diff options
Diffstat (limited to 'src')
-rw-r--r-- | src/drivers/airspeed/airspeed.cpp | 16 | ||||
-rw-r--r-- | src/drivers/bma180/bma180.cpp | 22 | ||||
-rw-r--r-- | src/drivers/ets_airspeed/ets_airspeed.cpp | 15 | ||||
-rw-r--r-- | src/drivers/l3gd20/l3gd20.cpp | 30 | ||||
-rw-r--r-- | src/drivers/lsm303d/lsm303d.cpp | 61 | ||||
-rw-r--r-- | src/drivers/meas_airspeed/meas_airspeed.cpp | 15 | ||||
-rw-r--r-- | src/drivers/mpu6000/mpu6000.cpp | 59 | ||||
-rw-r--r-- | src/drivers/ms5611/ms5611.cpp | 80 |
8 files changed, 186 insertions, 112 deletions
diff --git a/src/drivers/airspeed/airspeed.cpp b/src/drivers/airspeed/airspeed.cpp index 215d3792e..71c0b70f0 100644 --- a/src/drivers/airspeed/airspeed.cpp +++ b/src/drivers/airspeed/airspeed.cpp @@ -133,8 +133,20 @@ Airspeed::init() /* register alternate interfaces if we have to */ _class_instance = register_class_devname(AIRSPEED_DEVICE_PATH); - if (_airspeed_pub < 0) - warnx("failed to create airspeed sensor object. Did you start uOrb?"); + /* publication init */ + if (_class_instance == CLASS_DEVICE_PRIMARY) { + + /* advertise sensor topic, measure manually to initialize valid report */ + struct differential_pressure_s arp; + measure(); + _reports->get(&arp); + + /* measurement will have generated a report, publish */ + _airspeed_pub = orb_advertise(ORB_ID(differential_pressure), &arp); + + if (_airspeed_pub < 0) + warnx("failed to create airspeed sensor object. uORB started?"); + } ret = OK; /* sensor is ok, but we don't really know if it is within range */ diff --git a/src/drivers/bma180/bma180.cpp b/src/drivers/bma180/bma180.cpp index df4e8f998..e43a34805 100644 --- a/src/drivers/bma180/bma180.cpp +++ b/src/drivers/bma180/bma180.cpp @@ -153,6 +153,7 @@ private: float _accel_range_scale; float _accel_range_m_s2; orb_advert_t _accel_topic; + int _class_instance; unsigned _current_lowpass; unsigned _current_range; @@ -238,6 +239,7 @@ BMA180::BMA180(int bus, spi_dev_e device) : _accel_range_scale(0.0f), _accel_range_m_s2(0.0f), _accel_topic(-1), + _class_instance(-1), _current_lowpass(0), _current_range(0), _sample_perf(perf_alloc(PC_ELAPSED, "bma180_read")) @@ -282,11 +284,6 @@ BMA180::init() if (_reports == nullptr) goto out; - /* advertise sensor topic */ - struct accel_report zero_report; - memset(&zero_report, 0, sizeof(zero_report)); - _accel_topic = orb_advertise(ORB_ID(sensor_accel), &zero_report); - /* perform soft reset (p48) */ write_reg(ADDR_RESET, SOFT_RESET); @@ -322,6 +319,19 @@ BMA180::init() ret = ERROR; } + _class_instance = register_class_devname(ACCEL_DEVICE_PATH); + + /* advertise sensor topic, measure manually to initialize valid report */ + measure(); + + if (_class_instance == CLASS_DEVICE_PRIMARY) { + struct accel_report arp; + _reports->get(&arp); + + /* measurement will have generated a report, publish */ + _accel_topic = orb_advertise(ORB_ID(sensor_accel), &arp); + } + out: return ret; } @@ -723,7 +733,7 @@ BMA180::measure() poll_notify(POLLIN); /* publish for subscribers */ - if !(_pub_blocked) + if (_accel_topic > 0 && !(_pub_blocked)) orb_publish(ORB_ID(sensor_accel), _accel_topic, &report); /* stop the perf counter */ diff --git a/src/drivers/ets_airspeed/ets_airspeed.cpp b/src/drivers/ets_airspeed/ets_airspeed.cpp index cdc70ac37..8bbef5cfa 100644 --- a/src/drivers/ets_airspeed/ets_airspeed.cpp +++ b/src/drivers/ets_airspeed/ets_airspeed.cpp @@ -184,18 +184,9 @@ ETSAirspeed::collect() report.voltage = 0; report.max_differential_pressure_pa = _max_differential_pressure_pa; - /* announce the airspeed if needed, just publish else */ - if (_class_instance == CLASS_DEVICE_PRIMARY && !(_pub_blocked)) { - - if (_airspeed_pub > 0) { - /* publish it */ - orb_publish(ORB_ID(differential_pressure), _airspeed_pub, &report); - } else { - _airspeed_pub = orb_advertise(ORB_ID(differential_pressure), &report); - - if (_airspeed_pub < 0) - debug("failed to create differential_pressure publication"); - } + if (_airspeed_pub > 0 && !(_pub_blocked)) { + /* publish it */ + orb_publish(ORB_ID(differential_pressure), _airspeed_pub, &report); } new_report(report); diff --git a/src/drivers/l3gd20/l3gd20.cpp b/src/drivers/l3gd20/l3gd20.cpp index e885b1bf9..90c3db9ae 100644 --- a/src/drivers/l3gd20/l3gd20.cpp +++ b/src/drivers/l3gd20/l3gd20.cpp @@ -382,6 +382,21 @@ L3GD20::init() reset(); + measure(); + + if (_class_instance == CLASS_DEVICE_PRIMARY) { + + /* advertise sensor topic, measure manually to initialize valid report */ + struct gyro_report grp; + _reports->get(&grp); + + _gyro_topic = orb_advertise(ORB_ID(sensor_gyro), &grp); + + if (_gyro_topic < 0) + debug("failed to create sensor_gyro publication"); + + } + ret = OK; out: return ret; @@ -888,18 +903,9 @@ L3GD20::measure() poll_notify(POLLIN); /* publish for subscribers */ - if (_class_instance == CLASS_DEVICE_PRIMARY && !(_pub_blocked)) { - - if (_gyro_topic > 0) { - /* publish it */ - orb_publish(ORB_ID(sensor_gyro), _gyro_topic, &report); - } else { - _gyro_topic = orb_advertise(ORB_ID(sensor_gyro), &report); - - if (_gyro_topic < 0) - debug("failed to create sensor_gyro publication"); - } - + if (_gyro_topic > 0 && !(_pub_blocked)) { + /* publish it */ + orb_publish(ORB_ID(sensor_gyro), _gyro_topic, &report); } _read++; diff --git a/src/drivers/lsm303d/lsm303d.cpp b/src/drivers/lsm303d/lsm303d.cpp index 3bd7a66f6..4dee7649b 100644 --- a/src/drivers/lsm303d/lsm303d.cpp +++ b/src/drivers/lsm303d/lsm303d.cpp @@ -597,8 +597,39 @@ LSM303D::init() goto out; } + /* fill report structures */ + measure(); + + if (_mag->_mag_class_instance == CLASS_DEVICE_PRIMARY) { + + /* advertise sensor topic, measure manually to initialize valid report */ + struct mag_report mrp; + _mag_reports->get(&mrp); + + /* measurement will have generated a report, publish */ + _mag->_mag_topic = orb_advertise(ORB_ID(sensor_mag), &mrp); + + if (_mag->_mag_topic < 0) + debug("failed to create sensor_mag publication"); + + } + _accel_class_instance = register_class_devname(ACCEL_DEVICE_PATH); + if (_accel_class_instance == CLASS_DEVICE_PRIMARY) { + + /* advertise sensor topic, measure manually to initialize valid report */ + struct accel_report arp; + _accel_reports->get(&arp); + + /* measurement will have generated a report, publish */ + _accel_topic = orb_advertise(ORB_ID(sensor_accel), &arp); + + if (_accel_topic < 0) + debug("failed to create sensor_accel publication"); + + } + out: return ret; } @@ -1510,18 +1541,9 @@ LSM303D::measure() /* notify anyone waiting for data */ poll_notify(POLLIN); - if (_accel_class_instance == CLASS_DEVICE_PRIMARY && !(_pub_blocked)) { - - if (_accel_topic > 0) { - /* publish it */ - orb_publish(ORB_ID(sensor_accel), _accel_topic, &accel_report); - } else { - _accel_topic = orb_advertise(ORB_ID(sensor_accel), &accel_report); - - if (_accel_topic < 0) - debug("failed to create sensor_accel publication"); - } - + if (_accel_topic > 0 && !(_pub_blocked)) { + /* publish it */ + orb_publish(ORB_ID(sensor_accel), _accel_topic, &accel_report); } _accel_read++; @@ -1593,18 +1615,9 @@ LSM303D::mag_measure() /* notify anyone waiting for data */ poll_notify(POLLIN); - if (_mag->_mag_class_instance == CLASS_DEVICE_PRIMARY && !(_pub_blocked)) { - - if (_mag->_mag_topic > 0) { - /* publish it */ - orb_publish(ORB_ID(sensor_mag), _mag->_mag_topic, &mag_report); - } else { - _mag->_mag_topic = orb_advertise(ORB_ID(sensor_mag), &mag_report); - - if (_mag->_mag_topic < 0) - debug("failed to create sensor_mag publication"); - } - + if (_mag->_mag_topic > 0 && !(_pub_blocked)) { + /* publish it */ + orb_publish(ORB_ID(sensor_mag), _mag->_mag_topic, &mag_report); } _mag_read++; diff --git a/src/drivers/meas_airspeed/meas_airspeed.cpp b/src/drivers/meas_airspeed/meas_airspeed.cpp index fee13f139..51a059e39 100644 --- a/src/drivers/meas_airspeed/meas_airspeed.cpp +++ b/src/drivers/meas_airspeed/meas_airspeed.cpp @@ -216,18 +216,9 @@ MEASAirspeed::collect() report.voltage = 0; report.max_differential_pressure_pa = _max_differential_pressure_pa; - /* announce the airspeed if needed, just publish else */ - if (_class_instance == CLASS_DEVICE_PRIMARY && !(_pub_blocked)) { - - if (_airspeed_pub > 0) { - /* publish it */ - orb_publish(ORB_ID(differential_pressure), _airspeed_pub, &report); - } else { - _airspeed_pub = orb_advertise(ORB_ID(differential_pressure), &report); - - if (_airspeed_pub < 0) - debug("failed to create differential_pressure publication"); - } + if (_airspeed_pub > 0 && !(_pub_blocked)) { + /* publish it */ + orb_publish(ORB_ID(differential_pressure), _airspeed_pub, &report); } new_report(report); diff --git a/src/drivers/mpu6000/mpu6000.cpp b/src/drivers/mpu6000/mpu6000.cpp index 02fe6df4a..bf80c9cff 100644 --- a/src/drivers/mpu6000/mpu6000.cpp +++ b/src/drivers/mpu6000/mpu6000.cpp @@ -489,6 +489,35 @@ MPU6000::init() _accel_class_instance = register_class_devname(ACCEL_DEVICE_PATH); + measure(); + + if (_accel_class_instance == CLASS_DEVICE_PRIMARY) { + + /* advertise sensor topic, measure manually to initialize valid report */ + struct accel_report arp; + _accel_reports->get(&arp); + + /* measurement will have generated a report, publish */ + _accel_topic = orb_advertise(ORB_ID(sensor_accel), &arp); + + if (_accel_topic < 0) + debug("failed to create sensor_accel publication"); + + } + + if (_gyro->_gyro_class_instance == CLASS_DEVICE_PRIMARY) { + + /* advertise sensor topic, measure manually to initialize valid report */ + struct gyro_report grp; + _gyro_reports->get(&grp); + + _gyro->_gyro_topic = orb_advertise(ORB_ID(sensor_gyro), &grp); + + if (_gyro->_gyro_topic < 0) + debug("failed to create sensor_gyro publication"); + + } + out: return ret; } @@ -1297,32 +1326,14 @@ MPU6000::measure() poll_notify(POLLIN); _gyro->parent_poll_notify(); - if (_accel_class_instance == CLASS_DEVICE_PRIMARY && !(_pub_blocked)) { - - if (_accel_topic > 0) { - /* publish it */ - orb_publish(ORB_ID(sensor_accel), _accel_topic, &arb); - } else { - _accel_topic = orb_advertise(ORB_ID(sensor_accel), &arb); - - if (_accel_topic < 0) - debug("failed to create sensor_accel publication"); - } - + if (_accel_topic > 0 && !(_pub_blocked)) { + /* publish it */ + orb_publish(ORB_ID(sensor_accel), _accel_topic, &arb); } - if (_gyro->_gyro_class_instance == CLASS_DEVICE_PRIMARY && !(_pub_blocked)) { - - if (_gyro->_gyro_topic > 0) { - /* publish it */ - orb_publish(ORB_ID(sensor_gyro), _gyro->_gyro_topic, &grb); - } else { - _gyro->_gyro_topic = orb_advertise(ORB_ID(sensor_gyro), &grb); - - if (_gyro->_gyro_topic < 0) - debug("failed to create sensor_gyro publication"); - } - + if (_gyro->_gyro_topic > 0 && !(_pub_blocked)) { + /* publish it */ + orb_publish(ORB_ID(sensor_gyro), _gyro->_gyro_topic, &grb); } /* stop measuring */ diff --git a/src/drivers/ms5611/ms5611.cpp b/src/drivers/ms5611/ms5611.cpp index 089331566..0ef056273 100644 --- a/src/drivers/ms5611/ms5611.cpp +++ b/src/drivers/ms5611/ms5611.cpp @@ -90,6 +90,7 @@ static const int ERROR = -1; /* internal conversion time: 9.17 ms, so should not be read at rates higher than 100 Hz */ #define MS5611_CONVERSION_INTERVAL 10000 /* microseconds */ #define MS5611_MEASUREMENT_RATIO 3 /* pressure measurements per temperature measurement */ +#define MS5611_BARO_DEVICE_PATH "/dev/ms5611" class MS5611 : public device::CDev { @@ -194,7 +195,7 @@ protected: extern "C" __EXPORT int ms5611_main(int argc, char *argv[]); MS5611::MS5611(device::Device *interface, ms5611::prom_u &prom_buf) : - CDev("MS5611", BARO_DEVICE_PATH), + CDev("MS5611", MS5611_BARO_DEVICE_PATH), _interface(interface), _prom(prom_buf.s), _measure_ticks(0), @@ -222,7 +223,7 @@ MS5611::~MS5611() stop_cycle(); if (_class_instance != -1) - unregister_class_devname(BARO_DEVICE_PATH, _class_instance); + unregister_class_devname(MS5611_BARO_DEVICE_PATH, _class_instance); /* free any existing reports */ if (_reports != nullptr) @@ -260,7 +261,54 @@ MS5611::init() /* register alternate interfaces if we have to */ _class_instance = register_class_devname(BARO_DEVICE_PATH); - ret = OK; + struct baro_report brp; + /* do a first measurement cycle to populate reports with valid data */ + _measure_phase = 0; + _reports->flush(); + + /* this do..while is goto without goto */ + do { + /* do temperature first */ + if (OK != measure()) { + ret = -EIO; + break; + } + + usleep(MS5611_CONVERSION_INTERVAL); + + if (OK != collect()) { + ret = -EIO; + break; + } + + /* now do a pressure measurement */ + if (OK != measure()) { + ret = -EIO; + break; + } + + usleep(MS5611_CONVERSION_INTERVAL); + + if (OK != collect()) { + ret = -EIO; + break; + } + + /* state machine will have generated a report, copy it out */ + _reports->get(&brp); + + ret = OK; + + if (_class_instance == CLASS_DEVICE_PRIMARY) { + + _baro_topic = orb_advertise(ORB_ID(sensor_baro), &brp); + + if (_baro_topic < 0) + debug("failed to create sensor_baro publication"); + } + + } while (0); + out: return ret; } @@ -668,17 +716,9 @@ MS5611::collect() report.altitude = (((pow((p / p1), (-(a * R) / g))) * T1) - T1) / a; /* publish it */ - if (_class_instance == CLASS_DEVICE_PRIMARY && !(_pub_blocked)) { - - if (_baro_topic > 0) { - /* publish it */ - orb_publish(ORB_ID(sensor_baro), _baro_topic, &report); - } else { - _baro_topic = orb_advertise(ORB_ID(sensor_baro), &report); - - if (_baro_topic < 0) - debug("failed to create sensor_baro publication"); - } + if (_baro_topic > 0 && !(_pub_blocked)) { + /* publish it */ + orb_publish(ORB_ID(sensor_baro), _baro_topic, &report); } if (_reports->force(&report)) { @@ -821,7 +861,7 @@ start() goto fail; /* set the poll rate to default, starts automatic data collection */ - fd = open(BARO_DEVICE_PATH, O_RDONLY); + fd = open(MS5611_BARO_DEVICE_PATH, O_RDONLY); if (fd < 0) { warnx("can't open baro device"); goto fail; @@ -855,10 +895,10 @@ test() ssize_t sz; int ret; - int fd = open(BARO_DEVICE_PATH, O_RDONLY); + int fd = open(MS5611_BARO_DEVICE_PATH, O_RDONLY); if (fd < 0) - err(1, "%s open failed (try 'ms5611 start' if the driver is not running)", BARO_DEVICE_PATH); + err(1, "%s open failed (try 'ms5611 start' if the driver is not running)", MS5611_BARO_DEVICE_PATH); /* do a simple demand read */ sz = read(fd, &report, sizeof(report)); @@ -914,7 +954,7 @@ test() void reset() { - int fd = open(BARO_DEVICE_PATH, O_RDONLY); + int fd = open(MS5611_BARO_DEVICE_PATH, O_RDONLY); if (fd < 0) err(1, "failed "); @@ -953,10 +993,10 @@ calibrate(unsigned altitude) float pressure; float p1; - int fd = open(BARO_DEVICE_PATH, O_RDONLY); + int fd = open(MS5611_BARO_DEVICE_PATH, O_RDONLY); if (fd < 0) - err(1, "%s open failed (try 'ms5611 start' if the driver is not running)", BARO_DEVICE_PATH); + err(1, "%s open failed (try 'ms5611 start' if the driver is not running)", MS5611_BARO_DEVICE_PATH); /* start the sensor polling at max */ if (OK != ioctl(fd, SENSORIOCSPOLLRATE, SENSOR_POLLRATE_MAX)) |