diff options
Diffstat (limited to 'src/systemcmds/eeprom')
-rw-r--r-- | src/systemcmds/eeprom/24xxxx_mtd.c | 571 | ||||
-rw-r--r-- | src/systemcmds/eeprom/eeprom.c | 265 | ||||
-rw-r--r-- | src/systemcmds/eeprom/module.mk | 6 |
3 files changed, 842 insertions, 0 deletions
diff --git a/src/systemcmds/eeprom/24xxxx_mtd.c b/src/systemcmds/eeprom/24xxxx_mtd.c new file mode 100644 index 000000000..e34be44e3 --- /dev/null +++ b/src/systemcmds/eeprom/24xxxx_mtd.c @@ -0,0 +1,571 @@ +/************************************************************************************ + * Driver for 24xxxx-style I2C EEPROMs. + * + * Adapted from: + * + * drivers/mtd/at24xx.c + * Driver for I2C-based at24cxx EEPROM(at24c32,at24c64,at24c128,at24c256) + * + * Copyright (C) 2011 Li Zhuoyi. All rights reserved. + * Author: Li Zhuoyi <lzyy.cn@gmail.com> + * History: 0.1 2011-08-20 initial version + * + * 2011-11-1 Added support for larger MTD block sizes: Hal Glenn <hglenn@2g-eng.com> + * + * Derived from drivers/mtd/m25px.c + * + * Copyright (C) 2009-2011 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include <nuttx/config.h> + +#include <sys/types.h> +#include <stdint.h> +#include <stdbool.h> +#include <stdlib.h> +#include <unistd.h> +#include <string.h> +#include <errno.h> +#include <debug.h> + +#include <nuttx/kmalloc.h> +#include <nuttx/fs/ioctl.h> +#include <nuttx/i2c.h> +#include <nuttx/mtd.h> + +#include "systemlib/perf_counter.h" + +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ + +/* + * Configuration is as for the AT24 driver, but the CONFIG_MTD_AT24XX define should be + * omitted in order to avoid building the AT24XX driver as well. + */ + +/* As a minimum, the size of the AT24 part and its 7-bit I2C address are required. */ + +#ifndef CONFIG_AT24XX_SIZE +# warning "Assuming AT24 size 64" +# define CONFIG_AT24XX_SIZE 64 +#endif +#ifndef CONFIG_AT24XX_ADDR +# warning "Assuming AT24 address of 0x50" +# define CONFIG_AT24XX_ADDR 0x50 +#endif + +/* Get the part configuration based on the size configuration */ + +#if CONFIG_AT24XX_SIZE == 32 +# define AT24XX_NPAGES 128 +# define AT24XX_PAGESIZE 32 +#elif CONFIG_AT24XX_SIZE == 48 +# define AT24XX_NPAGES 192 +# define AT24XX_PAGESIZE 32 +#elif CONFIG_AT24XX_SIZE == 64 +# define AT24XX_NPAGES 256 +# define AT24XX_PAGESIZE 32 +#elif CONFIG_AT24XX_SIZE == 128 +# define AT24XX_NPAGES 256 +# define AT24XX_PAGESIZE 64 +#elif CONFIG_AT24XX_SIZE == 256 +# define AT24XX_NPAGES 512 +# define AT24XX_PAGESIZE 64 +#endif + +/* For applications where a file system is used on the AT24, the tiny page sizes + * will result in very inefficient FLASH usage. In such cases, it is better if + * blocks are comprised of "clusters" of pages so that the file system block + * size is, say, 256 or 512 bytes. In any event, the block size *must* be an + * even multiple of the pages. + */ + +#ifndef CONFIG_AT24XX_MTD_BLOCKSIZE +# warning "Assuming driver block size is the same as the FLASH page size" +# define CONFIG_AT24XX_MTD_BLOCKSIZE AT24XX_PAGESIZE +#endif + +/* The AT24 does not respond on the bus during write cycles, so we depend on a long + * timeout to detect problems. The max program time is typically ~5ms. + */ +#ifndef CONFIG_AT24XX_WRITE_TIMEOUT_MS +# define CONFIG_AT24XX_WRITE_TIMEOUT_MS 20 +#endif + +/************************************************************************************ + * Private Types + ************************************************************************************/ + +/* This type represents the state of the MTD device. The struct mtd_dev_s + * must appear at the beginning of the definition so that you can freely + * cast between pointers to struct mtd_dev_s and struct at24c_dev_s. + */ + +struct at24c_dev_s { + struct mtd_dev_s mtd; /* MTD interface */ + FAR struct i2c_dev_s *dev; /* Saved I2C interface instance */ + uint8_t addr; /* I2C address */ + uint16_t pagesize; /* 32, 63 */ + uint16_t npages; /* 128, 256, 512, 1024 */ + + perf_counter_t perf_reads; + perf_counter_t perf_writes; + perf_counter_t perf_resets; + perf_counter_t perf_read_retries; + perf_counter_t perf_read_errors; + perf_counter_t perf_write_errors; +}; + +/************************************************************************************ + * Private Function Prototypes + ************************************************************************************/ + +/* MTD driver methods */ + +static int at24c_erase(FAR struct mtd_dev_s *dev, off_t startblock, size_t nblocks); +static ssize_t at24c_bread(FAR struct mtd_dev_s *dev, off_t startblock, + size_t nblocks, FAR uint8_t *buf); +static ssize_t at24c_bwrite(FAR struct mtd_dev_s *dev, off_t startblock, + size_t nblocks, FAR const uint8_t *buf); +static int at24c_ioctl(FAR struct mtd_dev_s *dev, int cmd, unsigned long arg); + +void at24c_test(void); + +/************************************************************************************ + * Private Data + ************************************************************************************/ + +/* At present, only a single AT24 part is supported. In this case, a statically + * allocated state structure may be used. + */ + +static struct at24c_dev_s g_at24c; + +/************************************************************************************ + * Private Functions + ************************************************************************************/ + +static int at24c_eraseall(FAR struct at24c_dev_s *priv) +{ + int startblock = 0; + uint8_t buf[AT24XX_PAGESIZE + 2]; + + struct i2c_msg_s msgv[1] = { + { + .addr = priv->addr, + .flags = 0, + .buffer = &buf[0], + .length = sizeof(buf), + } + }; + + memset(&buf[2], 0xff, priv->pagesize); + + for (startblock = 0; startblock < priv->npages; startblock++) { + uint16_t offset = startblock * priv->pagesize; + buf[1] = offset & 0xff; + buf[0] = (offset >> 8) & 0xff; + + while (I2C_TRANSFER(priv->dev, &msgv[0], 1) < 0) { + fvdbg("erase stall\n"); + usleep(10000); + } + } + + return OK; +} + +/************************************************************************************ + * Name: at24c_erase + ************************************************************************************/ + +static int at24c_erase(FAR struct mtd_dev_s *dev, off_t startblock, size_t nblocks) +{ + /* EEprom need not erase */ + + return (int)nblocks; +} + +/************************************************************************************ + * Name: at24c_test + ************************************************************************************/ + +void at24c_test(void) +{ + uint8_t buf[CONFIG_AT24XX_MTD_BLOCKSIZE]; + unsigned count = 0; + unsigned errors = 0; + + for (count = 0; count < 10000; count++) { + ssize_t result = at24c_bread(&g_at24c.mtd, 0, 1, buf); + if (result == ERROR) { + if (errors++ > 2) { + vdbg("too many errors\n"); + return; + } + } else if (result != 1) { + vdbg("unexpected %u\n", result); + } + if ((count % 100) == 0) + vdbg("test %u errors %u\n", count, errors); + } +} + +/************************************************************************************ + * Name: at24c_bread + ************************************************************************************/ + +static ssize_t at24c_bread(FAR struct mtd_dev_s *dev, off_t startblock, + size_t nblocks, FAR uint8_t *buffer) +{ + FAR struct at24c_dev_s *priv = (FAR struct at24c_dev_s *)dev; + size_t blocksleft; + uint8_t addr[2]; + int ret; + + struct i2c_msg_s msgv[2] = { + { + .addr = priv->addr, + .flags = 0, + .buffer = &addr[0], + .length = sizeof(addr), + }, + { + .addr = priv->addr, + .flags = I2C_M_READ, + .buffer = 0, + .length = priv->pagesize, + } + }; + +#if CONFIG_AT24XX_MTD_BLOCKSIZE > AT24XX_PAGESIZE + startblock *= (CONFIG_AT24XX_MTD_BLOCKSIZE / AT24XX_PAGESIZE); + nblocks *= (CONFIG_AT24XX_MTD_BLOCKSIZE / AT24XX_PAGESIZE); +#endif + blocksleft = nblocks; + + fvdbg("startblock: %08lx nblocks: %d\n", (long)startblock, (int)nblocks); + + if (startblock >= priv->npages) { + return 0; + } + + if (startblock + nblocks > priv->npages) { + nblocks = priv->npages - startblock; + } + + while (blocksleft-- > 0) { + uint16_t offset = startblock * priv->pagesize; + unsigned tries = CONFIG_AT24XX_WRITE_TIMEOUT_MS; + + addr[1] = offset & 0xff; + addr[0] = (offset >> 8) & 0xff; + msgv[1].buffer = buffer; + + for (;;) { + + perf_begin(priv->perf_reads); + ret = I2C_TRANSFER(priv->dev, &msgv[0], 2); + perf_end(priv->perf_reads); + + if (ret >= 0) + break; + + fvdbg("read stall"); + usleep(1000); + + /* We should normally only be here on the first read after + * a write. + * + * XXX maybe do special first-read handling with optional + * bus reset as well? + */ + perf_count(priv->perf_read_retries); + + if (--tries == 0) { + perf_count(priv->perf_read_errors); + return ERROR; + } + } + + startblock++; + buffer += priv->pagesize; + } + +#if CONFIG_AT24XX_MTD_BLOCKSIZE > AT24XX_PAGESIZE + return nblocks / (CONFIG_AT24XX_MTD_BLOCKSIZE / AT24XX_PAGESIZE); +#else + return nblocks; +#endif +} + +/************************************************************************************ + * Name: at24c_bwrite + * + * Operates on MTD block's and translates to FLASH pages + * + ************************************************************************************/ + +static ssize_t at24c_bwrite(FAR struct mtd_dev_s *dev, off_t startblock, size_t nblocks, + FAR const uint8_t *buffer) +{ + FAR struct at24c_dev_s *priv = (FAR struct at24c_dev_s *)dev; + size_t blocksleft; + uint8_t buf[AT24XX_PAGESIZE + 2]; + int ret; + + struct i2c_msg_s msgv[1] = { + { + .addr = priv->addr, + .flags = 0, + .buffer = &buf[0], + .length = sizeof(buf), + } + }; + +#if CONFIG_AT24XX_MTD_BLOCKSIZE > AT24XX_PAGESIZE + startblock *= (CONFIG_AT24XX_MTD_BLOCKSIZE / AT24XX_PAGESIZE); + nblocks *= (CONFIG_AT24XX_MTD_BLOCKSIZE / AT24XX_PAGESIZE); +#endif + blocksleft = nblocks; + + if (startblock >= priv->npages) { + return 0; + } + + if (startblock + nblocks > priv->npages) { + nblocks = priv->npages - startblock; + } + + fvdbg("startblock: %08lx nblocks: %d\n", (long)startblock, (int)nblocks); + + while (blocksleft-- > 0) { + uint16_t offset = startblock * priv->pagesize; + unsigned tries = CONFIG_AT24XX_WRITE_TIMEOUT_MS; + + buf[1] = offset & 0xff; + buf[0] = (offset >> 8) & 0xff; + memcpy(&buf[2], buffer, priv->pagesize); + + for (;;) { + + perf_begin(priv->perf_writes); + ret = I2C_TRANSFER(priv->dev, &msgv[0], 1); + perf_end(priv->perf_writes); + + if (ret >= 0) + break; + + fvdbg("write stall"); + usleep(1000); + + /* We expect to see a number of retries per write cycle as we + * poll for write completion. + */ + if (--tries == 0) { + perf_count(priv->perf_write_errors); + return ERROR; + } + } + + startblock++; + buffer += priv->pagesize; + } + +#if CONFIG_AT24XX_MTD_BLOCKSIZE > AT24XX_PAGESIZE + return nblocks / (CONFIG_AT24XX_MTD_BLOCKSIZE / AT24XX_PAGESIZE); +#else + return nblocks; +#endif +} + +/************************************************************************************ + * Name: at24c_ioctl + ************************************************************************************/ + +static int at24c_ioctl(FAR struct mtd_dev_s *dev, int cmd, unsigned long arg) +{ + FAR struct at24c_dev_s *priv = (FAR struct at24c_dev_s *)dev; + int ret = -EINVAL; /* Assume good command with bad parameters */ + + fvdbg("cmd: %d \n", cmd); + + switch (cmd) { + case MTDIOC_GEOMETRY: { + FAR struct mtd_geometry_s *geo = (FAR struct mtd_geometry_s *)((uintptr_t)arg); + + if (geo) { + /* Populate the geometry structure with information need to know + * the capacity and how to access the device. + * + * NOTE: that the device is treated as though it where just an array + * of fixed size blocks. That is most likely not true, but the client + * will expect the device logic to do whatever is necessary to make it + * appear so. + * + * blocksize: + * May be user defined. The block size for the at24XX devices may be + * larger than the page size in order to better support file systems. + * The read and write functions translate BLOCKS to pages for the + * small flash devices + * erasesize: + * It has to be at least as big as the blocksize, bigger serves no + * purpose. + * neraseblocks + * Note that the device size is in kilobits and must be scaled by + * 1024 / 8 + */ + +#if CONFIG_AT24XX_MTD_BLOCKSIZE > AT24XX_PAGESIZE + geo->blocksize = CONFIG_AT24XX_MTD_BLOCKSIZE; + geo->erasesize = CONFIG_AT24XX_MTD_BLOCKSIZE; + geo->neraseblocks = (CONFIG_AT24XX_SIZE * 1024 / 8) / CONFIG_AT24XX_MTD_BLOCKSIZE; +#else + geo->blocksize = priv->pagesize; + geo->erasesize = priv->pagesize; + geo->neraseblocks = priv->npages; +#endif + ret = OK; + + fvdbg("blocksize: %d erasesize: %d neraseblocks: %d\n", + geo->blocksize, geo->erasesize, geo->neraseblocks); + } + } + break; + + case MTDIOC_BULKERASE: + ret = at24c_eraseall(priv); + break; + + case MTDIOC_XIPBASE: + default: + ret = -ENOTTY; /* Bad command */ + break; + } + + return ret; +} + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: at24c_initialize + * + * Description: + * Create an initialize MTD device instance. MTD devices are not registered + * in the file system, but are created as instances that can be bound to + * other functions (such as a block or character driver front end). + * + ************************************************************************************/ + +FAR struct mtd_dev_s *at24c_initialize(FAR struct i2c_dev_s *dev) { + FAR struct at24c_dev_s *priv; + + fvdbg("dev: %p\n", dev); + + /* Allocate a state structure (we allocate the structure instead of using + * a fixed, static allocation so that we can handle multiple FLASH devices. + * The current implementation would handle only one FLASH part per I2C + * device (only because of the SPIDEV_FLASH definition) and so would have + * to be extended to handle multiple FLASH parts on the same I2C bus. + */ + + priv = &g_at24c; + + if (priv) { + /* Initialize the allocated structure */ + + priv->addr = CONFIG_AT24XX_ADDR; + priv->pagesize = AT24XX_PAGESIZE; + priv->npages = AT24XX_NPAGES; + + priv->mtd.erase = at24c_erase; + priv->mtd.bread = at24c_bread; + priv->mtd.bwrite = at24c_bwrite; + priv->mtd.ioctl = at24c_ioctl; + priv->dev = dev; + + priv->perf_reads = perf_alloc(PC_ELAPSED, "EEPROM read"); + priv->perf_writes = perf_alloc(PC_ELAPSED, "EEPROM write"); + priv->perf_resets = perf_alloc(PC_COUNT, "EEPROM reset"); + priv->perf_read_retries = perf_alloc(PC_COUNT, "EEPROM read retries"); + priv->perf_read_errors = perf_alloc(PC_COUNT, "EEPROM read errors"); + priv->perf_write_errors = perf_alloc(PC_COUNT, "EEPROM write errors"); + } + + /* attempt to read to validate device is present */ + unsigned char buf[5]; + uint8_t addrbuf[2] = {0, 0}; + + struct i2c_msg_s msgv[2] = { + { + .addr = priv->addr, + .flags = 0, + .buffer = &addrbuf[0], + .length = sizeof(addrbuf), + }, + { + .addr = priv->addr, + .flags = I2C_M_READ, + .buffer = &buf[0], + .length = sizeof(buf), + } + }; + + perf_begin(priv->perf_reads); + int ret = I2C_TRANSFER(priv->dev, &msgv[0], 2); + perf_end(priv->perf_reads); + + if (ret < 0) { + return NULL; + } + + /* Return the implementation-specific state structure as the MTD device */ + + fvdbg("Return %p\n", priv); + return (FAR struct mtd_dev_s *)priv; +} + +/* + * XXX: debug hackery + */ +int at24c_nuke(void) +{ + return at24c_eraseall(&g_at24c); +} diff --git a/src/systemcmds/eeprom/eeprom.c b/src/systemcmds/eeprom/eeprom.c new file mode 100644 index 000000000..49da51358 --- /dev/null +++ b/src/systemcmds/eeprom/eeprom.c @@ -0,0 +1,265 @@ +/**************************************************************************** + * + * Copyright (C) 2012 PX4 Development Team. All rights reserved. + * Author: Lorenz Meier <lm@inf.ethz.ch> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file eeprom.c + * + * EEPROM service and utility app. + */ + +#include <nuttx/config.h> + +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <stdbool.h> +#include <unistd.h> +#include <fcntl.h> +#include <sys/mount.h> +#include <sys/ioctl.h> +#include <sys/stat.h> + +#include <nuttx/i2c.h> +#include <nuttx/mtd.h> +#include <nuttx/fs/nxffs.h> +#include <nuttx/fs/ioctl.h> + +#include <arch/board/board.h> + +#include "systemlib/systemlib.h" +#include "systemlib/param/param.h" +#include "systemlib/err.h" + +#ifndef PX4_I2C_BUS_ONBOARD +# error PX4_I2C_BUS_ONBOARD not defined, cannot locate onboard EEPROM +#endif + +__EXPORT int eeprom_main(int argc, char *argv[]); + +static void eeprom_attach(void); +static void eeprom_start(void); +static void eeprom_erase(void); +static void eeprom_ioctl(unsigned operation); +static void eeprom_save(const char *name); +static void eeprom_load(const char *name); +static void eeprom_test(void); + +static bool attached = false; +static bool started = false; +static struct mtd_dev_s *eeprom_mtd; + +int eeprom_main(int argc, char *argv[]) +{ + if (argc >= 2) { + if (!strcmp(argv[1], "start")) + eeprom_start(); + + if (!strcmp(argv[1], "save_param")) + eeprom_save(argv[2]); + + if (!strcmp(argv[1], "load_param")) + eeprom_load(argv[2]); + + if (!strcmp(argv[1], "erase")) + eeprom_erase(); + + if (!strcmp(argv[1], "test")) + eeprom_test(); + + if (0) { /* these actually require a file on the filesystem... */ + + if (!strcmp(argv[1], "reformat")) + eeprom_ioctl(FIOC_REFORMAT); + + if (!strcmp(argv[1], "repack")) + eeprom_ioctl(FIOC_OPTIMIZE); + } + } + + errx(1, "expected a command, try 'start'\n\t'save_param /eeprom/parameters'\n\t'load_param /eeprom/parameters'\n\t'erase'\n"); +} + + +static void +eeprom_attach(void) +{ + /* find the right I2C */ + struct i2c_dev_s *i2c = up_i2cinitialize(PX4_I2C_BUS_ONBOARD); + /* this resets the I2C bus, set correct bus speed again */ + I2C_SETFREQUENCY(i2c, 400000); + + if (i2c == NULL) + errx(1, "failed to locate I2C bus"); + + /* start the MTD driver, attempt 5 times */ + for (int i = 0; i < 5; i++) { + eeprom_mtd = at24c_initialize(i2c); + if (eeprom_mtd) { + /* abort on first valid result */ + if (i > 0) { + warnx("warning: EEPROM needed %d attempts to attach", i+1); + } + break; + } + } + + /* if last attempt is still unsuccessful, abort */ + if (eeprom_mtd == NULL) + errx(1, "failed to initialize EEPROM driver"); + + attached = true; +} + +static void +eeprom_start(void) +{ + int ret; + + if (started) + errx(1, "EEPROM already mounted"); + + if (!attached) + eeprom_attach(); + + /* start NXFFS */ + ret = nxffs_initialize(eeprom_mtd); + + if (ret < 0) + errx(1, "failed to initialize NXFFS - erase EEPROM to reformat"); + + /* mount the EEPROM */ + ret = mount(NULL, "/eeprom", "nxffs", 0, NULL); + + if (ret < 0) + errx(1, "failed to mount /eeprom - erase EEPROM to reformat"); + + started = true; + warnx("mounted EEPROM at /eeprom"); + exit(0); +} + +extern int at24c_nuke(void); + +static void +eeprom_erase(void) +{ + if (!attached) + eeprom_attach(); + + if (at24c_nuke()) + errx(1, "erase failed"); + + errx(0, "erase done, reboot now"); +} + +static void +eeprom_ioctl(unsigned operation) +{ + int fd; + + fd = open("/eeprom/.", 0); + + if (fd < 0) + err(1, "open /eeprom"); + + if (ioctl(fd, operation, 0) < 0) + err(1, "ioctl"); + + exit(0); +} + +static void +eeprom_save(const char *name) +{ + if (!started) + errx(1, "must be started first"); + + if (!name) + err(1, "missing argument for device name, try '/eeprom/parameters'"); + + warnx("WARNING: 'eeprom save_param' deprecated - use 'param save' instead"); + + /* delete the file in case it exists */ + unlink(name); + + /* create the file */ + int fd = open(name, O_WRONLY | O_CREAT | O_EXCL); + + if (fd < 0) + err(1, "opening '%s' failed", name); + + int result = param_export(fd, false); + close(fd); + + if (result < 0) { + unlink(name); + errx(1, "error exporting to '%s'", name); + } + + exit(0); +} + +static void +eeprom_load(const char *name) +{ + if (!started) + errx(1, "must be started first"); + + if (!name) + err(1, "missing argument for device name, try '/eeprom/parameters'"); + + warnx("WARNING: 'eeprom load_param' deprecated - use 'param load' instead"); + + int fd = open(name, O_RDONLY); + + if (fd < 0) + err(1, "open '%s'", name); + + int result = param_load(fd); + close(fd); + + if (result < 0) + errx(1, "error importing from '%s'", name); + + exit(0); +} + +extern void at24c_test(void); + +static void +eeprom_test(void) +{ + at24c_test(); + exit(0); +} diff --git a/src/systemcmds/eeprom/module.mk b/src/systemcmds/eeprom/module.mk new file mode 100644 index 000000000..3b4fc0479 --- /dev/null +++ b/src/systemcmds/eeprom/module.mk @@ -0,0 +1,6 @@ +# +# EEPROM file system driver +# + +MODULE_COMMAND = eeprom +SRCS = 24xxxx_mtd.c eeprom.c |