diff options
Diffstat (limited to 'src/systemcmds/tests/test_sensors.c')
| -rw-r--r-- | src/systemcmds/tests/test_sensors.c | 297 |
1 files changed, 297 insertions, 0 deletions
diff --git a/src/systemcmds/tests/test_sensors.c b/src/systemcmds/tests/test_sensors.c new file mode 100644 index 000000000..14503276c --- /dev/null +++ b/src/systemcmds/tests/test_sensors.c @@ -0,0 +1,297 @@ +/**************************************************************************** + * + * Copyright (C) 2012 PX4 Development Team. All rights reserved. + * Author: Lorenz Meier <lm@inf.ethz.ch> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file test_sensors.c + * Tests the onboard sensors. + * + * @author Lorenz Meier <lm@inf.ethz.ch> + */ + +#include <nuttx/config.h> + +#include <sys/types.h> + +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include <fcntl.h> +#include <errno.h> +#include <debug.h> + +#include <arch/board/board.h> + +#include <nuttx/spi.h> + +#include "tests.h" + +#include <drivers/drv_gyro.h> +#include <drivers/drv_accel.h> +#include <drivers/drv_mag.h> +#include <drivers/drv_baro.h> + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ + +/**************************************************************************** + * Private Types + ****************************************************************************/ + +/**************************************************************************** + * Private Function Prototypes + ****************************************************************************/ + +static int accel(int argc, char *argv[]); +static int gyro(int argc, char *argv[]); +static int mag(int argc, char *argv[]); +static int baro(int argc, char *argv[]); + +/**************************************************************************** + * Private Data + ****************************************************************************/ + +struct { + const char *name; + const char *path; + int (* test)(int argc, char *argv[]); +} sensors[] = { + {"accel", "/dev/accel", accel}, + {"gyro", "/dev/gyro", gyro}, + {"mag", "/dev/mag", mag}, + {"baro", "/dev/baro", baro}, + {NULL, NULL, NULL} +}; + +/**************************************************************************** + * Public Data + ****************************************************************************/ + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +static int +accel(int argc, char *argv[]) +{ + printf("\tACCEL: test start\n"); + fflush(stdout); + + int fd; + struct accel_report buf; + int ret; + + fd = open("/dev/accel", O_RDONLY); + + if (fd < 0) { + printf("\tACCEL: open fail, run <mpu6000 start> or <lsm303 start> or <bma180 start> first.\n"); + return ERROR; + } + + /* wait at least 100ms, sensor should have data after no more than 20ms */ + usleep(100000); + + /* read data - expect samples */ + ret = read(fd, &buf, sizeof(buf)); + + if (ret != sizeof(buf)) { + printf("\tACCEL: read1 fail (%d)\n", ret); + return ERROR; + + } else { + printf("\tACCEL accel: x:%8.4f\ty:%8.4f\tz:%8.4f m/s^2\n", (double)buf.x, (double)buf.y, (double)buf.z); + } + + // /* wait at least 10ms, sensor should have data after no more than 2ms */ + // usleep(100000); + + // ret = read(fd, buf, sizeof(buf)); + + // if (ret != sizeof(buf)) { + // printf("\tMPU-6000: read2 fail (%d)\n", ret); + // return ERROR; + + // } else { + // printf("\tMPU-6000 values: acc: x:%d\ty:%d\tz:%d\tgyro: r:%d\tp:%d\ty:%d\n", buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]); + // } + + /* XXX more tests here */ + + /* Let user know everything is ok */ + printf("\tOK: ACCEL passed all tests successfully\n"); + + return OK; +} + +static int +gyro(int argc, char *argv[]) +{ + printf("\tGYRO: test start\n"); + fflush(stdout); + + int fd; + struct gyro_report buf; + int ret; + + fd = open("/dev/gyro", O_RDONLY); + + if (fd < 0) { + printf("\tGYRO: open fail, run <l3gd20 start> or <mpu6000 start> first.\n"); + return ERROR; + } + + /* wait at least 5 ms, sensor should have data after that */ + usleep(5000); + + /* read data - expect samples */ + ret = read(fd, &buf, sizeof(buf)); + + if (ret != sizeof(buf)) { + printf("\tGYRO: read fail (%d)\n", ret); + return ERROR; + + } else { + printf("\tGYRO rates: x:%8.4f\ty:%8.4f\tz:%8.4f rad/s\n", (double)buf.x, (double)buf.y, (double)buf.z); + } + + /* Let user know everything is ok */ + printf("\tOK: GYRO passed all tests successfully\n"); + + return OK; +} + +static int +mag(int argc, char *argv[]) +{ + printf("\tMAG: test start\n"); + fflush(stdout); + + int fd; + struct mag_report buf; + int ret; + + fd = open("/dev/mag", O_RDONLY); + + if (fd < 0) { + printf("\tMAG: open fail, run <hmc5883 start> or <lsm303 start> first.\n"); + return ERROR; + } + + /* wait at least 5 ms, sensor should have data after that */ + usleep(5000); + + /* read data - expect samples */ + ret = read(fd, &buf, sizeof(buf)); + + if (ret != sizeof(buf)) { + printf("\tMAG: read fail (%d)\n", ret); + return ERROR; + + } else { + printf("\tMAG values: x:%8.4f\ty:%8.4f\tz:%8.4f\n", (double)buf.x, (double)buf.y, (double)buf.z); + } + + /* Let user know everything is ok */ + printf("\tOK: MAG passed all tests successfully\n"); + + return OK; +} + +static int +baro(int argc, char *argv[]) +{ + printf("\tBARO: test start\n"); + fflush(stdout); + + int fd; + struct baro_report buf; + int ret; + + fd = open("/dev/baro", O_RDONLY); + + if (fd < 0) { + printf("\tBARO: open fail, run <ms5611 start> or <lps331 start> first.\n"); + return ERROR; + } + + /* wait at least 5 ms, sensor should have data after that */ + usleep(5000); + + /* read data - expect samples */ + ret = read(fd, &buf, sizeof(buf)); + + if (ret != sizeof(buf)) { + printf("\tBARO: read fail (%d)\n", ret); + return ERROR; + + } else { + printf("\tBARO pressure: %8.4f mbar\talt: %8.4f m\ttemp: %8.4f deg C\n", (double)buf.pressure, (double)buf.altitude, (double)buf.temperature); + } + + /* Let user know everything is ok */ + printf("\tOK: BARO passed all tests successfully\n"); + + return OK; +} + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: test_sensors + ****************************************************************************/ + +int test_sensors(int argc, char *argv[]) +{ + unsigned i; + + printf("Running sensors tests:\n\n"); + fflush(stdout); + + int ret = OK; + + for (i = 0; sensors[i].name; i++) { + printf(" sensor: %s\n", sensors[i].name); + + /* Flush and leave enough time for the flush to become effective */ + fflush(stdout); + usleep(50000); + /* Test the sensor - if the tests crash at this point, the right sensor name has been printed */ + + ret += sensors[i].test(argc, argv); + } + + return ret; +} |