diff options
Diffstat (limited to 'src/modules')
-rw-r--r-- | src/modules/commander/state_machine_helper.c | 2 | ||||
-rw-r--r-- | src/modules/gpio_led/gpio_led.c | 10 | ||||
-rw-r--r-- | src/modules/px4iofirmware/controls.c | 16 | ||||
-rw-r--r-- | src/modules/px4iofirmware/dsm.c | 5 | ||||
-rw-r--r-- | src/modules/px4iofirmware/i2c.c | 15 | ||||
-rw-r--r-- | src/modules/px4iofirmware/mixer.cpp | 16 | ||||
-rw-r--r-- | src/modules/px4iofirmware/module.mk | 11 | ||||
-rw-r--r-- | src/modules/px4iofirmware/protocol.h | 144 | ||||
-rw-r--r-- | src/modules/px4iofirmware/px4io.c | 26 | ||||
-rw-r--r-- | src/modules/px4iofirmware/px4io.h | 74 | ||||
-rw-r--r-- | src/modules/px4iofirmware/registers.c | 128 | ||||
-rw-r--r-- | src/modules/px4iofirmware/serial.c | 352 | ||||
-rw-r--r-- | src/modules/sensors/sensor_params.c | 6 | ||||
-rw-r--r-- | src/modules/systemlib/systemlib.c | 18 | ||||
-rw-r--r-- | src/modules/systemlib/systemlib.h | 6 |
15 files changed, 693 insertions, 136 deletions
diff --git a/src/modules/commander/state_machine_helper.c b/src/modules/commander/state_machine_helper.c index ab728c7bb..9b6527c33 100644 --- a/src/modules/commander/state_machine_helper.c +++ b/src/modules/commander/state_machine_helper.c @@ -141,7 +141,7 @@ int do_state_update(int status_pub, struct vehicle_status_s *current_status, con current_status->flag_system_armed = false; mavlink_log_critical(mavlink_fd, "REBOOTING SYSTEM"); usleep(500000); - up_systemreset(); + systemreset(false); /* SPECIAL CASE: NEVER RETURNS FROM THIS FUNCTION CALL */ } else { diff --git a/src/modules/gpio_led/gpio_led.c b/src/modules/gpio_led/gpio_led.c index 1aef739c7..7466dfdb9 100644 --- a/src/modules/gpio_led/gpio_led.c +++ b/src/modules/gpio_led/gpio_led.c @@ -109,19 +109,19 @@ int gpio_led_main(int argc, char *argv[]) } else if (!strcmp(argv[3], "a1")) { use_io = true; - pin = PX4IO_ACC1; + pin = PX4IO_P_SETUP_RELAYS_ACC1; } else if (!strcmp(argv[3], "a2")) { use_io = true; - pin = PX4IO_ACC2; + pin = PX4IO_P_SETUP_RELAYS_ACC2; } else if (!strcmp(argv[3], "r1")) { use_io = true; - pin = PX4IO_RELAY1; + pin = PX4IO_P_SETUP_RELAYS_POWER1; } else if (!strcmp(argv[3], "r2")) { use_io = true; - pin = PX4IO_RELAY2; + pin = PX4IO_P_SETUP_RELAYS_POWER2; } else { errx(1, "unsupported pin: %s", argv[3]); @@ -142,7 +142,7 @@ int gpio_led_main(int argc, char *argv[]) char pin_name[24]; if (use_io) { - if (pin & (PX4IO_ACC1 | PX4IO_ACC2)) { + if (pin & (PX4IO_P_SETUP_RELAYS_ACC1 | PX4IO_P_SETUP_RELAYS_ACC2)) { sprintf(pin_name, "PX4IO ACC%i", (pin >> 3)); } else { diff --git a/src/modules/px4iofirmware/controls.c b/src/modules/px4iofirmware/controls.c index 43d96fb06..74037d1c2 100644 --- a/src/modules/px4iofirmware/controls.c +++ b/src/modules/px4iofirmware/controls.c @@ -59,14 +59,14 @@ static perf_counter_t c_gather_ppm; void controls_init(void) { - /* DSM input */ + /* DSM input (USART1) */ dsm_init("/dev/ttyS0"); - /* S.bus input */ + /* S.bus input (USART3) */ sbus_init("/dev/ttyS2"); /* default to a 1:1 input map, all enabled */ - for (unsigned i = 0; i < MAX_CONTROL_CHANNELS; i++) { + for (unsigned i = 0; i < PX4IO_CONTROL_CHANNELS; i++) { unsigned base = PX4IO_P_RC_CONFIG_STRIDE * i; r_page_rc_input_config[base + PX4IO_P_RC_CONFIG_OPTIONS] = 0; @@ -124,7 +124,7 @@ controls_tick() { r_status_flags |= PX4IO_P_STATUS_FLAGS_RC_PPM; perf_end(c_gather_ppm); - ASSERT(r_raw_rc_count <= MAX_CONTROL_CHANNELS); + ASSERT(r_raw_rc_count <= PX4IO_CONTROL_CHANNELS); /* * In some cases we may have received a frame, but input has still @@ -197,7 +197,7 @@ controls_tick() { /* and update the scaled/mapped version */ unsigned mapped = conf[PX4IO_P_RC_CONFIG_ASSIGNMENT]; - ASSERT(mapped < MAX_CONTROL_CHANNELS); + ASSERT(mapped < PX4IO_CONTROL_CHANNELS); /* invert channel if pitch - pulling the lever down means pitching up by convention */ if (mapped == 1) /* roll, pitch, yaw, throttle, override is the standard order */ @@ -209,7 +209,7 @@ controls_tick() { } /* set un-assigned controls to zero */ - for (unsigned i = 0; i < MAX_CONTROL_CHANNELS; i++) { + for (unsigned i = 0; i < PX4IO_CONTROL_CHANNELS; i++) { if (!(assigned_channels & (1 << i))) r_rc_values[i] = 0; } @@ -319,8 +319,8 @@ ppm_input(uint16_t *values, uint16_t *num_values) /* PPM data exists, copy it */ *num_values = ppm_decoded_channels; - if (*num_values > MAX_CONTROL_CHANNELS) - *num_values = MAX_CONTROL_CHANNELS; + if (*num_values > PX4IO_CONTROL_CHANNELS) + *num_values = PX4IO_CONTROL_CHANNELS; for (unsigned i = 0; i < *num_values; i++) values[i] = ppm_buffer[i]; diff --git a/src/modules/px4iofirmware/dsm.c b/src/modules/px4iofirmware/dsm.c index ab6e3fec4..598bcee34 100644 --- a/src/modules/px4iofirmware/dsm.c +++ b/src/modules/px4iofirmware/dsm.c @@ -110,6 +110,10 @@ dsm_bind(uint16_t cmd, int pulses) if (dsm_fd < 0) return; +#ifdef CONFIG_ARCH_BOARD_PX4IO_V2 + // XXX implement + #warning DSM BIND NOT IMPLEMENTED ON PX4IO V2 +#else switch (cmd) { case dsm_bind_power_down: // power down DSM satellite @@ -135,6 +139,7 @@ dsm_bind(uint16_t cmd, int pulses) stm32_configgpio(GPIO_USART1_RX); break; } +#endif } bool diff --git a/src/modules/px4iofirmware/i2c.c b/src/modules/px4iofirmware/i2c.c index 4485daa5b..10aeb5c9f 100644 --- a/src/modules/px4iofirmware/i2c.c +++ b/src/modules/px4iofirmware/i2c.c @@ -1,6 +1,6 @@ /**************************************************************************** * - * Copyright (C) 2012 PX4 Development Team. All rights reserved. + * Copyright (C) 2012,2013 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -69,6 +69,7 @@ static void i2c_rx_setup(void); static void i2c_tx_setup(void); static void i2c_rx_complete(void); static void i2c_tx_complete(void); +static void i2c_dump(void); static DMA_HANDLE rx_dma; static DMA_HANDLE tx_dma; @@ -92,7 +93,7 @@ enum { } direction; void -i2c_init(void) +interface_init(void) { debug("i2c init"); @@ -148,12 +149,18 @@ i2c_init(void) #endif } +void +interface_tick() +{ +} + /* reset the I2C bus used to recover from lockups */ -void i2c_reset(void) +void +i2c_reset(void) { rCR1 |= I2C_CR1_SWRST; rCR1 = 0; @@ -330,7 +337,7 @@ i2c_tx_complete(void) i2c_tx_setup(); } -void +static void i2c_dump(void) { debug("CR1 0x%08x CR2 0x%08x", rCR1, rCR2); diff --git a/src/modules/px4iofirmware/mixer.cpp b/src/modules/px4iofirmware/mixer.cpp index a2193b526..d8c0e58ba 100644 --- a/src/modules/px4iofirmware/mixer.cpp +++ b/src/modules/px4iofirmware/mixer.cpp @@ -154,7 +154,7 @@ mixer_tick(void) if (source == MIX_FAILSAFE) { /* copy failsafe values to the servo outputs */ - for (unsigned i = 0; i < IO_SERVO_COUNT; i++) { + for (unsigned i = 0; i < PX4IO_SERVO_COUNT; i++) { r_page_servos[i] = r_page_servo_failsafe[i]; /* safe actuators for FMU feedback */ @@ -164,11 +164,11 @@ mixer_tick(void) } else if (source != MIX_NONE) { - float outputs[IO_SERVO_COUNT]; + float outputs[PX4IO_SERVO_COUNT]; unsigned mixed; /* mix */ - mixed = mixer_group.mix(&outputs[0], IO_SERVO_COUNT); + mixed = mixer_group.mix(&outputs[0], PX4IO_SERVO_COUNT); /* scale to PWM and update the servo outputs as required */ for (unsigned i = 0; i < mixed; i++) { @@ -180,7 +180,7 @@ mixer_tick(void) r_page_servos[i] = (outputs[i] * 600.0f) + 1500; } - for (unsigned i = mixed; i < IO_SERVO_COUNT; i++) + for (unsigned i = mixed; i < PX4IO_SERVO_COUNT; i++) r_page_servos[i] = 0; } @@ -215,7 +215,7 @@ mixer_tick(void) if (mixer_servos_armed) { /* update the servo outputs. */ - for (unsigned i = 0; i < IO_SERVO_COUNT; i++) + for (unsigned i = 0; i < PX4IO_SERVO_COUNT; i++) up_pwm_servo_set(i, r_page_servos[i]); } } @@ -349,11 +349,11 @@ mixer_set_failsafe() return; /* set failsafe defaults to the values for all inputs = 0 */ - float outputs[IO_SERVO_COUNT]; + float outputs[PX4IO_SERVO_COUNT]; unsigned mixed; /* mix */ - mixed = mixer_group.mix(&outputs[0], IO_SERVO_COUNT); + mixed = mixer_group.mix(&outputs[0], PX4IO_SERVO_COUNT); /* scale to PWM and update the servo outputs as required */ for (unsigned i = 0; i < mixed; i++) { @@ -364,7 +364,7 @@ mixer_set_failsafe() } /* disable the rest of the outputs */ - for (unsigned i = mixed; i < IO_SERVO_COUNT; i++) + for (unsigned i = mixed; i < PX4IO_SERVO_COUNT; i++) r_page_servo_failsafe[i] = 0; } diff --git a/src/modules/px4iofirmware/module.mk b/src/modules/px4iofirmware/module.mk index 6379366f4..59f470a94 100644 --- a/src/modules/px4iofirmware/module.mk +++ b/src/modules/px4iofirmware/module.mk @@ -3,17 +3,22 @@ SRCS = adc.c \ controls.c \ dsm.c \ - i2c.c \ px4io.c \ registers.c \ safety.c \ sbus.c \ ../systemlib/up_cxxinitialize.c \ - ../systemlib/hx_stream.c \ ../systemlib/perf_counter.c \ mixer.cpp \ ../systemlib/mixer/mixer.cpp \ ../systemlib/mixer/mixer_group.cpp \ ../systemlib/mixer/mixer_multirotor.cpp \ ../systemlib/mixer/mixer_simple.cpp \ -
\ No newline at end of file + +ifeq ($(BOARD),px4io-v1) +SRCS += i2c.c +endif +ifeq ($(BOARD),px4io-v2) +SRCS += serial.c \ + ../systemlib/hx_stream.c +endif diff --git a/src/modules/px4iofirmware/protocol.h b/src/modules/px4iofirmware/protocol.h index 88d8cc87c..3c59a75a7 100644 --- a/src/modules/px4iofirmware/protocol.h +++ b/src/modules/px4iofirmware/protocol.h @@ -36,7 +36,7 @@ /** * @file protocol.h * - * PX4IO I2C interface protocol. + * PX4IO interface protocol. * * Communication is performed via writes to and reads from 16-bit virtual * registers organised into pages of 255 registers each. @@ -45,7 +45,7 @@ * respectively. Subsequent reads and writes increment the offset within * the page. * - * Most pages are readable or writable but not both. + * Some pages are read- or write-only. * * Note that some pages may permit offset values greater than 255, which * can only be achieved by long writes. The offset does not wrap. @@ -62,12 +62,11 @@ * Note that the implementation of readable pages prefers registers within * readable pages to be densely packed. Page numbers do not need to be * packed. + * + * Definitions marked 1 are only valid on PX4IOv1 boards. Likewise, + * [2] denotes definitions specific to the PX4IOv2 board. */ -#define PX4IO_CONTROL_CHANNELS 8 -#define PX4IO_INPUT_CHANNELS 12 -#define PX4IO_RELAY_CHANNELS 4 - /* Per C, this is safe for all 2's complement systems */ #define REG_TO_SIGNED(_reg) ((int16_t)(_reg)) #define SIGNED_TO_REG(_signed) ((uint16_t)(_signed)) @@ -75,10 +74,12 @@ #define REG_TO_FLOAT(_reg) ((float)REG_TO_SIGNED(_reg) / 10000.0f) #define FLOAT_TO_REG(_float) SIGNED_TO_REG((int16_t)((_float) * 10000.0f)) +#define PX4IO_PROTOCOL_VERSION 2 + /* static configuration page */ #define PX4IO_PAGE_CONFIG 0 -#define PX4IO_P_CONFIG_PROTOCOL_VERSION 0 /* magic numbers TBD */ -#define PX4IO_P_CONFIG_SOFTWARE_VERSION 1 /* magic numbers TBD */ +#define PX4IO_P_CONFIG_PROTOCOL_VERSION 0 /* PX4IO_PROTOCOL_VERSION */ +#define PX4IO_P_CONFIG_HARDWARE_VERSION 1 /* magic numbers TBD */ #define PX4IO_P_CONFIG_BOOTLOADER_VERSION 2 /* get this how? */ #define PX4IO_P_CONFIG_MAX_TRANSFER 3 /* maximum I2C transfer size */ #define PX4IO_P_CONFIG_CONTROL_COUNT 4 /* hardcoded max control count supported */ @@ -108,16 +109,20 @@ #define PX4IO_P_STATUS_FLAGS_RC_DSM11 (1 << 12) /* DSM input is 11 bit data */ #define PX4IO_P_STATUS_ALARMS 3 /* alarm flags - alarms latch, write 1 to a bit to clear it */ -#define PX4IO_P_STATUS_ALARMS_VBATT_LOW (1 << 0) /* VBatt is very close to regulator dropout */ +#define PX4IO_P_STATUS_ALARMS_VBATT_LOW (1 << 0) /* [1] VBatt is very close to regulator dropout */ #define PX4IO_P_STATUS_ALARMS_TEMPERATURE (1 << 1) /* board temperature is high */ -#define PX4IO_P_STATUS_ALARMS_SERVO_CURRENT (1 << 2) /* servo current limit was exceeded */ -#define PX4IO_P_STATUS_ALARMS_ACC_CURRENT (1 << 3) /* accessory current limit was exceeded */ +#define PX4IO_P_STATUS_ALARMS_SERVO_CURRENT (1 << 2) /* [1] servo current limit was exceeded */ +#define PX4IO_P_STATUS_ALARMS_ACC_CURRENT (1 << 3) /* [1] accessory current limit was exceeded */ #define PX4IO_P_STATUS_ALARMS_FMU_LOST (1 << 4) /* timed out waiting for controls from FMU */ #define PX4IO_P_STATUS_ALARMS_RC_LOST (1 << 5) /* timed out waiting for RC input */ #define PX4IO_P_STATUS_ALARMS_PWM_ERROR (1 << 6) /* PWM configuration or output was bad */ +#define PX4IO_P_STATUS_ALARMS_VSERVO_FAULT (1 << 7) /* [2] VServo was out of the valid range (2.5 - 5.5 V) */ -#define PX4IO_P_STATUS_VBATT 4 /* battery voltage in mV */ -#define PX4IO_P_STATUS_IBATT 5 /* battery current (raw ADC) */ +#define PX4IO_P_STATUS_VBATT 4 /* [1] battery voltage in mV */ +#define PX4IO_P_STATUS_IBATT 5 /* [1] battery current (raw ADC) */ +#define PX4IO_P_STATUS_VSERVO 6 /* [2] servo rail voltage in mV */ +#define PX4IO_P_STATUS_VRSSI 7 /* [2] RSSI voltage */ +#define PX4IO_P_STATUS_PRSSI 8 /* [2] RSSI PWM value */ /* array of post-mix actuator outputs, -10000..10000 */ #define PX4IO_PAGE_ACTUATORS 2 /* 0..CONFIG_ACTUATOR_COUNT-1 */ @@ -143,7 +148,7 @@ #define PX4IO_RATE_MAP_BASE 0 /* 0..CONFIG_ACTUATOR_COUNT bitmaps of PWM rate groups */ /* setup page */ -#define PX4IO_PAGE_SETUP 100 +#define PX4IO_PAGE_SETUP 50 #define PX4IO_P_SETUP_FEATURES 0 #define PX4IO_P_SETUP_ARMING 1 /* arming controls */ @@ -156,33 +161,34 @@ #define PX4IO_P_SETUP_PWM_RATES 2 /* bitmask, 0 = low rate, 1 = high rate */ #define PX4IO_P_SETUP_PWM_DEFAULTRATE 3 /* 'low' PWM frame output rate in Hz */ #define PX4IO_P_SETUP_PWM_ALTRATE 4 /* 'high' PWM frame output rate in Hz */ -#define PX4IO_P_SETUP_RELAYS 5 /* bitmask of relay/switch outputs, 0 = off, 1 = on */ -/* px4io relay bit definitions */ -#define PX4IO_RELAY1 (1<<0) -#define PX4IO_RELAY2 (1<<1) -#define PX4IO_ACC1 (1<<2) -#define PX4IO_ACC2 (1<<3) +#define PX4IO_P_SETUP_RELAYS 5 /* bitmask of relay/switch outputs, 0 = off, 1 = on */ +#define PX4IO_P_SETUP_RELAYS_POWER1 (1<<0) /* hardware rev [1] power relay 1 */ +#define PX4IO_P_SETUP_RELAYS_POWER2 (1<<1) /* hardware rev [1] power relay 2 */ +#define PX4IO_P_SETUP_RELAYS_ACC1 (1<<2) /* hardware rev [1] accessory power 1 */ +#define PX4IO_P_SETUP_RELAYS_ACC2 (1<<3) /* hardware rev [1] accessory power 2 */ -#define PX4IO_P_SETUP_VBATT_SCALE 6 /* battery voltage correction factor (float) */ -#define PX4IO_P_SETUP_DSM 7 /* DSM bind state */ -enum { /* DSM bind states */ +#define PX4IO_P_SETUP_VBATT_SCALE 6 /* hardware rev [1] battery voltage correction factor (float) */ +#define PX4IO_P_SETUP_VSERVO_SCALE 6 /* hardware rev [2] servo voltage correction factor (float) */ +#define PX4IO_P_SETUP_DSM 7 /* DSM bind state */ +enum { /* DSM bind states */ dsm_bind_power_down = 0, dsm_bind_power_up, dsm_bind_set_rx_out, dsm_bind_send_pulses, dsm_bind_reinit_uart }; + /* 8 */ #define PX4IO_P_SETUP_SET_DEBUG 9 /* debug level for IO board */ /* autopilot control values, -10000..10000 */ -#define PX4IO_PAGE_CONTROLS 101 /* 0..CONFIG_CONTROL_COUNT */ +#define PX4IO_PAGE_CONTROLS 51 /* 0..CONFIG_CONTROL_COUNT */ /* raw text load to the mixer parser - ignores offset */ -#define PX4IO_PAGE_MIXERLOAD 102 +#define PX4IO_PAGE_MIXERLOAD 52 /* R/C channel config */ -#define PX4IO_PAGE_RC_CONFIG 103 /* R/C input configuration */ +#define PX4IO_PAGE_RC_CONFIG 53 /* R/C input configuration */ #define PX4IO_P_RC_CONFIG_MIN 0 /* lowest input value */ #define PX4IO_P_RC_CONFIG_CENTER 1 /* center input value */ #define PX4IO_P_RC_CONFIG_MAX 2 /* highest input value */ @@ -194,10 +200,14 @@ enum { /* DSM bind states */ #define PX4IO_P_RC_CONFIG_STRIDE 6 /* spacing between channel config data */ /* PWM output - overrides mixer */ -#define PX4IO_PAGE_DIRECT_PWM 104 /* 0..CONFIG_ACTUATOR_COUNT-1 */ +#define PX4IO_PAGE_DIRECT_PWM 54 /* 0..CONFIG_ACTUATOR_COUNT-1 */ /* PWM failsafe values - zero disables the output */ -#define PX4IO_PAGE_FAILSAFE_PWM 105 /* 0..CONFIG_ACTUATOR_COUNT-1 */ +#define PX4IO_PAGE_FAILSAFE_PWM 55 /* 0..CONFIG_ACTUATOR_COUNT-1 */ + +/* Debug and test page - not used in normal operation */ +#define PX4IO_PAGE_TEST 127 +#define PX4IO_P_TEST_LED 0 /* set the amber LED on/off */ /** * As-needed mixer data upload. @@ -218,3 +228,81 @@ struct px4io_mixdata { }; #pragma pack(pop) +/** + * Serial protocol encapsulation. + */ + +#define PKT_MAX_REGS 32 // by agreement w/FMU + +#pragma pack(push, 1) +struct IOPacket { + uint8_t count_code; + uint8_t crc; + uint8_t page; + uint8_t offset; + uint16_t regs[PKT_MAX_REGS]; +}; +#pragma pack(pop) + +#define PKT_CODE_READ 0x00 /* FMU->IO read transaction */ +#define PKT_CODE_WRITE 0x40 /* FMU->IO write transaction */ +#define PKT_CODE_SUCCESS 0x00 /* IO->FMU success reply */ +#define PKT_CODE_CORRUPT 0x40 /* IO->FMU bad packet reply */ +#define PKT_CODE_ERROR 0x80 /* IO->FMU register op error reply */ + +#define PKT_CODE_MASK 0xc0 +#define PKT_COUNT_MASK 0x3f + +#define PKT_COUNT(_p) ((_p).count_code & PKT_COUNT_MASK) +#define PKT_CODE(_p) ((_p).count_code & PKT_CODE_MASK) +#define PKT_SIZE(_p) ((uint8_t *)&((_p).regs[PKT_COUNT(_p)]) - ((uint8_t *)&(_p))) + +static const uint8_t crc8_tab[256] __attribute__((unused)) = +{ + 0x00, 0x07, 0x0E, 0x09, 0x1C, 0x1B, 0x12, 0x15, + 0x38, 0x3F, 0x36, 0x31, 0x24, 0x23, 0x2A, 0x2D, + 0x70, 0x77, 0x7E, 0x79, 0x6C, 0x6B, 0x62, 0x65, + 0x48, 0x4F, 0x46, 0x41, 0x54, 0x53, 0x5A, 0x5D, + 0xE0, 0xE7, 0xEE, 0xE9, 0xFC, 0xFB, 0xF2, 0xF5, + 0xD8, 0xDF, 0xD6, 0xD1, 0xC4, 0xC3, 0xCA, 0xCD, + 0x90, 0x97, 0x9E, 0x99, 0x8C, 0x8B, 0x82, 0x85, + 0xA8, 0xAF, 0xA6, 0xA1, 0xB4, 0xB3, 0xBA, 0xBD, + 0xC7, 0xC0, 0xC9, 0xCE, 0xDB, 0xDC, 0xD5, 0xD2, + 0xFF, 0xF8, 0xF1, 0xF6, 0xE3, 0xE4, 0xED, 0xEA, + 0xB7, 0xB0, 0xB9, 0xBE, 0xAB, 0xAC, 0xA5, 0xA2, + 0x8F, 0x88, 0x81, 0x86, 0x93, 0x94, 0x9D, 0x9A, + 0x27, 0x20, 0x29, 0x2E, 0x3B, 0x3C, 0x35, 0x32, + 0x1F, 0x18, 0x11, 0x16, 0x03, 0x04, 0x0D, 0x0A, + 0x57, 0x50, 0x59, 0x5E, 0x4B, 0x4C, 0x45, 0x42, + 0x6F, 0x68, 0x61, 0x66, 0x73, 0x74, 0x7D, 0x7A, + 0x89, 0x8E, 0x87, 0x80, 0x95, 0x92, 0x9B, 0x9C, + 0xB1, 0xB6, 0xBF, 0xB8, 0xAD, 0xAA, 0xA3, 0xA4, + 0xF9, 0xFE, 0xF7, 0xF0, 0xE5, 0xE2, 0xEB, 0xEC, + 0xC1, 0xC6, 0xCF, 0xC8, 0xDD, 0xDA, 0xD3, 0xD4, + 0x69, 0x6E, 0x67, 0x60, 0x75, 0x72, 0x7B, 0x7C, + 0x51, 0x56, 0x5F, 0x58, 0x4D, 0x4A, 0x43, 0x44, + 0x19, 0x1E, 0x17, 0x10, 0x05, 0x02, 0x0B, 0x0C, + 0x21, 0x26, 0x2F, 0x28, 0x3D, 0x3A, 0x33, 0x34, + 0x4E, 0x49, 0x40, 0x47, 0x52, 0x55, 0x5C, 0x5B, + 0x76, 0x71, 0x78, 0x7F, 0x6A, 0x6D, 0x64, 0x63, + 0x3E, 0x39, 0x30, 0x37, 0x22, 0x25, 0x2C, 0x2B, + 0x06, 0x01, 0x08, 0x0F, 0x1A, 0x1D, 0x14, 0x13, + 0xAE, 0xA9, 0xA0, 0xA7, 0xB2, 0xB5, 0xBC, 0xBB, + 0x96, 0x91, 0x98, 0x9F, 0x8A, 0x8D, 0x84, 0x83, + 0xDE, 0xD9, 0xD0, 0xD7, 0xC2, 0xC5, 0xCC, 0xCB, + 0xE6, 0xE1, 0xE8, 0xEF, 0xFA, 0xFD, 0xF4, 0xF3 +}; + +static uint8_t crc_packet(struct IOPacket *pkt) __attribute__((unused)); +static uint8_t +crc_packet(struct IOPacket *pkt) +{ + uint8_t *end = (uint8_t *)(&pkt->regs[PKT_COUNT(*pkt)]); + uint8_t *p = (uint8_t *)pkt; + uint8_t c = 0; + + while (p < end) + c = crc8_tab[c ^ *(p++)]; + + return c; +} diff --git a/src/modules/px4iofirmware/px4io.c b/src/modules/px4iofirmware/px4io.c index bc8dfc116..e70b3fe88 100644 --- a/src/modules/px4iofirmware/px4io.c +++ b/src/modules/px4iofirmware/px4io.c @@ -64,11 +64,6 @@ struct sys_state_s system_state; static struct hrt_call serial_dma_call; -#ifdef CONFIG_STM32_I2C1 -/* store i2c reset count XXX this should be a register, together with other error counters */ -volatile uint32_t i2c_loop_resets = 0; -#endif - /* * a set of debug buffers to allow us to send debug information from ISRs */ @@ -147,8 +142,10 @@ user_start(int argc, char *argv[]) LED_BLUE(false); LED_SAFETY(false); - /* turn on servo power */ + /* turn on servo power (if supported) */ +#ifdef POWER_SERVO POWER_SERVO(true); +#endif /* start the safety switch handler */ safety_init(); @@ -159,10 +156,11 @@ user_start(int argc, char *argv[]) /* initialise the control inputs */ controls_init(); -#ifdef CONFIG_STM32_I2C1 - /* start the i2c handler */ - i2c_init(); -#endif + /* start the FMU interface */ + interface_init(); + + /* add a performance counter for the interface */ + perf_counter_t interface_perf = perf_alloc(PC_ELAPSED, "interface"); /* add a performance counter for mixing */ perf_counter_t mixer_perf = perf_alloc(PC_ELAPSED, "mix"); @@ -205,6 +203,11 @@ user_start(int argc, char *argv[]) /* track the rate at which the loop is running */ perf_count(loop_perf); + /* kick the interface */ + perf_begin(interface_perf); + interface_tick(); + perf_end(interface_perf); + /* kick the mixer */ perf_begin(mixer_perf); mixer_tick(); @@ -223,12 +226,11 @@ user_start(int argc, char *argv[]) struct mallinfo minfo = mallinfo(); - isr_debug(1, "d:%u s=0x%x a=0x%x f=0x%x r=%u m=%u", + isr_debug(1, "d:%u s=0x%x a=0x%x f=0x%x m=%u", (unsigned)r_page_setup[PX4IO_P_SETUP_SET_DEBUG], (unsigned)r_status_flags, (unsigned)r_setup_arming, (unsigned)r_setup_features, - (unsigned)i2c_loop_resets, (unsigned)minfo.mxordblk); last_debug_time = hrt_absolute_time(); } diff --git a/src/modules/px4iofirmware/px4io.h b/src/modules/px4iofirmware/px4io.h index 83feeb9b6..9eb092a63 100644 --- a/src/modules/px4iofirmware/px4io.h +++ b/src/modules/px4iofirmware/px4io.h @@ -42,15 +42,16 @@ #include <stdbool.h> #include <stdint.h> -#include <drivers/boards/px4io/px4io_internal.h> +#include <board_config.h> #include "protocol.h" /* * Constants and limits. */ -#define MAX_CONTROL_CHANNELS 12 -#define IO_SERVO_COUNT 8 +#define PX4IO_SERVO_COUNT 8 +#define PX4IO_CONTROL_CHANNELS 8 +#define PX4IO_INPUT_CHANNELS 12 /* * Debug logging @@ -119,32 +120,43 @@ extern struct sys_state_s system_state; /* * GPIO handling. */ -#define LED_BLUE(_s) stm32_gpiowrite(GPIO_LED1, !(_s)) -#define LED_AMBER(_s) stm32_gpiowrite(GPIO_LED2, !(_s)) -#define LED_SAFETY(_s) stm32_gpiowrite(GPIO_LED3, !(_s)) +#define LED_BLUE(_s) stm32_gpiowrite(GPIO_LED1, !(_s)) +#define LED_AMBER(_s) stm32_gpiowrite(GPIO_LED2, !(_s)) +#define LED_SAFETY(_s) stm32_gpiowrite(GPIO_LED3, !(_s)) + +#ifdef CONFIG_ARCH_BOARD_PX4IO_V1 + +# define PX4IO_RELAY_CHANNELS 4 +# define POWER_SERVO(_s) stm32_gpiowrite(GPIO_SERVO_PWR_EN, (_s)) +# define POWER_ACC1(_s) stm32_gpiowrite(GPIO_ACC1_PWR_EN, (_s)) +# define POWER_ACC2(_s) stm32_gpiowrite(GPIO_ACC2_PWR_EN, (_s)) +# define POWER_RELAY1(_s) stm32_gpiowrite(GPIO_RELAY1_EN, (_s)) +# define POWER_RELAY2(_s) stm32_gpiowrite(GPIO_RELAY2_EN, (_s)) + +# define OVERCURRENT_ACC (!stm32_gpioread(GPIO_ACC_OC_DETECT)) +# define OVERCURRENT_SERVO (!stm32_gpioread(GPIO_SERVO_OC_DETECT)) + +# define PX4IO_ADC_CHANNEL_COUNT 2 +# define ADC_VBATT 4 +# define ADC_IN5 5 -#define POWER_SERVO(_s) stm32_gpiowrite(GPIO_SERVO_PWR_EN, (_s)) -#ifdef GPIO_ACC1_PWR_EN - #define POWER_ACC1(_s) stm32_gpiowrite(GPIO_ACC1_PWR_EN, (_s)) -#endif -#ifdef GPIO_ACC2_PWR_EN - #define POWER_ACC2(_s) stm32_gpiowrite(GPIO_ACC2_PWR_EN, (_s)) -#endif -#ifdef GPIO_RELAY1_EN - #define POWER_RELAY1(_s) stm32_gpiowrite(GPIO_RELAY1_EN, (_s)) #endif -#ifdef GPIO_RELAY2_EN - #define POWER_RELAY2(_s) stm32_gpiowrite(GPIO_RELAY2_EN, (_s)) + +#ifdef CONFIG_ARCH_BOARD_PX4IO_V2 + +# define PX4IO_RELAY_CHANNELS 0 +# define POWER_SPEKTRUM(_s) stm32_gpiowrite(GPIO_SPEKTRUM_PWR_EN, (_s)) + +# define VDD_SERVO_FAULT (!stm32_gpioread(GPIO_SERVO_FAULT_DETECT)) + +# define PX4IO_ADC_CHANNEL_COUNT 2 +# define ADC_VSERVO 4 +# define ADC_RSSI 5 + #endif -#define OVERCURRENT_ACC (!stm32_gpioread(GPIO_ACC_OC_DETECT)) -#define OVERCURRENT_SERVO (!stm32_gpioread(GPIO_SERVO_OC_DETECT)) #define BUTTON_SAFETY stm32_gpioread(GPIO_BTN_SAFETY) -#define ADC_VBATT 4 -#define ADC_IN5 5 -#define ADC_CHANNEL_COUNT 2 - /* * Mixer */ @@ -156,17 +168,16 @@ extern void mixer_handle_text(const void *buffer, size_t length); */ extern void safety_init(void); -#ifdef CONFIG_STM32_I2C1 /** * FMU communications */ -extern void i2c_init(void); -#endif +extern void interface_init(void); +extern void interface_tick(void); /** * Register space */ -extern void registers_set(uint8_t page, uint8_t offset, const uint16_t *values, unsigned num_values); +extern int registers_set(uint8_t page, uint8_t offset, const uint16_t *values, unsigned num_values); extern int registers_get(uint8_t page, uint8_t offset, uint16_t **values, unsigned *num_values); /** @@ -191,10 +202,5 @@ extern bool sbus_input(uint16_t *values, uint16_t *num_values); /** global debug level for isr_debug() */ extern volatile uint8_t debug_level; -/* send a debug message to the console */ -extern void isr_debug(uint8_t level, const char *fmt, ...); - -#ifdef CONFIG_STM32_I2C1 -void i2c_dump(void); -void i2c_reset(void); -#endif +/** send a debug message to the console */ +extern void isr_debug(uint8_t level, const char *fmt, ...); diff --git a/src/modules/px4iofirmware/registers.c b/src/modules/px4iofirmware/registers.c index a922362b6..3f241d29c 100644 --- a/src/modules/px4iofirmware/registers.c +++ b/src/modules/px4iofirmware/registers.c @@ -44,6 +44,7 @@ #include <string.h> #include <drivers/drv_hrt.h> +#include <drivers/drv_pwm_output.h> #include "px4io.h" #include "protocol.h" @@ -57,14 +58,18 @@ static void pwm_configure_rates(uint16_t map, uint16_t defaultrate, uint16_t alt * Static configuration parameters. */ static const uint16_t r_page_config[] = { - [PX4IO_P_CONFIG_PROTOCOL_VERSION] = 1, /* XXX hardcoded magic number */ - [PX4IO_P_CONFIG_SOFTWARE_VERSION] = 1, /* XXX hardcoded magic number */ + [PX4IO_P_CONFIG_PROTOCOL_VERSION] = PX4IO_PROTOCOL_VERSION, +#ifdef CONFIG_ARCH_BOARD_PX4IO_V2 + [PX4IO_P_CONFIG_HARDWARE_VERSION] = 2, +#else + [PX4IO_P_CONFIG_HARDWARE_VERSION] = 1, +#endif [PX4IO_P_CONFIG_BOOTLOADER_VERSION] = 3, /* XXX hardcoded magic number */ [PX4IO_P_CONFIG_MAX_TRANSFER] = 64, /* XXX hardcoded magic number */ [PX4IO_P_CONFIG_CONTROL_COUNT] = PX4IO_CONTROL_CHANNELS, - [PX4IO_P_CONFIG_ACTUATOR_COUNT] = IO_SERVO_COUNT, - [PX4IO_P_CONFIG_RC_INPUT_COUNT] = MAX_CONTROL_CHANNELS, - [PX4IO_P_CONFIG_ADC_INPUT_COUNT] = ADC_CHANNEL_COUNT, + [PX4IO_P_CONFIG_ACTUATOR_COUNT] = PX4IO_SERVO_COUNT, + [PX4IO_P_CONFIG_RC_INPUT_COUNT] = PX4IO_CONTROL_CHANNELS, + [PX4IO_P_CONFIG_ADC_INPUT_COUNT] = PX4IO_ADC_CHANNEL_COUNT, [PX4IO_P_CONFIG_RELAY_COUNT] = PX4IO_RELAY_CHANNELS, }; @@ -79,7 +84,10 @@ uint16_t r_page_status[] = { [PX4IO_P_STATUS_FLAGS] = 0, [PX4IO_P_STATUS_ALARMS] = 0, [PX4IO_P_STATUS_VBATT] = 0, - [PX4IO_P_STATUS_IBATT] = 0 + [PX4IO_P_STATUS_IBATT] = 0, + [PX4IO_P_STATUS_VSERVO] = 0, + [PX4IO_P_STATUS_VRSSI] = 0, + [PX4IO_P_STATUS_PRSSI] = 0 }; /** @@ -87,14 +95,14 @@ uint16_t r_page_status[] = { * * Post-mixed actuator values. */ -uint16_t r_page_actuators[IO_SERVO_COUNT]; +uint16_t r_page_actuators[PX4IO_SERVO_COUNT]; /** * PAGE 3 * * Servo PWM values */ -uint16_t r_page_servos[IO_SERVO_COUNT]; +uint16_t r_page_servos[PX4IO_SERVO_COUNT]; /** * PAGE 4 @@ -104,7 +112,7 @@ uint16_t r_page_servos[IO_SERVO_COUNT]; uint16_t r_page_raw_rc_input[] = { [PX4IO_P_RAW_RC_COUNT] = 0, - [PX4IO_P_RAW_RC_BASE ... (PX4IO_P_RAW_RC_BASE + MAX_CONTROL_CHANNELS)] = 0 + [PX4IO_P_RAW_RC_BASE ... (PX4IO_P_RAW_RC_BASE + PX4IO_CONTROL_CHANNELS)] = 0 }; /** @@ -114,7 +122,7 @@ uint16_t r_page_raw_rc_input[] = */ uint16_t r_page_rc_input[] = { [PX4IO_P_RC_VALID] = 0, - [PX4IO_P_RC_BASE ... (PX4IO_P_RC_BASE + MAX_CONTROL_CHANNELS)] = 0 + [PX4IO_P_RC_BASE ... (PX4IO_P_RC_BASE + PX4IO_CONTROL_CHANNELS)] = 0 }; /** @@ -138,7 +146,11 @@ volatile uint16_t r_page_setup[] = [PX4IO_P_SETUP_PWM_DEFAULTRATE] = 50, [PX4IO_P_SETUP_PWM_ALTRATE] = 200, [PX4IO_P_SETUP_RELAYS] = 0, +#ifdef ADC_VSERVO + [PX4IO_P_SETUP_VSERVO_SCALE] = 10000, +#else [PX4IO_P_SETUP_VBATT_SCALE] = 10000, +#endif [PX4IO_P_SETUP_SET_DEBUG] = 0, }; @@ -147,7 +159,7 @@ volatile uint16_t r_page_setup[] = PX4IO_P_SETUP_ARMING_MANUAL_OVERRIDE_OK | \ PX4IO_P_SETUP_ARMING_INAIR_RESTART_OK | \ PX4IO_P_SETUP_ARMING_IO_ARM_OK) -#define PX4IO_P_SETUP_RATES_VALID ((1 << IO_SERVO_COUNT) - 1) +#define PX4IO_P_SETUP_RATES_VALID ((1 << PX4IO_SERVO_COUNT) - 1) #define PX4IO_P_SETUP_RELAYS_VALID ((1 << PX4IO_RELAY_CHANNELS) - 1) /** @@ -166,7 +178,7 @@ volatile uint16_t r_page_controls[PX4IO_CONTROL_CHANNELS]; * * R/C channel input configuration. */ -uint16_t r_page_rc_input_config[MAX_CONTROL_CHANNELS * PX4IO_P_RC_CONFIG_STRIDE]; +uint16_t r_page_rc_input_config[PX4IO_CONTROL_CHANNELS * PX4IO_P_RC_CONFIG_STRIDE]; /* valid options */ #define PX4IO_P_RC_CONFIG_OPTIONS_VALID (PX4IO_P_RC_CONFIG_OPTIONS_REVERSE | PX4IO_P_RC_CONFIG_OPTIONS_ENABLED) @@ -182,9 +194,9 @@ uint16_t r_page_rc_input_config[MAX_CONTROL_CHANNELS * PX4IO_P_RC_CONFIG_STRIDE * * Disable pulses as default. */ -uint16_t r_page_servo_failsafe[IO_SERVO_COUNT] = { 0 }; +uint16_t r_page_servo_failsafe[PX4IO_SERVO_COUNT] = { 0 }; -void +int registers_set(uint8_t page, uint8_t offset, const uint16_t *values, unsigned num_values) { @@ -233,7 +245,7 @@ registers_set(uint8_t page, uint8_t offset, const uint16_t *values, unsigned num case PX4IO_PAGE_FAILSAFE_PWM: /* copy channel data */ - while ((offset < IO_SERVO_COUNT) && (num_values > 0)) { + while ((offset < PX4IO_SERVO_COUNT) && (num_values > 0)) { /* XXX range-check value? */ r_page_servo_failsafe[offset] = *values; @@ -260,11 +272,13 @@ registers_set(uint8_t page, uint8_t offset, const uint16_t *values, unsigned num /* iterate individual registers, set each in turn */ while (num_values--) { if (registers_set_one(page, offset, *values)) - break; + return -1; offset++; values++; } + break; } + return 0; } static int @@ -349,10 +363,22 @@ registers_set_one(uint8_t page, uint8_t offset, uint16_t value) case PX4IO_P_SETUP_RELAYS: value &= PX4IO_P_SETUP_RELAYS_VALID; r_setup_relays = value; - POWER_RELAY1(value & PX4IO_RELAY1 ? 1 : 0); - POWER_RELAY2(value & PX4IO_RELAY2 ? 1 : 0); - POWER_ACC1(value & PX4IO_ACC1 ? 1 : 0); - POWER_ACC2(value & PX4IO_ACC2 ? 1 : 0); +#ifdef POWER_RELAY1 + POWER_RELAY1((value & PX4IO_P_SETUP_RELAYS_POWER1) ? 1 : 0); +#endif +#ifdef POWER_RELAY2 + POWER_RELAY2((value & PX4IO_P_SETUP_RELAYS_POWER2) ? 1 : 0); +#endif +#ifdef POWER_ACC1 + POWER_ACC1((value & PX4IO_P_SETUP_RELAYS_ACC1) ? 1 : 0); +#endif +#ifdef POWER_ACC2 + POWER_ACC2((value & PX4IO_P_SETUP_RELAYS_ACC2) ? 1 : 0); +#endif + break; + + case PX4IO_P_SETUP_VBATT_SCALE: + r_page_setup[PX4IO_P_SETUP_VBATT_SCALE] = value; break; case PX4IO_P_SETUP_SET_DEBUG: @@ -381,7 +407,7 @@ registers_set_one(uint8_t page, uint8_t offset, uint16_t value) unsigned index = offset - channel * PX4IO_P_RC_CONFIG_STRIDE; uint16_t *conf = &r_page_rc_input_config[channel * PX4IO_P_RC_CONFIG_STRIDE]; - if (channel >= MAX_CONTROL_CHANNELS) + if (channel >= PX4IO_CONTROL_CHANNELS) return -1; /* disable the channel until we have a chance to sanity-check it */ @@ -426,7 +452,7 @@ registers_set_one(uint8_t page, uint8_t offset, uint16_t value) if (conf[PX4IO_P_RC_CONFIG_DEADZONE] > 500) { count++; } - if (conf[PX4IO_P_RC_CONFIG_ASSIGNMENT] >= MAX_CONTROL_CHANNELS) { + if (conf[PX4IO_P_RC_CONFIG_ASSIGNMENT] >= PX4IO_CONTROL_CHANNELS) { count++; } @@ -446,6 +472,14 @@ registers_set_one(uint8_t page, uint8_t offset, uint16_t value) /* case PX4IO_RC_PAGE_CONFIG */ } + case PX4IO_PAGE_TEST: + switch (offset) { + case PX4IO_P_TEST_LED: + LED_AMBER(value & 1); + break; + } + break; + default: return -1; } @@ -482,6 +516,7 @@ registers_get(uint8_t page, uint8_t offset, uint16_t **values, unsigned *num_val /* PX4IO_P_STATUS_ALARMS maintained externally */ +#ifdef ADC_VBATT /* PX4IO_P_STATUS_VBATT */ { /* @@ -515,7 +550,8 @@ registers_get(uint8_t page, uint8_t offset, uint16_t **values, unsigned *num_val r_page_status[PX4IO_P_STATUS_VBATT] = corrected; } } - +#endif +#ifdef ADC_IBATT /* PX4IO_P_STATUS_IBATT */ { /* @@ -525,26 +561,62 @@ registers_get(uint8_t page, uint8_t offset, uint16_t **values, unsigned *num_val FMU sort it out, with user selectable configuration for their sensor */ - unsigned counts = adc_measure(ADC_IN5); + unsigned counts = adc_measure(ADC_IBATT); if (counts != 0xffff) { r_page_status[PX4IO_P_STATUS_IBATT] = counts; } } +#endif +#ifdef ADC_VSERVO + /* PX4IO_P_STATUS_VSERVO */ + { + /* + * Coefficients here derived by measurement of the 5-16V + * range on one unit: + * + * XXX pending measurements + * + * slope = xxx + * intercept = xxx + * + * Intercept corrected for best results @ 5.0V. + */ + unsigned counts = adc_measure(ADC_VSERVO); + if (counts != 0xffff) { + unsigned mV = (4150 + (counts * 46)) / 10 - 200; + unsigned corrected = (mV * r_page_setup[PX4IO_P_SETUP_VSERVO_SCALE]) / 10000; + + r_page_status[PX4IO_P_STATUS_VSERVO] = corrected; + } + } +#endif + /* XXX PX4IO_P_STATUS_VRSSI */ + /* XXX PX4IO_P_STATUS_PRSSI */ SELECT_PAGE(r_page_status); break; case PX4IO_PAGE_RAW_ADC_INPUT: memset(r_page_scratch, 0, sizeof(r_page_scratch)); +#ifdef ADC_VBATT r_page_scratch[0] = adc_measure(ADC_VBATT); - r_page_scratch[1] = adc_measure(ADC_IN5); - +#endif +#ifdef ADC_IBATT + r_page_scratch[1] = adc_measure(ADC_IBATT); +#endif + +#ifdef ADC_VSERVO + r_page_scratch[0] = adc_measure(ADC_VSERVO); +#endif +#ifdef ADC_RSSI + r_page_scratch[1] = adc_measure(ADC_RSSI); +#endif SELECT_PAGE(r_page_scratch); break; case PX4IO_PAGE_PWM_INFO: memset(r_page_scratch, 0, sizeof(r_page_scratch)); - for (unsigned i = 0; i < IO_SERVO_COUNT; i++) + for (unsigned i = 0; i < PX4IO_SERVO_COUNT; i++) r_page_scratch[PX4IO_RATE_MAP_BASE + i] = up_pwm_servo_get_rate_group(i); SELECT_PAGE(r_page_scratch); @@ -616,7 +688,7 @@ static void pwm_configure_rates(uint16_t map, uint16_t defaultrate, uint16_t altrate) { for (unsigned pass = 0; pass < 2; pass++) { - for (unsigned group = 0; group < IO_SERVO_COUNT; group++) { + for (unsigned group = 0; group < PX4IO_SERVO_COUNT; group++) { /* get the channel mask for this rate group */ uint32_t mask = up_pwm_servo_get_rate_group(group); diff --git a/src/modules/px4iofirmware/serial.c b/src/modules/px4iofirmware/serial.c new file mode 100644 index 000000000..94d7407df --- /dev/null +++ b/src/modules/px4iofirmware/serial.c @@ -0,0 +1,352 @@ +/**************************************************************************** + * + * Copyright (C) 2012,2013 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file serial.c + * + * Serial communication for the PX4IO module. + */ + +#include <stdint.h> +#include <unistd.h> +#include <termios.h> +#include <fcntl.h> +#include <string.h> + +#include <nuttx/arch.h> +#include <arch/board/board.h> + +/* XXX might be able to prune these */ +#include <chip.h> +#include <up_internal.h> +#include <up_arch.h> +#include <stm32.h> +#include <systemlib/perf_counter.h> + +//#define DEBUG +#include "px4io.h" + +static perf_counter_t pc_txns; +static perf_counter_t pc_errors; +static perf_counter_t pc_ore; +static perf_counter_t pc_fe; +static perf_counter_t pc_ne; +static perf_counter_t pc_idle; +static perf_counter_t pc_badidle; +static perf_counter_t pc_regerr; +static perf_counter_t pc_crcerr; + +static void rx_handle_packet(void); +static void rx_dma_callback(DMA_HANDLE handle, uint8_t status, void *arg); +static DMA_HANDLE tx_dma; +static DMA_HANDLE rx_dma; + +static int serial_interrupt(int irq, void *context); +static void dma_reset(void); + +/* if we spend this many ticks idle, reset the DMA */ +static unsigned idle_ticks; + +static struct IOPacket dma_packet; + +/* serial register accessors */ +#define REG(_x) (*(volatile uint32_t *)(PX4FMU_SERIAL_BASE + _x)) +#define rSR REG(STM32_USART_SR_OFFSET) +#define rDR REG(STM32_USART_DR_OFFSET) +#define rBRR REG(STM32_USART_BRR_OFFSET) +#define rCR1 REG(STM32_USART_CR1_OFFSET) +#define rCR2 REG(STM32_USART_CR2_OFFSET) +#define rCR3 REG(STM32_USART_CR3_OFFSET) +#define rGTPR REG(STM32_USART_GTPR_OFFSET) + +void +interface_init(void) +{ + pc_txns = perf_alloc(PC_ELAPSED, "txns"); + pc_errors = perf_alloc(PC_COUNT, "errors"); + pc_ore = perf_alloc(PC_COUNT, "overrun"); + pc_fe = perf_alloc(PC_COUNT, "framing"); + pc_ne = perf_alloc(PC_COUNT, "noise"); + pc_idle = perf_alloc(PC_COUNT, "idle"); + pc_badidle = perf_alloc(PC_COUNT, "badidle"); + pc_regerr = perf_alloc(PC_COUNT, "regerr"); + pc_crcerr = perf_alloc(PC_COUNT, "crcerr"); + + /* allocate DMA */ + tx_dma = stm32_dmachannel(PX4FMU_SERIAL_TX_DMA); + rx_dma = stm32_dmachannel(PX4FMU_SERIAL_RX_DMA); + + /* configure pins for serial use */ + stm32_configgpio(PX4FMU_SERIAL_TX_GPIO); + stm32_configgpio(PX4FMU_SERIAL_RX_GPIO); + + /* reset and configure the UART */ + rCR1 = 0; + rCR2 = 0; + rCR3 = 0; + + /* clear status/errors */ + (void)rSR; + (void)rDR; + + /* configure line speed */ + uint32_t usartdiv32 = PX4FMU_SERIAL_CLOCK / (PX4FMU_SERIAL_BITRATE / 2); + uint32_t mantissa = usartdiv32 >> 5; + uint32_t fraction = (usartdiv32 - (mantissa << 5) + 1) >> 1; + rBRR = (mantissa << USART_BRR_MANT_SHIFT) | (fraction << USART_BRR_FRAC_SHIFT); + + /* connect our interrupt */ + irq_attach(PX4FMU_SERIAL_VECTOR, serial_interrupt); + up_enable_irq(PX4FMU_SERIAL_VECTOR); + + /* enable UART and error/idle interrupts */ + rCR3 = USART_CR3_EIE; + rCR1 = USART_CR1_RE | USART_CR1_TE | USART_CR1_UE | USART_CR1_IDLEIE; + +#if 0 /* keep this for signal integrity testing */ + for (;;) { + while (!(rSR & USART_SR_TXE)) + ; + rDR = 0xfa; + while (!(rSR & USART_SR_TXE)) + ; + rDR = 0xa0; + } +#endif + + /* configure RX DMA and return to listening state */ + dma_reset(); + + debug("serial init"); +} + +void +interface_tick() +{ + /* XXX look for stuck/damaged DMA and reset? */ + if (idle_ticks++ > 100) { + dma_reset(); + idle_ticks = 0; + } +} + +static void +rx_handle_packet(void) +{ + /* check packet CRC */ + uint8_t crc = dma_packet.crc; + dma_packet.crc = 0; + if (crc != crc_packet(&dma_packet)) { + perf_count(pc_crcerr); + + /* send a CRC error reply */ + dma_packet.count_code = PKT_CODE_CORRUPT; + dma_packet.page = 0xff; + dma_packet.offset = 0xff; + + return; + } + + if (PKT_CODE(dma_packet) == PKT_CODE_WRITE) { + + /* it's a blind write - pass it on */ + if (registers_set(dma_packet.page, dma_packet.offset, &dma_packet.regs[0], PKT_COUNT(dma_packet))) { + perf_count(pc_regerr); + dma_packet.count_code = PKT_CODE_ERROR; + } else { + dma_packet.count_code = PKT_CODE_SUCCESS; + } + return; + } + + if (PKT_CODE(dma_packet) == PKT_CODE_READ) { + + /* it's a read - get register pointer for reply */ + unsigned count; + uint16_t *registers; + + if (registers_get(dma_packet.page, dma_packet.offset, ®isters, &count) < 0) { + perf_count(pc_regerr); + dma_packet.count_code = PKT_CODE_ERROR; + } else { + /* constrain reply to requested size */ + if (count > PKT_MAX_REGS) + count = PKT_MAX_REGS; + if (count > PKT_COUNT(dma_packet)) + count = PKT_COUNT(dma_packet); + + /* copy reply registers into DMA buffer */ + memcpy((void *)&dma_packet.regs[0], registers, count * 2); + dma_packet.count_code = count | PKT_CODE_SUCCESS; + } + return; + } + + /* send a bad-packet error reply */ + dma_packet.count_code = PKT_CODE_CORRUPT; + dma_packet.page = 0xff; + dma_packet.offset = 0xfe; +} + +static void +rx_dma_callback(DMA_HANDLE handle, uint8_t status, void *arg) +{ + /* + * We are here because DMA completed, or UART reception stopped and + * we think we have a packet in the buffer. + */ + perf_begin(pc_txns); + + /* disable UART DMA */ + rCR3 &= ~(USART_CR3_DMAT | USART_CR3_DMAR); + + /* reset the idle counter */ + idle_ticks = 0; + + /* handle the received packet */ + rx_handle_packet(); + + /* re-set DMA for reception first, so we are ready to receive before we start sending */ + dma_reset(); + + /* send the reply to the just-processed request */ + dma_packet.crc = 0; + dma_packet.crc = crc_packet(&dma_packet); + stm32_dmasetup( + tx_dma, + (uint32_t)&rDR, + (uint32_t)&dma_packet, + PKT_SIZE(dma_packet), + DMA_CCR_DIR | + DMA_CCR_MINC | + DMA_CCR_PSIZE_8BITS | + DMA_CCR_MSIZE_8BITS); + stm32_dmastart(tx_dma, NULL, NULL, false); + rCR3 |= USART_CR3_DMAT; + + perf_end(pc_txns); +} + +static int +serial_interrupt(int irq, void *context) +{ + static bool abort_on_idle = false; + + uint32_t sr = rSR; /* get UART status register */ + (void)rDR; /* required to clear any of the interrupt status that brought us here */ + + if (sr & (USART_SR_ORE | /* overrun error - packet was too big for DMA or DMA was too slow */ + USART_SR_NE | /* noise error - we have lost a byte due to noise */ + USART_SR_FE)) { /* framing error - start/stop bit lost or line break */ + + perf_count(pc_errors); + if (sr & USART_SR_ORE) + perf_count(pc_ore); + if (sr & USART_SR_NE) + perf_count(pc_ne); + if (sr & USART_SR_FE) + perf_count(pc_fe); + + /* send a line break - this will abort transmission/reception on the other end */ + rCR1 |= USART_CR1_SBK; + + /* when the line goes idle, abort rather than look at the packet */ + abort_on_idle = true; + } + + if (sr & USART_SR_IDLE) { + + /* + * If we saw an error, don't bother looking at the packet - it should have + * been aborted by the sender and will definitely be bad. Get the DMA reconfigured + * ready for their retry. + */ + if (abort_on_idle) { + + abort_on_idle = false; + dma_reset(); + return 0; + } + + /* + * The sender has stopped sending - this is probably the end of a packet. + * Check the received length against the length in the header to see if + * we have something that looks like a packet. + */ + unsigned length = sizeof(dma_packet) - stm32_dmaresidual(rx_dma); + if ((length < 1) || (length < PKT_SIZE(dma_packet))) { + + /* it was too short - possibly truncated */ + perf_count(pc_badidle); + return 0; + } + + /* + * Looks like we received a packet. Stop the DMA and go process the + * packet. + */ + perf_count(pc_idle); + stm32_dmastop(rx_dma); + rx_dma_callback(rx_dma, DMA_STATUS_TCIF, NULL); + } + + return 0; +} + +static void +dma_reset(void) +{ + rCR3 &= ~(USART_CR3_DMAT | USART_CR3_DMAR); + (void)rSR; + (void)rDR; + (void)rDR; + + /* kill any pending DMA */ + stm32_dmastop(tx_dma); + stm32_dmastop(rx_dma); + + /* reset the RX side */ + stm32_dmasetup( + rx_dma, + (uint32_t)&rDR, + (uint32_t)&dma_packet, + sizeof(dma_packet), + DMA_CCR_MINC | + DMA_CCR_PSIZE_8BITS | + DMA_CCR_MSIZE_8BITS); + + /* start receive DMA ready for the next packet */ + stm32_dmastart(rx_dma, rx_dma_callback, NULL, false); + rCR3 |= USART_CR3_DMAR; +} + diff --git a/src/modules/sensors/sensor_params.c b/src/modules/sensors/sensor_params.c index 133cda8d6..ba4d2186c 100644 --- a/src/modules/sensors/sensor_params.c +++ b/src/modules/sensors/sensor_params.c @@ -68,7 +68,7 @@ PARAM_DEFINE_FLOAT(SENS_ACC_XSCALE, 1.0f); PARAM_DEFINE_FLOAT(SENS_ACC_YSCALE, 1.0f); PARAM_DEFINE_FLOAT(SENS_ACC_ZSCALE, 1.0f); -PARAM_DEFINE_FLOAT(SENS_DPRES_OFF, 1667); +PARAM_DEFINE_FLOAT(SENS_DPRES_OFF, 0); PARAM_DEFINE_FLOAT(RC1_MIN, 1000.0f); PARAM_DEFINE_FLOAT(RC1_TRIM, 1500.0f); @@ -157,8 +157,12 @@ PARAM_DEFINE_FLOAT(RC14_DZ, 0.0f); PARAM_DEFINE_INT32(RC_TYPE, 1); /** 1 = FUTABA, 2 = Spektrum, 3 = Graupner HoTT, 4 = Turnigy 9x */ PARAM_DEFINE_INT32(RC_RL1_DSM_VCC, 0); /* Relay 1 controls DSM VCC */ +#ifdef CONFIG_ARCH_BOARD_PX4FMU_V2 +PARAM_DEFINE_FLOAT(BAT_V_SCALING, 0.0082f); +#else /* default is conversion factor for the PX4IO / PX4IOAR board, the factor for PX4FMU standalone is different */ PARAM_DEFINE_FLOAT(BAT_V_SCALING, (3.3f * 52.0f / 5.0f / 4095.0f)); +#endif PARAM_DEFINE_INT32(RC_MAP_ROLL, 1); PARAM_DEFINE_INT32(RC_MAP_PITCH, 2); diff --git a/src/modules/systemlib/systemlib.c b/src/modules/systemlib/systemlib.c index 3283aad8a..57a751e1c 100644 --- a/src/modules/systemlib/systemlib.c +++ b/src/modules/systemlib/systemlib.c @@ -43,13 +43,29 @@ #include <fcntl.h> #include <sched.h> #include <signal.h> -#include <sys/stat.h> #include <unistd.h> #include <float.h> #include <string.h> +#include <sys/stat.h> +#include <sys/types.h> + +#include <stm32_pwr.h> + #include "systemlib.h" +void +systemreset(bool to_bootloader) +{ + if (to_bootloader) { + stm32_pwr_enablebkp(); + + /* XXX wow, this is evil - write a magic number into backup register zero */ + *(uint32_t *)0x40002850 = 0xb007b007; + } + up_systemreset(); +} + static void kill_task(FAR struct tcb_s *tcb, FAR void *arg); void killall() diff --git a/src/modules/systemlib/systemlib.h b/src/modules/systemlib/systemlib.h index 0194b5e52..3728f2067 100644 --- a/src/modules/systemlib/systemlib.h +++ b/src/modules/systemlib/systemlib.h @@ -42,11 +42,11 @@ #include <float.h> #include <stdint.h> -/** Reboots the board */ -extern void up_systemreset(void) noreturn_function; - __BEGIN_DECLS +/** Reboots the board */ +__EXPORT void systemreset(bool to_bootloader) noreturn_function; + /** Sends SIGUSR1 to all processes */ __EXPORT void killall(void); |