! You can set this gain higher if you want more fast response. + //! But note that higher gain will give you also higher overshoot. +PARAM_DEFINE_FLOAT(SO3_COMP_KI, 0.05f); //! This gain will incorporate slow time-varying bias (e.g., temperature change) + //! This gain is depend on your vehicle status. + +/* offsets in roll, pitch and yaw of sensor plane and body */ +PARAM_DEFINE_FLOAT(SO3_ROLL_OFFS, 0.0f); +PARAM_DEFINE_FLOAT(SO3_PITCH_OFFS, 0.0f); +PARAM_DEFINE_FLOAT(SO3_YAW_OFFS, 0.0f); + +int parameters_init(struct attitude_estimator_so3_param_handles *h) +{ + /* Filter gain parameters */ + h->Kp = param_find("SO3_COMP_KP"); + h->Ki = param_find("SO3_COMP_KI"); + + /* Attitude offset (WARNING: Do not change if you do not know what exactly this variable wil lchange) */ + h->roll_off = param_find("SO3_ROLL_OFFS"); + h->pitch_off = param_find("SO3_PITCH_OFFS"); + h->yaw_off = param_find("SO3_YAW_OFFS"); + + return OK; +} + +int parameters_update(const struct attitude_estimator_so3_param_handles *h, struct attitude_estimator_so3_params *p) +{ + /* Update filter gain */ + param_get(h->Kp, &(p->Kp)); + param_get(h->Ki, &(p->Ki)); + + /* Update attitude offset */ + param_get(h->roll_off, &(p->roll_off)); + param_get(h->pitch_off, &(p->pitch_off)); + param_get(h->yaw_off, &(p->yaw_off)); + + return OK; +} diff --git a/src/modules/attitude_estimator_so3/attitude_estimator_so3_params.h b/src/modules/attitude_estimator_so3/attitude_estimator_so3_params.h new file mode 100755 index 000000000..dfb4cad05 --- /dev/null +++ b/src/modules/attitude_estimator_so3/attitude_estimator_so3_params.h @@ -0,0 +1,67 @@ +/**************************************************************************** + * + * Copyright (C) 2013 PX4 Development Team. All rights reserved. + * Author: Hyon Lim <limhyon@gmail.com> + * Anton Babushkin <anton.babushkin@me.com> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/* + * @file attitude_estimator_so3_params.h + * + * Parameters for nonlinear complementary filters on the SO(3). + */ + +#include <systemlib/param/param.h> + +struct attitude_estimator_so3_params { + float Kp; + float Ki; + float roll_off; + float pitch_off; + float yaw_off; +}; + +struct attitude_estimator_so3_param_handles { + param_t Kp, Ki; + param_t roll_off, pitch_off, yaw_off; +}; + +/** + * Initialize all parameter handles and values + * + */ +int parameters_init(struct attitude_estimator_so3_param_handles *h); + +/** + * Update all parameters + * + */ +int parameters_update(const struct attitude_estimator_so3_param_handles *h, struct attitude_estimator_so3_params *p); diff --git a/src/modules/attitude_estimator_so3/module.mk b/src/modules/attitude_estimator_so3/module.mk new file mode 100644 index 000000000..e29bb16a6 --- /dev/null +++ b/src/modules/attitude_estimator_so3/module.mk @@ -0,0 +1,8 @@ +# +# Attitude estimator (Nonlinear SO(3) complementary Filter) +# + +MODULE_COMMAND = attitude_estimator_so3 + +SRCS = attitude_estimator_so3_main.cpp \ + attitude_estimator_so3_params.c diff --git a/src/modules/attitude_estimator_so3_comp/README b/src/modules/attitude_estimator_so3_comp/README deleted file mode 100644 index 79c50a531..000000000 --- a/src/modules/attitude_estimator_so3_comp/README +++ /dev/null @@ -1,5 +0,0 @@ -Synopsis - - nsh> attitude_estimator_so3_comp start -d /dev/ttyS1 -b 115200 - -Option -d is for debugging packet. See code for detailed packet structure. diff --git a/src/modules/attitude_estimator_so3_comp/attitude_estimator_so3_comp_params.c b/src/modules/attitude_estimator_so3_comp/attitude_estimator_so3_comp_params.c deleted file mode 100755 index f962515df..000000000 --- a/src/modules/attitude_estimator_so3_comp/attitude_estimator_so3_comp_params.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Author: Hyon Lim <limhyon@gmail.com, hyonlim@snu.ac.kr> - * - * @file attitude_estimator_so3_comp_params.c - * - * Implementation of nonlinear complementary filters on the SO(3). - * This code performs attitude estimation by using accelerometer, gyroscopes and magnetometer. - * Result is provided as quaternion, 1-2-3 Euler angle and rotation matrix. - * - * Theory of nonlinear complementary filters on the SO(3) is based on [1]. - * Quaternion realization of [1] is based on [2]. - * Optmized quaternion update code is based on Sebastian Madgwick's implementation. - * - * References - * [1] Mahony, R.; Hamel, T.; Pflimlin, Jean-Michel, "Nonlinear Complementary Filters on the Special Orthogonal Group," Automatic Control, IEEE Transactions on , vol.53, no.5, pp.1203,1218, June 2008 - * [2] Euston, M.; Coote, P.; Mahony, R.; Jonghyuk Kim; Hamel, T., "A complementary filter for attitude estimation of a fixed-wing UAV," Intelligent Robots and Systems, 2008. IROS 2008. IEEE/RSJ International Conference on , vol., no., pp.340,345, 22-26 Sept. 2008 - */ - -#include "attitude_estimator_so3_comp_params.h" - -/* This is filter gain for nonlinear SO3 complementary filter */ -/* NOTE : How to tune the gain? First of all, stick with this default gain. And let the quad in stable place. - Log the steady state reponse of filter. If it is too slow, increase SO3_COMP_KP. - If you are flying from ground to high altitude in short amount of time, please increase SO3_COMP_KI which - will compensate gyro bias which depends on temperature and vibration of your vehicle */ -PARAM_DEFINE_FLOAT(SO3_COMP_KP, 1.0f); //! This parameter will give you about 15 seconds convergence time. - //! You can set this gain higher if you want more fast response. - //! But note that higher gain will give you also higher overshoot. -PARAM_DEFINE_FLOAT(SO3_COMP_KI, 0.05f); //! This gain will incorporate slow time-varying bias (e.g., temperature change) - //! This gain is depend on your vehicle status. - -/* offsets in roll, pitch and yaw of sensor plane and body */ -PARAM_DEFINE_FLOAT(ATT_ROLL_OFFS, 0.0f); -PARAM_DEFINE_FLOAT(ATT_PITCH_OFFS, 0.0f); -PARAM_DEFINE_FLOAT(ATT_YAW_OFFS, 0.0f); - -int parameters_init(struct attitude_estimator_so3_comp_param_handles *h) -{ - /* Filter gain parameters */ - h->Kp = param_find("SO3_COMP_KP"); - h->Ki = param_find("SO3_COMP_KI"); - - /* Attitude offset (WARNING: Do not change if you do not know what exactly this variable wil lchange) */ - h->roll_off = param_find("ATT_ROLL_OFFS"); - h->pitch_off = param_find("ATT_PITCH_OFFS"); - h->yaw_off = param_find("ATT_YAW_OFFS"); - - return OK; -} - -int parameters_update(const struct attitude_estimator_so3_comp_param_handles *h, struct attitude_estimator_so3_comp_params *p) -{ - /* Update filter gain */ - param_get(h->Kp, &(p->Kp)); - param_get(h->Ki, &(p->Ki)); - - /* Update attitude offset */ - param_get(h->roll_off, &(p->roll_off)); - param_get(h->pitch_off, &(p->pitch_off)); - param_get(h->yaw_off, &(p->yaw_off)); - - return OK; -} diff --git a/src/modules/attitude_estimator_so3_comp/attitude_estimator_so3_comp_params.h b/src/modules/attitude_estimator_so3_comp/attitude_estimator_so3_comp_params.h deleted file mode 100755 index f00695630..000000000 --- a/src/modules/attitude_estimator_so3_comp/attitude_estimator_so3_comp_params.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Author: Hyon Lim <limhyon@gmail.com, hyonlim@snu.ac.kr> - * - * @file attitude_estimator_so3_comp_params.h - * - * Implementation of nonlinear complementary filters on the SO(3). - * This code performs attitude estimation by using accelerometer, gyroscopes and magnetometer. - * Result is provided as quaternion, 1-2-3 Euler angle and rotation matrix. - * - * Theory of nonlinear complementary filters on the SO(3) is based on [1]. - * Quaternion realization of [1] is based on [2]. - * Optmized quaternion update code is based on Sebastian Madgwick's implementation. - * - * References - * [1] Mahony, R.; Hamel, T.; Pflimlin, Jean-Michel, "Nonlinear Complementary Filters on the Special Orthogonal Group," Automatic Control, IEEE Transactions on , vol.53, no.5, pp.1203,1218, June 2008 - * [2] Euston, M.; Coote, P.; Mahony, R.; Jonghyuk Kim; Hamel, T., "A complementary filter for attitude estimation of a fixed-wing UAV," Intelligent Robots and Systems, 2008. IROS 2008. IEEE/RSJ International Conference on , vol., no., pp.340,345, 22-26 Sept. 2008 - */ - -#include <systemlib/param/param.h> - -struct attitude_estimator_so3_comp_params { - float Kp; - float Ki; - float roll_off; - float pitch_off; - float yaw_off; -}; - -struct attitude_estimator_so3_comp_param_handles { - param_t Kp, Ki; - param_t roll_off, pitch_off, yaw_off; -}; - -/** - * Initialize all parameter handles and values - * - */ -int parameters_init(struct attitude_estimator_so3_comp_param_handles *h); - -/** - * Update all parameters - * - */ -int parameters_update(const struct attitude_estimator_so3_comp_param_handles *h, struct attitude_estimator_so3_comp_params *p); diff --git a/src/modules/attitude_estimator_so3_comp/module.mk b/src/modules/attitude_estimator_so3_comp/module.mk deleted file mode 100644 index 92f43d920..000000000 --- a/src/modules/attitude_estimator_so3_comp/module.mk +++ /dev/null @@ -1,8 +0,0 @@ -# -# Attitude estimator (Nonlinear SO3 complementary Filter) -# - -MODULE_COMMAND = attitude_estimator_so3_comp - -SRCS = attitude_estimator_so3_comp_main.cpp \ - attitude_estimator_so3_comp_params.c diff --git a/src/modules/commander/commander.cpp b/src/modules/commander/commander.cpp index e6eaa742b..add7312de 100644 --- a/src/modules/commander/commander.cpp +++ b/src/modules/commander/commander.cpp @@ -863,7 +863,7 @@ int commander_thread_main(int argc, char *argv[]) check_valid(local_position.timestamp, POSITION_TIMEOUT, local_position.xy_valid, &(status.condition_local_position_valid), &status_changed); check_valid(local_position.timestamp, POSITION_TIMEOUT, local_position.z_valid, &(status.condition_local_altitude_valid), &status_changed); - if (status.condition_local_altitude_valid) { + if (status.is_rotary_wing && status.condition_local_altitude_valid) { if (status.condition_landed != local_position.landed) { status.condition_landed = local_position.landed; status_changed = true; @@ -1512,7 +1512,8 @@ check_navigation_state_machine(struct vehicle_status_s *status, struct vehicle_c // TODO AUTO_LAND handling if (status->navigation_state == NAVIGATION_STATE_AUTO_TAKEOFF) { /* don't switch to other states until takeoff not completed */ - if (local_pos->z > -takeoff_alt || status->condition_landed) { + // XXX: only respect the condition_landed when the local position is actually valid + if (status->is_rotary_wing && status->condition_local_altitude_valid && (local_pos->z > -takeoff_alt || status->condition_landed)) { return TRANSITION_NOT_CHANGED; } } @@ -1522,7 +1523,7 @@ check_navigation_state_machine(struct vehicle_status_s *status, struct vehicle_c status->navigation_state != NAVIGATION_STATE_AUTO_MISSION && status->navigation_state != NAVIGATION_STATE_AUTO_RTL) { /* possibly on ground, switch to TAKEOFF if needed */ - if (local_pos->z > -takeoff_alt || status->condition_landed) { + if (status->is_rotary_wing && status->condition_local_altitude_valid && (local_pos->z > -takeoff_alt || status->condition_landed)) { res = navigation_state_transition(status, NAVIGATION_STATE_AUTO_TAKEOFF, control_mode); return res; } @@ -1570,8 +1571,8 @@ check_navigation_state_machine(struct vehicle_status_s *status, struct vehicle_c /* switch to failsafe mode */ bool manual_control_old = control_mode->flag_control_manual_enabled; - if (!status->condition_landed) { - /* in air: try to hold position */ + if (!status->condition_landed && status->condition_local_position_valid) { + /* in air: try to hold position if possible */ res = navigation_state_transition(status, NAVIGATION_STATE_VECTOR, control_mode); } else { diff --git a/src/modules/fixedwing_backside/fixedwing.cpp b/src/modules/fixedwing_backside/fixedwing.cpp index d65045d68..6dc19df41 100644 --- a/src/modules/fixedwing_backside/fixedwing.cpp +++ b/src/modules/fixedwing_backside/fixedwing.cpp @@ -156,7 +156,8 @@ void BlockMultiModeBacksideAutopilot::update() _actuators.control[i] = 0.0f; // only update guidance in auto mode - if (_status.navigation_state == NAVIGATION_STATE_AUTO_MISSION) { // TODO use vehicle_control_mode here? + if (_status.main_state == MAIN_STATE_AUTO) { + // TODO use vehicle_control_mode here? // update guidance _guide.update(_pos, _att, _posCmd.current, _lastPosCmd.current); } @@ -166,14 +167,11 @@ void BlockMultiModeBacksideAutopilot::update() // the setpoint should update to loitering around this position // handle autopilot modes - if (_status.navigation_state == NAVIGATION_STATE_AUTO_MISSION || - _status.navigation_state == NAVIGATION_STATE_STABILIZE) { // TODO use vehicle_control_mode here? + if (_status.main_state == MAIN_STATE_AUTO) { - // update guidance - _guide.update(_pos, _att, _posCmd.current, _lastPosCmd.current); - - // calculate velocity, XXX should be airspeed, but using ground speed for now - // for the purpose of control we will limit the velocity feedback between + // calculate velocity, XXX should be airspeed, + // but using ground speed for now for the purpose + // of control we will limit the velocity feedback between // the min/max velocity float v = _vLimit.update(sqrtf( _pos.vx * _pos.vx + @@ -218,19 +216,22 @@ void BlockMultiModeBacksideAutopilot::update() // a first binary release can be targeted. // This is not a hack, but a design choice. - /* do not limit in HIL */ + // do not limit in HIL if (_status.hil_state != HIL_STATE_ON) { /* limit to value of manual throttle */ _actuators.control[CH_THR] = (_actuators.control[CH_THR] < _manual.throttle) ? _actuators.control[CH_THR] : _manual.throttle; } - } else if (_status.navigation_state == NAVIGATION_STATE_DIRECT) { // TODO use vehicle_control_mode here? + } else if (_status.main_state == MAIN_STATE_MANUAL) { _actuators.control[CH_AIL] = _manual.roll; _actuators.control[CH_ELV] = _manual.pitch; _actuators.control[CH_RDR] = _manual.yaw; _actuators.control[CH_THR] = _manual.throttle; - } else if (_status.navigation_state == NAVIGATION_STATE_STABILIZE) { // TODO use vehicle_control_mode here? + + } else if (_status.main_state == MAIN_STATE_SEATBELT || + _status.main_state == MAIN_STATE_EASY /* TODO, implement easy */) { + // calculate velocity, XXX should be airspeed, but using ground speed for now // for the purpose of control we will limit the velocity feedback between // the min/max velocity diff --git a/src/modules/fixedwing_backside/fixedwing.hpp b/src/modules/fixedwing_backside/fixedwing.hpp index 3876e4630..567efeb35 100644 --- a/src/modules/fixedwing_backside/fixedwing.hpp +++ b/src/modules/fixedwing_backside/fixedwing.hpp @@ -255,13 +255,13 @@ private: BlockWaypointGuidance _guide; // block params - BlockParam<float> _trimAil; - BlockParam<float> _trimElv; - BlockParam<float> _trimRdr; - BlockParam<float> _trimThr; - BlockParam<float> _trimV; - BlockParam<float> _vCmd; - BlockParam<float> _crMax; + BlockParamFloat _trimAil; + BlockParamFloat _trimElv; + BlockParamFloat _trimRdr; + BlockParamFloat _trimThr; + BlockParamFloat _trimV; + BlockParamFloat _vCmd; + BlockParamFloat _crMax; struct pollfd _attPoll; vehicle_global_position_set_triplet_s _lastPosCmd; diff --git a/src/modules/fw_att_control/fw_att_control_main.cpp b/src/modules/fw_att_control/fw_att_control_main.cpp index 00a0dcd61..60c902ce5 100644 --- a/src/modules/fw_att_control/fw_att_control_main.cpp +++ b/src/modules/fw_att_control/fw_att_control_main.cpp @@ -479,7 +479,8 @@ FixedwingAttitudeControl::task_main() /* rate limit vehicle status updates to 5Hz */ orb_set_interval(_vcontrol_mode_sub, 200); - orb_set_interval(_att_sub, 100); + /* rate limit attitude control to 50 Hz (with some margin, so 17 ms) */ + orb_set_interval(_att_sub, 17); parameters_update(); diff --git a/src/modules/fw_att_control/fw_att_control_params.c b/src/modules/fw_att_control/fw_att_control_params.c index 97aa275de..be76524da 100644 --- a/src/modules/fw_att_control/fw_att_control_params.c +++ b/src/modules/fw_att_control/fw_att_control_params.c @@ -33,9 +33,9 @@ ****************************************************************************/ /** - * @file fw_pos_control_l1_params.c + * @file fw_att_control_params.c * - * Parameters defined by the L1 position control task + * Parameters defined by the fixed-wing attitude control task * * @author Lorenz Meier <lm@inf.ethz.ch> */ diff --git a/src/modules/mavlink/mavlink_receiver.cpp b/src/modules/mavlink/mavlink_receiver.cpp index c51a6de08..7b6fad658 100644 --- a/src/modules/mavlink/mavlink_receiver.cpp +++ b/src/modules/mavlink/mavlink_receiver.cpp @@ -72,6 +72,7 @@ #include <systemlib/airspeed.h> #include <mavlink/mavlink_log.h> #include <commander/px4_custom_mode.h> +#include <geo/geo.h> __BEGIN_DECLS @@ -99,11 +100,13 @@ static struct vehicle_command_s vcmd; static struct offboard_control_setpoint_s offboard_control_sp; struct vehicle_global_position_s hil_global_pos; +struct vehicle_local_position_s hil_local_pos; struct vehicle_attitude_s hil_attitude; struct vehicle_gps_position_s hil_gps; struct sensor_combined_s hil_sensors; struct battery_status_s hil_battery_status; static orb_advert_t pub_hil_global_pos = -1; +static orb_advert_t pub_hil_local_pos = -1; static orb_advert_t pub_hil_attitude = -1; static orb_advert_t pub_hil_gps = -1; static orb_advert_t pub_hil_sensors = -1; @@ -126,6 +129,11 @@ static orb_advert_t offboard_control_sp_pub = -1; static orb_advert_t vicon_position_pub = -1; static orb_advert_t telemetry_status_pub = -1; +// variables for HIL reference position +static int32_t lat0 = 0; +static int32_t lon0 = 0; +static double alt0 = 0; + static void handle_message(mavlink_message_t *msg) { @@ -374,16 +382,15 @@ handle_message(mavlink_message_t *msg) /* hil gyro */ static const float mrad2rad = 1.0e-3f; - hil_sensors.gyro_counter = hil_counter; hil_sensors.gyro_raw[0] = imu.xgyro / mrad2rad; hil_sensors.gyro_raw[1] = imu.ygyro / mrad2rad; hil_sensors.gyro_raw[2] = imu.zgyro / mrad2rad; hil_sensors.gyro_rad_s[0] = imu.xgyro; hil_sensors.gyro_rad_s[1] = imu.ygyro; hil_sensors.gyro_rad_s[2] = imu.zgyro; + hil_sensors.gyro_counter = hil_counter; /* accelerometer */ - hil_sensors.accelerometer_counter = hil_counter; static const float mg2ms2 = 9.8f / 1000.0f; hil_sensors.accelerometer_raw[0] = imu.xacc / mg2ms2; hil_sensors.accelerometer_raw[1] = imu.yacc / mg2ms2; @@ -393,6 +400,7 @@ handle_message(mavlink_message_t *msg) hil_sensors.accelerometer_m_s2[2] = imu.zacc; hil_sensors.accelerometer_mode = 0; // TODO what is this? hil_sensors.accelerometer_range_m_s2 = 32.7f; // int16 + hil_sensors.accelerometer_counter = hil_counter; /* adc */ hil_sensors.adc_voltage_v[0] = 0.0f; @@ -401,7 +409,6 @@ handle_message(mavlink_message_t *msg) /* magnetometer */ float mga2ga = 1.0e-3f; - hil_sensors.magnetometer_counter = hil_counter; hil_sensors.magnetometer_raw[0] = imu.xmag / mga2ga; hil_sensors.magnetometer_raw[1] = imu.ymag / mga2ga; hil_sensors.magnetometer_raw[2] = imu.zmag / mga2ga; @@ -411,15 +418,13 @@ handle_message(mavlink_message_t *msg) hil_sensors.magnetometer_range_ga = 32.7f; // int16 hil_sensors.magnetometer_mode = 0; // TODO what is this hil_sensors.magnetometer_cuttoff_freq_hz = 50.0f; + hil_sensors.magnetometer_counter = hil_counter; /* baro */ hil_sensors.baro_pres_mbar = imu.abs_pressure; hil_sensors.baro_alt_meter = imu.pressure_alt; hil_sensors.baro_temp_celcius = imu.temperature; - - hil_sensors.gyro_counter = hil_counter; - hil_sensors.magnetometer_counter = hil_counter; - hil_sensors.accelerometer_counter = hil_counter; + hil_sensors.baro_counter = hil_counter; /* differential pressure */ hil_sensors.differential_pressure_pa = imu.diff_pressure * 1e2f; //from hPa to Pa @@ -621,24 +626,61 @@ handle_message(mavlink_message_t *msg) orb_publish(ORB_ID(airspeed), pub_hil_airspeed, &airspeed); } - hil_global_pos.valid = true; - hil_global_pos.lat = hil_state.lat; - hil_global_pos.lon = hil_state.lon; - hil_global_pos.alt = hil_state.alt / 1000.0f; - hil_global_pos.vx = hil_state.vx / 100.0f; - hil_global_pos.vy = hil_state.vy / 100.0f; - hil_global_pos.vz = hil_state.vz / 100.0f; - - /* set timestamp and notify processes (broadcast) */ - hil_global_pos.timestamp = hrt_absolute_time(); + uint64_t timestamp = hrt_absolute_time(); + // publish global position if (pub_hil_global_pos > 0) { orb_publish(ORB_ID(vehicle_global_position), pub_hil_global_pos, &hil_global_pos); + // global position packet + hil_global_pos.timestamp = timestamp; + hil_global_pos.valid = true; + hil_global_pos.lat = hil_state.lat; + hil_global_pos.lon = hil_state.lon; + hil_global_pos.alt = hil_state.alt / 1000.0f; + hil_global_pos.vx = hil_state.vx / 100.0f; + hil_global_pos.vy = hil_state.vy / 100.0f; + hil_global_pos.vz = hil_state.vz / 100.0f; } else { pub_hil_global_pos = orb_advertise(ORB_ID(vehicle_global_position), &hil_global_pos); } + // publish local position + if (pub_hil_local_pos > 0) { + float x; + float y; + bool landed = hil_state.alt/1000.0f < (alt0 + 0.1); // XXX improve? + double lat = hil_state.lat*1e-7; + double lon = hil_state.lon*1e-7; + map_projection_project(lat, lon, &x, &y); + hil_local_pos.timestamp = timestamp; + hil_local_pos.xy_valid = true; + hil_local_pos.z_valid = true; + hil_local_pos.v_xy_valid = true; + hil_local_pos.v_z_valid = true; + hil_local_pos.x = x; + hil_local_pos.y = y; + hil_local_pos.z = alt0 - hil_state.alt/1000.0f; + hil_local_pos.vx = hil_state.vx/100.0f; + hil_local_pos.vy = hil_state.vy/100.0f; + hil_local_pos.vz = hil_state.vz/100.0f; + hil_local_pos.yaw = hil_attitude.yaw; + hil_local_pos.xy_global = true; + hil_local_pos.z_global = true; + hil_local_pos.ref_timestamp = timestamp; + hil_local_pos.ref_lat = hil_state.lat; + hil_local_pos.ref_lon = hil_state.lon; + hil_local_pos.ref_alt = alt0; + hil_local_pos.landed = landed; + orb_publish(ORB_ID(vehicle_local_position), pub_hil_local_pos, &hil_local_pos); + } else { + pub_hil_local_pos = orb_advertise(ORB_ID(vehicle_local_position), &hil_local_pos); + lat0 = hil_state.lat; + lon0 = hil_state.lon; + alt0 = hil_state.alt / 1000.0f; + map_projection_init(hil_state.lat, hil_state.lon); + } + /* Calculate Rotation Matrix */ math::Quaternion q(hil_state.attitude_quaternion); math::Dcm C_nb(q); diff --git a/src/modules/mavlink/missionlib.c b/src/modules/mavlink/missionlib.c index fa23f996f..124b3b2ae 100644 --- a/src/modules/mavlink/missionlib.c +++ b/src/modules/mavlink/missionlib.c @@ -276,7 +276,7 @@ void mavlink_missionlib_current_waypoint_changed(uint16_t index, float param1, next_setpoint_index = index + 1; } - while (next_setpoint_index < wpm->size - 1) { + while (next_setpoint_index < wpm->size) { if (wpm->waypoints[next_setpoint_index].frame == (int)MAV_FRAME_GLOBAL && (wpm->waypoints[next_setpoint_index].command == (int)MAV_CMD_NAV_WAYPOINT || wpm->waypoints[next_setpoint_index].command == (int)MAV_CMD_NAV_LOITER_TURNS || @@ -301,7 +301,7 @@ void mavlink_missionlib_current_waypoint_changed(uint16_t index, float param1, sp.lon = wpm->waypoints[last_setpoint_index].y * 1e7f; sp.altitude = wpm->waypoints[last_setpoint_index].z; sp.altitude_is_relative = false; - sp.yaw = (wpm->waypoints[last_setpoint_index].param4 / 180.0f) * M_PI_F - M_PI_F; + sp.yaw = _wrap_pi(wpm->waypoints[last_setpoint_index].param4 / 180.0f * M_PI_F); set_special_fields(wpm->waypoints[last_setpoint_index].param1, wpm->waypoints[last_setpoint_index].param2, wpm->waypoints[last_setpoint_index].param3, @@ -317,7 +317,7 @@ void mavlink_missionlib_current_waypoint_changed(uint16_t index, float param1, sp.lon = wpm->waypoints[next_setpoint_index].y * 1e7f; sp.altitude = wpm->waypoints[next_setpoint_index].z; sp.altitude_is_relative = false; - sp.yaw = (wpm->waypoints[next_setpoint_index].param4 / 180.0f) * M_PI_F - M_PI_F; + sp.yaw = _wrap_pi(wpm->waypoints[next_setpoint_index].param4 / 180.0f * M_PI_F); set_special_fields(wpm->waypoints[next_setpoint_index].param1, wpm->waypoints[next_setpoint_index].param2, wpm->waypoints[next_setpoint_index].param3, @@ -343,7 +343,7 @@ void mavlink_missionlib_current_waypoint_changed(uint16_t index, float param1, sp.lon = param6_lon_y * 1e7f; sp.altitude = param7_alt_z; sp.altitude_is_relative = true; - sp.yaw = (param4 / 180.0f) * M_PI_F - M_PI_F; + sp.yaw = _wrap_pi(param4 / 180.0f * M_PI_F); set_special_fields(param1, param2, param3, param4, command, &sp); /* Initialize publication if necessary */ @@ -364,7 +364,7 @@ void mavlink_missionlib_current_waypoint_changed(uint16_t index, float param1, sp.x = param5_lat_x; sp.y = param6_lon_y; sp.z = param7_alt_z; - sp.yaw = (param4 / 180.0f) * M_PI_F - M_PI_F; + sp.yaw = _wrap_pi(param4 / 180.0f * M_PI_F); /* Initialize publication if necessary */ if (local_position_setpoint_pub < 0) { diff --git a/src/modules/mavlink/orb_listener.c b/src/modules/mavlink/orb_listener.c index f6860930c..92b1b45be 100644 --- a/src/modules/mavlink/orb_listener.c +++ b/src/modules/mavlink/orb_listener.c @@ -54,6 +54,7 @@ #include <sys/prctl.h> #include <stdlib.h> #include <poll.h> +#include <lib/geo/geo.h> #include <mavlink/mavlink_log.h> @@ -72,9 +73,9 @@ struct vehicle_status_s v_status; struct rc_channels_s rc; struct rc_input_values rc_raw; struct actuator_armed_s armed; -struct actuator_controls_effective_s actuators_effective_0; struct actuator_controls_s actuators_0; struct vehicle_attitude_s att; +struct airspeed_s airspeed; struct mavlink_subscriptions mavlink_subs; @@ -92,6 +93,8 @@ static unsigned int gps_counter; */ static uint64_t last_sensor_timestamp; +static hrt_abstime last_sent_vfr = 0; + static void *uorb_receive_thread(void *arg); struct listener { @@ -116,7 +119,6 @@ static void l_attitude_setpoint(const struct listener *l); static void l_actuator_outputs(const struct listener *l); static void l_actuator_armed(const struct listener *l); static void l_manual_control_setpoint(const struct listener *l); -static void l_vehicle_attitude_controls_effective(const struct listener *l); static void l_vehicle_attitude_controls(const struct listener *l); static void l_debug_key_value(const struct listener *l); static void l_optical_flow(const struct listener *l); @@ -144,7 +146,6 @@ static const struct listener listeners[] = { {l_actuator_armed, &mavlink_subs.armed_sub, 0}, {l_manual_control_setpoint, &mavlink_subs.man_control_sp_sub, 0}, {l_vehicle_attitude_controls, &mavlink_subs.actuators_sub, 0}, - {l_vehicle_attitude_controls_effective, &mavlink_subs.actuators_effective_sub, 0}, {l_debug_key_value, &mavlink_subs.debug_key_value, 0}, {l_optical_flow, &mavlink_subs.optical_flow, 0}, {l_vehicle_rates_setpoint, &mavlink_subs.rates_setpoint_sub, 0}, @@ -229,7 +230,7 @@ l_vehicle_attitude(const struct listener *l) /* copy attitude data into local buffer */ orb_copy(ORB_ID(vehicle_attitude), mavlink_subs.att_sub, &att); - if (gcs_link) + if (gcs_link) { /* send sensor values */ mavlink_msg_attitude_send(MAVLINK_COMM_0, last_sensor_timestamp / 1000, @@ -239,6 +240,30 @@ l_vehicle_attitude(const struct listener *l) att.rollspeed, att.pitchspeed, att.yawspeed); + + /* limit VFR message rate to 10Hz */ + hrt_abstime t = hrt_absolute_time(); + if (t >= last_sent_vfr + 100000) { + last_sent_vfr = t; + float groundspeed = sqrtf(global_pos.vx * global_pos.vx + global_pos.vy * global_pos.vy); + uint16_t heading = _wrap_2pi(att.yaw) * M_RAD_TO_DEG_F; + float throttle = armed.armed ? actuators_0.control[3] * 100.0f : 0.0f; + mavlink_msg_vfr_hud_send(MAVLINK_COMM_0, airspeed.true_airspeed_m_s, groundspeed, heading, throttle, global_pos.alt, -global_pos.vz); + } + + /* send quaternion values if it exists */ + if(att.q_valid) { + mavlink_msg_attitude_quaternion_send(MAVLINK_COMM_0, + last_sensor_timestamp / 1000, + att.q[0], + att.q[1], + att.q[2], + att.q[3], + att.rollspeed, + att.pitchspeed, + att.yawspeed); + } + } attitude_counter++; } @@ -252,13 +277,7 @@ l_vehicle_gps_position(const struct listener *l) orb_copy(ORB_ID(vehicle_gps_position), mavlink_subs.gps_sub, &gps); /* GPS COG is 0..2PI in degrees * 1e2 */ - float cog_deg = gps.cog_rad; - - if (cog_deg > M_PI_F) - cog_deg -= 2.0f * M_PI_F; - - cog_deg *= M_RAD_TO_DEG_F; - + float cog_deg = _wrap_2pi(gps.cog_rad) * M_RAD_TO_DEG_F; /* GPS position */ mavlink_msg_gps_raw_int_send(MAVLINK_COMM_0, @@ -329,20 +348,26 @@ l_input_rc(const struct listener *l) /* copy rc channels into local buffer */ orb_copy(ORB_ID(input_rc), mavlink_subs.input_rc_sub, &rc_raw); - if (gcs_link) - /* Channels are sent in MAVLink main loop at a fixed interval */ - mavlink_msg_rc_channels_raw_send(chan, - rc_raw.timestamp / 1000, - 0, - (rc_raw.channel_count > 0) ? rc_raw.values[0] : UINT16_MAX, - (rc_raw.channel_count > 1) ? rc_raw.values[1] : UINT16_MAX, - (rc_raw.channel_count > 2) ? rc_raw.values[2] : UINT16_MAX, - (rc_raw.channel_count > 3) ? rc_raw.values[3] : UINT16_MAX, - (rc_raw.channel_count > 4) ? rc_raw.values[4] : UINT16_MAX, - (rc_raw.channel_count > 5) ? rc_raw.values[5] : UINT16_MAX, - (rc_raw.channel_count > 6) ? rc_raw.values[6] : UINT16_MAX, - (rc_raw.channel_count > 7) ? rc_raw.values[7] : UINT16_MAX, - 255); + if (gcs_link) { + + const unsigned port_width = 8; + + for (unsigned i = 0; (i * port_width) < (rc_raw.channel_count + port_width); i++) { + /* Channels are sent in MAVLink main loop at a fixed interval */ + mavlink_msg_rc_channels_raw_send(chan, + rc_raw.timestamp / 1000, + i, + (rc_raw.channel_count > (i * port_width) + 0) ? rc_raw.values[(i * port_width) + 0] : UINT16_MAX, + (rc_raw.channel_count > (i * port_width) + 1) ? rc_raw.values[(i * port_width) + 1] : UINT16_MAX, + (rc_raw.channel_count > (i * port_width) + 2) ? rc_raw.values[(i * port_width) + 2] : UINT16_MAX, + (rc_raw.channel_count > (i * port_width) + 3) ? rc_raw.values[(i * port_width) + 3] : UINT16_MAX, + (rc_raw.channel_count > (i * port_width) + 4) ? rc_raw.values[(i * port_width) + 4] : UINT16_MAX, + (rc_raw.channel_count > (i * port_width) + 5) ? rc_raw.values[(i * port_width) + 5] : UINT16_MAX, + (rc_raw.channel_count > (i * port_width) + 6) ? rc_raw.values[(i * port_width) + 6] : UINT16_MAX, + (rc_raw.channel_count > (i * port_width) + 7) ? rc_raw.values[(i * port_width) + 7] : UINT16_MAX, + rc_raw.rssi); + } + } } void @@ -351,28 +376,16 @@ l_global_position(const struct listener *l) /* copy global position data into local buffer */ orb_copy(ORB_ID(vehicle_global_position), mavlink_subs.global_pos_sub, &global_pos); - uint64_t timestamp = global_pos.timestamp; - int32_t lat = global_pos.lat; - int32_t lon = global_pos.lon; - int32_t alt = (int32_t)(global_pos.alt * 1000); - int32_t relative_alt = (int32_t)(global_pos.relative_alt * 1000.0f); - int16_t vx = (int16_t)(global_pos.vx * 100.0f); - int16_t vy = (int16_t)(global_pos.vy * 100.0f); - int16_t vz = (int16_t)(global_pos.vz * 100.0f); - - /* heading in degrees * 10, from 0 to 36.000) */ - uint16_t hdg = (global_pos.yaw / M_PI_F) * (180.0f * 10.0f) + (180.0f * 10.0f); - mavlink_msg_global_position_int_send(MAVLINK_COMM_0, - timestamp / 1000, - lat, - lon, - alt, - relative_alt, - vx, - vy, - vz, - hdg); + global_pos.timestamp / 1000, + global_pos.lat, + global_pos.lon, + global_pos.alt * 1000.0f, + global_pos.relative_alt * 1000.0f, + global_pos.vx * 100.0f, + global_pos.vy * 100.0f, + global_pos.vz * 100.0f, + _wrap_2pi(global_pos.yaw) * M_RAD_TO_DEG_F * 100.0f); } void @@ -410,8 +423,8 @@ l_global_position_setpoint(const struct listener *l) coordinate_frame, global_sp.lat, global_sp.lon, - global_sp.altitude, - global_sp.yaw); + global_sp.altitude * 1000.0f, + global_sp.yaw * M_RAD_TO_DEG_F * 100.0f); } void @@ -482,7 +495,8 @@ l_actuator_outputs(const struct listener *l) if (gcs_link) { mavlink_msg_servo_output_raw_send(MAVLINK_COMM_0, last_sensor_timestamp / 1000, - l->arg /* port number */, + l->arg /* port number - needs GCS support */, + /* QGC has port number support already */ act_outputs.output[0], act_outputs.output[1], act_outputs.output[2], @@ -492,8 +506,8 @@ l_actuator_outputs(const struct listener *l) act_outputs.output[6], act_outputs.output[7]); - /* only send in HIL mode */ - if (mavlink_hil_enabled && armed.armed) { + /* only send in HIL mode and only send first group for HIL */ + if (mavlink_hil_enabled && armed.armed && ids[l->arg] == ORB_ID(actuator_outputs_0)) { /* translate the current syste state to mavlink state and mode */ uint8_t mavlink_state = 0; @@ -590,32 +604,6 @@ l_manual_control_setpoint(const struct listener *l) } void -l_vehicle_attitude_controls_effective(const struct listener *l) -{ - orb_copy(ORB_ID_VEHICLE_ATTITUDE_CONTROLS_EFFECTIVE, mavlink_subs.actuators_effective_sub, &actuators_effective_0); - - if (gcs_link) { - /* send, add spaces so that string buffer is at least 10 chars long */ - mavlink_msg_named_value_float_send(MAVLINK_COMM_0, - last_sensor_timestamp / 1000, - "eff ctrl0 ", - actuators_effective_0.control_effective[0]); - mavlink_msg_named_value_float_send(MAVLINK_COMM_0, - last_sensor_timestamp / 1000, - "eff ctrl1 ", - actuators_effective_0.control_effective[1]); - mavlink_msg_named_value_float_send(MAVLINK_COMM_0, - last_sensor_timestamp / 1000, - "eff ctrl2 ", - actuators_effective_0.control_effective[2]); - mavlink_msg_named_value_float_send(MAVLINK_COMM_0, - last_sensor_timestamp / 1000, - "eff ctrl3 ", - actuators_effective_0.control_effective[3]); - } -} - -void l_vehicle_attitude_controls(const struct listener *l) { orb_copy(ORB_ID_VEHICLE_ATTITUDE_CONTROLS, mavlink_subs.actuators_sub, &actuators_0); @@ -681,17 +669,7 @@ l_home(const struct listener *l) void l_airspeed(const struct listener *l) { - struct airspeed_s airspeed; - orb_copy(ORB_ID(airspeed), mavlink_subs.airspeed_sub, &airspeed); - - float groundspeed = sqrtf(global_pos.vx * global_pos.vx + global_pos.vy * global_pos.vy); - uint16_t heading = (att.yaw + M_PI_F) / M_PI_F * 180.0f; - float throttle = actuators_effective_0.control_effective[3] * (UINT16_MAX - 1); - float alt = global_pos.relative_alt; - float climb = -global_pos.vz; - - mavlink_msg_vfr_hud_send(MAVLINK_COMM_0, airspeed.true_airspeed_m_s, groundspeed, heading, throttle, alt, climb); } void @@ -835,9 +813,6 @@ uorb_receive_start(void) orb_set_interval(mavlink_subs.man_control_sp_sub, 100); /* 10Hz updates */ /* --- ACTUATOR CONTROL VALUE --- */ - mavlink_subs.actuators_effective_sub = orb_subscribe(ORB_ID_VEHICLE_ATTITUDE_CONTROLS_EFFECTIVE); - orb_set_interval(mavlink_subs.actuators_effective_sub, 100); /* 10Hz updates */ - mavlink_subs.actuators_sub = orb_subscribe(ORB_ID_VEHICLE_ATTITUDE_CONTROLS); orb_set_interval(mavlink_subs.actuators_sub, 100); /* 10Hz updates */ @@ -849,7 +824,7 @@ uorb_receive_start(void) mavlink_subs.optical_flow = orb_subscribe(ORB_ID(optical_flow)); orb_set_interval(mavlink_subs.optical_flow, 200); /* 5Hz updates */ - /* --- AIRSPEED / VFR / HUD --- */ + /* --- AIRSPEED --- */ mavlink_subs.airspeed_sub = orb_subscribe(ORB_ID(airspeed)); orb_set_interval(mavlink_subs.airspeed_sub, 200); /* 5Hz updates */ diff --git a/src/modules/multirotor_att_control/multirotor_rate_control.c b/src/modules/multirotor_att_control/multirotor_rate_control.c index adb63186c..86ac0e4ff 100644 --- a/src/modules/multirotor_att_control/multirotor_rate_control.c +++ b/src/modules/multirotor_att_control/multirotor_rate_control.c @@ -59,31 +59,23 @@ #include <systemlib/err.h> #include <drivers/drv_hrt.h> -PARAM_DEFINE_FLOAT(MC_YAWRATE_P, 0.3f); /* same on Flamewheel */ +PARAM_DEFINE_FLOAT(MC_YAWRATE_P, 0.3f); PARAM_DEFINE_FLOAT(MC_YAWRATE_D, 0.005f); PARAM_DEFINE_FLOAT(MC_YAWRATE_I, 0.2f); -//PARAM_DEFINE_FLOAT(MC_YAWRATE_AWU, 0.0f); -//PARAM_DEFINE_FLOAT(MC_YAWRATE_LIM, 1.0f); -PARAM_DEFINE_FLOAT(MC_ATTRATE_P, 0.09f); /* 0.15 F405 Flamewheel */ +PARAM_DEFINE_FLOAT(MC_ATTRATE_P, 0.09f); PARAM_DEFINE_FLOAT(MC_ATTRATE_D, 0.002f); PARAM_DEFINE_FLOAT(MC_ATTRATE_I, 0.0f); -//PARAM_DEFINE_FLOAT(MC_ATTRATE_AWU, 0.05f); -//PARAM_DEFINE_FLOAT(MC_ATTRATE_LIM, 1.0f); /**< roughly < 500 deg/s limit */ struct mc_rate_control_params { float yawrate_p; float yawrate_d; float yawrate_i; - //float yawrate_awu; - //float yawrate_lim; float attrate_p; float attrate_d; float attrate_i; - //float attrate_awu; - //float attrate_lim; float rate_lim; }; @@ -93,14 +85,10 @@ struct mc_rate_control_param_handles { param_t yawrate_p; param_t yawrate_i; param_t yawrate_d; - //param_t yawrate_awu; - //param_t yawrate_lim; param_t attrate_p; param_t attrate_i; param_t attrate_d; - //param_t attrate_awu; - //param_t attrate_lim; }; /** @@ -122,14 +110,10 @@ static int parameters_init(struct mc_rate_control_param_handles *h) h->yawrate_p = param_find("MC_YAWRATE_P"); h->yawrate_i = param_find("MC_YAWRATE_I"); h->yawrate_d = param_find("MC_YAWRATE_D"); - //h->yawrate_awu = param_find("MC_YAWRATE_AWU"); - //h->yawrate_lim = param_find("MC_YAWRATE_LIM"); h->attrate_p = param_find("MC_ATTRATE_P"); h->attrate_i = param_find("MC_ATTRATE_I"); h->attrate_d = param_find("MC_ATTRATE_D"); - //h->attrate_awu = param_find("MC_ATTRATE_AWU"); - //h->attrate_lim = param_find("MC_ATTRATE_LIM"); return OK; } @@ -139,14 +123,10 @@ static int parameters_update(const struct mc_rate_control_param_handles *h, stru param_get(h->yawrate_p, &(p->yawrate_p)); param_get(h->yawrate_i, &(p->yawrate_i)); param_get(h->yawrate_d, &(p->yawrate_d)); - //param_get(h->yawrate_awu, &(p->yawrate_awu)); - //param_get(h->yawrate_lim, &(p->yawrate_lim)); param_get(h->attrate_p, &(p->attrate_p)); param_get(h->attrate_i, &(p->attrate_i)); param_get(h->attrate_d, &(p->attrate_d)); - //param_get(h->attrate_awu, &(p->attrate_awu)); - //param_get(h->attrate_lim, &(p->attrate_lim)); return OK; } @@ -168,6 +148,7 @@ void multirotor_control_rates(const struct vehicle_rates_setpoint_s *rate_sp, static PID_t pitch_rate_controller; static PID_t roll_rate_controller; + static PID_t yaw_rate_controller; static struct mc_rate_control_params p; static struct mc_rate_control_param_handles h; @@ -182,7 +163,7 @@ void multirotor_control_rates(const struct vehicle_rates_setpoint_s *rate_sp, pid_init(&pitch_rate_controller, p.attrate_p, p.attrate_i, p.attrate_d, 1.0f, 1.0f, PID_MODE_DERIVATIV_CALC_NO_SP, 0.003f); pid_init(&roll_rate_controller, p.attrate_p, p.attrate_i, p.attrate_d, 1.0f, 1.0f, PID_MODE_DERIVATIV_CALC_NO_SP, 0.003f); - + pid_init(&yaw_rate_controller, p.yawrate_p, p.yawrate_i, p.yawrate_d, 1.0f, 1.0f, PID_MODE_DERIVATIV_CALC_NO_SP, 0.003f); } /* load new parameters with lower rate */ @@ -191,35 +172,24 @@ void multirotor_control_rates(const struct vehicle_rates_setpoint_s *rate_sp, parameters_update(&h, &p); pid_set_parameters(&pitch_rate_controller, p.attrate_p, p.attrate_i, p.attrate_d, 1.0f, 1.0f); pid_set_parameters(&roll_rate_controller, p.attrate_p, p.attrate_i, p.attrate_d, 1.0f, 1.0f); + pid_set_parameters(&yaw_rate_controller, p.yawrate_p, p.yawrate_i, p.yawrate_d, 1.0f, 1.0f); } /* reset integrals if needed */ if (reset_integral) { pid_reset_integral(&pitch_rate_controller); pid_reset_integral(&roll_rate_controller); - // TODO pid_reset_integral(&yaw_rate_controller); + pid_reset_integral(&yaw_rate_controller); } - /* control pitch (forward) output */ - float pitch_control = pid_calculate(&pitch_rate_controller, rate_sp->pitch , - rates[1], 0.0f, deltaT); - - /* control roll (left/right) output */ - float roll_control = pid_calculate(&roll_rate_controller, rate_sp->roll , - rates[0], 0.0f, deltaT); - - /* control yaw rate */ //XXX use library here - float yaw_rate_control = p.yawrate_p * (rate_sp->yaw - rates[2]); - - /* increase resilience to faulty control inputs */ - if (!isfinite(yaw_rate_control)) { - yaw_rate_control = 0.0f; - warnx("rej. NaN ctrl yaw"); - } + /* run pitch, roll and yaw controllers */ + float pitch_control = pid_calculate(&pitch_rate_controller, rate_sp->pitch, rates[1], 0.0f, deltaT); + float roll_control = pid_calculate(&roll_rate_controller, rate_sp->roll, rates[0], 0.0f, deltaT); + float yaw_control = pid_calculate(&yaw_rate_controller, rate_sp->yaw, rates[2], 0.0f, deltaT); actuators->control[0] = roll_control; actuators->control[1] = pitch_control; - actuators->control[2] = yaw_rate_control; + actuators->control[2] = yaw_control; actuators->control[3] = rate_sp->thrust; motor_skip_counter++; diff --git a/src/modules/multirotor_pos_control/multirotor_pos_control.c b/src/modules/multirotor_pos_control/multirotor_pos_control.c index 36dd370fb..3d23d0c09 100644 --- a/src/modules/multirotor_pos_control/multirotor_pos_control.c +++ b/src/modules/multirotor_pos_control/multirotor_pos_control.c @@ -471,7 +471,10 @@ static int multirotor_pos_control_thread_main(int argc, char *argv[]) } else { local_pos_sp.z = local_pos.ref_alt - global_pos_sp.altitude; } - att_sp.yaw_body = global_pos_sp.yaw; + /* update yaw setpoint only if value is valid */ + if (isfinite(global_pos_sp.yaw) && fabsf(global_pos_sp.yaw) < M_TWOPI) { + att_sp.yaw_body = global_pos_sp.yaw; + } mavlink_log_info(mavlink_fd, "[mpc] new sp: %.7f, %.7f (%.2f, %.2f)", (double)sp_lat, sp_lon, (double)local_pos_sp.x, (double)local_pos_sp.y); diff --git a/src/modules/position_estimator_inav/position_estimator_inav_main.c b/src/modules/position_estimator_inav/position_estimator_inav_main.c index 10007bf96..3084b6d92 100644 --- a/src/modules/position_estimator_inav/position_estimator_inav_main.c +++ b/src/modules/position_estimator_inav/position_estimator_inav_main.c @@ -236,13 +236,13 @@ int position_estimator_inav_thread_main(int argc, char *argv[]) if (ret < 0) { /* poll error */ - errx(1, "subscriptions poll error on init."); + mavlink_log_info(mavlink_fd, "[inav] poll error on init"); } else if (ret > 0) { if (fds_init[0].revents & POLLIN) { orb_copy(ORB_ID(sensor_combined), sensor_combined_sub, &sensor); - if (wait_baro && sensor.baro_counter > baro_counter) { + if (wait_baro && sensor.baro_counter != baro_counter) { baro_counter = sensor.baro_counter; /* mean calculation over several measurements */ @@ -320,8 +320,7 @@ int position_estimator_inav_thread_main(int argc, char *argv[]) if (ret < 0) { /* poll error */ - warnx("subscriptions poll error."); - thread_should_exit = true; + mavlink_log_info(mavlink_fd, "[inav] poll error on init"); continue; } else if (ret > 0) { @@ -355,7 +354,7 @@ int position_estimator_inav_thread_main(int argc, char *argv[]) if (fds[4].revents & POLLIN) { orb_copy(ORB_ID(sensor_combined), sensor_combined_sub, &sensor); - if (sensor.accelerometer_counter > accel_counter) { + if (sensor.accelerometer_counter != accel_counter) { if (att.R_valid) { /* correct accel bias, now only for Z */ sensor.accelerometer_m_s2[2] -= accel_bias[2]; @@ -381,7 +380,7 @@ int position_estimator_inav_thread_main(int argc, char *argv[]) accel_updates++; } - if (sensor.baro_counter > baro_counter) { + if (sensor.baro_counter != baro_counter) { baro_corr = - sensor.baro_alt_meter - z_est[0]; baro_counter = sensor.baro_counter; baro_updates++; diff --git a/src/modules/px4iofirmware/controls.c b/src/modules/px4iofirmware/controls.c index 5c621cfb2..541eed0e1 100644 --- a/src/modules/px4iofirmware/controls.c +++ b/src/modules/px4iofirmware/controls.c @@ -50,7 +50,7 @@ #define RC_CHANNEL_HIGH_THRESH 5000 #define RC_CHANNEL_LOW_THRESH -5000 -static bool ppm_input(uint16_t *values, uint16_t *num_values); +static bool ppm_input(uint16_t *values, uint16_t *num_values, uint16_t *frame_len); static perf_counter_t c_gather_dsm; static perf_counter_t c_gather_sbus; @@ -66,7 +66,7 @@ controls_init(void) sbus_init("/dev/ttyS2"); /* default to a 1:1 input map, all enabled */ - for (unsigned i = 0; i < PX4IO_CONTROL_CHANNELS; i++) { + for (unsigned i = 0; i < PX4IO_RC_INPUT_CHANNELS; i++) { unsigned base = PX4IO_P_RC_CONFIG_STRIDE * i; r_page_rc_input_config[base + PX4IO_P_RC_CONFIG_OPTIONS] = 0; @@ -94,6 +94,9 @@ controls_tick() { * other. Don't do that. */ + /* receive signal strenght indicator (RSSI). 0 = no connection, 255: perfect connection */ + uint16_t rssi = 0; + perf_begin(c_gather_dsm); uint16_t temp_count = r_raw_rc_count; bool dsm_updated = dsm_input(r_raw_rc_values, &temp_count); @@ -104,14 +107,15 @@ controls_tick() { r_status_flags |= PX4IO_P_STATUS_FLAGS_RC_DSM11; else r_status_flags &= ~PX4IO_P_STATUS_FLAGS_RC_DSM11; + + rssi = 255; } perf_end(c_gather_dsm); perf_begin(c_gather_sbus); - bool sbus_updated = sbus_input(r_raw_rc_values, &r_raw_rc_count, PX4IO_CONTROL_CHANNELS /* XXX this should be INPUT channels, once untangled */); + bool sbus_updated = sbus_input(r_raw_rc_values, &r_raw_rc_count, &rssi, PX4IO_RC_INPUT_CHANNELS); if (sbus_updated) { r_status_flags |= PX4IO_P_STATUS_FLAGS_RC_SBUS; - r_raw_rc_count = 8; } perf_end(c_gather_sbus); @@ -121,11 +125,20 @@ controls_tick() { * disable the PPM decoder completely if we have S.bus signal. */ perf_begin(c_gather_ppm); - bool ppm_updated = ppm_input(r_raw_rc_values, &r_raw_rc_count); - if (ppm_updated) + bool ppm_updated = ppm_input(r_raw_rc_values, &r_raw_rc_count, &r_page_status[PX4IO_P_STATUS_RC_DATA]); + if (ppm_updated) { + + /* XXX sample RSSI properly here */ + rssi = 255; + r_status_flags |= PX4IO_P_STATUS_FLAGS_RC_PPM; + } perf_end(c_gather_ppm); + /* limit number of channels to allowable data size */ + if (r_raw_rc_count > PX4IO_RC_INPUT_CHANNELS) + r_raw_rc_count = PX4IO_RC_INPUT_CHANNELS; + /* * In some cases we may have received a frame, but input has still * been lost. @@ -197,14 +210,16 @@ controls_tick() { /* and update the scaled/mapped version */ unsigned mapped = conf[PX4IO_P_RC_CONFIG_ASSIGNMENT]; - ASSERT(mapped < PX4IO_CONTROL_CHANNELS); + if (mapped < PX4IO_CONTROL_CHANNELS) { - /* invert channel if pitch - pulling the lever down means pitching up by convention */ - if (mapped == 1) /* roll, pitch, yaw, throttle, override is the standard order */ - scaled = -scaled; + /* invert channel if pitch - pulling the lever down means pitching up by convention */ + if (mapped == 1) /* roll, pitch, yaw, throttle, override is the standard order */ + scaled = -scaled; + + r_rc_values[mapped] = SIGNED_TO_REG(scaled); + assigned_channels |= (1 << mapped); - r_rc_values[mapped] = SIGNED_TO_REG(scaled); - assigned_channels |= (1 << mapped); + } } } @@ -221,7 +236,7 @@ controls_tick() { * This might happen if a protocol-based receiver returns an update * that contains no channels that we have mapped. */ - if (assigned_channels == 0) { + if (assigned_channels == 0 || rssi == 0) { rc_input_lost = true; } else { /* set RC OK flag */ @@ -306,7 +321,7 @@ controls_tick() { } static bool -ppm_input(uint16_t *values, uint16_t *num_values) +ppm_input(uint16_t *values, uint16_t *num_values, uint16_t *frame_len) { bool result = false; @@ -321,8 +336,8 @@ ppm_input(uint16_t *values, uint16_t *num_values) /* PPM data exists, copy it */ *num_values = ppm_decoded_channels; - if (*num_values > PX4IO_CONTROL_CHANNELS) - *num_values = PX4IO_CONTROL_CHANNELS; + if (*num_values > PX4IO_RC_INPUT_CHANNELS) + *num_values = PX4IO_RC_INPUT_CHANNELS; for (unsigned i = 0; i < *num_values; i++) values[i] = ppm_buffer[i]; @@ -330,6 +345,10 @@ ppm_input(uint16_t *values, uint16_t *num_values) /* clear validity */ ppm_last_valid_decode = 0; + /* store PPM frame length */ + if (num_values) + *frame_len = ppm_frame_length; + /* good if we got any channels */ result = (*num_values > 0); } diff --git a/src/modules/px4iofirmware/dsm.c b/src/modules/px4iofirmware/dsm.c index fd3b72015..60eda2319 100644 --- a/src/modules/px4iofirmware/dsm.c +++ b/src/modules/px4iofirmware/dsm.c @@ -203,6 +203,12 @@ dsm_guess_format(bool reset) int dsm_init(const char *device) { + +#ifdef CONFIG_ARCH_BOARD_PX4IO_V2 + // enable power on DSM connector + POWER_SPEKTRUM(true); +#endif + if (dsm_fd < 0) dsm_fd = open(device, O_RDONLY | O_NONBLOCK); @@ -355,7 +361,7 @@ dsm_decode(hrt_abstime frame_time, uint16_t *values, uint16_t *num_values) continue; /* ignore channels out of range */ - if (channel >= PX4IO_INPUT_CHANNELS) + if (channel >= PX4IO_RC_INPUT_CHANNELS) continue; /* update the decoded channel count */ diff --git a/src/modules/px4iofirmware/mixer.cpp b/src/modules/px4iofirmware/mixer.cpp index 05897b4ce..e55ef784a 100644 --- a/src/modules/px4iofirmware/mixer.cpp +++ b/src/modules/px4iofirmware/mixer.cpp @@ -77,7 +77,8 @@ enum mixer_source { MIX_NONE, MIX_FMU, MIX_OVERRIDE, - MIX_FAILSAFE + MIX_FAILSAFE, + MIX_OVERRIDE_FMU_OK }; static mixer_source source; @@ -135,10 +136,19 @@ mixer_tick(void) if ( (r_status_flags & PX4IO_P_STATUS_FLAGS_OVERRIDE) && (r_status_flags & PX4IO_P_STATUS_FLAGS_RC_OK) && (r_status_flags & PX4IO_P_STATUS_FLAGS_MIXER_OK) && - !(r_setup_arming & PX4IO_P_SETUP_ARMING_RC_HANDLING_DISABLED)) { + !(r_setup_arming & PX4IO_P_SETUP_ARMING_RC_HANDLING_DISABLED) && + !(r_status_flags & PX4IO_P_STATUS_FLAGS_FMU_OK)) { /* if allowed, mix from RC inputs directly */ source = MIX_OVERRIDE; + } else if ( (r_status_flags & PX4IO_P_STATUS_FLAGS_OVERRIDE) && + (r_status_flags & PX4IO_P_STATUS_FLAGS_RC_OK) && + (r_status_flags & PX4IO_P_STATUS_FLAGS_MIXER_OK) && + !(r_setup_arming & PX4IO_P_SETUP_ARMING_RC_HANDLING_DISABLED) && + (r_status_flags & PX4IO_P_STATUS_FLAGS_FMU_OK)) { + + /* if allowed, mix from RC inputs directly up to available rc channels */ + source = MIX_OVERRIDE_FMU_OK; } } @@ -185,7 +195,7 @@ mixer_tick(void) r_page_servos[i] = r_page_servo_failsafe[i]; /* safe actuators for FMU feedback */ - r_page_actuators[i] = (r_page_servos[i] - 1500) / 600.0f; + r_page_actuators[i] = FLOAT_TO_REG((r_page_servos[i] - 1500) / 600.0f); } @@ -201,6 +211,10 @@ mixer_tick(void) for (unsigned i = mixed; i < PX4IO_SERVO_COUNT; i++) r_page_servos[i] = 0; + + for (unsigned i = 0; i < PX4IO_SERVO_COUNT; i++) { + r_page_actuators[i] = FLOAT_TO_REG(outputs[i]); + } } if ((should_arm || should_always_enable_pwm) && !mixer_servos_armed) { @@ -236,24 +250,35 @@ mixer_callback(uintptr_t handle, uint8_t control_index, float &control) { - if (control_group != 0) + if (control_group > 3) return -1; switch (source) { case MIX_FMU: - if (control_index < PX4IO_CONTROL_CHANNELS) { - control = REG_TO_FLOAT(r_page_controls[control_index]); + if (control_index < PX4IO_CONTROL_CHANNELS && control_group < PX4IO_CONTROL_GROUPS ) { + control = REG_TO_FLOAT(r_page_controls[CONTROL_PAGE_INDEX(control_group, control_index)]); break; } return -1; case MIX_OVERRIDE: - if (r_page_rc_input[PX4IO_P_RC_VALID] & (1 << control_index)) { + if (r_page_rc_input[PX4IO_P_RC_VALID] & (1 << CONTROL_PAGE_INDEX(control_group, control_index))) { control = REG_TO_FLOAT(r_page_rc_input[PX4IO_P_RC_BASE + control_index]); break; } return -1; + case MIX_OVERRIDE_FMU_OK: + /* FMU is ok but we are in override mode, use direct rc control for the available rc channels. The remaining channels are still controlled by the fmu */ + if (r_page_rc_input[PX4IO_P_RC_VALID] & (1 << CONTROL_PAGE_INDEX(control_group, control_index))) { + control = REG_TO_FLOAT(r_page_rc_input[PX4IO_P_RC_BASE + control_index]); + break; + } else if (control_index < PX4IO_CONTROL_CHANNELS && control_group < PX4IO_CONTROL_GROUPS) { + control = REG_TO_FLOAT(r_page_controls[CONTROL_PAGE_INDEX(control_group, control_index)]); + break; + } + return -1; + case MIX_FAILSAFE: case MIX_NONE: control = 0.0f; diff --git a/src/modules/px4iofirmware/protocol.h b/src/modules/px4iofirmware/protocol.h index 5e5396782..e5bef6eb3 100644 --- a/src/modules/px4iofirmware/protocol.h +++ b/src/modules/px4iofirmware/protocol.h @@ -1,6 +1,6 @@ /**************************************************************************** * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. + * Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -63,7 +63,7 @@ * readable pages to be densely packed. Page numbers do not need to be * packed. * - * Definitions marked 1 are only valid on PX4IOv1 boards. Likewise, + * Definitions marked [1] are only valid on PX4IOv1 boards. Likewise, * [2] denotes definitions specific to the PX4IOv2 board. */ @@ -76,6 +76,9 @@ #define PX4IO_PROTOCOL_VERSION 4 +/* maximum allowable sizes on this protocol version */ +#define PX4IO_PROTOCOL_MAX_CONTROL_COUNT 8 /**< The protocol does not support more than set here, individual units might support less - see PX4IO_P_CONFIG_CONTROL_COUNT */ + /* static configuration page */ #define PX4IO_PAGE_CONFIG 0 #define PX4IO_P_CONFIG_PROTOCOL_VERSION 0 /* PX4IO_PROTOCOL_VERSION */ @@ -87,6 +90,7 @@ #define PX4IO_P_CONFIG_RC_INPUT_COUNT 6 /* hardcoded max R/C input count supported */ #define PX4IO_P_CONFIG_ADC_INPUT_COUNT 7 /* hardcoded max ADC inputs */ #define PX4IO_P_CONFIG_RELAY_COUNT 8 /* hardcoded # of relay outputs */ +#define PX4IO_P_CONFIG_CONTROL_GROUP_COUNT 8 /**< hardcoded # of control groups*/ /* dynamic status page */ #define PX4IO_PAGE_STATUS 1 @@ -124,6 +128,8 @@ #define PX4IO_P_STATUS_VSERVO 6 /* [2] servo rail voltage in mV */ #define PX4IO_P_STATUS_VRSSI 7 /* [2] RSSI voltage */ #define PX4IO_P_STATUS_PRSSI 8 /* [2] RSSI PWM value */ +#define PX4IO_P_STATUS_NRSSI 9 /* [2] Normalized RSSI value, 0: no reception, 255: perfect reception */ +#define PX4IO_P_STATUS_RC_DATA 10 /* [1] + [2] Details about the RC source (PPM frame length, Spektrum protocol type) */ /* array of post-mix actuator outputs, -10000..10000 */ #define PX4IO_PAGE_ACTUATORS 2 /* 0..CONFIG_ACTUATOR_COUNT-1 */ @@ -184,44 +190,59 @@ enum { /* DSM bind states */ dsm_bind_reinit_uart }; /* 8 */ -#define PX4IO_P_SETUP_SET_DEBUG 9 /* debug level for IO board */ +#define PX4IO_P_SETUP_SET_DEBUG 9 /* debug level for IO board */ + +#define PX4IO_P_SETUP_REBOOT_BL 10 /* reboot IO into bootloader */ +#define PX4IO_REBOOT_BL_MAGIC 14662 /* required argument for reboot (random) */ + +#define PX4IO_P_SETUP_CRC 11 /* get CRC of IO firmware */ /* autopilot control values, -10000..10000 */ -#define PX4IO_PAGE_CONTROLS 51 /* 0..CONFIG_CONTROL_COUNT */ +#define PX4IO_PAGE_CONTROLS 51 /**< actuator control groups, one after the other, 8 wide */ +#define PX4IO_P_CONTROLS_GROUP_0 (PX4IO_PROTOCOL_MAX_CONTROL_COUNT * 0) /**< 0..PX4IO_PROTOCOL_MAX_CONTROL_COUNT - 1 */ +#define PX4IO_P_CONTROLS_GROUP_1 (PX4IO_PROTOCOL_MAX_CONTROL_COUNT * 1) /**< 0..PX4IO_PROTOCOL_MAX_CONTROL_COUNT - 1 */ +#define PX4IO_P_CONTROLS_GROUP_2 (PX4IO_PROTOCOL_MAX_CONTROL_COUNT * 2) /**< 0..PX4IO_PROTOCOL_MAX_CONTROL_COUNT - 1 */ +#define PX4IO_P_CONTROLS_GROUP_3 (PX4IO_PROTOCOL_MAX_CONTROL_COUNT * 3) /**< 0..PX4IO_PROTOCOL_MAX_CONTROL_COUNT - 1 */ + +#define PX4IO_P_CONTROLS_GROUP_VALID 64 +#define PX4IO_P_CONTROLS_GROUP_VALID_GROUP0 (1 << 0) /* group 0 is valid / received */ +#define PX4IO_P_CONTROLS_GROUP_VALID_GROUP1 (1 << 1) /* group 1 is valid / received */ +#define PX4IO_P_CONTROLS_GROUP_VALID_GROUP2 (1 << 2) /* group 2 is valid / received */ +#define PX4IO_P_CONTROLS_GROUP_VALID_GROUP3 (1 << 3) /* group 3 is valid / received */ /* raw text load to the mixer parser - ignores offset */ -#define PX4IO_PAGE_MIXERLOAD 52 +#define PX4IO_PAGE_MIXERLOAD 52 /* R/C channel config */ -#define PX4IO_PAGE_RC_CONFIG 53 /* R/C input configuration */ -#define PX4IO_P_RC_CONFIG_MIN 0 /* lowest input value */ -#define PX4IO_P_RC_CONFIG_CENTER 1 /* center input value */ -#define PX4IO_P_RC_CONFIG_MAX 2 /* highest input value */ -#define PX4IO_P_RC_CONFIG_DEADZONE 3 /* band around center that is ignored */ -#define PX4IO_P_RC_CONFIG_ASSIGNMENT 4 /* mapped input value */ -#define PX4IO_P_RC_CONFIG_OPTIONS 5 /* channel options bitmask */ +#define PX4IO_PAGE_RC_CONFIG 53 /**< R/C input configuration */ +#define PX4IO_P_RC_CONFIG_MIN 0 /**< lowest input value */ +#define PX4IO_P_RC_CONFIG_CENTER 1 /**< center input value */ +#define PX4IO_P_RC_CONFIG_MAX 2 /**< highest input value */ +#define PX4IO_P_RC_CONFIG_DEADZONE 3 /**< band around center that is ignored */ +#define PX4IO_P_RC_CONFIG_ASSIGNMENT 4 /**< mapped input value */ +#define PX4IO_P_RC_CONFIG_OPTIONS 5 /**< channel options bitmask */ #define PX4IO_P_RC_CONFIG_OPTIONS_ENABLED (1 << 0) #define PX4IO_P_RC_CONFIG_OPTIONS_REVERSE (1 << 1) -#define PX4IO_P_RC_CONFIG_STRIDE 6 /* spacing between channel config data */ +#define PX4IO_P_RC_CONFIG_STRIDE 6 /**< spacing between channel config data */ /* PWM output - overrides mixer */ -#define PX4IO_PAGE_DIRECT_PWM 54 /* 0..CONFIG_ACTUATOR_COUNT-1 */ +#define PX4IO_PAGE_DIRECT_PWM 54 /**< 0..CONFIG_ACTUATOR_COUNT-1 */ /* PWM failsafe values - zero disables the output */ -#define PX4IO_PAGE_FAILSAFE_PWM 55 /* 0..CONFIG_ACTUATOR_COUNT-1 */ +#define PX4IO_PAGE_FAILSAFE_PWM 55 /**< 0..CONFIG_ACTUATOR_COUNT-1 */ /* Debug and test page - not used in normal operation */ -#define PX4IO_PAGE_TEST 127 -#define PX4IO_P_TEST_LED 0 /* set the amber LED on/off */ +#define PX4IO_PAGE_TEST 127 +#define PX4IO_P_TEST_LED 0 /**< set the amber LED on/off */ /* PWM minimum values for certain ESCs */ -#define PX4IO_PAGE_CONTROL_MIN_PWM 106 /* 0..CONFIG_ACTUATOR_COUNT-1 */ +#define PX4IO_PAGE_CONTROL_MIN_PWM 106 /**< 0..CONFIG_ACTUATOR_COUNT-1 */ /* PWM maximum values for certain ESCs */ -#define PX4IO_PAGE_CONTROL_MAX_PWM 107 /* 0..CONFIG_ACTUATOR_COUNT-1 */ +#define PX4IO_PAGE_CONTROL_MAX_PWM 107 /**< 0..CONFIG_ACTUATOR_COUNT-1 */ /* PWM disarmed values that are active, even when SAFETY_SAFE */ -#define PX4IO_PAGE_DISARMED_PWM 108 /* 0..CONFIG_ACTUATOR_COUNT-1 */ +#define PX4IO_PAGE_DISARMED_PWM 108 /* 0..CONFIG_ACTUATOR_COUNT-1 */ /** * As-needed mixer data upload. diff --git a/src/modules/px4iofirmware/px4io.c b/src/modules/px4iofirmware/px4io.c index ff9eecd74..0b8c4a6a8 100644 --- a/src/modules/px4iofirmware/px4io.c +++ b/src/modules/px4iofirmware/px4io.c @@ -45,6 +45,7 @@ #include <string.h> #include <poll.h> #include <signal.h> +#include <crc32.h> #include <drivers/drv_pwm_output.h> #include <drivers/drv_hrt.h> @@ -117,6 +118,48 @@ show_debug_messages(void) } } +static void +heartbeat_blink(void) +{ + static bool heartbeat = false; + LED_BLUE(heartbeat = !heartbeat); +} + +static uint64_t reboot_time; + +/** + schedule a reboot in time_delta_usec microseconds + */ +void schedule_reboot(uint32_t time_delta_usec) +{ + reboot_time = hrt_absolute_time() + time_delta_usec; +} + +/** + check for a scheduled reboot + */ +static void check_reboot(void) +{ + if (reboot_time != 0 && hrt_absolute_time() > reboot_time) { + up_systemreset(); + } +} + +static void +calculate_fw_crc(void) +{ +#define APP_SIZE_MAX 0xf000 +#define APP_LOAD_ADDRESS 0x08001000 + // compute CRC of the current firmware + uint32_t sum = 0; + for (unsigned p = 0; p < APP_SIZE_MAX; p += 4) { + uint32_t bytes = *(uint32_t *)(p + APP_LOAD_ADDRESS); + sum = crc32part((uint8_t *)&bytes, sizeof(bytes), sum); + } + r_page_setup[PX4IO_P_SETUP_CRC] = sum & 0xFFFF; + r_page_setup[PX4IO_P_SETUP_CRC+1] = sum >> 16; +} + int user_start(int argc, char *argv[]) { @@ -129,6 +172,9 @@ user_start(int argc, char *argv[]) /* configure the high-resolution time/callout interface */ hrt_init(); + /* calculate our fw CRC so FMU can decide if we need to update */ + calculate_fw_crc(); + /* * Poll at 1ms intervals for received bytes that have not triggered * a DMA event. @@ -201,6 +247,7 @@ user_start(int argc, char *argv[]) */ uint64_t last_debug_time = 0; + uint64_t last_heartbeat_time = 0; for (;;) { /* track the rate at which the loop is running */ @@ -216,6 +263,13 @@ user_start(int argc, char *argv[]) controls_tick(); perf_end(controls_perf); + if ((hrt_absolute_time() - last_heartbeat_time) > 250*1000) { + last_heartbeat_time = hrt_absolute_time(); + heartbeat_blink(); + } + + check_reboot(); + #if 0 /* check for debug activity */ show_debug_messages(); diff --git a/src/modules/px4iofirmware/px4io.h b/src/modules/px4iofirmware/px4io.h index 4fea0288c..a0daa97ea 100644 --- a/src/modules/px4iofirmware/px4io.h +++ b/src/modules/px4iofirmware/px4io.h @@ -53,7 +53,9 @@ */ #define PX4IO_SERVO_COUNT 8 #define PX4IO_CONTROL_CHANNELS 8 -#define PX4IO_INPUT_CHANNELS 8 // XXX this should be 18 channels +#define PX4IO_CONTROL_GROUPS 2 +#define PX4IO_RC_INPUT_CHANNELS 18 +#define PX4IO_RC_MAPPED_CONTROL_CHANNELS 8 /**< This is the maximum number of channels mapped/used */ /* * Debug logging @@ -169,6 +171,8 @@ extern pwm_limit_t pwm_limit; #define BUTTON_SAFETY stm32_gpioread(GPIO_BTN_SAFETY) +#define CONTROL_PAGE_INDEX(_group, _channel) (_group * PX4IO_CONTROL_CHANNELS + _channel) + /* * Mixer */ @@ -209,10 +213,14 @@ extern int dsm_init(const char *device); extern bool dsm_input(uint16_t *values, uint16_t *num_values); extern void dsm_bind(uint16_t cmd, int pulses); extern int sbus_init(const char *device); -extern bool sbus_input(uint16_t *values, uint16_t *num_values, uint16_t max_channels); +extern bool sbus_input(uint16_t *values, uint16_t *num_values, uint16_t *rssi, uint16_t max_channels); /** global debug level for isr_debug() */ extern volatile uint8_t debug_level; /** send a debug message to the console */ extern void isr_debug(uint8_t level, const char *fmt, ...); + +/** schedule a reboot */ +extern void schedule_reboot(uint32_t time_delta_usec); + diff --git a/src/modules/px4iofirmware/registers.c b/src/modules/px4iofirmware/registers.c index 86a40bc22..ad4473073 100644 --- a/src/modules/px4iofirmware/registers.c +++ b/src/modules/px4iofirmware/registers.c @@ -1,6 +1,6 @@ /**************************************************************************** * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. + * Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -45,6 +45,8 @@ #include <drivers/drv_hrt.h> #include <drivers/drv_pwm_output.h> +#include <systemlib/systemlib.h> +#include <stm32_pwr.h> #include "px4io.h" #include "protocol.h" @@ -68,7 +70,7 @@ static const uint16_t r_page_config[] = { [PX4IO_P_CONFIG_MAX_TRANSFER] = 64, /* XXX hardcoded magic number */ [PX4IO_P_CONFIG_CONTROL_COUNT] = PX4IO_CONTROL_CHANNELS, [PX4IO_P_CONFIG_ACTUATOR_COUNT] = PX4IO_SERVO_COUNT, - [PX4IO_P_CONFIG_RC_INPUT_COUNT] = PX4IO_CONTROL_CHANNELS, + [PX4IO_P_CONFIG_RC_INPUT_COUNT] = PX4IO_RC_INPUT_CHANNELS, [PX4IO_P_CONFIG_ADC_INPUT_COUNT] = PX4IO_ADC_CHANNEL_COUNT, [PX4IO_P_CONFIG_RELAY_COUNT] = PX4IO_RELAY_CHANNELS, }; @@ -87,7 +89,9 @@ uint16_t r_page_status[] = { [PX4IO_P_STATUS_IBATT] = 0, [PX4IO_P_STATUS_VSERVO] = 0, [PX4IO_P_STATUS_VRSSI] = 0, - [PX4IO_P_STATUS_PRSSI] = 0 + [PX4IO_P_STATUS_PRSSI] = 0, + [PX4IO_P_STATUS_NRSSI] = 0, + [PX4IO_P_STATUS_RC_DATA] = 0 }; /** @@ -112,7 +116,7 @@ uint16_t r_page_servos[PX4IO_SERVO_COUNT]; uint16_t r_page_raw_rc_input[] = { [PX4IO_P_RAW_RC_COUNT] = 0, - [PX4IO_P_RAW_RC_BASE ... (PX4IO_P_RAW_RC_BASE + PX4IO_CONTROL_CHANNELS)] = 0 + [PX4IO_P_RAW_RC_BASE ... (PX4IO_P_RAW_RC_BASE + PX4IO_RC_INPUT_CHANNELS)] = 0 }; /** @@ -122,7 +126,7 @@ uint16_t r_page_raw_rc_input[] = */ uint16_t r_page_rc_input[] = { [PX4IO_P_RC_VALID] = 0, - [PX4IO_P_RC_BASE ... (PX4IO_P_RC_BASE + PX4IO_CONTROL_CHANNELS)] = 0 + [PX4IO_P_RC_BASE ... (PX4IO_P_RC_BASE + PX4IO_RC_MAPPED_CONTROL_CHANNELS)] = 0 }; /** @@ -154,6 +158,8 @@ volatile uint16_t r_page_setup[] = [PX4IO_P_SETUP_VBATT_SCALE] = 10000, #endif [PX4IO_P_SETUP_SET_DEBUG] = 0, + [PX4IO_P_SETUP_REBOOT_BL] = 0, + [PX4IO_P_SETUP_CRC ... (PX4IO_P_SETUP_CRC+1)] = 0, }; #define PX4IO_P_SETUP_FEATURES_VALID (0) @@ -172,7 +178,7 @@ volatile uint16_t r_page_setup[] = * * Control values from the FMU. */ -volatile uint16_t r_page_controls[PX4IO_CONTROL_CHANNELS]; +volatile uint16_t r_page_controls[PX4IO_CONTROL_GROUPS * PX4IO_CONTROL_CHANNELS]; /* * PAGE 102 does not have a buffer. @@ -183,7 +189,7 @@ volatile uint16_t r_page_controls[PX4IO_CONTROL_CHANNELS]; * * R/C channel input configuration. */ -uint16_t r_page_rc_input_config[PX4IO_CONTROL_CHANNELS * PX4IO_P_RC_CONFIG_STRIDE]; +uint16_t r_page_rc_input_config[PX4IO_RC_INPUT_CHANNELS * PX4IO_P_RC_CONFIG_STRIDE]; /* valid options */ #define PX4IO_P_RC_CONFIG_OPTIONS_VALID (PX4IO_P_RC_CONFIG_OPTIONS_REVERSE | PX4IO_P_RC_CONFIG_OPTIONS_ENABLED) @@ -235,7 +241,7 @@ registers_set(uint8_t page, uint8_t offset, const uint16_t *values, unsigned num case PX4IO_PAGE_CONTROLS: /* copy channel data */ - while ((offset < PX4IO_CONTROL_CHANNELS) && (num_values > 0)) { + while ((offset < PX4IO_CONTROL_GROUPS * PX4IO_CONTROL_CHANNELS) && (num_values > 0)) { /* XXX range-check value? */ r_page_controls[offset] = *values; @@ -501,6 +507,24 @@ registers_set_one(uint8_t page, uint8_t offset, uint16_t value) isr_debug(0, "set debug %u\n", (unsigned)r_page_setup[PX4IO_P_SETUP_SET_DEBUG]); break; + case PX4IO_P_SETUP_REBOOT_BL: + if ((r_status_flags & PX4IO_P_STATUS_FLAGS_SAFETY_OFF) || + (r_status_flags & PX4IO_P_STATUS_FLAGS_OVERRIDE) || + (r_setup_arming & PX4IO_P_SETUP_ARMING_FMU_ARMED)) { + // don't allow reboot while armed + break; + } + + // check the magic value + if (value != PX4IO_REBOOT_BL_MAGIC) + break; + + // we schedule a reboot rather than rebooting + // immediately to allow the IO board to ACK + // the reboot command + schedule_reboot(100000); + break; + case PX4IO_P_SETUP_DSM: dsm_bind(value & 0x0f, (value >> 4) & 7); break; @@ -525,7 +549,7 @@ registers_set_one(uint8_t page, uint8_t offset, uint16_t value) unsigned index = offset - channel * PX4IO_P_RC_CONFIG_STRIDE; uint16_t *conf = &r_page_rc_input_config[channel * PX4IO_P_RC_CONFIG_STRIDE]; - if (channel >= PX4IO_CONTROL_CHANNELS) + if (channel >= PX4IO_RC_INPUT_CHANNELS) return -1; /* disable the channel until we have a chance to sanity-check it */ @@ -555,6 +579,7 @@ registers_set_one(uint8_t page, uint8_t offset, uint16_t value) /* this option is normally set last */ if (value & PX4IO_P_RC_CONFIG_OPTIONS_ENABLED) { uint8_t count = 0; + bool disabled = false; /* assert min..center..max ordering */ if (conf[PX4IO_P_RC_CONFIG_MIN] < 500) { @@ -573,7 +598,10 @@ registers_set_one(uint8_t page, uint8_t offset, uint16_t value) if (conf[PX4IO_P_RC_CONFIG_DEADZONE] > 500) { count++; } - if (conf[PX4IO_P_RC_CONFIG_ASSIGNMENT] >= PX4IO_CONTROL_CHANNELS) { + + if (conf[PX4IO_P_RC_CONFIG_ASSIGNMENT] == UINT8_MAX) { + disabled = true; + } else if ((int)(conf[PX4IO_P_RC_CONFIG_ASSIGNMENT]) < 0 || conf[PX4IO_P_RC_CONFIG_ASSIGNMENT] >= PX4IO_RC_MAPPED_CONTROL_CHANNELS) { count++; } @@ -581,7 +609,7 @@ registers_set_one(uint8_t page, uint8_t offset, uint16_t value) if (count) { isr_debug(0, "ERROR: %d config error(s) for RC%d.\n", count, (channel + 1)); r_status_flags &= ~PX4IO_P_STATUS_FLAGS_INIT_OK; - } else { + } else if (!disabled) { conf[index] |= PX4IO_P_RC_CONFIG_OPTIONS_ENABLED; } } diff --git a/src/modules/px4iofirmware/safety.c b/src/modules/px4iofirmware/safety.c index 95335f038..cdb54a80a 100644 --- a/src/modules/px4iofirmware/safety.c +++ b/src/modules/px4iofirmware/safety.c @@ -77,7 +77,6 @@ static unsigned blink_counter = 0; static bool safety_button_pressed; static void safety_check_button(void *arg); -static void heartbeat_blink(void *arg); static void failsafe_blink(void *arg); void @@ -86,9 +85,6 @@ safety_init(void) /* arrange for the button handler to be called at 10Hz */ hrt_call_every(&arming_call, 1000, 100000, safety_check_button, NULL); - /* arrange for the heartbeat handler to be called at 4Hz */ - hrt_call_every(&heartbeat_call, 1000, 250000, heartbeat_blink, NULL); - /* arrange for the failsafe blinker to be called at 8Hz */ hrt_call_every(&failsafe_call, 1000, 125000, failsafe_blink, NULL); } @@ -164,16 +160,6 @@ safety_check_button(void *arg) } static void -heartbeat_blink(void *arg) -{ - static bool heartbeat = false; - - /* XXX add flags here that need to be frobbed by various loops */ - - LED_BLUE(heartbeat = !heartbeat); -} - -static void failsafe_blink(void *arg) { /* indicate that a serious initialisation error occured */ @@ -192,4 +178,4 @@ failsafe_blink(void *arg) } LED_AMBER(failsafe); -}
\ No newline at end of file +} diff --git a/src/modules/px4iofirmware/sbus.c b/src/modules/px4iofirmware/sbus.c index c523df6ca..11ccd7356 100644 --- a/src/modules/px4iofirmware/sbus.c +++ b/src/modules/px4iofirmware/sbus.c @@ -54,6 +54,27 @@ #define SBUS_FRAME_SIZE 25 #define SBUS_INPUT_CHANNELS 16 +#define SBUS_FLAGS_BYTE 23 +#define SBUS_FAILSAFE_BIT 3 +#define SBUS_FRAMELOST_BIT 2 + +/* + Measured values with Futaba FX-30/R6108SB: + -+100% on TX: PCM 1.100/1.520/1.950ms -> SBus raw values: 350/1024/1700 (100% ATV) + -+140% on TX: PCM 0.930/1.520/2.112ms -> SBus raw values: 78/1024/1964 (140% ATV) + -+152% on TX: PCM 0.884/1.520/2.160ms -> SBus raw values: 1/1024/2047 (140% ATV plus dirty tricks) +*/ + +/* define range mapping here, -+100% -> 1000..2000 */ +#define SBUS_RANGE_MIN 200.0f +#define SBUS_RANGE_MAX 1800.0f + +#define SBUS_TARGET_MIN 1000.0f +#define SBUS_TARGET_MAX 2000.0f + +/* pre-calculate the floating point stuff as far as possible at compile time */ +#define SBUS_SCALE_FACTOR ((SBUS_TARGET_MAX - SBUS_TARGET_MIN) / (SBUS_RANGE_MAX - SBUS_RANGE_MIN)) +#define SBUS_SCALE_OFFSET (int)(SBUS_TARGET_MIN - (SBUS_SCALE_FACTOR * SBUS_RANGE_MIN + 0.5f)) static int sbus_fd = -1; @@ -66,7 +87,7 @@ static unsigned partial_frame_count; unsigned sbus_frame_drops; -static bool sbus_decode(hrt_abstime frame_time, uint16_t *values, uint16_t *num_values, uint16_t max_channels); +static bool sbus_decode(hrt_abstime frame_time, uint16_t *values, uint16_t *num_values, uint16_t *rssi, uint16_t max_channels); int sbus_init(const char *device) @@ -97,7 +118,7 @@ sbus_init(const char *device) } bool -sbus_input(uint16_t *values, uint16_t *num_values, uint16_t max_channels) +sbus_input(uint16_t *values, uint16_t *num_values, uint16_t *rssi, uint16_t max_channels) { ssize_t ret; hrt_abstime now; @@ -154,7 +175,7 @@ sbus_input(uint16_t *values, uint16_t *num_values, uint16_t max_channels) * decode it. */ partial_frame_count = 0; - return sbus_decode(now, values, num_values, max_channels); + return sbus_decode(now, values, num_values, rssi, max_channels); } /* @@ -194,7 +215,7 @@ static const struct sbus_bit_pick sbus_decoder[SBUS_INPUT_CHANNELS][3] = { }; static bool -sbus_decode(hrt_abstime frame_time, uint16_t *values, uint16_t *num_values, uint16_t max_values) +sbus_decode(hrt_abstime frame_time, uint16_t *values, uint16_t *num_values, uint16_t *rssi, uint16_t max_values) { /* check frame boundary markers to avoid out-of-sync cases */ if ((frame[0] != 0x0f) || (frame[24] != 0x00)) { @@ -202,15 +223,6 @@ sbus_decode(hrt_abstime frame_time, uint16_t *values, uint16_t *num_values, uint return false; } - /* if the failsafe or connection lost bit is set, we consider the frame invalid */ - if ((frame[23] & (1 << 2)) && /* signal lost */ - (frame[23] & (1 << 3))) { /* failsafe */ - - /* actively announce signal loss */ - *values = 0; - return false; - } - /* we have received something we think is a frame */ last_frame_time = frame_time; @@ -234,22 +246,41 @@ sbus_decode(hrt_abstime frame_time, uint16_t *values, uint16_t *num_values, uint } } - /* convert 0-2048 values to 1000-2000 ppm encoding in a very sloppy fashion */ - values[channel] = (value / 2) + 998; + + /* convert 0-2048 values to 1000-2000 ppm encoding in a not too sloppy fashion */ + values[channel] = (uint16_t)(value * SBUS_SCALE_FACTOR +.5f) + SBUS_SCALE_OFFSET; } /* decode switch channels if data fields are wide enough */ - if (PX4IO_INPUT_CHANNELS > 17 && chancount > 15) { + if (PX4IO_RC_INPUT_CHANNELS > 17 && chancount > 15) { chancount = 18; /* channel 17 (index 16) */ - values[16] = (frame[23] & (1 << 0)) * 1000 + 998; + values[16] = (frame[SBUS_FLAGS_BYTE] & (1 << 0)) * 1000 + 998; /* channel 18 (index 17) */ - values[17] = (frame[23] & (1 << 1)) * 1000 + 998; + values[17] = (frame[SBUS_FLAGS_BYTE] & (1 << 1)) * 1000 + 998; } /* note the number of channels decoded */ *num_values = chancount; + /* decode and handle failsafe and frame-lost flags */ + if (frame[SBUS_FLAGS_BYTE] & (1 << SBUS_FAILSAFE_BIT)) { /* failsafe */ + /* report that we failed to read anything valid off the receiver */ + *rssi = 0; + return false; + } + else if (frame[SBUS_FLAGS_BYTE] & (1 << SBUS_FRAMELOST_BIT)) { /* a frame was lost */ + /* set a special warning flag or try to calculate some kind of RSSI information - to be implemented + * + * Attention! This flag indicates a skipped frame only, not a total link loss! Handling this + * condition as fail-safe greatly reduces the reliability and range of the radio link, + * e.g. by prematurely issueing return-to-launch!!! */ + + *rssi = 100; // XXX magic number indicating bad signal, but not a signal loss (yet) + } + + *rssi = 255; + return true; } diff --git a/src/modules/sdlog2/sdlog2.c b/src/modules/sdlog2/sdlog2.c index 72cfb4d0d..06b1eddaa 100644 --- a/src/modules/sdlog2/sdlog2.c +++ b/src/modules/sdlog2/sdlog2.c @@ -1,6 +1,6 @@ /**************************************************************************** * - * Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved. + * Copyright (c) 2012-2014 PX4 Development Team. All rights reserved. * Author: Lorenz Meier <lm@inf.ethz.ch> * Anton Babushkin <anton.babushkin@me.com> * @@ -68,7 +68,6 @@ #include <uORB/topics/vehicle_rates_setpoint.h> #include <uORB/topics/actuator_outputs.h> #include <uORB/topics/actuator_controls.h> -#include <uORB/topics/actuator_controls_effective.h> #include <uORB/topics/vehicle_command.h> #include <uORB/topics/vehicle_local_position.h> #include <uORB/topics/vehicle_local_position_setpoint.h> @@ -691,7 +690,6 @@ int sdlog2_thread_main(int argc, char *argv[]) struct vehicle_rates_setpoint_s rates_sp; struct actuator_outputs_s act_outputs; struct actuator_controls_s act_controls; - struct actuator_controls_effective_s act_controls_effective; struct vehicle_local_position_s local_pos; struct vehicle_local_position_setpoint_s local_pos_sp; struct vehicle_global_position_s global_pos; @@ -718,7 +716,6 @@ int sdlog2_thread_main(int argc, char *argv[]) int rates_sp_sub; int act_outputs_sub; int act_controls_sub; - int act_controls_effective_sub; int local_pos_sub; int local_pos_sp_sub; int global_pos_sub; @@ -767,7 +764,7 @@ int sdlog2_thread_main(int argc, char *argv[]) /* --- IMPORTANT: DEFINE NUMBER OF ORB STRUCTS TO WAIT FOR HERE --- */ /* number of messages */ - const ssize_t fdsc = 21; + const ssize_t fdsc = 25; /* Sanity check variable and index */ ssize_t fdsc_count = 0; /* file descriptors to wait for */ @@ -827,12 +824,6 @@ int sdlog2_thread_main(int argc, char *argv[]) fds[fdsc_count].events = POLLIN; fdsc_count++; - /* --- ACTUATOR CONTROL EFFECTIVE --- */ - subs.act_controls_effective_sub = orb_subscribe(ORB_ID_VEHICLE_ATTITUDE_CONTROLS_EFFECTIVE); - fds[fdsc_count].fd = subs.act_controls_effective_sub; - fds[fdsc_count].events = POLLIN; - fdsc_count++; - /* --- LOCAL POSITION --- */ subs.local_pos_sub = orb_subscribe(ORB_ID(vehicle_local_position)); fds[fdsc_count].fd = subs.local_pos_sub; @@ -1121,12 +1112,6 @@ int sdlog2_thread_main(int argc, char *argv[]) LOGBUFFER_WRITE_AND_COUNT(ATTC); } - /* --- ACTUATOR CONTROL EFFECTIVE --- */ - if (fds[ifds++].revents & POLLIN) { - orb_copy(ORB_ID_VEHICLE_ATTITUDE_CONTROLS_EFFECTIVE, subs.act_controls_effective_sub, &buf.act_controls_effective); - // TODO not implemented yet - } - /* --- LOCAL POSITION --- */ if (fds[ifds++].revents & POLLIN) { orb_copy(ORB_ID(vehicle_local_position), subs.local_pos_sub, &buf.local_pos); @@ -1215,6 +1200,7 @@ int sdlog2_thread_main(int argc, char *argv[]) log_msg.msg_type = LOG_RC_MSG; /* Copy only the first 8 channels of 14 */ memcpy(log_msg.body.log_RC.channel, buf.rc.chan, sizeof(log_msg.body.log_RC.channel)); + log_msg.body.log_RC.channel_count = buf.rc.chan_count; LOGBUFFER_WRITE_AND_COUNT(RC); } diff --git a/src/modules/sdlog2/sdlog2_messages.h b/src/modules/sdlog2/sdlog2_messages.h index b02f39858..a784a1f30 100644 --- a/src/modules/sdlog2/sdlog2_messages.h +++ b/src/modules/sdlog2/sdlog2_messages.h @@ -157,6 +157,7 @@ struct log_STAT_s { #define LOG_RC_MSG 11 struct log_RC_s { float channel[8]; + uint8_t channel_count; }; /* --- OUT0 - ACTUATOR_0 OUTPUT --- */ @@ -288,7 +289,7 @@ static const struct log_format_s log_formats[] = { LOG_FORMAT(GPS, "QBffLLfffff", "GPSTime,FixType,EPH,EPV,Lat,Lon,Alt,VelN,VelE,VelD,Cog"), LOG_FORMAT(ATTC, "ffff", "Roll,Pitch,Yaw,Thrust"), LOG_FORMAT(STAT, "BBBfBB", "MainState,NavState,ArmState,BatRem,BatWarn,Landed"), - LOG_FORMAT(RC, "ffffffff", "Ch0,Ch1,Ch2,Ch3,Ch4,Ch5,Ch6,Ch7"), + LOG_FORMAT(RC, "ffffffffB", "Ch0,Ch1,Ch2,Ch3,Ch4,Ch5,Ch6,Ch7,Count"), LOG_FORMAT(OUT0, "ffffffff", "Out0,Out1,Out2,Out3,Out4,Out5,Out6,Out7"), LOG_FORMAT(AIRS, "ff", "IndSpeed,TrueSpeed"), LOG_FORMAT(ARSP, "fff", "RollRateSP,PitchRateSP,YawRateSP"), diff --git a/src/modules/sensors/sensor_params.c b/src/modules/sensors/sensor_params.c index 09ddbf503..241c5b99b 100644 --- a/src/modules/sensors/sensor_params.c +++ b/src/modules/sensors/sensor_params.c @@ -104,49 +104,49 @@ PARAM_DEFINE_FLOAT(RC1_MIN, 1000.0f); PARAM_DEFINE_FLOAT(RC1_TRIM, 1500.0f); PARAM_DEFINE_FLOAT(RC1_MAX, 2000.0f); PARAM_DEFINE_FLOAT(RC1_REV, 1.0f); -PARAM_DEFINE_FLOAT(RC1_DZ, 0.0f); +PARAM_DEFINE_FLOAT(RC1_DZ, 10.0f); PARAM_DEFINE_FLOAT(RC2_MIN, 1000); PARAM_DEFINE_FLOAT(RC2_TRIM, 1500); PARAM_DEFINE_FLOAT(RC2_MAX, 2000); PARAM_DEFINE_FLOAT(RC2_REV, 1.0f); -PARAM_DEFINE_FLOAT(RC2_DZ, 0.0f); +PARAM_DEFINE_FLOAT(RC2_DZ, 10.0f); PARAM_DEFINE_FLOAT(RC3_MIN, 1000); PARAM_DEFINE_FLOAT(RC3_TRIM, 1500); PARAM_DEFINE_FLOAT(RC3_MAX, 2000); PARAM_DEFINE_FLOAT(RC3_REV, 1.0f); -PARAM_DEFINE_FLOAT(RC3_DZ, 0.0f); +PARAM_DEFINE_FLOAT(RC3_DZ, 10.0f); PARAM_DEFINE_FLOAT(RC4_MIN, 1000); PARAM_DEFINE_FLOAT(RC4_TRIM, 1500); PARAM_DEFINE_FLOAT(RC4_MAX, 2000); PARAM_DEFINE_FLOAT(RC4_REV, 1.0f); -PARAM_DEFINE_FLOAT(RC4_DZ, 30.0f); +PARAM_DEFINE_FLOAT(RC4_DZ, 10.0f); PARAM_DEFINE_FLOAT(RC5_MIN, 1000); PARAM_DEFINE_FLOAT(RC5_TRIM, 1500); PARAM_DEFINE_FLOAT(RC5_MAX, 2000); PARAM_DEFINE_FLOAT(RC5_REV, 1.0f); -PARAM_DEFINE_FLOAT(RC5_DZ, 0.0f); +PARAM_DEFINE_FLOAT(RC5_DZ, 10.0f); PARAM_DEFINE_FLOAT(RC6_MIN, 1000); PARAM_DEFINE_FLOAT(RC6_TRIM, 1500); PARAM_DEFINE_FLOAT(RC6_MAX, 2000); PARAM_DEFINE_FLOAT(RC6_REV, 1.0f); -PARAM_DEFINE_FLOAT(RC6_DZ, 0.0f); +PARAM_DEFINE_FLOAT(RC6_DZ, 10.0f); PARAM_DEFINE_FLOAT(RC7_MIN, 1000); PARAM_DEFINE_FLOAT(RC7_TRIM, 1500); PARAM_DEFINE_FLOAT(RC7_MAX, 2000); PARAM_DEFINE_FLOAT(RC7_REV, 1.0f); -PARAM_DEFINE_FLOAT(RC7_DZ, 0.0f); +PARAM_DEFINE_FLOAT(RC7_DZ, 10.0f); PARAM_DEFINE_FLOAT(RC8_MIN, 1000); PARAM_DEFINE_FLOAT(RC8_TRIM, 1500); PARAM_DEFINE_FLOAT(RC8_MAX, 2000); PARAM_DEFINE_FLOAT(RC8_REV, 1.0f); -PARAM_DEFINE_FLOAT(RC8_DZ, 0.0f); +PARAM_DEFINE_FLOAT(RC8_DZ, 10.0f); PARAM_DEFINE_FLOAT(RC9_MIN, 1000); PARAM_DEFINE_FLOAT(RC9_TRIM, 1500); @@ -190,11 +190,30 @@ PARAM_DEFINE_FLOAT(RC15_MAX, 2000); PARAM_DEFINE_FLOAT(RC15_REV, 1.0f); PARAM_DEFINE_FLOAT(RC15_DZ, 0.0f); +PARAM_DEFINE_FLOAT(RC16_MIN, 1000); +PARAM_DEFINE_FLOAT(RC16_TRIM, 1500); +PARAM_DEFINE_FLOAT(RC16_MAX, 2000); +PARAM_DEFINE_FLOAT(RC16_REV, 1.0f); +PARAM_DEFINE_FLOAT(RC16_DZ, 0.0f); + +PARAM_DEFINE_FLOAT(RC17_MIN, 1000); +PARAM_DEFINE_FLOAT(RC17_TRIM, 1500); +PARAM_DEFINE_FLOAT(RC17_MAX, 2000); +PARAM_DEFINE_FLOAT(RC17_REV, 1.0f); +PARAM_DEFINE_FLOAT(RC17_DZ, 0.0f); + +PARAM_DEFINE_FLOAT(RC18_MIN, 1000); +PARAM_DEFINE_FLOAT(RC18_TRIM, 1500); +PARAM_DEFINE_FLOAT(RC18_MAX, 2000); +PARAM_DEFINE_FLOAT(RC18_REV, 1.0f); +PARAM_DEFINE_FLOAT(RC18_DZ, 0.0f); + #ifdef CONFIG_ARCH_BOARD_PX4FMU_V1 PARAM_DEFINE_INT32(RC_RL1_DSM_VCC, 0); /* Relay 1 controls DSM VCC */ #endif PARAM_DEFINE_INT32(RC_DSM_BIND, -1); /* -1 = Idle, 0 = Start DSM2 bind, 1 = Start DSMX bind */ +PARAM_DEFINE_INT32(BAT_V_SCALE_IO, 10000); #ifdef CONFIG_ARCH_BOARD_PX4FMU_V2 PARAM_DEFINE_FLOAT(BAT_V_SCALING, 0.0082f); PARAM_DEFINE_FLOAT(BAT_C_SCALING, 0.001f); // TODO set correct default value @@ -228,3 +247,7 @@ PARAM_DEFINE_INT32(RC_MAP_AUX3, 0); /**< default function: camera azimuth / yaw PARAM_DEFINE_FLOAT(RC_SCALE_ROLL, 0.6f); PARAM_DEFINE_FLOAT(RC_SCALE_PITCH, 0.6f); PARAM_DEFINE_FLOAT(RC_SCALE_YAW, 2.0f); + +PARAM_DEFINE_INT32(RC_FS_CH, 0); /**< RC failsafe channel, 0 = disable */ +PARAM_DEFINE_INT32(RC_FS_MODE, 0); /**< RC failsafe mode: 0 = too low means signal loss, 1 = too high means signal loss */ +PARAM_DEFINE_FLOAT(RC_FS_THR, 800); /**< RC failsafe PWM threshold */ diff --git a/src/modules/sensors/sensors.cpp b/src/modules/sensors/sensors.cpp index f205ff8f5..ff6c5882e 100644 --- a/src/modules/sensors/sensors.cpp +++ b/src/modules/sensors/sensors.cpp @@ -164,7 +164,7 @@ public: int start(); private: - static const unsigned _rc_max_chan_count = RC_CHANNELS_MAX; /**< maximum number of r/c channels we handle */ + static const unsigned _rc_max_chan_count = RC_INPUT_MAX_CHANNELS; /**< maximum number of r/c channels we handle */ hrt_abstime _rc_last_valid; /**< last time we got a valid RC signal */ @@ -262,6 +262,10 @@ private: float rc_scale_yaw; float rc_scale_flaps; + int rc_fs_ch; + int rc_fs_mode; + float rc_fs_thr; + float battery_voltage_scaling; float battery_current_scaling; @@ -308,6 +312,10 @@ private: param_t rc_scale_yaw; param_t rc_scale_flaps; + param_t rc_fs_ch; + param_t rc_fs_mode; + param_t rc_fs_thr; + param_t battery_voltage_scaling; param_t battery_current_scaling; @@ -523,6 +531,11 @@ Sensors::Sensors() : _parameter_handles.rc_scale_yaw = param_find("RC_SCALE_YAW"); _parameter_handles.rc_scale_flaps = param_find("RC_SCALE_FLAPS"); + /* RC failsafe */ + _parameter_handles.rc_fs_ch = param_find("RC_FS_CH"); + _parameter_handles.rc_fs_mode = param_find("RC_FS_MODE"); + _parameter_handles.rc_fs_thr = param_find("RC_FS_THR"); + /* gyro offsets */ _parameter_handles.gyro_offset[0] = param_find("SENS_GYRO_XOFF"); _parameter_handles.gyro_offset[1] = param_find("SENS_GYRO_YOFF"); @@ -596,7 +609,7 @@ Sensors::parameters_update() float tmpRevFactor = 0.0f; /* rc values */ - for (unsigned int i = 0; i < RC_CHANNELS_MAX; i++) { + for (unsigned int i = 0; i < _rc_max_chan_count; i++) { param_get(_parameter_handles.min[i], &(_parameters.min[i])); param_get(_parameter_handles.trim[i], &(_parameters.trim[i])); @@ -675,6 +688,9 @@ Sensors::parameters_update() param_get(_parameter_handles.rc_scale_pitch, &(_parameters.rc_scale_pitch)); param_get(_parameter_handles.rc_scale_yaw, &(_parameters.rc_scale_yaw)); param_get(_parameter_handles.rc_scale_flaps, &(_parameters.rc_scale_flaps)); + param_get(_parameter_handles.rc_fs_ch, &(_parameters.rc_fs_ch)); + param_get(_parameter_handles.rc_fs_mode, &(_parameters.rc_fs_mode)); + param_get(_parameter_handles.rc_fs_thr, &(_parameters.rc_fs_thr)); /* update RC function mappings */ _rc.function[THROTTLE] = _parameters.rc_map_throttle - 1; @@ -1288,6 +1304,18 @@ Sensors::rc_poll() if (rc_input.channel_count < 4) return; + /* failsafe check */ + if (_parameters.rc_fs_ch != 0) { + if (_parameters.rc_fs_mode == 0) { + if (rc_input.values[_parameters.rc_fs_ch - 1] < _parameters.rc_fs_thr) + return; + + } else if (_parameters.rc_fs_mode == 1) { + if (rc_input.values[_parameters.rc_fs_ch - 1] > _parameters.rc_fs_thr) + return; + } + } + unsigned channel_limit = rc_input.channel_count; if (channel_limit > _rc_max_chan_count) diff --git a/src/modules/systemlib/perf_counter.c b/src/modules/systemlib/perf_counter.c index bf84b7945..b4ca0ed3e 100644 --- a/src/modules/systemlib/perf_counter.c +++ b/src/modules/systemlib/perf_counter.c @@ -295,10 +295,11 @@ perf_print_counter(perf_counter_t handle) case PC_ELAPSED: { struct perf_ctr_elapsed *pce = (struct perf_ctr_elapsed *)handle; - printf("%s: %llu events, %lluus elapsed, min %lluus max %lluus\n", + printf("%s: %llu events, %lluus elapsed, %llu avg, min %lluus max %lluus\n", handle->name, pce->event_count, pce->time_total, + pce->time_total / pce->event_count, pce->time_least, pce->time_most); break; diff --git a/src/modules/systemlib/ppm_decode.h b/src/modules/systemlib/ppm_decode.h index 6c5e15345..5a1ad84da 100644 --- a/src/modules/systemlib/ppm_decode.h +++ b/src/modules/systemlib/ppm_decode.h @@ -57,6 +57,7 @@ __BEGIN_DECLS * PPM decoder state */ __EXPORT extern uint16_t ppm_buffer[PPM_MAX_CHANNELS]; /**< decoded PPM channel values */ +__EXPORT extern uint16_t ppm_frame_length; /**< length of the decoded PPM frame (includes gap) */ __EXPORT extern unsigned ppm_decoded_channels; /**< count of decoded channels */ __EXPORT extern hrt_abstime ppm_last_valid_decode; /**< timestamp of the last valid decode */ diff --git a/src/modules/systemlib/rc_check.c b/src/modules/systemlib/rc_check.c index b4350cc24..21e15ec56 100644 --- a/src/modules/systemlib/rc_check.c +++ b/src/modules/systemlib/rc_check.c @@ -45,7 +45,7 @@ #include <systemlib/rc_check.h> #include <systemlib/param/param.h> #include <mavlink/mavlink_log.h> -#include <uORB/topics/rc_channels.h> +#include <drivers/drv_rc_input.h> int rc_calibration_check(int mavlink_fd) { @@ -66,7 +66,7 @@ int rc_calibration_check(int mavlink_fd) { int channel_fail_count = 0; - for (int i = 0; i < RC_CHANNELS_MAX; i++) { + for (int i = 0; i < RC_INPUT_MAX_CHANNELS; i++) { /* should the channel be enabled? */ uint8_t count = 0; diff --git a/src/modules/uORB/objects_common.cpp b/src/modules/uORB/objects_common.cpp index 3514dca24..c6a252b55 100644 --- a/src/modules/uORB/objects_common.cpp +++ b/src/modules/uORB/objects_common.cpp @@ -169,13 +169,6 @@ ORB_DEFINE(actuator_controls_3, struct actuator_controls_s); #include "topics/actuator_armed.h" ORB_DEFINE(actuator_armed, struct actuator_armed_s); -/* actuator controls, as set by actuators / mixers after limiting */ -#include "topics/actuator_controls_effective.h" -ORB_DEFINE(actuator_controls_effective_0, struct actuator_controls_effective_s); -ORB_DEFINE(actuator_controls_effective_1, struct actuator_controls_effective_s); -ORB_DEFINE(actuator_controls_effective_2, struct actuator_controls_effective_s); -ORB_DEFINE(actuator_controls_effective_3, struct actuator_controls_effective_s); - #include "topics/actuator_outputs.h" ORB_DEFINE(actuator_outputs_0, struct actuator_outputs_s); ORB_DEFINE(actuator_outputs_1, struct actuator_outputs_s); diff --git a/src/modules/uORB/topics/actuator_controls_effective.h b/src/modules/uORB/topics/actuator_controls_effective.h index d7b404ad4..54d84231f 100644 --- a/src/modules/uORB/topics/actuator_controls_effective.h +++ b/src/modules/uORB/topics/actuator_controls_effective.h @@ -46,34 +46,34 @@ #ifndef TOPIC_ACTUATOR_CONTROLS_EFFECTIVE_H #define TOPIC_ACTUATOR_CONTROLS_EFFECTIVE_H -#include <stdint.h> -#include "../uORB.h" -#include "actuator_controls.h" +//#include <stdint.h> +//#include "../uORB.h" +//#include "actuator_controls.h" +// +//#define NUM_ACTUATOR_CONTROLS_EFFECTIVE NUM_ACTUATOR_CONTROLS +//#define NUM_ACTUATOR_CONTROL_GROUPS_EFFECTIVE NUM_ACTUATOR_CONTROL_GROUPS /**< for sanity checking */ +// +///** +// * @addtogroup topics +// * @{ +// */ +// +//struct actuator_controls_effective_s { +// uint64_t timestamp; +// float control_effective[NUM_ACTUATOR_CONTROLS_EFFECTIVE]; +//}; +// +///** +// * @} +// */ +// +///* actuator control sets; this list can be expanded as more controllers emerge */ +//ORB_DECLARE(actuator_controls_effective_0); +//ORB_DECLARE(actuator_controls_effective_1); +//ORB_DECLARE(actuator_controls_effective_2); +//ORB_DECLARE(actuator_controls_effective_3); +// +///* control sets with pre-defined applications */ +//#define ORB_ID_VEHICLE_ATTITUDE_CONTROLS_EFFECTIVE ORB_ID(actuator_controls_effective_0) -#define NUM_ACTUATOR_CONTROLS_EFFECTIVE NUM_ACTUATOR_CONTROLS -#define NUM_ACTUATOR_CONTROL_GROUPS_EFFECTIVE NUM_ACTUATOR_CONTROL_GROUPS /**< for sanity checking */ - -/** - * @addtogroup topics - * @{ - */ - -struct actuator_controls_effective_s { - uint64_t timestamp; - float control_effective[NUM_ACTUATOR_CONTROLS_EFFECTIVE]; -}; - -/** - * @} - */ - -/* actuator control sets; this list can be expanded as more controllers emerge */ -ORB_DECLARE(actuator_controls_effective_0); -ORB_DECLARE(actuator_controls_effective_1); -ORB_DECLARE(actuator_controls_effective_2); -ORB_DECLARE(actuator_controls_effective_3); - -/* control sets with pre-defined applications */ -#define ORB_ID_VEHICLE_ATTITUDE_CONTROLS_EFFECTIVE ORB_ID(actuator_controls_effective_0) - -#endif /* TOPIC_ACTUATOR_CONTROLS_EFFECTIVE_H */
\ No newline at end of file +#endif /* TOPIC_ACTUATOR_CONTROLS_EFFECTIVE_H */ diff --git a/src/modules/uORB/topics/rc_channels.h b/src/modules/uORB/topics/rc_channels.h index 5a8580143..086b2ef15 100644 --- a/src/modules/uORB/topics/rc_channels.h +++ b/src/modules/uORB/topics/rc_channels.h @@ -1,9 +1,6 @@ /**************************************************************************** * - * Copyright (C) 2008-2012 PX4 Development Team. All rights reserved. - * Author: @author Nils Wenzler <wenzlern@student.ethz.ch> - * @author Ivan Ovinnikov <oivan@student.ethz.ch> - * @author Lorenz Meier <lm@inf.ethz.ch> + * Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -47,13 +44,13 @@ /** * The number of RC channel inputs supported. - * Current (Q1/2013) radios support up to 18 channels, + * Current (Q4/2013) radios support up to 18 channels, * leaving at a sane value of 15. * This number can be greater then number of RC channels, * because single RC channel can be mapped to multiple * functions, e.g. for various mode switches. */ -#define RC_CHANNELS_MAX 15 +#define RC_CHANNELS_MAPPED_MAX 15 /** * This defines the mapping of the RC functions. @@ -91,7 +88,7 @@ struct rc_channels_s { uint64_t timestamp_last_valid; /**< timestamp of last valid RC signal. */ struct { float scaled; /**< Scaled to -1..1 (throttle: 0..1) */ - } chan[RC_CHANNELS_MAX]; + } chan[RC_CHANNELS_MAPPED_MAX]; uint8_t chan_count; /**< number of valid channels */ /*String array to store the names of the functions*/ |